RE7R01A parts diagram
Transmission page:
Positions:
204 total, 165 on the diagram
Parts:
231 total, 12 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 283002AF | Overhaul Kit, RE7R01A (W/Farpak Pan Gasket) 2009-Up (For Bonded Pistons Order A283960AK Seperately) | — |
| 004 not on diagram | Part # 283004AF | Master L/Steels Kit, RE7R01A 2009-Up (V6) (For Bonded Pistons Sell A283960AK) | — |
| 004 not on diagram | Part # 283004BF | Master L/Steels Kit, RE7R01A 2009-Up (For Bonded Pistons Order A283960AK) | — |
| 006 not on diagram | Part # 283006AF | Master W/Steels Kit, RE7R01A 2009-Up (For Bonded Pistons Sell A283960AK) | — |
| 006 not on diagram | Part # 283006BF | Master W/Steels Kit, RE7R01A 2009-Up (For Bonded Pistons Sell 283960AK Also) | — |
| 030 not on diagram | Part # 283030A | Bushing Kit, RE7R01A (Contains 7 Bushings) 2008-Up | — |
| 560 not on diagram | Part # 283560A | Piston Kit, RE7R01A B3 2-3-4-6 Clutch (3 Pieces)(Contains: Piston, Spring Retainer, Snap Ring) 2008-Up | — |
| 561 not on diagram | Part # 283561A | Piston Kit, RE7R01A B1 Brake Clutch (3 Pieces)(Contains: Piston, Spring Retainer, Snap Ring) 2008-Up | — |
| 562 not on diagram | Part # 283562A | Piston Kit, RE7R01A C1 Input Clutch (4 Pieces)(Contains: Piston, Spring Retainer, Bonded Retainer, Snap Ring) 2008-Up | — |
| 563 not on diagram | Part # 283563A | Piston Kit, C3 Low/Reverse Clutch (4 Pieces)(Contains: Piston, Spring Retainer, Bonded Retainer, Snap Ring) 2008-Up | — |
| 564 not on diagram | Part # 283564A | Piston Kit, RE7R01A C2 Direct Clutch (4 Pieces)(Contains: Snap Ring, Bonded Retainer, Spring Retainer, Piston) 2008-Up | — |
| 565 not on diagram | Part # 283565A | Piston Kit, RE7R01A B4 Reverse Brake (4 Pieces) 2008-Up (Contains: Snap ring, Retainer, Spring, Piston) | — |
| 566 not on diagram | Part # 283566A | Piston Kit, RE7R01A B2 Low Brake Clutch (3 Pieces) (Contains:Snap Ring, Spring Retainer, Piston) 2008-Up | — |
| 741 not on diagram | Part # 283741CCK | Valve Kit, RE7R01A TCC Control Plunger (Contains: Valve & Sleeve) | — |
| 741 not on diagram | Part # 283741POSK | Valve Kit, RE7R01A & B Pilot (Oversized) (Contains: Valve & End Plug) | — |
| 776 not on diagram | Part # 283776AK | Bolt Set, RE7R01A Bell Housing To Case (14mm Hex Head) (1.725”Long) (10 Pieces) 2009-Up | — |
| 777 | Part # 283777AK | Bolt Set, RE7R01A Pump To Case (14mm Hex)(2.825”Long) 2008-Up | — |
| 778 not on diagram | Part # 283778AK | Bolt Set, RE7R01A Stator To Body (5mm Allen Head)(9pcs) (.820”Long) 2008-Up | — |
| 779 | Part # 283779AK | Bolt Set, RE7R01A Pan To Case (10mm Hex Head)(.654”Long) (24 Pieces) 2008-Up | — |
| 781 not on diagram | Part # 283781AK | Bolt Set, RE7R01A Tail Housing To Case 14mm Hex Head (1.710”Long)(12 Pieces) 2008-Up | — |
| 782 not on diagram | Part # 283782AK | Bolt Set, RE7R01A Valve Body To Case (10mm Hex Head) (1.794”Long)(5 Pieces) (10mm Hex Head)(2.340”Long)(9 Pieces)… | — |
| 790 | Part # 283790AK | Bolt Set, RE7R01A B2 Support To Case (1.873”Long) (T-40 Torx)(3 Pieces) 2008-Up | — |
| 793 not on diagram | Part # 283793AK | Bolt Set, RE7R01A Filter To Valve Body (1-10mm Hex Head x .820”Long (12-10mm Hex Head x 1.984”Long) 2008-Up | — |
| 960 | Part # 283960AHPK | Piston Kit, RE7R01A (JR710E/JR711E) 2008-Up (Hi-Per Blue) | — |
| 960 | Part # 283960AK | Piston Kit, RE7R01A (JR710E/JR711E) 2009-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 283421A | Solenoid, RE7R01A “A” (On/Off) 2008-Up | — |
