AF13 / 42LE / AF17 parts diagram
Same diagram:
42LE, AF17
Transmission page:
Positions:
135 total, 115 on the diagram
Parts:
139 total, 42 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 121002A | Overhaul Kit, 60-40LE/60-42LE/60-41SN 1995-Up | — |
| 004 not on diagram | Part # 121004A | Master L/Steels Kit, 60-40LE/60-42LE/60-41SN 1995-Up | — |
| 006 not on diagram | Part # 121006A | Master W/Steels Kit, 60-40LE/60-42LE/60-41SN 1995-Up | — |
| 030 not on diagram | Part # 121030 | Bushing Kit, 60-40LE 1993-Up | — |
| 175 not on diagram | Part # 121175 | Ring Kit, 60-40LE | — |
| 564 not on diagram | Part # 121564A | Piston Kit, 60-40LE Forward Clutch | — |
| 566 not on diagram | Part # 121566A | Piston Kit, 60-40LE Reverse Clutch (For 2 Clutch Drum) (20 Spring Pockets) (18 Spring Retainer) (.031” Thick Snap Ring) | — |
| 567 not on diagram | Part # 121567A | Piston Kit, 60-40LE Low / Reverse Clutch (Cast # 3B) Piston 1.265” Thick x 6 1/8” OD (Retainer Is Same OD) | — |
| 569 not on diagram | Part # 121569A | Piston Kit, 60-40LE 3-4 Coast Clutch (16 Springs) (8 Lug Piston) (2.150”ID) | — |
| 778 | Part # 121778AK | Bolt Set, 60-40LE Holds Stator To Body (8 Pieces) | — |
| 786 | Part # 121786AK | Bolt Set, 60-40LE Differential Ring Gear With Lock Tabs (8 Per Set) | — |
| 999 | Part # 121999A | Oil Tube Set, 60-40LE | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 121421A | Solenoid, 60-40LE Shift | 1 |
| 425 | Part # 121425A | Solenoid, 60-40LE Lock-Up | — |
| 431 | Part # 121431A | Solenoid, 60-40LE Duty | 1 |
| 740 | Part # 121740A | Valve Body, 60-40LE (4 Solenoid Type) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 121410A | Switch, 60-40LE Neutral Safety (Tag # 60A030) (Tag #60A050) and 9 Blade Connector | 1 |
| 436 | Part # 121436A | Sensor, 60-40LE Output Speed (Reads Off The Pinion Nut) (Grey) | 1 |
| 438 | Part # 121438A | Sensor, 60-40LE Turbine Shaft (Reads Off The Forward Drum) (Black) | 1 |
| 445 not on diagram | Part # 121445A | Wire Harness, 60-40LE External | — |
| 446 | Part # 121446A | Wire Harness, 60-40LE Internal (7 Prong Case Connector) With 5 2-Prong Connectors | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 121010A | Filter, 60-40LE/60-42LE/60-41SN 1995-Up | 1 |
| 766 | Part # 121766A | Pan, 60-40LE Side (Aluminum) Cast # 35151-60A050 (13 Bolt) | 2 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 121070A | Replaced by 57070A | — |
| 076 | Part # 121076A | Seal, 60-40LE/41SN/42LE Axle (Case Side) 1995-Up (Also Fits The Bell Housing Side 1995-E97) | — |
| 077 | Part # 121077A | Seal, 60-40LE/41SN/42LE Axle (Bell Housing Side) 1995-E97 (Use 121076A) | — |
| 077 | Part # 121077AA | Seal, 60-40LE/41SN/42LE Axle (Bell Housing Side) L1997-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 211 | Part # 121211A | Washer, 60-40LE Stator To Reverse Clutch Drum (.060”) Plastic (1 Tab) | — |
| 214 | Part # 121214A | Washer, 60-40LE Rear Ring Gear Hub To 3-4 Coast Clutch Drum (4 Tab) Plastic | — |
| 219 not on diagram | Part # 121219A | Race, 60-40LE Forward Sprag (40 Teeth) (2.460”ID) (.117” Thick) | — |
| 223 | Part # 121223A | Caged Bearing, 60-40LE Rear Cover (BKM131715J) | — |
| 228 | Part # 121228A | Bearing W/Races, 60-40LE Stator To Reverse Clutch Hub Input Shaft | 1 |
| 229 | Part # 121229A | Caged Bearing, 60-40LE Stator To Reverse Drum (1.770”OD) (.468” Wide) | 1 |
