4L30E parts diagram
Transmission page:
Positions:
187 total, 124 on the diagram
Parts:
418 total, 218 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 24000 | Paper & Rubber Kit, 180/180C Combo 1969-Up | — |
| 000 not on diagram | Part # 24000A | Paper & Rubber Kit, 180C (Post Office & Luv) 1987-Up | — |
| 000 not on diagram | Part # 24000EF | Paper & Rubber Kit, 4L30E 1989-04 (Farpak) | — |
| 002 not on diagram | Part # 24002 | Overhaul Kit, 180/180C Combo 1969-Up | — |
| 002 not on diagram | Part # 24002A | Overhaul Kit, 180C (Post Office, Luv & Tracker) 1987-Up… | — |
| 002 not on diagram | Part # 24002EF | Overhaul Kit, 4L30E 1989-04 (Farpak)(For BMW Sell 69074 Also)(With The Overrun Bonded Piston) | — |
| 004 not on diagram | Part # 24004 | Master L/Steel Kit, 180/180C Combo 1969-Up | — |
| 004 not on diagram | Part # 24004A | Master L/Steel Kit, 180C (Post Office, Luv & Tracker) 1987-Up… | — |
| 004 not on diagram | Part # 24004EAF | Master L/Steel Kit, 4L30E 1998-Up (Farpak) (With Overrun Clutch Bonded Piston) | — |
| 004 not on diagram | Part # 24004EF | Master L/Steel Kit, 4L30E 1989-97 (Farpak) (For BMW Sell 69074 Also) (With Overrun Clutch Bonded Piston) | — |
| 006 not on diagram | Part # 24006 | Master W/Steel Kit, 180/180C Combo 1969-Up | — |
| 006 not on diagram | Part # 24006A | Master W/Steel Kit, 180C (Post Office, Luv & Tracker) 1987-Up… | — |
| 006 not on diagram | Part # 24006EAF | Master W/Steel Kit, 4L30E 1998-Up (Farpak) (With Overrun Clutch Bonded Piston) | — |
| 006 not on diagram | Part # 24006EF | Master W/Steel Kit, 4L30E 1989-97 (Farpak)(For BMW Sell 69074 Also)(With Overrun Clutch Bonded Piston) | — |
| 011 not on diagram | Part # 24011 | Filter Kit, 180/180C 1969-Up | — |
| 011 not on diagram | Part # 24011E | Filter Kit, 4L30E Isuzu 1989-Up (Clear Cover) | — |
| 011 not on diagram | Part # 24011EA | Filter Kit, 4L30E BMW 1991-Up (Black Cover) | — |
| 011 not on diagram | Part # 24011EB | Filter Kit, 4L30E Sidekick 1991-92 | — |
| 030 not on diagram | Part # 24030 | Bushing Kit, 180/180C 1969-Up | — |
| 030 not on diagram | Part # 24030B | Bushing Kit, 4L30E 1989-Up (Contains: 9 Bushing) | — |
| 165 not on diagram | Part # T24165EA | Shift Kit, 4L30E… | — |
| 175 not on diagram | Part # 24175 | Ring Kit, 180/180C 1969-Up | — |
| 175 not on diagram | Part # 24175B | Ring Kit, 180/180C (For Holden Only) | — |
| 175 not on diagram | Part # 24175E | Ring Kit, 4L30E 1989-Up | — |
| 200 not on diagram | Part # 24200 | Washer Kit, 180/180C 1969-86 | — |
| 200 not on diagram | Part # 24200B | Washer Kit, 180/180C/4L30E 1987-Up | — |
| 211 | Part # 24211AK | Washer Kit, 180/180C/4L30E Pump/Center Support (6 Selectives)(No Tab) 1969-Up | — |
| 211 | Part # S24211BBK | Washer & Shim Kit, 180C/4L30E Pump/Center Support (With 2- .075” 3 Tab Washers, 4- .010” Shims & 2- .030” Shims)… | 1 |
| 445 not on diagram | Part # 84445K | Repair Kit, 125C External Wire Harness (Square 5 Prong)(Plugs Into Connector) 1983-Up | — |
| 449 not on diagram | Part # 24449 | E-Place, 4L30E Electronic Controller Kit (ATG) | 1 |
| 552 | Part # 245552EK | Drum Kit, 4L30E 2nd Clutch (With Piston Kit) 1989-Up (This Will Retro Fit 24552A) | — |
| 560 not on diagram | Part # 24560 | Piston Kit, 4L30E 4th Clutch 1989-Up | — |
| 561 not on diagram | Part # 24561 | Piston Kit, 4L30E Overrun Clutch 1989-Up | — |
| 562 not on diagram | Part # 24562 | Piston Kit, 180/180C/4L30E 2nd Clutch (1.450” Overall Thickness) 1969-Up | — |
| 562 not on diagram | Part # 24562A | Piston Kit, 180/180C/4L30E 2nd Clutch (1.250” Overall Thickness) 1969-Up | — |
| 565 not on diagram | Part # 24565 | Piston Kit, 180/180C 3rd Clutch (15/16” Thick) 1969-Up | — |
| 565 not on diagram | Part # 24565E | Piston Kit, 4L30E 3rd Clutch (9/16” Thick) 1989-Up | — |
| 566 not on diagram | Part # 24566 | Piston Kit, 180/180C Reverse Clutch (1 1/2” Thick) 1969-Up | — |
| 566 not on diagram | Part # 24566A | Piston Kit, 180/180C Reverse Clutch (1 5/8” Thick) 1969-Up | — |
| 566 not on diagram | Part # 24566E | Piston Kit, 4L30E Reverse Clutch (1 5/16” Thick) 1989-Up | — |
| 584 | Part # 24584EK | Planet Kit, 4L30E W/8” Output Shaft 4X4 (4 Gear)(46 Teeth Sun Gear # 614) 1989-Up (Contains; # 584,612,614, & 594) | — |
| 584 | Part # 24584K | Planet Kit, 180/180C W/13 3/4” Output Shaft (3 Gear)(25 Teeth Sun Gear # 612) 1969-Up (Contains; # 584,612,614, & 594) | — |
| 999 not on diagram | Part # 24999 | Oil Tube Set, 180/180C 1969-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 160 not on diagram | Part # 24160 | Modulator, 180/180C (1 Green Stripe) (Non-Broached Style) (Non-Adjustable) 1969-Up | 1 |
| 160 not on diagram | Part # 24160B | Modulator, 180/180C (1 Blue Stripe) (Broached Style) (Non-Adjustable) 1969-Up | 1 |
| 160 not on diagram | Part # 24160C | Modulator, 180/180C (2 Green Stripes) (Adjustable) 1969-Up | 1 |
