JF016E / RE0F10D parts diagram
Same diagram:
RE0F10D
Transmission page:
Positions:
158 total, 138 on the diagram
Parts:
195 total, 12 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 333002AF | Overhaul Kit, RE0F10D (JF016E) 2012-Up (CVT FWD) | — |
| 030 not on diagram | Part # 212030A | Bushing Kit, RE0F010A/F10B/ F10D/F10E/F10J 2007-Up (5 Pieces) | — |
| 741 not on diagram | Part # 333741POSK | Valve Kit, RE0F10D (JF016E) / RE0F10E (JF017E) Main Pressure Regulator (Oversized) (Contains: Valve & End Plug)… | — |
| 776 not on diagram | Part # 333776AK | Bolt Set, RE0F10D (JF016E) Bell To Case (14mm Hex x 1.490”Long)(22 Pieces) 2013-Up | — |
| 777 | Part # 212777AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Pump To Case (3-6mm Allen x 3.070” Long) (1-12mm Hex x 1.685”Long) (4 Pieces)… | — |
| 778 | Part # 323778AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Pump Cover To Pump (10mm)(4 Pices) 2007-Up | — |
| 779 not on diagram | Part # 333779AK | Bolt Set, RE0F10D (JF016E) Bottom Pan To Case (19 Pieces) (10mm x .945”Long) 2013-Up | — |
| 780 not on diagram | Part # 212780AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Coverter Reactor To Case (12mm Hex x 1.405”Long)(7 Pieces) 2007-Up | — |
| 781 not on diagram | Part # 212781AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Rear Cover To Case (14mm Hex x 1.500”Long) (19 Pieces) 2007-Up | — |
| 783 | Part # 212783AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Rear Cover To Bearing Retainers (Both) (3 Pieces Each)(12mm Hex x 1.430”… | — |
| 786 | Part # 333786AK | Bolt Set, RE0F10D (JF016E) Ring Gear To Differential (17mm Hex x 1.275”Long)(8 Pieces) 2013-Up | — |
| 791 | Part # 333791AK | Bolt Set, RE0F10D (JF016E) Valve Body To Case (10-10mm x 2.345”) (2-10mm x 1.950”) (2-10mm x 1.200”)(14 Pieces) 2013-Up | — |
| 960 | Part # 333960AK | Piston Kit, RE0F10D(JF016E) 2011-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 333529A | Converter Reactor, RE0F10D (JF016E)(7 Bolt Cast Iron) (32 Splines) (Cast # KM2 CVT-8 5Z03-1)(3.270”Tall) 2013-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 333421A | Solenoid, RE0F10D (JF016E) Primary (3.520”Long)(Black) (2 Prong Connector) (15Y24 ASHB5 Cast #) 2013-Up | — |
| 425 | Part # 333425A | Solenoid, RE0F10D (JF016E) TCC Control (1 Bolt)(Flat Top)(2 O-Rings)(1.945”Long) 2013-Up | — |
| 428 | Part # 333428A | Solenoid, RE0F10D(JF016E) Line Pressure (3.520”Long)(Black) (2 Prong Connector) (15Y24 ASHB5 Cast #) 2013-Up | — |
| 430 | Part # 333430A | Solenoid, RE0F10D (JF016E) Select (3.520”Long Black)(2 Prong Connector)(15Y25 ASHB5M) 2013-Up | — |
| 435 | Part # 333435A | Solenoid, RE0F10D (JF016E) Secondary (3.520”Long)(Black) (2 Prong Connector) (15Y24 ASHB5 Cast #) 2013-Up | — |
| 507 | Part # 212507A-1 | Valve, RE0F10D (JF016E) Pump Flow Control Valve 2007-Up | — |
| 507 | Part # 212507AA-1 | Valve, RE0F10D (JF016E) Pump Flow Control (Oversized) 2007-Up | — |
| 507 | Part # 323507-1A | Valve, RE0F10A (JF011E) (Nissan/Dodge) Pressure Regulator (In Pump)(1.655” Long) (.670”OD) 2007-Up | — |
| 740 | Part # 333740A | Valve Body, RE0F10D (JF016E) (5 Solenoids, 2 Pressure Switches)(ARO M2B Cast #) 2013-Up | — |
