JF009E / RE0F08A / RE0F08B parts diagram
Same diagram:
RE0F08A, RE0F08B
Transmission page:
Positions:
153 total, 133 on the diagram
Parts:
205 total, 12 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 243002AF | Overhaul Kit, RE0F08A/F08B (JF009E) 2002-Up | — |
| 004 not on diagram | Part # 243004AF | Master L/Steels Kit, RE0F08A (JF009E) 2002-Up | — |
| 175 not on diagram | Part # 243175A | Ring Kit, RE0F08A/F08B (JF009E) 2002-Up | — |
| 564 not on diagram | Part # 243564A | Piston Kit, RE0F08B(JF009E) Forward Clutch (Contains; # 964, 974, 984, & 877) 2009-Up | — |
| 566 not on diagram | Part # 243566A | Piston Kit, RE0F08B(JF009E) Reverse Clutch (Contains: # 893, 986, 976, 976-1 & 966) 2009-Up | — |
| 776 | Part # 243776AK | Bolt Set, RE0F08A/F08B (JF009E) Bell Housing To Case (20 Pieces) (12mm Hex X 1.705”Long) 2007-Up | — |
| 777 | Part # 243777AK | Bolt Set, RE0F08A/F08B (JF009E) Pump To Case (9 Pieces)(12mm Hex X 1.750”Long) 2007-Up | — |
| 778 | Part # 243778AK | Bolt Set, RE0F08A/F08B (JF009E) Pump Stator To Body (6mm Allen X .950”Long)(8 Pieces) 2007-Up | — |
| 779 not on diagram | Part # 243779AK | Bolt Set, RE0F08A/F08B (JF009E) Pan To Case (Bottom)(10mm Hex x .880”Long) 2007-Up | — |
| 781 | Part # 243781AK | Bolt Set, RE0F08A/F08B (JF009E) Rear Cover (14 Pieces)(12mm Hex x 1.795”Long) 2007-Up | — |
| 783 | Part # 243783AK | Bolt Set, RE0F08A/F08B (JF009E) Rear Cover To Retainer For Secondary Pulley (12mm Hex x 1.175”Long)(3 Pieces) 2007-Up | — |
| 786 | Part # 243786AK | Bolt Set, RE0F08A/F08B (JF009E) Ring Gear To Differential Housing (8 Pieces) (15mm Head x 1.120 Left Hand Thread)… | — |
| 791 | Part # 243791AK | Bolt Set, RE0F08B (JF009E) Valve Body To Case (Four 10mm Hex x 1.385”Long) (Two 10mm Hex x 2.295”Long) 2009-Up | — |
| 791 | Part # 243791BK | Bolt Set, RE0F08A(JF009E) Valve Body To Case (2 10mm Hex X 2.295” Long) (3 10mm Hex X 1.385”Long) 2007-Up… | — |
| 793 | Part # 243793AK | Bolt Set, RE0F08A/F08B (JF009E) Filter To Valve Body (15 Pieces) (14-10mm Hex x 2.910”Long)(1-10mm Hex x 1.930”Long)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 243421A | Solenoid, RE0F08B (JF009E) Pressure Control A (2-Blade Rectangle Connector)(2 O-Ring Snout)(09716 2 M On Top With Hole)… | — |
| 421 | Part # 243421B | Solenoid, RE0F08A(JF009E) Pressure Control A (2 Blade Retangle Connector)(7904 On Top) (2 O-Rings On Brown Snout)… | — |
| 425 | Part # 243425A | Solenoid, RE0F08B (JF009E) TCC Control (2 Blade Rectangle Connector)(09716 3 On Top No Hole)(2 O-Ring On Snout) 2009-Up | — |
| 425 | Part # 243425B | Solenoid, RE0F08A(JF009E) TCC Control (2 Blade Rectangle Connector)(07X17-3 On Top) (2 O-Ring On Black Snout) 2007-Up | — |
| 430 | Part # 243430A | Solenoid, RE0F08B (JF009E) TCC Select (2 Blade Rectangle Connector)(9918 On Top W/ Hole) (2 O-Ring Brown Snout) 2009-Up | — |
| 430 | Part # 243430B | Solenoid, RE0F08A(JF009E) TCC Select (2 Black Rectangle Connector)(07X17-3 On Top) (2 O-Rings On Black Snout) 2007-Up | — |
| 435 | Part # 243435A | Solenoid, RE0F08B (JF009E) Pressure Control B (Same As Pressure Control A) 2009-Up | — |
| 435 | Part # 243435B | Solenoid, RE0F08A(JF009E) Pressure Control B (2 Blade Rectangle Conn.)(07X17-3 On Top) (2 O-Ring On Black Snout)… | — |