| 160 not on diagram | Part # 24160CA | Modulator, 180/180C (1 Green Stripe) (Non-Adjustable) (Post Office) (Can Use 24160) | 1 |
| 160 not on diagram | Part # 24160E | Modulator, 180/180C (2 Blue Stripes) (Cheverolet Round Hole)(Adjustable) 1969-Up | 1 |
| 160 not on diagram | Part # 24160G | Modulator, 180/180C (1 Purple Stripe) (Suzuki, GEO Tracker) (Adjustable) 1989-Up | 1 |
| 163 not on diagram | Part # 24163 | Valve, 180/180C Under Modulator 1969-Up | 1 |
| 165 not on diagram | Part # A24165E | Valve Body Kit, 4L30E (Translab) | 1 |
| 165 not on diagram | Part # S24165E | Valve Body Kit, 4L30E (Superior) | — |
| 165 not on diagram | Part # T24165 | Valve Body Kit, 180C (Post Office, Luv) 1982-Up (Transgo) | 1 |
| 418 not on diagram | Part # 24418 | Solenoid, 4L30E PWM (Band Control) 1989-Up | 1 |
| 418 not on diagram | Part # 34418 | Solenoid, 4L30E TCC 2000-Up | 1 |
| 421 not on diagram | Part # 24421E | Solenoid, 4L30E 1-2 & 3-4 Shift 1989-Up | 1 |
| 422 | Part # 24422E | Solenoid, 4L30E 2-3 Shift 1989-Up | 1 |
| 425 | Part # 24425 | Solenoid, 180C TCC Lock-Up 1980-81 | — |
| 425 | Part # 24425B | Solenoid, 180C TCC Lock-Up 1982-Up | 1 |
| 425 | Part # 24425E | Solenoid, 4L30E TCC Lock-Up 1989-00 (With 2 Prong Connector) | 1 |
| 425 | Part # 24425F | Solenoid, 4L30E TCC Lock-Up 2000-Up (With 2 Prong Oval Connector)(Can Use 34418) | 1 |
| 435 | Part # 24435EA | Solenoid, 4L30E Pressure Control (Force Motor) 1997-Up (Has 2 Flat Blades On End)(1.396”OD) (This Is The Bosch) | 1 |
| 435 | Part # 34435A | Solenoid, 4L30E Pressure Control (Force Motor) 1989-97 (Has 2 Flat Blades On End Of Solenoid) | 2 |
| 507 not on diagram | Part # S24507PAAK | Valve & Sleeve Kit, 4L30E Pressure Regulator Boost (Small/Medium Ratio)(Sonnax) | — |
| 507 not on diagram | Part # S24507PAK | Valve & Sleeve Kit, 4L30E Pressure Regulator Boost (Small Ratio) (Sonnax) | 1 |
| 507 not on diagram | Part # S24507PBK | Valve & Sleeve Kit, 4L30E Pressure Regulator Boost (Medium Ratio) (Sonnax) | 1 |
| 507 not on diagram | Part # S24507PK | Valve & Sleeve Kit, 4L30E Pressure Regulator Boost (Large Ratio) (Sonnax) | 1 |
| 680 not on diagram | Part # 24680 | Governor, 180/180C 2 Bolt Type 1969-Up | — |
| 680 not on diagram | Part # 24680A | Governor, 180/180C 4 Bolt Type 1969-Up | 1 |
| 740 | Part # 24740 | Valve Body, 180 1969-80 | — |
| 740 | Part # 24740A | Valve Body, 180 Non Lock-Up (Chevy) 1981 | — |
| 740 | Part # 24740B | Valve Body, 180C Lock-Up 1982-Up | 1 |
| 740 | Part # 24740BA | Valve Body, 180C Lock-Up (W/out Plate)82-Up(Seperator Plate Bolts To The Transmission) | — |
| 740 | Part # 24740E | Valve Body, 4L30E (W/3 Solenoids) 1989-Up | 1 |
| 744 | Part # 24744 | Auxillary Valve Body, 4L30E (Cast Iron) 1989-Up | — |
| 744 | Part # 24744B | Auxillary Valve Body, 4L30E (Alum) 1989-Up | — |
| 928 | Part # S24928-1K | Accumulator Pin Kit, 180/180C/4L30E 1-2 (Contains: 4 Oversized Pins & 8 E-Clips (Sonnax)(No Reamer) | — |
| 928 | Part # S24928K | Accumulator Pin Kit, 180/180C/4L30E 1-2 (Contains: 1 Reamer, 10 Oversized Pins & 20 E-Clips) (Sonnax) | — |
| 935 not on diagram | Part # 24935 | Accumulator Assembly, 4L30E 3-4 (With Aluminum Cover With O-Ring Groove) | — |
| 935 not on diagram | Part # 24935A | Accumulator Assembly, 4L30E 3-4 (With Bonded Cover) | — |
| 935 not on diagram | Part # 24935B | Accumulator Asembly, 4L30E (BMW) 3-4 (With Aluminum Cover With No O-Ring Grooves) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 411 not on diagram | Part # 24411 | Switch, 180/180C 2nd Clutch Pressure 1969-Up | — |
| 416 not on diagram | Part # 44416A | Switch, 180/180C Governor Pressure 40 PSI 1969-Up | 1 |
| 416 not on diagram | Part # 44416B | Switch, 180/180C Governor Pressure 46 PSI 1969-Up | 1 |
| 416 not on diagram | Part # 44416C | Switch, 180/180C Governor Pressure 48 PSI 1969-Up | 1 |
| 416 not on diagram | Part # 44416D | Switch, 180/180C Governor Pressure 50 PSI 1969-Up | 1 |
| 416 not on diagram | Part # 44416DA | Switch, 180/180C Governor Pressure 52 PSI 1969-Up | 1 |
| 416 not on diagram | Part # 44416E | Switch, 180/180C Governor Pressure 54 PSI 1969-Up | 1 |
| 436 | Part # 24436 | Sensor, 4L30E Output Speed (Except BMW) 1989-Up | 1 |
| 442 not on diagram | Part # 44442A | Universal Adj Vacuum Switch, 700R4 (1”) | — |
| 442 not on diagram | Part # 44442B | Universal Adj Vacuum Switch, 700R4 (6”) | — |
| 444 | Part # 64444A | Connector, 125C Case (Round 5 Wire) 1983-Up | 1 |
| 444 | Part # 74444A | Connector, 125C Case (3 Prong) 1982-Up | 1 |
| 444 | Part # 84444 | Connector, 125C Case (4 Prong Square) 1989-Up | 1 |
| 444 | Part # 84444C | Connector, 4L30E Case (7 Prong) | 1 |
| 445 not on diagram | Part # 24445E | Wire Harness, 4L30E External (Round 5 Wire) 1989-Up | — |