| 741 not on diagram | Part # 333741-1A | Manual Valve, RE0F10E/F10J For VB (Aluminum)(4.315”Long)(.470”OD)(3 Lands) (.235”/.315” Between Lands) 2013-Up | — |
| 991 | Part # 333991-3A | Rooster Comb, RE0F10D (JF016E) (5 Detents)(.475”Hole) (.680”Thick)(3 Holes)(2.868”Long) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 212410A | Switch, RE0F10A (JF011E) (Nissan/Dodge) PRNDL (8 Blade Rectangle Connector)(2 Bolts To Case)(All Plastic)… | — |
| 414 | Part # 333414A | Sensor, RE0F10D (JF016E) Secondary Pressure (1.710”Long) (1.055”At Flats)(6 Points) (3 Blade Rectangle Connector)… | — |
| 415 | Part # 333415A | Sensor, RE0F10D (JF016E) Primary Pressure (1.670”Long) (.970”At Flats)(6 Points) (Black Connector) 2013-Up | — |
| 436 | Part # 212436A | Sensor, RE0F09A/F09B ISS/OSS/ Primary Pulley (90 Degrees)(3 Pin Oval Connector) (2.220”Tall)… | — |
| 436 | Part # 333436A | Replaced by 212436A | — |
| 438 | Part # 333438A | Replaced by 212436A | — |
| 439 | Part # 333439A | Replaced by 212436A | — |
| 446 | Part # 333446A | Wire Harness, RE0F10D (JF016E) Internal (16 Pin Green Connector)(5-2 Prong Connector) (2-3 Wire Connector)(1 Ground)… | — |
| 446 | Part # 333446B | Wire Harness, RE0F10D (JF016E) Internal (22 Pin Black Case Connector)(Temperature Sensor)(Gray Female 17 Hole… | — |
| 845 | Part # 333845A | Reluctor, RE0F10D (JF016E) Primary Pulley (36 Teeth)(.803”Tall) (1.380”ID)(5.625”OD) (Output/VSS) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 333010A | Filter, RE0F10D (JF016E) (2 Bolt Metal Round Pick Up) (1.39ID)(.480”Tall Pick Up) 2013-Up | — |
| 013 | Part # 323013A | Filter, RE0F10D (JF016E) Auxillary External Filter (1.435”OD)(2.560”Long)(Cartridge Type With Seal) 2013-Up | — |
| 765 | Part # 333765A | Pan, RE0F10D (JF016E) Bottom (19 Bolts)(2 Dowel Pin Holes W/ Drain Plug)(No Step) (6 Round Magnet Dimples)… | — |
| 765 | Part # 333765B | Pan, RE0F10D(JF016E) Bottom (19 Bolts)(2 Dowel Pin Holes W/ Drain Plug)(No Step) (6 Round Magnet Dimples)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 212070A | Seal, RE0F10A/F10B (JF011E) (Nissan /Dodge) Front (Pump) 2007-Up | — |
| 072 | Part # 60072 | Seal, A24A / M24A / S24A / MDLA / M4TA / MP7A / SP7A / S4XA / A4RA / B4RA / BMXA Manual Shaft | 3 |
| 076 | Part # 83076A | Seal, RE0F08A (JF009E) Bell Housing Side 2007-Up | 1 |
| 076 | Part # 83076AA | Seal, RE0F08A (JF009E) Axle Case Side 2002-Up | 1 |
| 177 | Part # 212177AT | Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft (Teflon) (Butt Joint)(1.120”OD) (.070”Thick) 2007-Up | — |
| 177 | Part # 212177BT | Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft (Rear)(Teflon)(.670”OD)(.065”Thick) 2007-Up | — |
| 178 not on diagram | Part # 212178AT | Ring, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley To Rear Cover (.665”OD)(Teflon) (Solid)(Black) 2007-Up | — |
| 178 not on diagram | Part # 323178A | Ring, RE0F08A/F08B (JF009E) Secondary Pulley To Rear Cover (.660”OD)(.065”Thick)(Double Lap Joint) 2009-Up | — |
| 179 | Part # 212179A | Ring, RE0F10A (JF011E) (Nissan/Dodge) Converter Reactor (2.515”OD)(.085”Wide) 2007-Up | — |
