4T65E / 4T60E parts diagram
Same diagram:
4T60E
Transmission page:
Positions:
312 total, 227 on the diagram
Parts:
1071 total, 595 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 84000 | Paper & Rubber Kit, 440-T4 1983-92 (For Allante Use 84001 Also) | — |
| 000 not on diagram | Part # 84000E | Paper & Rubber Kit, 4T60E 1991-Up | — |
| 000 not on diagram | Part # 84000EW | Paper & Rubber Kit, 4T60E (Bonded Pan Gasket) 1991-Up | — |
| 000 not on diagram | Part # 84000G | Paper & Rubber Kit, 4T65E 1997-Up | — |
| 000 not on diagram | Part # 84000GW | Paper & Rubber Kit, 4T65E (Bonded Pan Gasket)(W/Out Side Cover Gasket) 1997-Up | — |
| 001 not on diagram | Part # 84001 | Sub Kit, 440-T4 (Allante) Valve Body Gaskets & O-Rings 1987-92 | — |
| 001 not on diagram | Part # 84001G | Sub Kit, 4T65E (Aztek/Venture & Rendezvous/Montana AWD) (Transfer Case) 2001-Up | — |
| 001 not on diagram | Part # 84001H | Sub Kit, 4T65E (Volvo) 1999-Up (Valve Body Sub Kit Only) | — |
| 002 not on diagram | Part # 84002 | Overhaul Kit, 440-T4 (W/Vespel Rings) 1983-92 (For Allante Use 84001 Also) | — |
| 002 not on diagram | Part # 84002E | Overhaul Kit, 4T60E 1992-Up (For Bonded Pistons Sell A84962E & A84965A) | — |
| 002 not on diagram | Part # 84002EW | Overhaul Kit, 4T60E (Bonded Pan Gasket) 1991-Up | — |
| 002 not on diagram | Part # 84002G | Overhaul Kit, 4T65E 1997-Up | — |
| 002 not on diagram | Part # 84002GW | Overhaul Kit, 4T65E (W/Bonded Bottom Pan Gasket) 1997-Up (Without Side Cover Gasket)… | — |
| 002 not on diagram | Part # 84002HW | Overhaul Kit, 4T65E (Volvo) (With Bonded Bottom Pan Gasket) 1999-Up (Without Side Cover Gasket)… | — |
| 004 not on diagram | Part # 84004 | Master L/Steel Kit, 440-T4 (W/Vespel Rings) 1983-E86 | — |
| 004 not on diagram | Part # 84004A | Master L/Steel Kit, 440-T4 (W/Vespel Rings) 1983-88 (For Allante Use 84001 Also) | — |
| 004 not on diagram | Part # 84004B | Master L/Steel Kit, 440-T4 (W/Vespel Rings) 1989-92 (For Allante Use 84001 Also) | — |
| 004 not on diagram | Part # 84004E | Master L/Steel Kit, 4T60E 1991-E94 (Uses .090” Input Frictions)(For Bonded Pistons Sell A84962E & A84965A) | — |
| 004 not on diagram | Part # 84004EA | Master L/Steel Kit, 4T60E L1994-Up (Uses .065” Input Frictions)(For Bonded Pistons Sell A84962E & A84965A) | — |
| 004 not on diagram | Part # 84004EAW | Master L/Steel Kit, 4T60E (Bonded Pan Gasket) L1994-Up (For Bonded Pistons Sell A84962E & A84965A) | — |
| 004 not on diagram | Part # 84004EW | Master L/Steel Kit, 4T60E (Bonded Pan Gasket) 1991-E94(For Bonded Pistons Sell A84962E & A84965A) | — |
| 004 not on diagram | Part # 84004G | Master L/Steel Kit, 4T65E 1997-Up (For Bonded Pistons Sell A84962E & A84965A) | — |
| 004 not on diagram | Part # 84004GAW | Master L/Steel Kit, 4T65E (W/Bonded Bottom Pan Gasket) 2003-Up (W/Out Side Cover Gasket)… | — |
| 004 not on diagram | Part # 84004GW | Master L/Steel Kit, 4T65E (W/Bonded Bottom Pan Gasket) 1997-02 (W/Out Side Cover Gasket)… | — |
| 004 not on diagram | Part # 84004HAW | Master L/Steels Kit, 4T65E (Volvo)(W/Bonded Bottom Pan Gasket) 2003-Up (W/Out Side Cover Gasket)… | — |
| 004 not on diagram | Part # 84004HW | Master L/Steels Kit, 4T65E (Volvo)(W/Bonded Bottom Pan Gasket) 1999-02 (W/Out Side Cover Gasket)… | — |
| 006 not on diagram | Part # 84006 | Master W/Steel Kit, 440-T4 (W/Vespel Rings) 1983-E86 | — |
| 006 not on diagram | Part # 84006A | Master W/Steel Kit, 440-T4 (W/Vespel Rings) L1986-88 (For Allante Use 84001 Also) | — |
| 006 not on diagram | Part # 84006B | Master W/Steel Kit, 440-T4 (W/Vespel Rings) 1989-92 (For Allante Use 84001 Also) | — |
| 006 not on diagram | Part # 84006E | Master W/Steel Kit, 4T60E 1991-E94 (Uses .090” Input Frictions)(For Bonded Pistons Sell A84962E & A84965A) | — |
| 006 not on diagram | Part # 84006EA | Master W/Steel Kit, 4T60E L1994-Up (Uses .065” Input Frictions)(For Bonded Pistons Sell A84962E & A84965A) | — |
| 006 not on diagram | Part # 84006EAW | Master W/Steel Kit, 4T60E (Bonded Pan Gasket) L1994-Up (For Bonded Pistons Sell A84962E & A84965A) | — |
| 006 not on diagram | Part # 84006EW | Master W/Steel Kit, 4T60E (Bonded Pan Gasket) 1991-E94 (For Bonded Pistons Sell A84962E & A84965A) | — |
| 006 not on diagram | Part # 84006G | Master W/Steel Kit, 4T65E 1997-Up (For Bonded Pistons Sell A84962E & A84965A) | — |
| 006 not on diagram | Part # 84006GAW | Master W/Steel Kit, 4T65E (W/Bonded Bottom Pan Gasket) 2003-Up (W/Out Side Cover Gasket)… | — |
| 006 not on diagram | Part # 84006GW | Master W/Steel Kit, 4T65E (W/Bonded Pan Gasket) 1997-Up (W/Out Side Cover Gasket)… | — |
| 006 not on diagram | Part # 84006HAW | Master W/Steels Kit, 4T65E (Volvo) (With Bonded Bottom Pan Gasket) 2003-Up (Without Side Cover Gasket)… | — |
| 006 not on diagram | Part # 84006HW | Master W/Steels Kit, 4T65E (Volvo) (With Bonded Bottom Pan Gasket) 1999-02 (Without Side Cover Gasket)… | — |
| 011 not on diagram | Part # 84011 | Filter Kit, 440-T4 1983-92 | — |
| 011 not on diagram | Part # 84011E | Filter Kit, 4T60E 1991-Up | — |
| 011 not on diagram | Part # 84011EW | Filter Kit, 4T60E/4T65E (Bonded Pan Gasket) L1994-Up | — |
| 016 not on diagram | Part # 84016EK | Screen Kit, 4T60E Force Motor Solenoid (4 Piece Kit) 1991-Up | — |
| 030 not on diagram | Part # 84030 | Bushing Kit, 440-T4 1983-91 | — |
| 030 not on diagram | Part # 84030E | Bushing Kit, 4T60E 1991-95 | — |
| 030 not on diagram | Part # 84030EA | Bushing Kit, 4T60E/4T65E (13 Pieces) 1991-Up | — |
| 100 | Part # 84100AAPK | Friction & Steel Kit, 440-T4 4th Clutch .090” (Bent Tooth) 1983-88 (1 Friction & 2 Thin Steels) (Alto) | — |
| 100 | Part # 84100BPK | Friction & Steel Kit, 440-T4/4T60E 4th Clutch .070” (Bent Tooth) 1989-Up (2 Frictions & 2 Thin Steels) (Alto) | — |
| 100 | Part # 84100CPK | Friction & Steel Kit, 4T60E 4th Clutch .070” (Bent Tooth) 1993-Up (2 Frictions, 1 Thin Steel, & 2 Thick Steels) (Alto) | — |
| 104 | Part # 84104CPK | Friction & Steel Kit, 440-T4/4T60E 2nd Clutch .060” (Commercial) 1983-Up (7 Frictions, 6 Thin Steels, & 1 Thick Steel) | — |
| 104 | Part # 84104PK | Friction & Steel Kit, 440-T4/4T60E 2nd Clutch (.070” Fri, .090” Kolene Steels) 1983-Up | 1 |
| 160 | Part # 84160K | Modulator Kit, 440-T4/4T60E (Contains Large Can Modulator) 1983-Up | 1 |
| 161 not on diagram | Part # T84161 | Adapter Kit, 440-T4 (Makes All 350/400 Modulator fit a 440-T4) 1983-Up (Teckpak) | 1 |
| 165 not on diagram | Part # T84165LE | Lube Kit, 440-T4 Lube & End Play Kit 1983-Up (Transgo) | — |
| 175 not on diagram | Part # 84175 | Ring Kit, 440-T4 W/Out Vespel Rings 1983-Up | — |
| 175 not on diagram | Part # 84175A | Ring Kit, 440-T4/4T60E/4T65E W/Vespel Rings 1983-E98 | — |
| 175 not on diagram | Part # 84175G | Ring Kit, 4T65E L1998-Up | — |
| 179 | Part # 84179KT | Ring Kit, 440-T4/4T60E/4T65E 2nd Clutch (Contains; 2 84179ET & 2 84179T) 1987-E98 | — |
| 200 not on diagram | Part # 84200 | Washer Kit, 440-T4/4T60E (6 Washers, No Selectives) 1983-Up | — |
| 200 not on diagram | Part # 84200G | Washer Kit, 4T65E (5 Washers, No Selectives) 1997-00 | — |
| 200 not on diagram | Part # 84200GA | Washer Kit, 4T65E (6 Washers, No Selectives) 2001-Up | — |
| 201 not on diagram | Part # 84201A | Bearing Kit, 440-T4/4T60E 1983-Up (Contains: #217, 229, 232A, 238, 247, 251, 254, 257, 265A, & 292)… | — |
| 201 not on diagram | Part # 84201G | Bearing Kit, 4T65E 1997-Up | — |
| 204 not on diagram | Part # 64204D | Repair Kit, 125C Final Drive Planet (8 Brass & 8 Steel Washers)(Large) 1982-Up | 1 |
| 204 not on diagram | Part # 84204A | Repair Kit, 440-T4/4T60E/4T65E Final Drive Planet (16 Steel Washers) 1983-Up | 1 |
| 229 | Part # S84229SAK | Shim Kit, 440-T4/4T60E Input .020” (10 Per Kit) 1983-Up (Sonnax) | 1 |
| 229 | Part # S84229SK | Shim Kit, 440-T4/4T60E Input .010” (10 Per Kit) 1983-Up (Sonnax) | 1 |
| 293 | Part # S64293-10 | Shim Set, 125 / 125C Differential To Case (10 Per Set) (Sonnax) | 1 |
| 420 not on diagram | Part # T84420K | Solenoid Master Kit, 4T60E (Contains; 3 Shift, 1 TCC, & 1 PWM Solenoid)(Teckpak) | 1 |
| 441 | Part # 84441 | Element Plate Kit, 440-T4 Thermostatic Element | 1 |
| 445 not on diagram | Part # 64445K | Repair Kit, 125C External Wire Harness (Square 4 Prong)(Plugs Into Connector) 1989-Up | — |
| 445 not on diagram | Part # 74445E-2K | Repair Kit, 400/4L80E (Repairs The 2 Pin VSS Harness Only) (1”OD) | — |
| 445 not on diagram | Part # 84445EBK | Repair Kit, 4T60E External Wire Harness 1994-Up | 1 |
| 445 not on diagram | Part # 84445EK | Repair Kit, 4T60E External Wire Harness 1991-93 | 1 |
| 445 not on diagram | Part # 84445K | Repair Kit, 125C External Wire Harness (Square 5 Prong)(Plugs Into Connector) 1983-Up | — |
| 560 not on diagram | Part # 84560 | Piston Kit, 440-T4 4th Clutch (1st Design) 1983-85 | — |
| 560 not on diagram | Part # 84560A | Piston Kit, 440-T4/4T60E 4th Clutch (2st Design) 1986-Up | — |
| 560 not on diagram | Part # 84560G | Piston Kit, 4T65E 4th Clutch 1997-Up | — |
| 562 not on diagram | Part # 84562 | Piston Kit, 440-T4 2nd Clutch L1985-91 | — |
| 562 not on diagram | Part # 84562A | Piston Kit, 4T60E 2nd Clutch (Bonded)(5 1/8”OD Piston) 1991-Up | — |
| 562 not on diagram | Part # 84562G | Piston Kit, 4T65E 2nd Clutch (Bonded)(5 3/8”OD Piston) 1997-Up | — |
| 564 not on diagram | Part # 84564B | Piston Kit, 440-T4 3rd & Input Clutch (Lip Seal Type) 1983-91 | — |
| 564 not on diagram | Part # 84564CA | Piston Kit, 4T60E 3rd & Input Clutch (W/Bonded 3rd Clu Piston W/Check Ball) 1991-Up | — |
| 564 not on diagram | Part # 84564G | Piston Kit, 4T65E 3rd & Input Clutch (W/Bonded 3rd Clu Piston No Check Ball) 1997-Up | — |
| 582 | Part # 84582AK | Planet Kit, 440-T4 Front W/Input Sprag (.265” Wide Bushing)(No Bevel) 1986-91 | — |
| 652 | Part # S84652A-1K | Spring Set, 4T60E 1-2 Roller Sprag (Heavy Duty)(16 Per Set)(Sonnax) | 1 |
| 705 | Part # 84705GAK | Sprocket Chain Set, 4T65E(33 Tooth Drive, 37 Tooth Driven Sprockets) 2001-Up | 1 |
| 705 | Part # 84705GBK | Sprocket Chain Set, 4T65E(37 Tooth Drive, 33 Tooth Driven Sprockets) 1997-Up | 1 |
| 705 | Part # 84705HK | Sprocket Chain Set, 4T65E (35 Teeth Drive / 35Teeth Driven Sprockets) 1997-00 | — |
| 705 | Part # 84705JAK | Sprocket Chain Set, 4T65E (37 Teeth Drive / 33 Teeth Driven Sprockets) 2001-Up… | — |
| 741 not on diagram | Part # 84741C-3K | Spring Kit, 440-T4 TCC 1983-Up | — |
| 741 not on diagram | Part # S84741APK | Valve Kit, 440-T4/4T60E/4T65E Pressure Regulator (Oversized)(Sonnax)(Must Use T-84754-TL46) | — |
| 741 not on diagram | Part # S84741BCK | Sure Cure Kit, 4T60E 1993-96 (Sonnax) | — |
| 741 not on diagram | Part # S84741BDK | Sure Cure Kit, 4T60E 1997-Up (Sonnax) | — |
| 741 not on diagram | Part # S84741BK | TCC Regulator Valve Kit, 4T60E (PWM)(Uses T-84754-RM Reamer)(Sonnax) 1991-93 | 1 |
| 741 not on diagram | Part # S84741CK | TCC Regulator Valve Kit, 4T60E (Sonnax) 1993-Up | 1 |
| 741 not on diagram | Part # S84741D-4K | Retainer Set, 4T60/4T60E/4T65E Forward & Reverse Servo Boost Valve Retainer Roll Pins (10 Per Set) (Sonnax) | — |
| 741 not on diagram | Part # S84741EC-GAK | Valve & Spring Kit, 4T65E 3-4 Accumulator (Oversized)(Volvo)(Sonnax)(Must Use T-F-84754-TL55 and T-VB-FIX) | — |
| 741 not on diagram | Part # S84741EC-GK | Valve & Spring Kit, 4T65E 3-4 Accumulator (Oversized)(GM)(Sonnax)(Must Use T-F-84754-TL55 & T-VB-FIX) | — |
| 741 not on diagram | Part # S84741GC-1SK | Service Kit, 4T65E (For S84741GC-1)(5 Teflon Rings)(Sonnax) | — |
| 741 not on diagram | Part # S84741GCK | TCC Regulator Apply Valve Kit, 4T65E (Valve, Sleeve, & Spring)(Sonnax) 1997-Up (Must Use T-84754-TL3) | 1 |
| 741 not on diagram | Part # S84741GDK | Sure Cure Kit, 4T65E 1997-Up (Sonnax) Requires Tools # T-84754-TL3, T-VB-Fix & T-F-84596-TL | — |
| 741 not on diagram | Part # S84741GPK | Boost Valve Kit, 4T65E (Valve & Sleeve) 1997-Up (Sonnax) | 1 |
| 741 not on diagram | Part # S84741HC-4K | Retaining Clip Set, 440-T4/4T60E 4-3 Downshift Valve (10 Per Set) (Sonnax) | — |
| 741 not on diagram | Part # S84741MAK | Modulated & Reverse Boost Kit, 440-T4/4T60E (High Ratio)(Sonnax) 1983-Up | 1 |
| 741 not on diagram | Part # S84741MK | Modulated & Reverse Boost Kit, 440-T4/4T60E (Low Ratio)(Sonnax) 1983-Up | 1 |
| 741 not on diagram | Part # S84741R-4K | E-Clip Set, 440-T4/4T60E Reverse Boost Valve (Sonnax) (10 Per Set) | — |
| 741 not on diagram | Part # S84741T-4K | Retaining Clip Set, 440-T4/4T60E/4T65E Forward & Reverse Servo Boost Valve Retainer Roll Pins (10 Per Set) (Sonnax) | — |
| 755 | Part # S84755-1FK | Actuator Feed Limit Valve Kit, 4T65E (In Case Cover)(Valve Sleeve & 2 Springs)(Sonnax) (Use T-F-84596-TL) | — |
| 777 not on diagram | Part # 84777GK | Bolt Set, 4T65E Pump to Valve Body 1997-Up (11 Per Set) | — |
| 777 not on diagram | Part # 84777K | Bolt Set, 440-T4 Pump to Valve Body 1983-91 | — |
| 778 not on diagram | Part # 84778K | Bolt Set, 440-T4/4T60E Converter Reactor to Case 1983-Up (4 Per Set) | — |
| 779 not on diagram | Part # 84779EK | Bolt Set, 4T60E Bottom Pan to Case (8mm Thread OD) 1991-Up (20 Pieces) | — |