| 705 | Part # 205705-1A | Steel Ball, RE0F08A/F08B(JF009E) Primary Pulley & Secondary Pulley) | — |
| 740 | Part # 243740A | Valve Body, RE0F08B (JF009E) (4 Solenoids)(1 Pressure Switch) (Stepper Motor)(1XA02 & 1XC On Filter Side) 2009-Up | — |
| 740 | Part # 243740B | Valve Body, RE0F08A(JF009E) (4 Solenoids)(1 Pressure Switch W/ Stepper Motor)(1XA02 Upper Half)(FYO On Filter Side)… | — |
| 741 | Part # 243741-1A | Manual Valve, RE0F08B (JF009E) For Valve Body (Aluminum)(3.975”Long) (.470”OD) (3 Lands) 2009-Up | — |
| 741 | Part # 243741-1B | Manual Valve, RE0F08A(JF009E) For Valve Body (4.320”Long)(.470”OD) (.240”Between Lands)(1/2 Round With .160”hole)… | — |
| 991 | Part # 243991-3A | Rooster Comb, RE0F08A/F08B (JF009E) (5 Dentents)(.475”Wide) (1.715”Tall) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 203410A | Park/Neutral Switch, RE0F09A/F09B (With TFT)(Cast # PA66-GF30)(7 Prong Connector) 2003-Up | 1 |
| 414 | Part # 243414A | Switch, RE0F08B (JF009E) Pressure Control A (3 Pin Rectangle Connector) (CP5-15 R9CZ12 C24)(1 O-Ring) 2009-Up | — |
| 414 | Part # 243414B | Sensor, RE0F08A(JF009E) Secondary Fluid Pressure A (3 Rectangle Connetor) (CP5-10 T7CZ24 C23 Cast)(Black Connector)… | — |
| 415 | Part # 243415B | Sensor, RE0F08A(JF009E) Primary Fluid B (3 Pin Rectangle Connector)(CP5-11 P7R14 MX8 Cast)(Screw In)(1.480”Long)… | — |
| 438 | Part # 212438A | Sensor, RE0F08A/F08B(JF009E) On Top Of Bell Housing (90 Degrees)(.665”OD O-Ring) (1.920”Long) 2009-Up… | — |
| 438 | Part # 243438A | Replaced by 212438A | — |
| 446 | Part # 243446A | Wire Harness, RE0F08B (JF009E) (22 Pin Main Connector) 2009-Up | — |
| 446 | Part # 243446B | Wire Harness, RE0F08A(JF009E) (22 Pin Connector) 2007-Up | — |
| 452 | Part # 243452A | Ratio Control Motor, RE0F08B (JF009E) (Stepper)(6 Blade Rectangle Connector)(2 Hole Bracket)(SMO1 9915) 2009-Up | — |
| 452 | Part # 243452B | Ratio Control Motor, RE0F08A(JF009E) (Stepper)(6 Blade Rectangle Connector)(2 Hole Bracket)(SM01 7919 Cast)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 243010A | Filter, RE0F08A/RE0F08B (JF009E) (Rectangular Pick Up)(Rectangle Pick Up) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 243070A | Seal, RE0F08A/RE0F08B (JF009E) Pump 2007-Up | — |
| 072 | Part # 60072 | Seal, A24A / M24A / S24A / MDLA / M4TA / MP7A / SP7A / S4XA / A4RA / B4RA / BMXA Manual Shaft | 3 |
| 076 | Part # 83076A | Seal, RE0F08A (JF009E) Bell Housing Side 2007-Up | 1 |
| 076 | Part # 83076AA | Seal, RE0F08A (JF009E) Axle Case Side 2002-Up | 1 |
| 076 | Part # 243076A | Replaced by 83076A | — |
| 077 | Part # 243077A | Replaced by 83076AA | — |
| 177 not on diagram | Part # 243177AT | Ring, RE0F08A/F08B (JF009E) Input Shaft To Pump (.960”OD)(.070”Thick)(Teflon) 2007-Up | — |
| 178 not on diagram | Part # 323178A | Ring, RE0F08A/F08B (JF009E) Secondary Pulley To Rear Cover (.660”OD)(.065”Thick)(Double Lap Joint) 2009-Up | — |
| 180 not on diagram | Part # 243180AT | Ring, RE0F08A/F08B (JF009E) Shaft (Rear)(.660”OD)(.065”Thick)(Double Lapped Joint) 2007-Up | — |
| 181 | Part # 243181AT | Ring, RE0F08A/F08B (JF009E) Pump Stator (2.305”OD)(.075”Thick)(Teflon)(Double Lap Joint) 2007-Up | — |
| 183 | Part # 243183AT | Sealing Ring, RE0F08A/F08B (JF009E) Secondary Pulley Piston (.103”Thick)(5.510”OD) (.120”Wide)(Teflon) 2007-Up | — |