| 446 | Part # 24446 | Wire Harness, 4L30E Internal (4 Wire Connector That Plugs Into The Case Connector With 3 Two Wire Connectors) 1989-Up | — |
| 446 | Part # 24446A | Wire Harness, 4L30E Internal (4 Wire Connector That Plugs Into The Case Connector With 2 Two Wire Connectors) 1989-Up | — |
| 446 | Part # 24446AA | Wire Harness, 4L30E Internal… | — |
| 446 | Part # 24446B | Wire Harness, 4L30E Internal (6 Wire Round Connector That Plugs Into The Case Connector With 3 Two Wire Connectors)… | — |
| 446 | Part # 24446D | Wire Harness, 4L30E Internal… | — |
| 447 not on diagram | Part # 24447 | Wire Harness, 4L30E Internal Auxillary… | — |
| 447 not on diagram | Part # 24447A | Wire Harness, 4L30E Internal Auxillary… | — |
| 447 not on diagram | Part # 24447AA | Wire Harness, 4L40E Internal Auxillary… | — |
| 447 not on diagram | Part # 24447C | Wire Harness, 4L30E Internal Auxillary… | — |
| 681 | Part # 24681E | Electric Pick-Up, 4L30E (12 Lug) 1989-Up | 1 |
| 681 | Part # 24681EA | Electric Pick-Up, 4L30E (12 Lug) With Hub & 2 Slots In Hub | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 24010 | Filter, 180/180C 1969-Up | 1 |
| 010 | Part # 24010E | Filter, 4L30E (1/2” Tall Pick-Up)(Tan) 1989-Up | 1 |
| 010 | Part # 24010EA | Filter, 4L30E (11/16” Tall Pick-Up) 1991-Up | — |
| 015 not on diagram | Part # 24015 | Filter, 4L30E PWM Solenoid Screen (3 3/4” Long)(In Valve Body) 1989-Up | 1 |
| 016 not on diagram | Part # 54016B | Filter, 180/180C Governor (Tapered) | 1 |
| 018 not on diagram | Part # 24018 | Filter, 4L30E Force Motor Screen (In Auxillary Valve Body) 1989-Up | 1 |
| 765 | Part # 24765 | Pan, 180/180C Bottom 1969-up | — |
| 765 | Part # 24765E | Pan, 4L30E Bottom (Rear)(No Drain Plug) 1989-Up | 1 |
| 765 | Part # 24765EA | Pan, 4L30E Bottom (Rear)(W/2 Drain Plugs)(Isuzu) | — |
| 765 | Part # 24765EB | Pan, 4L30E Bottom (Rear)(W/2 Drain Plugs)(BMW) | — |
| 766 | Part # 24766 | Pan, 4L30E Overdrive Case (Front) 1989-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 24070A | Seal, 4L30E Front (Converter Housing) 1989-Up | 1 |
| 070 | Part # 44070 | Seal, 180/180C Front (Converter Housing) 1969-Up | 3 |
| 072 not on diagram | Part # 44072 | Seal, 1000/2000 Allison Manual Lever 2000-Up | 2 |
| 072 not on diagram | Part # 84072A | Seal, 125C Manual Lever 1984-Up | 1 |
| 074 not on diagram | Part # 24074 | Seal, 180 Rear (Fiat) | — |
| 074 not on diagram | Part # 24074A | Seal, 180/180C/4L30E Rear (Sidekick, Tracker 2wd) 1990-Up | 1 |
| 074 not on diagram | Part # 44074 | Seal, 180/180C/4L30E Rear 1969-Up | 2 |
| 074 not on diagram | Part # 44074C | Seal, 180/180C/4L30E Rear (With Flange) With Short Boot | — |
| 074 not on diagram | Part # 69074 | Seal, 4L30E (BMW) Extension Housing Seal (2.292”OD) 1989-02 | 1 |
| 078 | Part # 44078X | Seal, 125/125C Speed-O Shaft 1980-Up | 1 |
| 177 not on diagram | Part # 54177AT | Ring, 200/200C/200-4R Turbine Shaft & Forward Drum Shaft (Teflon, Scarf Cut) 1976-90 | 1 |
| 177 not on diagram | Part # 54177BT | Ring, 200-4R Turbine Shaft (Teflon, Solid) 1981-90 | 1 |
| 179 not on diagram | Part # 24179 | Ring, 180/180C Stator 1969-Up (4L30E Center Support 1989-Up) | 1 |
| 189 | Part # 24189 | Ring, 180/180C/4L30E Governor Hub 1969-Up | 1 |
| 189 | Part # 24189B | Ring, 180C Governor Hub (For Holden Only) | — |
| 192 not on diagram | Part # 34192 | Ring, 180/180C/4L30E Accumulator Piston 1969-Up | 1 |
| 195 not on diagram | Part # 24195 | Ring, 180/180C/4L30E Low Servo Piston 1969-Up | 1 |
| 300 | Part # 24300 | Gasket, 180/180C Bottom Pan 1969-Up | 1 |
| 300 | Part # 24300A | Gasket, 4L30E (GM & Holden) Bottom Pan 1989-Up | 1 |
| 300 | Part # 24300B | Gasket, 4L30E (BMW) Bottom Pan 1990-Up | 1 |
| 301 | Part # 24301A | Gasket, 4L30E Front Overdrive Pan 1989-Up | 1 |
| 305 | Part # 24305 | Gasket, 180/180C/4L30E Extension Housing 1969-Up | 1 |
| 305 | Part # 24305E | Gasket, 4L30E Extension Housing 1989-Up | — |
| 307 | Part # 24307 | Gasket, 180/180C Servo Cover 1969-Up | — |
| 309 not on diagram | Part # 44309 | Gasket, 180/180C Pump Bolt Washer 1969-Up | 2 |
| 310 | Part # 24310 | Gasket, 180/180C Pump 1969-Up | 1 |
| 310 | Part # 24310E | Gasket, 4L30E Pump 1989-Up | — |
| 311 | Part # 24311 | O-Ring, 180/180C/4L30E Pump OD Housing To Case 1969-Up | 1 |
| 318 | Part # 24318B | Gasket, 4L30E Center Support To Plate 1989-91 (Takes 2) | — |
| 318 | Part # 24318BA | Gasket, 4L30E Center Support To Plate 1992-Up (Takes 2) | 1 |
| 320 | Part # 24320 | Gasket, 180/180C Valve Body(Upper)(Exc 1987-Up P.O., Luv, Tracker & Sidekick) 1969-Up | 1 |
| 320 | Part # 24320A | Gasket, 180/180C Valve Body(Upper)(Post Office, Luv, Tracker & Sidekick) 1987-Up | — |
| 320 | Part # 24320B | Gasket, 4L30E Valve Body (Upper) 1989-11/93 | — |
| 320 | Part # 24320BA | Gasket, 4L30E Valve Body (Upper) 12/93-Up | — |
| 321 not on diagram | Part # 24321 | Gasket, 180/180C Valve Body(Lower)(Exc 1987-Up P.O., Luv, Tracker & Sidekick) 1969-Up | 1 |
