6F24 / A6MF1 parts diagram
Same diagram:
A6MF1
Transmission page:
Positions:
150 total, 135 on the diagram
Parts:
388 total, 165 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 211002AF | Overhaul Kit, A6MF1/6F24 (Hyundai/Kia) 2009-Up (For Bonded Pistons Sell A211960AK) Does Not Cover Hybrid Units) | 1 |
| 002 not on diagram | Part # 211002BF | Overhaul Kit, A6LF1/A6LF2/A6LF3 (With Duraprene Valve Body Gasket) 2009-Up | — |
| 002 not on diagram | Part # 211002CW | Overhaul Kit, A6GF1 (Hyundai/Kia)(With Molded Rubber Pan Gasket) 2009-Up… | — |
| 004 not on diagram | Part # 211004B | Master L/Steels Kit, A6LF2 (Hyundai/Kia) 2009-Up | — |
| 004 not on diagram | Part # 211004CW | Master L/Steels Kit, A6GF1 2009-Up (With Molded Rubber Pan Gasket) (For Molded Rubber Pistons Sell A211960CK) | — |
| 006 not on diagram | Part # 211006BF | Master W/Steels Kit, A6LF2 (Hyundai/Kia) 2009-Up | — |
| 006 not on diagram | Part # 211006CW | Master W/Steels Kit, A6GF1 2009-Up (With Molded Rubber Pan Gasket)(For Molded Rubber Pistons Sell A211960CK) | — |
| 030 not on diagram | Part # 211030C | Bushing Kit, A6GF1/A6LF 2010-Up (Contains: 7 Bushings) | — |
| 165 not on diagram | Part # T211165A | Shift Kit, A6MF/A6GF/A6LF (Must use with A4A6-RV-TK Tool Kit) (TransGo) | — |
| 420 not on diagram | Part # 211420AK | Solenoid Kit, A6MF/A6LF (Hyundai/Kia)(6 Speed) 2009-13 (Includes 8 Solenoids & Temperature Sensor)(Teckpak) | — |
| 741 not on diagram | Part # S211741BCK | TCC Pressure Control Plunger Valve Kit | — |
| 741 not on diagram | Part # T211741ACK | Valve Kit, A6MF1/A6MF2/A6GF1/ A6LF1/2/3/6F24 (Includes TCC Control Bushing and 2 New Reducing Valves)… | — |
| 777 | Part # 211777AK | Bolt Set, A6GF1/A6MF2/6F24 Holds Pump To Stator To Case (Hex Head)(7 Pieces) 2010-Up | — |
| 778 | Part # 211778AK | Bolt Set, A6GF1/A6MF2/6F24 Holds Pump Body To Stator (Torx Head)(8 Pieces) 2010-Up | — |
| 780 | Part # 211780AK | Bolt Set, A6GF1/A6MF2 Holds Rear Cover To Case (13 Pieces) 2010-Up | — |
| 780 | Part # 211780DK | Bolt Set, 6F24 Holds Rear Cover To Case (13 Pieces) 2013-Up | — |
| 782 | Part # 211782AK | Bolt Set, A6GF1/A6MF2/6F24 Holds Valve Body To Case (Hex Head)(8 Pieces) 2010-Up | — |
| 783 | Part # 211783AK | Bolt Set, A6GF1/A6MF2/6F24 Holds Underdrive Clutch Housing #551 To Case (Torx Head) (6 Pieces) 2010-Up | — |
| 784 | Part # 211784AK | Bolt Set, A6GF1/A6MF2/6F24 Holds Underdrive Piston Housing #955 To Underdrive Clutch Housing #551 (Torx Head)(2 Pieces)… | — |
| 786 | Part # 211786AK | Bolt Set, A6MF2 Holds Ring Gear To Differential Housing (12 Pieces) 2010-Up | — |
| 786 | Part # 211786CK | Bolt Set, A6GF1 Holds Ring Gear To Differential Housing (8 Pieces) 2012-Up | — |
| 786 | Part # 211786DK | Bolt Set, 6F24 Holds Ring Gear To Differential Housing (8 Pieces) 2013-Up | — |
| 788 not on diagram | Part # 211788AK | Bolt Set, A6MF2 Holds Side Pan To Case (.685” Long)(Hex Head)(19 Pieces) 2010-Up | — |
| 788 not on diagram | Part # 211788CK | Bolt Set, A6GF1/6F24 Holds Side Pan To Case (1.335” Long)(Hex Head)(19 Pieces) 2010-Up | — |
| 960 | Part # 211960AK | Piston Kit, A6MF1/A6MF2 (Hyundai/Kia) 2009-Up | — |
| 960 | Part # 211960BK | Piston Kit, A6LF1/A6LF2/A6LF3 (Hyundai/Kia) 2009-Up | — |
| 960 | Part # 211960CK | Piston Kit, A6GF1 2009-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 211421A | Solenoid, A6GF/A6LF/A6MF (SS-A & SS-B) 2009-Up | — |
| 425 | Part # 211425A | Solenoid, A6MF/A6LF (TCC & 2-6 Clutch) 2009-13 | — |
| 425 | Part # 211425C | Solenoid, A6GF (TCC) 2009-13 | — |
| 427 | Part # 211427A | Solenoid, A6GF/A6LF/A6MF (3-5-Reverse, Underdrive & Overdrive) 2009-13 | — |
| 428 | Part # 211428A | Solenoid, A6GF/A6LF/A6MF (Line Pressure) 2009-Up | — |
| 740 | Part # 211740A | Valve Body, A6MF2 (8 Solenoid)(Cast # KN-3) 2010-Up | 1 |
| 740 | Part # 211740C | Valve Body, A6GF1 (8 Solenoid)(Cast # A6MF #5; DN-9) 2013-Up | 2 |
| 740 | Part # 211740D | Valve Body, 6F24 (8 Solenoid)(Cast # SK9 & SK12) 2013-Up | 2 |
| 991 | Part # 211991-4A | Rooster Comb, A6GF1/A6MF2/6F24 (.550”OD Shaft) 2010-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 211410A | Neutral Safety Switch, A6MF2 (5 Blade Rectangle Connector)(2 Bolt) 2010-Up | — |
| 410 | Part # 211410C | Neutral Safety Switch, A6GF1 (7 Blade Rectangle Connector)(2 Bolt)(Bow Tie Shaped Body) 2012-Up | 1 |
| 410 | Part # 211410D | Neutral Safety Switch, 6F24 (7 Blade Rectangle Connector)(2 Bolt)(Round Shaped Body) 2013-Up | — |
| 436 | Part # 211436A | Sensor, A6MF2 Input/Output (Blue Input, Black Output) 2010-Up | — |
| 436 | Part # 211436AB | Sensor, A6GF/A6MF Speed 2009-Up | — |
| 436 | Part # 211436C | Sensor, A6GF1 Input/Output (Blue Input, Yellow Output) 2012-Up | 1 |
| 436 | Part # 211436D | Sensor, A6MF2 Input/Output (Blue Input, Black Output) 2013-Up | — |
| 437 not on diagram | Part # 211437A | Sensor, A6GF/A6LF/A6MF Temperature (TOT) 2009-Up | — |
| 446 | Part # 211446A | Wire Harness, A6MF1/A6MF2 Internal (16 Pin Black Case Connector)(Includes Temperature Sensor) 2010-Up | — |
| 446 | Part # 211446B | Wire Harness, A6LF1 Internal (Gray Connector)(Includes Temperature Sensor) 2009-Up | — |
| 446 | Part # 211446C | Wire Harness, A6GF1 Internal (16 Pin Brown Case Connector) (Includes Temperature Sensor) 2012-Up | 1 |
| 446 | Part # 211446D | Wire Harness, 6F24 Internal (16 Pin Black Connector)(Includes Temperature Sensor) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 211010A | Filter, A6GF1/A6MF1/A6MF2 Plastic (6 3/4” Long)(5 1/8” Wide)(Pick-Up Is 1 9/16”OD) (5/8” Tall) 2010-Up… | 1 |