| 183 not on diagram | Part # 333183AT | Ring, RE0F10D (JF016E) Secondary Piston (.087”Thick)(Teflon) (5.270”OD) 2013-Up | — |
| 187 | Part # 333187AT | Ring, RE0F10D (JF016E) Primary Piston (Outer)(Teflon) (6.240”OD)(.090”Thick) 2013-Up | — |
| 300 | Part # 212300BW | Gasket, RE0F10A (JF011E) Nissan Pan 2007-Up (19 Bolt Holes)(2 Pin Holes) | — |
| 309 | Part # 212309A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Pump Bolt To Case (.430”OD)(.070”Thick) 2007-Up | — |
| 313 | Part # 323313A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Rear Pump To Body (Outer) 2007-Up | — |
| 314 not on diagram | Part # 323314A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Rear Pump To Body (Inner) 2007-Up | — |
| 326 | Part # 333326A | O-Ring, RE0F10D (JF016E) Cooler Filter Housing To Case (Rubber)(Bonded Metal) (2.500”OD)(.095”Thick) 2013-Up | — |
| 338 | Part # 333338A | Lathe Cut Seal, RE0F10D (JF016E) Reverse Piston (Inner) (4.670”ID)(.070”Thick) 2013-Up | — |
| 339 | Part # 333339A | D-Ring, RE0F10D (JF016E) Reverse Piston (Outer)(7.030”OD) (.075”Thick) 2013-Up | — |
| 342 | Part # 212342A | Transfer Seal, RE0F08A/F08B (JF009E) Valve Body To Case (Rubber)(.125”Thick)(.630”OD) (.330”ID) 2007-Up | — |
| 344 | Part # 212344A | O-Ring, RE0F08B (JF009E) Rear Cover To Case Transfer (.065”Thick)(.860”OD) 2009-Up | — |
| 347 | Part # 212347A | O-Ring, RE0F08B (JF009E) Case Connector To Case (1.320”OD)(.140”Thick) 2009-Up | — |
| 369 not on diagram | Part # 333369A | O-Ring, RE0F10D (JF016E) Output Sensor To Bell Housing (.710”OD)(.080”Thick) 2013-Up | — |
| 370 | Part # 212370A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Speed Sensor To Case (.695”OD) (.080”Thick) 2007-Up | — |
| 370 | Part # 333370A | O-Ring, RE0F10D (JF016E) Sensor To Rear Cover (.710”OD) (.080”Thick) 2013-Up | — |
| 371 not on diagram | Part # 323371-1A | O-Ring, RE0F08A/F08B (JF009E) Dipstick To Tube (.570”OD)(.100”Thick) 2007-Up | — |
| 371 not on diagram | Part # 323371A | O-Ring, RE0F10D (JF016E) Filler Tube (.740”OD)(.100”Thick) 2013-Up | — |
| 372 not on diagram | Part # 323372A | O-Ring, RE0F10D (JF016E) Primary & Secondary Pressure Sensor (.475”OD)(.080”Thick) 2013-Up | — |
| 378 | Part # 323378A | O-Ring, RE0F10D (JF016E) Cooler To Case (1.0580”OD)(.150”Thick) 2013-Up | — |
| 379 | Part # 323379A | O-Ring, RE0F10D (JF016E) Filter To Pump (1.125”OD)(.100”Thick) 2013-Up | — |
| 380 | Part # 212380A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft To Converter (.955”OD)(.070”Thick) 2007-Up | — |
| 387 | Part # 212387A | Gasket, RE0F10A (JF011E) (Nissan/Dodge) Drain Plug To Pan (Copper)(.695”OD)(.510”ID) (.038”Thick) 2007-Up | — |
| 387 | Part # 323387A | O-Ring, RE0F08A/F08B (JF009E) Partial Drain Plug To Case (.100”Thick) 2007-Up | — |
| 389 not on diagram | Part # 212389A | O-Ring, RE0F08A/F08B (JF009E) Rear Cover To Bearing Retainer (.455”OD) 2007-Up | — |
| 389 not on diagram | Part # 323389A | O-Ring, RE0F10D (JF016E) Rear Cover To Primary Bolts (.420”OD)(.065”Thick) 2013-Up | — |
| 391 not on diagram | Part # 212391A | O-Ring, RE0F08A/F08B (JF009E) Pressure Tap (.465”OD)(.085”Thick) 2007-Up | — |