| 187 | Part # 243187AT | Sealing Ring, RE0F08A/F08B (JF009E) Primary Pulley Piston (5.940”OD)(.110”Thick)(Teflon) 2007-Up | — |
| 300 | Part # 243300AF | Gasket, RE0F08A/RE0F08B (JF009E) Pan (Duraprene) (21 Holes) (19 Bolt Holes)(2 Dial Pin Hole) 2007-Up | — |
| 310 | Part # 243310A | Gasket, RE0F08A/F08B (JF009E) Pump Stator To Case (Metal Bonded) (.015”Thick)(16 Round Holes)(Horse Shoe Shape) 2007-Up | — |
| 311 | Part # 243311A | O-Ring, RE0F08A/F08B (JF009E) Pump Body To Bell (6 1/8”OD) (.120”Thick) 2007-Up | — |
| 335 | Part # 243335B | D-Ring, RE0F08A(JF009E) Forward Clutch Piston (Outer) (4.775”OD)(.070”Thick) 2007-Up | — |
| 336 not on diagram | Part # 243336B | Lathe Cut Seal, RE0F08A(JF009E) Forward Clucth Piston (Inner)(2.805”OD)(.070”Thick) 2007-Up | — |
| 342 not on diagram | Part # 212342A | Transfer Seal, RE0F08A/F08B (JF009E) Valve Body To Case (Rubber)(.125”Thick)(.630”OD) (.330”ID) 2007-Up | — |
| 344 not on diagram | Part # 212344A | O-Ring, RE0F08B (JF009E) Rear Cover To Case Transfer (.065”Thick)(.860”OD) 2009-Up | — |
| 347 | Part # 212347A | O-Ring, RE0F08B (JF009E) Case Connector To Case (1.320”OD)(.140”Thick) 2009-Up | — |
| 369 | Part # 243369A | O-Ring, RE0F08B (JF009E) Output Sensor To Bell Housing (.690”OD)(.080”Thick) 2009-Up | — |
| 369 | Part # 243369B | O-Ring, RE0F08A(JF009E) Sensor To Bell Housing (.690”OD) 2007-Up | — |
| 370 not on diagram | Part # 243370A | O-Ring, RE0F08B (JF009E) Sensor To Rear Cover (.695”OD) (.080”Thick) 2009-Up | — |
| 371 | Part # 212371A | O-Ring, RE0F08A/F08B (JF009E) Dipstick Tube To Case (.745”OD)(.100”Thick) 2007-Up | — |
| 371 | Part # 323371-1A | O-Ring, RE0F08A/F08B (JF009E) Dipstick To Tube (.570”OD)(.100”Thick) 2007-Up | — |
| 378 | Part # 212378A | Seal, RE0F10A (JF011E) (Nissan/Dodge) Oil Cooler To Case (Brass Or Copper)(.035”Thick) (.875”OD) 2007-Up | — |
| 380 not on diagram | Part # 243380A | O-Ring, RE0F08A/F08B (JF009E) Input Shaft To Converter (.845”OD) (.070”Thick) 2007-Up | — |
| 387 | Part # 243387B | Gasket, RE0F08A/F08B (JF009E) Drain Plug To Pan (Metal Bonded)(.715”OD)(.470”ID) (.048”Thick) 2009-Up | — |
| 387 | Part # 323387A | O-Ring, RE0F08A/F08B (JF009E) Partial Drain Plug To Case (.100”Thick) 2007-Up | — |
| 389 not on diagram | Part # 212389A | O-Ring, RE0F08A/F08B (JF009E) Rear Cover To Bearing Retainer (.455”OD) 2007-Up | — |
| 391 | Part # 212391A | O-Ring, RE0F08A/F08B (JF009E) Pressure Tap (.465”OD)(.085”Thick) 2007-Up | — |
| 391 | Part # 212391B | O-Ring, RE0F10A(JF011E) (Nissan/Dodge) Pressure Plug To Rear Cover (.940”OD) (.080”Thick) 2007-Up | — |
| 493 | Part # 243493A | Dipstick W/O-Ring, RE0F08A/F08B (JF009E)(10 5/8”Long) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 243034A | Bushing, RE0F08A/F08B (JF009E) (Babbitt)(Oil Pockets)(1.805”ID) (.415”Wide) 2007-Up | — |
| 035 | Part # 243035A | Bushing, RE0F08A/F08B (JF009E) (Inner Gear)(1.420”OD)(.395”Wide) (1.240”ID)(Babbitt) 2007-Up | — |
| 036 | Part # 243036A | Bushing, RE0F08A/F08B (JF009E) Stator (Front)(.815”ID)(.940”OD) (.415”Wide) 2007-Up | — |
| 047 | Part # 333047A | Bushing, RE0F08A/F08B (JF009E) Priamry Pulley To Input Shaft (Bronze)(.550”ID)(.540”Long) 2007-Up | — |
| 211 | Part # 243211A | Bearing W/Races, RE0F08A/F08B (JF009E) Pump To Drum (2.315”OD)(1.635”ID)(.140”Thick) 2007-Up | — |
