F-4EAT / F4E parts diagram
Same diagram:
F4E
Transmission page:
Positions:
167 total, 120 on the diagram
Parts:
269 total, 47 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 38000AB | Paper & Rubber Kit, 4EAT-F 1990-Up (Combo) | — |
| 002 not on diagram | Part # 38002AB | Overhaul Kit, 4EAT-F 1990-Up (Combo) | — |
| 004 not on diagram | Part # 38004AB | Master L/Steels Kit, 4EAT-F 1990-Up (Combo) | — |
| 006 not on diagram | Part # 38006AB | Master W/Steels Kit, 4EAT-F 1990-Up (Combo) | — |
| 011 not on diagram | Part # 38011A | Filter Kit, F4E 1990-Up | — |
| 030 not on diagram | Part # 38030 | Bushing Kit, F4AEL/4EAT-F 1990-06 | — |
| 165 not on diagram | Part # T38165A | Shift Kit, F4A-EL / 4EAT-F 1990-Up (Transgo) | — |
| 175 not on diagram | Part # 38175A | Ring Kit, F4E Full (Metal) 1990-Up | — |
| 175 not on diagram | Part # 38175AT | Ring Kit, F4E Full (Teflon) 1990-Up | — |
| 175 not on diagram | Part # 38175B | Ring Kit, F4E Short (4 Pump Rings) Metal 1990-Up | — |
| 320 not on diagram | Part # 38320AK | Gasket Kit, F4E Valve Body 1990-97 | — |
| 320 not on diagram | Part # 38320BK | Gasket Kit, F4E Valve Body 1998-Up (All Except Kia) | — |
| 390 not on diagram | Part # 38390 | External Seal Kit, F4E/F4EAT/F4A-EL With Seals & Pan Gasket 1990-98 | — |
| 420 not on diagram | Part # 38420A | Solenoid Set, F4E (For 4 Solenoid Valve Body) 1991-Up | — |
| 560 not on diagram | Part # 38560A | Piston Kit, F4E 3-4 Clutch (.458” Thick Piston) | — |
| 560 not on diagram | Part # 38560B | Piston Kit, F4E 3-4 Clutch (.382” Thick Piston) | — |
| 566 not on diagram | Part # 38566A | Piston Kit, F4E Reverse Clutch | — |
| 567 not on diagram | Part # 38567A | Piston Kit, F4E Low/Reverse Clutch | — |
| 569 not on diagram | Part # 38569A | Piston Kit, F4E Coast Clutch | — |
| 741 not on diagram | Part # S38741BAK | Boost Valve Kit, F4E (Valve, Sleeve & End Plug)(Sonnax)(For Units With Electronic Transmission) | 1 |
| 776 not on diagram | Part # 38776AK | Bolt Set, F4E Bell Housing To Case | — |
| 777 | Part # 38777AK | Bolt Set, F4E Pump To Case | — |
| 782 not on diagram | Part # 38782AK | Bolt Set, F4E Valve Body To Case | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 38529A | Converter Reactor, F4E (31 Splines) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 165 not on diagram | Part # A38165A | Valve Body Kit, F4A-EL (Translab) | — |
| 421 | Part # 38421A | Solenoid, F4E 1-2 Shift (Green Connector) 1990-Up (Has A Long Bent Bracket) | 1 |
| 422 | Part # 38422A | Solenoid, F4E 2-3 & 3-4 Shift (One Solenoid Does Both Shifts) | 1 |
| 425 | Part # 38425A | Solenoid, F4E TCC (Lock-Up) (Beige Connector) 1990-Up (Has A Short Straight Bracket) | — |
| 431 not on diagram | Part # 38431A | Solenoid, F4E EPC 1998-Up (For Valve Body With 5 Solenoids) Solenoid Is .940”OD (All Except Kia) | — |
| 431 not on diagram | Part # 38431B | Solenoid, F4E EPC 1998-Up (For Valve Body With 5 Solenoids) Solenoid Is .800”OD | — |