| 391 not on diagram | Part # 333391B | O-Ring, RE0F10D (JF016E) Presure Plug To Rear Cover (.770”OD)(.085”Thick) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 032 | Part # 212032A | Bushing, RE0F10A (JF011E) (Nissan/Dodge) Converter Reactor (1.040”OD)(.920”ID) (.400”Wide)(Babbit)(2 Grooves) 2007-Up | — |
| 035 | Part # 212035A | Bushing, RE0F10A (JF011E) (Nissan/Dodge) Pump Drive Sprocket To Converter Reactor (1.440”ID)(1.623”OD)(Babbit)… | — |
| 036 | Part # 323036A | Bushing, RE0F10A (JF011E)(Nissan/Dodge) Pump Cover Shaft & Shaft To Pump Body (.395”ID)(.475”OD)(.500”Wide) 2007-Up | — |
| 047 | Part # 333047A | Bushing, RE0F08A/F08B (JF009E) Priamry Pulley To Input Shaft (Bronze)(.550”ID)(.540”Long) 2007-Up | — |
| 211 | Part # 212211A | Bearing W/Races, RE0F10A (JF011E) (Nissan/Dodge) Converter Reactor To Drum (2.315”OD)(1.640”ID)(.160”Thick) 2007-Up | — |
| 227 | Part # 333227A | Spacer, RE0F10A (JF016E) Driven Transfer Gear To Bearing (2.115”OD)(1.270”ID) (.122”Thick) 2013-Up | — |
| 228 | Part # 333228A | Roller Bearing W/Inner Race, RE0F10D (JF016E) Secondary Pulley To Drive Gear (14 Rollers) (3.145”ID) 2013-Up | — |
| 229 | Part # 333229A | Ball Bearing, RE0F10D (JF016E) Secondary Pulley (Rear) (3.815”OD)(.665”Thick)(10 Balls) (Cast # NSK B45-128) 2013-Up | 1 |
| 230 | Part # 333230A | Shim, RE0F10D (JF016E) Secondary Pulley To Rear Cover (3.815”OD) 2013-Up (Selective) | — |
| 232 | Part # 212232A | Bearing W/ Races, RE0F10A (JF011E) (Nissan Dodge) Drum To Sungear (.150”Thick) (2.390”OD)(1.580”ID) 2007-Up… | — |
| 235 | Part # 333235A | Ball Bearing, RE0F10D (JF016E) Primary Pulley To Rear Cover (3.145”OD)(1.340”ID) (.625”Thick)(9 Balls)… | 1 |
| 247 | Part # 333247A | Replaced by 212232A | — |
| 251 | Part # 333251A | Replaced by 212232A | — |
| 264 | Part # 333264A | Ball Brg, RE0F10D (JF016E) Primary Pulley (Front)(Sealed) (3.975”OD)(2.160”ID)(.775”Thick) (Cast # NSK 55TM05) 2013-Up | 1 |
| 273 | Part # 212273A | Race, RE0F10D (JF016E) Pinion To Bell & Pinion To Case (Tapered)(2.440”OD)(1.983”ID) (.550”Thick) 2013-Up | — |
| 274 | Part # 212274A | Bearing, RE0F10A (JF011E) (Nissan/Dodge) Pinion To Bell (Tapered)(1.180”ID)(16 Rollers) (KOYO 30206JR) 2007-Up… | — |
| 278 | Part # 212278A | Washer, RE0F10A (JF011E) (Nissan/Dodge) Drive Sprocket To Converter Reactor (3 Tabs) (2.675”OD)(2.010”ID)(.050”Thick)… | — |
| 281 | Part # 323281A | Ball Bearing, RE0F10D (JF016E) Driven Sprocket (10 Balls)(.915”OD)(.475”ID)(.235”Thick) 2013-Up | — |
| 290 | Part # 212290A | Shim, RE0F10A (JF011E) (Nissan/Dodge) Differential To Case (Selective) 2007-Up | — |
| 291 | Part # 212291A | Race, RE0F10A (JF011E) (Nissan/Dodge) Differential To Bell (2.675”OD)(.570”Thick)(2.250D) (NTF 32008XJG) 2007-Up… | — |
| 292 | Part # 212292A | Bearing, RE0F10A (JF011E) (Nissan/Dodge) Differential To Bell (Tapered)(1.575”OD) (22 Rollers)(NTF 32008XJG) 2007-Up… | — |
| 436 | Part # 203436-1A | Shim, RE0F09A Sensor To Bell Housing (.039”Thk)(.545”OD) (.260”ID) 2003-Up (Also Fits 20 Series Honda B7XA Only)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 333500A | Pump, RE0F10D (JF019E) (Cast Iron Pump Cover)(4 Bolt) (Cast On Pump Body M15Y30CEV7) 2013-Up | — |