| 422 | Part # 283422A | Solenoid, RE7R01A “B” (PWM) 2008-Up | — |
| 423 | Part # 283423A | Solenoid, RE7R01A “C” (PWM) 2008-Up | — |
| 425 not on diagram | Part # 283425A | Solenoid, RE7R01A “TCC” (PWM) 2008-Up | — |
| 426 | Part # 283426A | Solenoid, RE7R01A “D” (PWM) 2008-Up | — |
| 427 | Part # 283427A | Solenoid, RE7R01A “E” (PWM) 2008-Up | — |
| 428 | Part # 283428A | Solenoid, RE7R01A “A” (PWM) 2008-Up | — |
| 430 | Part # 283430A | Solenoid, RE7R01A “F” (PWM) 2008-Up | — |
| 432 | Part # 283432A | Solenoid, RE7R01A “G” (PWM) 2008-Up | — |
| 740 not on diagram | Part # 283740A | Valve Body, RE7R01A W/Solenoids (Early Models)(9 Solenoids) (TECM Plate)… | — |
| 740 not on diagram | Part # 283740AA | Valve Body, RE7R01A W/Solenoids (Late Models)(9 Solenoids)(TECM Plate) (W/Out Oil Circut Pressure Switch) | — |
| 991 | Part # 283991-3A | Rooster Comb, RE7R01A (3.495”Long)(.470”ID) (6 Detents) (.832”Thick At Center) 2008-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 283410A | Switch, RE7R01A PRNDL (2 Bolts To The Valve Body)(9 Pin Connector)(4.120”Long) 2008-Up | — |
| 414 not on diagram | Part # 283414A | Pressure Switch, RE7R01A Low Reverse Oil Circuit (Early Models Only)(Screws On Valve Body) (3 Prong Connector) 2008-Up | — |
| 436 | Part # 283436A | Sensor, RE7R01A Output (16 15/16”Long)(Green Connector) (3 Wire)(1 Bolt) (.664”OD Metal Sensor Tip) 2008-Up | — |
| 444 not on diagram | Part # 283444A | Connector, RE7R01A Case (12 or 13 Pin Rectangle) (3.032”Long)(Early) | — |
| 444 not on diagram | Part # 283444B | Connector, RE7R01A Case (10 Pin Rectangle) (3.032”Long)(Late) 2008-Up | — |
| 446 not on diagram | Part # 283446A | Wire Harness, RE7R01A Low Reverse Pressure Switch To TECM Plate (3 Prong Connector On Each End)(8”Long) 2008-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 283010A | Filter, RE7R01A Pan (All Metal)(18 Bolt Holes) (3.103”Long Pick Up)(.782”Wide Pick Up) (.588”Tall Pick Up) 2008-Up | — |
| 765 | Part # 283765A | Pan, RE7R01A (24 Bolt Holes)(1 Drain Plug) (.545”At The Deepest)(2 Magnets) (1 Filler Tube Pipe)(4x4) 2008-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 283070A | Seal, RE7R01A Front (2.485”OD) (1.785”ID)(.295”Thick) 2008-Up | — |
| 072 | Part # 283072A | Seal, RE7R01A Linkage (.870”OD)(.456”ID)(.275”Thick) 2008-Up | — |
| 074 | Part # 73074D | Seal, RE5RO5A Rear (2WD)(2.450”OD)(1.685”ID) 2002-Up | 1 |
| 074 | Part # 173074B | Seal, RE5RO5A Extension Housing (4X4) (2.575”OD)(1.825”ID) 2002-Up | — |
| 177 | Part # 22177AT | Ring, 5EAT Input Shaft (1.175”OD)(Teflon) 2004-Up | — |
| 179 | Part # 173179AT | Ring, 5EAT Reverse Clutch (2.928” OD)(Teflon, Lap Joint) 2005-Up | — |
| 180 not on diagram | Part # 283180AT | Ring, RE7R01A Output Shaft (1.328”OD)(1.203”ID)(.091”Thick) (Double Lap Joint) (Scallops) 2008-Up | — |
| 181 | Part # 283181AT | Ring, RE7R01A Stator Tube (Butt Joint)(Teflon)(2.402”OD)(.076”Thick) 2008-Up | — |
| 183 not on diagram | Part # 173183AT | Ring, 5EAT Forward Sun Gear Shaft (1.745” OD)(Teflon, Lap Joint) 2005-Up | — |
| 300 | Part # 283300AF | Gasket, RE7R01A Pan 2009-Up (Duraprene) | — |
| 305 | Part # 283305A | Gasket, RE7R01A Tail Housing (12 Bolt Holes)(4 Windows) 2008-Up | — |
| 310 | Part # 283310A | O-Ring, RE7R01A Stator To Case (.115”Thk)(10 1/4”OD) 2008-Up | — |
| 311 | Part # 183311A | O-Ring, A750/A761 Pump Body 2003-Up | 1 |
| 328 | Part # 283328A | D-Ring, RE7R01A Inner B1 Brake Piston (6 1/2”OD)(.065”Thick) 2008-Up | — |