| 227 | Part # 243227A | Washer, RE0F08A/F08B (JF009E) Secondary Pulley Nut To Bearing (Front)(.125”Thick) (1.622”OD)(.865”ID)… | 1 |
| 228 | Part # 243228A | Roller Bearing W/Inner Race, RE0F08A/F08B (JF009E) Secondary Pulley (Front)(14 Rollers) (2.440”OD)(.545”Thick)… | 1 |
| 229 | Part # 243229A | Ball Bearing, RE0F08A/F08B (JF009E) Secondary Pulley (Rear)(3.345”OD) (9 Balls)(.745”Thick) (Cast KOYO 6209-6SH)… | 1 |
| 230 | Part # 243230A | Shim, RE0F08A/F08B (JF009E) Secondary Pulley (3.320”OD) (Selective) 2009-Up | — |
| 232 | Part # 243232A | Bearing W/Race, RE0F08A/F08B (JF009E) Drum To Hub (2.550”OD)(1.935”ID)(.150”Thick) 2007-Up… | — |
| 235 | Part # 243235A | Ball Bearing, RE0F08B (JF009E) Primary Pulley (8 Balls)(2.045”OD)(.985”ID)(.547’Thick) (Cast KOYO 6205R-4/185H) 2009-Up | 1 |
| 235 | Part # 243235B | Ball Bearing, RE0F08A(JF009E) Primary Pulley (Sealed) (2.040”OD)(.980”ID)(.545”Thk) (Cast # KOYO 6205-3617B) 2007-Up | 1 |
| 236 | Part # 243236A | Shim, RE0F08A/F08B (JF009E) Primary Pulley (2.025”OD) 2007-Up (Selective) | — |
| 247 | Part # 243247A | Replaced by 243232A | — |
| 252 | Part # 243252A | Washer, RE0F08A/F08B (JF009E) Reverse Planet To Ring Gear (4.330”OD)(3.880”ID)(Plastic) (10 Inner Notches) 2007-Up… | — |
| 255 | Part # 243255A | Replaced by 243252A | — |
| 264 | Part # 243264A | Ball Bearing, RE0F08B (JF009E) Primary Pulley To Case (13 Balls) (3.145”OD)(.625”Thick) (Cast NTN A-N2-6010V31) 2009-Up | 1 |
| 264 | Part # 243264B | Ball Bearing, RE0F08A(JF009E) Primary Pulley To Case (Sealed)(3.145”OD)(1.975”ID) (.625”Thick) 2007-Up | — |
| 276 | Part # 243276A | Shim, RE0F08B (JF009E) Race To Case (.040”Thick)(2.068”OD) (1.770”ID) 2009-Up | — |
| 280 | Part # 243280A | Race, RE0F08A/F08B (JF009E) Pinion To Bell (Front & Rear) (2.085”OD)(.510”Thick) (KOYO STA 3053) 2007-Up | — |
| 281 | Part # 243281A | Roller Bearing, RE0F08A/F08B (JF009E) Pinion (Front & Rear)(1.180”ID) (21 Rollers) (Cast KOYO STA3053) 2007-Up | 1 |
| 290 | Part # 243290A | Shim, RE0F08A/F08B (JF009E) Differential To Case (3.130”OD)(Selective) 2007-Up | — |
| 292 | Part # 243292A | Ball Bearing, RE0F08A/F08B (JF009E) Differential To Bell (9 Balls)(3.150”OD)(1.570”ID) (.705”Thick)(Cast # NSK 6208A11)… | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 243500A | Pump Assembly, RE0F08A/F08B (JF009E) (9 Bolts To Case)(Aluminum) 2009-Up | — |
| 510 | Part # 243510A | Pump Body, RE0F08A/F08B (JF009E) With Gears (6.100”OD) (2.400”Seal Pocket) (3.575” Geo-Pocket)(8 Threaded Holes)… | — |
| 520 | Part # 243520A | Stator, RE0F08A/F08B (JF009E) Pump (9 Bolts To Case)(Aluminum)(8 Bolts To Body) (3.600”Tall Through Tube) 2007-Up | — |
| 530 | Part # 243530A | Pump Gear Set, RE0F08A/F08B (JF009E) (9 Teeth Inner)(10 Teeth Outer) (.414”Thick) (3.575”OD)(4 Slots For Converter)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 108 | Part # 243108A | Friction, RE0F08A/F08B (JF009E) Forward Clutch (30 Teeth)(4.895”OD)(.065”Thick) 2007-Up | — |
| 110 | Part # 243110A | Friction, RE0F08A/F08B (JF009E) Reverse Clutch (.065”Thick)(30 Teeth)(6.520”ID) 2007-Up | — |
| 119 not on diagram | Part # 243119A | Friction Module, RE0F08A/F08B (JF009E/JF012E) 2007-Up | — |
