BMXA / A4RA / B4RA parts diagram
Same diagram:
A4RA, B46A, B4RA, BDRA
Transmission page:
Positions:
153 total, 76 on the diagram
Parts:
459 total, 116 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 90000A | Paper & Rubber Kit, S5 / MPSA (Civic AWD) 1989-91 | — |
| 000 not on diagram | Part # 90000D | Paper & Rubber Kit, S24A / A24A / M24A (Civic, Del Sol) 1992-97… | — |
| 000 not on diagram | Part # 90000H | Paper & Rubber Kit, M4TA / MDLA / MDMA / MP7A / SP7A / S4XA (With All Wheel Drive Parts) 1994-01 | — |
| 000 not on diagram | Part # 90000M | Paper & Rubber Kit, BMXA / SLXA / (Civic) 2001-Up | — |
| 002 not on diagram | Part # 90002A | Overhaul Kit, S5 / MPSA (Civic AWD) 1989-91 | — |
| 002 not on diagram | Part # 90002D | Overhaul Kit, A2YA/A24A/M24A/S24A 1992-95 | — |
| 002 not on diagram | Part # 90002H | Overhaul Kit, MDMA/M4TA/MDLA/SDMA 1997-On | — |
| 002 not on diagram | Part # 90002HA | Overhaul Kit, M4TA/MDLA/MDMA/SDMA 1997-01 | — |
| 002 not on diagram | Part # 90002M | Overhaul Kit, BMXA/SLXA (Civic) 2001-Up (Also Fits A4RA/S24A/B4RA/B46A/M4RA/ BDRA/S4RA) | — |
| 002 not on diagram | Part # 90002N | Overhaul Kit, BCLA/BZKA/BZNA/GPLA/GPPA/MCLA/MCTA/MCVA/MKYA/MKZA/MRMA/MRVA/ MZHA/MZJA/MZKA/MZNA… | — |
| 004 not on diagram | Part # 90004A | Master L/Steels Kit, S5 / MPSA (Civic AWD) 1989-91 | — |
| 004 not on diagram | Part # 90004C | Master L/Steels Kit, P24 / A2YA / A24A / M24A / S24A (Civic, Del Sol) 1992-97 | — |
| 004 not on diagram | Part # 90004D | Master L/Steels Kit, A4RA / B4RA / B46A / BDRA / S4RA / M4RA (Civic, Del Sol) 1996-Up | — |
| 004 not on diagram | Part # 90004H | Master L/Steels Kit, M4TA / MDLA / MDMA / MP7A / SP7A / S4XA / SDMA / SKWA (With All Wheel Drive Parts) 1994-01 | — |
| 004 not on diagram | Part # 90004M | Master L/Steels Kit, BMXA / SLXA (Civic) 2001-Up | — |
| 004 not on diagram | Part # 90004N | Master L/Steels Kit, MCVA/MRVA 2002-04, BZKA/MZKA 2003-05 (For Bonded Retainers Sell 2 Pieces Of 90980N) | — |
| 006 not on diagram | Part # 90006A | Master W/Steels Kit, S5 / MPSA (Civic AWD) 1989-91 | — |
| 006 not on diagram | Part # 90006C | Master W/Steels Kit, P24 / A2YA / A24A / M24A / S24A (Civic, Del Sol) 1992-97 | — |
| 006 not on diagram | Part # 90006D | Master W/Steels Kit, A4RA / B4RA / B46A / BDRA / S4RA (Civic, Del Sol) 1996-Up (USA / Canada Built) | — |
| 006 not on diagram | Part # 90006H | Master W/Steels Kit, M4TA / MDLA / MDMA / MP7A / SP7A / S4XA / SKWA (With All Wheel Drive Parts) 1994-01 | — |
| 006 not on diagram | Part # 90006M | Master W/Steels Kit, BMXA / SLXA (Civic) 2001-Up | — |
| 006 not on diagram | Part # 90006N | Master W/Steels Kit, MCVA/MRVA 2002-04, BZKA/MZKA 2003-05 (For Bonded Retainers Sell 2 Pieces Of 90980N) | — |
| 030 not on diagram | Part # 90030B | Bushing Kit, S24A/A24A/M24A/P24/M4TA/SDMA (4 Pieces) | — |
| 564 not on diagram | Part # 90564B | Piston Kit, S24A / A24A / M4TA Low/Hold Clutch (Secondary Shaft) | — |
| 776 not on diagram | Part # 90776BK | Bolt Set, S24A / A24A / M24A Case To Bell (18 Pieces) | — |
| 776 not on diagram | Part # 90776DK | Bolt Set, A4RA / B4RA / MDLA Case To Bell (18 Pieces) | — |
| 776 not on diagram | Part # 90776EK | Bolt Set, M4TA Case To Bell (19 Pieces) | — |
| 776 not on diagram | Part # 90776HK | Bolt Set, SP7A / MP7A / S4XA / BMXA Case To Bell (18 Pieces) | — |
| 782 not on diagram | Part # 90782BK | Bolt Set, S24A / A24A / M24A / SP7A / MP7A / S4XA Valve Body To Bell (4 Pieces) | — |
| 782 not on diagram | Part # 90782DK | Bolt Set, A4RA / M4TA / B4RA / MDLA / BMXA Valve Body To Bell (5 Pieces) | — |
| 784 not on diagram | Part # 90784BK | Bolt Set, S24A / A24A / M24A Holds Servo Assembly To Valve Body | — |
| 784 not on diagram | Part # 90784DK | Bolt Set, A4RA / M4TA Holds Servo To Valve Body | — |
| 784 not on diagram | Part # 90784FK | Bolt Set, B4RA / BMXA Holds Servo To Valve Body | — |
| 784 not on diagram | Part # 90784HK | Bolt Set, SP7A / MP7A / S4XA Holds Servo To Valve Body (11 Pieces) | — |
| 786 | Part # 90786BK | Bolt Set, S24A / A24A / M24A / SP7A / MP7A / S4XA Regulator To Valve Body (8 Pieces) | — |
| 786 | Part # 90786DK | Bolt Set, A4RA / M4TA / B4RA / BMXA Regulator To Valve Body (8 Pieces) | — |
| 999 | Part # 90999B | Tube Set, S24A / A24A / M24A (6 Tubes) | — |
| 999 | Part # 90999D | Tube Set, A4RA / B4RA (8 Tubes) | — |
| 999 | Part # 90999E | Tube Set, M4TA (10 Tubes) | — |
| 999 | Part # 90999H | Tube Set, SP7A / MP7A / S4XA (6 Tubes) | — |
| 999 | Part # 90999J | Tube Set, MDLA (6 Tubes) | — |
| 999 | Part # 90999M | Tube Set, BMXA (8 Tubes) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 not on diagram | Part # 90529B | Converter Reactor, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA (Stator)… | 3 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 not on diagram | Part # 90421M | Solenoid, BMXA Shift (On The Outside Rear Of Case) (Dual With Wire Harness With 2 Prong Connector) 2001-05 | — |
| 423 | Part # 90423D | Solenoid, A4RA/B4RA/M4TA/MDLA/MDMA Linear (Single With 4 Bolt Mounting Block) 1996-01 | — |
| 423 | Part # 90423M | Solenoid, BMXA/SLXA Linear (Dual With Mounting Block) 2001-05 | — |
| 423 | Part # 90423N | Solenoid, MCVA/MRVA Linear (Single W/4 Bolt Mounting Block) 2002-04 | — |
| 425 | Part # 90425B | Solenoid Assembly, A24A / S24A / A4RA / M4TA / B4RA / M24A / B46A / MDLA / MP7A / SP7A / A2YA / M4RA / M4VA / MDMA… | 1 |
| 425 | Part # 90425D | Solenoid Assembly, A4RA / B4RA / M4RA / M4TA / B46A / M4VA / MDLA / MDMA / SDMA Shift (Has 5 1/2” Wire Harness)… | 1 |
| 425 | Part # 90425H | Solenoid Assembly, MP7A / SP7A / S4XA Shift 1994-97 (Has 18” Wire Harness) (On Outside Of Case) (3 Bolt) (Dual… | 1 |
| 425 | Part # 90425M | Solenoid, BMXA On Bell Housing (Single) (Use 30422B) | — |
| 453 not on diagram | Part # 90453N | Solenoid, BCLA/GPLA/GPPA/MCVA/MKYA/MKZA/MRVA Servo A (Internal) 2002-Up | — |
| 454 not on diagram | Part # 90454N | Solenoid, BCLA/GPLA/GPPA/MCVA/MKYA/MKZA/MRVA/MZKA Servo B (Internal) 2002-Up | — |
| 680 not on diagram | Part # 90680B | Governor Assembly, S24A / A24A / M24A / (Cast # P24) (17 Teeth) | 1 |
| 740 | Part # 90740B | Valve Body, S24A/ M24A (Cast # P24) Less Pump Gears | 1 |
| 740 | Part # 90740C | Valve Body, A24A (Cast # P24Y) Less Pump Gears | 1 |
| 740 | Part # 90740D | Valve Body, A4RA / M4TA / B4RA (Cast # P4R1 or P4R2) Less Pump Gears | 2 |
| 740 | Part # 90740H | Valve Body, SP7A / MP7A / S4XA (Cast # HM-1, P56, Or E-2) Less Pump Gears | 2 |
| 740 | Part # 90740J | Valve Body, MDLA (Cast # PDMX) Less Pump Gears | — |
| 740 | Part # 90740M | Valve Body, BMXA (Cast # PLX2) Less Pump Gears | 1 |