| 779 not on diagram | Part # 84779GK | Bolt Set, 4T65E Bottom Pan to Case (6mm Thread OD) 1997-Up (20 Pieces) | — |
| 779 not on diagram | Part # 84779K | Bolt Set, 440-T4 Bottom Pan to Case 1983-91 (19 Per Set) | — |
| 781 | Part # 84781K | Bolt Set, 4T60E/4T65E Extension Housing to Case 1991-Up (4 Per Set) | — |
| 782 not on diagram | Part # 84782GK | Bolt Set, 4T65E Valve Body to Channel Plate 1997-Up (15 Per Set) | — |
| 784 not on diagram | Part # 84784AK | Bolt Set, 4T60E/4T65E 2-1 Servo 1992-Up (3 Per Set) | — |
| 788 | Part # 84788AK | Bolt Set, 4T60E Side Pan To Channel Plate 1992-Up | — |
| 788 | Part # 84788K | Bolt Set. 440-T4 Side Pan to Channel Plate 1983-91 (17 Per Set) | — |
| 788 | Part # 84788NK | Nut Set. 440-T4 Side Pan to Channel Plate 1983-91 (6 Per Set) | — |
| 791 not on diagram | Part # 84791K | Bolt Set. 440-T4 Oil Scoop to Case 1983-91 | — |
| 792 not on diagram | Part # 84792K | Bolt Set. 440-T4 Accumulator Cover to Case 1983-91 | — |
| 907 | Part # S84907K | Piston Kit, 440-T4/4T60E 1-2 Servo (Contains; Piston, Sleeve, Spacer, & Seal) (No Machining Required) (Sonnax) | — |
| 927 | Part # 84927AK | Piston Kit, 4T60E 1-2 & 2-3 Accumulator (2 Pistons, Spring & Spacer)(.308”OD Pin) 1991-Up (Transgo) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 64529A | Converter Reactor, 125C 1982-Up | 1 |
| 529 | Part # 84529G | Converter Reactor, 4T65E 1997-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 160 | Part # 84160 | Modulator, 440-T4 Non-Adjustable (Single) 1983-Up | 1 |
| 160 | Part # 84160B | Modulator, 440-T4/4T60E Black/Red Stripe (Single)(Diesel) 1983-Up | 1 |
| 160 | Part # 84160G | Modulator, 440-T4 Green Stripe (Single) 1983-Up | — |
| 160 | Part # 84160R | Modulator, 250/250C/350/350C Universal Dual Red Stripe 1969-86 | 2 |
| 163 | Part # 84163 | Valve, 440-T4 Under Modulator (Long, 1st Design) 1983-E86 | 1 |
| 163 | Part # 84163A | Valve, 440-T4 Under Modulator (Long, 1st Design) L1986-Up | 1 |
| 165 not on diagram | Part # S84165 | Valve Body Kit, 440-T4 1983-Up (Superior) | 1 |
| 165 not on diagram | Part # S84165G | Valve Body Kit, 4T65E Shift Correction 1997-Up (Superior) | — |
| 165 not on diagram | Part # T84165-3 | Valve Body Kit, 440-T4 Tri-Pack 1983-Up (Transgo) | 1 |
| 165 not on diagram | Part # T84165A | Valve Body Kit, 440-T4 (Reverse Cushion Kit) 1983-Up (Transgo) | — |
| 165 not on diagram | Part # T84165G | Valve Body Kit, 4T65E 1997-Up (Transgo) | — |
| 167 not on diagram | Part # T84167 | Valve Body Kit, 440-T4 Junior 1983-Up (Transgo) | 1 |
| 167 not on diagram | Part # T84167E | Valve Body Kit, 4T60E Junior 1991-Up (Transgo) | 1 |
| 418 | Part # 84418A | Solenoid, 4T60E TCC, PWM 1991-Up | 1 |
| 418 | Part # T84418 | Solenoid, 4T60E TCC, PWM 1991-Up (Teckpak) | 1 |
| 421 | Part # 84421 | Solenoid, 4T60E 1-2, 3-4, & TCC 1991-Up | 1 |
| 421 | Part # 84421A | Solenoid, 4T65E 1-2 & 3-4 Shift 1997-Up | — |
| 425 | Part # 84425 | Solenoid, 125C TCC (Universal) 1982-Up (Rostra) | 2 |
| 425 | Part # 84425GA | Solenoid, 4T65E TCC 1997-Up | — |
| 425 | Part # T84425K | Solenoid, 125C TCC (6 Pack With Free Posi-Twist Travel Pack) 1982-Up (Teckpak) | 1 |
| 431 not on diagram | Part # 84431G | Solenoid, 4T40E Pressure Control (EPC) 1995-02 | 1 |
| 431 not on diagram | Part # 84431GA | Solenoid, 4T40E Pressure Control (EPC) 2003-11 | 1 |
| 480 not on diagram | Part # 84480D | Capsule W/Check Ball, 440-T4 Input Drum 1983-86 | 1 |
| 480 not on diagram | Part # 84480DA | Capsule W/Check Ball, 440-T4/4T60E Input Drum 1987-Up | 1 |
| 680 | Part # 84680 | Governor, 440-T4 (W/Out Plastic Speed-O Gear) 1983-Up | 1 |
| 680 | Part # 84680A | Governor, 440-T4 (W/8 Tooth Electronic Pick-Up) 1983-Up | 1 |
| 680 | Part # 84680B | Governor, 440-T4 (W/11 Tooth Electronic Pick-Up) 1983-Up | 1 |
| 680 | Part # 84680C | Governor, 440-T4 (W/14 Tooth Electronic Pick-Up) 1983-Up | 1 |
| 680 | Part # 84680D | Governor, 440-T4 (W/15 Tooth Electronic Pick-Up) 1983-Up | 1 |
| 740 | Part # 84740 | Valve Body, 440-T4 (W/Small Check Balls Only) 1983-E85 | — |
| 740 | Part # 84740A | Valve Body, 440-T4 (W/Large & Small Check Balls) L1985-92 | — |
| 740 | Part # 84740AA | Valve Body, 4T60E (3 Solenoids) 1991-E93 (Cast #284 On Channel Plate)… | 1 |
| 740 | Part # 84740B | Valve Body, 4T60E (3 Solenoid) L1993-E94 (Cast #217 On Channel Plate)… | 1 |
| 740 | Part # 84740BA | Valve Body, 4T60E (4 Solenoid L1994-Up )… | — |
| 740 | Part # 84740BAA | Valve Body, 4T60E (4 Solenoids) 1991-E93 (Cast #284 On Channel Plate)… | 1 |
| 740 | Part # 84740BB | Valve Body, 4T60E (4 Solenoid)L1993-E94 (Cast #217 On Channel Plate)… | 1 |
| 740 | Part # 84740BC | Valve Body, 4T60E (4 Solenoid) L1994-Up… | — |
| 740 | Part # 84740BD | Valve Body, 4T60E (4 Solenoid) 1991-E93 (Cast #284 On Channel Plate)… | 1 |
| 740 | Part # 84740C | Valve Body, 4T60E (4 Solenoid) L1993-E94 (Cast #217 On Channel Plate)… | 1 |
| 740 | Part # 84740CA | Valve Body, 4T60E (4 Solenoid) L1993-E94 (Cast #217 On Channel Plate)… | 1 |
| 740 | Part # 84740CB | Valve Body, 4T60E (4 Solenoid) 1991-E93 (Cast #284 On Channel Plate)… | 2 |
| 740 | Part # 84740D | Valve Body, 4T60E (4 Solenoid) L1994-Up (The Primary 1-2 Accumulator Plug is Steel & is Recessed in From The Valve… | — |
| 740 | Part # 84740GA | Valve Body, 4T65E (GM)(4 Solenoids, 2 Square & 2 Round) 1997-02 (Tested)… | — |
| 740 | Part # 84740GB | Valve Body, 4T65E (GM)(4 Solenoids, 2 Square & 2 Round) 2002-03 (Tested)… | — |
| 740 | Part # 84740GC | Valve Body, 4T65E (GM)(4 Solenoids, 2 Square & 2 Round) 2002-Up (Tested)… | — |
| 740 | Part # 84740GD | Valve Body, 4T65E (Volvo)(4 Solenoids, 2 Square & 2 Round) 1997-02 (The EPC Solenoid Is 1.320”OD)… | — |
| 740 | Part # 84740GE | Valve Body, 4T65E (Volvo)(4 Solenoids, 2 Square & 2 Round) 2003-Up (The EPC Solenoid Is 862”OD)… | — |
| 740 | Part # 84740H | Valve Body, 4T65E (Volvo With Geartronic Feature) 1999-02 | — |
| 741 not on diagram | Part # 84741G-5B | Check Ball, 440-T4/4T60E Valve Body (.375”) (Torlon) | — |
| 741 not on diagram | Part # 84741H-1 | Valve, 440-T4 3-2 Down Shift (in Valve Body) 1983-Up | 1 |
| 741 not on diagram | Part # 84741N-4 | Throttle Valve Plunger, 440-T4 .357” (Steel) 1983-Up | — |
| 741 not on diagram | Part # 84741NA-4 | Throttle Valve Plunger, 440-T4 .396” (Steel) 1983-Up | — |
| 741 not on diagram | Part # S84741C-1 | TCC Apply Valve, 440-T4/4T60E (Sonnax) 1983-96 | 1 |
| 741 not on diagram | Part # S84741CA-1 | TCC Apply Valve, 440-T4/4T60E (Oversized, Uses T-84754-TL Reamer)(Sonnax) 1983-96 | 1 |
| 741 not on diagram | Part # S84741CCK | TCC Apply Valve, 4T60E (Sonnax) 1997-Up | 1 |
| 741 not on diagram | Part # S84741CDK | TCC Apply Valve, 4T60E (Oversized, Uses T-84754-TL, & T-84754-DJ2)(Sonnax) 1997-Up | 1 |
| 741 not on diagram | Part # S84741CGK | TCC Apply Valve, 4T65E (Oversized, With O-Ring For TCC Regulated Apply Valve End Plug) (Sonnax) 1997-Up… | — |
| 741 not on diagram | Part # S84741E-1G | Valve, 4T65E 1-2 Accumulator (Oversized)(Sonnax)(Must Use T-F-84754-TL57 & T-VB-Fix) | — |
| 741 not on diagram | Part # S84741EB-GK | Valve & Sleeve Kit, 4T65E 2-3 Accumulator (Sonnax) | — |
| 741 not on diagram | Part # S84741F-1X | Valve, 4T65E Torque Signal (Oversize) (Sonnax) (Use With Reamer T-84754-TL44) | — |
| 741 not on diagram | Part # S84741GC-1 | Valve, 4T65E TCC Apply (With Teflon Rings) 1997-Up (Sonnax) | — |
| 741 not on diagram | Part # S84741HA-1 | Valve, 4T60E 3-2 Manual Downshift (Sonnax) | — |
| 741 not on diagram | Part # S84741HC-1 | Valve, 4T60E 4-3 Manual Downshift (Sonnax) | — |
| 741 not on diagram | Part # S84741M-1 | Modulated Boost Valve, 440-T4/4T60E (W/Sleeve & Spring)(Low Ratio)(Sonnax) 1983-Up | 1 |
| 741 not on diagram | Part # S84741MA-1 | Modulated Boost Valve, 440-T4/4T60E (W/Sleeve & Spring)(High Ratio)(Sonnax) 1983-Up | 1 |
| 741 not on diagram | Part # S84741RAK-1 | Reverse Boost Valve, 440-T4/4T60E (W/Sleeve & Spring)(High Ratio)(Sonnax) 1983-Up | 1 |
| 741 not on diagram | Part # S84741RK-1 | Reverse Boost Valve, 440-T4/4T60E (W/Sleeve & Spring)(Low Ratio)(Sonnax) 1983-Up | 1 |
| 741 not on diagram | Part # S84741SA-1 | Valve, 440-T4/4T60E 1-2 Shift (Sonnax) 1983-Up | 1 |
| 741 not on diagram | Part # S84741SB-1 | Valve, 4T60E 2-3 Shift (Anodized) 1994-97 (Sonnax) | — |
| 741 not on diagram | Part # S84741SC-1 | Valve, 4T60E 3-4 Shift (Anodized) 1994-97 (Sonnax) | — |
| 747 | Part # 84747A | Plate, 440-T4 Valve Body 1983-E85 | 1 |
| 747 | Part # 84747B | Plate, 440-T4 Valve Body (W/2 Piece Type TCC Regulator Valve) L1985-91 | 1 |
| 747 | Part # 84747C | Plate, 440-T4 Valve Body (W/1 Piece Type TCC Regulator Valve) L1985-90 | 1 |
| 747 | Part # 84747G | Plate, 4T65E Valve Body (With Bonded Gaskets) 1997-03 | 1 |
| 747 | Part # 84747GA | Plate, 4T65E Valve Body (With Bonded Gaskets) 2004-08 (Will Not Work On Paddle Shift Units)… | — |
| 755 | Part # 84755 | Channel Plate, 440-T4 (Cast # 027) 1983-E85 | 1 |
| 755 | Part # 84755BA | Channel Plate, 440-T4 (Cast # 827)(No Switch) L1985-87 (Can Use 84755CA) | 1 |
| 755 | Part # 84755BB | Channel Plate, 440-T4 (Cast # 827)(W/1 Switch) L1985-87 | 1 |
| 755 | Part # 84755CA | Channel Plate, 440-T4 (Cast # 423)(No Switch) 1988-91 (Can Use 84755BA) | 2 |
| 755 | Part # 84755CB | Channel Plate, 440-T4 (Cast # 423)(W/1 Switch) L1988-91 | 1 |
| 755 | Part # 84755DA | Channel Plate, 440-T4 (Cast # 971)(No Switch) 1988-91 | 1 |
| 755 | Part # 84755E | Channel Plate, 440-T4 (Cast # 208)(No Switch) 1988-91 | 1 |
| 755 | Part # 84755EA | Channel Plate, 440-T4 (Cast # 733)(No Switch) 1989 | 1 |
| 755 | Part # 84755GA | Channel Plate, 4T60E (Cast # 284)(No Switch) 1990 | 1 |
| 755 | Part # 84755H | Channel Plate, 4T60E 1991-92 | — |
| 755 | Part # 84755HA | Channel Plate, 4T60E (Cast # 217)(No Switch) 1993-94 (Does Not Use A TCC Piston) | 1 |
| 755 | Part # 84755HAK | Channel Plate Assembly, 4T60E (Cast # 217) (Contains; # 84740 & 84500) 1993-94 | 1 |
| 755 | Part # 84755HB | Channel Plate, 4T60E (Cast # 217) (No Switch) 1993-94 (Uses A TCC Piston) | 1 |
| 755 | Part # 84755HC | Channel Plate, 4T60E (Cast # 353) 1993-94 | 1 |
| 755 | Part # 84755J | Channel Plate, 4T60E (Cast # 594)(No Switch) | 1 |
| 755 | Part # 84755JA | Channel Plate, 4T60E (Cast # 656)(W/Pan Bolt Studs) 1994 | 1 |
| 755 | Part # 84755JB | Channel Plate, 4T60E (Cast # 657)(No Pan Bolt Studs)(No TCC Piston) | 1 |
| 755 | Part # 84755JC | Channel Plate, 4T60E (Cast # 657)(No Pan Bolt Studs)(W/TCC Piston) | 1 |
| 755 | Part # 84755JD | Channel Plate, 4T60E (Cast # 656)(No Pan Bolt Studs)(W/TCC Piston) | 1 |
| 755 | Part # 84755JE | Channel Plate, 4T60E (Cast # 656)(No Pan Bolt Studs)(No TCC Piston) | 1 |
| 755 | Part # 84755L | Channel Plate, 4T60E (Cast # 760) | 1 |
| 755 | Part # 84755N | Channel Plate, 4T65E (Cast # 038) 1997-Up (Must Use Their Manual Valve) | 1 |
| 755 | Part # 84755P | Channel Plate, 4T65E (Cast # 496)(W/Axle Stabilizer Bore) 1997-Up (Must Use Their Manual Valve) | 1 |
| 755 | Part # 84755Q | Channel Plate, 4T65E (Cast # 900) (Must Use Their Manual Valve)(Has No Check Ball In The Cooler Line Fitting) 2004-Up… | 1 |
| 755 | Part # 84755QA | Channel Plate, 4T65E (Cast # 900) (Must Use Their Manual Valve)(Has A Check Ball In The Cooler Line Fitting) 1997-Up… | 1 |
| 755 | Part # 84755R | Channel Plate, 4T65E (Cast # 403) 1997-Up (Must Use Their Manual Valve) | 1 |
| 755 | Part # 84755RA | Channel Plate, 4T65E (Cast # 896) 2004-Up (Must Use Their Manual Valve)(Has No Check Ball In The Cooler Line Fitting)… | 1 |
| 755 | Part # 84755RAA | Channel Plate, 4T65E (Cast # 896) 1997-Up (Must Use Their Manual Valve)(Has A Check Ball In The Cooler Line Fitting)… | 1 |
| 755 | Part # 84755RAG | Channel Plate, 4T65E (Cast # 897)(Must Use Their Manual Valve)(Has 2 Check Balls In The Cooler Line Fitting) 1997-Up… | 1 |
| 755 | Part # 84755RB | Channel Plate, 4T65E (Cast # 086) 2004-Up (Must Use Their Manual Valve)(With 1 Blow Off Check Ball)… | 1 |
| 755 | Part # 84755RC | Channel Plate, 4T65E (Cast # 086 or 721) 2004-Up (Must Use Their Manual Valve) (With 2 Blow Off Check Balls)… | 2 |
| 755 | Part # 84755RD | Channel Plate, 4T65E (Cast # 720) 2004-Up (Must Use Their Manual Valve)(With 2 Blow Off Check Balls)… | 1 |
| 755 | Part # 84755VB-1 | Valve, 440-T4 3-2 Line Control Valve 1983-Up | 1 |
| 755 | Part # S84755-1G | Valve, 4T65E Converter Relief (In Channel Plate) (Sonnax) | — |
| 925 not on diagram | Part # 84925 | Accumulator Assembly, 440-T4/4T60E 1-2 & 2-3 (1 Spring Type) 1983-Up | — |
| 925 not on diagram | Part # 84925B | Accumulator Assembly, 4T60E 1-2 (2 Springs on 1 side)(7/8” Thick Piston) 1991-Up | — |
| 925 not on diagram | Part # 84925C | Accumulator Assembly, 4T60E 2-3 (2 Springs on 1 side)( 1” Thick Piston) 1991-Up | — |
| 925 not on diagram | Part # 84925D | Accumulator Assembly, 4T60E 1-2 (1 Spring Each Side)(.308”OD Pin) Some 95-Up | — |
| 925 not on diagram | Part # 84925G | Accumulator Assembly, 4T65E 1-2 (1 Spring Each Side)(.235”OD Pin) 1997-Up | — |
| 930 not on diagram | Part # 84930 | Accumulator Assembly, 440-T4/4T60E 2-3 (Use 84925) 1983-Up | — |
| 930 not on diagram | Part # 84930G | Accumulator Assembly, 4T65E 2-3 (Use 84925) 1997-Up | — |