| 128 | Part # 243128A | Steel, RE0F08A/F08B (JF009E) Forward Clutch (24 Teeth)(.062”Thick) (4.260”ID)(5.140”OD) 2007-Up | — |
| 130 | Part # 243130A | Steel, RE0F08A/F08B (JF009E) Reverse Clutch (16 Teeth)(.062”Thick) (5.970”ID) 2007-Up | — |
| 131 | Part # 243131A | Cushion, RE0F08A/F08B (JF009E) Reverse Clutch (Dished)(4 Teeth) (.059”Thick)(6.020”ID) 2007-Up | — |
| 148 | Part # 243148A | Pressure Plate, RE0F08A/F08B (JF009E) (24 Teeth)(.135”Thick)(4.265”ID) 2007-Up | — |
| 150 | Part # 243150A | Pressure Plate, RE0F08A/F08B (JF009E) (16 Teeth)(.135”Thick)(5.970”ID) 2007-Up | — |
| 691 | Part # 212691-3A | Return Spring, RE0F08A/F08B Ratio Control Motor Follower (1.645”Long)(.820”OD & .810”OD Retainers On Each End) 2007-Up | — |
| 853 | Part # 243853A | Cushion, RE0F08B (JF009E) Foward (Dished)(4.955”OD) (4.255”ID)(.045”Thick) 2009-Up | — |
| 853 | Part # 243853B | Cushion, RE0F08A(JF009E) Foward Clutch (18 Fingers) (4.945”OD)(.110”Tall)(.062”Thk) 2007-Up | — |
| 960 | Part # 243960A | Piston, RE0F08A/F08B (JF009E) Secondary Pulley (2.063”Thick) (5.465”OD)(1.270”ID) 2007-Up | — |
| 964 | Part # 243964A | Piston, RE0F08B (JF009E) Foward Clutch (Bonded)(4.850”OD) (2.530”ID)(.540”Tall) 2009-Up | — |
| 964 | Part # 243964B | Piston, RE0F08A(JF009E) Foward Clutch (Alum)(4.825”OD) (2.545”ID)(18 Spring Pockets) 2007-Up | — |
| 966 | Part # 243966A | Piston, RE0F08A/F08B (JF009E) Reverse Clutch (Bonded)(1.735”Tall) (6.215”OD) (4.400”ID) 2007-Up | — |
| 974 | Part # 243974A | Return Spring, RE0F08B (JF009E) Foward (27 Springs) (3.650”OD)(1.790”ID)(.845”Tall) 2009-Up | — |
| 974 | Part # 243974B | Return Spring, RE0F08A(JF009E) Foward Clutch (18 Springs) (1.063”Tall)(2.515”ID) (3.802”OD) 2007-Up | — |
| 976 | Part # 243976-1A | Spring Seat, RE0F08A/F08B (JF009E) Reverse Clutch Spring To Piston (Tin)(.550”Tall) (4.795”ID)(5.810”OD) 2007-Up | — |
| 976 | Part # 243976A | Return Spring, RE0F08/F08B (JF009E) Reverse Clutch (Spiral Type) (5.430”OD)(5.005”ID) (.920”Thick) 2007-Up | — |
| 981 | Part # 243981A | Piston/Retainer, RE0F08B (JF009E) Primary Pulley (1.415”Thick) (Steel)(5.935”OD) (1.280”ID) 2009-Up | — |
| 981 | Part # 243981B | Piston, RE0F08A(JF009E) Primary Pulley (1.340”Thick) (5.935”OD)(1.280”ID) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 469 | Part # 243469A | ROM Assembly, RE0F08B (JF009E) Read Only Memory (5 Pin Rectangle Connector) (1.480”Long x .970”Wide) 2009-Up | — |
| 469 | Part # 243469B | ROM Assembly, RE0F08A(JF009E) Read Only Memory (1.935”Long) (1.340”Wide)(5 Pin Rectangle Connector) 2007-Up | — |
| 554 | Part # 243554A | Drum, RE0F08B (JF009E) Forward Clutch (Stamped Steel)(3 Clutch) (24 Teeth Steels) (2.280”ID Bore)(1.645”Tall)(5.360”OD)… | — |
| 554 | Part # 243554B | Drum, RE0F08A(JF009E) Forward Clutch (Stamped Steel)(3 Clutch)(24 Teeth Steels) (2.320”ID Bore)(1.645”Tall) 2007-Up | — |
| 587 | Part # 243587A | Planet, RE0F08A/F08B (JF009E) Reverse Clutch (8 Gears)(Steel) (24 Outer Lugs)(17 Teeth Left Angle)… | — |
| 597 | Part # 243597A | Ring Gear, RE0F08A/F08B (JF009E) Reverse Hub (82 Teeth Right Angle) (30 Outer Clutch Splines)(1.975” Tall)(5.980”OD)… | — |
| 617 | Part # 243617A | Clutch Hub, RE0F08A/F08B (JF009E) Foward Clutch (W/42 Teeth) (Left Angle Sun Gear) (30 Clutch Splines)(34 Inner… | — |