| 740 | Part # 90740MA | Valve Body, BMXA (Cast # PLX1 or PLX3) (Less Pump Gears) | 2 |
| 741 | Part # 90741B-5 | Check Ball, S24A /A24A / A4RA / M4TA / B4RA / M24A Valve Body (.210”OD) Steel | — |
| 747 | Part # 90747B | Seperator Plate, S24A / A24A / M24A Valve Body | — |
| 747 | Part # 90747D | Seperator Plate, A4RA / B4RA Valve Body | — |
| 747 | Part # 90747E | Seperator Plate, M4TA Valve Body | — |
| 747 | Part # 90747H | Seperator Plate, SP7A / MP7A / S4XA (Valve Body) | — |
| 747 | Part # 90747J | Seperator Plate, MDLA Valve Body | — |
| 747 | Part # 90747L | Seperator Plate, MDMA Valve Body | — |
| 747 | Part # 90747M | Seperator Plate, BMXA Valve Body | — |
| 924 not on diagram | Part # 90924B | Regulator, S24A / A24A / M24A / SP7A / MP7A / S4XA (2 Valves In Top Section Are Held In By Roll Pins) Some Have No Cast… | 1 |
| 924 not on diagram | Part # 90924D | Regulator, A4RA / M4TA / B4RA / MDLA / BMXA (Cast # P4R) 1 Valve In Top Section Is Held In By A Roll Pin… | 1 |
| 940 not on diagram | Part # 90940B | Accumulator Assembly, S24A / A24A / M24A / SP7A / MP7A / S4XA Low/Hold (In Rear Cover) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 not on diagram | Part # 80410D | Switch, MDLA/ M4TA Neutral Safety (On Rear Cover) | — |
| 410 not on diagram | Part # 90410L | Switch, MDMA Neutral Safety (2 Bolt)(9 Pin Connector With Wire Harness) | — |
| 410 not on diagram | Part # 90410M | Switch, BMXA Neutral Safety (2 Bolt, 10 Pin Connector) | — |
| 436 | Part # 90436D | Sensor, A4RA/B4RA/M4TA/MDLA/SDMA/BMXA (Plastic)(2 Wire Connector)(3 3/4” Long, Straight) (1 Bolt) On Top Side Of Case | — |
| 436 | Part # 90436H | Sensor, SP7A/MP7A/S4XA Output (1 Bolt, 2 Wire, 8” Long Harness, 3/4” Wide Connector) | — |
| 436 | Part # 90436HA | Sensor, SP7A/MP7A/S4XA Output (1 Bolt, 2 Wire, 8” Long Harness, 1” Wide Connector) | — |
| 438 | Part # 90438D | Sensor, A4RA / BMXA / B4RA / MDLA / MDMA / M4RA / SLXA (Plastic)(2 Prong Connector) (1 3/4” Long) (1 Bolt) On Top Of… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 60010Y | Filter, L5/PLX 1987-90 | 1 |
| 010 | Part # 90010B | Filter, S24A / A24A / M24A / P24 / A2YA (Flat) (6” x 1 15/16”) | — |
| 010 | Part # 90010D | Filter, (A4RA/BMXA/B4RA/MDMA/SLXA Some) / MDLA (Canister) (6 3/4” Long With Tubes) 1 Hole Bracket Is 1 1/4” From End | — |
| 010 | Part # 90010E | Filter, (A4RA/B4RA/MDMA/SDMA Some) / M4TA (Canister) (6 3/4” Long With Tube) 2 Hole Bracket Is 5/8” From End… | — |
| 010 | Part # 90010N | Filter, MCVA / MRVA / BZKA / MZKA (CRV 2002-04) (Element 2003-04) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 not on diagram | Part # 60070A | Seal, A24A / M24A / S24A / MDLA / M4TA / MP7A / SP7A / S4XA / A4RA / B4RA / BMXA Converter (44 x 68 x 8mm) Counter… | 2 |
| 070 not on diagram | Part # 90070A | Seal, S5 / MPSA / P24 / A2YA (Civic, Del Sol) Converter 1989-97 | 1 |
| 072 | Part # 60072 | Seal, A24A / M24A / S24A / MDLA / M4TA / MP7A / SP7A / S4XA / A4RA / B4RA / BMXA Manual Shaft | 3 |
| 076 | Part # 60076G | Seal, P1 Axle (Case Side) (40x76x9mm) | 1 |
| 076 | Part # 60076L | Seal, L4 Axle (Case Side) (35x76x9mm) | 1 |
| 076 | Part # 90076A | Seal, S5 / MPSA (Civic All Wheel Drive) Axle (Bell Housing Side) (38 x 54 x 8mm) 1989-91 | 1 |
| 076 | Part # 90076C | Seal, P24 / A2YA (Civic, Del Sol) Axle (Bell Housing Side) (35 x 56 x 8mm) 1992-97 (Use 60077C) | 1 |
| 077 | Part # 60077AA | Seal, AK/AS/CA Axle (Bell Housing Side) (35x76x9mm) | 1 |
| 077 | Part # 60077H | Seal, A24A / M24A / S24A / MDLA / M4TA / MP7A / SP7A / S4XA / A4RA / B4RA / BMXA Axle (Bell Housing Side)… | 2 |
| 077 | Part # 90077A | Seal, S5 / MPSA (Civic All Wheel Drive) Axle (Bell Housing Side) (40 x 76 x 9mm) 1989-91 (Use 60076G) | 1 |
| 077 | Part # 90077C | Seal, P24 / A2YA (Civic, Del Sol) Axle (Case Side) (35 x 76 x 9mm) 1992-97 (Use 60076L) | 1 |
| 305 | Part # 90305M | Gasket, BMXA/SLXA Rear Cover (Side Cover) 2001-Up | — |
| 313 not on diagram | Part # 60313A | O-Ring, Honda Converter (OE Upgraded)(Fits On Converter Hub, Inside Of Drive Pump Gear) | 1 |
| 318 | Part # 90318M | Gasket, BMXA/SLXA Bell Housing To Case 2001-Up | — |
| 379 not on diagram | Part # 90379E | Seal, A4RA / B4RA / MDMA / M4TA / MP7A / SP7A / S4XA Filter | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 206 not on diagram | Part # 90206E | Washer, M4TA / SP7A / MP7A / S4XA Under Secondary Shaft Nut (1.120”OD) (Also SP7A / MP7A Mainshaft Nut) | — |
| 207 not on diagram | Part # 90207H | Replaced by 90206E | — |
| 209 not on diagram | Part # 60209A | Caged Needle Bearing, AK/AS/CA/L4/P1 Converter Reactor (Front) | — |
| 211 not on diagram | Part # 60211A | Ball Bearing, AK/AS/F4/K4/CA/L4/P1/G4/L5/PL5X Bell Housing (2.675”OD) (1.570”ID) | — |
| 214 not on diagram | Part # 90214B | Caged Needle Bearing, S24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA Converter Reactor To… | — |
| 214 not on diagram | Part # 90214C | Caged Needle Bearing, A24A Converter Reactor To Mainshaft (Rear) (.695” Thick) | — |
| 217 not on diagram | Part # 60217A | Thrust Bearing, AK/AS/F4/K4/CA/L4/P1/G4 Second Gear To Mainshaft | 1 |
| 220 not on diagram | Part # 60220D | Caged Needle Bearing, CA/L4/P1 Second Gear To Mainshaft | 1 |
| 223 not on diagram | Part # 60223A | Thrust Bearing, AK/AS/F4/CA/L4/P1 Second Gear To Mainshaft (2.035”OD) Fits F4 With Thin Hub 2-4 Drum | 1 |
| 223 not on diagram | Part # 60223E | Bearing, BAYA/BGFA/BVGA-5/BVGA-6/BVGA-7/BYBA/B7TA/ B7VA/B7WA/MFYA/MGFA/ MGHA/MGSA/M7WA 2nd Gear (Secondary Shaft) # 253… | 1 |
| 223 not on diagram | Part # 60223EB | Washer, A4RA / M4TA / B4RA / MDLA / BMXA / SP7A / MP7A / S4XA 2nd Gear To Mainshaft (Bronze Replacement) (Sonnax) | — |
| 223 not on diagram | Part # S60223AB | Thrust Washer, AK/AS/F4/CA/L4/P1 Second Gear To Drum (Bronze Replacement) (Sonnax) | 1 |
| 226 not on diagram | Part # 60226A01 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.117”) | 1 |
| 226 not on diagram | Part # 60226A02 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.119”) | 1 |
| 226 not on diagram | Part # 60226A03 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.121”) | 1 |
| 226 not on diagram | Part # 60226A04 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.123”) | 1 |
| 226 not on diagram | Part # 60226A05 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.125”) | 1 |
| 226 not on diagram | Part # 60226A06 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.127”) | 1 |
| 226 not on diagram | Part # 60226A07 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.129”) | 1 |
| 226 not on diagram | Part # 60226A08 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.131”) | 1 |