| 740 not on diagram | Part # 38740A | Valve Body, F4E (4 Solenoid) 1.8L (No Tube) | 1 |
| 740 not on diagram | Part # 38740AA | Valve Body, F4E (4 Solenoid) (With 1 Tube) (Has The 2-3 Timing Valve By Itself & No 3-2 Timing Valve) | — |
| 740 not on diagram | Part # 38740B | Valve Body, F4E (4 Solenoid) 1.9L & 2.0L (With 1 Tube)(Has A 2-3 & 3-2 Timing Valve) | 1 |
| 740 not on diagram | Part # 38740BD | Valve Body, F4E (5 Solenoid) (With 1 Tube)(Has The 2-3 Timing Valve By Itself & No 3-2 Timing Valve) | — |
| 740 not on diagram | Part # 38740C | Valve Body, F4E (5 Solenoid) With 1 Tube (Has The 2-3 Timing Valve & The 3-2 Timing Valve Side By Side) | — |
| 740 not on diagram | Part # 38740CA | Valve Body, F4E (5 Solenoid) No Tube | — |
| 741 not on diagram | Part # S38741DA | Valve, F4E Pressure Modulator (Oversize) (Sonnax) (Use W/Tool # T-74846-TL4) | 1 |
| 741 not on diagram | Part # S38741PA | Valve, F4E Pressure Regulator (Oversize) Sonnax) (Use W/Tool # T-74846-TL5) | 1 |
| 925 not on diagram | Part # 38925A | Accumulator Assembly, F4E 1-2 With 1 Spring | — |
| 925 not on diagram | Part # 38925AA | Accumulator Assembly, F4E 1-2 With 2 Springs (1.9L Only) | — |
| 930 not on diagram | Part # 38930A | Accumulator Assembly, F4E 2-3 | — |
| 945 not on diagram | Part # 38945A | Accumulator, F4E Neutral-Reverse | — |
| 950 not on diagram | Part # 38950A | Accumulator Assembly, F4E Neutral-Overdrive | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 38410A | Switch, F4E Neutral (With Connector On End Of Wire Harness) 1991-96 | — |
| 410 | Part # 38410AA | Neutral Switch, F4E (With Connector Made On Switch & Points Out To Side Of The Transmission) (Has No Wires On Switch)… | — |
| 410 | Part # 38410AB | Neutral Switch, F4E (With Connector Made On Switch & Points Up) (No Wire Harness) 1997-Up | — |
| 410 | Part # 38410AC | Neutral Switch, F4E (With Connector Made On Switch & Points To The Rear Of The Transmission) (No Wire Harness) 1997-Up | — |
| 446 | Part # 38446A | Wire Harness, F4E Internal (6 Pin Case Connector With 2 Two Wire & 2 One Wire Connectors)(With A Two Wire TOT Sensor)… | — |
| 446 | Part # 38446AA | Wire Harness, F4E Internal (7 Pin Case Connector With 2 Two Wire & 3 One Wire Connectors)(With A Two Wire TOT Sensor)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 38010A | Filter, F4E 2WD 1990-Up | 1 |
| 010 | Part # 38010B | Filter, F4E AWD (All Metal) 1990-Up | — |
| 765 | Part # 38765A | Pan, F4E (Bottom) (1 5/8” At Deepest Point) | — |
| 765 | Part # 38765AA | Pan, F4E (Bottom) (2 1/2” At Deepest Point) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 28070 | Seal, F4E Front (Narrow) 1990-Up | — |
| 070 | Part # 28070A | Seal, F4E Front (Wide) 1990-Up | — |
| 076 | Part # 38076A | Seal, F4E Axle (Both Sides)(.349” Thick)(Can Use 42076A) | — |
| 076 | Part # 42076A | Seal, 4F27E/FNR5 Axle (Both Sides) (.395” Thick)(2.205”OD) 1999-Up | 4 |
| 078 not on diagram | Part # 28078 | Seal, F4E Speed-O Shaft | — |