| 670 | Part # 243670A | Input Shaft, RE0F08A/F08B (JF009E) (7 5/8”Long)(.550”OD Pilot) (4 Teflon Rings) 2007-Up | — |
| 690 | Part # 243690A | Park Gear, RE0F08A/F08B (JF009E) Secondary Pulley (8 Notches) (24 Splines)(.655”Thick) (3.110”OD) 2007-Up | — |
| 705 | Part # 243705A | Pulley Half, RE0F08B (JF009E) Primary (Front)(7”Long) (6 1/32”OD)(1.258”OD) 2009-Up | — |
| 705 | Part # 243705B | Pulley Half, RE0F08A(JF009E) Primary (Front)(7”Long) (6 1/32”OD)(34 Splines)(.985”Pilot) 2007-Up | — |
| 706 | Part # 243706A | Pulley Half, RE0F08A/F08B (JF009E) Secondary (Front)(2.875”Thick) (6.195”OD)(5.455”ID Piston Pocket) 2007-Up | — |
| 707 | Part # 243707A | Pulley Half, RE0F08B (JF009E) Primary (Rear)(2.425”Tall) (6.235”OD At Reluctor With 30 Splines)(5.940”ID Pocket)… | — |
| 707 | Part # 243707B | Pulley Half, RE0F08A(JF009E) Primary (Rear)(2.410”Tall) (6.290”OD)(5.940”ID Pocket) 2007-Up | — |
| 708 | Part # 243708A | Pulley Half, RE0F08A/F08B (JF009E) Secondary (Rear)(10 1/16”Long) (6.195”OD)(24 Spline) 2007-Up | — |
| 710 | Part # 243710A | Gear, RE0F08A/F08B (JF009E) Secondary Pulley (Front)(35 Teeth) (No Groove)(.915”Thick) (2.925”OD) 2007-Up | — |
| 712 | Part # 243712A | Gear, RE0F08A/F08B (JF009E) Driven Transfer (52 Teeth Left Angle) (32 Splines)(.955”Thick) (.880”Thick At Teeth)… | — |
| 715 not on diagram | Part # 243715A | Differential Assembly, RE0F08A/F08B(JF009E) (8 Bolt)(70 Teeth Ring Gear) 2007-Up | — |
| 716 | Part # 243716A | Differential Housing, RE0F08A/F08B (JF009E) (1.575”OD Nose)(5.665”Tall) (8 Bolt) (2 Windows)(Ribbed On Rear) 2007-Up | — |
| 720 not on diagram | Part # 243720A | Ring Gear, RE0F08A/F08B (JF009E) Differential (70 Teeth)(1.390”Thick) (7.750”OD) 2007-Up | — |
| 730 | Part # 243730A | Pinion, RE0F08A/F08B (19 Teeth Left Angle)(1 Center Groove) (4.615”Long)(.865”OD) 2007-Up | — |
| 750 | Part # 243750A | Bell Housing, RE0F08B (JF009E) (9 3/8” Top Bolts) (FYD Cast #)(20 Bolts To Case) (2:30 Closed Starter)… | — |
| 750 | Part # 243750B | Bell Housing, RE0F08A(JF009E) (9 3/8”Top Bolts)(20 Bolts To Case)(2 Threaded Holes Above Starter)(2.205”OD) 2007-Up | — |
| 759 | Part # 243759A | Rear Cover, RE0F08B (JF009E) (14 Bolts To Case)(FYB Casting)(No Speed Sensor) (1 Ring For Secondary Lube) 2007-Up | — |
| 759 | Part # 243759AK | Rear Cover With Pulley Assembly, RE0F08B (JF009E)(14 Bolts To Case)(FYB Casting) (No Speed Sensor)… | — |
| 759 | Part # 243759BK | Rear Cover With Pulley Assembly, RE0F08A (JF009E)(14 Bolts To Case)(ALO Cast) (With Speed Sensor) 2009-Up… | — |
| 760 | Part # 243760A | Case, RE0F08B (JF009E) (20 Bolts To Bell)(14 To Rear Cover) (ALO Cast) ( 2.200”Axle Seal OD) (19 Pan Bolts) 2009-Up | — |
| 760 | Part # 243760B | Case, RE0F08A(JF009E) (20 Bolts To Bell)(14 To Rear Cover) (FYB Cast #) (Stud On Top For Linkage) 2007-Up | — |
| 769 | Part # 243769A | Housing W/ Filter, RE0F08A/F08B (JF009E) Cooler (4 Bolt Aluminum) (Glued In Filter) (25450-PWR-003 OE Number) 2007-Up | — |
| 992 | Part # 243992-1B | Dust Cover, RE0F08A(JF009E) Covers Pivot Joint On External Linkage (1.280”Long) (1.075”Tall) (Plastic) 2007-Up | — |
| 995 | Part # 243995A | Park Pawl Assembly, RE0F08A/F08B (JF009E) (4 Pieces) (Pawl- .390”Thk)(Pin- .430”OD) (Spring- 1.210”OD)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 289 | Part # 243289A | Replaced by U243292A | — |
