JF015E parts diagram
Transmission page:
Positions:
182 total, 147 on the diagram
Parts:
225 total, 18 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 323002AF | Overhaul Kit, RE0F11A(JF015E) 2010-Up (CVT FWD) Applications: Citroen/Mitsubishi/Nissan/ Samsung/Suzuki | — |
| 030 not on diagram | Part # 323030A | Bushing Kit, JF0115E (RE0F11A) 2010-Up | — |
| 420 not on diagram | Part # 323420AK | Solenoid Kit, REF011A (JF015E) All 4 New OE Solenoids (Taken Off New Units) | — |
| 529 | Part # 323529AK | Kit, RE0F11A (JF015E) Converter Reactor w/Input Shaft & Counter Drive Gear Assembly (31 Teeth On 800 Gear)… | — |
| 564 not on diagram | Part # 323564A | Piston Kit, RE0F11A (JF015E) Low Clutch 2013-16 | — |
| 565 not on diagram | Part # 323565A | Piston Kit, RE0F11A (JF015E) High Clutch 2013-16 | — |
| 566 not on diagram | Part # 323566A | Piston Kit, RE0F11A (JF015E) Rev Brake Clutch 2013-16 | — |
| 741 | Part # S323741ACK | Valve Kit, RE0F11A (JF015E) Torque Converter Lube Regulator (Oversized)(Valve & Plug)… | — |
| 741 | Part # S323741APK | Valve Kit, RE0F11A (JF015E) Primary Pulley Regulator (Oversized)(Valve & End Plug)… | — |
| 741 | Part # S323741BPK | Valve Kit, RE0F11A (JF015E) Secondary Pulley/Pressure Regulator (Oversized)(Valve & End Plug)… | — |
| 741 | Part # S323741CPK | Valve Kit, RE0F11A (JF015E) Solenoid Regulator (Oversized) (Valve & End Plug) (Requires T-F-33741F-TL Sold Seperately) | — |
| 776 not on diagram | Part # 323776AK | Bolt Set, RE0F11A(JF015E) Bell To Case (19 Pieces) 2013-16 (12mm Hex x 1.520”Long) 2013-16 | — |
| 778 | Part # 323778AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Pump Cover To Pump (10mm)(4 Pices) 2007-Up | — |
| 779 not on diagram | Part # 323779A | Bolt Set, RE0F11A (JF015E) Pan To Case (10mm Hex x .785” Long)(15 Pieces) 2013-16 | — |
| 780 | Part # 323780AK | Bolt Set, RE0F11A (JF015E) Converter Reactor To Case (4 Pieces)(12mm Hex x 1.400”Long) 2013-16 | — |
| 780 | Part # 323780BK | Bolt Set, RE0F11A (JF015E) Chain Guard To Pinion Plate (10mm Hex x .795” Long)(2 Pieces) 2013-16 | — |
| 781 not on diagram | Part # 323781AK | Bolt Set, RE0F11A (JF015E) Rear Cover To Case (12mm Hex x 1.40”Long)(11 Pieces) 2013-16 | — |
| 782 | Part # 323782AK | Bolt Set, RE0F11A (JF015E) Valve Body To Case (10mm Hex x 3.615” Long)(11 Pieces) (#7 On Head) 2013-16 | — |
| 786 not on diagram | Part # 323786AK | Bolt Set, RE0F11A (JF015E) Ring Gear To Differential Housing (8 Pieces) (15mm x 1.010”Long) 2013-16 | — |
| 787 not on diagram | Part # 323787AK | Bolt Set, RE0F11A (JF015E) Pinion Plate To Case (13mm x 1.450”Long)(6 Pieces) 2013-16 | — |
| 790 | Part # 323790AK | Bolt Set, Rear Cover To Primary Retainer (12mm Hex x 1.430” Long)(2 Pieces) 2013-16 | — |
| 960 | Part # 323960AK | Piston Kit, JF015E (RE0F11A) 2010-Up (Hi-Per Blue) | — |
| 965 | Part # 323965AK | Piston Set, RE0F11A Forward Clutch W/ Bonded Retainer 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 323529A | Converter Reactor, RE0F11A (JF015E)(4 Bolt Aluminum Housing) (2.725” Tall) (30 Splines) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 323421A | Solenoid, REF011A (JF015E) Line Pressure “A” (3.525”Long) (Cast # 13112 APNH) 2013-16 | 1 |