| 226 not on diagram | Part # 60226A09 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.135”) | 1 |
| 226 not on diagram | Part # 60226A10 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.137”) | 1 |
| 226 not on diagram | Part # 60226A11 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.139”) | 1 |
| 226 not on diagram | Part # 60226A12 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.141”) | 1 |
| 226 not on diagram | Part # 60226A13 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.143”) | 1 |
| 226 not on diagram | Part # 60226A14 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.145”) | 1 |
| 226 not on diagram | Part # 60226A15 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.147”) | 1 |
| 226 not on diagram | Part # 60226A16 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.149”) | 1 |
| 226 not on diagram | Part # 60226A17 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.151”) | 1 |
| 226 not on diagram | Part # 60226A18 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.153”) | 1 |
| 226 not on diagram | Part # 60226A19 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.155”) | 1 |
| 226 not on diagram | Part # 60226A20 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.157”) | 1 |
| 226 not on diagram | Part # 60226A21 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.159”) | 1 |
| 226 not on diagram | Part # 60226A22 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.161”) | 1 |
| 226 not on diagram | Part # 60226A23 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.163”) | 1 |
| 226 not on diagram | Part # 60226A24 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.165”) | 1 |
| 226 not on diagram | Part # 60226A25 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.167”) | 1 |
| 226 not on diagram | Part # 60226A26 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.169”) | 1 |
| 226 not on diagram | Part # 60226A27 | Race, AK/AS/F4/CA/L4/P1 Second Gear To Drum (2.010”OD) (.171”) | 1 |
| 226 not on diagram | Part # 60226C1 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.155”) | 1 |
| 226 not on diagram | Part # 60226C2 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.157”) | 1 |
| 226 not on diagram | Part # 60226C3 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.159”) | 1 |
| 226 not on diagram | Part # 60226C4 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.161”) | 1 |
| 226 not on diagram | Part # 60226C5 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.163”) | 1 |
| 226 not on diagram | Part # 60226C6 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.165”) | 1 |
| 226 not on diagram | Part # 60226C7 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.167”) | 1 |
| 226 not on diagram | Part # 60226C8 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.169”) | 1 |
| 226 not on diagram | Part # 60226C9 | Race, F4/K4/G4/L5/PL5X Second Gear To Drum (2.160”OD) (.171”) | 1 |
| 229 not on diagram | Part # 90229B | Race, S24A / A24A / M4TA / M24A 4th Gear (Mainshaft) To Drum (2.075”OD) 1.032”ID (.176” Thick) With 2 Notches On ID | — |
| 232 | Part # 60232E | Thrust Bearing, K4/G4 (Some) 2-4 Drum To 4th Gear (2.112”OD) (.097”)… | 1 |
| 232 | Part # 90232B | Bearing, RO / MPRA 2nd Gear To 2nd Drive Gear (Secondary Shaft) (Also RO/MPRA 2nd Drive Gear to Secondary Shaft) | — |
| 236 | Part # 90236B | Caged Needle Bearing, RO 2nd Drive Gear To Secondary Shaft (1.770” Thick) (22 Rollers) (Also RO/MPRA 4th Gear… | — |
| 238 | Part # 90238B | Thrust Bearing, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA 4th Gear (Rear) (Mainshaft) (1.725”OD) (1.265”ID)… | — |
| 238 | Part # 90238D | Thrust Bearing, A4RA / B4RA 4th Gear To Snap Ring (Mainshaft) (1.753”OD) (1.265”ID) (.078” Thick)(Also Fits BMXA) | — |
| 239 | Part # 90239B | Race, S24A / A24A / M4TA / M24A / SP7A / MP7A 4th Gear (Rear) (Mainshaft) (1.765”OD) (1.033”ID) (.137” Thick) | — |
| 239 | Part # 90239D | Race, A4RA / B4RA / MDLA / BMXA / S4XA 4th Gear (Rear) (Mainshaft) (1.760”OD) (1.035”ID) (.177” Thick) | — |
| 241 | Part # 90241B | Roller Bearing, S24A / A24A / M4TA / M24A / MDLA / BMXA / MP7A / SP7A / S4XA Mainshaft To Case (2.952”OD) (Use 60274CA) | — |
| 244 not on diagram | Part # 90244B | Washer, RO / MPRA Collar To 1st Gear (Mainshaft) | — |
| 247 | Part # 90247B | Caged Needle Bearing, S24A / A24A / A4RA / M4TA / B4RA / M24A / BMXA / SP7A / MP7A / S4XA 1st Gear To 2st Clutch Drum… | — |
| 248 not on diagram | Part # 90248B | Caged Needle Bearing, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Case To Secondary Shaft | — |
| 249 not on diagram | Part # 90249B | Thrust Bearing, S24A / A24A / M4TA / M24A / MDLA 4th Gear To Collar (Secondary Shaft) | — |
| 250 not on diagram | Part # 90250B | Caged Needle Bearing, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA 4th Gear To Collar (Secondary Shaft)… | — |
| 251 | Part # 90251B | Thrust Bearing, RO / MPRA 1st Gear To Low Drum (Mainshaft) | — |
| 252 | Part # 90252B | Race, S24A / A24A / M24A 1st Gear To 1st Clutch Drum (Mainshaft) (1.825”OD) (1.030”ID) (.136” Thick) | — |
| 252 | Part # 90252D | Race, A4RA / M4TA / B4RA / MDLA / BMXA / SP7A / MP7A / S4XA 1st Gear To 1st Clutch Drum (Mainshaft) (1.825:OD)… | — |
| 253 not on diagram | Part # 90253B | Thrust Bearing, S24A / A24A / M4TA / M24A / MDLA 4th Gear To Low Hold Drum (Secondary Shaft) (1.685”OD) (1.108”OD)… | — |
| 254 not on diagram | Part # 90254A | Caged Roller Bearing, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA Bell Housing To… | — |
| 255 not on diagram | Part # 90255B | Ball Bearing, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Case To Secondary Shaft (2.440”OD) (.860”ID)… | — |
| 256 not on diagram | Part # 60256C1 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.118”) | 1 |
| 256 not on diagram | Part # 60256C2 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.119”) | 1 |
| 256 not on diagram | Part # 60256C3 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.120”) | 1 |
| 256 not on diagram | Part # 60256C4 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.121”) | 1 |
| 256 not on diagram | Part # 60256C5 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.122”) | 1 |
| 256 not on diagram | Part # 60256C6 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.123”) | 1 |
| 256 not on diagram | Part # 60256C7 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.124”) | 1 |
| 256 not on diagram | Part # 60256C8 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.125”) | 1 |
| 256 not on diagram | Part # 60256C9 | Race, F4/K4 3rd Gear (Countershaft) To 3rd Clutch Drum (.126”) | 1 |