| 935 not on diagram | Part # 84935 | Accumulator Assembly, 440-T4 Input (W/Steel Piston) 1983-Up | — |
| 935 not on diagram | Part # 84935E | Accumulator Assembly, 4T60E 3-4 (W/2” Tall Cover) 1991-Up | — |
| 935 not on diagram | Part # 84935G | Accumulator Assembly, 4T65E 3-4 (W/1 3/4”” Tall Cover) 1997-Up | — |
| 940 not on diagram | Part # 84940A | Accumulator Assembly, 440-T4/4T60E TCC 1983-Up | 1 |
| 945 not on diagram | Part # 84945 | Accumulator Assembly, 440-T4 Input (W/Steel Piston) 1983-91 | — |
| 991 | Part # 84991-3K | Rooster Comb Kit, 440-T4 Internal (W/Link & Spring) 1983-91 | 1 |
| 991 | Part # 84991B-3K | Rooster Comb Kit, 4T60E/4T65E Internal (W/Link & Spring) 1991-E98 | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 84410B | Switch, 4T60E Neutral Safety (W/Wire Harness, W/1 Four, & 1 Seven Prong Connector) 1991-96 | 1 |
| 410 | Part # 84410BA | Switch, 4T60E Neutral Safety (With Wire Harness) 1991-96 (Cadillac, Seville) | — |
| 410 | Part # 84410E | Switch, 4T60E/4T65E Neutral Safety (No Wire Harness)(With 1 Four & 1 Seven Prong Connector Made On The… | 1 |
| 410 | Part # 84410GA | Switch, 4T65E Neutral Safety (No WIre Harness) 1999-Up (External 6 Prong Connector) (No Longer Available From Dealer)… | — |
| 410 | Part # 84410GAA | Switch, 4T65E Neutral Safety (No Wire Harness) 2003-05 (7 Prong Connector Made On The Switch)(External) | 1 |
| 410 | Part # 84410GB | Switch, 4T65E Neutral Safety (Internal) (With Manual Shaft) (6 Prong) 2000-Up… | — |
| 412 | Part # 84412A | Switch, 440-T4 3rd Clutch Pressure (2 Prong) | 1 |
| 412 | Part # 84412B | Switch, 4T60E 3rd & 4th Clutch Pressure (1 Prong)(Use 74411B) | 1 |
| 413 | Part # 84413 | Switch, 440-T4/4T60E 2nd, 3rd & 4th Clutch Pressure (1 Prong)(1st Design) 1983-Up | — |
| 413 | Part # 84413A | Switch, 440-T4/4T60E 4th Clutch Pressure (1 Prong)(2nd Design) 1983-Up | 1 |
| 436 | Part # 84436A | Sensor, 4T60E Speed-O 1991-Up (Also Fits 4T65E 1997-99) | 1 |
| 436 | Part # 84436G | Sensor, 4T40E Output Speed 2000-Up (With Enclosed Pick-Up) | 1 |
| 436 | Part # 84436H | Sensor, 4T65E (Volvo) (2 Wire With 28 1/2” Long Wire Harness) 1999-Up | — |
| 437 not on diagram | Part # 84437 | Switch, 440-T4 Thermister (2 Prong) | 1 |
| 437 not on diagram | Part # 84437A | Switch, 440-T4 Thermister (1 Prong) | 1 |
| 438 | Part # 84438G | Sensor, 4T65E Input Speed 1997-Up | — |
| 438 | Part # 84438H | Sensor, 4T65E (Volvo) Input Speed 1999-Up | — |
| 442 | Part # 84442G | Switch, 4T65E (TFP) Throttle Valve Position (Manifold Pressure Sensor)(4 Wire) 1997-03 | 1 |
| 442 | Part # 84442GA | Switch, 4T65E (TFP) Throttle Valve Position (Manifold Pressure Sensor)(1 Wire) 2003-Up (Will Retro-Fit Some 1997-Up) | — |
| 444 | Part # 64444A | Connector, 125C Case (Round 5 Wire) 1983-Up | 1 |
| 444 | Part # 84444 | Connector, 125C Case (4 Prong Square) 1989-Up | 1 |
| 444 | Part # 84444C | Connector, 4L30E Case (7 Prong) | 1 |
| 445 not on diagram | Part # 64445 | Wire Harness, 125C External (4 Wire) 1989-Up | 1 |
| 445 not on diagram | Part # 84445 | Wire Harness, 125C External (5 Wire) 1983-Up | 1 |
| 445 not on diagram | Part # 84445GH | Wire Harness Repair, 4L80E External (20 Pin Connector)(GM Universal)(Rostra) | — |
| 446 | Part # 84446B | Wire Harness, 440-T4 Internal (4 Prong Square Case Connector, W/1 Two Prong & 2 One Blade Connectors) | — |
| 446 | Part # 84446BB | Wire Harness, 440-T4 Internal (4 Prong Round Case Connector, W/1 Two Prong & 2 One Blade Connectors) | — |
| 446 | Part # 84446C | Wire Harness, 440-T4 Internal (5 Prong Case Connector, W/1 Two Prong & 3 One Blade Connectors)… | — |
| 446 | Part # 84446CA | Wire Harness, 440-T4 Internal (5 Prong Case Connector, W/1 Two Prong & 3 One Blade Connectors)… | — |
| 446 | Part # 84446D | Wire Harness, 440-T4 Internal (5 Prong Case Connector, W/1 Two Prong & 3 One Prong Connectors) | — |
| 446 | Part # 84446E | Wire Harness, 4T60E Internal (7 Prong Connector, W/2 One Prong Connectors, & 3 Two Prong Connectors) 1991-93 | 1 |
| 446 | Part # 84446EA | Wire Harness, 4T60E Internal (6 Prong Connector) 1991-93 | 1 |
| 446 | Part # 84446EB | Wire Harness, 4T60E Internal (7 Prong Connector, W/4 One Prong Connectors, & 3 Two Prong Connectors) 1991-93 | 1 |
| 446 | Part # 84446EC | Wire Harness, 4T60E Internal (7 Prong Connector, W/4 Two Prong Connectors, & A Clip-on Type Temperature Sensor) 1994-Up | 1 |
| 446 | Part # 84446G | Wire Harness, 4T65E Internal… | — |
| 446 | Part # 84446GB | Wire Harness, 4T65E Internal… | — |
| 446 | Part # 84446GC | Wire Harness, 4T65E Internal (17 Prong Case Connector W/6 Two, 1 One & 1 Six Prong Connector) 2002-Up | — |
| 446 | Part # 84446GD | Wire Harness, 4T65E Internal (17 Prong Case Connector W/6 Two, 1 One & 1 Five Prong Connector) 2002-Up | — |
| 446 | Part # 84446GE | Wire Harness, 4T65E Internal (17 Prong Case Connector, With 5 Two Prong, 1 One Prong & 1 Six Prong Connector) 2003-Up | — |
| 446 | Part # 84446GG | Wire Harness, 4T65E Internal… | 1 |
| 446 | Part # 84446GU | Wire Harness, 4T65E Internal (Universal 14, 17 & 19 Pin Connector) 1997-Up | — |
| 447 not on diagram | Part # 84447E | Shift Rite, #34 (3 Wire Harness) | — |
| 447 not on diagram | Part # 84447F | Shift Rite, #35 (3 Wire Harness) | — |
| 447 not on diagram | Part # 84447G | Shift Rite, #43 (3 Wire Harness) | — |
| 447 not on diagram | Part # 84447H | Shift Rite, #45 (3 Wire Harness) | — |
| 447 not on diagram | Part # 84447I | Shift Rite, #53 (3 Wire Harness) | — |
| 683 | Part # 84683A | Pick-Up, 4T60E/4T65E Speed Sensor (29 Tooth) 1991-Up | — |
| 683 | Part # 84683AA | Pick-Up, 4T60E/4T65E Speed Sensor (30 Tooth) 1991-Up | — |
| 683 | Part # 84683AB | Pick-Up, 4T60E/4T65E Speed Sensor (31 Tooth) 1991-95 | — |
| 845 | Part # 84845G | Reluctor Wheel, 4T65E Input Speed Sensor Pick-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 84010 | Filter, 440-T4 1983-92 | 1 |
| 010 | Part # 84010E | Filter, 4T60E/4T65E 1991-Up | 1 |
| 012 | Part # 84012 | Screen, 440-T4/4T60E/4T65E Oil Pump Pressure 1983-Up | 1 |
| 014 not on diagram | Part # 84014 | Screen, 440-T4 Governor Pressure (Inside # 934) 1983-88 | 1 |
| 014 not on diagram | Part # 84014A | Screen, 440-T4 Governor Pressure 1989-Up | 1 |
| 015 not on diagram | Part # 84015 | Screen, 440-T4 3rd Clutch Exhaust 1983-Up | 1 |
| 015 not on diagram | Part # 84015D | Screen, 440-T4 Orifice 1983-Up | 1 |
| 016 not on diagram | Part # 84016 | Screen, 440-T4/4T60E Solenoid | — |
| 016 not on diagram | Part # 84016E | Screen, 4T60E Shift Solenoid 1991-Up | 1 |
| 016 not on diagram | Part # 84016P | Screen, 440-T4 Solenoid (In Valve Body) E1985 | — |
| 016 not on diagram | Part # 84016PA | Screen, 440-T4/4T60E TCC Solenoid L1985-Up | 1 |
| 017 | Part # 84017A | Screen, 4T60E/4T65E 2-1 Servo (Goes in # 904 Housing) 1991-Up | 1 |
| 765 not on diagram | Part # 84765 | Pan, 440-T4 Bottom 1983-91 | 1 |
| 765 not on diagram | Part # 84765A | Pan, 4T60E Bottom (Uses Bolts With 13mm Heads) 1991-Up | 1 |
| 765 not on diagram | Part # 84765G | Pan, 4T60E/4T65E Bottom (Uses Bolts With 10mm Heads) 1997-Up | — |
| 766 | Part # 84766 | Pan, 440-T4 Side Cover (Tin) 1983-91 | 1 |
| 766 | Part # 84766B | Pan, 4T60E Side Cover (Aluminum, W/4 Threaded Holes) 1991-Up | 1 |
| 766 | Part # 84766BA | Pan, 4T60E Side Cover (Aluminum, W/6 Threaded Holes) 1991-Up | — |
| 766 | Part # 84766C | Pan, 4T65E Side Cover (Aluminum, W/6 Threaded Holes) (Cast # 24211956 or 24203988) 1997-Up | 2 |
| 766 | Part # 84766CA | Pan, 4T65E Side Cover (Aluminum) (Volvo Style) (Cast # 24211926) 1997-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 84070 | Seal, 125/125C Front (Converter Hub) 1980-Up | 1 |
| 070 | Part # 84070G | Seal, 4T65E (Front) Yellow Bore Coat 1997-Up | — |
| 072 | Part # 84072A | Seal, 125C Manual Lever 1984-Up | 1 |
| 075 not on diagram | Part # T84075 | Seal, 125/125C Axle Stabilizer (Teckpak) 1980-Up | 1 |
| 076 | Part # 84076 | Seal, 125/125C Axle (Both Sides)(2.155”OD) 1980-Up | 2 |
| 076 | Part # 84076GV | Seal, 4T65E (Volvo) Axle (Right Side) (2.900”OD) 1999-Up | — |
| 077 | Part # 84077 | Seal, 440-T4/4T60E Axle (Left Side) 1983-Up | 1 |
| 077 | Part # 84077G | Seal, 4T65E Axle (Left Side) 1997-Up | 1 |
| 078 | Part # 44078A | Seal, 250/250C/350/350C Speed-O Shaft (Rubber, W/Spring) 1969-86 | 2 |
| 078 | Part # 44078X | Seal, 125/125C Speed-O Shaft 1980-Up | 1 |
| 176 | Part # 84176 | Ring, 440-T4/4T60E/4T65E Pump Slide .080” (Metal) 1983-Up | 1 |
| 176 | Part # 84176A | Ring, 440-T4/4T60E/4T65E Pump Slide .077” (Metal) 1983-Up | — |
| 176 | Part # 84176B | Ring, 440-T4/4T60E/4T65E Pump Slide .074” (Metal) 1983-Up | — |
| 176 | Part # 84176C | Ring, 440-T4/4T60E/4T65E Pump Slide .072” (Metal) 1983-Up | — |
| 176 | Part # 84176D | Ring, 440-T4/4T60E/4T65E Pump Slide .069” (Metal) 1983-Up | — |
| 177 | Part # 84177T | Ring, 440-T4/4T60E/4T65E Input Shaft (Teflon) 1983-Up | 1 |
| 178 not on diagram | Part # 64178AT | Ring, 125C Turbine Shaft (Front)(Solid)(Teflon) 1982-Up | 1 |
| 178 not on diagram | Part # 64178BT | Ring, 125/125C Turbine Shaft (Rear)(Solid)(Teflon) 1980-Up | 1 |
| 179 | Part # 84179 | Ring, 440-T4 2nd Clutch (Metal) 1983-86 | 1 |
| 179 | Part # 84179ET | Ring, 440-T4/4T60E/4T65E 2nd Clutch (Rubber Expander) 1987-E98 | 1 |
| 179 | Part # 84179GT | Ring, 4T65E 2nd Clutch .100” (Vespel)(Teflon)(Does Not Use Rubber Expanders)L98-Up | 1 |
| 179 | Part # 84179T | Ring, 440-T4/4T60E/4T65E 2nd Clutch .125” (Vespel)(Teflon) 1987-E98 | 1 |
| 189 | Part # 54189AT | Ring, 440-T4/4T60E Governor Shaft (Teflon) 1983-Up | 1 |
| 192 | Part # 84192T | Ring, 440-T4/4T60E Input Clutch Accumulator (Teflon) 1983-Up | 1 |
| 195 not on diagram | Part # 84195T | Ring, 440-T4/4T60E 1-2 Reverse Servo (Teflon) 1983-Up (For Rubber Use 84363A) | 1 |
| 300 not on diagram | Part # 84300 | Gasket, 440-T4 Bottom Pan 1983-Up | 1 |
| 300 not on diagram | Part # 84300E | Gasket, 4T60E Bottom Pan 1991-Up | 1 |
| 300 not on diagram | Part # 84300EAW | Gasket, 4T60E/4T65E Bottom Pan (Bonded) (For Bolts With 10mm Heads) 1997-Up | — |
| 300 not on diagram | Part # 84300EW | Gasket, 4T60E/4T65E Bottom Pan (Bonded) (For Bolts With 13mm Heads) 1991-Up | — |
| 301 | Part # 84301 | Gasket, 440-T4/4T60E Side Pan (Outer) 1983-93 | 1 |
| 301 | Part # 84301EW | Gasket, 4T60E Side Pan (Outer)(Bonded) 1994-Up | 1 |
| 301 | Part # 84301GW | Gasket, 4T65E Side Pan (Outer)(Bonded) 1997-Up | 1 |
| 301 | Part # 84301J | Gasket, 440-T4/4T60E Side Pan (Inner) 1983-93 | 1 |
| 301 | Part # 84301JA | Lathe Cut Seal, 4T60E Side Pan (Inner) 1994-Up | 1 |
| 301 | Part # 84301JG | Lathe Cut Seal, 4T65E Side Pan (Inner) (4 11/16”OD) 1997-Up | — |
| 306 | Part # 84306 | Gasket, 440-T4 Governor Control Body 1983-Up | 1 |
| 308 | Part # 84308 | Gasket, 440-T4 Accumulator Cover 1983-Up | 1 |
| 308 | Part # 84308A | Gasket, 4T60E Accumulator Cover 1991-93 | 1 |
| 308 | Part # 84308B | Gasket, 4T60E Accumulator Cover W/Spacer Plate 1991-Up | 1 |
| 308 | Part # 84308G | Gasket, 4T65E Accumulator Cover W/Spacer Plate 1997-Up | — |
| 313 | Part # 84313 | O-Ring, 440-T4/4T60E/4T65E Pump Slide 1983-Up | 1 |
| 314 not on diagram | Part # 54314B | Seal, 125/125C Pump Slide (Rubber) 1980-Up | 1 |
| 315 not on diagram | Part # 54315B | Seal, 125/125C Pump Slide (Teflon) 1980-Up | 2 |
| 320 | Part # 84320 | Gasket, 440-T4 Valve Body (Both Sides) 1983-84 | 1 |
| 320 | Part # 84320A | Gasket, 440-T4 Valve Body Spacer Plate to Channel Plate E1985 (Ink # 713)(GCP) | 1 |
| 320 | Part # 84320AA | Gasket, 440-T4 Valve Body Spacer Plate to Channel Plate L1985-93 (Ink # 813)(GCA) | 1 |
| 320 | Part # 84320B | Gasket, 4T60E Valve Body Spacer Plate to Channel Plate 1991-92 (Ink # 8678761)(GCP) | 1 |
| 320 | Part # 84320BA | Gasket, 4T60E Valve Body Spacer Plate to Channel Plate 1993-Up (Ink # 8682220) | 1 |
| 320 | Part # 84320G | Gasket, 4T65E Valve Body Spacer Plate to Channel Plate 1997-Up (C CVT AVT) | — |
| 320 | Part # 84320GV | Gasket, 4T65E (Volvo) Valve Body Plate To Channel Plate 1999-Up (C CVT AVT) | — |
| 320 | Part # 84320L | Gasket, 440-T4 Valve Body Spacer Plate to Channel Plate (Allante) 1989-92 (Ink # 401) | — |
| 321 | Part # 84321 | Gasket, 440-T4 Valve Body to Spacer Plate 1983-84 (Use 84320) | — |
| 321 | Part # 84321A | Gasket, 440-T4 Valve Body to Spacer Plate E1985 (Ink # 712) (GVB) | 1 |
| 321 | Part # 84321AA | Gasket, 440-T4 Valve Body to Spacer Plate L1985-93 (Ink # 848) | 1 |
| 321 | Part # 84321B | Gasket, 4T60E Valve Body to Spacer Plate 1991-92 (Ink # 8678762) | 1 |
| 321 | Part # 84321BA | Gasket, 4T60E Valve Body to Spacer Plate 1993-99 (Ink # 8683281) | 1 |
| 321 | Part # 84321G | Gasket, 4T65E Valve Body to Spacer Plate 1997-Up | — |
| 321 | Part # 84321GV | Gasket, 4T65E (Volvo) Valve Body To Spacer Plate 1999-Up | — |
| 321 | Part # 84321L | Gasket, 440-T4 Valve Body to Spacer Plate (Allante) 1989-Up | — |
| 322 | Part # 84322 | Gasket, 440-T4 Manuever Pipe to Valve Body (1st Design) 1983-E85 | 1 |
| 322 | Part # 84322A | Gasket, 440-T4 Manuever Pipe to Valve Body (2nd Design) L1985-Up | 1 |
| 325 | Part # 84325 | Gasket, 440-T4 Upper Channel Plate 1983-93 | 1 |
| 325 | Part # 84325A | Gasket, 4T60E Upper Channel Plate 1991-Up | 1 |
