TAAT parts diagram
Transmission page:
Positions:
99 total, 76 on the diagram
Parts:
144 total, 55 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 10000A | Paper & Rubber Kit, Saturn (With Out Bonded Pistons) 1991-Up | — |
| 002 not on diagram | Part # 10002A | Overhaul Kit, Saturn (For Bonded Pistons Sell A10962AK) 1991-Up | — |
| 004 not on diagram | Part # 10004AP | Use 10006AP (Frictions & Steels Are 1 Sided) There Is No Less Steels Kit | — |
| 006 not on diagram | Part # 10006A | Master W/Steels Kit, Saturn (For Bonded Pistons Sell A10962AK) 1991-Up | — |
| 030 not on diagram | Part # 10030A | Bushing Kit, Saturn 1991-Up | — |
| 175 not on diagram | Part # 10175A | Ring Kit, Saturn 1991-Up | — |
| 446 not on diagram | Part # 10446A | Repair Kit, Saturn Wire Harness (External)(Rostra) 1995-Up | — |
| 507 not on diagram | Part # 10507A-4K | Retainer/Clip Kit, Saturn Lube Relief Valve (Has 3 Retainers & 3 Clips) Fixes 3 Transmissions | — |
| 562 not on diagram | Part # 10562A | Piston Kit, Saturn For 2nd, 3rd & 4th Clutch Drums | — |
| 564 not on diagram | Part # 10564A | Piston Kit, Saturn 1st Clutch Drum | — |
| 741 not on diagram | Part # S10741PK | Sure Cure Kit, Saturn (TAAT) (Sonnax) (Use Tool # T-95200-TL) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 10529A | Converter Reactor, Saturn (Stator Tube) 18 Splines | 1 |
| 529 | Part # 10529B | Converter Reactor, Saturn (Stator Tube) 29 Splines (4 1/2” Long) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 not on diagram | Part # 10421A | Actuator, Saturn Shift (Solenoid) Blue Top 1991-92 | 1 |
| 421 not on diagram | Part # 10421AA | Actuator, Saturn Shift (Solenoid) Red Top 1993-96 | 1 |
| 421 not on diagram | Part # 10421AB | Actuator, Saturn Shift (Solenoid) Red Top 1997-Up | — |
| 421 not on diagram | Part # 10421AC | Actuator, Saturn Shift (Solenoid) White Top 1997-02 | — |
| 740 not on diagram | Part # 10740A | Valve Body, Saturn 1st Design (With TCC Enable Valve In Lower Valve Body Section) 1991-92 Has A Flat Area On Manual… | 1 |
| 740 not on diagram | Part # 10740AA | Valve Body, Saturn 2nd Design (No TCC Enable Valve In Lower Valve Body Section) 1992-93 No Plastic End On Manual Shaft | — |
| 740 not on diagram | Part # 10740B | Valve Body, Saturn 3rd Design 1994-Up (With Plastic End On Manual Valve) 1992-02… | 1 |
| 741 not on diagram | Part # S10741P-1 | Valve, Saturn Pressure Regulator | — |
| 741 not on diagram | Part # S10741P-1AK | Valve & Sleeve Assembly, Saturn Pressure Regulator Boost (Type 2 Valve Body) 2 O-Ring Type (Sonnax) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 10410A | Neutral Switch, Saturn | 1 |
| 410 | Part # 10410AB | Neutral Switch, Saturn (SL2) 1995 | — |
| 436 not on diagram | Part # 10436A | Sensor, Saturn Output Speed (VSS) & Input Speed | — |
| 437 not on diagram | Part # 10437A | Sensor, Saturn Oil Temperature (2 Prong) | — |
| 438 not on diagram | Part # 10438A | Replaced by 10436A | — |
| 444 not on diagram | Part # 10444A | Connector, Saturn Actuator 1991-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 10010A | Filter, Saturn Sump (Internal) 1991-Up | 1 |
| 013 | Part # 10013A | Filter, Saturn (Spin-On) External 1991-Up | 1 |
| 015 not on diagram | Part # 10015 | Filter, Saturn TAAT Solenoid (Large) 1991-04 | — |