| 321 not on diagram | Part # 24321A | Gasket, 180/180C Valve Body(Lower)(Post Office, Luv, Tracker & Sidekick) 1987-Up | — |
| 321 not on diagram | Part # 24321B | Gasket, 4L30E Valve Body (Lower) 1989-Up | — |
| 326 not on diagram | Part # 24326 | Gasket, 180/180C Filter 1969-Up | 1 |
| 327 not on diagram | Part # 24327 | Gasket, 180/180C Modulator 1969-Up | — |
| 336 | Part # 24336 | Lip Seal, 180/180C/4L30E 3rd Clutch (Inner) | — |
| 354 not on diagram | Part # 24354 | O-Ring, 4L30E 4th Accumulator Cover (For Aluminum Cover) | — |
| 371 not on diagram | Part # 44371A | Gasket, 010/087/089/090 Filler Tube | 1 |
| 371 not on diagram | Part # 44371B | Boot, 125C Filler Tube 1980-Up | 2 |
| 372 not on diagram | Part # 24372 | O-Ring, 180/180C Detent Cable 1969-Up | 1 |
| 380 not on diagram | Part # 64380 | O-Ring, 125/125C Turbine Shaft (Goes Behind Splines) 1982-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 44034 | Bushing, 180/180C Pump Body | 2 |
| 034 | Part # S24034 | Bushing, 4L30E Converter Housing (Sonnax) | 1 |
| 036 | Part # 54036A | Bushing, 125/125C Converter Reactor (Stator) 1980-Up | 1 |
| 037 | Part # 24037 | Bushing, 180/180C Pump Stator (Rear) 1969-Up | 1 |
| 037 | Part # 24037B | Bushing, 4L30E Center Support 1989-Up | — |
| 039 | Part # 54039B | Bushing, 200-4R Overrun Drum 1981-90 | 1 |
| 042 | Part # 24042 | Replaced by 64044 | 1 |
| 046 | Part # 24046 | Bushing, 180/180C/4L30E 2nd Clutch Drum 1969-Up | 1 |
| 048 | Part # 54048B | Bushing, 200-4R Forward Drum (Pilot) 1981-90 | 1 |
| 050 | Part # 24050 | Bushing, 180/180C Rear Band Drum (Also Fits 4L30E Input Sungear/Rear Band Drum) | 1 |
| 064 | Part # 24064 | Bushing, 180/180C/4L30E Case 1969-Up | 1 |
| 064 | Part # 24064B | Bushing, 180/180C/4L30E Case (No Walk) 1969-Up | — |
| 064 | Part # 24064S | Bushing/Sleeve, 180/180C Governor Bore (Chrome-Moly) 1969-Up | — |
| 066 not on diagram | Part # 24066A | Bushing, 180/180C/4L30E Extension Housing (Tracker Only) 1989-98 | — |
| 066 not on diagram | Part # 44066B | Bushing, 180/180C/4L30E Extension Housing (Bronze)1969-Up | 1 |
| 211 | Part # 24211AB | Washer, 180/180C/4L30E Pump/Center Support .070” (No Tab) 1969-Up | 1 |
| 211 | Part # 24211AC | Washer, 180/180C/4L30E Pump/Center Support .078” (No Tab) 1969-Up | 1 |
| 211 | Part # 24211AD | Washer, 180/180C/4L30E Pump/Center Support .083” (No Tab) 1969-Up | 1 |
| 211 | Part # 24211AE | Washer, 180/180C/4L30E Pump/Center Support .088” (No Tab) 1969-Up | 1 |
| 211 | Part # 24211AG | Washer, 180/180C/4L30E Pump/Center Support .094” (No Tab) 1969-Up | 1 |
| 211 | Part # 24211AH | Washer, 180/180C/4L30E Pump/Center Support .100” (No Tab) 1969-Up | 1 |
| 211 | Part # 24211B | Washer, 180C/4L30E Pump/Center Support .059” (3 Tab) 1987-Up | 1 |
| 211 | Part # 24211BA | Washer, 180C/4L30E Pump/Center Support .067” (3 Tab) 1987-Up | 1 |
| 211 | Part # 24211BB | Washer, 180C/4L30E Pump/Center Support .075” (3 Tab) 1987-Up | 1 |
| 211 | Part # 24211BC | Washer, 180C/4L30E Pump/Center Support .082” (3 Tab) 1987-Up | 1 |
| 211 | Part # 24211BD | Washer, 180C/4L30E Pump/Center Support .090” (3 Tab) 1987-Up | 1 |
| 211 | Part # 24211BE | Washer, 180C/4L30E Pump/Center Support .098” (3 Tab) 1987-Up | 1 |
| 217 | Part # 54217B | Bearing W/Race, 4L30E Overdrive Planet to Overdrive Ring Gear 1989-Up | — |
| 223 | Part # 54223B | Washer, 200-4R Overdrive Ring Gear to Direct Drum Support 1981-90 | 2 |
| 229 | Part # 24229 | Washer, 180/180C/4L30E 2nd Drum to 3rd Drum (Front)(5 Tab Metal) 1969-Up | 1 |
| 229 | Part # 24229A | Washer, 180/180C/4L30E 2nd Drum to 3rd Drum (Front)(Plastic) 1969-Up | 1 |
| 230 | Part # 24230 | Washer, 180/180C/4L30E 2nd Drum to 3rd Drum (Rear) 1969-Up | 1 |
| 231 | Part # 24231 | Race, 180/180C/4L30E 3rd Drum to Sun Gear (Front) 1969-Up | — |
| 232 | Part # 24232 | Bearing, 180/180C/4L30E 3rd Drum to Sun Gear (Rear) 1969-Up | 1 |
| 233 not on diagram | Part # 24233 | Race, 4L30E 3rd Drum to Sun Gear (Rear)(.076”) 1989-Up | — |
| 241 | Part # 24241 | Bearing, 180/180C Sun Gear to Planet (.520”ID) 1969-Up | — |
| 241 | Part # 24241E | Bearing, 4L30E Sun Gear to Planet (.715”ID) 1989-Up | 1 |
| 242 | Part # 24242 | Race, 180/180C Sun Gear to Planet (.520”ID) 1969-Up | 1 |
| 242 | Part # 24242E | Race, 4L30E Sun Gear to Planet (.725”ID) 1989-Up | — |
| 250 | Part # 24250 | Race, 180/180C Sun Gear to Low Drum & Low Drum to Case 1969-Up | — |
| 251 | Part # 24251 | Bearing, 180/180C Sun Gear to Low Drum & Low Drum to Case 1969-Up | 1 |
| 251 | Part # 24251E | Bearing, 4L30E Planet to Low Drum (Stays in Planet) 1989-Up | — |
| 254 | Part # 24254E | Caged Bearing, 4L30E (Stays in Output Shaft) 1989-Up | — |
| 257 | Part # 24257 | Bearing W/Race, 4L30E Low Drum to Case 1989-Up | 1 |