| 325 | Part # 84325AG | Gasket, 4T65E Upper Channel Plate 1997-Up | — |
| 325 | Part # 84325AGW | Gasket, 4T65E Upper Channel Plate (Rubber Coated Metal) 1997-Up | — |
| 325 | Part # 84325B | Gasket, 440-T4 Lower Channel Plate 1983-E85 | 1 |
| 325 | Part # 84325E | Gasket, 440-T4/4T60E Lower Channel Plate (One Piece Design) L1985-Up | 1 |
| 325 | Part # 84325G | Gasket, 4T65E Lower Channel Plate & Modulator 1997-Up (4th Design) Retro Fits All 4T65E | — |
| 325 | Part # 84325GW | Gasket, 4T65E Lower Channel Plate & Modulator (Rubber Coated Metal) 1997-Up | — |
| 327 not on diagram | Part # 84327 | Gasket, 440-T4 Modulator Port 1983-93 | 1 |
| 330 | Part # 84330 | Lip Seal, 440-T4/4T60E/4T65E 4th Clutch Piston (Inner) 1983-Up | 1 |
| 330 | Part # 84330L | Lip Seal, 440-T4/4T60E 4th Clutch Piston (Inner)(Allante) 1989-Up | — |
| 331 | Part # 84331 | Lip Seal, 440-T4/4T60E/4T65E 4th Clutch Piston (Outer) 1983-Up | 1 |
| 331 | Part # 84331L | Lip Seal, 440-T4/4T60E 4th Clutch Piston (Outer)(Allante) 1989-Up | — |
| 332 | Part # 84332V | Lip Seal, 440-T4 2nd Clutch Piston (Inner) 1983-Up | 1 |
| 333 | Part # 84333 | Lip Seal, 440-T4 2nd Clutch Piston (Outer) 1983-Up | 1 |
| 334 | Part # 84334 | Lip Seal, 440-T4/4T60E/4T65E Input Clutch Piston (Inner) 1983-Up | 1 |
| 335 | Part # 84335 | Lip Seal, 440-T4/4T60E/4T65E Input Clutch Piston (Outer) 1983-Up | 1 |
| 336 | Part # 84336 | Lip Seal, 440-T4/4T60E/4T65E 3rd Clutch Piston (Inner) 4/1983-Up | 1 |
| 336 | Part # 84336A | Lip Seal, 440-T4 3rd Clutch Piston (Inner) 1/1983-3/1983 | 1 |
| 336 | Part # 84336B | Replaced by 86353 | — |
| 337 | Part # 84337 | Lip Seal, 440-T4/4T60E 3rd Clutch Piston (Outer) 1983-Up | 1 |
| 345 | Part # 84345 | Lathe Cut Seal, 125/125C Governor Cover 1980-Up | — |
| 348 | Part # 84348 | Lathe Cut Seal, 4T60E Extension Housing 1991-Up | 1 |
| 348 | Part # 84348G | Lathe Cut Seal, 4T65E Extension Housing 1997-Up | — |
| 350 | Part # 84350 | Lathe Cut Seal, 440-T4/4T60E/4T65E Converter Clutch Accumulator Piston 1983-Up | 1 |
| 351 not on diagram | Part # 84351 | Lathe Cut Seal, 440-T4 Input Clutch Accumulator Piston 1983-93 | — |
| 352 | Part # 54352A | Lathe Cut Seal, 200-4R 1-2 Accumulator 1981-90 | 1 |
| 352 | Part # 84352G | Lathe Cut Seal, 4T65E 1-2 & 3-4 Accumulator Piston 1997-Up | — |
| 354 | Part # 84354A | Replaced by 44369A | 1 |
| 362 | Part # 84362A | Lathe Cut Seal, 4T60E 2-1 Servo Cover Feed to Case (.066” Thick) 1991-96 | 1 |
| 362 | Part # 84362G | Lathe Cut Seal, 4T60E/4T65E 2-1 Servo Cover Feed To Case (.118” Thick) 1997-Up | 1 |
| 363 | Part # 84363A | Lip Seal, 440-T4/4T60E/4T65E Reverse Servo Piston (Short Lip) 1983-Up (Also Fits Forward Servo Piston) | 1 |
| 363 | Part # 84363B | Lip Seal, 440-T4/4T60E/4T65E Reverse Servo Piston (Long Tip) 1983-Up 1983-Up | — |
| 364 | Part # 84364 | O-Ring, 440-T4 1-2 & Reverse Servo Cover 1983-91 (Also Fits 4T60E Reverse Servo Cover 1991-Up) | 1 |
| 364 | Part # 84364B | O-Ring, 4T60E 1-2 Servo Cover To Case 1991-Up | 1 |
| 364 | Part # 84364C | O-Ring, 4T65E Reverse Band Servo Cover 1997-04 | — |
| 364 | Part # 84364G | Lathe Cut Seal, 4T65E Forward Servo Cover 1997-Up | — |
| 365 | Part # 84365A | Lathe Cut Seal, 4T60E/4T65E 2-1 Servo Piston 1991-Up | 1 |
| 365 | Part # 84365G | Lip Seal, 4T65E 2-1 Servo Piston 1997-Up | — |
| 366 | Part # 84366A | O-Ring, 4T60E/4T65E 2-1 Servo Piston Housing 1991-Up | 1 |
| 368 | Part # 103368 | O-Ring, 125/125C Speed-O Sleeve (Inner) 1980-Up | 3 |
| 369 | Part # 64369 | O-Ring, 125/125C Speed-O Housing 1980-Up | — |
| 369 | Part # 84369 | O-Ring, 440-T4 Modulator 1983-Up (Use 106368) | — |
| 370 | Part # 84370 | O-Ring, 4T60E/4T65E Speed Sensor 1991-Up | — |
| 371 | Part # 44371B | Boot, 125C Filler Tube 1980-Up | 2 |
| 371 | Part # 84371H | Boot, 4T65E (Volvo) Filler Tube 1999-Up | — |
| 372 not on diagram | Part # 84372 | O-Ring, 440-T4 Actuator Guide 1983-Up | — |
| 372 not on diagram | Part # 84372A | O-Ring, 4T60E/4T65E Actuator Guide 1997-Up | — |
| 373 not on diagram | Part # 54373B | Boot, 125C Detent 1980-Up | 2 |
| 376 not on diagram | Part # 84376 | O-Ring, 440-T4/4T60E Converter Clutch Solenoid Screen 1983-Up | 1 |
| 379 | Part # 84379 | Boot, 4L80E Filter Neck 1991-Up | 1 |
| 380 not on diagram | Part # 64380 | O-Ring, 125/125C Turbine Shaft (Goes Behind Splines) 1982-Up | 1 |
| 383 | Part # 83383A | Cup Seal, 440-T4 Servo Pipe to Case 1983-93 | 1 |
| 383 | Part # 84383 | Cup Seal, 440-T4 Servo Pipe to Valve Body 1983-93 | 1 |
| 383 | Part # 84383B | Lathe Cut Seal, 440-T4 Lube Pipe Seal 1983-93 | 1 |
| 383 | Part # 84383C | Cup Seal, 440-T4 3-2 Coast Down (Up-Date) 1983-93 | 1 |
| 538 | Part # 84538 | Ring, 440-T4/4T60E/4T65E Pump Vane 1983-Up | 1 |
| 766 | Part # S84766P | Side Cover Plate, 440-T4 (Repairs Inner Gasket Leaks on Side Cover) (Sonnax) 1983-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 031 | Part # 64031B | Bushing, 125C Converter Hub 1982-Up | 1 |
| 032 | Part # 84032 | Replaced by 54036A | — |
| 036 not on diagram | Part # 54036A | Bushing, 125/125C Converter Reactor (Stator) 1980-Up | 1 |
| 045 | Part # 84045 | Bushing, 440-T4/4T60E/4T65E Driven Sprocket Support (2.140”OD)(1.975”ID)(.575”Tall) 1983-Up | 1 |
| 046 | Part # 84046 | Bushing, 440-T4/4T60E/4T65E 2nd Clutch Housing (Rear) 1983-Up | 1 |
| 046 | Part # 84046B | Bushing, 440-T4/4T60E/4T65E 2nd Clutch Housing (Front) 1983-Up | 1 |
| 048 | Part # 84048 | Bushing, 440-T4/4T60E Input Drum (No Grooves) 1983-96 | 1 |
| 048 | Part # 84048A | Bushing, 4T60E/4T65E Input Drum (With Grooves) 1997-Up | — |
| 052 not on diagram | Part # 84052 | Bushing, 440-T4 Input Sun Gear 1983-84 | — |
| 053 | Part # 84053 | Bushing, 440-T4 Front Planet 1983-85 | 1 |
| 053 | Part # 84053A | Bushing, 440-T4/4T60E Front Planet 1986-91 | 1 |
| 054 not on diagram | Part # 84054 | Bushing, 440-T4/4T60E Final Drive Internal Gear Shaft 1983-Up | 1 |
| 056 | Part # 84056 | Bushing, 440-T4 Rear Sun Gear (Front)(1-2 Band Drum) 1983-92 | 1 |
| 056 | Part # 84056AA | Bushing, 4T60E/4T65E Rear Sun Gear (Front Bushing)(Reaction Drum)(Also 4T60E Forward Band Drum #559) 1991-95 | 1 |
| 056 | Part # 84056AB | Bushing, 4T60E/4T65E Rear Sun Gear (Rear)(Forward Band Drum) 1991-Up | 1 |
| 060 | Part # 64060 | Bushing, 125/125C Case & Final Drive Gear 1980-Up (1.555”OD)(1.435”ID)(.425”Tall) | 1 |
| 060 | Part # 84060 | Bearing, 4T60E/4T65E Extension Housing (Use 84271)(Some 1996-Up) | — |
| 061 | Part # 84061A | Bushing, 4T60E 2-1 Coast Drum (11/16” Wide)(Center Band Drum)1991-95 (When Out Use 84056AA) | 1 |
| 061 | Part # 84061B | Bushing, 4T60E/4T65E 2-1 Coast Drum (1 1/4” Wide)(Center Band Drum) 1996-Up | — |
| 151 not on diagram | Part # 84151 | Spacer, 440-T4 Shell Spacer 1983-Up | 1 |
| 209 | Part # 84209 | Bearing, 440-T4/4T60E Pump Shaft 1983-Up | 1 |
| 217 | Part # 84217 | Bearing, 440-T4/4T60E 4th Clutch Hub to Channel Plate 1983-Up | 1 |
| 217 | Part # 84217G | Washer, 4T65E 4th Clutch Hub to Channel Plate (3 Tab) 1997-Up | 1 |
| 220 | Part # 84220A | Bearing, 440-T4/4T60E 4th Clutch Hub 1983-96 | — |
| 220 | Part # 84220G | Bearing, 4T65E 4th Clutch Hub (Split, Fits on O.P. Shaft) 1997-Up (Use 84241A) | — |
| 226 | Part # 84226 | Washer, 440-T4/4T60E Driven Sprocket Support to 2nd Clutch Drum 1983-Up | 1 |
| 226 | Part # 84226G | Washer, 4T65E Driven Sprocket Support to 2nd Clutch Drum (2 Tab) 1997-Up | 1 |
| 229 | Part # 84229 | Bearing, 440-T4/4T60E 2nd Clutch Drum to Input Drum 3 1/16”OD (Can Use 84229G) | 1 |
| 229 | Part # 84229G | Bearing, 4T65E 2nd Clutch Drum to Input Drum 3”OD (Can Use 84229) 1997-Up | — |
| 230 | Part # 84230 | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (2.90MM-3.00MM) 1983-Up | 1 |
| 230 | Part # 84230A | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (3.05MM-3.15MM) 1983-Up | 1 |
| 230 | Part # 84230B | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (3.20MM-3.30MM) 1983-Up | 1 |
| 230 | Part # 84230C | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (3.35MM-3.45MM) 1983-Up | 1 |
| 230 | Part # 84230D | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (3.50MM-3.60MM) 1983-Up | 1 |
| 230 | Part # 84230E | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (3.65MM-3.75MM) 1983-Up | 1 |
| 230 | Part # 84230EA | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (3.80MM-3.90MM) 1983-Up | 1 |
| 230 | Part # 84230G | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (3.95MM-4.05MM) 1983-Up | 1 |
| 230 | Part # 84230H | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (4.10MM-4.20MM) 1983-Up | 1 |
| 230 | Part # 84230HA | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (4.25MM-4.35MM) 1983-Up | 1 |
| 230 | Part # 84230J | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (4.40MM-4.50MM) 1983-Up | 1 |
| 230 | Part # 84230JA | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (4.55MM-4.65MM) 1983-Up | 1 |
| 230 | Part # 84230L | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (4.70MM-4.80MM) 1983-Up | 1 |
| 230 | Part # 84230M | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (4.85MM-4.95MM) 1983-Up | 1 |
| 230 | Part # 84230N | Washer, 440-T4/4T60E 2nd Clutch 3.033”OD (5.00MM-5.10MM) 1983-Up | 1 |
| 230 | Part # 84230P | Washer, 4T65E 2nd Clutch 2.971”OD (2.90MM-3.00MM) 1997-Up | — |
| 230 | Part # 84230PA | Washer, 4T65E 2nd Clutch 2.971”OD (3.05MM-3.15MM) 1997-Up | — |
| 230 | Part # 84230PB | Washer, 4T65E 2nd Clutch 2.971”OD (3.20MM-3.30MM) 1997-Up | — |
| 230 | Part # 84230PC | Washer, 4T65E 2nd Clutch 2.971”OD (3.35MM-3.45MM) 1997-Up | — |
| 230 | Part # 84230PD | Washer, 4T65E 2nd Clutch 2.971”OD (3.50MM-3.60MM) 1997-Up | — |
| 230 | Part # 84230PE | Washer, 4T65E 2nd Clutch 2.971”OD (3.65MM-3.75MM) 1997-Up | — |
| 230 | Part # 84230PEA | Washer, 4T65E 2nd Clutch 2.971”OD (3.80MM-3.90MM) 1997-Up | — |
| 230 | Part # 84230PG | Washer, 4T65E 2nd Clutch 2.971”OD (3.95MM-4.05MM) 1997-Up | — |
| 230 | Part # 84230PH | Washer, 4T65E 2nd Clutch 2.971”OD (4.10MM-4.20MM) 1997-Up | — |
| 230 | Part # 84230PHA | Washer, 4T65E 2nd Clutch 2.971”OD (4.25MM-4.35MM) 1997-Up | — |
| 230 | Part # 84230PJ | Washer, 4T65E 2nd Clutch 2.971”OD (4.40MM-4.50MM) 1997-Up | — |
| 230 | Part # 84230PJA | Washer, 4T65E 2nd Clutch 2.971”OD (4.55MM-4.65MM) 1997-Up | — |
| 230 | Part # 84230PL | Washer, 4T65E 2nd Clutch 2.971”OD (4.70MM-4.80MM) 1997-Up | — |
| 230 | Part # 84230PM | Washer, 4T65E 2nd Clutch 2.971”OD (4.85MM-4.95MM) 1997-Up | — |
| 230 | Part # 84230PN | Washer, 4T65E 2nd Clutch 2.971”OD (5.00MM-5.10MM) 1997-Up | — |
| 232 | Part # 84232 | Washer, 440-T4 Input Drum (Rear)(4 Tab) 1983-88 | 1 |
| 232 | Part # 84232A | Bearing, 440-T4/4T60E/4T65E Input Drum (Rear) 1989-Up | 1 |
| 233 | Part # 84233C | Needle Bearing, 4T60E Input Drum (Pressed Inside) L1993-Up | 1 |
| 237 | Part # 84237 | Bearing, 440-T4/4T60E Inside Front Planet 1983-Up | — |
| 238 | Part # 84238 | Bearing, 440-T4/4T60E/4T65E Front Planet to Rear Planet 1983-Up | 1 |
| 241 | Part # 84241 | Bearing, 440-T4 Sun Gear (Split, Inner)(1 3/4” long) 1983-90 | 1 |
| 241 | Part # 84241A | Bearing, 440-T4/4T60E Sun Gear (Split, Inner)(3/4” long) 1991-6/93… | 1 |
| 247 | Part # 54247A | Bearing, 125/125C Rear Sungear & Final Drive Sungear (Rear) 1980-Up | 1 |
| 247 | Part # 84247 | Bearing, 440-T4/4T60E/4T65E Differential to Sun Gear 2.191”OD 1983-Up | 1 |
| 247 | Part # 84247A | Bearing, 440-T4/4T60E/4T65E Differential to Sun Gear 2.125”OD 1983-Up | 1 |
| 247 | Part # 84247B | Bearing, 4T60E/4T65E Differential to Sun Gear 2.250”OD 1996-Up | — |
| 251 | Part # 84251 | Bearing, 440-T4/4T60E/4T65E Rear Planet to Sun Gear Drum 1983-Up | 1 |
| 254 | Part # 84254 | Bearing, 440-T4/4T60E Park Gear to Ring Gear (2.600”OD) 1983-Up | 1 |
| 254 | Part # 84254A | Bearing, 4T60E Park Gear to Ring Gear (2.605”OD) 1996-Up | 1 |
| 254 | Part # 84254G | Bearing, 4T65E Park Gear to Ring Gear (.155” Thick)(2.745”OD) 1997-Up | — |
| 255 | Part # 84255G | Shim, 4T65E (AWD) Park Gear To Final Drive Sun Gear (With Inner Splines) 1997-Up | — |
| 257 | Part # 84257 | Bearing, 440-T4/4T60E Reaction Drum to Internal Ring Gear 1983-94 (Also Fits Some 4T65E 1997-Up) | 1 |
| 257 | Part # 84257B | Race, 4T60E/4T65E Reaction Drum to Internal Ring Gear (.140” Thick) 1995-Up (Also Fits Some 4T65E 1997-Up) | — |
| 265 | Part # 64265A | Bearing, 125C Governor to Cover 1982-Up | 2 |
| 271 not on diagram | Part # 84271 | Caged Needle Bearing, 4T60E/4T65E Extension Housing (1.855”OD)(.470” Wide) 1996-Up (Cast # USA HK4012) | 1 |
| 271 not on diagram | Part # 84271A | Caged Needle Bearing, 4T60E/4T65E Extension Housing (2 1/2”ID)(Turbo) 1996-Up | — |
| 275 | Part # 84275G | Caged Needle Bearing, 4T60E/4T65E Channel Plate To Axle 1996-Up (1.630”OD)(.430”Wide) (Cast # Torrington DC-66433) | 1 |
| 275 | Part # T64275 | Axle Stabilizer, 125/125C Bearing Type (OEM)(Teckpak) 1980-Up | — |
| 278 | Part # 84278 | Washer, 440-T4/4T60E Drive Sprocket to Channel Plate .068” (3 tab) 1983-Up | 1 |
| 278 | Part # 84278G | Washer, 4T65E Drive Sprocket to Channel Plate .048” (3 tab) 1997-Up | 1 |
| 279 | Part # 64279A | Washer, 125C Drive Sprocket to Support 1986-Up | 1 |
| 279 | Part # 84279G | Washer, 4T65E Drive Sprocket to Support (3 Tab) 1997-Up | 1 |