| 010 | Part # 211010B | Filter, A6LF1/A6LF2 (1/2 Metal, 1/2 Plastic)(7”Long)(6” Wide)(Pick-Up Is 1 1/4”OD)(3/4” Tall) 2010-Up | 1 |
| 010 | Part # 211010D | Filter, 6F24 (Plastic)(6 3/8” Long)(5 5/8” Wide)(Pick-Up Is 1 9/16”OD)(5/8” Tall) 2013-Up | — |
| 760 | Part # 211760C | Pan, A6GF1 Side (Plastic)(19 Bolt)(2.528”Deep) 2012-Up | 1 |
| 766 | Part # 211766D | Pan, 6F24 Side (Plastic)(19 Bolt)(2.650”Deep) 2013-Up (One Offset In The Gasket Surface) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 211070A | Seal, A6GF1/A6MF2/6F24 Front Pump Body (.235” Thick)(2.360”OD)(1.660”ID) 2010-Up | 1 |
| 070 | Part # 211070B | Seal, A6LF1/A6LF2/A6LF3 Front Pump Body (2.520”OD)(1.790”ID) | — |
| 072 not on diagram | Part # 211072A | Seal, A6GF1/A6MF2/6F24 Manual Shaft (.165” Thick)(.795”OD)(.540”ID) 2010-Up | — |
| 076 | Part # 211076A | Seal, A6MF2 Axle (Bell Housing Side)(.685” Thick)(2.765”OD)(1.545”ID) 2010-Up | — |
| 076 | Part # 211076C | Seal, A6GF1 Axle (Bell Housing Side)(.665” Thick)(2.455”OD)(1.425”ID) 2010-Up | 1 |
| 076 | Part # 211076D | Seal, 6F24 Axle (Bell Housing Side)(.665” Thick)(2.530”OD)(1.425”ID) 2013-Up | — |
| 077 | Part # 211077A | Seal, A6MF2 Axle (Case Side)(.660” Thick)(2.925”OD)(1.550”ID) 2010-Up | — |
| 077 | Part # 211077C | Seal, A6GF1 Axle (Case Side)(.685” Thick)(2.560”OD)(1.455”ID) 2012-Up | 1 |
| 077 | Part # 211077D | Seal, 6F24 Axle (Case Side)(.665” Thick)(2.645”OD)(1.415”ID) 2013-Up | — |
| 179 | Part # 211179AT | Sealing Ring, A6MF2/6F24 Stator (.078” Thick)92.235”OD)(Teflon) 2010-Up | — |
| 179 | Part # 211179CT | Sealing Ring, A6GF1 Stator (.078” Thick)(2.045”OD)(Teflon) 2012-Up | 1 |
| 183 not on diagram | Part # 211183AT | Sealing Ring, A6MF2/6F24 Input Shaft (.085” Thick)(1.020”OD)(Teflon) 2010-Up | — |
| 183 not on diagram | Part # 211183CT | Sealing Ring, A6GF1 Input Shaft (.088” Thick)(.935”OD)(Teflon) 2012-Up | 1 |
| 185 | Part # 211185AT | Sealing Ring, A6GF1/A6MF2/6F24 Rear Cover (.079”Thick)(2.005”OD)(Teflon) 2010-Up | 1 |
| 300 not on diagram | Part # 211300BF-1 | Gasket, A6LF/A6LF2/A6LF3 (Hyundai/Kia)(Duraprene) 2009-Up (Does Not Fit Hybrid) | — |
| 301 | Part # 211301CW | Gasket, A6GF1 Side Pan (Molded Rubber) 2012-Up | — |
| 301 | Part # 211301DW | Gasket, 6F24 Side Pan (Molded Rubber) 2013-Up | — |
| 311 | Part # 211311A | O-Ring, A6GF1/A6MF2/6F24 Pump Body (6.100”OD) 2010-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # S211034A | Bushing, A6GF1/A6MF2/6F24 Pump Body (.535” Wide)(1.690”ID) 2010-Up (Sonnax) | 1 |
| 036 | Part # 211036A | Bushing, A6GF1/A6MF2/6F24 Pump Stator (Front)(.550” Wide)(.895”ID) 2010-Up | — |
| 040 | Part # 211040A | Bushing, A6GF1 Overdrive Sun Gear (.460”Wide)(.780”ID) 2012-Up | — |
| 040 | Part # 211040C | Bushing, A6MF2/6F24 Underdrive Clutch (.402”Wide)(1.602”ID) 2010-Up | — |
| 043 | Part # 211043A | Bushing, A6GF1 Underdrive Clutch Hub (.402” Wide)(1.522”ID) 2012-Up | — |
| 043 | Part # 211043C | Bushing, A6GF1 Underdrive Clutch Hub (.402” Wide)(1.522”ID) 2012-Up | — |
| 056 | Part # 211056A | Bushing, A6MF2/6F24 Output Sun Gear (.470” Wide)(1.210”ID) 2010-Up | — |
| 056 | Part # 211056C | Bushing, A6GF1 Output Sun Gear (.470” Wide)(1.133”ID) 2012-Up | — |
| 211 | Part # 211211AA | Washer, A6MF2 Pump To 3-5/Reverse Drum (Black Plastic)(.173”Thick)(1.935”OD)(1.485”ID) (3 Round Tabs) 2010-Up | — |
| 211 | Part # 211211AB | Washer, A6MF2 Pump To 3-5/Reverse Drum (Black Plastic)(.182”Thick)(1.935”OD)(1.485”ID) (3 Round Tabs) 2010-Up | — |
| 211 | Part # 211211AC | Washer, A6MF2 Pump To 3-5/Reverse Drum (Black Plastic)(.189”Thick)(1.935”OD)(1.485”ID) (3 Round Tabs) 2010-Up | — |
| 211 | Part # 211211AD | Washer, A6MF2 Pump To 3-5/Reverse Drum (Black Plastic)(.197”Thick)(1.935”OD)(1.485”ID) (3 Round Tabs) 2010-Up | — |
| 211 | Part # 211211AE | Washer, A6MF2 Pump To 3-5/Reverse Drum (Black Plastic)(.205”Thick)(1.935”OD)(1.485”ID) (3 Round Tabs) 2010-Up | — |
| 211 | Part # 211211AF | Washer, A6MF2 Pump To 3-5/Reverse Drum (Black Plastic)(.212”Thick)(1.935”OD)(1.485”ID) (3 Round Tabs) 2010-Up | — |
| 211 | Part # 211211CA | Washer, A6GF1 Pump To 3-5/Reverse Drum (Black Plastic)(.087”Thick)(1.795”OD)(1.320”ID) (3 Round Tabs) 2012-Up | — |
| 211 | Part # 211211DA | Washer, 6F24 Pump To 3-5/Reverse Drum (Black Plastic)(.095”Thick)(1.925”OD)(1.485”ID) (3 Round Tabs) 2013-Up | — |
| 214 | Part # 211214A | Bearing W/Race, A6GF1/A6MF2 Overdrive Drum To Rear Cover (.130” Thick)(3.176”OD) (2.570”ID) 2010-Up | 1 |
| 214 | Part # 211214D | Bearing W/Race, 6F24 Overdrive Drum To Rear Cover (.130” Thick)(3.145”OD)(2.570”ID) 2013-Up | — |
| 215 | Part # 211215AA | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.055” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AB | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.059” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AC | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.063” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AD | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.067” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AE | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.071” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AF | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.075” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AG | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.079” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AH | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.083” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AJ | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.087” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 215 | Part # 211215AK | Race, A6GF1/A6MF2/6F24 Overdrive Drum To Rear Cover (.091” Thick)(3.108”OD)(2.675”ID) 2010-Up | 1 |