| 329 | Part # 283329A | D-Ring, RE7R01A Outer B1 Brake Piston (7 1/8”OD)(.068”Thick) 2008-Up | — |
| 330 | Part # 283330A | Lathe Cut Seal, RE7R01A B3 2-3-4-6 Piston Clutch (Inner)(.115”Thick) (2.465”ID) 2008-Up | — |
| 331 | Part # 283331A | Lathe Cut Seal, RE7R01A B3 2-3-4-6 Piston Clutch (Outer)(3.500”OD) (.130”Thick) 2008-Up | — |
| 332 | Part # 283332A | Lathe Cut Seal, RE7R01A C1 Clutch Piston (Inner)(2.246”OD)(.075”Thick) 2008-Up | — |
| 333 | Part # 283333A | D-Ring, RE7R01A C1 Clutch Piston (Outer)(3.767”OD)(.081”Thick) 2008-Up | — |
| 334 | Part # 283334A | Lathe Cut Seal, RE7R01A C3 Clutch Piston (Inner)(2.767”OD)(2.456”ID) (.084”Thick) 2008-Up | — |
| 335 | Part # 283335A | D-ring, RE7R01A C3 Clutch Piston (Outer)(3.843”OD)(3.725”ID) (.081”Thick) 2008-Up | — |
| 336 not on diagram | Part # 283336A | Lathe Cut Seal, RE7R01A C2 Direct Piston (Front)(Inner)(3.742”OD) (3.436”ID) (.082”Thick) 2008-Up | — |
| 336 not on diagram | Part # 283336AA | Lathe Cut Seal, RE7R01A C2 Direct Piston (Rear)(Inner)(3.825”OD) (3.558”ID) (.083”Thick) 2008-Up | — |
| 337 not on diagram | Part # 283337A | D-Ring, RE7R01A C2 Direct Piston (Front)(Outer)(4.725”OD) (4.496”ID) (.082”Thick) 2008-Up | — |
| 337 not on diagram | Part # 283337B | D-Ring, RE7R01A C2 Direct Piston (Rear)(Outer)(4.395”OD) (4.048”ID) (.082”Thick) 2008-Up | — |
| 338 | Part # 283338A | Lathe Cut Seal, RE7R01A B4 Reverse Brake (Inner)(3.951”OD)(3.563”ID) (.082”Thick) 2008-Up | — |
| 339 | Part # 283339A | Lathe Cut Seal, RE7R01A B4 Reverse Brake (Outer)(6 5/16”OD)(6 1/16”ID) (.081”Thick) 2008-Up | — |
| 340 | Part # 283340A | Lathe Cut Seal, RE7R01A B2 Piston (Inner)(2.570”OD)(2.278”ID) (.083”Thick) 2008-Up | — |
| 340 | Part # 283340B | Lathe Cut Seal, RE7R01A B2 Piston (Center)(4.145”OD)(3.880”ID) (.084”Thick) 2008-Up | — |
| 341 | Part # 283341A | D-Ring, RE7R01A B2 Piston (Outer)(5.697”OD)(5.364”ID) (.082”Thick) 2008-Up | — |
| 347 | Part # 283347A | O-Ring, RE7R01A Case Connector (1.230”OD)(.989”ID) (.118”Thick) 2008-Up | — |
| 376 | Part # 283376A | O-Ring, RE7R01A Solenoid (Large) 2008-Up | — |
| 376 | Part # 283376B | O-Ring, RE7R01A Solenoid (Small) 2008-Up | — |
| 380 not on diagram | Part # 283380A | O-Ring, RE7R01A Input Shaft To Torque Converter (1.060”OD) (.075”Thick) 2008-Up | — |
| 494 not on diagram | Part # 283494P | O-Ring, RE7R01A Filler Tube Plug To Case (.811”OD)(.620”ID)(.094”Thick) 2008-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 283034A | Bushing, RE7R01A Pump (1.805”ID)(1.925”OD)(Oil Pockets) 2008-Up | — |
| 039 | Part # 283039A | Bushing, RE7R01A B1 Clutch Hub (1.820”OD)(1.690”ID) (.641”Wide)(2 Grooves) (Oil Pockets) 2008-Up | — |
| 048 | Part # 283048A | Bushing, RE7R01A Inside Input Clutch Drum (.980”ID) (.655”Wide)(Grooved) (Oil Pockets) 2008-Up | — |
| 049 | Part # 283049A | Bushing, RE7R01A P3 Sun Gear (Front)(1.315”ID)(Oil Pockets) 2008-Up | — |
| 050 not on diagram | Part # 283050A | Bushing, RE7R01A P3 Sun Gear (Rear)(1.475”OD)(Oil Pockets) 2008-Up | — |
| 056 | Part # 283056A | Bushing, RE7R01A P4 Sungear (2.082”OD)(1.940”ID)(.410”Thick) 2008-Up | — |
| 061 | Part # 283061A | Bushing, RE7R01A C2 Direct Drum (2.792”ID)(Oil Pockets) (.510”Thick) 2008-Up | — |
| 064 | Part # 283064A | Bushing, RE7R01A Case (Rear)(1.286”ID)(.788”Thick) (1 Groove)(Oil Pockets) 2008-Up | — |