| 256 not on diagram | Part # 90256D2 | Race, A4RA / M4TA / B4RA / MDLA 3rd Gear (Countershaft) To Drum (.176”) (26 Inner Splines) (Also Fits BMXA/S4XA) | — |
| 256 not on diagram | Part # 90256D9 | Race, A4RA / M4TA / B4RA / MDLA 3rd Gear (Countershaft) To Drum (.196”) (26 Inner Splines) (Also Fits BMXA/S4XA) | — |
| 256 not on diagram | Part # 90256H | Top Hat Race, SP7A/MP7A 3rd Gear (Countershaft) To 3rd Clutch Drum | — |
| 257 | Part # 90257A | Thrust Bearing, S24A / A24A / M24A 3rd Gear To 3rd Clutch Drum (Countershaft) (Use 60232E) | — |
| 257 | Part # 90257D | Thrust Bearing, AR4A / M4TA / BR4A / BMXA / S4XA 3rd Gear To 3rd Clutch Drum ( Countershaft) (Use 90263D) | — |
| 257 | Part # 90257H | Thrust Bearing, SP7A / MP7A 3rd Gear To 3rd Clutch Drum (Countershaft) (Use 60217A) | — |
| 258 not on diagram | Part # 90258B | Race, S24A / A24A / M4TA / M24A / SP7A / MP7A / S4XA 4th Gear To Low/Hold Drum (Secondary Shaft) (1.665”OD) (.912”ID)… | — |
| 260 | Part # 90260B | Caged Needle Bearing, S24A / A24A / M24A 3rd Gear To Countershaft (1.460”OD) (.930” Wide) | — |
| 260 | Part # 90260D | Caged Needle Bearing, A4RA / M4TA / B4RA / MDLA / BMXA / SP7A / MP7A / S4XA 3rd Gear To Countershaft (1.580”OD)… | — |
| 260 | Part # 90260DA | Sleeve Race, A4RA / M4TA / B4RA / BMXA / S4XA 3rd Gear To Countershaft (1.425”OD) (1.220”ID) (.814” Wide)… | — |
| 263 | Part # 90263D | Thrust Bearing, A4RA / M4TA / B4RA / MDLA 3rd Gear (Countershaft) To 2nd Gear (2.155”OD) (1.638”ID) (.078” Thick)… | — |
| 263 | Part # 90263H | Thrust Bearing, SP7A / MP7A 3rd Gear To 2nd Gear (Countershaft) (Use 60217A) | — |
| 268 | Part # 90268B | Caged Needle Bearing, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA 4th Gear To… | — |
| 271 | Part # 90271B | Caged Needle Bearing, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA Reverse Gear… | — |
| 274 | Part # 60274C | Ball Bearing, (Some F4/K4) Countershaft To Case (2.670”OD) | — |
| 274 | Part # 60274CA | Ball Bearing, F4/K4/L5/G4 Countershaft To Case (2.952”OD) (Also Fits F4/K4/G4/L5 Mainshaft To Case) | — |
| 279 not on diagram | Part # 90279B | Caged Needle Bearing, RO / MPRA Low Gear (Countershaft) (Also RO / MPRA Reverse Gear (Countershaft) | — |
| 283 | Part # 80283 | Caged Needle Bearing, MPYA / M5DA Reverse Idler (14 Rollers) | — |
| 295 not on diagram | Part # 90295E | Washer, M4TA / BMXA / S4XA Under Mainshaft Nut (1.204”OD) | — |
| 297 not on diagram | Part # 90297E | Washer, M4TA / BMXA / SP7A / MP7A / S4XA Under Countershaft Nut (1.400”OD) | — |
| 887 not on diagram | Part # 60887A | Split Washer, AK/AS/F4/K4/CA/L4/P1/G4/L5/PL5X (Horse Shoe) 2 Per Pack | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 900 not on diagram | Part # 90900B | Servo Assembly, S24A / A24A / M24A (Cast # P24Y) With Secondary Valve Body | 1 |
| 900 not on diagram | Part # 90900D | Servo Assembly, A4RA (Cast # P4R2) With Secondary Valve Body (Uses A 2 Bolt Shift Fork Detent On Top)… | 1 |
| 900 not on diagram | Part # 90900E | Servo Assembly, M4TA (Cast # P4R-1) With Secondary Valve Body (Uses A 2 Bolt Shift Fork Detent On Top)… | 1 |
| 900 not on diagram | Part # 90900F | Servo Assembly, B4RA (Cast # P4R4) With Secondary Valve Body (Uses A Built In To Housing Shift Fork Detent)… | 1 |
| 900 not on diagram | Part # 90900H | Servo Assembly, SP7A / MP7A / S4XA (Cast # P56) With Secondary Valve Body (With 3 Bolt Shift Fork Detent On Top)… | 1 |
| 900 not on diagram | Part # 90900J | Servo Assembly, MDLA (Cast # PDM) | — |
| 900 not on diagram | Part # 90900K | Servo Assembly, BMXA/MDMA (Cast # P4R8) (With Secondary Valve Body)(Uses A Built In To Housing Shift Fork Detent)… | 1 |
| 900 not on diagram | Part # 90900KA | Servo Assembly, SDMA (Cast # P4R8) (With Secondary Valve Body)(Uses A Built In To Housing Shift Fork Detent)… | 1 |
| 900 not on diagram | Part # 90900M | Servo Assembly, BMXA (Cast # P4R)(With Secondary Valve Body) (Uses A Built In To Housing Shift Fork Detent)… | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 530 | Part # 60530C | Pump Gear Set, PX4B/AOYA/APXA/APX4/A6VA/BOYA/MP1A/MPJA/MPOA/MPWA (Accord)/MPXA (38 Spline Gear) 28 Teeth (.470” Thick) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 90100A | Friction, S5 / MPSA / S24A / A24A / A4RA / B4RA / M24A / BMXA / BDRA 1st/2nd/3rd/4th Clutch (.075”) 38 Teeth (4.325”OD) | 1 |
| 100 | Part # 90100E | Friction, MDLA / M4TA / SLXA / S4XA 1st Clutch (Low) (.075”) 38 Teeth (4.560”OD) (W/Straight Grooves From ID To OD )… | — |
| 100 | Part # 90100EA | Friction, MDLA / MDMA / M4TA 2nd/3rd/4th Clutch (.075”) 38 Teeth (4.560”OD) (W/Turtle Shell Type Grooves)… | — |
| 100 | Part # 90100N | Friction, BZKA/MZKA 1st/2nd And 3rd Clutch (.076”)(42Teeth) 2003-Up | — |
| 100 | Part # 170100A | Friction, RO / MPRA (All Clutch Packs) (.077”) (41 Teeth) | 1 |
| 104 not on diagram | Part # 90104H | Friction, MP7A / SP7A / S4XA 2nd Clutch 1994-Up | — |
| 108 not on diagram | Part # 90108A | Friction, S5 / MPSA / S24A / A24A / M4TA / MDLA / M24A / SP7A / MP7A / S4XA Low/Hold Clutch (.079”) 38 Teeth (3.935”OD) | 1 |
| 119 not on diagram | Part # 90119C | Friction Module, A24A / M24A / S24A 1992-97 | — |
| 119 not on diagram | Part # 90119D | Friction Module, A4RA / B4RA / B46A / BDRA / M4RA / BMXA / SLXA 1996-Up | — |
| 119 not on diagram | Part # 90119ES1 | Friction Module, M4TA/MDLA/MDMA/S4XA (Stage 1) | — |
| 119 not on diagram | Part # 90119M | Friction Module, BMXA/SLXA 2001-05 | — |
| 120 | Part # 60120B | Steel, AS/CA Low/2nd/3rd/4th Clutch (.079”) 8 Teeth (3.230”ID) 1984-87 | 1 |
| 120 | Part # 60120BB | Steel, L4/P1/CA Low Clutch (.063”) 8 Teeth (3.230”ID) 1986-91 | 2 |
| 120 | Part # 90120D | Steel, A4RA / B4RA / BMXA / BDRA 1st Clutch (.063”) 18 Teeth (3.220”ID) | — |
| 120 | Part # 90120DA | Steel, A4RA / B4RA / BMXA / BDRA 2nd/3rd/4th Clutch (.079”) 18 Teeth (3.220”ID) | — |
| 120 | Part # 90120E | Steel, M4TA 1st Clutch (.063”) 10 Teeth (3.220”ID) | — |
| 120 | Part # 90120EA | Steel, M4TA / MDMA/ MDLA 2nd/3rd/4th Clutch (.079”) 10 Teeth (3.220”ID) Also Fits SP7A / MP7A / S4XA 2nd/3rd Clutch | — |
| 120 | Part # 90120N | Steel, MCVA/MRVA/BZKA/MZKA 3rd & 4th Clutch (.091”)(20 Teeth)(3.696”ID) 2002-05 | — |
| 120 | Part # 170120C | Steel, RO / MPRA 3rd / 4th Clutch (.079” Thick) 10 Teeth (3.44”ID) (Also RO / MPRA 1st Clutch) | 1 |
| 128 not on diagram | Part # 90128A | Steel, S5 / MPSA / A24A / M24A / SP7A / S4XA Low/Hold Clutch (.079”) 18 Teeth (2.800”ID) | 1 |
| 128 not on diagram | Part # 90128B | Steel, S24A / M4TA / MDLA / MP7A Low/Hold Clutch (.063”) 18 Teeth (2.800”ID) | — |
| 140 | Part # 60140B-2 | Pressure Plate, AS/CA/L4/P1 Low/2nd/3rd/4th Clutch (Stamped # 2) 8 Teeth (3.230”ID) 84-91 | — |