| 425 | Part # 323425A | Solenoid, RE0F11A (JF015E) Lock-Up (1.945”Long)(2 O-Rings) (Cast # 12Z08-3-M) 2013-16 | 1 |
| 427 | Part # 323427A | Solenoid, RE0F11A (JF015E) High Clutch & Reverse Brake “G” (3.525”Long) (Cast # 13112 APNH) 2013-16 | 1 |
| 430 | Part # 323430A | Solenoid, RE0F11A (JF015E) Low Brake “F” (3.520”Long) (Cast # 12Z14 APNL) 2013-16 | 1 |
| 435 | Part # 323435A | Solenoid, RE0F11A (JF015E) Primary Pressure “B” (3.525”Long) (Rear Of VB) (Cast # 13112 APNH) 2013-16 | 1 |
| 507 | Part # 323507-1A | Valve, RE0F10A (JF011E) (Nissan/Dodge) Pressure Regulator (In Pump)(1.655” Long) (.670”OD) 2007-Up | — |
| 507 | Part # S212507A-1 | Valve, RE0F10A (JF011E) Pump Flow Control Valve 2007-Up | — |
| 740 | Part # 323740A | Valve Body, RE0F11A (JF015E) (5 Solenoids)(2 Sensors) (11 Bolts To Case)(Cast # APX &APZ) (2013-14 Sentra)… | — |
| 740 | Part # 323740B | Valve Body, RE0F11A (5 Solenoids)(2 Sensors)(11 Bolts To Case)(Cast # 3JX)(20 Bolts Holds Together)(2012 Versa) | 1 |
| 740 | Part # 323740C | Valve Body, RE0F11A (JF015E) (2015-16 Sentra) (5 Solenoids)(2 Sensors)(11 Bolts To Case) | — |
| 741 | Part # 323741-1A | Manual Valve, RE0F11A (JF015E) (3.920”Long Aluminium)(.470”OD) (.515” Slot For Rooster Comb) 2013-16 | — |
| 991 | Part # 323991-3A | Rooster Comb,RE0F11A (JF015E) (5 Detents)(.475”ID Hole)(.755”Thick) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 323410A | Switch, RE0F11A (JF015E) PRNDL (8 Blade Rectangle Connector) (2 Bolts To Case) (31918-X420A) 2013-16 | — |
| 413 | Part # 323413A | Sensor, RE0F11A (JF015E) High Clutch Pressure (25psi) (1.030”Tall)(1/8”Thread-Brass Body) 2013-16 | — |
| 414 | Part # 323414A | Switch, RE0F11A (JF015E) Secondary Pulley Presure (3 Pin Connector On End)(.675”Long) 2013-16 | — |
| 436 | Part # 212436A | Sensor, RE0F09A/F09B ISS/OSS/ Primary Pulley (90 Degrees)(3 Pin Oval Connector) (2.220”Tall)… | — |
| 436 | Part # 323436A | Replaced by 212438A | — |
| 438 | Part # 212438A | Sensor, RE0F08A/F08B(JF009E) On Top Of Bell Housing (90 Degrees)(.665”OD O-Ring) (1.920”Long) 2009-Up… | — |
| 438 | Part # 323438A | Replaced by 212436A | — |
| 439 | Part # 323439A | Replaced by 212436A | — |
| 444 | Part # 323444A | Connector, Wire Harrness To Case (22 Pins On Each End) (2.240”Long)(Plastic) 2013-16 | — |
| 446 | Part # 323446A | Wire Harness, RE0F11A (JF015E) Internal (22 Pin White Connector (2 Green, 4 White, 2 Black, & 1 Ground) 2013-16 | — |
| 845 | Part # 323845A | Reluctor, RE0F11A (JF015E) Primary Pulley (30 Fingers) (1.785”ID)(.310”Tall)(Tin) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 323010A | Filter, RE0F11A (JF015E) (Metal Screen)(2 1/4”Tall Neck)(1.080”OD Neck)(Retangle Pick-Up) (3 Bolts) 2013-16 | — |
| 013 | Part # 323013A | Filter, RE0F10D (JF016E) Auxillary External Filter (1.435”OD)(2.560”Long)(Cartridge Type With Seal) 2013-Up | — |
| 765 | Part # 323765A | Pan, RE0F11A (JF015E) Bottom (15 Bolts W/ 2 5/8” Tall Fluid Check Tube)(8 Retangle Dimples) (2 Round For Magnets)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 323070A | Seal, RE0F11A(JF015E) Front (2.410”OD)(1.790”ID)(.270”Thick) (NOK XH0903G) 2013-16 | — |