| 178 not on diagram | Part # 38178AT | Ring, F4E Turbine Shaft (Teflon) 1990-Up | — |
| 179 | Part # 38179A | Ring, F4E Pump Stator (Metal) 1990-Up | — |
| 179 | Part # 38179AT | Ring, F4E Pump Stator (Teflon) 1990-Up | 1 |
| 180 | Part # 38180A | Ring, F4E Output Gear (Metal) 1990-Up | — |
| 181 | Part # 38181AT | Ring, F4E Coast Clutch (Teflon) 1990-Up | — |
| 191 not on diagram | Part # 38191AAT | Ring, F4E Neutral-Reverse Accumulator (Small) Butt Joint (Teflon) 1990-Up | — |
| 191 not on diagram | Part # 38191AT | Ring, F4E 2-3 / Neutral-Overdrive (Small) Scarf Cut (Teflon) 1990-Up | — |
| 192 not on diagram | Part # 38192AT | Ring, F4E 2-3 / Neutral-Overdrive / Neutral-Reverse Accumulator (Large) Scarf Cut (Teflon) 1990-Up | — |
| 300 | Part # 38300A | Gasket, F4E Pan (19 Holes) 1990-Up (Cork) | — |
| 300 | Part # 38300AF | Gasket, F4E Pan (19 Holes) 1990-Up (Farpak) | — |
| 310 | Part # 38310A | Gasket, F4E Front Pump 1990-Up | — |
| 350 not on diagram | Part # 38350A | O-Ring, F4E 1-2 / 2-3 / Nuetral-Overdrive / Neutral-Reverse Accumulator Stop (Cover) | — |
| 351 not on diagram | Part # 38351A | D-Ring, F4E 1-2 Accumulator (Small) | — |
| 352 not on diagram | Part # 38352A | D-Ring, F4E 1-2 Accumulator (Large) | — |
| 369 | Part # 38369A | O-Ring, F4E Speed-O Housing To Case O-Ring 1990-Up | — |
| 379 not on diagram | Part # 38379A | D-Ring, F4E Filter O-Ring | — |
| 381 | Part # 38381A | O-Ring, F4E Converter Reactor | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 031 | Part # 28031A | Bushing, F4E Converter Hub (57.1mm) 1990-Up | — |
| 032 | Part # 38032A | Bushing, F4E Converter Reactor (Small) To Turbine Shaft | — |
| 035 not on diagram | Part # 38035A | Bushing, F4E Inner Pump Gear 1990-Up | — |
| 036 | Part # 38036 | Bushing, F4E Stator (Small) For Pump Drive Shaft | — |
| 037 | Part # 38037A | Bushing, F4E Stator (Large) For Turbine Shaft | — |
| 052 | Part # 38052A | Bushing, F4E Sun Gear 1990-Up | — |
| 061 | Part # 38061A | Bushing, F4E 2-4 Drum | — |
| 210 | Part # 38210A | Race, F4E Stator To reverse Drum (1.2mm) | — |
| 210 | Part # 38210AA | Race, F4E Stator To reverse Drum (1.4mm) | — |
| 210 | Part # 38210AB | Race, F4E Stator To reverse Drum (1.6mm) | — |
| 210 | Part # 38210AC | Race, F4E Stator To reverse Drum (1.8mm) | — |
| 210 | Part # 38210AD | Race, F4E Stator To reverse Drum (2.0mm) | — |
| 210 | Part # 38210AE | Race, F4E Stator To reverse Drum (2.2mm) | — |
| 211 | Part # 38211A | Bearing W/Race, F4E Stator To Reverse Drum | 1 |
| 213 | Part # 38213A | Bearing W/Race, F4E Shell To 3-4 Clutch Drum | 1 |
| 231 | Part # 38231A | Bearing W/Race, F4E Reverse Drum To Hub | — |
| 235 | Part # 38235A | Bearing, F4E Drum With Sun Gear To Forward Clutch Hub | 1 |
| 237 | Part # 38237A | Bearing, F4E Band Drum To Forward Sprag | — |
| 244 | Part # 38244A | Bearing, F4E Planet To Sun Gear Drum | — |
| 245 | Part # 38245A | Race, F4E Planet To Sun Gear Drum | 1 |
| 250 | Part # 38250A | Race, F4E Drum To Planet | — |