| 209 | Part # 283209A | Needle Bearing, RE7R01A Rear Stator Tube (Inner)(.728”Tall) (Cast # NTN 7E-HKS) (32.2x37.2x20)(1.460”OD) 2008-Up | 1 |
| 211 | Part # 283211A | Bearing w/Race, RE7R01A Stator To B1 Clutch Hub (2.350”OD) (1.782”ID) (.110”Thick) 2008-Up | — |
| 212 | Part # 283212A | Race, RE7R01A Stator To B1 Clutch Hub (2.297”OD)(1.745”ID)(.057”Thick) 2008-Up | — |
| 214 | Part # 283214A | Bearing w/Race, RE7R01A Sun Gear Clutch Hub To P1 Planetary (3.690”OD)(2.891”ID) (.144”Thick) 2008-Up | — |
| 217 | Part # 283217A | Bearing w/Races, RE7R01A P1 Planet To P2 Planet (3.318”OD) (2.630”ID) (.141”Thick/.255”Thick) 2008-Up | — |
| 220 | Part # 283220A | Bearing w/Races, RE7R01A P2 Planet To Input Drum (3.028”OD) (2.286”ID) (.143”Thick) 2008-Up | — |
| 223 | Part # 283223A | Bearing w/Race, RE7R01A Input Drum To P3 Planet (1.840”OD) (1.146”ID) (.110”Thick) 2008-Up | — |
| 235 | Part # 283235A | Bearing w/Races, RE7R01A Sun Gear To C3 Clutch Hub (3.616”OD)(2.800”ID) (.142”Thick) 2008-Up | — |
| 238 | Part # 283238A | Bearing w/Race, RE7R01A P3 To P4 Planet (Front)(3.298”OD) (2.707”ID)(.119”Thick) 2008-Up | — |
| 239 | Part # 283239A | Race, RE7R01A P3 to P4 Planet Rear (3.205”OD)(2.533”ID) (.115”Thick/.024”Thick) 2008-Up | — |
| 251 | Part # 283251A | Bearing w/Race, RE7R01A P4 Planet To P4 Sun Gear (3.138”OD) (2.600”ID) (.109”Thick) 2008-Up | — |
| 253 | Part # 283253A | Race, RE7R01A C3 Clutch Hub To C3 Drum (Front)(2.360”OD) (1.950”ID) (.088”Thick) 2008-Up | — |
| 254 | Part # 283254A | Needle Brg, RE7R01A C3 Clutch Hub To C3 Drum (2.353”OD) (1.751”ID) (.078”Thick) 2008-Up | — |
| 255 | Part # 283255A | Race, RE7R01A C3 Clutch Hub To C3 Drum (Rear)(2.402”OD) (1.745”ID) (.103”Thick) 2008-Up | — |
| 257 | Part # 283257A | Bearing w/Races, RE7R01A C3 Drum To B2 Support (2.460”OD) (2.028”ID) (.140”Thick/.237”Thick) 2008-Up | — |
| 258 | Part # 283258A | Bearing w/Race, RE7R01A C2 Drum To B2 Support (3.615”OD) (2.933”ID)(.110”Thick) 2008-Up | — |
| 259 | Part # 283259A | Washer, RE7R01A B2 Support To B2 Clutch Hub (2.348”OD) (1.889”ID)(.059”Thick) (Plastic) 2008-Up | — |
| 261 | Part # 283261A | Washer, RE7R01A B2 Clutch Hub To Case (2.088”OD)(.120”Thick) (1.950”ID) (Plastic) 2008-Up | — |
| 263 | Part # 283263A | Bearing w/Races, RE7R01A Case To Park Gear (Rear)(2.554”OD) (1.840”ID) (.160”Thick) 2008-Up | — |
| 264 | Part # 283264A | Cup Race, RE7R01A B2 Clutch Hub To Case (2.256”OD)(1.780”ID) (.125”Thick/.043”Thick) 2008-Up | — |
| 271 | Part # 283271A | Bearing w/race, RE7R01A Output Shaft To Tail Housing (2.357”OD) (1.780”ID) (.127”Thick) 2008-Up | — |
| 272 | Part # 283272A | Race, RE7R01A Output Shaft To Tail Housing (2.273”OD) (1.511”ID)(.196”Thick) 2008-Up | — |
| 387 not on diagram | Part # 283387A | Washer, RE7R01A Drain Plug (.055”Thick) (.575”OD)(.316”ID)(Copper) 2008-Up | — |
| 494 not on diagram | Part # 283494-1A | Washer, RE7R01A Fill Plug (.031”Thick)(.689”OD) (.475”ID)(Aluminum) 2008-Up | — |
| 660 | Part # 283660A | Inner Race, RE7R01A (48 Planet Teeth)(36 Lugs)(60 Slots) (3.470”Tall)(7 7/16”OD) (7 5”16”ID) 2008-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 283500A | Pump Assembly, RE7R01A (Cast Iron Body, W/13 Lug Inner Gear & W/15 Lug Outer Gear)(Aluminium Stator) 2009-Up | 2 |
| 510 | Part # 283510A | Pump Body W/Gears, RE7R01A (9 Threaded Bolt Holes)(5 7/8”OD) (.510”Thick Gears) 2008-Up | — |
| 520 | Part # 283520A | Stator, RE7R01A (10 Bolts To Case)(Aluminum)(8”Tall) (35 Splines On Shaft) (5 Clutch) 2008-Up | — |