| 017 not on diagram | Part # 10017 | Filter, Saturn Thimble Screen (Large) 1991-Up | — |
| 767 | Part # 10767A | Pan, Saturn Top (13 Bolt) 1991-96 | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 10070A | Seal, Saturn Front 1991-Up3 | 1 |
| 072 | Part # 10072A | Seal, Saturn Linkage Shaft | 1 |
| 074 not on diagram | Part # 10074A | Seal, Saturn Rear CoverTo Pinion Shaft Pilot (Black Plastic) | 1 |
| 076 | Part # 10076AA | Seal, Saturn Left Axle (Case Side)(3.120”OD On Flange) | 1 |
| 077 | Part # 10077A | Seal, Saturn Right Axle (Bell Housing Side)(2.415”OD On Flange) | — |
| 077 | Part # 10077AB | Seal, Saturn Right Axle (Bell Housing Side) (With Rock Shield) | — |
| 195 | Part # 10195AT | Ring, Saturn Servo Piston (Teflon) 1991-04 | 1 |
| 302 | Part # 10302A | Gasket, Saturn Top Pan 1991-96 | 1 |
| 302 | Part # 10302BW | Gasket, Saturn Top Pan (Molded Rubber) 1997-02 | — |
| 304 | Part # 10304A | Gasket, Saturn Rear Cover To Case 1991-Up | 1 |
| 318 | Part # 10318A | Gasket, Saturn Bell Housing To Case 1991-Up | 1 |
| 320 not on diagram | Part # 10320A | Gasket, Saturn Valve Body Spacer Plate (Upper & Lower) (Takes 2) 1993-96 | — |
| 320 not on diagram | Part # 10320B | Gasket, Saturn Valve Body Spacer Plate (Upper & Lower) (Takes 2) 1997-04 | — |
| 374 | Part # 10374A | O-Ring, Saturn Idler Gear Shaft (Takes 2) 1991-04 | — |
| 741 not on diagram | Part # A10741C-9 | O-Ring, Saturn (TAAT) TCC Shift Valve Plunger (Small) 1991-04 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 047 | Part # 10047A | Bushing, Saturn Mainshaft (Rear) (Also Fits Countershaft (Rear) # 052) 1991-Up | — |
| 052 | Part # 10052A | Replaced by 10047A | — |
| 208 | Part # 10208A | Washer, Saturn Under Counter Shaft Nut | — |
| 211 | Part # 10211A | Bearing, Saturn Converter Nut To Bell Housing | — |
| 214 | Part # 10214A | Roller Bearing, Saturn Converter Reactor To Mainshaft | — |
| 217 | Part # 10217A | Thrust Bearing, Saturn Mainshaft To 3rd Gear | — |
| 220 | Part # 10220A | Roller Bearing, Saturn 3rd Gear To Mainshaft | — |
| 223 | Part # 10223A | Thrust Bearing, Saturn 3rd Gear To 2nd/3rd Drum | — |
| 226 | Part # 10226A | Race, Saturn 3rd Gear To 2nd/3rd Drum | — |
| 229 | Part # 10229A | Race, Saturn 2nd/3rd Drum To 2nd/Reverse Gear | — |
| 232 | Part # 10232A | Thrust Bearing, Saturn 2nd/3rd Drum To 2nd/Reverse Gear | — |
| 236 | Part # 10236A | Roller Bearing, Saturn 2nd/Reverse Gear To Collar | — |
| 238 | Part # 10238A | Thrust Bearing, Saturn 2nd/Reverse Gear To Ball Bearing | — |
| 238 | Part # 10238AA | Thrust Bearing With Race, Saturn 2nd/Reverse Gear To Ball Bearing | — |
| 241 | Part # 10241A | Ball Bearing, Saturn Mainshaft To Case | — |
| 243 | Part # 10243A | Thrust Washer, Saturn Ball Bearing To 1st Gear (Mainshaft) | — |
| 247 | Part # 10247A | Roller Bearing, Saturn 1st Gear To Mainshaft | — |
| 251 | Part # 10251A | Thrust Bearing, Saturn 1st Gear To 1st Clutch Drum (Mainshaft) | — |
| 252 | Part # 10252A | Race, Saturn 1st Gear To 1st Clucth Drum (Mainshaft) | — |
| 254 | Part # 10254A | Roller Bearing, Saturn Bell Housing To Countershaft | — |
| 256 | Part # 10256A | Race, Saturn 4th Clutch Drum To 4th Gear (Countershaft) | — |
| 257 | Part # 10257A | Thrust Bearing, Saturn 4th Clutch Drum To 4th Gear (Countershaft) And 4th Gear To 3rd Gear (Countershaft) | — |
