Home / Transmissions / Getrag / 7DCI600
Getrag Source-verified model

Getrag 7DCI600 (GS7D36SG) Transmission

The automatic transmission GS7D36SG was designed by 2008 for BMW vehicles with engines having the torque up to 400 Nm. This transmission has 7 speeds and minimum possible 100 ms of the torque disruption. This transmission also named as M-DCT and DSG-7 BMW. Initially this transmission was installed on rare BMW M3, Z4. After testing, computer adjustment, improvement of the cooling system this transmission was offered for cars of E90/92/93 series, and later for E82/88 series. In addition to impressive characteristics of the acceleration dynamics this transmission has a solid reserve in…

Speeds 7
Type DCT
Drive RWD
Max torque 400
ATF capacity (L) 9,5
ATF change (L) 5
ATF type 83222148578
Find transmission shops
Contribute info

This feature is in progress and will be available soon.

Report a mistake on this page
7DCI600
4.1/10
Support & Market Presence Index
Limited presence

How widely this transmission is used, documented and supported across the Go4Trans graph.

Market presence1.8
Documentation depth9.5
Knowledge & support2.5
Sell 7DCI600 parts on Go4TransStart selling →

Vehicle fitment explorer

Confirmed vehicle applications. Every row is drawn from our source-verified fitment database.

4 applications · 1 make · 2008–2012 BMW 4

Make Model Year Drive Engine
BMW SÉRIE 1 2010-2012 7 Spd RWD L6 3.0L
BMW SÉRIE 3 2008-2012 7 Spd R/AWD L6 3.0L V8 4.0L
BMW SÉRIE 5 2011-2012 7 Spd R/AWD V8 4.4L
BMW SÉRIE 6 7 Spd R/AWD V8 4.4L

Other and alternative codes of this transmission

+ Contribute

This feature is in progress and will be available soon.

7DCI600
GS7D36SG
verified naming OEM designation source name

Common problems & symptoms

Problems and symptoms reported for this transmission, compiled from repair sources. Not a complete list.

!
Friction Component Burnout
Friction discs burn out when operation rules are violated; requires correct positioning for efficient cooling.
!
Friction Lining Wear Increase
Friction lining wear increases clearances in clutch pack, leading to improper gear shifting behavior.
?
Improper Gear Shifting
Transmission shifts gears improperly due to increased clearances caused by friction lining wear.
!
Incorrect Friction Disc Positioning
Improper installation positioning of friction components against steel discs reduces cooling efficiency and causes damag
!
ATF Degradation No Change
Manufacturer states no ATF change needed for service life, but specialists recommend changes to prolong lifespan.
!
Cooling System Overheating Risk
Transmission has overheating protection systems; early models required cooling system improvement before wider deploymen
?
Torque Disruption During Shifts
Minimum 100ms torque disruption occurs during gear changes; abnormal disruption may indicate control or clutch issues.
Know a symptom and its fix?
Share the symptom, how it was fixed and the part that solved it. We review every submission before publishing.
Contribute a symptom

This feature is in progress and will be available soon.

About this transmission

Transmission general data

The automatic transmission GS7D36SG was designed by 2008 for BMW vehicles with engines having the torque up to 400 Nm. This transmission has 7 speeds and minimum possible 100 ms of the torque disruption. This transmission also named as M-DCT and DSG-7 BMW. Initially this transmission was installed on rare BMW M3, Z4. After testing, computer adjustment, improvement of the cooling system this transmission was offered for cars of E90/92/93 series, and later for E82/88 series. In addition to impressive characteristics of the acceleration dynamics this transmission has a solid reserve in durability (for 100 thousand kilometers).

Technical issues and repair guidelines

Manuals say that it is not necessary to change ATF for this transmission during the whole service life of this unit, but repair specialists recommend to perform this procedure to prolong the lifespan of this transmission. This transmission has all modern security systems from overheating. Friction components are selected with steel discs for each type of engines, require correct positioning during installation (for efficient cooling),violation and get burnt in case of violation of operation rules. The friction lining wear-out increases clearances in the package and the transmission starts shifting gears improperly. Before replacement of friction components it is recommended to consult an authorized DSG BMW service, because it may be possible to adjust shifting with worn-out frictions with the use of software.

Sources & Contribution

+ Contribute

This feature is in progress and will be available soon.

Every claim on this page is backed by a structured source record — including community contributions, each with its own reference.

No sources added yet
Be the first to document this transmission.
Add a source

This feature is in progress and will be available soon.

Contribute transmission data

Go4Trans grows as a community knowledge graph. Help make the 7DCI600 record more complete — every submission is reviewed before publication.

Contribute data

This feature is in progress and will be available soon.

Report a mistake on this page

This feature is in progress and will be available soon.

✓ Reviewed by our editorial team before going live
✓ Accepted contributions are credited in the Sources list
📋 Alias or code variant
🔩 Part number & fitment
🚗 Vehicle application
🏪 Repair shop listing
📖 Technical article
⚠ Problem report