| 469 | Part # 243469B-1 | Bracket, RE0F08A(JF009E) For ROM Assembly (2 Bolt)(2.720”Wide)(.750”Tall Legs) 2007-Up | — |
| 488 | Part # 212488A | Plug, RE0F08A (JF009E) Pressure In Rear Cover (10mm Allen Head)(.755”Long) (1.095”/.860”OD) 2007-Up | — |
| 492 | Part # 243492 | Drain Plug, RE0F08A/F08B (JF009E) Bottom Pan (19mm Hex x .645”Long) 2007-Up | — |
| 492 | Part # 323492A | Drain Plug, RE0F10A (JF011E) (Nissan/Dodge) Partial (10mm Allen Head)(1.095” / .860” Thick) (.750”Long) In Case Below… | — |
| 494 | Part # 243494A | Dipstick Tube, RE0F08A/F08B (JF009E) (1 Bolt Flange)(9 1/2”Long) 2007-Up | — |
| 496 | Part # 243496A | Cooler Line, RE0F08B (JF009E) (Front)(Banjo Fitting) (C Shape With Alignment Bracket) 2009-Up | — |
| 496 | Part # 243496AB | Cooler Line, RE0F08A(JF009E) (Front)(Banjo Fitting) (3 Bends)(9 1/4”Long) 2007-Up | — |
| 496 | Part # 243496B | Cooler Line, RE0F08B (JF009E) (Rear)(Banjo Fitting)(Slight Bend)(Alignment Bracket) 2009-Up | — |
| 496 | Part # 243496BB | Cooler Line, RE0F08A(JF009E) (Rear)(Banjo Fitting) (6”Long)(2 Bends)(No Bracket) 2007-Up | — |
| 691 | Part # 243691-2A | Guide Pin, RE0F08B (JF009E) Ratio Control Motor Follower (6.205”Long) 2009-Up | — |
| 691 | Part # 243691A | Ratio Control Motor Follower, RE0F08A/F08B (JF009E) (Aluminum) (2.625”Long)(.170”/375” Thick At Fork) 2007-Up | — |
| 692 | Part # 243692A | Retainer, RE0F08A/F08B (JF009E) Holds Secondary Pulley To Horseshoe Clips (.200”Thick) (2.055”OD)(1.815”ID) 2007-Up | — |
| 696 | Part # 243696A | Bracket, RE0F08A/F08B (JF009E) Secondary Pulley Bearing To Rear Cover (3 Bolt)(2.930”ID) (.390”Thick) 2007-Up | — |
| 698 | Part # 243698A | Oil Deflector RE0F08A/F08B (JF009E) Differential To Bell (1.550”Tall) (4 Bolt)(8”OD) 2007-Up | — |
| 699 | Part # 243699A | Oil Deflector, RE0F08A/F08B (JF009E) Differential To Case (1.460”Tall) (4 Bolt)(7 3/4”OD) 2007-Up | — |
| 761 | Part # 212761A | Plug Pressure Tap, RE0F08A/F08B (14mm Hex x .670”Long) 2007-Up | — |
| 795 | Part # 243795A | Nut, RE0F08B (JF009E) Primary Pulley (46mm)(6pt Right Hand Thread) (.305”Thick) (1.222”ID) 2009-Up | — |
| 796 | Part # 243796A | Nut, RE0F08A/F08B (JF009E) Pinion Shaft (32mm)(.475”Thick) (1.430”OD)(8.25”ID) 2007-Up | — |
| 797 | Part # 243797-1A | Nut, RE0F08A/F08B (JF009E) Secondary Pulley (Front)(40mm)(6 Point) (.410”Thick) (.827”ID) 2007-Up | — |
| 797 | Part # 243797A | Nut, RE0F08A/F08B (JF009E) Secondary Pulley (Rear)(55mm)(6 Point) (.280”Thick) (1.735”ID) 2007-Up | — |
| 799 | Part # 243799B | Nut, RE0F08A(JF009E) Holds External Linkage (6 Point) (19mm)(RH Threads) (.315”Thick) 2007-Up | — |
| 799 | Part # 323799-1A | Nut, RE0F08A/F08B(JF009E) Holds Internal Lever To End Of Shaft (14mm Hex) (RH Threads) 2007-Up | — |
| 843 not on diagram | Part # 212843A | Clip, RE0F10A (JF011E) (Nissan/Dodge) Case Connector To Case (1.300”Long)(.050”Wire) (1.080”Wide) 2007-Up | — |
| 860 | Part # 243860A | Snap Ring, RE0F08A/F08B (JF009E) Holds Balls To Secondary Pulley (1.805”OD) (.085”Thick Wire) 2007-Up | — |
| 860 | Part # 243860B | Snap Ring, RE0F08A/F08B (JF009E) Holds Balls To Secondary Pulley (Rear)(1.600”OD) (.085”Thick Wire) 2007-Up | — |
| 861 | Part # 243861A | Snap Ring, RE0F08A/F08B (JF009E) Holds Primary Ball Retainer To Pulley (1.535”OD) (.090”Wire OD) 2007-Up | — |