| 140 | Part # 60140B-3 | Pressure Plate, AS/CA/L4/P1 Low/2nd/3rd/4th Clutch (Stamped # 3) 8 Teeth (3.230”ID) 84-91 | — |
| 140 | Part # 60140B-4 | Pressure Plate, AS/CA/L4/P1 Low/2nd/3rd/4th Clutch (Stamped # 4) 8 Teeth (3.230”ID) 84-91 | — |
| 140 | Part # 60140B-5 | Pressure Plate, AS/CA/L4/P1 Low/2nd/3rd/4th Clutch (Stamped # 5) 8 Teeth (3.230”ID) 84-91 | — |
| 140 | Part # 60140B-6 | Pressure Plate, AS/CA/L4/P1 Low/2nd/3rd/4th Clutch (Stamped # 6) 8 Teeth (3.230”ID) 84-91 | — |
| 140 | Part # 60140B-7 | Pressure Plate, AS/CA/L4/P1 Low/2nd/3rd/4th Clutch (Stamped # 7) 8 Teeth (3.230”ID) 84-91 | — |
| 140 | Part # 60140C-1 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 1) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-2 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 2) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-3 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 3) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-4 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 4) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-5 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 5) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-6 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 6) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-7 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 7) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-8 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 8) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-9 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 9) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 60140C-10 | Pressure Plate, F4/K4/G4/L5/PL5X Low/2nd/3rd/4th Clutch (Stamped # 10) 10 Teeth (3.438”ID) 1986-91 | — |
| 140 | Part # 90140DA | Pressure Plate, A4RA / B4RA / BMXA 1st/2nd/3rd/4th Clutch (Stamped #1) 18 Teeth (3.223”ID) | — |
| 140 | Part # 90140DB | Pressure Plate, A4RA / B4RA / BMXA 1st/2nd/3rd/4th Clutch (Stamped #2) 18 Teeth (3.223”ID) | — |
| 140 | Part # 90140DC | Pressure Plate, A4RA / B4RA / BMXA 1st/2nd/3rd/4th Clutch (Stamped #3) 18 Teeth (3.223”ID) | — |
| 140 | Part # 90140DD | Pressure Plate, A4RA / B4RA 1st/2nd/3rd/4th Clutch (Stamped #4) 18 Teeth (3.223”ID) | — |
| 140 | Part # 90140DE | Pressure Plate, A4RA / B4RA 1st/2nd/3rd/4th Clutch (Stamped #5) 18 Teeth (3.223”ID) | — |
| 140 | Part # 90140DF | Pressure Plate, A4RA / B4RA 1st/2nd/3rd/4th Clutch (Stamped #6) 18 Teeth (3.223”ID) | — |
| 140 | Part # 90140DG | Pressure Plate, A4RA / B4RA 1st/2nd/3rd/4th Clutch (Stamped #7) 18 Teeth (3.223”ID) | — |
| 140 | Part # 90140ED | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #4) 10 Teeth… | — |
| 140 | Part # 90140EE | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #5) 10 Teeth… | — |
| 140 | Part # 90140EF | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #6) 10 Teeth… | — |
| 140 | Part # 90140EG | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #7) 10 Teeth… | — |
| 140 | Part # 90140EH | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #8) 10 Teeth… | — |
| 140 | Part # 90140EJ | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #9) 10 Teeth… | — |
| 140 | Part # 90140EK | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #10) 10 Teeth… | — |
| 140 | Part # 90140EL | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #11) 10 Teeth… | — |
| 140 | Part # 90140EM | Pressure Plate, M4TA / MDLA 1st/2nd/3rd/4th Clutch (Stamped #12) 10 Teeth… | — |
| 148 not on diagram | Part # 90148BA | Pressure Plate, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Stamped #1) 18 Teeth | — |
| 148 not on diagram | Part # 90148BB | Pressure Plate, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Stamped #2) 18 Teeth | — |
| 148 not on diagram | Part # 90148BC | Pressure Plate, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Stamped #3) 18 Teeth | — |
| 148 not on diagram | Part # 90148BD | Pressure Plate, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Stamped #4) 18 Teeth | — |
| 148 not on diagram | Part # 90148BE | Pressure Plate, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Stamped #5) 18 Teeth | — |
| 148 not on diagram | Part # 90148BF | Pressure Plate, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Stamped #6) 18 Teeth | — |
| 148 not on diagram | Part # 90148BG | Pressure Plate, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Stamped #7) 18 Teeth | — |
| 850 | Part # 60850C | Cushion, F4/K4/G4/L5/PL5X 1st/2nd/3rd/4th (4.200”OD) (.078” Thick) (Waved Replaces Beveled Cushion) | 1 |
| 850 | Part # 90850B | Cushion, S24A / A24A / A4RA / B4RA / M24A 1st/2nd/3rd/4th Clutch (3.980”OD) .078” Thick | — |
| 850 | Part # 90850BA | Cushion, S24A / A24A / A4RA / B4RA / M24A 1st/2nd/3rd/4th Clutch (3.980”OD) .070” Thick (3.430”ID) | — |
| 850 | Part # 90850BB | Cushion, S24A / A24A / A4RA / B4RA / M24A 1st/2nd/3rd/4th Clutch (3.980”OD) .060” Thick | — |
| 850 | Part # 90850EA | Cushion, M4TA / MDLA 3rd Clutch (4.200”OD) .060” Thick | — |
| 850 | Part # 90850EB | Cushion, M4TA 2nd Clutch (4.200”OD) .045” Thick | — |
| 850 | Part # 90850H | Cushion, RO/MPRA 4th Clutch (4.200”OD)(.072” Thick) | — |
| 850 | Part # 90850M | Cushion, BMXA 1st/3rd/4th Clutch (3.985”OD) .071” Thick (Split Not Solid) Wavy Not Dished | — |
| 853 not on diagram | Part # 90853B | Cushion, S24A / A24A / M24A / SP7A / MP7A / S4XA Low/Hold Clutch (Secondary Shaft) 3.615”OD (.064” Thick) | — |
| 853 not on diagram | Part # 90853E | Cushion, M4TA / MDLA Low/Hold Clutch (Secondary Shaft) 3.615”OD (.075” Thick) | — |
| 960 | Part # 70960C | Piston, MPWA (Vigor) Low / 2nd / 3rd / 4th Clutch (4.552”OD) (.318” Thick At Edge) | — |
| 960 | Part # 90960B | Piston, A24A / M24A / S24A 2nd Clutch (1.700”ID) (Also Fits A4RA / B4RA 1st/3rd & 4th Clutch)… | — |
| 960 | Part # 90960D | Piston, A4RA / B4RA / BMXA 1st/2nd/3rd/4th Clutch (4.315”OD) 1.666”ID (.320” Thick)… | — |
| 960 | Part # 90960E | Piston, M4TA / MDLA / SP7A / MP7A / S4XA 1st/3rd/4th Clutch (4.555”OD) 1.585”ID | — |
| 960 | Part # 90960EA | Piston, M4TA 2nd Clutch (4.555”OD) 1.705”ID | — |
| 960 | Part # 90960M | Piston, BMXA 2nd Clutch (4.315”OD) 1.665”ID (.355” Thick) | — |
| 964 not on diagram | Part # 90964B | Piston, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch (Secondary Shaft) 3.920”OD (1.340”ID)… | — |
| 970 | Part # 90970B | Spring, RO / MPRA Low / 4th Clutch (2.450”OD) (.238”OD Of Wire) (Also MPRA 2nd Clutch) | — |
| 970 | Part # 90970BA | Spring, S24A / A24A / A4RA / M4TA / B4R4A / M24A / MDLA 1st/2nd/3rd/4th Clutch (2.490”OD) 250”OD Of Wire… | — |
| 970 | Part # 90970BB | Spring, RO / MPRA 3rd Clutch (2.465”OD) (.268”OD Of Wire) Gold Colored Square Wire | — |