| 232 | Part # 121232A | Bearing W/Races, 60-40LE Forward Clutch Drum To Rear Cover (1.231”OD) (.639”ID) (.140” Thick) | — |
| 234 | Part # 121234A | Washer, 60-40LE Forward Clutch Drum To 3-4 Coast Clutch Drum (4 Tab) Plastic | — |
| 238 | Part # 121238A | Bearing W/Race, 60-40LE Planet To Front Ring Gear Hub (3.276”OD) | 1 |
| 239 | Part # 121239A | Race, 60-40LE Planet To Front Ring Gear Hub (4 Tab) | 1 |
| 247 | Part # 121247A | Bearing W/Race, 60-40LE Sun Gear To Rear Ring Gear Hub (1.270”OD) (.745”ID) Also Fits Forward Drum To Rear Ring Gear… | 1 |
| 248 | Part # 121248A | Race, 60-40LE Sun Gear To Rear Ring Gear Hub | 1 |
| 250 | Part # 121250A | Race, 60-40LE Planet To Rear Ring Gear Hub (4 Tab) | 1 |
| 251 | Part # 121251A | Bearing W/Race, 60-40LE Planet To Rear Ring Gear Hub | 1 |
| 252 | Part # 121252A | Race, 60-40LE Sprag To Front Ring Gear (Plastic) (.058” Thick) | — |
| 253 | Part # 121253A | Bearing W/Race, 60-40LE Low / Reverse Inner Race To Front Planet (2.550”ID) | — |
| 254 | Part # 121254A | Race, 60-40LE Low / Reverse Sprag Inner Race Spacer Bearing (2.690”ID) | — |
| 255 | Part # 121255A | Spacer, 60-40LE Low / Reverse Inner Race To Bearing Race (.078”) | — |
| 256 | Part # 121256A | Bearing W/Race, 60-40LE Input Shaft To Reverse Clutch Pressure Plate (1.225”OD) (.738”ID) (.110” Thick) | — |
| 257 | Part # 121257A | Race, 60-40LE Input Shaft To Reverse Clutch Pressure Plate (.079”) (1.310”OD) | — |
| 258 | Part # 121258A | Washer, 60-40LE Reverse Clutch Pressure Plate To Drive (.056” Thick) (4 Tabs) | — |
| 259 | Part # 121259A | Replaced by 121247A | — |
| 260 | Part # 121260A | Race, 60-40LE Forward Drum To Rear Ring Gear Hub | — |
| 273 | Part # 121273A | Inner Race, 60-40LE Pinion Shaft To Roller Bearing (06NU0716/20 KOYO) | — |
| 276 | Part # 121276A | Roller Bearing, 60-40LE Pinion Shaft To Bell Housing (Cast # RNU090716-1) Also Fits Pinion Shaft To Case | 2 |
| 277 | Part # 121277A | Bearing W/Race, 60-40LE Driven Transfer Gear To Case | 1 |
| 278 | Part # 121278A | Race, 60-40LE Driven Transfer Gear To Case | 1 |
| 279 | Part # 121279A | Ball Bearing, 60-40LE Drive Transfer Gear Support (2 Rolls Of Ball Bearings) (FBD49-1 G NSK) | — |
| 280 | Part # 121280A | Race, 60-40LE Pinion Shaft To Bell Housing | 1 |
| 281 | Part # 121281A | Bearing W/Race, 60-40LE Pinion Shaft To Bell Housing | 1 |
| 288 | Part # 121288A | Cup Race, 60-40LE Differential Housing To Bell (Cast # TR080702J) Also Fits Differential Housing To Case # 291) | 1 |
| 289 | Part # 121289A | Cone Bearing, 60-40LE Differential Housing To Bell Housing (Cast # TRO80702J) Also Fits Differential Housing To Case… | 1 |
| 291 | Part # 121291A | Replaced by 121288A | — |
| 292 | Part # 121292A | Replaced by 121289A | — |
| 663 | Part # 121663A | Outer Race, 60-40LE Forward Sprag (.573” Thick) (2.663”ID) (44 Teeth) | — |
| 664 | Part # 121664A | Inner Race, 60-40LE Low / Reverse Sprag (.670” Thick) (3.835”OD) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 121022A | Band, 60-40LE Intermediate (Flex) 1993-Up | 1 |
| 905 not on diagram | Part # 121905A | Servo Assembly, 60-40LE Intermediate | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 121500A | Complete Pump, 60-40LE (Cast Letter “C”) | — |
| 510 not on diagram | Part # 121510A | Pump Body, 60-40LE With Gears (Cast Letter “C”) | — |