| 865 | Part # 243865A | Snap Ring, RE0F08A/F08B (JF009E) Primary Rear Half (1.795”OD) (.185”Wire) 2007-Up | — |
| 876 | Part # 243876A | Snap Ring, RE0F08B (JF009E) Holds Foward Clutch In Drum (.098”Thick)(5.265”OD) (.195”Wide) 2009-Up | — |
| 877 | Part # 243877A | Snap Ring, RE0F08B (JF009E) Holds Retainer To Drum (2.625”OD)(.035”Thick)(.117”Wide) 2009-Up | — |
| 880 | Part # 243880A | Snap Ring, RE0F08A/F08B (JF009E) Holds Input Shaft To Drum (.960”OD)(.045”Thick) 2007-Up | — |
| 887 | Part # 243887A | Horse Shoe Clips, RE0F08A/F08B (JF009E) Secondary Pulley (.290”Thick)(1.800”Long) (Takes 2 Pieces Per Unit) 2007-Up | — |
| 888 | Part # 243888B | Horse Shoe Clips, RE0F08A (JF009E) Secondary Pulley (.210”Thick)(1.795”Long)(2 Pcs) 2007-Up | — |
| 892 | Part # 243892A | Snap Ring, RE0F08A/F08B (JF009E) Holds Reverse Clutch (.092”Thick) (6.995”OD) (.200”Wide) 2007-Up | — |
| 893 | Part # 243893A | Snap Ring, RE0F08A/F08B (JF009E) Holds Reverse Clutch Retainer To Case (4.450”OD) (.035”Thick)(.140”Wide) 2007-Up | — |
| 899 | Part # 243899A | Snap Ring, RE0F08A/F08B (JF009E) Holds Retainer To Secondary Pulley (Front) (.065”Thick)(5.965”OD)(.160”Wide) 2007-Up | — |
| 970 | Part # 243970B | Spring, RE0F08A (JF009E) Secondary Pulley (3.080”Tall) (2.725”OD)(.240”Wire OD) 2007-Up | — |
| 971 | Part # 243971A | Spring, RE0F08B (JF009E) Primary Pulley Piston Return (2.745”OD)(3.085”Tall)(.240”Wire) 2009-Up | — |
| 971 | Part # 243971B | Spring, RE0F08A (JF009E) Primary Pulley Piston Return (2.685”OD)(3.085”Tall) (.203”Wire Size) 2007-Up | — |
| 980 | Part # 243980A | Retainer, RE0F08A/F08B (JF009E) Secondary Pulley Piston (2.405”Tall)(5.550”OD) 2007-Up | — |
| 984 | Part # 243984A | Retainer, RE0F08B (JF009E) Foward (Bonded)(4.670”OD) (2.510”ID)(.490”Thick) 2009-Up | — |
| 986 | Part # 243986A | Retainer, RE0F08A/F08B (JF009E) Reverse Clutch (4.355”ID) (5.550”OD)(Steel) (.195”Thick) 2007-Up | — |
| 991 | Part # 203991-5A | Pin, RE0F08A/F08B (JF009E) Holds Manual Shaft In Place(.156” OD, 1.980” Long) 2007-Up | — |
| 991 | Part # 203991-8A | Sleeve, RE0F09A/F09B Manual Shaft To Valve Body (.510”Thick)(.590”OD)(.475”ID) 2003-Up | — |
| 991 | Part # 243991-2A | Dentent, RE0F08A/F08B (JF009E) (4.015”Long)(.828”Wide) 2007-Up | — |
| 991 | Part # 243991-7A | Roll Pin, RE0F08A/F08B (JF009E) Rooser Comb To Shaft 2007-Up | — |
| 991 | Part # 323991-1A | Lever, RE0F10A (JF011E) (Nissan/Dodge) Internal Linkage (2.240” Long)(.125”Thick) 2007-Up | — |
| 992 | Part # 243992A | Linkage Lever, RE0F08B (JF009E) External (W/15 3/4”Rod) (Threaded End & Stud) 2009-Up | — |
| 992 | Part # 243992B | External Linkage, RE0F08A(JF009E) (14”Long Shaft)(4 Piece Pivoting Linkage)(.470”OD) 2007-Up | — |
| 994 | Part # 243994A | Park Rod, RE0F08A/F08B (JF009E) (3.215”Long)(.815”OD Head) 2007-Up | — |
| 996 | Part # 243996A | Bolt, RE0F08A/F08B (JF009E) Banjo Fitting To Case (17mm Hex x 1.530”Long) 2007-Up | — |
| 999 | Part # 243999-1A | Oil Tube, RE0F08A/F08B (JF009E) Case To Lube Belt (4”Long) (2 Bends)(.465”OD Head) 2007-Up | — |
| 999 | Part # 243999-6A | Oil Tube, RE0F08A/F08B (JF009E) On Bell For Lube (7 Bends) (.250”OD)(8 1/2”Long At Tips) 2007-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.