| 970 | Part # 90970H | Spring, SP7A / MP7A / S4XA 2nd/4th Clutch (Use 60972C) | — |
| 972 not on diagram | Part # 60972C | Spring, AK/AS/F4/K4/CA/P1/L4/G4/L5/PL5X Low/3rd/4th Clutch | — |
| 974 not on diagram | Part # 90974B | Spring, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch Return (Secondary Shaft) 2.125”OD… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 234 | Part # 90234B | Collar, S24A / A24A / M4TA / M24A 4th Gear To Mainshaft (1.260”OD) 1.024”ID (1.770” Long) (Has No Shoulder) | — |
| 234 | Part # 90234D | Collar W/Shoulder, A4RA / B4RA / MDLA / BMXA / S4XA 4th Gear To Mainshaft (2.080”OD Of Shoulder) 1.260”OD (1.024”ID)… | — |
| 234 | Part # 90234H | Collar W/Shoulder, SP7A / MP7A 4th Gear To Mainshaft (2.080”OD Of Shoulder) (1.260”OD) 1.024”ID (1.930” Long) | — |
| 243 | Part # 90243B | Collar W/Shoulder, S24A / A24A / M24A / SP7A / MP7A 1st Gear To Mainshaft (1.065” Long With Shoulder) | — |
| 243 | Part # 90243D | Collar, A4RA / B4RA / M4RA / MDLA / BMXA / S4XA 1st Gear To Mainshaft (1.065” Long W/Out Shoulder) | — |
| 246 not on diagram | Part # 90246B | Collar W/Shoulder, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA 4th Gear To Secondary Shaft | — |
| 267 | Part # 60267A1 | Collar, AK/AS/F4/K4/L4/P1 2nd Gear To 4th Gear (Countershaft) (1.535”) | 1 |
| 267 | Part # 60267A2 | Collar, AK/AS/F4/K4/L4/P1 2nd Gear To 4th Gear (Countershaft) (1.537”) | 1 |
| 267 | Part # 60267A3 | Collar, AK/AS/F4/K4/L4/P1 2nd Gear To 4th Gear (Countershaft) (1.539”) | 1 |
| 272 | Part # 90272B | Collar, S24A / A24A / M4TA / M24A / SP7A / MP7A Reverse Gear (Countershaft) 2 Notch (1.845”OD Shoulder) (1.259”OD)… | — |
| 272 | Part # 90272D | Collar, A4RA / B4RA / BMXA / S4XA Reverse Gear (Countershaft) 4 Notch (1.840”OD Of Shoulder) (1.259”OD) (1.023”OD)… | — |
| 278 | Part # 90278B | Collar, S24A / A24A / M4TA / M24A / SP7A / MP7A Low Gear (Countershaft) 2 Notch (1.845”OD Shoulder) (1.259”OD)… | — |
| 278 | Part # 90278D | Collar W/Race, RO / MPRA Low Gear (Countershaft) (Also RO / MPRA Reverse Gear (Countershaft) | — |
| 550 not on diagram | Part # 60550E | Drum, K4 (Some F4) 2-4 Clutch (Less Pistons) With Thick Hub | 1 |
| 550 not on diagram | Part # 60550G | Drum, L4/P1 2-4 Clutch (Less Pistons) | 1 |
| 550 not on diagram | Part # 90550D | Drum, A4RA / B4RA / BMXA 2-4 Clutch (18 Teeth Steels) Stamped Steel (2.370” Overall Thickness) (.125” Thick Hub)… | — |
| 554 not on diagram | Part # 60554C | Drum, F4/K4 Low Clutch (4 9/16”OD Frictions) | — |
| 554 not on diagram | Part # 90554B | Drum, S24A / M4TA / MDLA / SP7A / S4XA Low/Hold Clutch (Secondary Shaft) (1.175” Tall) | — |
| 554 not on diagram | Part # 90554C | Drum, A24A / M24A / MP7A Low/Hold Clutch (Secondary Shaft) (1.192” Tall) | — |
| 555 | Part # 90555B | Drum, S24A / A24A / M24A 3rd Clutch (8 Teeth Steels) (1.262” Tall) (1.426”ID Bore) (1.580”OD Hub) | — |
| 555 | Part # 90555D | Drum, A4RA / B4RA / BMXA 3rd Clutch (18 Teeth Steels) (1.240” Tall) (1.425”ID Bore) (1.660”OD Hub) | — |
| 555 | Part # 90555E | Drum, M4TA / MDLA / SP7A / MP7A / S4XA 3rd Clutch (10 Teeth Steels) (1.275” Tall) (1.430”ID Bore Stepped To 1.398”ID)… | — |
| 557 | Part # 90557B | Drum, S24A / A24A / M24A 1st Clutch (8 Teeth Steels) (Sealing Ring Is On The Clutch Side Of Drum) | — |
| 557 | Part # 90557D | Drum, A4RA / B4RA / BMXA 1st Clutch (18 Teeth Steels) (Sealing Ring Is On The Clutch Side Of Drum) | — |
| 557 | Part # 90557E | Drum, M4TA / MDLA 1st Clutch (10 Teeth Steels) Sealing Ring Is On The Clutch Side Of Drum | — |
| 557 | Part # 90557H | Drum, SP7A / MP7A 1st Clutch (10 Teeth Steels) Sealing Ring Is On The Clutch Side Of Drum | — |
| 658 | Part # 90658B | Sprag, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA Low (28 Lugs) | — |
| 672 not on diagram | Part # 90672B | Mainshaft, S24A / A24A / M24A (40 Teeth / No Groove) 15 1/2” Long | — |
| 672 not on diagram | Part # 90672D | Mainshaft, A4RA (41 Teeth / 1 Wide Groove) | — |
| 672 not on diagram | Part # 90672E | Mainshaft, M4TA (38 Teeth / 1 Wide & 1 Narrow Groove) 15 1/2” Long | — |
| 672 not on diagram | Part # 90672F | Mainshaft, B4RA / S4XA (40 Teeth / 2 Grooves) | — |
| 672 not on diagram | Part # 90672H | Mainshaft, SP7A / MP7A (40 Teeth / 3 Grooves) 15 5/8” Long | — |
| 672 not on diagram | Part # 90672M | Mainshaft, BMXA (40 Teeth / 3 Grooves, 1 Wide & 2 Narrow) 15 5/8” Long | — |
| 675 not on diagram | Part # 90675B | Secondary Shaft, S24A / A24A / M4TA / M24A / MDLA (5 3/5” Long) (Also Fits BMXA/SP7A/ MP7A/S4XA) | — |
| 676 | Part # 90676B | Countershaft, S24A / A24A / M24A (15 Teeth / 1 Groove) 11” Long | — |
| 676 | Part # 90676D | Countershaft, A4RA / B4RA / S4XA (14 Teeth / 3 Groove) 11 1/4” Long | — |
| 676 | Part # 90676E | Countershaft, M4TA / MDLA (14 Teeth / 4 Groove) 11 1/4” Long (1 Wide Groove & 3 Narrow Grooves) | — |
| 676 | Part # 90676H | Countershaft, SP7A / MP7A (14 Teeth / No Groove) (11 1/4” Long) | — |
| 676 | Part # 90676M | Countershaft, BMXA (15 Teeth / No Groove) (11 1/4” Long) | — |
| 676 | Part # 90676MA | Countershaft, BMXA (14 Teeth / 2 Groove)(11 1/4” Long) | — |
| 689 not on diagram | Part # 90689B | Cup, S24A / A24A / M4TA / M24A / SP7A / MP7A / S4XA Oil (On End Of Secondary Shaft) | — |
| 689 not on diagram | Part # 90689J | Cup, MDLA Oil (On End Of Secondary Shaft) (With Short Tube ) | — |
| 690 | Part # 90690B | Gear, S24A / A24A / M24A Park (18 Lugs / 5 Top Notches) (Countershaft) (4.405”OD) (2.626”OD Sprag Race)… | — |
| 690 | Part # 90690D | Gear, A4RA / M4TA / B4RA / BMXA / SP7A / MP7A / S4XA Park (18 Lugs / No Top Notches) (Countershaft) (4.405”OD)… | — |
| 715 not on diagram | Part # 90715B | Differential Assembly, S24A / A24A / M24A (65 Teeth / 2 Groove) | — |
| 715 not on diagram | Part # 90715D | Differential Assembly, A4RA / B4RA (61 Teeth / 3 Groove) (23 Teeth Speed-O) 2 Narrow Grooves & 1 Wide Groove… | — |
| 715 not on diagram | Part # 90715E | Differential Assembly, M4TA (61 Teeth / 4 Groove) (26 Teeth Speed-O) (53 Teeth Middle Gear) All Wheel Drive… | — |
| 715 not on diagram | Part # 90715H | Differential Assembly, SP7A / MP7A (61 Teeth / 3 Groove) (23 Teeth Speed-O) | — |
| 715 not on diagram | Part # 90715HA | Differential Assembly, S4XA (61 Teeth / 3 Groove) (23 Teeth Speed-O) 2 Narrow Grooves & 1 Wide Groove… | — |
| 715 not on diagram | Part # 90715J | Differential Assembly, MDLA (61 Teeth / 4 Grooves) (26 Teeth Speed-O) 2 Wheel Drive (3 Narrow Grooves & 1 Wide Groove) | — |
| 715 not on diagram | Part # 90715M | Differential Assembly, BMXA (61 Teeth / 2 Wide Grooves) (23 Teeth Speed-O) | — |