| 216 | Part # 211216A | Race, A6MF2/6F24 Overdrive Sun Gear To Overdrive Drum (.046” Thick)(1.450”OD)(.932”ID) 2010-Up | — |
| 216 | Part # 211216C | Race, A6GF1 Overdrive Sun Gear To Overdrive Drum (.046” Thick)(1.352”OD)(.838”ID) 2012-Up | — |
| 217 | Part # 211217A | Bearing W/Race, A6MF2/6F24 Overdrive Sun Gear To Overdrive Drum (.175” Thick)(1.445”OD) (.850”ID) 2010-Up | — |
| 217 | Part # 211217C | Bearing W/Race, A6GF1 Overdrive Sun Gear To Overdrive Drum (.175”Thick)(1.365”OD) (.760”ID) 2012-Up | — |
| 218 | Part # 211218A | Caged Needle Bearing, A6MF2/6F24 Overdrive Planet (Rear)(.410” Wide)(1.818”OD)(1.652”ID) 2010-Up | — |
| 218 | Part # 211218C | Caged Needle Bearing, A6GF1 Overdrive Planet (Rear)(.372” Wide)(1.664”OD)(1.494”ID) 2012-Up | — |
| 219 | Part # 211219A | Bearing W/Races, A6MF2/6F24 3-5/Reverse Hub (.142”Thick)(1.765”OD) 2010-Up | — |
| 219 | Part # 211219C | Bearing W/Races, A6GF1 3-5/Reverse Drum To 2-6/3-5/Reverse Hub (.142”Thick)(1.705”OD) 2012-Up | 1 |
| 220 | Part # 211220AA | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.118” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AB | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.126” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AC | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.134” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AD | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.142” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AE | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.150” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AF | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.158” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AG | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.166” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AH | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.174” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 220 | Part # 211220AJ | Washer, A6GF1/A6MF2/6F24 Overdrive Planet To Overdrive Drum (.182” Thick)(2.350”OD) (3 Tab, Plastic) 2010-Up | 1 |
| 221 | Part # 211221A | Washer, A6GF1/A6MF2/6F24 2-6/3-5/Reverse Hub To Underdrive Hub (Black Plastic) (.087” Thick)(2.577”OD)(2.135”ID)(2 Tab)… | 1 |
| 223 | Part # 211223A | Caged Needle Bearing, A6GF1/A6MF2/6F24 Rear Cover (Inner)(.585” Wide)(.865”OD) (.630”ID) 2010-Up | 1 |
| 246 | Part # 211246A | Race, A6MF2/6F24 Output Sun Gear To Overdrive Sun Gear (.121” Thick)(1.722”OD) (1.220”ID) 2010-Up | — |
| 246 | Part # 211246C | Race, A6GF1 Output Sun Gear To Overdrive Sun Gear (.094” Thick)(1.680”OD)(1.140”ID) 2012-Up | — |
| 247 | Part # 211247A | Bearing W/Race, A6MF2/6F24 Output Sun Gear To Overdrive Sun Gear (.118”Thick) (1.860”OD)(1.300”ID) 2010-Up | — |
| 247 | Part # 211247C | Bearing W/Race, A6GF1 Output Sun Gear To Overdrive Sun Gear (.145”Thick)(1.815”OD) (1.210”ID) 2012-Up | 1 |
| 248 | Part # 211248A | Washer, A6MF2/6F24 Output Planet To Overdrive Planet (.213” Thick)(2.515”OD)(1.960”ID) (2 Tab) 2010-Up | — |
| 248 | Part # 211248C | Washer, A6GF1 Output Planet To Overdrive Planet (.213” Thick)(2.445”OD)(1.890”ID)(2 Tab) 2012-Up | 1 |
| 251 | Part # 211251C | Bearing W/Race, A6GF1 Drive Transfer Gear To Output Planet (.110” Thick)(2.824”OD) (2.320”ID)(60 Needles) 2012-Up | — |
| 252 | Part # 211252A | Race, A6MF2/6F24 Drive Transfer Gear To Output Planet (.086” Thick)(2.930”OD)(2.360”ID) 2010-Up | — |
| 252 | Part # 211252C | Race, A6GF1 Drive Transfer Gear To Output Planet (.086” Thick)(2.845”OD)(2.275”ID) 2012-Up | — |
| 254 | Part # 211254A | Bearing W/Race, A6MF2/6F24 Drive Transfer Gear To Output Planet (.110” Thick)(2.905”OD) (2.420”ID)(62 Needles)… | — |
| 254 | Part # 211254C | Bearing W/Race, A6GF1 Drive Transfer Gear To Output Planet (.110” Thick)(2.825”OD) (2.350”ID)(20 Needles) 2012-Up | 1 |
| 273 | Part # 211273A | Cup Race, A6MF2 Pinion To Bell Housing (2.953”OD)(2.495”ID)(Cast # M0606.1115.24) 2010-Up | 1 |
| 273 | Part # 211273C | Cup Race, A6GF1 Pinion To Bell Housing (2.795”OD)(2.330”ID)(Cast # F-667744.THT.DY-W61C) 2012-Up | 1 |
| 274 | Part # 211274A | Cone Bearing, A6MF2 Pinion To Bell Housing (23 Rollers)(1.770”ID)(Cast # E1031-0611-10) 2010-Up | 1 |
| 274 | Part # 211274C | Cone Bearing, A6GF1 Pinion To Bell Housing (22 Rollers)(1.615”ID)(Cast # F-567744 TRI DYW6) 2012-Up | 1 |
| 274 | Part # 211274D | Cone Bearing, 6F24 Pinion To Bell Housing (20 Rollers)(1.770”ID)(Cast # F577011.01.TR1) 2013-Up | 1 |
| 277 | Part # 211277AA | Shim, A6MF2 Pinion To Bell Housing (Selective)(2.925”OD)(2.575”ID) 2010-Up | — |
| 277 | Part # 211277CA | Shim, A6GF1 Pinion To Bell Housing (Selective)(2.770”OD)(2.400”ID) 2012-Up | — |
| 277 | Part # 211277DA | Shim, 6F24 Pinion To Bell Housing (Selective)(2.930”OD)(2.575”ID) 2013-Up | — |
| 279 | Part # 211279A | Roller Bearing, A6MF2/6F24 Drive Transfer Gear To Support (40 Rollers)(2.595”ID) 2010-Up | — |
| 279 | Part # 211279C | Roller Bearing, A6GF1 Drive Transfer Gear To Support (43 Rollers)(2.480”ID) 2012-Up | — |
| 280 | Part # 211280A | Cup Race, A6MF2 Pinion To Case (.668” Thick)(2.560”OD)(Cast # E1104-0119-08) 2010-Up | 1 |
| 280 | Part # 211280C | Cup Race, A6GF1 Pinion To Case (.668” Thick)(2.440”OD)(Cast # HR 33007J) 2012-Up | 1 |
| 280 | Part # 211280D | Cup Race, 6F24 Pinion To Case (.668” Thick)(2.560”OD)(Cast # F577102.01.TR1) 2013-Up | 1 |