| 530 | Part # 283530A | Pump Gear Set, RE7R01A Pump Body (.510”Thick)(15 Outer Teeth) (3.770”OD)(13 Inner Teeth) (Two Flats) 2008-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 283100A | Friction, RE7R01A 2-3-4-6 Brake Clutch (.059”Thick)(36 Teeth)(5.788”OD) 2008-Up | — |
| 101 | Part # 283101A | Friction, RE7R01A B1 Brake Clutch (36 Teeth)(.060”Thick)(7 5/16”OD) (6 3/16”ID) 2008-Up | — |
| 102 | Part # 283102A | Friction, RE7R01A C1 Input Clutch (40 Teeth)(6 3/8”OD)(.071”Thick) 2008-Up | — |
| 103 | Part # 283103A | Friction, RE7R01A C3 Low/Reverse Clutch (30 Teeth)(4.914”OD) (3.484”ID) (.064”Thick) 2008-Up | — |
| 104 | Part # 283104A | Friction, RE7R01A C2 Direct Clutch (24 Teeth)(6 1/4”OD)(.070”Thick) 2008-Up | — |
| 105 | Part # 283105A | Friction, RE7R01A B4 Reverse Brake Clutch (40 Teeth)(.063”Thick) (6 5/8”OD) 2008-Up | — |
| 106 | Part # 283106A | Friction, RE7R01A B2 Low Brake Clutch (36 Teeth)(4.573”OD)(.059”Thick) 2008-Up | — |
| 119 not on diagram | Part # 283119A | Friction Module, RE7R01A (V6) 2007-Up | — |
| 119 not on diagram | Part # 283119AHP | Friction Module, RE7R01A (V6) 2009-12 (GPZ) | — |
| 119 not on diagram | Part # 283119B | Friction Module, RE7R01A (V8) 2007-Up | — |
| 119 not on diagram | Part # 283119BAHP | Friction Module, RE7R01A/B (V8 Nismo Version) (GPZ) 2009-12 | — |
| 119 not on diagram | Part # 283119BHP | Friction Module, RE7R01A (V8) 2009-12 (GPZ) | — |
| 120 | Part # 283120A | Steel, RE7R01A B3 2-3-4-6 Clutch (30 Teeth)(.080”Thick)(6.068”OD)(4.564”ID) 2008-Up | — |
| 121 | Part # 283121AA | Steel, RE7R01A B1 Brake Clutch (11 Teeth)(8 1/4”OD)(6.545”ID) (.079”Thick) 2008-Up | — |
| 121 | Part # 283121AB | Steel, RE7R01A B1 Brake Clutch (11 Teeth)(8 1/4”OD)(6.545”ID) (.087”Thick) 2008-Up | — |
| 122 | Part # 283122A | Steel, RE7R01A C1 Input Clutch (24 Teeth)(5 3/4”ID)(.079”Thick) 2008-Up | — |
| 123 | Part # 283123A | Steel, RE7R01A C3 Low/Reverse Clutch (24 Teeth)(3.739”ID) (.095”Thick) 2008-Up | — |
| 124 | Part # 283124A | Steel, RE7R01A C2 Direct Clutch (24 Teeth)(5 9/16”ID) 2008-Up | — |
| 125 | Part # 283125A | Steel, RE7R01A B4 Reverse Brake Clutch (18 Teeth)(.063”Thick) (5 15/16”ID) 2008-Up | — |
| 126 | Part # 283126A | Steel, RE7R01A B2 Low Brake Clutch (16 Teeth)(4.892”ID) (.064”Thick) 2008-Up | — |
| 127 | Part # 283127A | Cushion, RE7R01A C2 Direct Clutch (6 5/16”OD)(5.520”ID) (.080”Thick)(Dished) 2008-Up | — |
| 131 | Part # 283131A | Apply Plate, RE7R01A B4 Reverse Brake Clutch (4 Teeth)(.049”Thick) (5 15/16”ID) 2008-Up | — |
| 135 | Part # 283135A | Cushion, RE7R01A C3 Low/Reverse Clutch (24 Teeth)(4.174”ID) (.055”Thick) (Slighty Cupped) 2008-Up | — |
| 139 not on diagram | Part # 283139A | Steel Module, RE7R01A (JR710E/JR711E) 2009-12 | — |
| 140 | Part # 283140A | Pressure Plate, RE7R01A B3 2-3-4-6 Clutch (Stepped)(15 Teeth) (.109”Thick At The Edge) 2008-Up | — |
| 142 | Part # 283142A | Pressure Plate, RE7R01A B1 Brake Clutch (11 Teeth)(.197”Thick) (8 3/16”OD) (6 1/2”ID) 2008-Up | — |
| 143 | Part # 283143A | Apply Plate, RE7R01A C1 Input Clutch (24 Teeth)(5 7/8”ID) (.060”Thick) 2008-Up | — |
| 144 | Part # 283144A | Pressure Plate, RE7R01A C1 Input Clutch (24 Teeth)(5 3/4”ID)(.164”Thick) 2008-Up | — |
| 146 | Part # 283146A | Pressure Plate, RE7R01A C3 Low/ Reverse Clutch (24 Teeth) (5.170”OD)(3.733”ID) (.172”Thick) 2008-Up | — |
| 148 | Part # 283148A | Pressure Plate, RE7R01A C2 Direct Clutch (24 Teeth)(6 9/16”OD) (5.528”ID) (.157”Thick) 2008-Up | — |