| 279 | Part # 84279GA | Washer, 4T65E Drive Sprocket To Support (3 Tab) 2001-Up (The 3 Tabs Are Round And Split To Lock On The Sprocket) | — |
| 280 | Part # 84280 | Washer, 440-T4/4T60E 4th Clutch Hub to Driven Support (2.835”OD) 1983-Up | 1 |
| 280 | Part # 84280G | Washer, 4T65E 4th Clutch Hub to Driven Support (2.465”OD) 1997-Up | 1 |
| 281 | Part # 84281 | Washer, 440-T4/4T60E Driven Sprocket to Support (4 Tab) 1983-Up | 1 |
| 281 | Part # 84281G | Washer, 4T65E Driven Sprocket to Support (3 Tab) 1997-Up | 1 |
| 286 | Part # 84286B | Bearing, 4T60E 1-2 Inner Race to Forward Band Drum (2.338”ID, 3.220”OD) 1991-Up | 1 |
| 286 | Part # 84286C | Bearing, 4T65E 1-2 Inner Race to Forward Band Drum (2.296”ID, 3.475”OD) 1997-Up | — |
| 292 | Part # 64292 | Bearing, 125/125C Differential to Case (1.443”ID, 2.250”OD) 1980-Up | 1 |
| 292 | Part # 84292A | Bearing, 4T60E/4T65E Differential To Case (1.918”ID, 2.590”OD) | — |
| 292 | Part # 84292H | Bearing W/Races, 4T65E (Volvo) Differential To Case (2.845”ID)(3.573”OD) 1999-Up | — |
| 293 | Part # 64293 | Spacer, 125/125C Differential to Case 1.45MM 1980-Up | 1 |
| 293 | Part # 64293A | Spacer, 125/125C Differential to Case 1.55MM 1980-Up | 1 |
| 293 | Part # 64293B | Spacer, 125/125C Differential to Case 1.65MM 1980-Up | 1 |
| 293 | Part # 64293C | Spacer, 125/125C Differential to Case 1.75MM 1980-Up | 1 |
| 293 | Part # 64293D | Spacer, 125/125C Differential to Case 1.85MM 1980-Up | 1 |
| 293 | Part # 64293E | Spacer, 125/125C Differential to Case 1.95MM 1980-Up | 1 |
| 293 | Part # 64293F | Spacer, 125/125C Differential to Case 2.05MM 1980-Up | 1 |
| 293 | Part # 64293G | Spacer, 125/125C Differential to Case 2.15MM 1980-Up | 1 |
| 293 | Part # 64293H | Spacer, 125/125C Differential to Case 2.25MM 1980-Up | 1 |
| 293 | Part # 64293J | Spacer, 125/125C Differential to Case 2.35MM 1980-Up | 1 |
| 295 | Part # 64295 | Bearing, 125/125C Converter Reactor (Rear) 1980-Up | 1 |
| 298 | Part # 84298 | Needle Bearing, 440-T4/4T60E/4T65E Driven Sprocket Support 1983-Up | 1 |
| 619 | Part # 84619 | Spacer, 440-T4 Input Sun Gear .497” 1983-84 | 1 |
| 619 | Part # 84619A | Spacer, 440-T4/4T60E Input Sun Gear .350” 1985-E93 | 1 |
| 619 | Part # 84619B | Spacer, 4T60E/4T65E Input Sun Gear .339” L1993-Up | 1 |
| 664 | Part # 84664 | Inner Race, 4T60E 1-2 Roller 1991-95 | 1 |
| 667 | Part # 84667 | Outer Race, 440-T4 3rd Clutch Sprag 1983-86 | 1 |
| 667 | Part # 84667A | Outer Race, 440-T4/4T60E 3rd Clutch Sprag 1988-E93 | 1 |
| 667 | Part # 84667B | Outer Race, 4T60E/4T65E 3rd Clutch Sprag L1993-Up | — |
| 668 | Part # 84668 | Inner Race, 440-T4/4T60E Input Sprag 1983-E93 | — |
| 668 | Part # 84668A | Inner Race, 4T60E/4T65E 3rd Clutch & Input Sprag (1 Piece) L1993-Up | — |
| 669 | Part # 84669 | Outer Race, 440-T4/4T60E Input Sprag 1988-E93 | — |
| 669 | Part # 84669A | Outer Race, 4T60E/4T65E Input Sprag L1993-Up | — |
| 717 not on diagram | Part # S84717A-7 | Washer, 440-T4/4T60E/4T65E Differential Side Gear (4 Per Set) (Sonnax) | — |
| 741 not on diagram | Part # 84741NA-7 | Bushing, 440-T4 Throttle Valve Plunger .540” (Stamped K) 1983-Up | 1 |
| 741 not on diagram | Part # 84741NB-7 | Bushing, 440-T4 Throttle Valve Plunger .625” (Stamped L) 1983-Up | 1 |
| 741 not on diagram | Part # 84741NC-7 | Bushing, 440-T4 Throttle Valve Plunger .725” (Stamped M) 1983-Up | 1 |
| 741 not on diagram | Part # 84741ND-7 | Bushing, 440-T4 Throttle Valve Plunger .745” (Stamped H) 1983-Up | 1 |
| 741 not on diagram | Part # 84741NE-7 | Bushing, 440-T4 Throttle Valve Plunger .775” (Stamped P) 1983-Up | 1 |
| 854 not on diagram | Part # 84854 | Cushion Spacer, 440-T4 Reverse Servo 1983-Up | 1 |
| 980 not on diagram | Part # 84980 | Spacer, 4T60E 1-2 Sprag to Drum 1991-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 84022 | Band, 440-T4 1-2 (Rear) 1983-Up | 1 |
| 022 | Part # 84022E | Band, 4T60E/4T65E Forward (Rear) 1991-Up | 1 |
| 022 | Part # 84022EA | Band, 4T65E Forward (Rear) (High Energy) 2001-Up | — |
| 024 | Part # 84024 | Band, 440-T4 Reverse (Front) 1983-Up | 1 |
| 024 | Part # 84024A | Band, 4T60E/4T65E Reverse (Front) 1991-Up | 1 |
| 024 | Part # 84024AA | Band, 4T65E Reverse (Front) (High Energy) 2001-Up | — |
| 026 | Part # 84026A | Band, 4T60E/4T65E 2-1 Coast (Center) 1991-Up | 1 |
| 026 | Part # 84026G | Band, 4T65E 2-1 Coast (Center) (Hi-Energy) 2000-Up | — |
| 741 not on diagram | Part # S84741DAK | Servo Boost Valve Kit, 4T60E/4T65E Forward/Reverse (Sonnax) Includes: 1 Oversize Valve, 2 Springs, 1 Retaining Pin… | — |
| 900 not on diagram | Part # 84900 | Servo Assembly, 4T60E/4T65E Manual 2-1 (Forward) 1991-Up | 1 |
| 905 not on diagram | Part # 84905 | Servo Assembly, 440-T4 1-2 Servo (Cover Uses A Snap Ring) 1983-91 | — |
| 905 not on diagram | Part # 84905E | Servo Assembly, 4T60E 1-2 Servo (3 Bolt Cover W/O-Ring Groove) 1991-Up | — |
| 905 not on diagram | Part # 84905G | Servo Assembly, 4T65E 1-2 Servo (Lathe Cut Seal Type Cover) 1997-Up | — |
| 910 not on diagram | Part # 84910 | Servo Assembly, 440-T4 Reverse Servo 1983-91 | — |
| 910 not on diagram | Part # 84910E | Servo Assembly, 4T60E Reverse Servo (Cover is 1 1/4” Overall Thickness) 1991-Up | — |
| 910 not on diagram | Part # 84910G | Servo Assembly, 4T65E Reverse Servo (Cover is 3/4” Overall Thickness) 1997-Up | — |
| 917 not on diagram | Part # 84917G-3 | Anchor, 4T65E Reverse & Forward Band 1997-Up | — |
| 921 not on diagram | Part # 84921 | Band Stop, 440-T4 1-2 Band (Plastic) 1983-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 84500 | Pump, 440-T4 (2 Pressure Switches, No 3-2 Tube Hole) 1983-E85 | 1 |
| 500 not on diagram | Part # 84500AA | Pump, 440-T4 (3 Pressure Switches, No 3-2 Tube Hole) 1983-87 | 1 |
| 500 not on diagram | Part # 84500AB | Pump, 440-T4 (2 Pressure Switches, No 3-2 Tube Hole) L1985-86 | — |
| 500 not on diagram | Part # 84500B | Pump, 440-T4 (2 Pressure Switches, No 3-2 Tube Hole) L1985-86 (W/1 Small Thermal Switch)(Cadillac W/Viscous Converter) | — |
| 500 not on diagram | Part # 84500BA | Pump, 440-T4 (2 Pressure Switches, W/3-2 Tube Hole) 1987-91 (W/1 Small Thermal Switch)(Cadillac W/Viscous Converter) | — |
| 500 not on diagram | Part # 84500C | Pump, 440-T4 (2 Pressure Switches, W/3-2 Tube Hole) 1987-91 (Except Cadillac W/Viscous Converter) | 1 |
| 500 not on diagram | Part # 84500DA | Pump, 440-T4 (3 Pressure Switches, W/3-2 Tube Hole) 1988-91 | — |
| 500 not on diagram | Part # 84500E | Pump, 4T60E (No Switches, No Brass Air Bleed)(Cover Cast # 8651508, Body Cast # 24200370) 1991-Up | 2 |
| 500 not on diagram | Part # 84500EA | Pump, 4T60E (No Switches, W/Brass Air Bleed) 1991-Up | — |
| 500 not on diagram | Part # 84500EB | Pump, 4T60E (2 Switches, No Brass Air Bleed) 1991-Up | — |
| 500 not on diagram | Part # 84500EC | Pump, 4T60E (2 Switches, W/Brass Air Bleed) 1991-Up | — |
| 500 not on diagram | Part # 84500ED | Pump, 4T60E (No Switches, No Brass Air Bleed)(10 Bolt Cover Cast # 24201742)(Body Cast # 24201740) 1991-Up | 2 |
| 500 not on diagram | Part # 84500EE | Pump, 4T60E (No Switches, No Brass Air Bleed)(11 Bolt Cover Cast # 24201742)(Body Cast # 24201740) 1991-Up | 2 |
| 500 not on diagram | Part # 84500G | Pump, 4T65E (Cover Cast # 24205910 or 24209404 or 24213197)( Body Cast # 24206183 or 24210098) 1997-Up | 5 |
| 500 not on diagram | Part # 84500GB | Pump, 4T65E (Cover Cast # 24221692) 2002-Up | 1 |
| 520 | Part # 84520E | Pump Cover, 4T60E (11 Bolt) (Cast # 8651508) 1991-Up | 1 |
| 520 | Part # 84520ED | Pump Cover, 4T60E (10 Bolt) (Cast # 24201197 or 24201404) 1991-Up | 2 |
| 520 | Part # 84520EE | Pump Cover, 4T60E (11 Bolt) (Cast # 24201742) 1991-Up | 1 |
| 532 | Part # 84532AB | Rotor, 440-T4/4T60E Pump 17.95MM (The Outside Of The Rotor Is Straight Front To Back) (Fits 84500 To 84500EC) (9 Vane)… | 1 |
| 532 | Part # 84532EA | Rotor, 4T60E Pump 17.99MM (The Outside Of The Rotor Is Beveled Front To Back) (Fits 84500EE) (Retro Fits) (9 Vane)… | — |
| 532 | Part # 84532GA | Rotor, 4T65E Pump 17.99MM (The OUtside Of The Rotor Is Beveled Front To Back) (Fits 84500G tTo 84500GA) (11 Vane)… | — |
| 533 | Part # 84533AA | Vane, 440-T4 Pump 17.95MM 1983-Up | 1 |
| 533 | Part # 84533AB | Vane, 4T60E/4T65E Pump 17.97MM 1991-Up | 1 |
| 534 | Part # 84534AB | Slide, 440-T4/4T60E/4T65E Pump (17.96MM) 1983-Up | 1 |
| 534 | Part # 84534EA | Slide, 4T60E/4T65E Pump 17.99MM 1991-Up | 1 |
| 671 | Part # 84671 | Pump Shaft, 440-T4/4T60E Oil Pump Drive (9 3/4” Long) 1983-Up | 1 |
| 671 | Part # 84671G | Pump Shaft, 4T65E Oil Pump Drive (10” Long) 1997-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 84100 | Friction, 440-T4 4th Clutch .090” 1983-88 | 1 |
| 100 | Part # 84100A | Friction, 440-T4/4T60E 4th Clutch .070” (18 Teeth) 1989-Up | 1 |
| 100 | Part # 84100AA | Friction, 440-T4 4th Clutch .090” (Bent Tooth) 1983-88 | — |
| 100 | Part # 84100B | Friction, 440-T4/4T60E 4th Clutch .070” (Bent Tooth) 1989-Up | — |
| 100 | Part # 84100G | Friction, 4T65E 4th Clutch .070” (32 Teeth) 1997-Up | 1 |
| 100 | Part # 84100H | Friction, 4T65E 4th Clutch (.062”) 1 Sided Friction (Internal Teeth) (Volvo) 1999-Up | — |
| 104 | Part # 84104 | Friction, 440-T4/4T60E 2nd Clutch (.070”) 1983-93 (Use 84104A) | 1 |
| 104 | Part # 84104A | Friction, 4T60E 2nd Clutch (Grooved) (.070”) 1994-Up (Retro Fits 1983-Up) | 1 |
| 104 | Part # 84104BHP | Friction, 440-T4/4T60E 2nd Clutch .063” (Hi-Performance) 1983-Up | — |
| 104 | Part # 84104C | Friction, 440-T4 2nd Clutch (.060”) 1983-93 | — |
| 104 | Part # 84104G | Friction, 4T65E 2nd Clutch (Smooth) 1997-Up | 1 |
| 104 | Part # 84104GA | Friction, 4T65E 2nd Clutch (High Energy Eclipse)(.067”Thick) 1997-Up | — |
| 106 | Part # 84106 | Friction, 440-T4 3rd Clutch .089” 1983-86 | 1 |
| 106 | Part # 84106A | Friction, 440-T4 3rd Clutch .083” (1 Sided Friction, Internal Teeth) 1983-88 | 1 |
| 106 | Part # 84106B | Friction, 440-T4/4T60E/4T65E 3rd Clutch .079” (1 Sided Friction, Internal Teeth) 1989-Up | 1 |
| 106 | Part # 84106BA | Friction, 440-T4/4T60E/4T65E 3rd Clutch .079” (1 Sided Friction, Internal Teeth) High Energy 1989-Up | — |
| 106 | Part # 84106G | Friction, 4T65E 3rd Clutch (.083”)(1 Sided Friction, Internal Teeth) Eclipse, High Energy 2001-Up (Retro Fits To 1983) | — |
| 108 | Part # 84108 | Friction, 440-T4/4T60E Input Clutch (.090”) 1983-E94 | 1 |
| 108 | Part # 84108A | Friction, 4T60E/4T65E Input Clutch (.065”) (32 Teeth) L1994-02 | 1 |
| 108 | Part # 84108G | Friction, 4T65E Input Clutch (.064”) (30 Teeth) 2003-Up | — |
| 108 | Part # 84108GS1 | Friction, 4T65E Input Clutch (.064”)(30 Teeth)(Stage 1) 2003-Up | — |
| 119 not on diagram | Part # 84119 | Friction Module, 440-T4 1983-88 | — |
| 119 not on diagram | Part # 84119B | Friction Module, 440-T4 1989-92… | — |
| 119 not on diagram | Part # 84119E | Friction Module, 4T60E 1991-94 | — |
| 119 not on diagram | Part # 84119EA | Friction Module, 4T60E 1995-Up | — |
| 119 not on diagram | Part # 84119EAS1 | Friction Module, 4T60E (Stage 1) 1995-Up | — |
| 119 not on diagram | Part # 84119G | Friction Module, 4T65E 1997-02 | — |
| 119 not on diagram | Part # 84119GAS1 | Friction Module, 4T65E (Stage 1) 2003-Up | — |
| 119 not on diagram | Part # 84119H | Friction Module, 4T65E (Volvo) 1999-02 | — |
| 119 not on diagram | Part # 84119HA | Friction Module, 4T65E (Volvo) 2003-Up | — |
| 120 | Part # 84120 | Steel, 440-T4/4T60E 4th Clutch .080” 1983-86 | 1 |
| 120 | Part # 84120B | Steel, 440-T4/4T60E 4th Clutch .074” 1987-Up | 1 |
| 120 | Part # 84120G | Steel, 4T65E 4th Clutch (.083”) 1997-Up | 1 |
| 120 | Part # 84120H | Friction, 4T65E 4th CLutch (.062”) 1 Sided Friction (External Teeth) (Volvo) 1999-Up | — |
| 124 | Part # 84124 | Steel, 440-T4 2nd Clutch .090” 1983-86 | 1 |
| 124 | Part # 84124A | Steel, 440-T4/4T60E 2nd Clutch .077” 1987-Up | 1 |
| 124 | Part # 84124C | Steel, 440-T4 2nd Clutch .090” (Kolene) 1983-86 | 1 |
| 124 | Part # 84124D | Steel, 440-T4/4T60E 2nd Clutch .077” (Kolene) 1987-Up | 1 |
| 124 | Part # 84124G | Steel, 4T65E 2nd Clutch .068” (36 Teeth) 1997-Up | 1 |
| 124 | Part # 84124GA | Steel, 4T65E 2nd Clutch .089” (36 Teeth) 1997-Up | — |
| 125 | Part # 84125 | Steel, 440-T4/4T60E 2nd Clutch .044” (34 Teeth)(Waved) 1985-Up | 1 |
| 125 | Part # 84125G | Steel, 4T65E 2nd Clutch .065” (36 Teeth)(Waved) 1997-Up | 1 |
| 126 | Part # 84126 | Steel, 440-T4 3rd Clutch .090” 1983-86 | 1 |
| 126 | Part # 84126A | Friction, 440-T4 3rd Clutch .083” (1 Sided Friction, External Teeth) 1985-88 | 1 |
| 126 | Part # 84126B | Friction, 440-T4/4T60E/4T65E 3rd Clutch .079” (1 Sided Friction, Ext. Teeth) 1989-Up | 1 |
| 126 | Part # 84126G | Friction, 440-T4/4T60E/4T65E 3rd Clutch (.079”)(1 Sided Friction, External Teeth) Eclipse, High Energy 1989-Up | — |
| 127 | Part # 84127 | Steel, 440-T4/4T60E 3rd Clutch (.030”) (Waved) 1983-Up | 1 |
| 127 | Part # 84127A | Steel, 440-T4/4T60E 3rd Clutch (.048”)(6 Teeth)(Waved) 1987-Up | 1 |
| 127 | Part # 84127AA | Steel, 440-T4/4T60E 3rd Clutch (.048”)(6 Teeth)(Waved) (Kolene) 1987-Up | — |
| 127 | Part # 84127G | Steel, 4T65E 3rd Clutch (.040”)(6 Teeth)(Waved) 1997-Up | — |
| 128 | Part # 64128 | Steel, 125/125C Forward Clutch .076” (Flat) 1980-Up | 1 |