| 281 | Part # 211281A | Cone Bearing, A6MF2 Pinion To Case (22 Rollers)(1.375”ID)(Cast # TR356521HL) 2010-Up | 1 |
| 281 | Part # 211281C | Cone Bearing, A6GF1 Pinion To Case (20 Rollers)(1.300”ID)(Cast # R33-8) 2012-Up | 1 |
| 281 | Part # 211281D | Cone Bearing, 6F24 Pinion To Case (20 Rollers)(1.375”ID)(Cast # H0602-0652-28) 2013-Up | 1 |
| 287 | Part # 211287A | Lock Washer, A6MF2/6F24 Underdrive Transfer Gear Nut (28 Outer Tans, 2 Inner Tabs) (3.420”OD)(2.550”ID) 2010-Up | — |
| 287 | Part # 211287C | Lock Washer, A6GF1 Underdrive Transfer Gear Nut (28 Outer Tabs, 2 Inner Tabs)(3.205”OD) (2.485”ID) 2012-Up | 1 |
| 288 | Part # 211288A | Replaced by 211291A | — |
| 288 | Part # 211288C | Replaced by 211291C | — |
| 289 | Part # 211289A | Replaced by 211292A | — |
| 289 | Part # 211289C | Replaced by 211292C | — |
| 289 | Part # 211289D | Replaced by 211292D | — |
| 290 | Part # 211290AA | Shim, A6MF2 Differential To Bell Housing (Selective)(3.322”OD)(1.885”ID) 2010-Up | — |
| 290 | Part # 211290CA | Shim, A6GF1/6F24 Differential TO Bell Housing (Selective)(3.105”OD)(1.770”ID) 2012-Up | — |
| 291 | Part # 211291A | Cup Race, A6MF2 Differential To Bell Housing (3.350”OD)(Cast # Korea 806149) 2010-Up..........................… | 1 |
| 291 | Part # 211291C | Cup Race, A6GF1/6F24 Differential To Bell Housing (3.150”OD)(Cast # NSX R50.628D) 2012-Up… | 1 |
| 292 | Part # 211292A | Cone Bearing, A6MF2 Differential To Bell Housing (21 Rollers)(.818” Thick)(2.165”ID) 2010-Up… | — |
| 292 | Part # 211292C | Cup Race, A6GF1 Differential To Bell Housing (22 Rollers)(.770” Thick)(1.968”ID) 2012-Up ........................… | — |
| 292 | Part # 211292D | Cup Race, 6F24 Differential To Bell Housing (21 Rollers)(.770” Thick)(1.968”ID) 2013-Up ...........................… | — |
| 294 | Part # 211294A | Caged Needle Bearing, A6GF1/A6MF2/6F24 Manual Shaft To Case (.470” Wide)(.788”OD) 2010-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 510 not on diagram | Part # 211510A | Pump Body W/Gears, A6MF2/6F24 (Cast Iron)(6 5/16”OD)(9 Teeth Inner & 10 Teeth Outer Gear) (B Casting)(Bushing Type)… | — |
| 510 not on diagram | Part # 211510AA | Pump Body W/Gears, A6MF2 (9 Teeth Inner & 10 Teeth Outer Gear) (Needle Bearing Type) (BA Casting) 2012-Up | — |
| 510 not on diagram | Part # 211510B | Pump Body W/Gears, A6LF1/A6LF2 /A6LF3 (Cast Iron)(6 1/2”OD) (9 Teeth Inner Gear & 10 Teeth Outer Gear)(.470”Thick… | — |
| 510 not on diagram | Part # 211510C | Pump Body W/Gears, A6GF1 (Cast Iron)(6 1/16”OD) (9 Teeth Inner Gear & 10 Teeth Outer Gear) (Bushing Type) 2010-Up | — |
| 520 | Part # 211520A | Stator, A6MF2/6F24 (6 3/4”OD 2-6 Clutch Piston)(2.220”OD Ring Tower) 2010-Up | — |
| 520 | Part # 211520C | Stator, A6GF1 (6 1/2”OD 2-6 Clutch Piston)(2.070”OD Ring Tower) 2012-Up | — |
| 530 | Part # 211530A | Pump Gear Set, A6GF1/A6MF2/6F24 (.445” Thick)(3.533”OD)(9 Teeth Inner & 10 Teeth Outer Gear) 2010-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 211100A | Friction, A6GF1/A6MF2/6F24 Overdrive Clutch (.068”)(36 Teeth)(6.015”OD) 2010-Up (A6GF1 Takes 4)(A6MF2/6F24 Takes 5) | — |
| 102 | Part # 211102A | Friction, A6MF2/6F24 Underdrive Clutch (.069”)(36 Teeth)(6 9/16”OD) 2010-Up | — |
| 102 | Part # 211102C | Friction, A6GF1 Underdrive Clutch (.072”)(36 Teeth)(6 5/16”OD) 2012-Up | — |
| 104 | Part # 211104A | Friction, A6MF2/6F24 2-6 Clutch (.073”)(36 Teeth)(7”OD) 2010-Up | — |
| 104 | Part # 211104C | Friction, A6GF1 2-6 Clutch (.073”)(36 Teeth)(6 5/8”OD) 2012-Up | 1 |
| 106 | Part # 211106A | Friction, A6MF2 3-5/Reverse Clutch (.091”)(30 Teeth)(5.265”OD)(1 Sided Friction) 2010-Up | — |
| 106 | Part # 211106B | Friction, A6LF1/2/3 3-5/Rev Clu (One Sided)(Internal Teeth) 2009-13 | — |
| 106 | Part # 211106C | Friction, A6GF1 3-5/Reverse Clutch (.082”)(30 Teeth)(4.955”OD)(1 Sided Friction) 2012-Up | — |
| 106 | Part # 211106D | Friction, 6F24 3-5/Reverse Clutch (.082”)(30 Teeth)(5.265”OD)(1 Sided Friction) 2013-Up | — |
| 114 | Part # 211114A | Friction, A96MF2/6F24 Low/Reverse Clutch (.068”)(36 Teeth)(6 15/16”OD) 2010-Up | — |
| 114 | Part # 211114C | Friction, A6GF1 Low/Reverse Clutch (.072”)(36 Teeth)(6 5/8”OD) 2012-Up | — |
| 119 not on diagram | Part # 211119A | Friction Module, A6MF1/6F24 (Hyundai/Kia) 2009-Up | 1 |
| 119 not on diagram | Part # 211119B | Friction Module, A6LF2 2009-Up | — |
| 119 not on diagram | Part # 211119C | Friction Module, A6GF1 2009-Up | — |
| 120 | Part # 211120A | Steel, A6GF1/A6MF2/6F24 Overdrive Clutch (.092”)(27 Teeth)(5.285”ID) 2010-Up (This Is The Bottom Steel) | — |
| 120 | Part # 211120AA | Steel, A6MF2/6F24 Overdrive Clutch (27 Teeth)(5.285”ID) 2010-Up (All Except The Bottom Steel) | — |
| 120 | Part # 211120C | Steel, A6GF1 Overdrive Clutch (.107”)(5.285”ID) 2012-Up (All Except The Bottom Steel) | — |
| 122 | Part # 211122A | Steel, A6MF2 Underdrive Clutch (.079”)(7 Teeth)(5.825”ID) 2010-Up | — |
| 122 | Part # 211122C | Steel, A6GF1 Underdrive Clutch (.071)(7 Teeth)(5.560”ID) 2012-Up | — |
| 122 | Part # 211122D | Steel, 6F24 Underdrive Clutch (.071”)(5.825”ID) 2013-Up | — |
| 124 | Part # 211124A | Steel, A6MF2 2-6 Clutch (.156”)(7 Teeth)(6.220”ID) 2010-Up | — |
| 124 | Part # 211124C | Steel, A6GF1 2-6 Clutch (.083”)(7 Teeth)(5.915”OD) 2012-Up | — |
| 124 | Part # 211124D | Replaced by 211145AB | — |
| 126 | Part # 211126A | Friction, A6MF2 3-5/Reverse Clutch (.120”)(27 Teeth)(4.575”ID)(1 Sided Friction) 2010-Up | — |
| 126 | Part # 211126B | Friction, A6LF1/2/3 3-5/Rev Clu (One Sided)(External Teeth)(.078”Thick) 2009-13 | — |