| 510 | Part # 333510A | Pump Body, RE0F10D (JF016E) (4 Bolt Aluminum)(4 Bolt Cover) (M15Y30CEV7)(1.100”ID Filter Opening)… | — |
| 519 | Part # 333519A | Pump Cover, RE0F10D (JF016E) (Cast Iron)(4 Bolt)(1 Threaded Boss)(No Gasket) 2013-Up | — |
| 528 | Part # 333528A | Spacer Plate, RE0F10D (JF016E) Pump (Rear)(2.080”OD) (.595”ID)(.363”Thick)(2 Oval Holes, 2 Slots & 2 Guide Pins)… | — |
| 532 | Part # 333532A | Rotor, RE0F10D (JF016E) Pump (1.495”OD)(.628”Thick)(12 Vane) (18 Splines) 2013-Up | — |
| 533 | Part # 323533A | Vanes, RE0F10D (JF016E) Pump Rotor (.052”Thick)(.630”Long)(.315”Wide) 2013-Up | — |
| 534 | Part # 333534A | Slide, RE0F10D (JF016E) Pump (Outer)(2.120”OD)(.632”Thick) (2 Holes For Pins) 2013-Up | — |
| 544 | Part # 323544A | Plate, RE0F11A (JF015E) Pump (Front)(.235”Thick)(2.120”OD) (.515”ID) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 108 | Part # 203108A | Friction, RE0F09A/F09B Forward Clutch (.061”)(36 Teeth)(5.430”OD) 2003-Up | 1 |
| 110 | Part # 203110A | Friction, RE0F09A/F09B Reverse Clutch (.062”)(40 Teeth)(7 1/16”OD) 2003-Up | 1 |
| 119 not on diagram | Part # 212119A | Fri Module, RE0F10D (JF016E) 2007-Up | — |
| 128 | Part # 212128A | Steel, RE0F10A (JF011E) (Nissan/Dodge) Forward Clutch (.050”Thick)(30 Teeth)(4.725”ID) (5.700”OD) 2007-Up | — |
| 130 | Part # 333130A | Steel, RE0F10D (JF016E) Reverse Clutch (.054”Thick)(11 Teeth)(6 7/16”ID) 2013-Up | — |
| 131 | Part # 333131A | Cushion, RE0F10D (JF016E) Reverse Clutch (.060”Thick)(5 Teeth)(6 7/16”ID)(Waved) 2013-Up | — |
| 139 not on diagram | Part # 333139B | Steel Module, JF016E/RE0F10D CVT-8 2012-Up | — |
| 148 | Part # 333148A | Pressure Plate, RE0F10D (JF016E) Foward Clutch (Top)(30 Teeth)(.162”Thick)(4.720”ID) 2013-Up | — |
| 150 | Part # 333150A | Pressure Plate, RE0F10D (JF016E) Reverse Clutch (Top)(11 Teeth)(.195”Thick)(6.450”ID) 2013-Up | — |
| 853 | Part # 333853A | Cushion, RE0F10D (JF016E) Forward (Waved)(5.480”OD)(4.960”ID)(.060”Thick) 2013-Up | — |
| 960 | Part # 333960A | Piston, RE0F10D (JF016E) Secondary (3.080”Thick)(5.265”OD) (1.340”ID) 2013-Up | — |
| 964 | Part # 333964A | Piston, RE0F10D (JF016E) Forward Clutch (Bonded)(5.435”OD)(2.730”ID)(SKF 11613-55001) 2013-Up | — |
| 966 | Part # 333966A | Piston, RE0F10D (JF016E) Reverse (Aluminum)(1.410”Thick)(7”OD)(4.780”ID)(6 Sets Of 4 Spring Studs) 2013-Up | — |
| 974 | Part # 333974A | Return Spring, RE0F10D (JF016E) Forward Clutch (24 Springs)(.970”Thick)(3.918”OD) (3.255”ID) 2013-Up | — |
| 981 | Part # 333981A | Piston, RE0F10D (JF016E) Primary (6.290”OD)(.910”Tall)(Steel)(1.350”ID) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 525 | Part # 212525A | Chain, RE0F10A(JF011E) (Nissan/Dodge) Pump Drive (38 Links)(.240”Thick) (No Pins Included) 2007-Up | — |
| 526 | Part # 333526A | Sprocket, RE0F10D (JF016E) Pump Drive (35 Teeth)(4 Converter Slots)(.395”Thick) (2.690”OD)(.110”Thick At Teeth) 2013-Up | — |
| 527 | Part # 212527A | Sprocket, RE0F10A (JF011E) (Nissan/Dodge) Pump Driven (31 Teeth)(.482”Thick) (.110” At Teeth)(2.375”OD)… | — |
| 554 | Part # 333554A | Drum, RE0F10D (JF016E) Forward (3 Clutch)(30 Teeth Steels) (48 Teeth Reluctor) (1.970”Thick)(24 Splines) 2013-Up | — |