| 251 | Part # 38251A | Bearing W/Race, F4E Drum To Planet | 1 |
| 273 | Part # 38273A | Cup Race, F4E Converter Reactor To Pinion Bearing | — |
| 276 | Part # 38276A | Shim, F4E Pinion Cup Race To Pinion Retainer | — |
| 282 | Part # 38282A | Cup Race, F4E Idler Gear | — |
| 283 | Part # 38283A | Cone Bearing, F4E Idler Gear & Pinion Gear | — |
| 284 | Part # 38284A | Shim, F4E Between Idler Gear Bearings (.150”) | 1 |
| 284 | Part # 38284AA | Shim, F4E Between Idler Gear Bearings (.152”) | 1 |
| 284 | Part # 38284AC | Shim, F4E Between Idler Gear Bearings (.156”) | 1 |
| 284 | Part # 38284AD | Shim, F4E Between Idler Gear Bearings (.158”) | 1 |
| 284 | Part # 38284AE | Shim, F4E Between Idler Gear Bearings (.159”) | 1 |
| 284 | Part # 38284AF | Shim, F4E Between Idler Gear Bearings (.161”) | 1 |
| 284 | Part # 38284AG | Shim, F4E Between Idler Gear Bearings (.163”) | — |
| 284 | Part # 38284AH | Shim, F4E Between Idler Gear Bearings (.165”) | — |
| 284 | Part # 38284AJ | Shim, F4E Between Idler Gear Bearings (.167”) | — |
| 284 | Part # 38284AK | Shim, F4E Between Idler Gear Bearings (.169”) | — |
| 284 | Part # 38284AL | Shim, F4E Between Idler Gear Bearings (.171”) | — |
| 284 | Part # 38284AM | Shim, F4E Between Idler Gear Bearings (.173”) | — |
| 284 | Part # 38284AN | Shim, F4E Between Idler Gear Bearings (.175”) | — |
| 284 | Part # 38284AP | Shim, F4E Between Idler Gear Bearings (.177”) | — |
| 284 | Part # 38284AQ | Shim, F4E Between Idler Gear Bearings (.179”) | — |
| 284 | Part # 38284AR | Shim, F4E Between Idler Gear Bearings (.181”) | — |
| 284 | Part # 38284AS | Shim, F4E Between Idler Gear Bearings (.183”) | — |
| 284 | Part # 38284AT | Shim, F4E Between Idler Gear Bearings (.185”) | — |
| 284 | Part # 38284AU | Shim, F4E Between Idler Gear Bearings (.187”) | — |
| 288 | Part # 38288A | Cup Race, F4E Differential (Rear) (Use 32255) | — |
| 289 not on diagram | Part # 38289A | Cone Bearing, F4E Differential (Rear) (Use 32254) | — |
| 290 | Part # 38290A | Shim, F4E Differential Cup Race To Case | — |
| 291 | Part # 38291A | Cup Race, F4E Differential (Front) (Use 32255) | — |
| 292 | Part # 38292A | Cone Bearing, F4E Differential (Front) (Use 32254) | — |
| 577 | Part # 38577A | Clutch Hub & Inner Race, F4E Low/Reverse Clutch (34 Teeth Hub) | 1 |
| 584 | Part # 38584AB | Shim, F4E Between Idler Gear Bearings (.154”) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 026 | Part # 38026A | Band, F4E 1990-Up | — |
| 900 not on diagram | Part # 38900A | Servo Assembly, F4E 2-4 Band (1.566”OD) | — |
| 900 not on diagram | Part # 38900B | Servo Assembly, F4E 2-4 Band (2.314”OD) | — |
| 900 not on diagram | Part # 38900C | Servo Assembly, F4E 2-4 Band (1.410”OD) | — |
| 915 not on diagram | Part # 38915A | Strut Assembly, F4E 2-4 Band | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 38500A | Pump, F4E Complete (With 4 Lube Holes Between Rings) | — |
| 500 not on diagram | Part # 38500B | Pump, F4E Complete (With 6 Lube Holes Between Rings) | — |