| 520 | Part # 121520A | Stator, 60-40LE (Cast Letter “C”) | 1 |
| 530 | Part # 121530A | Pump Gear Set, 60-40LE (.373” Thick) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 121100A | Friction, 60-40LE 3-4 Clutch (.067”) (51 Teeth) (Also Forward Clutch) | 1 |
| 108 | Part # 121108A | Replaced by 121100A | 1 |
| 110 | Part # 121110A | Friction, 60-40LE Reverse Clutch (.075”) (42 Teeth) (5.257”OD) | 1 |
| 112 | Part # 121112A | Friction, 60-40LE Coast Clutch (.707”) (44 Teeth) | 1 |
| 114 | Part # 89114A | Friction, 50-40/50-42LE Low/Reverse Clutch (.067”) (33 Teeth) (6.302”OD) 1989-Up (Smooth Lining) | 1 |
| 119 not on diagram | Part # 121119A | Friction Module, AW60-40LE 1995-Up | — |
| 120 | Part # 121120A | Steel, 60-40LE 3-4 Clutch (.071”) (36 Teeth) | 1 |
| 128 | Part # 121128A | Steel, 60-40LE Forward Clutch (.069”) (20 Teeth) | — |
| 130 | Part # 121130A | Steel, 60-40LE Reverse Clutch (.071”) (15 Lugs) (4.092”ID) | 1 |
| 132 | Part # 121132A | Steel, 60-40LE Coast Clutch (.072”) (16 Teeth) | 1 |
| 134 | Part # 121134A | Steel, 60-40LE Low / Reverse Clutch (.071”) (15 Teeth) | 1 |
| 139 not on diagram | Part # 121139A | Steel Module, AW60-40LE 1995-Up | — |
| 140 | Part # 121140AB | Pressure Plate, 60-40LE 3-4 Clutch (Top) (.142”) (36 Teeth) Also Fits 3-4 Clutch Bottom | — |
| 140 | Part # 121140AC | Pressure Plate, 60-40LE 3-4 Clutch (Top) (.150”) (36 Teeth) Also Fits 3-4 Clutch Bottom | — |
| 148 | Part # 121148AB | Pressure Plate, 60-40LE Forward Clutch (Top) (.142”) | — |
| 148 | Part # 121148AC | Pressure Plate, AW60-40LE Forward Clutch (top) (.150”) (20 Teeth) | — |
| 150 | Part # 121150A | Pressure Plate, 60-40LE Reverse Clutch With Splined Hub (15 Lugs) (.160” Thick At Edge) | — |
| 152 | Part # 121152AB | Pressure Plate, 60-40LE Coast Clutch (Top) (.126”) (16 Teeth) Also Fits Coast Clutch Bottom | — |
| 152 | Part # 121152AE | Pressure Plate, 60-40LE Coast Clutch (Top) (.155”) (16 Teeth) Also Fits Coast Clutch Bottom | — |
| 155 | Part # 121155A | Pressure Plate, 60-40LE Low / Reverse Clutch (Top) (.42”) (15 Teeth) Also Fits Low / Reverse Clutch Bottom | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 550 | Part # 121550A | Drum, 60-40LE 3-4 Coast Clutch | — |
| 554 | Part # 121554A | Drum, 60-40LE Forward Clutch (2 Clutch) (20 Teeth Steels) | — |
| 556 | Part # 121556A | Drum, 60-40LE Reverse Clutch (2 Clutch) | — |
| 570 | Part # 121570A | Hub, 60-40LE 3-4 Clutch Hub | — |
| 584 | Part # 121584A | Planet, 60-40LE (Uses A 26 Teeth / 35 Teeth Sun Gear) | 1 |
| 592 | Part # 121592A | Ring Gear, 60-40LE Rear & Coast Clutch Hub | — |
| 594 | Part # 121594A | Ring Gear, 60-40LE Front & Low/Reverse Clutch Hub (33 Outer Teeth) (2.270” Thick) | — |
| 602 | Part # 121602A | Hub, 60-40LE Rear Ring Gear (.833”ID) (4 Holes) | — |
| 604 | Part # 121604A | Hub, 60-40LE Front Ring Gear (98 Teeth) (2.615”ID) | — |
| 614 | Part # 121614A | Sun Gear, 60-40LE (26 Teeth / 35 Teeth) | 1 |
| 652 | Part # 121652A | Sprag, 60-40LE Forward With Brass Races (22 Lugs) (.434” Thick) | 1 |
| 654 | Part # 121654A | Sprag, 60-40LE Low / Reverse With Brass Races (24 Lugs) (.450” Thick) | — |
| 670 | Part # 121670A | Shaft, 60-40LE Input With Reverse Clutch Hub (16 Converter Splines / 16 Rear Splines) 12 1/2” Long (44 Teeth) Clutch… | — |
| 710 not on diagram | Part # 121710A | Gear, 60-40LE Drive Transfer (53 Teeth) | 1 |