| 260 | Part # 10260A | Roller Bearing, Saturn 4th Gear To Countershaft | — |
| 268 | Part # 10268A | Roller Bearing, Saturn 2nd Gear To Countershaft (1.575”OD) | — |
| 268 | Part # 10268B | Roller Bearing, Saturn 2nd Gear To Countershaft (1.810”OD) | — |
| 269 | Part # 10269A | Race, Saturn Collar To 2nd Gear (Countershaft) | — |
| 271 | Part # 10271A | Roller Bearing, Saturn Reverse Gear To Countershaft | — |
| 273 | Part # 10273A | Race, Saturn Reverse Gear To Ball Bearing (Countershaft) | — |
| 274 | Part # 10274A | Ball Bearing, Saturn Countershaft To Case | — |
| 283 | Part # 10283A | Roller Bearing, Saturn Reverse Idler Gear To Shaft | — |
| 285 | Part # 10285A | Roller Bearing, Saturn 1st Gear To Inner Sprag Race (Countershaft) | — |
| 289 | Part # 10289A | Ball Bearing, Saturn Differential (Both Sides) | — |
| 662 | Part # 10662A | Inner Race, Saturn Sprag | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 10500A | Pump Assembly, Saturn | — |
| 530 | Part # 10530A | Pump Gears, Saturn | — |
| 544 | Part # 10544A | Plate, Saturn Pump To Bell Housing | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 10100A | Friction, Saturn (All Drums) .061” (With 1 Sided Friction) Internal Splines (Use With 10120A & 10141A) | 1 |
| 120 | Part # 10120A | Steel, Saturn (All Drums) .061” (With 1 Sided Friction) External Splines (Use With 10100A & 10141A) | 1 |
| 140 | Part # 10140A | Pressure Plate, Saturn (All Drums) Top | 1 |
| 141 | Part # 10141A | Apply Plate, Saturn (All Drums) .130” (With 1 Sided Friction) External Splines (Use With 10100A & 10120A) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 234 | Part # 10234A | Collar, Saturn Mainshaft To 2nd/Reverse Gear | — |
| 248 | Part # 10248A | Collar, Saturn 1st Gear To Mainshaft | — |
| 267 | Part # 10267A | Collar, Saturn 3rd Gear To 2nd Gear (Countershaft) | — |
| 270 | Part # 10270A | Collar, Saturn 2nd Gear To Countershaft | — |
| 272 | Part # 10272A | Collar, Saturn Reverse Gear To Countershaft | — |
| 550 | Part # 10550A | Drum, Saturn 4th Clutch | 1 |
| 552 | Part # 10552A | Drum, Saturn 2nd & 3rd Clutch | 1 |
| 554 | Part # 10554A | Drum, Saturn 1st Clutch | 1 |
| 652 | Part # 10652A | Sprag, Saturn Input | 1 |
| 672 | Part # 10672A | Mainshaft, Saturn (40 Teeth) (.460” Thick Gear) | 1 |
| 672 | Part # 10672AA | Mainshaft, Saturn (40 Teeth) (.490” Thick Gear) | 1 |
| 672 | Part # 10672B | Mainshaft, Saturn (42 Teeth) (.450” Thick Gear) | 1 |
| 672 | Part # 10672BA | Mainshaft, Saturn (42 Teeth) (.490” Thick Gear) No Groove Under # 234 Race | — |
| 672 | Part # 10672BB | Mainshaft, Saturn (42 Teeth) (.490” Thick Gear) 2 Grooves Under #234 Race | — |
| 676 | Part # 10676A | Countershaft , Saturn Output Shaft (15 Teeth) | — |
| 676 | Part # 10676B | Countershaft, Saturn Output Shaft (16 Teeth) | — |
| 676 | Part # 10676C | Countershaft, Saturn Output Shaft (17 Teeth) | — |
| 676 | Part # 10676D | Countershaft, Saturn Output Shaft (18 Teeth) | — |
| 715 not on diagram | Part # 10715A | Differential Assembly, Saturn With 62 Teeth Ring Gear 1991-94 | 1 |
| 715 not on diagram | Part # 10715B | Differential Assembly, Saturn With 65 Teeth Ring Gear 1995-Up | — |
| 750 | Part # 10750A | Bell Housing, Saturn (With Raised Mountiong Boss At 3:00) No Threaded Mounting Bosses Around Differential Seal | 1 |