| 126 | Part # 211126BA | Friction, A6LF1/2/3 3-5/Rev Clu (One Sided)(External Teeth) (.098”Thick) 2009-13 | — |
| 126 | Part # 211126C | Friction, A6GF1 3-5/Reverse Clutch (.099”)(27 Teeth)(4.370”ID)(1 Sided Friction) 2012-Up | — |
| 126 | Part # 211126D | Friction, 6F24 3-5/Reverse Clutch (.099”)(27 Teeth)(4.575”ID)(1 Sided Friction) 2013-Up | — |
| 134 | Part # 211134A | Steel, A6MF2 Low/Reverse Clutch (.048”)(15 Teeth)(6 1/4”ID) 2010-Up | — |
| 134 | Part # 211134C | Steel, A6GF1 Low/Reverse Clutch (.040”)(15 Teeth)(5.973”ID) 2012-Up | — |
| 134 | Part # 211134D | Steel, 6F24 Low/Reverse Clutch (.040”)(15 Teeth)(6 1/4”ID) 2013-Up | — |
| 139 not on diagram | Part # 211139A | Steel Module, A6MF1 2009-Up | 1 |
| 139 not on diagram | Part # 211139B | Steel Module, A6LF2 2009-Up | — |
| 139 not on diagram | Part # 211139C | Steel Module, A6GF1/A6GF2 2009-Up | — |
| 140 | Part # 211140A | Pressure Plate, A6MF2/6F24 Overdrive Clutch (.115”)(27 Teeth)(5.275”ID) 2010-Up | — |
| 140 | Part # 211140C | Pressure Plate, A6GF1 Overdrive Clutch (.093”)(27 Teeth)(5.275”ID) 2012-Up | — |
| 142 | Part # 211142A | Pressure Plate, A6MF2/6F24 Underdrive Clutch (.099”)(7 Teeth)(Stepped)(5.835”ID) 2010-Up | — |
| 142 | Part # 211142C | Pressure Plate, A6GF1 Underdrive Clutch (.088”)(7 Teeth)(Stepped)(5.565”ID) 2012-Up | — |
| 144 | Part # 211144A | Pressure Plate, A6MF2/6F24 2-6 Clutch (.098”)(7 Teeth)(Stepped) 2010-Up | — |
| 144 | Part # 211144C | Pressure Plate, A6GF1 2-6 Clutch (.099”)(7 Teeth)(Stepped)(5.915”ID) 2012-Up | — |
| 145 | Part # 211145AA | Apply Plate, A6MF2/6F24 2-6 Clutch (.075”)(7 Teeth)(6.220”ID) 2010-Up | 1 |
| 145 | Part # 211145AB | Apply Plate, A6MF2/6F24 2-6 Clutch (.083”)(7 Teeth)(6.220”ID) 2010-Up (Also Fits 6F24 2 -6 Clutch #124 2013-Up, Takes… | 1 |
| 145 | Part # 211145AC | Apply Plate, A6MF2/6F24 2-6 Clutch (.090”)(7 Teeth)(6.220”ID) 2010-Up | 1 |
| 145 | Part # 211145AD | Apply Plate, A6MF2/6F24 2-6 Clutch (.098”)(7 Teeth)(6.220”ID) 2010-Up | 1 |
| 145 | Part # 211145AE | Apply Plate, A6MF2/6F24 2-6 Clutch (.106”)(7 Teeth)(6.220”ID) 2010-Up | 1 |
| 145 | Part # 211145AF | Apply Plate, A6MF2/6F24 2-6 Clutch (.114”)(7 Teeth)(6.220”ID) 2010-Up | 1 |
| 145 | Part # 211145AG | Apply Plate, A6MF2/6F24 2-6 Clutch (.122”)(7 Teeth)(6.220”ID) 2010-Up | 1 |
| 145 | Part # 211145CA | Apply Plate, A6GF1 2-6 Clutch (.075”)(7 Teeth)(5.915”ID) 2012-Up | 1 |
| 145 | Part # 211145CB | Apply Plate, A6GF1 2-6 Clutch (.083”)(7 Teeth)(5.915”ID) 2012-Up | 1 |
| 145 | Part # 211145CC | Apply Plate, A6GF1 2-6 Clutch (.090”)(7 Teeth)(5.915”ID) 2012-Up | 1 |
| 145 | Part # 211145CD | Apply Plate, A6GF1 2-6 Clutch (.098”)(7 Teeth)(5.915”ID) 2012-Up | 1 |
| 145 | Part # 211145CE | Apply Plate, A6GF1 2-6 Clutch (.106”)(7 Teeth)(5.915”ID) 2012-Up | 1 |
| 145 | Part # 211145CF | Apply Plate, A6GF1 2-6 Clutch (.114”)(7 Teeth)(5.915”ID) 2012-Up | 1 |
| 145 | Part # 211145CG | Apply Plate, A6GF1 2-6 Clutch (.122”)(7 Teeth)(5.915”ID) 2012-Up | 1 |
| 146 | Part # 211146C | Pressure Plate, A6GF1 3-5/Reverse Clutch (.095”)(27 Teeth)(Stepped)(4.380”ID) 2012-Up | — |
| 154 | Part # 211154A | Pressure Plate, A6MF2 Low/Reverse Clutch (.175”)(15 Teeth)(6 1/4”ID) 2010-Up | — |
| 154 | Part # 211154C | Pressure Plate, A6GF1 Low/Reverse Clutch (.160”)(15 Teeth)(6”ID) 2012-Up | — |
| 154 | Part # 211154D | Pressure Plate, 6F24 Low/Reverse Clutch (.158”)(15 Teeth)(6 1/4”ID) 2013-Up | — |
| 155 | Part # 211155AA | Apply Plate, A6MF2 Low/Reverse Clutch (Selective Thickness)(7 1/8”OD) 2012-Up | — |
| 155 | Part # 211155CA | Apply Plate, A6GF1 Low/Reverse Clutch (.114”)(15 Teeth)(5.972”ID) 2012-Up | 1 |
| 155 | Part # 211155CB | Apply Plate, A6GF1 Low/Reverse Clutch (.122”)(15 Teeth)(5.972”ID) 2012-Up | 1 |
| 155 | Part # 211155CC | Apply Plate, A6GF1 Low/Reverse Clutch (.130”)(15 Teeth)(5.972”ID) 2012-Up | 1 |
| 155 | Part # 211155CD | Apply Plate, A6GF1 Low/Reverse Clutch (.138”)(15 Teeth)(5.972”ID) 2012-Up | 1 |
| 155 | Part # 211155CE | Apply Plate, A6GF1 Low/Reverse Clutch (.146”)(15 Teeth)(5.972”ID) 2012-Up | 1 |
| 155 | Part # 211155CF | Apply Plate, A6GF1 Low/Reverse Clutch (.154”)(15 Teeth)(5.972”ID) 2012-Up | 1 |
| 155 | Part # 211155DA | Apply Plate, 6F24 Low/Reverse Clutch (Selective)(15 Teeth)(6 1/4”ID) 2013-Up | — |
| 852 | Part # 211852A | Cushion, A6MF2/6F24 2-6 Clutch (.065”)(7 1/16”OD)(6 1/4”ID)(Wavy) 2010-Up | — |
| 852 | Part # 211852C | Cushion, A6GF1 2-6 Clutch (.065”)(7 Teeth)(5 15/16”ID)(Wavy) 2013-Up | — |
| 857 | Part # 211857A | Cushion, A6GF1/A6MF2 Low/Reverse Clutch (.063”)(No Teeth)(6 5/16”ID)(Wavy) 2010-Up | 1 |
| 857 | Part # 211857D | Cushion, 6F24 Low/Reverse Clutch (.065”)(15 Teeth)(5 15/16”ID)(Wavy) 2013-Up | — |
| 960 | Part # 211960A | Piston, A6MF2/6F24 Overdrive Clutch (Aluminum)(22 Spring Pockets)(.790” Thick)(5.905”OD) 2010-Up | — |
| 960 | Part # 211960C | Piston, A6GF1 Overdrive Clutch (Aluminum)(No Spring Pockets)(.790” Thick)(5.905”OD) 2012-Up | 1 |
| 961 | Part # 211961A | Piston, A6MF2/6F24 Underdrive Clutch (Steel)(.427” Thick)(6 7/16”OD) 2010-Up | — |
| 961 | Part # 211961C | Piston, A6GF1 Underdrive Clutch (Steel)(.410” Thick)(6 1/8”OD) 2012-Up | 1 |
| 962 | Part # 211962A | Piston, A6MF2/6F24 2-6 Clutch (.655” Thick)(6 3/4”OD)(Aluminum) 2010-Up | — |
| 962 | Part # 211962C | Piston, A6GF1 2-6 Clutch (.655” Thick)(6 1/2”OD)(Aluminum) 2012-Up | 1 |
| 965 | Part # 211965A | Piston/Housing, A6MF2/6F24 3-5/Reverse Clutch (Steel)(.975” Thick)(5.120”OD) 2010-Up | — |
| 965 | Part # 211965C | Piston/Housing, A6GF1 3-5/Reverse Clutch (Steel)(1.005” Thick)(4.880”OD) 2012-Up | 1 |