| 128 | Part # 84128 | Steel, 440-T4/4T60E Input Clutch (.050”)(Flat) L1990-E94 | 1 |
| 128 | Part # 84128B | Steel, 4T60E/4T65E Input Clutch (.077”)(Flat) L1994-Up (Use 64128) | — |
| 129 | Part # 64129 | Steel, 125/125C Forward Clutch .050” (Waved) 1980-Up | 2 |
| 129 | Part # 84129A | Steel, 4T60E/4T65E Input Clutch (.041”) (Waved) 1997-Up | — |
| 139 not on diagram | Part # 84139 | Steel Module, 440-T4 1983-86 | — |
| 139 not on diagram | Part # 84139C | Steel Module, 440-T4 1987-E91 | — |
| 139 not on diagram | Part # 84139E | Steel Module, 4T60E 1991-E94 | — |
| 139 not on diagram | Part # 84139EA | Steel Module, 4T60E L1994-Up | — |
| 139 not on diagram | Part # 84139G | Steel Module, 4T65E 1997-Up | — |
| 140 | Part # 84140 | Pressure Plate, 440-T4 4th Clutch .200” 1983-86 | 1 |
| 140 | Part # 84140A | Pressure Plate, 440-T4/4T60E 4th Clutch .160” 1987-92 | 1 |
| 140 | Part # 84140B | Pressure Plate, 4T60E 4th Clutch .135” 1993-Up | 1 |
| 140 | Part # 84140G | Pressure Plate, 4T65E 4th Clutch .128” 1997-Up | 1 |
| 144 | Part # 84144A | Pressure Plate, 440-T4 2nd Clutch (Flat) 1983-85 | — |
| 144 | Part # 84144C | Pressure Plate, 440-T4 2nd Clutch (Beveled W/Internal Snap Ring) 1986-89 | 1 |
| 144 | Part # 84144D | Pressure Plate, 440-T4/4T60E 2nd Clutch .390” (Beveled) 1989-Up | 1 |
| 144 | Part # 84144G | Pressure Plate, 4T65E 2nd Clutch .220” (Beveled) 1997-Up | — |
| 145 | Part # 84145A | Apply Plate, 440-T4/4T60E 2nd Clutch 5 1/2”OD (Flat)(Bottom) 1991-Up | 1 |
| 145 | Part # 85145G | Apply Plate, 4T65E 2nd Clutch 5 5/8”OD (Flat)(Bottom) 1997-Up | 1 |
| 146 | Part # 84146 | Pressure Plate, 440-T4 3rd Clutch 1983-86 | 1 |
| 146 | Part # 84146A | Pressure Plate, 440-T4/4T60E/4T65E 3rd Clutch .150” 1987-Up | 1 |
| 148 | Part # 84148 | Pressure Plate, 440-T4/4T60E/4T65E Input Clutch .190” (Top) 1983-Up | 1 |
| 149 | Part # 84149 | Apply Plate, 440-T4/4T60E/4T65E Input Clutch .190” (Bottom) 1983-Up | 1 |
| 902 | Part # 84902 | Piston, 4T60E/4T65E Manual 2-1 (Forward) 1991-Up | 1 |
| 907 | Part # 84907 | Piston, 440-T4 1-2 Servo 1.180” Tall) (.440”ID) 1983-91 | 1 |
| 907 | Part # 84907E | Piston, 4T60E 1-2 Servo (1.180” Tall) (.555”ID) 1991-Up | — |
| 907 | Part # 84907G | Piston, 4T65E 1-2 Servo .980” Tall (.555”ID) 1997-Up | — |
| 912 | Part # 84912 | Piston, 440-T4/4T60E Reverse Servo 1983-Up | 1 |
| 927 | Part # 84927A | Piston, 440-T4/4T60E 1-2 & 2-3 Accumulator (1 Spring Type) 1983-Up (Also Fits Later Models Using 2 Springs on 1 Side)… | 1 |
| 927 | Part # 84927C | Piston, 4T60E 1-2 & 2-3 Accumulator (2 Springs on 1 Side)( 1” Thick) 1991-Up | — |
| 927 | Part # 84927D | Piston, 4T60E 1-2 & 2-3 Accumulator (1 Spring Each Side)(.308”OD Pin) Some 95-Up | — |
| 927 | Part # 84927E | Piston, 4T65E 1-2 & 2-3 Accumulator (1 Spring Each Side)(.235”OD Pin) 1997-Up | — |
| 932 | Part # 84932 | Piston, 440-T4/4T60E 2-3 Accumulator (Use 84927) 1983-Up | — |
| 932 | Part # 84932G | Piston, 4T65E 2-3 Accumulator (Use 84927) 1997-Up | — |
| 937 | Part # 84937 | Piston, 440-T4 Input Accumulator (Steel) 1983-Up | — |
| 937 | Part # 84937E | Piston, 4T60E 3-4 Accumulator (Aluminum)(1.710”OD) 1991-Up | — |
| 937 | Part # 84937G | Piston, 4T65E 3-4 Accumulator (Aluminum)(1.770”OD) 1997-Up | — |
| 939 | Part # 84939 | Canister, 4T60E 3-4 Accumulator Piston (2” Tall) 1991-Up | 1 |
| 939 | Part # 84939G | Canister, 4T65E 3-4 Accumulator Piston (1 3/4” Tall) 1997-Up | — |
| 942 | Part # 84942A | Piston, 440-T4/4T60E TCC Accumulator 1983-Up | — |
| 960 | Part # 84960 | Piston, 440-T4 4th Clutch 2.190” Tall (1st Design) 1983-85 | 1 |
| 960 | Part # 84960A | Piston, 440-T4/4T60E/4T65E 4th Clutch 2” Tall 1986-Up | 1 |
| 962 | Part # 84962 | Piston, 440-T4 2nd Clutch 1983-91 | 1 |
| 962 | Part # 84962E | Piston, 4T60E 2nd Clutch (5 1/8”OD)(W/Bonded Rubber) 1991-Up | 1 |
| 962 | Part # 84962G | Piston, 4T65E 2nd Clutch (5 3/8”OD)(W/Bonded Rubber) 1997-Up | 1 |
| 964 | Part # 84964 | Piston, 440-T4/4T60E Input Clutch (For 8 Clutches on 3rd Clutch) 1983-91 | 1 |
| 964 | Part # 84964B | Piston, 4T60E/4T65E Input Clutch (For 10 Clutches on 3rd Clutch) 1991-Up | — |
| 965 | Part # 84965 | Piston, 440-T4 3rd Clutch 1983-91 | 1 |
| 965 | Part # 84965A | Piston, 4T60E 3rd Clutch (Bonded)(W/Check Ball) 1991-96 | 1 |
| 965 | Part # 84965G | Piston, 4T60E/4T65E 3rd Clutch (Bonded)(No Check Ball) 1997-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 285 not on diagram | Part # 84285 | Wear Plate, 440-T4/4T60E Input Sprag 1983-Up | 1 |
| 552 | Part # 84552 | Drum, 440-T4 2nd Clutch (5 Clutch)(W/2 Lube Holes in Bore) 1983-86 | 1 |
| 552 | Part # 84552A | Drum, 440-T4 2nd Clutch (5 Clutch)(W/6 Lube Holes in Bore) L1985-86 | 1 |
| 552 | Part # 84552B | Drum, 440-T4 2nd Clutch (6 Clutch)(W/6 Lube Holes in Bore) 1987-91 | 1 |
| 552 | Part # 84552C | Drum, 4T60E 2nd Clutch (6 Clutch)(Uses a Bonded Piston) 1991-Up | 1 |
| 552 | Part # 84552G | Drum, 4T65E 2nd Clutch (6 Clutch)(No Oil Groove Between Rings) 1997-Up (Can Use 84552GA) | — |
| 552 | Part # 84552GA | Drum, 4T65E 2nd Clutch (6 Clutch)(W/Deep Oil Groove Between Rings) 1997-Up | — |
| 554 | Part # 84554 | Drum, 440-T4 Input (Washer Type)(.233” Wide Inner Lip Seal Groove) 1983-87 | — |
| 554 | Part # 84554A | Drum, 440-T4 Input (Washer Type)(.107” Wide Inner Lip Seal Groove) 1983-87 | — |
| 554 | Part # 84554B | Drum, 440-T4 Input (Uses Bearing #232)(Does Not Have A Caged Bearing Inside) 1988-91 | 1 |
| 554 | Part # 84554BA | Drum, 4T60E Input (Uses Bearing #232)(Does Not Have A Caged Bearing Inside) 1991-E93 | 1 |
| 554 | Part # 84554C | Drum, 4T60E Input (W/Caged Bearing Inside)(3.690”OD 2nd Clutch Hub) L1993-Up | 1 |
| 554 | Part # 84554G | Drum, 4T65E Input (W/Caged Bearing Inside)(3.390”OD 2nd Clutch Hub) 1997-Up | — |
| 558 | Part # 84558 | Drum, 440-T4 Reaction W/Sun Gear (2 1/8” Tall) 1983-91 | 1 |
| 558 | Part # 84558A | Drum, 4T60E Reaction W/Sun Gear (2 3/4” Tall)(W/4 Lugs For # 664) 1991-95 | 1 |
| 558 | Part # 84558B | Drum, 4T60E/4T65E Reaction W/Sun Gear (3 1/4” Tall) 1995-Up | — |
| 559 | Part # 84559 | Drum, 4T60E Forward Band Drum (16 Roller Type Sprag) 1991-95 | — |
| 559 | Part # 84559B | Drum, 4T60E/4T65E Forward Band Drum (14 Roller Type Sprag) 1996-Up | — |
| 570 | Part # 84570 | Hub & Shaft, 440-T4/4T60E 4th Clutch 1983-E93 | 1 |
| 570 | Part # 84570A | Hub & Shaft, 4T60E 4th Clutch L1993-95 (Retro Fits 1983-E93) | 1 |
| 570 | Part # 84570B | Hub & Shaft, 4T60E 4th Clutch (No Bearing) 1996-Up | 1 |
| 570 | Part # 84570G | Hub & Shaft, 4T65E 4th Clutch 1997-Up | 1 |
| 582 | Part # 84582 | Planet, 440-T4 Front (.350” Wide Bushing) 1983-85 | 1 |
| 582 | Part # 84582A | Planet, 440-T4 Front (.265” Wide Bushing)(No Bevel on Ring Gear) 1986-91 | 1 |
| 582 | Part # 84582AA | Planet, 4T60E Front (.265” Wide Bushing)(W/Bevel on Outside of Ring Gear) 1991-E93 | — |
| 582 | Part # 84582B | Planet, 4T60E Front W/24 Outer Lugs (No Bushing) L1993-Up | 1 |
| 582 | Part # 84582G | Planet, 4T65E Front W/12 Outer Lugs (No Bushing) 1997-Up | — |
| 584 | Part # 84584 | Planet, 440-T4/4T65E Rear (Inner Splines Beveled on One End Only) 1983-Up | 1 |
| 584 | Part # 84584A | Planet, 4T60E Rear (Inner Splines Beveled on Both Ends) 1991-Up | 1 |
| 598 | Part # 84598 | Ring Gear, 440-T4 Final Drive (70 Teeth, Right Angled) 1983-91 | 1 |
| 598 | Part # 84598A | Ring Gear, 4T60E Final Drive (70 Teeth, Right Angled) 1991-94 (Hub Is 3.146” Tall)(Has A Step To Center Bearing # 254) | 1 |
| 598 | Part # 84598AA | Ring Gear, 4T60E Final Drive (70 Teeth, Right Angled) 1991-94 (Hub Is 3.146” Tall)… | — |
| 598 | Part # 84598B | Ring Gear, 4T60E Final Drive (78 Teeth, Left Angled) 1995-96 | 1 |
| 598 | Part # 84598C | Ring Gear, 4T65E Final Drive (78 Teeth, Right Angled) 1997-Up (Hub Is 3.143” Tall) | — |
| 612 | Part # 84612 | Sun Gear, 440-T4/4T60E Input (Front) 1983-E93 | 1 |
| 612 | Part # 84612A | Sun Gear, 4T60E/4T65E Input (Front)(W/2 Flats on Splines) (Uses A Bearing # 241 Inside) 1990-E95… | 1 |
| 612 | Part # 84612B | Sun Gear, 4T60E/4T65E Input (Front)(W/2 Flats on Splines) (Does Not Use A Bearing # 241 Inside) L1995-Up… | — |
| 618 | Part # 84618 | Sun Gear, 125/125C Differential (38 Teeth) 1980-Up | — |
| 618 | Part # 84618A | Sun Gear, 125/125C Differential (34 Teeth) 1980-Up | 1 |
| 618 | Part # 84618AA | Sun Gear, 4T40E Final Drive (34 Teeth, Left Angled) (2.170”OD) 1995-96 | 1 |
| 618 | Part # 84618AB | Sun Gear, 4T40E Final Drive (34 Teeth, Right Angled) (2.170”OD) 1997-11 | — |
| 618 | Part # 84618B | Sun Gear, 125/125C Differential (30 Teeth) 1980-Up | 1 |
| 618 | Part # 84618C | Sun Gear, 4T40E Final Drive (38 Teeth, Left Angled) (2.410”OD) 1995-96 | — |
| 618 | Part # 84618CA | Sun Gear, 4T40E Final Drive (38 Teeth, Right Angled) (2.410”OD) 1997-11 | — |
| 618 | Part # 84618D | Sun Gear, 4T60E Final Drive (42 Teeth, Left Angled, 2.615”OD) 1995-96 | — |
| 618 | Part # 84618DA | Sun Gear, 4T60E/4T65E Final Drive (42 Teeth, Right Angled, 2.615”OD) 1997-Up | — |
| 624 | Part # 84624 | Shell, 440-T4/4T60E Reverse Reaction 1983-97 | 1 |
| 624 | Part # 84624B | Shell, 4T65E Reverse Reaction (1st Design) 1997-Up | 1 |
| 624 | Part # 84624GA | Shell, 4T65E Reverse Reaction (2nd Design) 1997-Up | — |
| 646 not on diagram | Part # 84646 | Sprag Assembly, 440-T4 3rd Clutch 1983-86 | 1 |
| 646 not on diagram | Part # 84646A | Sprag Assembly, 440-T4/4T60E 3rd Clutch 1987-93 | 1 |
| 646 not on diagram | Part # 84646CK | Sprag Assembly, 4T60E/4T65E 3rd Clutch & Low Input (1 Piece) L1993-Up | 1 |
| 646 not on diagram | Part # 84646D | Sprag Assembly, 4T65E 3rd Clutch (Mechanical Diode) 2003-Up | — |
| 648 not on diagram | Part # 84648 | Sprag Assembly, 440-T4 Low Input 1983-E86 | 1 |
| 648 not on diagram | Part # 84648A | Sprag Assembly, 440-T4/4T60E Low Input L1886-E93 | 1 |
| 648 not on diagram | Part # 84648D | Sprag Assembly, 4T65E Low Input (Mechanical Diode) 2003-Up (Does Not Use #84619B) | — |
| 652 | Part # 84652 | Sprag, 4T60E 1-2 Roller (16 Rollers) 1991-95 (Use 44654) | 1 |
| 652 | Part # 84652A | Sprag, 4T60E/4T65E 1-2 Roller (14 Roller, Plastic Cage) 1996-Up | — |
| 656 | Part # 84656 | Sprag, 440-T4/4T60E 3rd Clutch 1983-E93 | 1 |
| 656 | Part # 84656B | Sprag, 4T60E/4T65E 3rd Clutch L1993-Up (Use 84658B) | — |
| 658 | Part # 84658 | Sprag, 440-T4 Low Input 1983-E86 | 1 |
| 658 | Part # 84658A | Sprag, 440-T4/4T60E Low Input L1986-E93 | 1 |
| 658 | Part # 84658B | Sprag, 4T60E Low Input & 3rd Clutch L1993-95 | 1 |
| 658 | Part # 84658C | Sprag, 4T60E/4T65E Low Input & 3rd Clutch 1996-Up | 1 |
| 666 not on diagram | Part # 84666 | Cam, 440-T4 3rd Clutch Sprag 1983-86 | — |
| 673 | Part # 64673A | Turbine Shaft, 440-T4 1983-91 | 1 |
| 673 | Part # 84673A | Turbine Shaft, 4T60E (6” Long) 1991-Up | 1 |
| 673 | Part # 84673G | Turbine Shaft, 4T65E (6 1/4” Long) 1994-Up | 1 |
| 674 | Part # 84674 | Shaft, 440-T4 Final Drive Sun Gear (4 1/2” Long) 1983-85 | 1 |
| 674 | Part # 84674A | Shaft, 440-T4 Final Drive Sun Gear (4 1/2” Long) 1986-91 | 1 |
| 674 | Part # 84674B | Shaft, 4T60E/4T65E Final Drive Sun Gear (6 1/4” Long) 1991-Up | 1 |
| 678 | Part # 84678 | Output Shaft, 440-T4 (Uses a Bushing in Center) 1983 | 1 |
| 678 | Part # 84678A | Output Shaft, 440-T4 (Uses a 1 3/4” Long # 241 Bearing) 1984-E85 | 1 |
| 678 | Part # 84678B | Output Shaft, 440-T4 (Uses a 1 3/4” Long # 241 Bearing)(18” Long) L1985-91 | 1 |
| 678 | Part # 84678BA | Output Shaft, 440-T4 (Uses a 1 3/4” Long # 241 Bearing)(19 11/16” Long) L1985-91 | — |
| 678 | Part # 84678C | Output Shaft, 4T60E (Uses a 3/4” Long # 241 Bearing)(17 3/4” Long) 1991-E93 | 1 |
| 678 | Part # 84678D | Output Shaft, 4T60E (Uses a 3/4” Long # 241 Bearing)(19 1/2” Long) 1991-E93 | 1 |
| 678 | Part # 84678E | Output Shaft, 4T60E (Has No Bearing)(19 1/2” Long) L1993-95 | 1 |
| 678 | Part # 84678G | Output Shaft, 4T60E/4T65E (Has a Bearing Under 4th Clutch Hub)(19 1/2” Long) 1996-Up | — |
| 678 | Part # 84678H | Output Shaft, 4T65E (Has No Bearing)(19 3/4” Long) 1997-Up (1.800” Spline Length) | — |
| 678 | Part # 84678HA | Output Shaft, 4T65E (Volvo) (19 5/8” Long) (1.630” Spline Length) (With Long Wide Band 4” From End Of Shaft) 1999-Up | — |
| 683 | Part # 64683A | Gear, 125/125C Governor Drive 1980-Up | 1 |
| 686 | Part # 84686 | Cover, 440-T4 Governor/Speed-O Housing 1983-87 | 1 |
| 686 | Part # 84686A | Cover, 440-T4 Governor/Speed-O Housing 1988-90 | 1 |
| 686 | Part # 84686C | Cover, 440-T4 Governor/Speed-O Housing (Electronic) 1991-Up | 1 |
| 690 | Part # 84690 | Gear, 440-T4/4T60E/4T65E Parking (2WD)(.953” Thick)(Uses Bearing # 84254G .155” Thick) (Bearing Pocket Is .090” Deep)… | 1 |
| 690 | Part # 84690G | Gear, 4T65E Parking (AWD)(.868” Thick) 1997-Up | — |
| 700 | Part # 84700A | Chain, 125C Drive (Wide)(Round Pins) 1984-Up | 1 |
| 700 | Part # 84700B | Chain, 4T60E (W/D Style Pins)(Can Use 84700C) 1991-Up | 1 |
| 700 | Part # 84700C | Chain, 4T45E (7/8” Wide)(Mouse Ear Links) 1999-11 | 1 |
| 700 | Part # 84700G | Chain, 4T65E (W/Mouse Ear Link & D Style Pins)(1/2” Wide)(2 Per Pack) 1997-04 | — |
| 700 | Part # 84700GB | Chain, 4T65E (W/Mouse Ear Link & D Style Pins)(1/2” Wide)(Heavy Duty) 2005-Up (Contains 2 Chains)… | — |