| 750 | Part # 10750AA | Bell Housing, Saturn (With Raised Mounting Boss At 3:00) With 3 Threaded Mounting Bosses Around Differential Seal… | 1 |
| 750 | Part # 10750AB | Bell Housing, Saturn (With Raised Mounting Boss At 3:00) With 3 Threaded Mounting Bosses Around Differential Seal… | — |
| 750 | Part # 10750AC | Bell Housing, Saturn (With Unthreaded Raised Boss At 3:00) No Mounting Holes Around Differential Seal (Cast # 2100323) | 1 |
| 750 | Part # 10750AD | Bell Housing, Saturn (With Unthreaded Raised Boss At 3:00) No Mounting Holes Around Differential Seal (Cast # 21002656) | 1 |
| 750 | Part # 10750B | Bell Housing, Saturn (No Raised Mounting Boss At 3:00) No Threaded Mounting Bosses Around Differential Seal… | 2 |
| 750 | Part # 10750BA | Bell Housing, Saturn (No Raised Mounting Boss At 3:00) No Threaded Mounting Bosses Around Differential Seal… | 1 |
| 759 | Part # 10759A | Cover, Saturn Rear (With Tubes)(Mainshaft Tube Bolts To The Inside Of Cover) | 1 |
| 759 | Part # 10759B | Cover, Saturn Rear (With Tubes)(Mainshaft Tube Bolts To The Outside Of Cover) | — |
| 760 | Part # 10760A | Case, Saturn (All 1991) (1992 With VIN # NZ200101 Thru NZ205624) | 1 |
| 760 | Part # 10760AA | Case, Saturn (1992 With VIN # To NZ200100 & 1993-96 With VIN # NZ205625 & Up) | 1 |
| 800 | Part # 10800A | Gear, Saturn 1st Drive (19 Teeth) | 1 |
| 800 | Part # 10800B | Gear, Saturn 1st Drive (21 Teeth) | 1 |
| 801 | Part # 10801A | Gear, Saturn 1st Driven (47 Teeth) | 1 |
| 801 | Part # 10801B | Gear, Saturn 1st Druiven (48 Teeth) 1 Groove | 1 |
| 801 | Part # 10801BA | Gear, Saturn 1st Driven (48 Teeth) No Groove | — |
| 803 | Part # 10803A | Gear, Saturn 2nd/Reverse Drive (30 Teeth) | 1 |
| 803 | Part # 10803B | Gear, Saturn 2nd/Reverse Drive (27 Teeth) | 1 |
| 804 | Part # 10804A | Gear, Saturn 2nd Driven (38 Teeth) (1.575”ID) | 1 |
| 804 | Part # 10804AA | Gear, Saturn 2nd Driven (38 Teeth) (1.810”ID) | — |
| 804 | Part # 10804B | Gear, Saturn 2nd Driven (42 Teeth) (1.575”ID) | 1 |
| 804 | Part # 10804BA | Gear, Saturn 2nd Driven (42 Teeth) (1.810”ID) | — |
| 806 | Part # 10806A | Gear, Saturn 3rd Drive (37 Teeth) | 1 |
| 806 | Part # 10806B | Gear, Saturn 3rd Drive (33 Teeth) | 1 |
| 807 | Part # 10807A | Gear, Saturn 3rd Driven (30 Teeth) | 1 |
| 807 | Part # 10807B | Gear, Saturn 3rd Driven (34 Teeth) | 1 |
| 810 | Part # 10810A | Gear, Saturn 4th Driven (28 Teeth) Fits Mainshaft #10672A With A 40 Teeth .460” Thick Gear | 1 |
| 810 | Part # 10810AA | Gear, Saturn 4th Driven (28 Teeth) Fits Mainshaft #10672AA With A 40 Teeth .490” Thick Gear | — |
| 810 | Part # 10810B | Gear, Saturn 4th Driven (25 Teeth) Fits Mainshaft #10672B & # 10672BA With A 42 Teeth Gear | 1 |
| 810 | Part # 10810BA | Gear, Saturn 4th Driven (25 Teeth) Fits Mainshaft #10672BB With A 42 Teeth Gear | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 281 | Part # 10281A | Retainer, Saturn Holds Sprag In | — |
| 494 | Part # 10494A | Filler Tube, Saturn | — |
| 741 not on diagram | Part # S10741P-2K | Sleeve Assembly, Saturn Pressure Regulator (Sleeve & Retainer) Use With T-95200-TL Reamer (Sonnax) | — |
| 741 not on diagram | Part # S10741P-3 | Spring, Saturn Line Pressure Regulator (Sonnax) | — |
| 795 | Part # 10795A | Nut, Saturn Mainshaft | 1 |
| 796 | Part # 10796A | Nut, Saturn Countershaft | 1 |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.