| 967 | Part # 211967A | Piston, A6MF2/6F24 Low/Reverse Clutch (Aluminum)(1.140” Thick)(7”OD) 2010-Up | — |
| 967 | Part # 211967C | Piston, A6GF1 Low/Reverse Clutch (Aluminum)(1.140” Thick)(6 11/16”OD) 2012-Up | 1 |
| 970 | Part # 211970A | Spring/Retainer, A6MF2/6F24 Overdrive Clutch Return (22 Springs)(.765” Thick)(3.695”OD) 2010-Up | — |
| 971 | Part # 211971A | Spring, A6MF2/6F24 Underdrive Clutch Return (.760” Thick)(4.860”OD) 2010-Up | — |
| 971 | Part # 211971C | Spring, A6GF1 Underdrive Clutch Return (.712” Thick)(4.460”OD) 2012-Up | 1 |
| 972 | Part # 211972A | Spring, A6MF2/6F24 2-6 Clutch Return (Wavy)(.036” Thick)(6 9/16”OD) 2010-Up | — |
| 972 | Part # 211972C | Spring, A6GF1 2-6 Clutch Return (Wavy)(.035” Thick)(6 1/4”OD) 2012-Up | 1 |
| 975 | Part # 211975A | Spring, A69MF2/6F24 2-5/Reverse Clutch Return (.045” Thick)(3.915”OD) 2010-Up | — |
| 975 | Part # 211975C | Spring, A6GF1 3-5/Reverse Clutch Return (.045” Thick)(3.770”OD) 2012-Up | 1 |
| 977 | Part # 211977A | Spring/Retainer, A6MF2/6F24 Low/Reverse Clutch Return (.980” Thick)(7”OD) 2010-Up | — |
| 977 | Part # 211977C | Spring/Retainer, A6GF1 Low/Reverse Clutch Return (.980” Thick)(6 3/4”OD) 2012-Up | 1 |
| 980 | Part # 211980A | Piston/Retainer, A6GF1/A6MF2/6F24 Overdrive (Bonded)(.205” Thick)(4.650”OD) 2010-Up | — |
| 985 | Part # 211985A | Piston/Retainer, A6MF2/6F24 3-5/Reverse Clutch (Bonded)(.240” Thick)(3.980”OD) 2009-Up | — |
| 985 | Part # 211985C | Piston/Retainer, A6GF1 3-5/Reverse Clutch (Bonded)(.230” Thick)(3.825”OD) 2012-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 550 | Part # 211550A | Drum, A6MF2/6F24 Overdrive Clutch Retainer (2.005”ID Ring Bore)(25 Teeth Sun Gear, 1.610”OD) 2010-Up | — |
| 550 | Part # 211550C | Drum, A6GF1 Overdrive Clutch Retainer (2.005”ID Ring Bore)(25 Teeth Sun Gear, 1.465”OD) 2012-Up | 1 |
| 551 | Part # 211551A | Clutch Housing, A6MF2/6F24 Underdrive Clutch Retainer (7” OD, Steel) 2010-Up | — |
| 551 | Part # 211551C | Clutch Housing, A6GF1 Underdrive Clutch Retainer (6 3/4”OD, Steel) 2012-Up | 1 |
| 555 | Part # 211555A | Drum W/Shaft, A6MF2 3-5/Reverse Clutch Retainer (13 3/8” Long Shaft)(2.237”ID Ring Bore) (12 Oval Holes) 2010-Up | — |
| 555 | Part # 211555C | Drum W/Sahft, A6GF1 3-5/Reverse Clutch Retainer (12 7/8” Long Shaft)(2.080”ID Ring Bore) (36 Oval Holes) 2012-Up | 1 |
| 555 | Part # 211555D | Drum W/Shaft, 6F24 3-5/Reverse Clutch Retainer (12 7/8” Long Shaft)(2.237”ID Ring Bore) (12 Oval Holes) 2013-Up | — |
| 570 | Part # 211570A | Hub, A6MF2/6F24 Overdrive/Low/Reverse Clutch (2.960” Tall) 2010-Up | — |
| 570 | Part # 211570C | Hub, A6GF1 Overdrive/Low/Reverse Clutch (2.770” Tall) 2012-Up | 1 |
| 571 | Part # 211571A | Hub, A6MF2/6F24 Underdrive Clutch (5.225”OD)(36 Square Holes) 2010-Up | — |
| 571 | Part # 211571C | Hub, A6GF1 Underdrive Clutch (5.003”OD)(36 Round Holes) 2012-Up | 1 |
| 575 | Part # 211575A | Hub, A6MF2 2-6/3-5/Reverse Clutch (6.090”OD)(1.740”Thick Through The Center)(28 Inner Splines) 2010-Up | — |
| 575 | Part # 211575C | Hub, A6GF1 2-6/3-5/Reverse Clutch (5.775”OD)(1.550” Thick Through The Center)(26 Inner Splines) 2012-Up | 1 |
| 575 | Part # 211575D | Hub, 6F24 2-6/3-5/Reverse Clutch (6.090”OD)(1.540” Thick Through The Center)(28 Inner Splines) 2013-Up | — |
| 580 | Part # 211580A | Planet, A6MF2/6F24 Overdrive (9 Gear)(4.624”OD Of Housing) 2010-Up | — |
| 580 | Part # 211580C | Planet, A6GF1 Overdrive (9 Gear)(4.310”OD OF Housing) 2012-Up | 1 |
| 584 | Part # 211584A | Planet, A6MF2/6F24 Output (5 Gear)(Uses A 32 Teeth Sun Gear #614)(1.645”ID Of Snout) 2010-Up | — |
| 584 | Part # 211584C | Planet, A6GF1 Output (5 Gear)(Uses a 31 Teeth Sun Gear #614)(1.565”ID Of Snout) 2012-Up | 1 |
| 590 | Part # 211590A | Ring Gear, A6MF2/6F24 Overdrive Planet (77 Teeth)(1.270” Thick) 2010-Up | — |
| 590 | Part # 211590C | Ring Gear, A6GF1 Overdrive Planet (79 Teeth)(1.215” Thick) 2012-Up | 1 |
| 594 | Part # 211594A | Ring Gear, A6MF2/6F24 Output Planet (83 Teeth)(2.435”ID) 2010-Up | — |
| 594 | Part # 211594C | Ring Gear, A6GF1 Output Planet (83 Teeth)(2.350”ID) 2012-Up | 1 |
| 610 | Part # 211610C | Sun Gear, A6GF1 Overdrive Planet (25 Teeth)(1.135”OD Of Shaft)(5.170” Long) 2012-Up | 1 |
| 614 | Part # 211614A | Sun Gear, A6MF2/6F24 Output Planet (32 Teeth)(1.567”OD Of Shaft) 2010-Up | — |
| 614 | Part # 211614C | Sun Gear, A6GF1 Output Planet (31 Teeth)(1.490”OD Of Shaft) 2012-Up | 1 |
| 652 | Part # 211652C | Sprag, A6GF1 Low/Reverse With 11 Lug Outer Race (.775” Thick)(20 Elements) 2012-Up | — |
| 710 | Part # 211710A | Gear, A6MF2 Drive Transfer (47 Teeth)(2 Groove)(.840” Thick)(5.150”OD) 2010-Up | — |
| 710 | Part # 211710C | Gear, A6GF1 Drive Transfer (52 Teeth)(2 Groove)(.775” Thick)(5.140”OD) 2012-Up | 1 |
| 710 | Part # 211710D | Gear, 6F24 Drive Transfer (50 Teeth)(5 Groove)(.930” Thick)(5.385”OD) 2013-Up | — |
| 711 | Part # 211711A | Support, A6MF2/6F24 Drive Transfer Gear (Steel)(7”OD) 2010-Up | — |
| 711 | Part # 211711C | Support, A6GF1 Drive Transfer Gear (Steel)(6 3/4”OD) 2012-Up | 1 |
| 712 | Part # 211712A | Gear, A6MF2 Driven Transfer (51 Teeth)(2 Groove)(.840” Thick)(5.530”OD) 2010-Up | — |
| 712 | Part # 211712C | Gear, A6GF1 Driven Transfer (49 Teeth)(1 Groove)(.785” Thick)(4.860”OD) 2012-Up | — |
| 712 | Part # 211712D | Gear, 6F24 Driven Transfer (49 Teeth)(5 Groove)(.913” Thick)(5.285”OD) 2013-Up | — |
| 716 | Part # 211716A | Differential Housing, A6MF2 (8 Bolt)(Uses 21 Roller Bearings) 2010-Up | — |
| 716 | Part # 211716AA | Differential Housing, S6MF1 (10 Bolt)(Uses 26 Roller Bearings) 2010-Up | — |