| 507 not on diagram | Part # S38507PK | Pump Discharge Valve Kit, F4E With Springs (Sonnax) (Increases Pump Flow To Pressure Regulator) | 1 |
| 510 | Part # 38510A | Pump Body W/Gears, F4E (With 3 Lube Holes Between Bolts) | — |
| 510 | Part # 38510B | Pump Body W/Gears, F4E (With 4 Lube Holes Between Bolts) | — |
| 520 | Part # 38520A | Stator, F4E (With 4 Lube Holes Between Rings) | — |
| 520 | Part # 38520B | Stator, F4E (With 6 Lube Holes Between Rings) | — |
| 671 | Part # 38671A | Pump Shaft, F4E Drive (13 9/16” Long) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 38100A | Friction, F4E 3-4 Clutch (.062”) (22 Teeth) 1990-Up | 1 |
| 108 | Part # 38108A | Friction, F4E Forward Clutch (.062”) (42 Teeth) 1990-Up | 1 |
| 110 | Part # 38110A | Friction, F4E Reverse Clutch (.062”) (45 Teeth) 1990-Up | 1 |
| 112 | Part # 38112A | Friction, F4E Coast Clutch (.062”) (16 Teeth) 1990-Up | 1 |
| 114 | Part # 38114A | Friction, F4E Low/Reverse (.062”) (48 Teeth) 1990-Up | 1 |
| 119 not on diagram | Part # 38119A | Friction Module, 4EAT-4F 1990-Up | — |
| 120 | Part # 38120A | Steel, F4E 3-4 Clutch (.063”) (38 Teeth) 1990-Up | — |
| 120 | Part # 38120AA | Steel, F4E 3-4 Clutch (.071”) (38 Teeth) 1990-96 | — |
| 120 | Part # 38120AB | Steel, F4E 3-4 Clutch (.091”) (38 Teeth) 1990-97 | — |
| 120 | Part # 38120AC | Steel, F4E 3-4 Clutch (.130”) (38 Teeth) 1998-Up | — |
| 128 | Part # 38128A | Steel, F4E Forward Clutch (.063”) (32 Teeth) 1990-Up | — |
| 130 | Part # 38130A | Steel, F4E Reverse Clutch (.063”) (32 Teeth) 1990-Up | — |
| 131 | Part # 38131A | Steel, F4E Reverse Clutch (.057”) 6 7/8”OD (Dished) 1990-Up | — |
| 132 | Part # 38132A | Steel, F4E Coast Clutch (.063”) (26 Teeth) 1990-Up | — |
| 134 | Part # 38134A | Steel, F4E Low/Reverse Clutch (.063”) (16 Teeth) 1990-Up | — |
| 140 | Part # 38140A | Pressure Plate, F4E 3-4 Clutch (.140”) | 1 |
| 140 | Part # 38140B | Pressure Plate, F4E 3-4 Clutch (.175”) | — |
| 148 | Part # 38148A | Pressure Plate, F4E Forward Clutch (.155”)(32 Teeth)(4.333”ID) 1990-Up | — |
| 148 | Part # 38148B | Pressure Plate, F4E Forward Clutch (.180”)(32 Teeth)(4.333”ID) 1990-Up | — |
| 150 | Part # 38150A | Pressure Plate, F4E Reverse Clutch | — |
| 152 | Part # 38152A | Pressure Plate, F4E Coast Clutch | 1 |
| 154 | Part # 38154A | Pressure Plate, F4E Low/Reverse Clutch | — |
| 853 | Part # 38853A | Cushion, F4E Forward Clutch | — |
| 856 | Part # 38856A | Cushion, F4E Coast Clutch | — |
| 902 not on diagram | Part # 38902A | Piston, F4E 2-4 Servo | — |
| 960 | Part # 38960A | Piston, F4E 3-4 Clutch | — |
| 966 | Part # 38966A | Piston, F4E Reverse Clutch | — |
| 967 | Part # 38967A | Piston, F4E Low/Reverse Clutch | — |
| 969 | Part # 38969A | Piston, F4E Coast Clutch | — |
| 970 | Part # 38970A | Spring, F4E 3-4 Clutch Return | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 550 | Part # 38550A | Drum, F4E 3-4 Clutch (Stamped Steel) With 38 Holes Outside | — |