| 750 | Part # 90750B | Bell Housing, S24A / A24A / M24A (Cast # P24JO) 5 3/8” Top Bolts (A24A Has No Cast # But Is The Same As This One) | 1 |
| 750 | Part # 90750D | Bell Housing, A4RA / B54RA (Cast # P4R) 5 3/8” Top Bolts | 1 |
| 750 | Part # 90750E | Bell Housing, M4TA (Cast # PDM) 5 1/2” Top Bolts (All Wheel Drive) | — |
| 750 | Part # 90750H | Bell Housing, SP7A / MP7A / S4XA (Cast # P56) 5 1/2” Top Bolts | 1 |
| 750 | Part # 90750J | Bell Housing, MDLA (Cast # PDL) 5 1/2” Top Bolts | — |
| 750 | Part # 90750M | Bell Housing, BMXA (Cast # PLX) 5 1/2” Top Bolts | — |
| 759 | Part # 90759B | Rear Cover, S24A / A24A / M24A (Cast # P24) | 1 |
| 759 | Part # 90759D | Rear Cover, A4RA / B4RA (Cast # P4R) No Linkage Seal | 1 |
| 759 | Part # 90759E | Rear Cover, M4TA / MDLA (Cast # P4R, PDM) With Linkage Seal | 1 |
| 759 | Part # 90759H | Rear Cover, SP7A / MP7A (Cast # P56) | 1 |
| 759 | Part # 90759HA | Rear Cover, S4XA (Cast # P4X, P4T, Or P6M) | 3 |
| 759 | Part # 90759M | Rear Cover, BMXA (Cast # PLX) | — |
| 760 | Part # 90760B | Case, S24A / A24A / M24A (18 Bolt) No Solenoid | — |
| 760 | Part # 90760D | Case, A4RA / B4RA (18 Bolt) 3 Bolt Dual Solenoid (4 Bolt Single Solenoid) Top Vent | — |
| 760 | Part # 90760E | Case, M4TA (19 Bolt) 3 Bolt Dual Solenoid (4 Bolt Single Solenoid) Top Vent (All Wheel Drive) | — |
| 760 | Part # 90760H | Case, SP7A / MP7A / S4XA (18 Bolt) 3 Bolt Dual Solenoid (Top Vent) | — |
| 760 | Part # 90760J | Case, MDLA/MDMA AWD (19 Bolt)(3 Bolt Dual Solenoid)(4 Bolt Single Solenoid) | — |
| 760 | Part # 90760M | Case, BMXA (18 Bolt) (3 Bolt Dual Solenoid & 6 Bolt Dual Solenoid) Top Vent | — |
| 774 | Part # 90774B | Speed-O Housing, S24A / A24A / M24A / MDLA / SP7A / MP7A / S4XA (Aluminum) 20 Teeth (With 3 Pin Connector)… | — |
| 774 | Part # 90774D | Speed-O Housing, A4RA / M4TA / B4RA / BMXA (Plastic) 20 Teeth (With 3 Pin Connector)… | — |
| 774 | Part # 90774M | Speed-O Housing, BMXA (Plastic) 19 Teeth (With 3 Pin Connector) Sensor Is Made Into The Speed-O Housing | — |
| 800 | Part # 90800B | Gear, S24A / A24A / M24A 1st (Mainshaft) 20 Teeth (1 Groove) 38 Teeth Hub (1.710” Overall Height) | — |
| 800 | Part # 90800D | Gear, A4RA / B4RA 1st (Mainshaft) 20 Teeth (No Groove) 38 Teeth Hub (1.890” Overall Height) | — |
| 800 | Part # 90800E | Gear, M4TA / MDLA / BMXA / S4XA 1st (Mainshaft) 18 Teeth (1 Groove) 38 Teeth Hub (1.875” Overall Height) | — |
| 800 | Part # 90800H | Gear, SP7A / MP7A 1st (Mainshaft) 18 Teeth (1 Groove) 41 Teeth Hub (1.755” Overall Height) | — |
| 801 | Part # 90801B | Gear, S24A / A24A / M24A / SP7A / MP7A Low (Countershaft) 52 Teeth (1 Groove) 4.950”OD (1.495”ID) .860” Thick | — |
| 801 | Part # 90801D | Gear, A4RA Low (Countershaft) 52 Teeth (No Groove) 4.950”OD (1.495”ID) .860” Thick | — |
| 801 | Part # 90801E | Gear, M4TA / B4RA / MDLA / BMXA / S4XA Low (Countershaft) 49 Teeth (1 Groove) 4.795”OD (1.495”ID) .860”OD Thick | — |
| 802 not on diagram | Part # 90802B | Gear, S24A / A24A / M24A Low (Secondary Shaft) 52 Teeth (No Groove) Left Angle (With 2 Holes) | — |
| 802 not on diagram | Part # 90802E | Gear, M4TA / MDLA / S4XA Low (Secondary Shaft) 49 Teeth (1 Groove) Right Angle (Also Fits SPXA)… | — |
| 802 not on diagram | Part # 90802H | Gear, SP7A / MP7A Low (Secondary Shaft) 49 Teeth (1 Groove) Right Angle (With 2 Holes) | — |
| 803 not on diagram | Part # 90803B | Gear, S24A / A24A / M24A 2nd (Mainshaft) 32 Teeth (No Groove) 2.895”OD (1.615”ID) 1.325” Tall | — |
| 803 not on diagram | Part # 90803D | Gear, A4RA 2nd (Mainshaft) 32 Teeth (2 Groove) 2.895”OD (1.615”ID) 1.325” Tall | — |
| 803 not on diagram | Part # 90803E | Gear, M4TA / MDLA / S4XA 2nd (Mainshaft) 31 Teeth (2 Wide Grooves) 2.870”OD (1.615”ID) | — |
| 803 not on diagram | Part # 90803F | Gear, B4RA 2nd (Mainshaft) 31 Teeth (2 Narrow Grooves) 2.895”OD (1.615”ID) 1.325” Tall | — |
| 803 not on diagram | Part # 90803H | Gear, SP7A / MP7A 2nd (Mainshaft) 32 Teeth (1 Groove) 2.895”OD (1.615”ID) 1.275” Tall | — |
| 803 not on diagram | Part # 90803M | Gear, BMXA 2nd (Mainshaft) 32 Teeth (2 Grooves) 2.895”OD (1.615”ID) 1.325” Tall | — |
| 804 | Part # 90804B | Gear, S24A / A24A / M24A 2nd (Countershaft) 47 Teeth (No Groove) ID Splines Are Away From Gear End Of Nose… | — |
| 804 | Part # 90804D | Gear, A4RA / M4TA / B4RA / MDLA / BMXA / S4XA 2nd (Countershaft) 47 Teeth (2 Groove) | — |
| 804 | Part # 90804H | Gear, SP7A / MP7A 2nd (Countershaft) 47 Teeth (No Groove) | — |
| 807 | Part # 90807B | Gear, S24A / A24A / M24A 3rd (Countershaft) 39 Teeth (No Groove) | — |
| 807 | Part # 90807D | Gear, A4RA / SP7A / MP7A 3rd (Countershaft) 39 Teeth (1 Wide Groove) | — |
| 807 | Part # 90807E | Gear, M4TA / MDLA 3rd (Countershaft) 41 Teeth (No Groove) | — |
| 807 | Part # 90807F | Gear, B4RA / BMXA / S4XA 3rd (Countershaft) 39 Teeth (2 Groove) | — |
| 809 | Part # 90809B | Gear, S24A / A24A 4th (Mainshaft) 46 Teeth Big Gear (2 Grooves) 22 Teeth Small Gear (38 Teeth Hub) | — |
| 809 | Part # 90809D | Gear, A4RA / B4RA 4th Gear (Mainshaft) 47 Teeth Big Gear (1 Groove) 22 Teeth Small Gear (38 Teeth Hub) | — |
| 809 | Part # 90809E | Gear, M4TA / MDLA / BMXA 4th (Mainshaft) 45 Teeth Big Gear (2 Groove) 22 Teeth Small Gear (38 Teeth Hub) | — |
| 809 | Part # 90809G | Gear, M24A / SP7A / MP7A 4th (Mainshaft) 47 Teeth Big Gear (No Groove) 22 Teeth Small Gear (38 Teeth Hub) | — |
| 809 | Part # 90809M | Gear, BMXA / S4XA 4th (Mainshaft) 46 Teeth Big Bear, 1 Groove) (22 Teeth Small Gear) (38 Teeth Hub) | — |
| 810 | Part # 90810B | Gear, A24A / S24A (Some) 4th (Countershaft) 31 Teeth (2 Groove) | — |
| 810 | Part # 90810D | Gear, A4RA / B4RA / S4XA 4th (Countershaft) 30 Teeth (1 Groove) | — |
| 810 | Part # 90810E | Gear, M4TA / MDLA 4th (Countershaft) 32 Teeth (2 Groove) | — |
| 810 | Part # 90810G | Gear, M24A / S24A (Some) / SP7A / MP7A 4th (Countershaft) 30 Teeth (No Groove) | — |
| 810 | Part # 90810M | Gear, BMXA 4th (Countershaft) 31 Teeth (1 Wide Groove) | — |
| 811 not on diagram | Part # 90811B | Gear, S24A / A24A 4th (Secondary Shaft) 31 Teeth (No Groove) | — |
| 811 not on diagram | Part # 90811E | Gear, M4TA / MDLA 4th (Secondary Sahft) 32 Teeth (2 Groove) | — |
| 811 not on diagram | Part # 90811G | Gear, M24A / SP7A / MP7A 4th (Secondary Shaft) 30 Teeth (3 Groove) | — |
| 811 not on diagram | Part # 90811HA | Gear, S4XA 4th (Secondary Shaft) 30 Teeth (1 Groove) | — |
| 816 | Part # 90816B | Gear, S24A / A24A / M4TA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA Reverse (Countershaft) 43 Teeth (No Grove) .470”… | — |
| 816 | Part # 90816D | Gear, A4RA / B4RA Reverse (Countershaft) 43 Teeth (No Groove) .485” Thick (Has 4 Small Notches On Top) | — |