| 660 | Part # 24660 | Inner Race, 4L30E Overdrive Sprag 1989-Up | 1 |
| 665 | Part # 24665 | Outer Race, 180/180C 3rd Clutch Sprag (.505” Thick) 1969-Up | 1 |
| 665 | Part # 24665E | Outer Race, 4L30E 3rd Clutch Sprag (.555” Thick) 1989-Up | — |
| 665 | Part # 24665EA | Outer Race, 4L30E 3rd Clutch Sprag (.530” Thick) 1989-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 026 | Part # 24026 | Band, 180/180C/4L30E Low 1969-Up | 1 |
| 905 not on diagram | Part # 24905 | Servo Assembly, 180/180C Low Band 1969-up | 1 |
| 905 not on diagram | Part # 24905E | Servo Assembly, 4L30E Low Band 1989-up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 520 not on diagram | Part # 24520 | Stator W/Gears, 180 Opel W/Valve 1969-Up | 1 |
| 520 not on diagram | Part # 24520A | Stator W/Gears, 180 Chevy W/Out Valve 1969-80 | — |
| 520 not on diagram | Part # 24520B | Stator W/Gears, 180 Non Lock-Up 1981 | — |
| 520 not on diagram | Part # 24520C | Stator W/Gears, 180C Lock-Up (Uses A No Tab Washer # 211) 1982-86 | 1 |
| 520 not on diagram | Part # 24520CA | Stator W/Gears, 180C Lock-Up (Uses A 3 Tab Washer # 211) 1987-Up | — |
| 520 not on diagram | Part # 24520CB | Stator W/Gears, 180C Lock-Up (Uses A 3 Tab Washer) 1987-Up… | — |
| 520 not on diagram | Part # 24520E | Stator W/Gears, 4L30E (2 Valve Type)(Less Valves) 1989-99 (Cast # 96016689)(Pressure Regulator Valve Is .515”OD) | 2 |
| 520 not on diagram | Part # 24520EA | Stator W/Gears, 4L30E (4 Vlave Type)(Less Valves)(PWM) 2000-Up (Can Use 24520EK With BU40 Converter) | — |
| 520 not on diagram | Part # 24520EK | Pump Conversion Kit, 4L30E (For Axiom & Trooper 2000-04) (Contains: 24750EB, 24520E, 24544E & 24673A)… | — |
| 530 | Part # 24530A | Pump Gears, 180/180C/4L30E .628” Thick 1969-Up | — |
| 530 | Part # 24530AX | Pump Gear Set, 180/180C/4L30E (Oversized) 1969-Up | — |
| 544 | Part # 24544 | Plate, 180 Pump 1969-80 | 1 |
| 544 | Part # 24544B | Plate, 180 Pump Non Lock/Up 1981 | — |
| 544 | Part # 24544C | Plate, 180C Pump Lock-Up (056 Ink Letters) 1982-Up | 1 |
| 544 | Part # 24544CA | Plate, 180C Pump Lock-Up (272 Ink Letters) 1982-Up | — |
| 544 | Part # 24544E | Plate, 4L30E Pump (069 Ink Letters) 1989-Up | 1 |
| 544 | Part # 24544EA | Plate, 4L30E Pump (506 Ink Letters) 1989-Up | — |
| 544 | Part # 24544EAA | Plate, 4L30E Pump (507 Ink Letters) 1989-Up | — |
| 544 | Part # 24544EB | Plate, 4L30E Pump (519 Ink Letters) 1989-Up | — |
| 544 | Part # 24544EC | Plate, 4L30E Pump (521 Ink Letters) 1989-Up | — |
| 544 | Part # 24544ED | Plate, 4L30E Pump (548 Ink Letters) 1989-Up | — |
| 544 | Part # 24544EE | Plate, 4L30E Pump (492 Ink Letters) 1989-Up | — |
| 544 | Part # 24544EH | Plate, 4L30E Pump (630 Ink Letters) 1989-Up | — |
| 544 | Part # 24544EL | Plate, 4L30E Pump (926 Ink Letters) 1989-Up | — |
| 544 | Part # 24544ELA | Plate, 4L30E Pump (923 Ink Letters) 1989-Up | — |
| 544 | Part # 24544EN | Plate, 4L30E Pump (995 Ink Letters) 1989-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 24100 | Friction, 4L30E 4th Clutch .086” 1989-Up | 1 |
| 104 | Part # 24104 | Friction, 180/180C/4L30E 2nd Clutch .097” 1969-Up | 1 |
| 106 | Part # 24106 | Friction, 180/180C/4L30E 3rd Clutch .100” 1969-Up | 1 |
| 106 | Part # 24106A | Friction, 4L30E 3rd Clutch .063” 1998-Up | — |
| 110 | Part # 24110 | Friction, 180/180C/4L30E Reverse Clutch .095” 1969-Up | 1 |
| 116 | Part # 24116 | Friction, 4L30E Overrun Clutch .086” 1989-Up | 1 |
| 119 not on diagram | Part # 24119 | Friction Module, 180/180C 1969-Up | — |
| 119 not on diagram | Part # 24119E | Friction Module, 4L30E 1989-97 | — |
| 119 not on diagram | Part # 24119EB | Friction Module, 4L30E 1998-Up | — |
| 120 | Part # 24120 | Steel, 4L30E 4th Clutch .080” 1989-Up | 1 |
| 124 | Part # 24124 | Steel, 180/180C/4L30E 2nd Clutch .083” 1969-Up | 1 |
| 124 | Part # 24124A | Steel, 180/180C/4L30E 2nd Clutch .070” 1969-Up | 1 |
| 126 | Part # 24126 | Steel, 180/180C/4L30E 3rd Clutch .083” 1969-Up | 1 |
| 126 | Part # 24126A | Steel, 180/180C/4L30E 3rd Clutch .070” 1969-Up | 1 |
| 130 | Part # 24130 | Steel, 180 Reverse Clutch .070” 1969-Up | 1 |
| 130 | Part # 24130A | Steel, 180/180C/4L30E Reverse Clutch .083” 1969-Up | 1 |
| 136 | Part # 24136 | Steel, 4L30E Overrun Clutch .082” 1989-Up | 1 |
| 139 not on diagram | Part # 24139 | Steel Module, 180/180C 1969-Up | — |
| 139 not on diagram | Part # 24139E | Steel Module, 4L30E 1989-Up | — |
| 140 | Part # 24140 | Spacer Plate, 4L30E 4th Clutch (Aluminum) 1989-Up | — |
| 150 | Part # 24150 | Spacer Plate, 180/180C Reverse Clutch (3/4” Thick)(Aluminum) 1969-Up | 1 |
| 150 | Part # 24150E | Spacer Plate, 4L30E Reverse Clutch (1 3/16” Thick)(Aluminum) 1989-Up | — |
| 156 | Part # 24156 | Pressure Plate, 4L40E Overrun Clutch .200” 1989-Up | — |
| 851 | Part # 24851 | Cushion, 4L30E Overrun Clutch 1989-Up | — |