| 700 | Part # 84700L | Chain, 440-T4 (Allante) 1989-Up | 1 |
| 705 | Part # 84705A | Sprocket, 440-T4/4T60E Drive (33 Tooth, 3.756”OD) 1983-92 | 1 |
| 705 | Part # 84705B | Sprocket, 4T60E Drive (33 Tooth, 3.700”OD) 1993-Up | 1 |
| 705 | Part # 84705C | Sprocket, 440-T4/4T60E Drive (37 Tooth, 4.233”OD) 1983-92 | 1 |
| 705 | Part # 84705D | Sprocket, 4T60E Drive (37 Tooth, 4.181”OD) 1993-Up | 1 |
| 705 | Part # 84705E | Sprocket, 440-T4/4T60E Drive (38 Tooth) 1983-92 | — |
| 705 | Part # 84705F | Sprocket, 440-T4/4T60E Drive (35 Tooth) 1983-92 | 1 |
| 705 | Part # 84705FA | Sprocket, 4T60E Drive (35 Tooth) 1993-Up | — |
| 705 | Part # 84705G | Sprocket, 4T65E Drive (33 Tooth, Dual Chain Type)(Uses Washer # 279 W/3 Round Solid Tabs) 1997-00 | — |
| 705 | Part # 84705GA | Sprocket, 4T65E Drive (33 Tooth, Dual Chain Type)(Uses Washer # 279 W/3 Round Split Tabs, That Locks To Sprocket)… | — |
| 705 | Part # 84705GB | Sprocket, 4T65E Drive (37 Tooth, Dual Chain Type) 1997-Up | — |
| 705 | Part # 84705H | Sprocket, 4T65E Drive (35 Teeth Dual Chain Type)(Uses Washer # 279 W/3 Round Solid Tabs) 1997-00 | — |
| 705 | Part # 84705HA | Sprocket, 4T65E Drive (35 Tooth, Dual Chain Type)(Uses Washer # 279 W/3 Round Split Tabs, That Locks To Sprocket)… | — |
| 705 | Part # 84705J | Sprocket, 4T65E Drive (37 Teeth Dual Chain Type) 1997-00 (Uses Washer # 84279G With 3 Round Solid Tabs) | — |
| 705 | Part # 84705JA | Sprocket, 4T65E Drive (37 Teeth Dual Chain Type) 2001-Up… | — |
| 705 | Part # 84705L | Sprocket, 440-T4 Drive (Allante) 1989-Up | 1 |
| 706 | Part # 84706A | Sprocket, 440-T4/4T60E Driven (37 Tooth, 4.233”OD) 1983-92 | 1 |
| 706 | Part # 84706B | Sprocket, 4T60E Driven (37 Tooth, 4.181”OD) 1993-Up | 1 |
| 706 | Part # 84706C | Sprocket, 440-T4/4T60E Driven (33 Tooth, 3.756”OD) 1983-92 | 1 |
| 706 | Part # 84706CA | Sprocket, 4T60E Driven (33 Tooth, 3.700”OD) 1993-Up | 1 |
| 706 | Part # 84706D | Sprocket, 440-T4/4T60E Driven (32 Tooth) 1983-92 | — |
| 706 | Part # 84706F | Sprocket, 440-T4/4T60E Driven (35 Tooth) 1983-92 | 1 |
| 706 | Part # 84706FA | Sprocket, 4T60E Driven (35 Tooth) 1993-Up | — |
| 706 | Part # 84706GA | Sprocket, 4T65E Driven (37 Tooth, Dual Chain Type) 2001-Up | — |
| 706 | Part # 84706H | Sprocket, 4T65E Driven (35 Teeth Dual Chain Type) 1997-00 | — |
| 706 | Part # 84706J | Sprocket, 4T65E Driven (33 Teeth Dual Chain Type) 1997-Up | — |
| 706 | Part # 84706L | Sprocket, 440-T4 Driven (Allante) 1989-Up | 1 |
| 713 | Part # 84713 | Support, 440-T4 Driven Sprocket (1st Design) 1983-85 | 1 |
| 713 | Part # 84713A | Support, 440-T4 Driven Sprocket (2nd Design)(Scoupe Type) 1986-90 | 1 |
| 713 | Part # 84713B | Support, 440-T4/4T60E Driven Sprocket (3rd Design) 1991-Up | 1 |
| 713 | Part # 84713C | Support, 4T60E Driven Sprocket 1992-Up | 1 |
| 713 | Part # 84713G | Support, 4T65E Driven Sprocket (Uses a .125” Wide Ring W/Expander) 1997-E98 | — |
| 713 | Part # 84713GA | Support, 4T65E Driven Sprocket (Uses a .100” Wide Ring W/No Expander) (Cast # 24203724) L1998-02 | 1 |
| 713 | Part # 84713GB | Support, 4T65E Driven Sprocket (Cast # 24219592) 2003-Up | 1 |
| 713 | Part # 84713L | Support, 440-T4 Driven Sprocket (Allante) 1989-Up | 1 |
| 715 not on diagram | Part # 84715ABK | Diff. Assy, 440-T4 (W/2.660”OD 38 Tooth Right Angle Sun Gear) .760”OD Pin 1983-90 | — |
| 715 not on diagram | Part # 84715ACK | Diff. Assy, 440-T4/4T60E (W/2.660”OD 38 Tooth Right Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715ADK | Diff. Assy, 440-T4/4T60E (W/2.660”OD 38 Tooth Right Angle Sun Gear) .705”OD Pin (29 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715AEK | Diff. Assy, 440-T4/4T60E (W/2.660”OD 38 Tooth Right Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715AGK | Diff. Assy, 4T60E (W/2.410”OD 38 Tooth Left Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1995-96 | — |
| 715 not on diagram | Part # 84715AHK | Diff. Assy, 4T60E (W/2.410”OD 38 Tooth Left Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1995-96 | — |
| 715 not on diagram | Part # 84715AK | Diff. Assy, 440-T4 (W/2.660”OD 38 Tooth Right Angle Sun Gear) .705”OD Pin 1983-90 | — |
| 715 not on diagram | Part # 84715ALK | Diff. Assy, 4T60E/4T65E (W/2.410”OD 38 Tooth Right Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1997-Up | — |
| 715 not on diagram | Part # 84715AMK | Diff. Assy, 4T60E/4T65E (W/2.410”OD 38 Tooth Right Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1997-Up | — |
| 715 not on diagram | Part # 84715BAK | Diff. Assy, 440-T4 (W/2.380”OD 34 Tooth Right Angle Sun Gear) .760”OD Pin 1983-90 | — |
| 715 not on diagram | Part # 84715BBK | Diff. Assy, 440-T4/4T60E (W/2.380”OD 34 Tooth Right Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715BCK | Diff. Assy, 440-T4/4T60E (W/2.380”OD 34 Tooth Right Angle Sun Gear) .705”OD Pin (29 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715BDK | Diff. Assy, 440-T4/4T60E (W/2.380”OD 34 Tooth Right Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715BEK | Diff. Assy, 4T60E (W/2.170”OD 34 Tooth Left Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1995-96 | — |
| 715 not on diagram | Part # 84715BFK | Diff. Assy, 4T60E (W/2.170”OD 34 Tooth Left Angle Sun Gear) .705”OD Pin (29 Tooth Pick-Up) W/Ring Gear 1995-96 | — |
| 715 not on diagram | Part # 84715BGK | Diff. Assy, 4T60E (W/2.170”OD 34 Tooth Left Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1995-96 | — |
| 715 not on diagram | Part # 84715BHK | Diff. Assy, 4T60E/4T65E (W/2.170”OD 34 Tooth Right Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1997-Up | — |
| 715 not on diagram | Part # 84715BJK | Diff. Assy, 4T60E/4T65E (W/2.170”OD 34 Tooth Right Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1997-Up | — |
| 715 not on diagram | Part # 84715BK | Diff. Assy, 440-T4 (W/2.380”OD 34 Tooth Right Angle Sun Gear) .705”OD Pin 1983-90 | — |
| 715 not on diagram | Part # 84715BLK | Diff. Assy, 4T60E/4T65E (W/2.170”OD 34 Tooth Right Angle Sun Gear) .805”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1997-Up… | — |
| 715 not on diagram | Part # 84715BMK | Diff. Assy, 4T60E/4T65E (W/2.170”OD 34 Tooth, Right Angle Sun Gear) .805”OD Pin (30 Teeth Pick-Up) W/Ring Gear 1997-Up… | — |
| 715 not on diagram | Part # 84715BNK | Differential Assembly, 4T60E/4T65E (With 2.170”OD, 34 Teeth Right Angle Sun Gear) .784”OD Pin (30 Teeth Pick-Up) W/Ring… | — |
| 715 not on diagram | Part # 84715CAK | Diff. Assy, 440-T4 (W/2.130”OD 30 Tooth Right Angle Sun Gear) .760”OD Pin 1983-90 | — |
| 715 not on diagram | Part # 84715CDK | Diff. Assy, 440-T4/4T60E (W/2.130”OD 30 Tooth Right Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715CEK | Diff. Assy, 440-T4/4T60E (W/2.130”OD 30 Tooth Right Angle Sun Gear) .705”OD Pin (29 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715CGK | Diff. Assy, 440-T4/4T60E (W/2.130”OD 30 Tooth Right Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1991-94 | — |
| 715 not on diagram | Part # 84715CK | Diff. Assy, 440-T4 (W/2.130”OD 30 Tooth Right Angle Sun Gear) .705”OD Pin 1983-90 | — |
| 715 not on diagram | Part # 84715DAK | Diff. Assy, 4T60E (W/2.615”OD 42 Tooth Left Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1995-961 | — |
| 715 not on diagram | Part # 84715DBK | Diff. Assy, 4T60E (W/2.615”OD 42 Tooth Left Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1995-96 | — |
| 715 not on diagram | Part # 84715DDK | Diff. Assy, 4T60E/4T65E (W/2.615”OD 42 Tooth Right Angle Sun Gear) .705”OD Pin (31 Tooth Pick-Up) W/Ring Gear 1997-Up | — |
| 715 not on diagram | Part # 84715DEK | Diff. Assy, 4T60E/4T65E (W/2.615”OD 42 Tooth Right Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1997-Up | — |
| 715 not on diagram | Part # 84715DFK | Diff. Assy, 4T60E/4T65E (W/2.615”OD 42 Teeth Right Angle Sun Gear) .760”OD Pin (30 Teeth Pick-Up) W/Ring Gear 1997-Up | — |
| 746 | Part # 84746 | Plate, 440-T4 Accumulator Cover to Case 1983-91 | 1 |
| 746 | Part # 84746A | Plate, 4T60E Accumulator Cover to Case 1991-Up | 1 |
| 746 | Part # 84746G | Plate, 4T65E Accumulator Cover to Case 1997-Up | — |
| 760 | Part # 84760 | Case, 440-T4 1983-E85 | — |
| 760 | Part # 84760A | Case, 440-T4 (W/2 Round Threaded Bosses on Top of Case) L1985-91 | 1 |
| 760 | Part # 84760AA | Case, 440-T4 (W/Out Round Bosses on Top of Case) 1991-92 | — |
| 760 | Part # 84760B | Case, 440-T4 (W/Out Round Bosses on Top of Case) L1985-91 | — |
| 760 | Part # 84760C | Case, 4T60E Square Top (W/2 Round Threaded Bosses on Top of Case)(Uses 8mm Pan Bolt Heads) 1991-Up | — |
| 760 | Part # 84760CB | Case, 4T60E Round Top (Quad 4) 1991-Up | — |
| 760 | Part # 84760D | Case, 4T65E (Cast # 24204411 or 24208026) 1997-Up… | 2 |
| 760 | Part # 84760DA | Case, 4T65E (Cast # 24209508) (Has Cooler Line Fittings Under Bell With No Check Ball) 1997-Up | 1 |
| 760 | Part # 84760DAA | Case, 4T65E (Cast # 24209508) (Has Cooler Line Fittings Under Bell With Check Ball) 1997-Up | 1 |
| 760 | Part # 84760DB | Case, 4T65E (Cast # 24208026) (Has Cooler Line Fittings Under Bell With Check Ball) 1997-Up | 1 |
| 760 | Part # 84760DC | Case, 4T65E (Cast # 24226969) 1997-Up (Has Cooler Line Fittings Under Bell With No Check Ball) | 2 |
| 760 | Part # 84760E | Case, 4T65E (Cast # 24208834) (Quad 4) 1997-Up | 1 |
| 760 | Part # 84760F | Case, 4T65E (Volvo) (Top Bolts Are 4 7/8”) (Starter At 2:00) 1997-Up | — |
| 770 | Part # 84770 | Extension Housing, 4T60E/4T65E (Bushing Type) 1991-Up | 1 |
| 770 | Part # 84770G | Extension Housing, 4T60E/4T65E (Bearing Type)(1 1/2”ID Of Bearing) 1996-Up | — |
| 770 | Part # 84770GA | Extension Housing, 4T60E/4T65E (Bearing Type)(5 1/4” Long)(2 1/2”ID Of Bearing)1996-Up | — |
| 774 | Part # 64774 | Housing, 125/125C Driven Speed-O Gear (1” Aluminum Bullitt) 1980-Up | 1 |
| 847 | Part # 64847 | Gear, 125/125C Speed-O Drive (10 Teeth)(Green) 1980-Up | — |
| 848 | Part # 64848D | Gear, 125/125C Speed-O Driven (27 Teeth) (Black) | — |
| 848 | Part # 64848E | Gear, 125/125C Speed-O Driven (28 Teeth) (Yellow) | — |
| 904 | Part # 84904 | Housing, 4T60E/4T65E Manual 2-1 (Forward) 1991-Up | 1 |
| 904 | Part # 84904C | Cover, 4T60E/4T65E Manual 2-1 Servo (Forward) 1991-Up | — |
| 909 | Part # 84909 | Cover, 440-T4 1-2 & Reverse Servo 1983-91 | 1 |
| 909 | Part # 84909B | Cover, 4T60E 1-2 Servo (3 Bolt W/O-Ring Groove) 1991-Up | 1 |
| 909 | Part # 84909G | Cover, 4T65E 1-2 Servo (Lathe Cut Seal Type) 1997-Up | — |
| 914 | Part # 84914 | Cover, 440-T4 Reverse Servo (Use 84909) 1983-91 | 1 |
| 914 | Part # 84914A | Cover, 4T60E Reverse Servo (1 1/4” Overall Thickness) 1991-Up | — |
| 914 | Part # 84914G | Cover, 4T65E Reverse Servo (3/4” Overall Thickness) 1997-Up | — |
| 929 | Part # 84929 | Housing, 440-T4/4T60E 1-2 & 2-3 Accumulator (Cast # 8677163) 1983-Up | 2 |
| 929 | Part # 84929G | Housing, 4T65E 1-2 & 2-3 Accumulator (Cast # 24203536) 1997-Up | 1 |
| 934 | Part # 84934 | Cover, 440-T4 1-2 & 2-3 Accumulator (W/Tubes) 1983-90 | — |
| 934 | Part # 84934B | Cover, 4T60E 1-2 & 2-3 Accumulator (W/Tubes)(Cast # 8651533) 1991-Up | 2 |
| 934 | Part # 84934BK | Cover Assembly, 4T60E 1-2 & 2-3 Accumulator… | 1 |
| 934 | Part # 84934G | Cover, 4T65E 1-2 & 2-3 Accumulator (W/Tubes)(Cast # 24205584) 1997-Up | 1 |
| 934 | Part # 84934GK | Cover Assembly, 4T65E 1-2 & 2-3 Accumulator… | 1 |
| 985 | Part # 84985 | Housing, 440-T4 3rd Clutch 1983-88 | 1 |
| 985 | Part # 84985A | Housing, 440-T4/4T60E 3rd Clutch (For Bonded Piston)(No Check Valve) 1989-Up | 1 |
| 985 | Part # 84985G | Housing, 4T65E 3rd Clutch (W/Check Valve) 1997-Up | — |
| 991 | Part # 84991-4 | Manual Shaft, 440-T4 (Goes Thru Case)(3.570” Long) 1983-87 | — |
| 991 | Part # 84991B-4 | Manual Shaft, 440-T4 (Goes Thru Case)(3.830” Long) 1988-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 209 | Part # 84209G | Sleeve, 4T65E Pump Shaft (Presses Into The Valve Body) 1997-Up | — |
| 233 | Part # 84233A | Sleeve, 440-T4/4T60E Input Drum (Rear)(4 Notches) 1983-E93 | — |
| 275 | Part # T84275 | Axle Stabilizer, 440-T4/4T60E Driver Side (W/Bearing & Seal) 1983-Up (Teckpak) | — |
| 447 not on diagram | Part # 84447A | Shift Rite, 5 Terminal Round | — |
| 447 not on diagram | Part # 84447EC | Interceptor, 4T60E 1993-Up | — |
| 447 not on diagram | Part # 84447GC | Interceptor, 4T65E (Except 3.4L) 1997-Up | — |
| 476 not on diagram | Part # 84476G | Baffle, 4T65E AWD Transfer Case Adapter (Silencer Ring) (Rubber)(1/2” Thick)(5 1/4”OD) (3 Tabs With Round Hole Cutout) | — |
| 480 not on diagram | Part # 84480T | Capsule W/Spring & Check Valve, 440-T4 Under Servo Tube 1983-Up | 1 |
| 480 not on diagram | Part # 84480TS | Spring, 440-T4 Lube Tube 1983-Up | 1 |
| 483 not on diagram | Part # 84483A | Sleeve, 440-T4 Governor Shaft to Case 1983-Up | 1 |
| 485 not on diagram | Part # 84485A | Alignment Pin, 440-T4 Channel Plate to Case 1983-Up | 1 |
| 485 not on diagram | Part # 84485B | Alignment Pin, 440-T4 Valve Body to Channel Plate 1983-Up | 1 |
| 494 | Part # 84494 | Filler Tube, 440-T4 1984-Up | — |
| 507 not on diagram | Part # 84507PE | Sleeve, 440-T4/4T60E Pump Cover 1985-Up | 1 |
| 535 | Part # 84535 | Pin, 440-T4/4T60E/4T65E Pump Slide Pivot 1983-Up (Grooved)(Without Brass Air Bleed) | 1 |