| 587 | Part # 333587A | Planet, RE0F10D (JF016E) Reverse (4 Gear)(Left Angle) (1.570” At Edge)(14 Teeth Gears) (40 Spline Hub) 2013-Up | — |
| 592 | Part # 212592A | Ring Gear, RE0F10A (JF011E) (Nissan/Dodge) Front Planet (109 Teeth)(Right Angle) (30 Lugs)(.635”Thick)(5.680”OD)… | — |
| 617 | Part # 212617A | Sungear, RE0F10A (JF011E) (Nissan/Dodge) Reverse Planet (82 Teeth Right Angle) (3.685”OD)(36 Teeth Clutch Hub) 2007-Up | — |
| 670 | Part # 333670A | Input Shaft, RE0F10D (JF016E) (6 3/4” Long)(20 Splines) (22 Splines On Rear) 2013-Up | — |
| 671 | Part # 212671A | Shaft, RE0F10A (JF011E) (Nissan/Dodge) Pump Drive (3.550”Long)(.392”OD Pilot) (18 Splines & 14 Splines On End)2007-Up | — |
| 700 | Part # 333700A | Belt, JF016E (RE0F10D) (CVT8) 2014-Up | — |
| 702 | Part # 333702-1A | Cover, RE0F10D (JF016E) Driven Sprocket (Tin)(Held By 2 Nuts To #702)(2 Holes) (5 3/4” Long) 2013-Up | — |
| 705 | Part # 333705A | Primary Pulley Half, RE0F10D (JF016E) (7 1/2”Tall)(Front) (6 3/4”OD)(38 Splines)(1.215”OD) 2013-Up | — |
| 706 | Part # 333706A | Secondary Pulley Half, RE0F10D (JF016E) (2.740”Thick) (6 11/16”OD)(5.270”Piston Pocket) (Front) 2013-Up | — |
| 707 | Part # 333707A | Primary Pulley Half, RE0F10D (JF016E) (Rear)(6 3/4”OD) (2.490”Tall)(1.830”ID)(6.240”Piston Pocket) 2013-Up | — |
| 708 | Part # 333708A | Secondary Pulley Half, RE0F10D (JF016E) (10”Long)(6 3/4”OD) (Rear Half)(30 Splines) 2013-Up | — |
| 710 | Part # 212710A | Gear, RE0F10A (Nissan/Dodge) Driven Transfer On Secondary Pulley (30 Teeth) (One Groove)(Right Angle)(2.885”OD)… | — |
| 712 | Part # 333712A | Gear, RE0F10D (JF016E) Driven Transfer (49 Teeth)(1.265”Thick) (32 Splines)(Left Angle 1 Center Groove) 2013-Up | — |
| 716 | Part # 212716A | Differential Housing, RE0F10A (JF011E)(Nissan)(1.575”OD)(8 Bolt)(5.640”Tall) 2007-09 | — |
| 720 | Part # 333720A | Ring Gear, RE0F10D (JF016E) Differential (68 Teeth)(Right Angle) (2 Grooves)(8 Bolts) (4.560”ID)(7.685”OD) 2013-Up | — |
| 730 | Part # 333730A | Pinion, RE0F10D (JF016E) (23 Teeth)(2 Grooves)(4.430”Long Hollow Shaft)(Right Hand Threads)(2.825”OD Gear)… | — |
| 750 | Part # 333750A | Bell Housing, RE0F10D (JF016E) (22 Bolts To Case)(6 3/8” To Bolts)(2:30 Open Starter) (4.100”Thick)(AMX Casting)… | — |
| 759 | Part # 333759DAK | Rear Cover With Pulley Assembly, RE0F10D (19 Bolt Rear Cover)(With 4 Threaded Bosses) (Cast # AA9OA)… | 1 |
| 759 | Part # 333759DK | Rear Cover With Pulley Assembly, RE0F10D (19 Bolt Rear Cover) (With 4 Threaded Bosses) (Cast # 28XOA)… | 1 |
| 759 | Part # 333759EK | Rear Cover With Pulley Assembly, RE0F10D (19 Bolt Rear Cover) (With 4 Threaded Bosses) (Cast # F2B)… | 1 |
| 760 | Part # 333760A | Case, RE0F10D (JF016E) (Cast # ARO)(2 Speed Sensors) (No Cooler)(19 Pan Bolts) (22 Bolts To Bell)(2.205”Axle Seal)… | — |
| 991 | Part # 333991-4A | Shaft, RE0F10D (JF016E) Linkage (15”Long)(1 Groove)(1 Hole) (.450”/.470”OD) 2013-Up | — |
| 995 not on diagram | Part # 333995AK | Park Pawl Assembly, RE0F10D (JF016E) 2013-Up (4 Pieces) (Pawl Is .315”Thick)(… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 488 | Part # 333488A | Plug, RE0F10D (JF016E) Pressure On Rear Cover (10mm Allen Head)(.925”OD)(.750”Long) (.700”OD Right Hand Threads)… | — |