| 550 | Part # 38550B | Drum, F4E 3-4 Clutch (Stamped Steel) With 57 Holes Outside | — |
| 550 | Part # 38550C | Drum, F4E 3-4 Clutch (Smooth Outside) With 57 Holes Outside | — |
| 556 | Part # 38556A | Drum, F4E Reverse & Forward Clutch | — |
| 558 | Part # 38558A | Drum, F4E (Band Drum) With Sun Gear 1986-Up | 1 |
| 559 | Part # 38559A | Drum, F4E Coast Clutch | — |
| 574 | Part # 38574A | Clutch Hub, F4E Forward Clutch (Less Sprag) | — |
| 579 | Part # 38579A | Clutch Hub, F4E Coast Clutch (With Inner Race) | — |
| 584 | Part # 38584A | Planet, F4E (34 Teeth On Flange) With .275” Tall Step In Center Of Flange (Inside Where #245 Washer Sets) | — |
| 584 | Part # 38584B | Planet, F4E (34 Teeth On Flange) No Raised Step In Center Of Flange (Inside Where #245 Washer Sets) | — |
| 594 | Part # 38594A | Ring Gear, F4E Planet (10 Lugs, 5 1/8”OD) | — |
| 614 | Part # 38614A | Sun Gear, F4E (2 13/16” Long) | — |
| 626 | Part # 38626A | Shell, F4E Output With 19 Lug Park Gear | 1 |
| 626 | Part # 38626AA | Shell, F4E Output With 12 Lug Park Gear | — |
| 642 | Part # 38642A | Sprag, F4E Low/Reverse With Outer Race (.590” Wide) | 1 |
| 642 | Part # 38642AA | Sprag, F4E Low/Reverse With Outer Race (.605” Wide) | — |
| 648 not on diagram | Part # 38648A | Sprag Assembly, F4E Forward With Inner & Outer Race | — |
| 658 | Part # 38658A | Sprag, F4E Forward | 1 |
| 673 | Part # 38673A | Turbine Shaft, F4E (11 3/8” Long) | — |
| 679 | Part # 38679A | Shaft, F4E Idler Gear | — |
| 714 | Part # 38714AK | Idler Gear, F4E With Bearings (39 Teeth) 1 3/16” Thick (3 Groove) | — |
| 714 | Part # 38714BK | Idler Gear, F4E With Bearings (40 Teeth) 1 Groove | — |
| 714 | Part # 38714CK | Idler Gear, F4E With Bearings (38 Teeth) 1.150” Thick (4 Grooves) | — |
| 714 | Part # 38714DK | Idler Gear, F4E With Bearings (41 Teeth) | — |
| 715 not on diagram | Part # 38715A | Differential Assembly, F4E With Ring Gear (71 Teeth) 3 Groove (Fits 38714AK & 38730B) | — |
| 715 not on diagram | Part # 38715AA | Differential Assembly, F4E With Ring Gear (71 Teeth) 1 Groove (Fits 38715BK & 38730A) | — |
| 715 not on diagram | Part # 38715AB | Differential Assembly, F4E With Ring Gear (71 Teeth) 4 Groove | — |
| 715 not on diagram | Part # 38715B | Differential Assembly, F4E With Ring Gear (70 Teeth) 1 Groove | — |
| 715 not on diagram | Part # 38715C | Differential Assembly, F4E With Ring Gear (69 Teeth) 1 Groove | — |
| 715 not on diagram | Part # 38715CA | Differential Assembly, F4E With Ring Gear (69 Teeth) 2 Groove | — |
| 715 not on diagram | Part # 38715CC | Differential Assembly, F4E With Ring Gear (69 Teeth) 1 Wide Groove On Bearing Side | — |
| 715 not on diagram | Part # 38715CD | Differential Assembly, F4W With Ring Gear (69 Teeth) 1 Narrow Groove On Bearing Side (Fits 38714DK & 38730D) | — |
| 715 not on diagram | Part # 38715CE | Differential Assembly, F4E With Ring Gear (69 Teeth) 1 Wide Groove On Housing Side | — |
| 715 not on diagram | Part # 38715D | Differential Assembly, F4E With Ring Gear (73 Teeth) 3 Groove | — |