| 716 | Part # 211716C | Differential Housing, A6GF1 (8 Bolt)(Uses 22 Roller Bearings) 2012-Up | — |
| 716 | Part # 211716D | Differential Housing, 6F24 (12 Bolt)(Uses 26 Roller Bearings) 2013-Up | — |
| 720 | Part # 211720A | Ring Gear, A6MF2 Differential (53 Teeth)(2 Groove)(8 Bolt) 2010-Up | — |
| 720 | Part # 211720C | Ring Gear, A6GF1 Differential (53 Teeth)(3 Groove)(8 Bolt) 2012-Up | 1 |
| 720 | Part # 211720D | Ring Gear, 6F24 Differential (53 Teeth)(3 Groove)(12 Bolt) 2013-Up | — |
| 730 | Part # 211730A | Pinion, A6MF2 (18 Teeth)(2 Groove)(5.640” Long)(2.787”OD) 2010-Up | — |
| 730 | Part # 211730C | Pinion, A6GF1 (17 Teeth)(4 Groove)(5.680” Long)(2.530”OD) 2012-Up | — |
| 730 | Part # 211730D | Pinion, 6F24 (18 Teeth)(3 Groove)(5.945” Long)(2.885”OD) 2013-Up | — |
| 750 | Part # 211750A | Bell Housing, A6MF2 (Starter At 2:00)(Cast # A6MF2)(2.925”OD Axle Seal)(20 Bolts To Case) 2010-Up | 1 |
| 750 | Part # 211750C | Bell Housing, A6GF1 (Starter At 2:00)(Cast # A6GF1)(2.560”OD Axle Seal)(2WD)(19 Bolts To Case) 2012-Up | 1 |
| 750 | Part # 211750D | Bell Housing, 6F24 (Starter At 10:00)(Cast # 6F24)(2.640”OD Axle Seal)(2WD)(20 Bolts To Case) 2013-Up | 1 |
| 759 | Part # 211759A | Rear Cover, A6MF2 (13 Bolt)(Cast # A6MF1) 2010-Up | 1 |
| 759 | Part # 211759C | Rear Cover, A6GF1 (13 Bolt)(Cast # A6GF1) 2012-Up | 2 |
| 759 | Part # 211759D | Rear Cover, 6F24 (13 Bolt)(Cast # 45320-P3B750 Powertech INZ1-1) 2013-Up | 1 |
| 760 | Part # 211760A | Case, A6MF2 (20 Bolts To Bell)(Cast # A6MF2) 2010-Up | 1 |
| 760 | Part # 211760D | Case, 6F24 (20 Bolts To Bell)(Cast # 6F24) 2013-Up | 1 |
| 955 | Part # 211955A | Piston Housing, A6MF2/6F24 Underdrive Clutch (Aluminum)(2 Bolt)(.972” Thick)(5.705”OD) 2010-Up | — |
| 995 | Part # 211995A | Park Pawl Assembly, A6MF2 (Cast # 3B600 On Park Pawl)(5 Pieces) 2010-Up | 1 |
| 995 | Part # 211995C | Park Pawl Assembly, A6GF1 (Cast # 26000 On Park Pawl)(5 Pieces) 2012-Up | 1 |
| 995 | Part # 211995D | Park Pawl Assembly, 6F24 (Cast # 3B650 On Park Pawl)(5 Pieces) 2013-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 698 | Part # 211698-1A | Oil Guide, A6MF2 (1 Bolt)(Sets Inside Case, Front)(Cast # 800) 2010-Up | 1 |
| 698 | Part # 211698-1C | Oil Guide, A6GF1 (1 Bolt)(Sets Inside Case, Front)(Cast # 260) 2012-Up | 2 |
| 698 | Part # 211698-1D | Oil Guide, 6F24 (1 Bolt)(Sets Inside Case, Front)(Cast # XC) 2013-Up | — |
| 698 | Part # 211698A | Oil Guide, A6MF2 (3 Bolts To Bell)(Cast # 800) 2010-Up | 1 |
| 698 | Part # 211698C | Oil Guide, A6GF1 (3 Bolts To Bell)(Cast # 260) 2012-Up | 2 |
| 698 | Part # 211698D | Oil Guide, 6F24 (3 Bolts To Bell)(Cast # 650) 2013-Up | 1 |
| 699 | Part # 211699-1A | Oil Guide, A6MF2/6F24 Overdrive Planet (Front)(Black Plastic)(3.474”OD)(3 Half Round Tabs) 2010-Up | — |
| 699 | Part # 211699-1C | Oil Guide, A6GF1 Overdrive Planet (Front)(Black Plastic)(3.235”OD)(3 Half Round Tabs) 2012-Up | 1 |
| 699 | Part # 211699-2A | Oil Guide, A6MF2/6F24 Overdrive Planet (Rear)(White Plastic)(1.778” Long)(21 Round Tabs) 2010-Up | — |
| 699 | Part # 211699A | Oil Guide, A6MF2/6F24 Output Planet (Front)(Black Plastic)(3.698”OD)(5 Round Tabs) 2010-Up | — |
| 699 | Part # 211699C | Oil Guide, A6GF1 Output Planet (Front)(Black Plastic)(3.612”OD)(5 Round Tabs) 2012-Up | 1 |
| 795 | Part # 211795A | Nut, A6MF2/6F24 Holds Drive Transfer Gear To Support # 711 (24 Notches)(3.325”OD) 2010-Up | — |
| 795 | Part # 211795C | Nut, A6GF1 Holds Drive Transfer Gear To Support # 711 (24 Notches)(3.115”OD) 2010-Up | 1 |
| 861 | Part # 211861AA | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Pressure Plate In (.067” Thick) (6 3/8”OD) 2010-Up | 1 |
| 861 | Part # 211861AB | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Pressure Plate In (.074” Thick) (6 3/8”OD) 2010-Up | 1 |
| 861 | Part # 211861AC | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Pressure Plate In (.083” Thick) (6 3/8”OD) 2010-Up | 1 |
| 861 | Part # 211861AD | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Pressure Plate In (.091” Thick) (6 3/8”OD) 2010-Up | 1 |
| 861 | Part # 211861AE | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Pressure Plate In (.098” Thick) (6 3/8”OD) 2010-Up | 1 |
| 861 | Part # 211861AF | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Pressure Plate In (.106” Thick) (6 3/8”OD) 2010-Up | 1 |
| 861 | Part # 211861AG | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Pressure Plate In (.114” Thick) (6 3/8”OD) 2010-Up | 1 |
| 862 | Part # 211862A | Snap Ring, A6GF1/A6MF2/6F24 Holds Overdrive Clutch Spring Retainer In (.060” Thick) (1.465”OD) 2010-Up | 1 |
| 864 | Part # 211864A | Snap Ring, A6MF2/6F24 Holds Underdrive Clutch Pressure Plate In (.083” Thick)(6 15/16”OD) 2010-Up | — |
| 865 | Part # 211865A | Snap Ring, A6MF2/6F24 Holds Underdrive Clutch Spring Retainer In (.058” Thick)(3.940”OD) 2010-Up | — |
| 865 | Part # 211865C | Snap Ring, A6GF1 Holds Underdrive Clutch Spring Retainer In (.059” Thick)(3.735”OD) 2012-Up | 1 |
| 867 | Part # 211867A | Snap Ring, A6MF2/6F24 Holds Overdrive Planet Ring Gear To Output Planet Ring Gear (.098” Thick)(5.750”OD) 2010-Up | — |
| 867 | Part # 211867C | Snap Ring, A6GF1 Holds Overdrive Planet Ring Gear To Output Planet Ring Gear (.098” Thick) (5.640”OD) 2012-Up | — |
| 868 | Part # 211868A | Snap Ring, A6MF2/6F24 Holds Overdrive Planet To Overdrive/Low/Reverse Hub (.095” Thick) (4.515”OD)(W/2 Bent Ends)… | — |
| 868 | Part # 211868C | Snap Ring, A6GF1 Holds Overdrive Planet To Overdrive/Low/Reverse Hub (.095” Thick) (4.240”OD)(W/2 Bent Ends) 2012-Up | — |