| 492 | Part # 212492A | Drain Plug, RE0F10A (JF011E) (Nissan/Dodge) In Bottom Pan (19mm Hex x .665”Long) 2007-Up | — |
| 492 | Part # 323492A | Drain Plug, RE0F10A (JF011E) (Nissan/Dodge) Partial (10mm Allen Head)(1.095” / .860” Thick) (.750”Long) In Case Below… | — |
| 494 | Part # 333494A | Dipstick Tube, RE0F10D (JF016E) 2 Bolts To Case (23”Long) (2 Extra Brackets Welded On) 2013-Up | — |
| 507 | Part # 212507-6B | Plug, RE0F10A (JF011E) (Nissan/Dodge) Pump Body Pressure (19mm Hex x .550”Thick) (.550”OD Threads) 2007-Up | — |
| 507 | Part # 323507-3A | Spring, RE0F10A (JF011E) (Nissan/Dodge) Pressure Regulator (In Pump)(1.645” Long) (.495”OD) 2007-Up | — |
| 507 | Part # 323507-6A | Plug, RE0F10D (JF016E) Pressure Regulator In Pump (.630”Thick)(1.100”OD)(.860”ID) (Right Hand Threads)(11mm Allen Head)… | — |
| 529 | Part # 212529-1A | Bracket, RE0F10A (JF011E) (Nissan/Dodge) Conveter Reactor To Pump Assembly (.155”Thick)(2.470”Long)(2 Bolt Holes)… | — |
| 694 | Part # 333694A | Retainer, RE0F10D(JF016E) Primary Pulley To Rear Cover (2.975”ID Hole)(.185”/.290”Thick) 2013-Up | — |
| 696 | Part # 212696A | Bracket, RE0F10A (JF011E) (Nissan/Dodge) Holds Secondary Pulley Bearing To Rear Cover (3 Bolt)(2.965”ID) 2007-Up | — |
| 702 | Part # 333702A | Shield, RE0F10D (JF016E) Over Pump And Under Differential (Tin) (3 Bolts To Case)(2 Studs) (2 Rubber Strips)… | — |
| 705 | Part # 333705-1A | Roller Guide, RE0F10D (JF016E) Primary Pulley (Rear) (2.490”Tall)(6 3/4”OD)(38 Splines) (1.215”OD) 2013-Up | — |
| 705 | Part # 333705-2A | Plate Guide, RE0F10D(JF016E) Primary Pulley (Rear) (.450”Wide)(2.155”Long) 2013-Up (Also Fits Secondary Pulley (Rear)) | — |
| 708 | Part # 333708-1A | Roller Guide, RE0F10D (JF016E) Secondary Pulley (.522”Long)(.232”OD) 2013-Up | — |
| 761 | Part # 212761A | Plug Pressure Tap, RE0F08A/F08B (14mm Hex x .670”Long) 2007-Up | — |
| 795 | Part # 333795A | Nut, RE0F10D (JF016E) Primary Rear (46mm Hex)(1.220”ID) (Right Hand Threads) (.475”Thick) 2013-Up | — |
| 796 | Part # 212796A | Nut, RE0F10D (JF016E) Pinion (6 Point Hex)(32mm)(Right Hand Threads)(.985”ID) (.485”Thick) 2013-Up | — |
| 797 | Part # 212797B | Nut, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley (Rear)(55mm)(6 Point)(1.735”ID) (Right Hand Threads)(.323”Thick)… | — |
| 797 | Part # 333797A | Nut, RE0F10D (JF016E) Secondary Pulley (Front)(40mm Hex) (6 Point)(.985”ID)(Left Hand Threads)(.515”Thick)(1.770”OD)… | — |
| 799 | Part # 323799-1A | Nut, RE0F08A/F08B(JF009E) Holds Internal Lever To End Of Shaft (14mm Hex) (RH Threads) 2007-Up | — |
| 799 | Part # 323799A | Nut, RE0F10A (JF011E) (Nissan/Dodge) Holds External Linkage To Shaft (14mm Hex) (Right Hand Threads) 2007-Up | — |
| 843 | Part # 333843A | Pin, RE0F10D (JF016E) Solenoid Retainer (.770”Long) (.310”OD Head)(.115”OD Stem) 2013-Up | — |
| 843 | Part # 333843B | Clip, RE0F10D (JF016E) Case Connector To Case (1.300”Long) (.050”Wire)(1.080”Wide) 2013-Up | — |
| 860 | Part # 333860A | Snap Ring, RE0F10D (JF016E) Secondary Pulley Half (Wire) (1.870”OD)(.095”Thick) (Front & Rear) 2013-Up | — |