| 715 not on diagram | Part # 38715DA | Differential Assembly, F4E With Ring Gear (73 Teeth) 4 Groove (Fits 38714CK & 38730C) | — |
| 715 not on diagram | Part # 38715E | Differential Assembly, F4W With Ring Gear (78 Teeth) | — |
| 730 | Part # 38730A | Pinion, F4E Output Gear With Bearings (19 Teeth) 33 Splines (1 Groove) | — |
| 730 | Part # 38730B | Pinion, F4E Output Gear With Bearings (20 Teeth) 33 Splines (3 Groove) | — |
| 730 | Part # 38730C | Pinion, F4E Output Gear With Bearings (21 Teeth) 33 Splines (4 Groove) | — |
| 730 | Part # 38730D | Pinion, F4E Output Gear With Bearings (17 Teeth) 33 Splines (1 Groove) | — |
| 730 | Part # 38730E | Pinion, F4E Output Gear With Bearings (18 Teeth) 33 Splines (1 Groove) | — |
| 730 | Part # 38730EA | Pinion, F4E Output Gear With Bearings (18 Teeth) (2 Wide Grooves) | — |
| 735 | Part # 38735A | Cover, F4E Idler Gear | — |
| 750 | Part # 38750 | Bell Housing, F4E (Top Bolts 5 1/8”) No Crank Sensor Hole (Cast # FB03) | 1 |
| 750 | Part # 38750A | Bell Housing, F4E (Top Bolts 5 1/8”) No Crank Sensor Hole (Cast # FU65) | 1 |
| 750 | Part # 38750AA | Bell Housing, F4E (Top Bolts 5 1/8”) With Crank Sensor Hole | — |
| 750 | Part # 38750B | Bell Housing, F4E (Top Bolts 6 1/4”) No Crank Sensor Hole (Cast #FU60) | 1 |
| 750 | Part # 38750BA | Bell Housing, F4E (Top Bolts 6 1/4”) With Crank Sensor Hole (Cast # FW01) | 1 |
| 750 | Part # 38750BB | Bell Housing, F4E (Top Bolts 6 1/4”) No Crank Sensor Hole (Cast #FW30) | 1 |
| 750 | Part # 38750BC | Bell Housing, F4E (Top Bolts 6 1/4”) With Crank Sensor Hole (Cast # K2A2) | 1 |
| 750 | Part # 38750C | Bell Housing, F4E (Top Bolts 2 1/8”) Cast # FW12 | 1 |
| 750 | Part # 38750D | Bell Housing, F4E (Top Bolts 4 7/8”) With Crank Sensor Hole (Cast # K25R) | 1 |
| 760 | Part # 38760A | Case, F4E (13 Bolts To Bell) Uses Throttle Cable (3 Threaded Bosses On Top For Wire Harness, 2 Are 6mm And 1 Is 12mm) | — |
| 760 | Part # 38760AA | Case, F4E (13 Bolts To Bell) Uses A Throttle Cable (3 Threaded Bosses On Top For Wire Harness, All 3 Are 6mm) | — |
| 760 | Part # 38760AB | Case, F4E (13 Bolts To Bell) Uses A Throttle Cable (2 Threaded Bosses On Top For Wire Harness, Both Are 6mm) There Is… | — |
| 760 | Part # 38760B | Case, F4E (13 Bolts To Bell) No Throttle Cable (Cast # KIA) With 4 Threaded Mounting Bosses | — |
| 760 | Part # 38760BA | Case, F4E (13 Bolts To Bell) No Throttle Cable With 3 Threaded Mounting Bosses | — |
| 774 | Part # 38774A | Speed-O Housing, F4E (With 22 Teeth Gear & 2 Prong Connector) (Cast # F7C6-17271-AB) Aluminum Housing With Plastic… | 1 |
| 774 | Part # 38774AA | Speed-O Housing, F4E (With 22 Teeth Gear & 2 Prong Rectangle Connector) (Cast # TR0100) All Plastic | 1 |
| 774 | Part # 38774B | Speed-O Housing, F4E (With 23 Teeth Gear & 2 Prong Connector) (Cast # FOC6-17271-AB) Aluminum Housing With Plastic… | 1 |
| 847 | Part # 28847A | Gear, F4E Speed-O Drive (25 Teeth) On Differential | — |