| 871 | Part # 211871A | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Spring Retainer In (.060” Thick)(2.570”OD) 2010-Up | — |
| 871 | Part # 211871C | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Spring Retainer In (.060” Thick)(2.450”OD) 2012-Up | 1 |
| 874 | Part # 211874A | Snap Ring, A6MF2/6F24 Holds 2-6 Clutch Spring Retainer In (.063” Thick)(6 1/8”OD) 2010-Up | — |
| 874 | Part # 211874C | Snap Ring, A6GF1 Holds 2-6 Clutch Spring Retainer In (.063” Thick)(5 7/8”OD) 2012-Up | 1 |
| 878 | Part # 211878AA | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Pressure Plate In (.062” Thick)(5.555”OD) 2010-Up | 1 |
| 878 | Part # 211878AB | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Pressure Plate In (.071” Thick)(5.555”OD) 2010-Up | 1 |
| 878 | Part # 211878AC | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Pressure Plate In (.078” Thick)(5.555”OD) 2010-Up | 1 |
| 878 | Part # 211878AD | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Pressure Plate In (.086” Thick)(5.555”OD) 2010-Up | 1 |
| 878 | Part # 211878AE | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Pressure Plate In (.094” Thick)(5.555”OD) 2010-Up | 1 |
| 878 | Part # 211878AF | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Pressure Plate In (.102” Thick)(5.555”OD) 2010-Up | 1 |
| 878 | Part # 211878AG | Snap Ring, A6MF2/6F24 Holds 3-5/Reverse Clutch Pressure Plate In (.110” Thick)(5.555”OD) 2010-Up | 1 |
| 878 | Part # 211878CA | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Pressure Plate In (.063” Thick)(5.315”OD) 2012-Up | 1 |
| 878 | Part # 211878CB | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Pressure Plate In (.071” Thick)(5.315”OD) 2012-Up | 1 |
| 878 | Part # 211878CC | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Pressure Plate In (.079” Thick)(5.315”OD) 2012-Up | 1 |
| 878 | Part # 211878CD | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Pressure Plate In (.087” Thick)(5.315”OD) 2012-Up | 1 |
| 878 | Part # 211878CE | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Pressure Plate In (.094” Thick)(5.315”OD) 2012-Up | 1 |
| 878 | Part # 211878CF | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Pressure Plate In (.102” Thick)(5.315”OD) 2012-Up | 1 |
| 878 | Part # 211878CG | Snap Ring, A6GF1 Holds 3-5/Reverse Clutch Pressure Plate In (.110” Thick)(5.315”OD) 2012-Up | 1 |
| 884 | Part # 211884A | Snap Ring, A6MF2/6F24 Holds Low/Reverse Sprag To Case (.098” Thick)(7 3/8”OD) 2010-Up | — |
| 884 | Part # 211884C | Snap Ring, A6GF1 Holds Low/Reverse Sprag To Case (.057” Thick)(7 3/8”OD) 2012-Up | — |
| 885 | Part # 211885A | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Pressure Plate In (.099” Thick)(7 1/2”OD) 2010-Up | — |
| 885 | Part # 211885C | Snap Ring, A6GF1 Holds Low/Reverse Clutch Pressure Plate In (.099” Thick)(7 5/16”OD) 2012-Up | 1 |
| 893 | Part # 211893AA | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Spring Retainer In (.067” Thick)(7 3/8”OD) 2010-Up | — |
| 893 | Part # 211893AB | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Spring Retainer In (.075” Thick)(7 3/8”OD) 2010-Up | — |
| 893 | Part # 211893AC | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Spring Retainer In (.083” Thick)(7 3/8”OD) 2010-Up | — |
| 893 | Part # 211893AD | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Spring Retainer In (.091” Thick)(7 3/8”OD) 2010-Up | — |
| 893 | Part # 211893AE | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Spring Retainer In (.098” Thick)(7 3/8”OD) 2010-Up | — |
| 893 | Part # 211893AF | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Spring Retainer In (.106” Thick)(7 3/8”OD) 2010-Up | — |
| 893 | Part # 211893AG | Snap Ring, A6MF2/6F24 Holds Low/Reverse Clutch Spring Retainer In (.114” Thick)(7 3/8”OD) 2010-Up | — |
| 893 | Part # 211893CA | Snap Ring, A6GF1 Holds Low/Reverse Clutch Spring Retainer In (.067” Thick)(7 1/8”OD) 2012-Up | 1 |
| 893 | Part # 211893CB | Snap Ring, A6GF1 Holds Low/Reverse Clutch Spring Retainer In (.075” Thick)(7 1/8”OD) 2012-Up | 1 |
| 893 | Part # 211893CC | Snap Ring, A6GF1 Holds Low/Reverse Clutch Spring Retainer In (.083” Thick)(7 1/8”OD) 2012-Up | 1 |
| 893 | Part # 211893CD | Snap Ring, A6GF1 Holds Low/Reverse Clutch Spring Retainer In (.090” Thick)(7 1/8”OD) 2012-Up | 1 |
| 893 | Part # 211893CE | Snap Ring, A6GF1 Holds Low/Reverse Clutch Spring Retainer In (.098” Thick)(7 1/8”OD) 2012-Up | 1 |
| 893 | Part # 211893CF | Snap Ring, A6GF1 Holds Low/Reverse Clutch Spring Retainer In (.106” Thick)(7 1/8”OD) 2012-Up | 1 |
| 893 | Part # 211893CG | Snap Ring, A6GF1 Holds Low/Reverse Clutch Spring Retainer In (.114” Thick)(7 1/8”OD) 2012-Up | 1 |
| 982 | Part # 211982A | Retainer, A6MF2/6F24 2-6 Clutch Spring (.062” Thick)(6 9/16”OD) 2010-Up | — |
| 982 | Part # 211982C | Retainer, A6GF1 2-6 Clutch Spring (.062” Thick)(6 1/4”OD) 2012-Up | 1 |
| 992 | Part # 211992A | Manual Lever, A6MF2 (With Slotted End)(Cast # 600) 2010-Up | 1 |
| 992 | Part # 211992C | Manual Lever, A6GF1 (With Slotted End)(Cast # 260) 2012-Up | 2 |
| 992 | Part # 211992D | Manual Lever, 6F24 (With Studded End)(No Cast #) 2013-Up | — |
| 994 | Part # 211994A | Park Pawl Actuator, A6GF1/A6MF2/6F24 (8” Long) 2010-Up | 1 |
| 999 | Part # 211999A | Oil Tube, A6MF2 (1 Bolt To Bell)(Cast # 80) 2010-Up | — |
| 999 | Part # 211999C | Oil Tube, A6GF1 (1 Bolt To Bell)(Cast # 26) 2012-Up | 1 |
| 999 | Part # 211999D | Oil Tube, 6F24 (1 Bolt To Bell)(Cast # 65) 2013-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.