| 862 | Part # 333862A | Snap Ring, RE0F10D (JF016E) Holds Reatainer To Secondary Pulley (5.650”OD)(.070”Thick) (.155”Wide) 2013-Up | — |
| 870 | Part # 323870A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Holds Ball Bearing To Pump Cover (.985”OD)(.022”Thick)(2 Ears) 2007-Up | — |
| 876 | Part # 333876A | Snap Ring, RE0F10D (JF016E) Holds Low Clutch Pressure Plate (Top) In Case (.090”Thick) (5.770”OD) 2013-Up | — |
| 877 | Part # 333877A | Snap Ring, RE0F10D (JF016E) Holds Foward Piston Kit In Drum (2.765”OD)(.045”Thick) (.115”Wide) 2013-Up | — |
| 878 | Part # 333878A | Snap Ring, RE0F10D (JF016E) Holds Foward Drum To Ring Gear (5.870”OD)(.070”Thick) (Front) 2013-Up | — |
| 880 | Part # 212880A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft To Forward Drum (1.060”OD) (.045”Thick)(.075”Wide) 2007-Up | — |
| 892 | Part # 333892A | Snap Ring, RE0F10D (JF016E) Reverse Clutch To Case (.069”Thick)(.155”Wide) 2013-Up | — |
| 893 | Part # 333893A | Snap Ring, RE0F10D (JF016E) Reverse Retainer To Case (7 3/4”OD)(.100”Thick)(.155”Wide) 2013-Up | — |
| 897 not on diagram | Part # 323897A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Driven Sprocket To Bearing (2 Eyelets) (.560”OD)(.037”Thick) 2007-Up | — |
| 899 | Part # 212899A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley Holds Bearing To Case (4.110”OD)(.040”Thick) 2007-Up | — |
| 970 | Part # 333970A | Spring, RE0F10D (JF016E) Secondary Piston Return (3.450”Tall)(3.300”OD)(.295”Coil) 2013-Up | — |
| 976 | Part # 333976A | Retainer, RE0F10D (JF016E) Reverse (24 Springs)(.775”Thick)(6 Sets Of 4)(7 Outer Teeth) 2013-Up | — |
| 980 | Part # 333980A | Retainer, RE0F10D (JF016E) Secondary (1.935”Thick)(5.340”OD)(1.885”ID) 2013-Up | — |
| 984 | Part # 333984A | Retainer, RE0F10D (JF016E) Forward Clutch (Bonded)(5.040”OD)(2.735”ID)(.800”Tall) 2013-Up | — |
| 991 | Part # 323991-1A | Lever, RE0F10A (JF011E) (Nissan/Dodge) Internal Linkage (2.240” Long)(.125”Thick) 2007-Up | — |
| 991 | Part # 323991-6A | Pin, RE0F10A (JF011E) (Nissan/Dodge) Holds Rooster Comb To Shaft (1” Long)(.160”OD) 2007-Up | — |
| 991 | Part # 333991-2A | Detent Spring, RE0F10D (JF016E)(3.290”Long)(.190”OD) (Roller Flat Body With Bent Leg) 2013-Up | — |
| 991 | Part # 333991-5A | Pin, RE0F10D (JF016E) Holds Shaft To Case (Solid)(.155”OD)(2.280”Long) 2013-Up | — |
| 992 | Part # 212992A | Shift Lever, RE0F10A (JF011E) (Nissan/Dodge) External (.155”Thick)(2 Bends 2 Slots & 1 Hole)(3.095”Tall) 2007-Up | — |
| 994 | Part # 212994-1A | Actuator, RE0F10D (JF016E) Park Rod (2 Holes)(.395”ID)(2.755”Long)(.355”Thick) 2013-Up | — |
| 994 | Part # 333994A | Park Rod, RE0F10D (JF016E) (6 1/8”Long)(.800” Ball One Bend) 2013-Up | — |
| 998 | Part # 212998A | Heat Exchanger, RE0F10A (JF011E) (Square W/4 Tubes) (W/O-Rings)… | — |
| 999 | Part # 212999-6A | Oil Tube, RE0F10A (JF011E) (Nissan/Dodge) Differential To Bell (.250”OD)(6 Bends) (8 7/16”Long) 2007-Up | — |
| 999 | Part # 333999-1 | Oiler Tube, RE0F10D(JF016E) In Case For Belt (2.435”long) (.470”OD Head)(2 Bends) 2013-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.