| 852 | Part # 24852 | Cushion, 180/180C/4L30E 2nd Clutch 1969-Up | 1 |
| 854 | Part # 24854 | Cushion, 180/180C/4L30E Reverse Clutch 1969-Up | 1 |
| 858 | Part # 24858 | Cushion, 180/180C 3rd Clutch 1969-Up | 1 |
| 858 | Part # 24858E | Cushion, 4L30E 3rd Clutch 1989-Up | — |
| 907 | Part # 24907 | Piston, 180/180C Low Servo 1969-Up | 1 |
| 907 | Part # 24907E | Piston, 4L30E Low Servo 1989-Up | 1 |
| 960 | Part # 24960 | Piston, 4L30E 4th Clutch 1989-Up | 1 |
| 961 | Part # 24961 | Piston, 4L30E Overrun Clutch (Bonded) 1989-Up | 1 |
| 962 | Part # 24962 | Piston, 180/180C 2nd Clutch (1.540” Overall Thickness)1969-Up | 1 |
| 962 | Part # 24962A | Piston, 180/180C/4L30E 2nd Clutch (1.250” Overall Thickness) 1969-Up | — |
| 965 | Part # 24965 | Piston, 180/180C 3rd Clutch 1969-Up | 1 |
| 966 | Part # 24966 | Piston, 180/180C Reverse Clutch (1 1/2” Thick) 1969-Up | 1 |
| 966 | Part # 24966A | Piston, 180/180C Reverse Clutch (1 5/8” Thick) 1969-Up | — |
| 966 | Part # 24966E | Piston, 4L30E Reverse Clutch (1 5/16” Thick) 1989-Up | 1 |
| 971 | Part # 24971 | Spring, 4L30E Overrun Clutch Return 1989-Up | 1 |
| 972 | Part # 24972 | Spring, 180/180C/4L30E 2nd Clutch Return 1969-Up | 1 |
| 975 | Part # 24975 | Spring, 180/180C/4L30E 3rd Clutch Return 1969-Up | — |
| 976 | Part # 24976 | Spring, 180/180C Reverse Clutch Return 1969-Up | — |
| 976 | Part # 24976E | Spring, 4L30E Reverse Clutch Return 1989-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 551 | Part # 24551 | Drum, 4L30E Overrun Clutch (2 Clutch) 1989-Up | 1 |
| 552 | Part # 24552 | Drum, 180 2nd Clutch 1969-78 | 1 |
| 552 | Part # 24552A | Drum, 180/180C 2nd Clutch (.100” From Snap Ring #874 To Surface Where Washer #229 Rides) 1979-Up (Can Use 24552EK) | — |
| 552 | Part # 24552E | Drum, 4L30E 2nd Clutch (.160” From Snap Ring #874 To Surface Where Washer #229 Rides) 1989-Up | — |
| 555 | Part # 24555 | Drum W/Shaft, 180 3rd Clutch (Shaft Has A Pilot) 1969-80 | 1 |
| 555 | Part # 24555A | Drum W/Shaft, 180C 3rd Clutch (Lock-Up) 1981-Up | — |
| 555 | Part # 24555AA | Drum W/Shaft, 180 3rd Clutch (Non-Lock-Up) 1981(No Ck Ball in Shaft) | — |
| 555 | Part # 24555E | Drum W/Shaft, 4L30E 3rd Clutch (W/3 1/2” Long Shaft) 1989-Up | 1 |
| 557 | Part # 24557 | Drum, 180/180C Low Band W/Sun Gear Assembly (35 Teeth) 1969-Up | 1 |
| 557 | Part # 24557B | Drum, 180/180C/4L30E Low Band W/Sun Gear Assembly (42 Teeth) 1969-Up | — |
| 557 | Part # 24557E | Drum, 4L30E Low Band (Less Rear Sun Gear But Uses A 42 Teeth Sun Gear # 614) 1989-Up | 1 |
| 557 | Part # 24557EA | Drum, 4L30E Low Band With Sun Gear Assembly (46 Teeth) 1989-Up | — |
| 580 | Part # 24580 | Planet, 4L30E Overdrive (31 Teeth Sun Gear # 610) 1989-Up | 1 |
| 584 | Part # 24584 | Planet, 180/180C W/13 3/4” Output Shaft (3 Gear)(25 Teeth Sun Gear # 612) 1969-Up | 1 |
| 584 | Part # 24584A | Planet, 180/180C W/13 3/4” Output Shaft (4 Gear)(25 Teeth Sun Gear # 612) 1969-Up | — |
| 584 | Part # 24584AA | Planet, 180/180C W/12” Output Shaft (3 Gear)(30 Teeth Sun Gear # 612) 1969-Up | — |
| 584 | Part # 24584AB | Planet, 180/180C W/13 3/4” Output Shaft (3 Gear)(30 Teeth Sun Gear # 612) 1969-Up | — |
| 584 | Part # 24584AG | Planet, 180C W/8” Output Shaft (3 Gear)(30 Teeth Sun Gear # 612)(Geo Tracker 4x4) | — |
| 584 | Part # 24584AT | Planet, 180/180C W/8 1/2” Output Shaft (3 Gear)(30 Teeth Sun Gear # 612) 1969-UP | — |
| 584 | Part # 24584B | Planet, 180 W/Output Shaft (Fiat) | — |
| 584 | Part # 24584C | Planet, 180 W/Output Shaft (Peugeot) | — |
| 584 | Part # 24584DA | Planet, 4L30E With 10 1/8” Long Output Shaft (4 Gear)(46 Teeth Sun Gear # 614)(No Pilot On Rear Of Shaft)… | — |
| 584 | Part # 24584E | Planet, 4L30E W/8” Output Shaft 4X4 (4 Gear)(46 Teeth Sun Gear # 614) 1989-Up | 1 |
| 584 | Part # 24584EA | Planet, 4L30E W/8 3/8” Output Shaft 4X4 (4 Gear)(42 Teeth Sun Gear # 614) 1989-Up | — |
| 584 | Part # 24584G | Planet, 4L30E W/11 1/2” Output Shaft (4 Gear)(42 Teeth Sun Gear # 614) 1989-Up (With .550”OD Pilot On Raer Of Shaft)… | — |
| 584 | Part # 24584GA | Planet, 4L30E W/11 1/2” Output Shaft (4 Gear)(46 Teeth Sun Gear # 614) 1989-Up (.550”OD Pilot On Rear Of Shaft)… | — |
| 584 | Part # 24584GB | Planet, 4L30E W/11 1/2” Long Output Shaft (4 Gear)(46 Teeth Sun Gear # 614)(.630”OD Pilot On Rear Of Shaft)… | — |
| 590 | Part # 24590 | Ring Gear, 4L30E Overdrive Planet (31 Teeth Sun Gear # 610) 1989-Up | 1 |
| 594 | Part # 24594 | Ring Gear, 180/180C Planet (73 Teeth)(25 Teeth Sun Gear # 612) 1969-Up | 1 |
| 594 | Part # 24594E | Ring Gear, 180C/4L30E Rear Planet (90 Teeth)(30 Teeth Sun Gear # 612) 1989-Up | 1 |
| 610 | Part # 24610 | Sun Gear, 4L30E Overdrive Planet (31 Teeth) 1989-Up | 1 |
| 612 | Part # 24612 | Sun Gear, 180/180C W/Inner Race (25 Teeth) 1969-86 | 1 |
| 612 | Part # 24612E | Sun Gear, 4L30E W/Inner Race (30 Teeth) W/Pilot 1989-Up | 1 |