| 150 | Part # 283150AA | Pressure Plate, RE7R01A B4 Reverse Brake Clutch (18 Teeth)(5 15/16”ID) (.189”Thick) 2008-Up | — |
| 152 | Part # 283152A | Pressure Plate, RE7R01A B2 Low Brake Clutch (16 Teeth)(4.885”ID) (.164”Thick/.283”Thick) 2008-Up | — |
| 851 | Part # 283851A | Spacer Plate, RE7R01A B3 2-3- 4-6 Clutch (Bottom)(12 Fingers) (.105”Thick) (5.882”OD) 2008-Up | — |
| 854 | Part # 283854A | Cushion, RE7R01A B4 Reverse Brake (6 11/16”OD)(5 15/16”ID) (.095”Thick) (Dished) 2008-Up | — |
| 857 | Part # 283857A | Cushion, RE7R01A B2 Low Brake (5.877”OD)(4.917”ID)(.105”Thick)(Dished) 2008-Up | — |
| 961 | Part # 283961A | Piston, RE7R01A B1 Brake Clutch (8 Legs)(16 Spring Pockets) (7 1/2”OD)(6 1/2”ID) (1.585”Tall) 2008-Up | — |
| 962 | Part # 283962A | Piston, RE7R01A C1 Input Clutch (Cast # 31545 1XJOB) (18 Spring Pockets)(6 3/8”OD) (1.960”ID)(1.066”Thick) 2008-Up | 1 |
| 963 | Part # 283963A | Piston, RE7R01A C3 Clutch (Cast # 31515 3SXOA)(4.785”OD) (2.416”ID)(.978”Thick) (18 Spring Pockets)(Alumnium) 2008-Up | 1 |
| 964 | Part # 283964A | Piston, RE7R01A C2 Direct (Cast # 11601 55203)(20 Spring Pockets)(6.069”OD)(2.322”Tall) (Stepped ID w/ 2 D-ring… | 1 |
| 965 | Part # 283965A | Piston, RE7R01A B4 Reverse Brake (Cast # 31645 1XROA) (6 5/16”OD)(3.886”ID)(.928”Tall) (16 Castle Notches) (Alumnium)… | 1 |
| 966 | Part # 283966A | Piston, RE7R01A B2 Piston To Case (5.768”OD)(2.240”ID) (.900”Thk)(18 Spring Pockets) (Aluminum) 2008-Up | — |
| 970 | Part # 283970A | Spring Retainer, RE7R01A B3 2-3-4-6 Clutch (21 Springs)(3.892”OD)(2.420”ID)(.700”Tall) 2008-Up | — |
| 971 | Part # 283971A | Spring Retainer, RE7R01A B1 Brake Clutch (16 Sprags)(8 Slots) (7 11/16”OD)(6 7/16”ID) (.725”Tall) 2008-Up | — |
| 972 | Part # 283972A | Spring Retainer, RE7R01A C1 Input Clutch Assembly (18 Springs) (3.432”OD)(2.915”ID) (.850”Tall) 2008-Up | — |
| 973 | Part # 283973A | Return Spring, RE7R01A C3 Clutch Piston (18 Springs)(3.660”OD) (.784”Thk) 2008-Up | — |
| 974 | Part # 283974A | Spring Retainer, RE7R01A C2 Direct Clutch(20 Springs) (4.590”OD)(3.885”ID) (.960”Tall) 2008-Up | — |
| 975 | Part # 283975A | Return Spring, RE7R01A B4 Reverse Brake (.791”Tall) (5.584”OD)(5.158”ID) (.057”Thick) 2008-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 256 | Part # 283256A | Cup, RE7R01A C3 Clutch Hub To C3 Drum (2.433”OD)(1.894”ID) (.044”Thick/.128”Thick) 2008-Up | — |
| 443 | Part # 283443A | TECM Plate, RE7R01A (Early)(5 Bolts To Valve Body)(12 Or 13 Pin Case Connector)… | — |
| 443 | Part # 283443B | TECM Plate, RE7R01A (Late)(5 Bolts To Valve Body)(10 Pin Case Connector) 2008-Up | — |
| 459 | Part # 283459A | Solenoid Cover, RE7R01A Covers 3 Solenoids (4.292”Long)(Snaps On Valve Body) 2008-Up | — |
| 459 | Part # 283459B | Solenoid Cover, RE7R01A Covers 6 Solenoids (6 9/16”Long)(Snaps On Valve Body) 2008-Up | — |
| 552 | Part # 283552A | Drum, RE7R01A W/Input Shaft (12 3/4”Tall)(102 Right Angled Teeth Ring Gear)(24 Splines) (24 Holes On Top Of The Drum)… | — |
| 555 | Part # 283555A | Drum, RE7R01A C2 Direct Clutch (6 7/8”OD)(2.925”ID)(4.682”Tall)(40 Splines)(24 Teeth C2 Steels)(48 Round Holes) 2008-Up | — |
| 557 | Part # 283557A | Drum, RE7R01A C3 Low Reverse Clutch (5 Clutch)(1.750” ID) (3.135”Tall)(5.462”OD)(Aluminum)… | — |
| 573 | Part # 283573A | Hub, RE7R01A C3 Low Reverse Clutch (30 Outer Splines) (46 Inner Teeth)(3.660”OD)(1.814”ID) (.982”Thick) 2008-Up | — |