| 712 | Part # 121712A | Gear, 60-40LE Driven Transfer (54 Teeth) Fits 121720A Drive Gear (With 12 Park Lugs) | — |
| 716 | Part # 121716A | Differential Housing, 60-40LE With Spider Gears (.980”ID Axle Hole) | — |
| 720 not on diagram | Part # 121720A | Ring Gear, 60-40LE Differential (87 Teeth / 3 Groove) Fits 121730A Pinion | — |
| 730 | Part # 121730A | Pinion, 60-40LE Shaft (23 Teeth / 3 Groove) Fits 121720A Ring Gear | — |
| 750 | Part # 121750A | Bell Housing, 60-40LE (Cast # 60A080) | 1 |
| 759 | Part # 121759A | Rear Cover, 60-40LE (Cast # 35143-60A010) (10 Bolt ) Aluminum | 2 |
| 760 | Part # 121760A | Case, 60-40LE (Pink Tag With # 60-42LE) | 1 |
| 774 | Part # 121774A | Speed-O Housing, 60-40LE (With 20 Teeth Driven Gear) With 2 Prong Connector | — |
| 847 | Part # 121847A | Gear, 60-40LE Speed-O (23 Teeth) Plastic | — |
| 995 | Part # 121995A | Park Pawl Assembly, 60-40LE | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 492 not on diagram | Part # 121492A | Drain Plug, 60-40LE (Allen Head) | — |
| 494 | Part # 121494A | Tube, 60-40LE Filler Tube With Dipstick | — |
| 698 | Part # 121698A | Oil Baffle, 60-40LE Differential To Bell Housing (3 Bolt Tin) | — |
| 699 | Part # 121699A | Oil Baffle, 60-40LE Differential To Case (3 Bolt Tin) | — |
| 735 | Part # 121735A | Oil Baffle, 60-40LE Pinion Shaft To Bell (1 Bolt) | — |
| 795 | Part # 121795A | Nut, 60-40LE Hold Drive Transfer Gear To Bearing Support (2.158”OD At Flats) | — |
| 796 | Part # 121796A | Nut, 60-40LE Pinion Shaft Roller Bearing (12 Teeth Rotor) Right Hand Threads | — |
| 861 | Part # 121861A | Snap Ring, 60-40LE Holds Rear Ring Gear To Hub | — |
| 863 | Part # 121863A | Replaced by 89889A | — |
| 870 not on diagram | Part # 121870A | Replaced by 121890A | — |
| 871 | Part # 121871A | Snap Ring, 60-40LE Coast Clutch Retainer (.040” Thick) (2.210”OD) | — |
| 876 | Part # 121876A | Snap Ring, 60-40LE Holds Forward Clutch Pressure Plate In Drum | — |
| 877 | Part # 121877A | Snap Ring, 60-40LE Forward Retainer (.040” Thick) (2.135”OD) | — |
| 883 | Part # 121883A | Snap Ring, 60-40LE Holds Forward Sprag In Rear Ring Gear | — |
| 884 | Part # 89884A | Snap Ring, 50-40/50-42LE Low/Reverse Retainer (6 5/8”OD) (.047” Thick) | — |
| 885 | Part # 121885A | Snap Ring, 60-40LE Holds Low / Reverse Clutch Top Pressure Plate (.063”) | — |
| 886 | Part # 121886A | Snap Ring, 60-40LE Holds Low / Reverse Sprag In Front Ring Gear (.039” Thick) (4 13/16”OD) | — |
| 889 | Part # 89889A | Snap Ring, 50-40/50-42LE Rear Hub To Ring Gear (.055” Thick) (5 1/4”OD) 2 Holes In Ends | — |
| 890 | Part # 121890A | Snap Ring, 60-40LE Holds 3-4 Clutch Pressure Plate In Drum (Also Holds Coast Clutch Pressure Plate In Drum) | — |
| 891 | Part # 121891A | Snap Ring, 60-40LE Reverse Clutch Pressure Plate (Bottom) (.047” Thick) | — |
| 892 | Part # 121892A | Snap Ring, 60-40LE Reverse Clutch Pressure Plate (Top) (.063”) (5 5/8”OD) | — |
| 893 | Part # 121893A | Snap Ring, 60-40LE Reverse Clutch Retainer (2.615”OD) (.031” Thick) | — |
| 897 | Part # 121897A | Snap Ring, 60-40LE Holds Drive Gear In Case (3.260”OD) (.078” Thick) Waved | — |
| 991 | Part # 121991A | Linkage, 60-40LE Internal | — |
| 992 | Part # 121992A | Shift Lever, 60-40LE External | — |
| 994 | Part # 121994A | Park Pawl Actuator, 60-40LE | 1 |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.