| 612 | Part # 24612EA | Sun Gear, 180C W/Inner Race (30 Teeth) No Pilot 1987-Up | — |
| 614 | Part # 24614E | Sun Gear, 4L30E Rear (46 Teeth, W/Out Low Drum) 1989-Up | 1 |
| 614 | Part # 24614EA | Sun Gear, 4L30E Rear (42 Teeth, W/Out Low Drum) 1989-Up | — |
| 630 | Part # 24630 | Center Support, 4L30E (Cast # 069 DD2)(W/1 Valve)(Uses a No Tab Washer # 211) | 2 |
| 630 | Part # 24630A | Center Support, 4L30E (Cast # 069 DD1)(W/2 Valves)(Uses a 3 Tab Washer # 211) | 1 |
| 630 | Part # 24630AA | Center Support, 4L30E (Cast # 069 )(W/1 Valve )(Uses a 3 Tab Washer # 211) | 1 |
| 630 | Part # 24630B | Center Support, 4L30E (Cast # 513 FU )(W/2 Valves)(Uses a No Tab Washer # 211) | 1 |
| 630 | Part # 24630BA | Center Support, 4L30E (Cast # 513 FU )(W/1 Valve)(Uses a No Tab Washer # 211) | 1 |
| 630 | Part # 24630BC | Center Support, 4L30E (Cast # 513 FU )(W/1 Valve)(Uses a 3 Tab Washer # 211) | 1 |
| 630 | Part # 24630BD | Center Support, 4L30E (Cast # 513 )(W/2 Valves)(Uses a 3 Tab Washer # 211) | 1 |
| 631 | Part # 24631 | Plate, 4L30E Overdrive Case to Center Support 1989-Up | 1 |
| 650 | Part # 54650B | Sprag, 200-4R Overdrive 1981-90 | 1 |
| 654 | Part # 24654 | Sprag, 180 3rd Clutch (16 Elements) 1969-Up | 1 |
| 654 | Part # 24654A | Sprag, 180/180C/4L30E 3rd Clutch (26 Elements)(Use 74658) 1969-Up | — |
| 673 | Part # 24673 | Turbine Shaft, 4L30E (10 1/8” Long) (Without Check Valve) 2000-Up | 1 |
| 673 | Part # 24673A | Turbine Shaft, 4L30E (10 1/8” Long) (With Check Valve) 1989-99 | — |
| 685 | Part # 24685 | Support, 180/180C Governor (W/Park Gear) 1969-Up | — |
| 685 | Part # 24685E | Support, 4L30E Rear (1 Ring) 1989-Up | 1 |
| 750 not on diagram | Part # 24750 | Bell Housing, 180 (Chevette) 1969-80 | — |
| 750 not on diagram | Part # 24750A | Bell Housing, 180/180C (Chevette) 1981-Up | 1 |
| 750 not on diagram | Part # 24750B | Bell Housing, 180C (Isuzu, Trooper) 1981-Up | — |
| 750 not on diagram | Part # 24750C | Bell Housing, 4L30E (Top Bolts 4 7/8”)(Passenger Side Starter) 1989-Up | — |
| 750 not on diagram | Part # 24750E | Bell Housing, 4L30E (Top Bolts 5 1/8”)(Drivers Side Starter)… | 1 |
| 750 not on diagram | Part # 24750EA | Bell Housing, 4L30E (Top Bolts 5 1/8”)(Drivers Side Starter)… | — |
| 750 not on diagram | Part # 24750EB | Bell Housing, 4L30E (Top Bolts 5 1/8”) Drivers Side Starter (With 1 Threaded Boss Under Starter)… | — |
| 750 not on diagram | Part # 24750EC | Bell Housing, 4L30E (Top Bolts 5 1/8”) Drivers Side Starter (With 1 Threaded Boss Under Starter)… | — |
| 750 not on diagram | Part # 24750G | Bell Housing, 4L30E (Top Bolts 4 7/16”)(Drivers Side Starter At 1:00)(BMW)(Cast # 96016284) | 1 |
| 750 not on diagram | Part # 24750GA | Bell Housing, 4L30E (Top Bolts 4 7/16”)(Drivers Side Starter At 1:00)(BMW)(Cast # 96017562) | 1 |
| 760 | Part # 24760 | Case, 180 (Opel & Chevette) 1969-80 | — |
| 760 | Part # 24760A | Case, 180 Non Lock-Up (Chevette) 1981 | — |
| 760 | Part # 24760B | Case, 180C Lock-Up (Chevette)1982-Up (Shift Lever Is On The Drivers Side) | 1 |
| 760 | Part # 24760BA | Case, 180C Lock-Up (Post Office Vehicle) | — |
| 760 | Part # 24760BB | Case, 180C Lock-Up (Tracker/Rodeo)(Shift Lever Is On The Passengers Side)(With 3 Bolt Shield Around Governor Bore) | — |
| 760 | Part # 24760E | Case, 4L30E (Case Connector Hole Is .870”ID On Drivers Side)(With Dipstick Hole On Passengers Side) 1989-Up | 1 |
| 760 | Part # 24760EA | Case, 4L30E (Case Connector Hole Is 1.040”ID On Passengers Side) | — |
| 760 | Part # 24760EC | Case, 4L30E (Case Connector Hole Is 1.040”ID On Drivers Side) (Has No Dipstick Hole) (Linkage Is On Drivers Side) | — |
| 760 | Part # 24760EF | Case, 4L30E (Case Connector Hole Is 1.060”ID On Drivers Side)(Has No Dipstick Hole) (Linkage Is On Drivers Side) | — |
| 762 | Part # 24762 | Overdrive Case, 4L30E (Cast # 96014955) 1989-Up | 2 |
| 762 | Part # 24762A | Overdrive Case, 4L30E (Cast # 96017506)(W/Hole For Electrical Connector) 1989-Up | 1 |
| 762 | Part # 24762AA | Overdrive Case, 4L30E (Cast # 96017506)(No Electrical Connector Hole) 1989-Up | 1 |
| 762 | Part # 24762B | Overdrive Case, 4L30E (BMW)(Uses A 3-4 Accumulator Cover That Has No O-Ring Grooves)… | 1 |
| 770 | Part # 24770 | Extension Housing, 180/180C (Chevette) 1969-Up | 1 |
| 770 | Part # 24770A | Extension Housing, 180C (9” Long)(Post Office Vehicle) | — |
| 770 | Part # 24770AG | Extension Housing, 180C (7 3/8” Long)(1 Bolt Mount)(Tracker) | — |
| 770 | Part # 24770D | Extension Housing, 4L30E 2WD (4 5/8” Long)(Bearing Type, W/Speed Sensor on Top) | — |
| 770 | Part # 24770DA | Extension Housing, 4L30E 2WD (4 5/8” Long)(Bearing Type, W/Speed Sensor on Drivers Side) | — |
| 770 | Part # 24770E | Extension Housing, 4L30E 4X4 (Isuzu)(Cast # 9601527G) 1989-Up | 1 |
| 770 | Part # 24770EA | Extension Housing, 4L30E 4X4 (2 13/16” Thick)(Cast # 98015270) 1989-Up | 1 |