| 576 not on diagram | Part # 283576A | Hub, RE7R01A Low Brake B2 Clutch (36 Clutch Splines)(42 Inner Splines)(2.536”OD)(1.657”ID) (1.190”Tall) 2008-Up | — |
| 580 | Part # 283580A | Planet, RE7R01A P1 (3 Left Angled Gears)(18 Teeth On Each) (1.625”Tall) (Aluminum) 2008-Up | — |
| 582 | Part # 283582A | Planet, RE7R01A P2 (3 Left Angled Gears With 30 Teeth)(37 Lugs)(2.960”Tall) (Aluminum) 2008-Up | — |
| 584 | Part # 283584A | Planet, RE7R01A P3 (4 Right Angled Gears w/ 22 Teeth)(32 Splines)(Steel)(1.750”Tall) (Tin Oil Deflector Up Top) 2008-Up | — |
| 586 | Part # 283586A | Planet, RE7R01A P4 (5 Left Angled Gears W/ 24 Teeth) (19 Lugs On Top)(40 Outer Splines) (78 Inner Left Angled Teeth)… | — |
| 590 | Part # 283590A | Ring Gear, RE7R01A P1 Planet (34 Lugs)(Right Angled Gears With 78 Teeth)(.708”Thick) (5.359”OD) 2008-Up | — |
| 610 | Part # 283610A | Sun Gear, RE7R01A B1 Clutch Hub (3.884”Tall)(Clutch Hub .978”Tall)(Sun Gear .812”Tall)… | — |
| 614 not on diagram | Part # 283614A | Sun Gear, RE7R01A P3 W/Shaft (1 Groove)(34 Left Angled Teeth)(42 Splines) (9 11/16”Tall) 2008-Up | — |
| 616 | Part # 283616A | Sun Gear, RE7R01A P4 Clutch Hub (24 Legs)(62 Right Angled Teeth)(1.354”Tall) (Cast# 50924AN264) 2008-Up | 1 |
| 622 | Part # 283622A | Shell, RE7R01A P2 Planet To P4 Planet (5 1/2”Tall) (7 3/16”OD) (110 Right Angled Ring Gear Teeth) 2008-Up | — |
| 634 | Part # 283634A | Support, RE7R01A B2 Low Brake (Cast # 15J05872A) (6 15/16”OD)(18 Lugs)(4 Check Balls) (2.435”Tall) 2008-Up | 1 |
| 650 | Part # 283650A | Sprag, RE7R01A F1 (11 Outer Lugs) (15 Rollers)(.555”Thick) 2008-Up | — |
| 652 | Part # 283652A | Sprag, RE7R01A F2 (22 Rollers)(2.598”OD)(1.948”ID) (.842”Thick) 2008-Up | — |
| 678 | Part # 283678A | Shaft, RE7R01A Output (4x4)(15 15/16”Long)(3 Sets Of Splines)(Pilot .905”OD) 2008-Up | — |
| 690 | Part # 283690A | Park Gear, RE7R01A (20 Lugs)(36 Inner Splines) (6 Windows)(5.113”OD)(1.086”Tall) 2008-Up | — |
| 750 | Part # 283750A | Bell Housing, RE7R01A (Starter At 12 O’Clock)(Cast # 1XR2F) (10 Bolts To The Case) (9 Bolts To Engine)(6 1/8 Tall)… | 1 |
| 760 | Part # 283760A | Case, RE7R01A (Cast # MGC)(24 Pan Bolts)(18 1/4”Long) (2 Linkage Seals) (10 Bolts To Bell)(12 Bolts To Tail Hsg)… | — |
| 770 | Part # 283770A | Tail Housing, RE7R01A (Cast # 1XROC)(5 3/4”Long) (12 Bolt Holes To The Case) (2 Threaded Mount Bolt Holes)… | 1 |
| 995 not on diagram | Part # 283995A | Park Pawl Assembly, RE7R01A… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 400 not on diagram | Part # 283400A | Technical Guide, RE7R01A 2009-Up (ATSG) | — |
| 492 | Part # 283492A | Plug, RE7R01A (19mm)(Hex Head)(.657”Long) 2008-Up | — |
| 494 not on diagram | Part # 283494A | Fill Plug, RE7R01A (5mm)(Torx Head)(.560”Long) (Screws Into Pan) 2008-Up | — |
| 494 not on diagram | Part # 283494P-1 | Plug, RE7R01A Dip Stick Hole (1 Bolt Metal) 2008-Up | — |
| 638 not on diagram | Part # 283638B | Anti Rattle Clip, RE7R01A B4 Low Brake (1.280”Long)(.033”Wire Thick) 2008-Up | — |
| 652 | Part # 283652A-1 | End Cap, RE7R01A F2 Sprag (2.597”OD)(1.947”ID)(.117”Thick) (Brass) 2008-Up | — |
| 839 | Part # 283839A | Pan Magnet, RE7R01A (1.534”OD) (.878”ID)(.279”Thick) 2008-Up | — |
| 843 | Part # 283843A | Clip, RE7R01A Case Connector To Case (1.310”Long)(.047”Wire Diameter 2008-Up | — |
| 843 | Part # 283843B | Bracket, RE7R01A (2 Bolts To Valve Body)(Guide Pin To Postion Case Connector)(2.620”Long) (1.865” At Tallest) 2008-Up | — |