| 818 | Part # 60818A | Gear, AK/AS/L4/CA/P1 Reverse Idler (27 Teeth) | — |
| 835 | Part # 60835C | Hub, F4/K4/G4 Reverse (Countershaft) | 1 |
| 900 not on diagram | Part # 90900B-2 | Detent Housing, S24A / A24A / M24A Servo (Aluminum) 3 Bolt | — |
| 900 not on diagram | Part # 90900D-2 | Detent Housing, A4RA / M4TA Servo (Aluminum) 2 Bolt | — |
| 995 not on diagram | Part # 90995B | Park Pawl Assembly, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / MP7A / SP7A / S4XA | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 490 not on diagram | Part # 90490B | Vent, S24A / A24A / M24A (3 Bolt) Aluminum (On Rear Cover) | — |
| 493 | Part # 90493B | Dipstick, S24A / A24A / A4RA / M4TA / B4RA / M24A / BMXA / SP7A / MP7A / S4XA | — |
| 495 not on diagram | Part # 90495B | Intake Pipe, S24A / A24A / M24A Filter (8” Long) With Shield & 1 Hole Bracket) | — |
| 507 not on diagram | Part # 90507B-3 | Pin, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA / SP7A / MP7A / S4XA (Inner Pump Gear) (1.685” Long)… | — |
| 689 not on diagram | Part # 60689A | Plate, AK/AS/F4/K4/L4/CA/P1/G4/L5/PL5X Oil Guide | 1 |
| 694 not on diagram | Part # 90694B | Retainer, S24A / A24A / M4TA / M24A (Some M4TA) Holds Bearing # 248 To Shaft (1 5/8” Long) | — |
| 694 not on diagram | Part # 90694J | Retainer, M4TA / MDLA /SP7A / MP7A / S4XA (Some M4TA) Holds Bearing #248 To Shaft (1 1/4” Long) | — |
| 698 not on diagram | Part # 90698E | Oil Baffle, M4TA / SP7A / MP7A / S4XA Differential (Tin) | — |
| 741 | Part # 80741-1 | Valve & Spring, B6VA / BAXA / MAXA / M6HA (Converter Check Valve) In Valve Body | — |
| 741 | Part # 90741D-3 | Spring, A4RA / B4RA / M4RA CPC Valve 1996-99 | — |
| 749 not on diagram | Part # 90749B | Cam, S24A / A24A / M24A / SP7A / MP7A / S4XA (TV Link) Pie Shaped | — |
| 790 not on diagram | Part # 90790A | Bolt, A24A / M24A / S24A / M4TA / MDLA / SP7A / MP7A / S4XA Holds Secondary Shaft Bearing Retainer To Case (1 1/4”… | — |
| 795 | Part # 60795A | Nut, A24A / M24A / S24A (Mainshaft) (Left Hand Threads) | 1 |
| 795 | Part # 80795 | Nut, B6VA / BAXA / MAXA / M6HA (Some) Mainshaft (Left Hand Thread) .435” Thick | — |
| 795 | Part # 90795D | Nut, A4RA / B4RA / M4TA / MDLA / BMXA / S4XA (Mainshaft) (Left Hand Threads) | — |
| 796 | Part # 60796E | Nut, F4/K4/L4/P1 Countershaft (.845”ID) (Right Hand Threads) | 1 |
| 796 | Part # 90796B | Nut, S24A / A24A / M24A / M24A / MDLA / SP7A / MP7A / SX4A (Secondary Shaft) (Right Hand Threads) | — |
| 796 | Part # 90796D | Nut, B4RA / A4RA / MP7A / SP7A / S4XA / BMXA (Countershaft) (Left Hand Threads) | — |
| 796 | Part # 90796H | Replaced by 40796A | — |
| 819 | Part # 90819B | Pin, S24A / A24A / A4RA / M4TA / B4RA Reverse Idler | — |
| 820 | Part # 90820B | Bracket, S24A / A24A / A4RA / M4TA / B4RA / M24A / BMXA / SP7A / MP7A / S4XA Reverse Idler | — |
| 830 | Part # 60830CA | Selector, F4/K4 Reverse (Countershaft) (2.275”OD Where Fork Rides) (Has Left | 1 |
| 840 | Part # 90840B | Shift Fork, S24A / A24A / A4RA / M4TA / B4RA / M24A / MDLA / BMXA SP7A / MP7A / S4XA (Cast # P24) | 1 |
| 861 | Part # 60861B | Snap Ring, AS/CA/L4/P1 Holds Pressure Plate In Drum | — |
| 861 | Part # 90861E | Snap Ring, B6VA/BAXA/MAXA/M6HA Holds 1st/2nd/3rd/4th Clutch Pressure Plate In Drum (4.688”OD) | — |
| 862 | Part # 90862B | Snap Ring, RO / MPRA Low / 3rd Clutch (1.780”OD) (.145” Thick ID To OD) (Also MPRA 2nd Clutch) | — |
| 862 | Part # 90862BA | Snap Ring, A4RA / B4RA Holds 1st/2nd/3rd/4th Clutch Retainer In (1.810”OD) .120” Thick ID To OD… | — |
| 862 | Part # 90862E | Snap Ring, BAYA/BGFA/BGHA/BVGA-5/BVGA-6/BVGA-7/BYBA/B7WA/MFYA/MGFA/MGHA/ MGSA/M7WA 3rd Clutch Retainer… | — |
| 867 not on diagram | Part # 90867B | Snap Ring, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Holds Low/Hold Pressure Plate In Drum (Secondary… | — |
| 870 not on diagram | Part # 60870A | Snap Ring, AK/AS/CA/L4/P1 Holds Bearing In Stator (Front) | — |
| 877 not on diagram | Part # 90877B | Snap Ring, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Holds Retainer In Low/Hold Drum (Secondary Shaft)… | — |
| 879 not on diagram | Part # 60879C | Snap Ring, A24A / M24A / S24A / A4RA / B4RA / M4TA / MDLA / BMXA / SP7A / MP7A / S4XA Holds Caged Needle Bearing To… | 1 |
| 881 | Part # 90881B | Snap Ring, S24A / A24A / A4RA / MDLA / M4TA / B4RA / M24A / BMXA / SP7A / MP7A / S4XA (Mainshaft) Round Wire… | — |
| 883 | Part # 60883C | Snap Ring, F4/K4/G4/L5 Holds Mainshaft Ball Bearing To Case | — |
| 883 | Part # 90883A | Snap Ring, S24A / A24A / A4RA / M4TA / B4RA / M24A / BMXA / MDLA Holds Mainshaft Bearing To Case (Use 60884CA) | — |
| 884 | Part # 60884C | Snap Ring, F4/K4 Holds Countershaft Bearing With 2.670”OD To Case | 1 |
| 884 | Part # 60884CA | Snap Ring, B6VA / BAXA / MAXA / MPZA / M6HA Countershaft Ball Bearing To Case… | — |
| 889 not on diagram | Part # 90889A | Snap Ring, S24A / A24A / M4TA / MDLA / SP7A / MP7A / S4XA 2nd Shaft Ball Bearing To Case (Use 60883C) | — |
| 899 | Part # 90899BA | Snap Ring, RO/MPRA Differential Bearing To Case (.106”) | — |
| 899 | Part # 90899BB | Snap Ring, RO/MPRA Differential Bearing To Case (.108”) | — |
| 899 | Part # 90899BC | Snap Ring, RO/MPRA Differential Bearing To Case (.110”) | — |
| 899 | Part # 90899BD | Snap Ring, RO/MPRA Differential Bearing To Case (.112”) | — |
| 899 | Part # 90899BE | Snap Ring, RO/MPRA Differential Bearing To Case (.114”) | — |
| 980 | Part # 90980B | Retainer, MPYA / M5DA Reverse Clutch Spring | — |
| 980 | Part # 90980BA | Retainer, A4RA / B4RA 1st/2nd/4th Clutch (2.445”OD) 1.680”ID (Also Fits S24A / A24A / M24A 2nd Clutch)… | — |
| 980 | Part # 90980E | Retainer, M4TA 2nd Clutch (2.445”OD) 1.715”ID (Also Fits SP7A / MP7A / S4XA 2nd Clutch) | — |
| 980 | Part # 90980N | Retainer/Piston, BZKA/MCVA/MRVA/MZKA 1st/2nd Clutch (Bonded) Spring 2002-07 | — |
| 984 not on diagram | Part # 90984B | Retainer, S24A / A24A / M4TA / M24A / MDLA / SP7A / MP7A / S4XA Low/Hold Clutch Spring (Secondary Shaft) 2.065”OD… | — |
| 991 | Part # 90991B | Shift Rod, S24A / A4RA / B4RA / SP7A / S4XA (12 5/16” Long) Welded On Rooster Comb | — |
| 991 | Part # 90991C | Shift Rod, A24A / M24A / MP7A (12 5/16” Long) Rooster Comb Held On By A Pin | — |
| 991 | Part # 90991E | Shift Rod, M4TA / MDLA / BMXA (13 1/4” Long) Welded On Rooster Comb | — |
| 996 | Part # 80996 | Fitting, AOYA/APXA/BOYA/MP1A/MPJA/MPXA/PX4B Cooler Line (1 1/2” Long) Holds Cooler Line To Bell | 1 |
| 996 | Part # 80996A | Fitting, AOYA/APXA/BOYA/MP1A/MPJA/MPXA/PX4B Cooler Line (4 5/8” Long) Holds Cooler Line To Bell | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.