| 770 | Part # 24770EB | Extension Housing, 4L30E 4X4 (2 1/2” Thick)(Cast # 96014096) 1989-Up | 1 |
| 774 | Part # 44774 | Housing, 200/200C Speed-O 7/8” Steel (Use in Place of 7/8” Aluminum) 1976-Up | 1 |
| 774 | Part # 44774A | Speed-O Housing, 180/180C 7/8” Aluminum (For Rubber Seal) 1970-Up | 1 |
| 847 | Part # 24847 | Gear, 180/180C Speed-O Drive 1969-Up | 1 |
| 847 | Part # 24847EA | Gear, 4L30E Speed-O Drive (7 Teeth) Plastic (With 2 Ears) Drives Off Of The 24681EA | — |
| 848 | Part # 24848 | Gear, 180/180C Speed-O Driven 1969-Up | — |
| 909 | Part # 24909 | Cover, 180/180C Low Servo 1969-Up | 1 |
| 909 | Part # 24909E | Cover, 4L30E Low Servo 1989-Up | 1 |
| 939 | Part # 24939A | Cover, 4L30E 3-4 Accumulator (Bonded Rubber) 1994-Up | — |
| 995 not on diagram | Part # 24995 | Park Pawl W/Spring, 180/180C 1969-Up | 1 |
| 995 not on diagram | Part # 24995E | Park Pawl W/Spring, 4L30E 1989-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 162 not on diagram | Part # 44162 | Hose, 180/180C Modulator (Elbow) 1969-Up | 1 |
| 163 not on diagram | Part # 24163-1 | Sleeve, 180/180C (Aluminum, For Valve Under Modulator) 1969-Up | 1 |
| 164 not on diagram | Part # 24164 | Pin, 180/180C Modulator 1969-Up | 1 |
| 447 not on diagram | Part # 24447EC | Interceptor, 4L30E 1989-Up | — |
| 447 not on diagram | Part # 34447 | Recalibrator, 4L30E (Electronic Speedometer) | — |
| 487 not on diagram | Part # 44487 | E-Clip, GM | 1 |
| 490 not on diagram | Part # 44490 | Case Vent Tube, 42RLE | 1 |
| 494 | Part # T44494R | Filler Tube & Dip Stick, GM (Fitz All, Teckpak) | 1 |
| 507 not on diagram | Part # S24507C-2 | Sleeve, 4L30E TCC Regulator Valve Sleeve (Sonnax)(For PWM Only, Does Not Require Machining) | — |
| 698 not on diagram | Part # 24698E | Oil Baffle, 4L30E (Goes In The Overdrive Case Under The #631 Plate) (Plastic, Looks Like A Cork Screw) | — |
| 842 not on diagram | Part # 24842 | Bracket, 180/180C Speed-O Gear Housing 1969-Up | — |
| 849 not on diagram | Part # 24849 | Clip, 180/180C Speed-O Gear 1969-Up | 1 |
| 862 | Part # 24862 | Snap Ring, 4L30E Holds 4th Clutch Retainer to Overdrive Case 1989-Up | 1 |
| 863 | Part # 24863 | Snap Ring, 4L30E Holds Overrun Pressure Plate in Drum 1989-Up | 1 |
| 865 | Part # 24865 | Snap Ring, 4L30E Holds Overdrive Sprag Inner Race To Overrun Drum 1989-Up | 1 |
| 872 | Part # 24872 | Snap Ring, 180/180C/4L30E Holds Apply Ring to 2nd Drum 1969-Up | 1 |
| 874 | Part # 24874 | Snap Ring, 180/180C/4L30E Holds Retainer to 2nd Drum 1969-Up | 1 |
| 878 | Part # 24878 | Snap Ring, 180/180C/4L30E Holds Outer Race to 3rd Drum 1969-Up | 1 |
| 879 | Part # 24879 | Snap Ring, 180/180C/4L30E Holds Retainer to 3rd Drum 1969-Up | 1 |
| 880 | Part # 24880 | Snap Ring, 4L30E Holds Overdrive Planet to Turbine Shaft 1989-Up | 1 |
| 887 not on diagram | Part # 44887 | Snap Ring, 125/125C Holds Speed-O Seal in Speed-O Housing 1980-Up | — |
| 893 | Part # 24893 | Snap Ring, 180/180C Holds Reverse Spring Retainer to Stator 1969-Up | 1 |
| 893 | Part # 24893E | Snap Ring, 4L30E Holds Reverse Spring Retainer to Overdrive Case 1989-Up | — |
| 894 | Part # 24894 | Snap Ring, 180/180C Holds Governor Support to Output Shaft 1969-Up | 1 |
| 894 | Part # 24894E | Snap Ring, 4L30E Holds Governor Support To Output Shaft 1989-Up | — |
| 895 | Part # 24895 | Snap Ring, 4L30E Holds Electric Pick-Up to Output Shaft 1989-Up | 1 |
| 896 not on diagram | Part # 24896 | Snap Ring, 180/180C Holds Low Servo Piston In 1969-Up | — |
| 896 not on diagram | Part # 24896E | Snap Ring, 4L30E Holds Low Servo Piston In 1989-Up | — |
| 899 | Part # 24899E | Snap Ring, 4L30E Holds 4th Accumulator In Overdrive Case 1989-Up | — |
| 906 | Part # 24906 | Spring, 180/180C Low Servo 1969-Up | — |
| 906 | Part # 24906E | Spring, 4L30E Low Servo 1989-Up | — |
| 958 | Part # 24958 | Apply Ring, 180/180C 2nd Clutch (2 1/8” Tall) 1969-Up | 1 |
| 958 | Part # 24958D | Apply Ring, 4L30E 2nd Clutch (1 3/8” Tall) 1989-Up | — |
| 958 | Part # 24958E | Apply Ring, 4L30E 2nd Clutch (1 1/2” Tall) 1989-Up | 1 |
| 958 | Part # 24958EA | Apply Ring, 4L30E 2nd Clutch (1 7/8” Tall) 1989-Up | — |
| 970 | Part # 24970 | Retainer W/Spring, 4L30E 4th Clutch Return 1989-Up | 1 |
| 981 | Part # 24981 | Retainer, 4L30E Overrun Clutch Spring 1989-Up | 1 |
| 982 | Part # 24982 | Retainer, 180/180C/4L30E 2nd Clutch Spring 1969-Up | 1 |
| 985 | Part # 24985 | Retainer, 180/180C/4L30E 3rd Clutch Spring 1969-Up | 1 |
| 986 | Part # 24986 | Retainer, 180/180C Reverse Clutch Spring 1969-Up | 1 |
| 986 | Part # 24986E | Retainer, 4L30E Reverse Clutch Spring 1989-Up | — |
| 991 not on diagram | Part # 24991 | Linkage Assembly, 180/180C Internal 1969-Up | — |
| 991 not on diagram | Part # 24991E | Linkage Assembly, 4L30E Internal 1989-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.