| 860 | Part # 283860AA | Snap Ring, RE7R01A B3 2-3-4-6 Clutch To Drum (6 5/16”OD)(.079”Thick) 2008-Up | — |
| 861 not on diagram | Part # 283861A | Snap Ring, RE7R01A B1 Brake Clutch (8 9/16”OD)(.078”Thick) 2008-Up | — |
| 862 | Part # 283862A | Snap Ring, RE7R01A B3 2-3-4-6 Clu Spring Retainer (2.515”OD)(.144”Thick) 2008-Up | — |
| 865 | Part # 283865A | Snap Ring, RE7R01A B1 Brake Clutch Piston Kit (.120”Wide)(6 7/16”OD)(6 3/16”ID) 2008-Up | — |
| 867 | Part # 283867A | Snap Ring, RE7R01A P1 Planet To Inner Race (5.398”OD) (.038”Thick) 2008-Up | — |
| 869 | Part # 283869A | Snap Ring, RE7R01A C1 Input Clutch (Top)(6 3/4”OD)(6 5/16”ID)(.080”Thick) 2008-Up | — |
| 873 | Part # 283873A | Snap Ring, RE7R01A C3 Low/Reverse (Top)(5.338”OD)(.078”Thick) (.200”Wide) 2008-Up | — |
| 874 | Part # 283874A | Snap Ring, RE7R01A C3 Clutch Piston (2.486”OD)(.055”Thick)(.145”Wide) 2008-Up | — |
| 875 | Part # 283875A | Snap Ring, RE7R01A C2 Direct Drum To P4 Planet (6 3/4”OD)(6 5/16”ID) (.102”Thick) 2008-Up | — |
| 876 | Part # 283876A | Snap Ring, RE7R01A C2 Direct Drum To P4 Planet (6 3/4”OD) (6 5/16”ID) (.079”Thick) 2008-Up | — |
| 877 | Part # 283877A | Snap Ring, RE7R01A C2 Direct Clutch Retainer (3.253”OD) (3.445”ID) (.064”Thick) 2008-Up | — |
| 878 | Part # 283878A | Snap Ring, RE7R01A B4 Reverse Brake (Top)(7 1/8”OD) (6 3/4”ID)(.079”Thick) 2008-Up | — |
| 879 | Part # 283879A | Snap Ring, RE7R01A B4 Reverse Brake Piston Kit (7 3/16”OD) (6 3/4”ID) (.047”Thick) 2008-Up | — |
| 881 | Part # 283881A | Snap Ring, RE7R01A C3 Clutch Hub To Sun Gear Shaft (1.945”OD) (1.660”ID) (.078”Thick) 2008-Up | — |
| 882 | Part # 283882A | Snap Ring, RE7R01A P1 Ring Gear To P2 Planet (5.485”OD) (.064”Thick) 2008-Up | — |
| 883 | Part # 283883A | Snap Ring, RE7R01A B2 Support To Case (7 1/4”OD) (6 3/4”ID)(.142”Thick) 2008-Up | — |
| 885 | Part # 283885A | Snap Ring, RE7R01A B2 Brake Clutch (Top)(6 1/4”OD)(5 7/8”ID) (.071”Thk) 2008-Up | — |
| 887 | Part # 283887A | Snap Ring, RE7R01A B2 Retainer To Case (2.305”OD)(.090”Thk) 2008-Up | — |
| 888 | Part # 283888A | Snap ring, RE7R01A P2 Planet To Shell (7 1/8”OD)(.080”Thk) 2008-Up | — |
| 890 | Part # 283890A | Snap Ring, RE7R01A Holds Sprag In Sungear (2.798”OD) (2.489”ID)(.040”Thk) 2008-Up | — |
| 976 | Part # 283976A | Spring Retainer, RE7R01A B2 Piston To Case (4.192”OD) (2.168”ID)(.698”Thick) (18 Springs) 2008-Up | — |
| 982 | Part # 283982A | Retainer, RE7R01A C1 Drum +(Bonded)(4.260”OD) (1.895”ID)(.162”Thick) 2008-Up | — |
| 982 | Part # 283982AHP | Retainer, RE7R01A Balance Input Clutch Return Spring (Hi-Per Blue) | — |
| 983 | Part # 283983AHP | Retainer, RE7R01A Balance High Low/ Reverse Clutch Return Spring (Hi-Per Blue) | — |
| 984 | Part # 283984A | Retainer, RE7R01A C2 Direct Clutch (Bonded)(5.010”OD) (3.158”ID)(.180”Thick) 2008-Up | — |
| 985 | Part # 283985A | Retainer, RE7R01A B4 Reverse Brake (6 11/16”OD)(5.093”ID) (.422”Tall)(.080”Thick) (16 Slots) 2008-Up | — |
| 991 | Part # 283991-2A | Detent Spring, RE7R01A Linkage (5.475”Long)(.036”Thick) (.196”Roller OD) (.713”Wide Roller) 2008-Up | — |
| 991 | Part # 283991-4A | Linkage Rod, RE7R01A (11 5/8”Long)(.436”OD)(1 Hole) (Threaded On One End) 2008-Up | — |
| 991 | Part # 283991-5A | Pin, RE7R01A Linkage (Hollow)(1.002”Long)(.162”OD) 2008-Up | — |
| 994 | Part # 283994A | Park Rod, RE7R01A (6 7/16”Long)(.712”OD Ball) (.240”OD Rod)(3 Bends) 2008-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.