| 848 | Part # 28848AK | Gear & Housing, F4E Speed-O Driven (20 Teeth) | — |
| 904 | Part # 38904A | Cover, F4E 2-4 Servo | — |
| 904 | Part # 38904B | Cover, F4E 2-4 Servo (2.314”ID) | — |
| 904 | Part # 38904C | Cover, F4E 2-4 Servo (1.410”ID) | — |
| 995 not on diagram | Part # 38995A | Park Pawl Assembly, F4E | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 089 not on diagram | Part # 38089A | Retainer, F4E Front Seal (3 Bolt Metal) | — |
| 417 not on diagram | Part # 38417A | Pulse Generator, F4E | — |
| 475 | Part # 38475A | Sleeve, F4E Turbine Shaft (Teflon) | — |
| 799 | Part # 38799A | Nut, F4E Idler Gear | — |
| 854 | Part # 38854A | Retainer, F4E Reverse Clutch Spring | — |
| 857 | Part # 38857A | Waved Ring, F4E Low/Reverse Clutch (Solid Ring) 1990-97 | — |
| 857 | Part # 38857B | Waved Ring, F4E Low/Reverse Clutch (Split, Not Solid) 1997-Up | — |
| 862 | Part # 38862A | Snap Ring, F4E Holds 3-4 Clutch Retainer In Drum | — |
| 865 | Part # 38865A | Snap Ring, F4E Holds Low/Reverse Clutch Retainer In Case | — |
| 870 | Part # 38870A | Snap Ring, F4E Holds Low/Reverse Sprag In Case | — |
| 876 | Part # 38876A | Snap Ring, F4E Holds Forward Pressure Plate In Drum | — |
| 878 | Part # 38878A | Snap Ring, F4E Holds Coast Clutch Pressure Plate In Case | — |
| 879 | Part # 38879A | Snap Ring, F4E Holds Coast Clutch Retainer In Drum | — |
| 880 | Part # 38880A | Snap Ring, F4E Sun Gear To Inner Race (Rear) | — |
| 881 | Part # 38881A | Snap Ring, F4E Sun Gear To Inner Race (Front) | — |
| 882 | Part # 38882A | Snap Ring, F4E Planet To Low/Reverse Sprag Inner Race | — |
| 889 | Part # 38889A | Snap Ring, F4E Holds Ring Gear In Output Shell | — |
| 890 | Part # 38890A | Snap Ring, F4E Holds 3-4 Clutch Pressure Plate In Drum | — |
| 891 | Part # 38891A | Snap Ring, F4E Holds Low/Reverse Pressure Plate In Case | — |
| 892 | Part # 38892A | Snap Ring, F4E Holds Reverse Pressure Plate In Drum | — |
| 893 | Part # 38893A | Snap Ring, F4E Holds Reverse Clutch Retainer In Drum | — |
| 895 | Part # 38895A | Snap Ring, F4E Holds Turbine Shaft To Reverse Drum | — |
| 896 | Part # 38896A | Snap Ring, F4E Holds Servo Cover In Case | — |
| 901 | Part # 28901 | Spring, F4E Servo (3 Per Pack) 1.654” Long | — |
| 901 | Part # 28901A | Spring, G4A Servo (3 Per Pack) Corrects 2-3 Flare Up & 1-2 Or 3-4 Slide Or Run Away (TTK) | — |
| 901 | Part # 38901AA | Spring, F4E Servo (3 Per Pack) (Corrects Rough 1-2 & 3-4 Upshift / Helps Prevent Rough 2-3) | — |
| 976 | Part # 38976A | Spring, F4E Reverse Beveled Return | — |
| 977 | Part # 38977A | Retainer W/Spring, F4E Low/Reverse Clutch | — |
| 979 | Part # 38979A | Retainer W/Spring, F4E Coast Clutch | — |
| 980 | Part # 38980A | Retainer, F4E 3-4 Clutch Spring | — |
| 991 not on diagram | Part # 38991A | Linkage Assembly, F4E Internal | — |
| 996 | Part # 38996A | Fitting, F4E Cooler Line | — |
| 999 not on diagram | Part # 38999A | Tube, F4E Oil | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.