| 535 | Part # S84535A | Pin, 440-T4/4T60E/4T65E Pump Slide Pivot (Solid)(With Brass Air Bleed)(Sonnax) | — |
| 536 | Part # 84536 | Spring, 440-T4/4T60E/4T65E Pump Slide (Outer) 1983-Up | 1 |
| 537 | Part # 84537 | Spring, 440-T4/4T60E/4T65E Pump Slide (Inner) 1983-Up | 1 |
| 693 not on diagram | Part # 84693 | Bracket, 440-T4 Holds Oil Scoop in 1983-91 | 1 |
| 697 | Part # 84697A | Oil Scoop, 440-T4/4T60E Bottom 1983-93 | 1 |
| 698 | Part # 84698 | Oil Dam, 440-T4/4T60E/4T65E Front Planet 1983-Up | 1 |
| 699 | Part # 84699 | Weir, 440-T4 Oil Reservoir 1983-91 | 1 |
| 699 | Part # 84699A | Weir, 4T60E/4T65E Oil Reservoir 1992-6/98 | 1 |
| 702 | Part # 84702 | Scoop, 440-T4 Chain Scavenging (1st Design)(For 35T Sprocket) 1983-E85 | 1 |
| 702 | Part # 84702A | Scoop, 440-T4 Chain Scavenging (1st Design)(For 33T Sprocket) 1983-E85 | 1 |
| 702 | Part # 84702B | Scoop, 440-T4/4T60E/4T65E Chain Scavenging(2nd Design)(For 33T Sprocket) L1985-Up | 1 |
| 702 | Part # 84702C | Scoop, 440-T4/4T60E/4T65E Chain Scavenging(2nd Design)(For 35T Sprocket) L1985-Up | 1 |
| 702 | Part # 84702D | Scoop, 440-T4/4T60E/4T65E Chain Scavenging(2nd Design)(For 37T Sprocket) L1985-Up | — |
| 741 not on diagram | Part # 84741C-2 | Lock-Up Sleeve, 440-T4/4T60E Input & 3rd Clutch 1983-Up | — |
| 741 not on diagram | Part # 84741C-3 | Spring, 440-T4 TCC Valve 1983-Up | 1 |
| 741 not on diagram | Part # 84741C-4 | Retainer, 440-T4 TCC Valve 1983-Up | 1 |
| 741 not on diagram | Part # 84741C-6 | Plug, 440-T4 TCC 1983-Up | 1 |
| 741 not on diagram | Part # 84741CE-3 | Spring, 4T60E Anti-Shutter 1991-Up | — |
| 741 not on diagram | Part # 84741E-4 | Retainer, 440-T4 1-2 Accumulator & 3-4 M.T.V. 1983-Up | 1 |
| 741 not on diagram | Part # 84741E-6 | Plug, 440-T4 Accumulator 1983-Up | 1 |
| 741 not on diagram | Part # 84741EA-4 | Retainer, 4T60E 1-2 Accumulator Primary Valve, Secondary, 2-4, & 3-4 1991-92 | 1 |
| 741 not on diagram | Part # 84741EB-4 | Retainer, 4T60E 1-2 Accumulator Primary Valve, Secondary, 2-4, & 3-4 1993-Up | 1 |
| 741 not on diagram | Part # 84741T-4 | Retainer, 440-T4 Boost Valve 1983-Up | 1 |
| 755 | Part # 84755S | Sleeve, 440-T4/4T60E (Presses in Channel Plate) 1983-Up | 1 |
| 755 | Part # 84755SE | Sleeve, 4T65E (Presses in Channel Plate) 1997-Up | — |
| 755 | Part # 84755V-4 | Retainer, 440-T4 3-2 Line Control Valve 1983-Up | 1 |
| 755 | Part # 84755VA-3 | Spring, 440-T4 3-2 Down Shift Valve 1983-Up | 1 |
| 755 | Part # 84755VA-4 | Retainer, 440-T4 3-2 Control Valve 1983-Up | 1 |
| 755 | Part # 84755VA-6 | Plug, 440-T4 3-2 Line Control Valve 1983-Up | 1 |
| 755 | Part # 84755VB-3 | Spring, 440-T4 3-2 Line Control Valve 1983-Up | 1 |
| 755 | Part # 84755VM-4 | Retainer, 440-T4 Manual Valve to Link 1983-Up | 1 |
| 775 not on diagram | Part # 64775 | Bolt, 125/125C Converter (Metric) 1980-Up | — |
| 780 not on diagram | Part # 84780A | Bolt, 440-T4 Channel Plate to Driven Sprocket Support (W/Oil Groove) 1983-Up | 1 |
| 843 | Part # 84843 | Bracket, 440-T4 Modulator 1983-91 | 1 |
| 843 | Part # 84843A | Clip, 440-T4 Internal Wire Harness 1983-91 | 1 |
| 862 | Part # 84862 | Snap Ring, 440-T4/4T60E Holds 4th Clutch Retainer (3 5/16”OD) 1983-Up | 1 |
| 862 | Part # 84862G | Snap Ring, 4T65E Holds 4th Clutch Retainer (3 9/16”OD) 1997-Up | — |
| 873 | Part # 84873 | Snap Ring, 440-T4 Holds 2nd Clutch Beveled Pressure Plate in 1983-86 | 1 |
| 873 | Part # 84873A | Snap Ring, 440-T4 Holds 2nd Clutch Beveled Pressure Plate in (W/Eye Ends) 1987-89 | — |
| 873 | Part # 84873B | Snap Ring, 440-T4/4T60E Holds 2nd Clutch Beveled Pressure Plate in (.060”) 1990-Up | 1 |
| 873 | Part # 84873G | Snap Ring, 4T65E Holds 2nd Clutch Beveled Pressure Plate in (.090”) 1997-Up | — |
| 874 | Part # 76874A | Snap Ring, 125/125C Holds Pinion Pins to Differential Housing (Spiral) 1980-Up | 1 |
| 874 | Part # 84874 | Snap Ring, 440-T4/4T60E Holds 2nd Clutch Retainer (5 5/8”OD) 1983-Up | 1 |
| 874 | Part # 84874G | Snap Ring, 4T65E Holds 2nd Clutch Retainer (3 1/4”OD) 1997-Up | — |
| 876 | Part # 84876 | Snap Ring, 440-T4/4T60E/4T65E Holds Input Clutch Pressure Plate in 1983-Up | 1 |
| 877 | Part # 84877 | Snap Ring, 440-T4/4T60E/4T65E Input Housing to 3rd Clutch Housing 1983-Up | 1 |
| 878 | Part # 84878 | Snap Ring, 440-T4/4T60E/4T65E Holds 3rd Clutch Pressure Plate in 1983-Up | 1 |
| 879 | Part # 84879 | Snap Ring, 440-T4/4T60E/4T65E Holds 3rd Clutch Pressure Retainer (Use 84877) | — |
| 880 | Part # 64880 | Snap Ring, 125/125C Holds Drive Sprocket to Turbine Shaft 1980-Up | 1 |
| 881 | Part # 84881 | Snap Ring, 440-T4/4T60E Holds Input Sprag in Outer Race 1983-E93 | 1 |
| 881 | Part # 84881A | Snap Ring, 4T60E/4T65E Holds Input Sprag in Outer Race (Spiral) L1993-Up | — |
| 884 not on diagram | Part # 84884 | Snap Ring, 4T60E Holds 1-2 Sprag in 1991-Up | 1 |
| 887 not on diagram | Part # 44887 | Snap Ring, 125/125C Holds Speed-O Seal in Speed-O Housing 1980-Up | — |
| 887 not on diagram | Part # 84887 | Snap Ring, 440-T4/4T60E/4T65E Holds Reverse & 1-2 Servo in 1983-Up | 1 |
| 888 | Part # 84888 | Snap Ring, 440-T4/4T60E/4T65E Holds Pinion Pins in Diff. Housing (Use 76874A) | — |
| 889 | Part # 84889 | Snap Ring, 440-T4/4T60E/4T65E Holds Differential Ring Gear to Case 1983-Up | 1 |
| 895 | Part # 14895A | Snap Ring, 4T40E Output Shaft(Long, Internal) 1995-11 | — |
| 895 | Part # 84895 | Snap Ring, 125/125C Output Shaft To Differential (Flat) 1983-Up | 1 |
| 896 | Part # 84896 | Snap Ring, 440-T4/4T60E/4T65E Holds Reverse & 1-2 Servo In 1983-Up | — |
| 897 | Part # 84897P | Snap Ring Clip, 440-T4/4T60E Holds Servo Pin to Piston 1983-Up | 1 |
| 901 | Part # 84901 | Spring, 4T60E/4T65E Manual 2-1 (Forward) 1991-Up | 1 |
| 906 | Part # 84906B | Spring, 440-T4 1-2 Servo Cushion (1st Design)(Orange/Green)(Inner) 1985-91 | 1 |
| 906 | Part # 84906C | Spring, 440-T4 1-2 Servo Cushion (2nd Design)(Orange/Blue)(Inner) 1985-91 | 1 |
| 906 | Part # 84906D | Spring, 440-T4 1-2 Servo Cushion (Green)(Inner) 1985-91 | 1 |
| 906 | Part # 84906G | Spring, 4T65E 1-2 Servo Cushion (.215” Coil Diameter) 1997-Up | — |
| 908 | Part # 84908 | Pin, 440-T4 1-2 Servo 2.215” (1 Ring & 1 Wide Band) 1983-91 | 1 |
| 908 | Part # 84908A | Pin, 440-T4 1-2 Servo 2.255” (1 Ring) 1983-91 | 1 |
| 908 | Part # 84908B | Pin, 440-T4 1-2 Servo 2.295” (2 Ring) 1983-91 | 1 |
| 908 | Part # 84908C | Pin, 440-T4 1-2 Servo 2.335” (3 Ring) 1983-91 | 1 |
| 908 | Part # 84908D | Pin, 440-T4 1-2 Servo 2.375” (1 Wide Band) 1983-91 | 1 |
| 908 | Part # 84908E | Pin, 440-T4 1-2 Servo 2.415” (2 Ring & 1 Wide Band) 1983-91 | 1 |
| 908 | Part # 84908U | Pin, 440-T4 1-2 (Universal) 1983-91 | — |
| 908 | Part # T84908 | Pin, 440-T4 1-2 & Reverse Servo (Extendo)(Teckpak) 1983-91 | 1 |
| 911 | Part # 84911 | Spring, 440-T4/4T60E Reverse Servo (Large) 1983-95 | 1 |
| 911 | Part # 84911A | Spring, 4T60E/4T65E Reverse Servo (Large) 1996-Up | 1 |
| 911 | Part # 84911C | Spring, 440-T4/4T60E Reverse Servo (Small) 1983-95 | 1 |
| 913 | Part # 84913 | Pin, 440-T4 Reverse Servo Apply 2.790” (2 Wide Bands) 1983-Up | 1 |
| 913 | Part # 84913A | Pin, 440-T4 Reverse Servo Apply 2.835” (3 Grooves & 1 Wide Band) 1983-Up | 1 |
| 913 | Part # 84913B | Pin, 440-T4 Reverse Servo Apply 2.875” (2 Grooves & 1 Wide Band) 1983-Up | 1 |
| 913 | Part # 84913C | Pin, 440-T4 Reverse Servo Apply 2.915” (1 Groove & 1 Wide Band) 1983-Up | 1 |
| 913 | Part # 84913D | Pin, 440-T4 Reverse Servo Apply 2.955” (No Groove) 1983-Up | 1 |
| 913 | Part # 84913E | Pin, 440-T4 Reverse Servo Apply 2.995” (1 Groove) 1983-Up | 1 |
| 913 | Part # 84913EA | Pin, 440-T4 Reverse Servo Apply 3.040” (2 Groove) 1983-Up | 1 |
| 913 | Part # 84913G | Pin, 440-T4 Reverse Servo Apply 3.080” (3 Groove) 1983-Up | 1 |
| 913 | Part # 84913H | Pin, 440-T4 Reverse Servo Apply 3.120” (4 Groove) 1983-Up | 1 |
| 913 | Part # 84913U | Pin, 440-T4 Reverse Servo Apply (Universal) 1983-Up | — |
| 913 | Part # 84913W | Pin, 4T60E/4T65E Reverse Servo Apply 4.735” Long 1991-Up | — |
| 926 | Part # 84926 | Spring, 440-T4/4T60E 1-2 Accumulator (Green) 1983-Up | 1 |
| 926 | Part # 84926A | Spring, 440-T4 1-2 Accumulator (Pink/White) 1983-Up | 1 |
| 926 | Part # 84926B | Spring, 440-T4/4T60E 1-2 Accumulator (Orange) 1983-Up | 1 |
| 926 | Part # 84926C | Spring, 440-T4 1-2 Accumulator (Blue) 1983-Up | 1 |
| 926 | Part # 84926D | Spring, 440-T4 1-2 Accumulator (Red) 1983-Up | 1 |
| 926 | Part # 84926E | Spring, 440-T4 1-2 Accumulator (Outer)(Pink) 1991-Up | 1 |
| 928 | Part # 84928 | Pin, 440-T4/4T60E 1-2 & 2-3 Accumulator (.308”OD) 1983-Up | 1 |
| 928 | Part # 84928E | Pin, 4T65E 1-2 & 2-3 Accumulator (.235”OD) 1997-Up | — |
| 928 | Part # S84928X | Pin, 440-T4/4T60E 1-2 & 2-3 Accumulator (Oversized)(4 Per Pack)(Sonnax) 1983-Up | 1 |
| 931 | Part # 84931 | Spring, 440-T4/4T60E 2-3 Accumulator (Blue) 1983-Up | — |
| 934 | Part # 84934-1 | Tube, 440-T4 Governor Feed (Short) 1983-Up | 1 |
| 934 | Part # 84934-2 | Tube, 440-T4 Governor Feed (Long) 1983-Up | 1 |
| 936 | Part # 84936 | Spring, 440-T4 Input Accumulator (Outer, Orange) 1985-91 | 1 |
| 936 | Part # 84936B | Spring, 4T60E 3-4 Accumulator (Outer) 1991-Up | 1 |
| 936 | Part # 84936BG | Spring, 4T65E 3-4 Accumulator (Outer, Yellow) 1997-Up | — |
| 936 | Part # 84936C | Spring, 4T60E 3-4 Accumulator (Inner) 1991-Up | 1 |
| 936 | Part # 84936CG | Spring, 4T65E 3-4 Accumulator (Inner, Yellow) 1997-Up | — |
| 938 | Part # 84938 | Pin, 440-T4 Input Accumulator 1983-Up | — |
| 938 | Part # 84938E | Pin, 4T60E 3-4 Accumulator (1 3/4” Long) 1991-Up | 1 |
| 938 | Part # 84938G | Pin, 4T65E 3-4 Accumulator (1 5/8” Long) 1997-Up | — |
| 941 | Part # 84941 | Spring, 440-T4/4T60E TCC Accumulator 1983-Up | 1 |
| 943 | Part # 84943 | Pin, 440-T4/4T60E TCC Accumulator 1983-Up | 1 |
| 970 | Part # 84970 | Retainer W/Springs, 440-T4/4T60E 4th Clutch (3 3/8”OD) 1983-Up | 1 |
| 970 | Part # 84970G | Retainer W/Springs, 4T65E 4th Clutch (3 5/8”OD) 1997-Up | — |
| 972 | Part # 84972 | Retainer W/Springs, 440-T4 2nd Clutch 1983-86 | 1 |
| 972 | Part # 84972A | Retainer W/Springs, 440-T4 2nd Clutch 1987-91 | 1 |
| 972 | Part # 84972B | Retainer W/Springs, 4T60E 2nd Clutch (13/16” Tall) 1991-Up | 1 |
| 972 | Part # 84972G | Retainer W/Springs, 4T65E 2nd Clutch (1 7/16” Tall) 1997-Up | — |
| 974 | Part # 84974 | Retainer W/Springs, 440-T4/4T60E Input Clutch (W/16 Springs) 1983-Up | 1 |
| 974 | Part # 84974G | Retainer W/Springs, 4T65E Input Clutch (W/14 Springs) 1997-Up | — |
| 975 | Part # 84975 | Guide Retainer W/Springs, 440-T4/4T60E 3rd Clutch (W/12 Springs) 1983-Up | 1 |
| 975 | Part # 84975G | Guide Retainer W/Springs, 4T65E 3rd Clutch (W/18 Springs) 1997-Up | — |
| 989 not on diagram | Part # 84989 | Retainer, 440-T4 Input Sprag Clutch 1983-86 | 1 |
| 989 not on diagram | Part # 84989A | Retainer, 440-T4/4T60E Input Sprag Clutch 1987-93 | 1 |
| 991 | Part # 84991 | Linkage Assembly, 440-T4 Internal (13 1/4” Park Rod) (Does Not Include # 991-7) | — |
| 991 | Part # 84991A | Linkage Assembly, 440-T4/4T60E Internal (13 3/4” Park Rod) L1990-Up (Does Not Include # 991-7) | — |
| 991 | Part # 84991B | Linkage Assembly, 4T60E/4T65E Internal (15 1/2” Park Rod) 1991-E98 (Does Not Include # 991-7) | — |
| 991 | Part # 84991G | Linkage Assembly, 4T65E Internal (15 1/2” Park Rod) L1998-Up (Does Not Include # 991-7) | — |
| 993 not on diagram | Part # 84993 | Link Rod, 440-T4 (Rooster Comb to Manual Valve) 1983-Up | 1 |
| 993 not on diagram | Part # 84993A | Link Rod, 4T60E (Rooster Comb to Manual Valve) 1991-Up | — |
| 993 not on diagram | Part # 84993G | Link Rod, 4T65E (Rooster Comb to Manual Valve) 1997-Up | — |
| 994 | Part # 84994A | Park Rod, 440-T4 (13 1/4” Long, .365”OD of Tip) 1983-91 | 1 |
| 994 | Part # 84994AA | Park Rod, 440-T4/4T60E (13 3/4” Long, .440”OD of Tip) 1984-91 | — |
| 994 | Part # 84994B | Park Rod, 4T60E/4T65E (15 1/2” Long, .440”OD of Tip) 1991-Up | 1 |
| 996 not on diagram | Part # 84996 | Fitting, 440-T4 Cooler Line (Lower)(Short One)(Fits Small Line) 1983-91 | 1 |
| 996 not on diagram | Part # 84996A | Fitting, 440-T4 Cooler Line (Upper)(W/Check Ball)(Long One)(Fits Small Line) 1983-91 | — |
| 996 not on diagram | Part # 84996AA | Fitting, 4T60E Cooler Line (Upper)(W/Check Ball)(Long One)(Fits Large Line) 1991-Up | 1 |
| 996 not on diagram | Part # 84996AB | Fitting, 4T60E/4T65E Cooler Line (Upper)(No Check Ball)(Long One) 1991-Up | — |
| 996 not on diagram | Part # 84996AC | Fitting, 440-T4 Cooler Line (Lower)(No Check Ball)(Short One)(Fits Small Line) 1983-91 | — |
| 996 not on diagram | Part # 84996B | Fitting, 4T60E/4T65E Cooler Line (Lower)(No Check Ball)(Short One) 1991-Up | — |
| 997 | Part # 84997 | Lever & Bracket Assembly, 440-T4 Throttle 1983-91 | — |
| 997 | Part # 84997-7 | Link, 440-T4 Throttle Cable to Throttle Lever 1983-91 | 1 |
| 998 | Part # 84998 | Pipe, 440-T4 2-3 Manuever W/Plate 1987-91 | 1 |
| 998 | Part # 84998B | Pipe, 440-T4 2nd Clutch Signal (on Valve Body) | 1 |
| 999 | Part # 84999 | Tubes, 440-T4/4T60E/4T65E 1-2 Servo 1983-Up | — |
| 999 | Part # S84999-6 | Retainer, 4T60E/4T65E Differential Lube Tube (Sonnax) | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.