| 072 | Part # 60072 | Seal, A24A / M24A / S24A / MDLA / M4TA / MP7A / SP7A / S4XA / A4RA / B4RA / BMXA Manual Shaft | 3 |
| 076 | Part # 323076A | Seal, RE0F11A(JF015E) Axle (2.210”OD)(1.550”ID) (NOK AH2365H) 2013-16… | — |
| 077 | Part # 323077A | Replaced by 323076A | — |
| 177 not on diagram | Part # 323177AT | Ring, RE0F11A (JF015E) Input Shaft To Converter (Teflon)(.845”OD)(.065”Thk) 2013-16 | — |
| 178 not on diagram | Part # 323178A | Ring, RE0F08A/F08B (JF009E) Secondary Pulley To Rear Cover (.660”OD)(.065”Thick)(Double Lap Joint) 2009-Up | — |
| 180 not on diagram | Part # 323180AT | Ring, RE0F11A (JF015E) Pinion (Front)(Teflon)(1.090”OD)(.065”Thick)(Takes 2) 2013-16 | — |
| 181 not on diagram | Part # 323181AT | Ring, RE0F11A (JF015E) Pinion (Rear)(Teflon)(1.605”OD)(.053”Thick)(Takes 2) 2013-16 | — |
| 183 | Part # 323183A | Ring, RE0F11A (JF015E) Secondary Piston (4.445”OD)(.105”Thick) 2013-16 | — |
| 186 | Part # 323186A | Ring, RE0F11A (JF015E) Primary Pulley Front Piston (4.410”OD)(.088”Thick)(Double Lap Joint)(.110”Wide) 2013-16 | — |
| 187 | Part # 323187A | Ring, RE0F11A (JF015E) Primary Rear (5.180”OD)(.090”Thick)(.110”Wide Double Lap Joint) 2013-16 | — |
| 300 | Part # 323300A | Gasket, RE0F11A (JF015E) Pan To Case (15 Holes Paper Bonded To Metal) 2013-16 | — |
| 310 | Part # 323310A | Seal, RE0F11A (JF015E)(Beaded) Pump To Case (.880”OD)(.540”ID)(.090”Thick) 2013-16 | — |
| 313 | Part # 323313A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Rear Pump To Body (Outer) 2007-Up | — |
| 314 | Part # 323314A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Rear Pump To Body (Inner) 2007-Up | — |
| 318 not on diagram | Part # 323318A | Seal, RE0F11A (JF015E) Bell To Case Pass Thru (Oval) 2013-16 | — |
| 326 | Part # 323326A | O-Ring, RE0F11A (JF015E) Auxiliary Filter Housing To Case (2”OD)(.080”Thick) 2013-16 | — |
| 328 | Part # 323328A | D-Ring, RE0F11A (JF015E) Primary Rear Inner (.095”Thick)(2.590”ID) 2013-16 | — |
| 330 | Part # 323330A | D-Ring, RE0F11A (JF015E) Piston Outer (7”OD)(.065”Thick) 2013-16 | — |
| 334 | Part # 323334A | D-Ring, RE0F11A (JF015E) Low Clutch Piston (Inner)(4.035”ID) (.070”Thick) 2013-16 | — |
| 335 | Part # 323335A | D-Ring, RE0F11A (JF015E) Low Clutch Piston (Outer)(5.425”OD) (.070”Thick) 2013-16 | — |
| 338 | Part # 323338A | D-Ring, RE0F11A (JF015E) Reverse Brake Piston (Inner)(5.400”ID) (.065”Thick) 2013-16 | — |
| 339 not on diagram | Part # 323339A | D-Ring, RE0F11A (JF015E) Reverse Brake Piston (Outer)(7”OD) (.065”Thick) 2013-16 | — |
| 344 not on diagram | Part # 323344A | Seal, RE0F11A (JF015E) Transfer (Rubber) Pinion Plate To Bell Housing (.120”Thick)(.630”OD) (.350”ID) 2013-16 | — |
| 347 | Part # 323347A | O-Ring, RE0F11A (JF015E) Case Connector To Case (1.300”OD) (.145”Thick) 2013-16 | — |
| 370 | Part # 323370A | O-Ring, RE0F11A (JF015E) Input B Speed In Rear Cover (.695”OD)(.080”Thick) 2013-16 (Also Fits Input A) | — |
| 371 | Part # 323371-1A | O-Ring, RE0F08A/F08B (JF009E) Dipstick To Tube (.570”OD)(.100”Thick) 2007-Up | — |
| 371 | Part # 323371A | O-Ring, RE0F10D (JF016E) Filler Tube (.740”OD)(.100”Thick) 2013-Up | — |
| 372 not on diagram | Part # 323372A | O-Ring, RE0F10D (JF016E) Primary & Secondary Pressure Sensor (.475”OD)(.080”Thick) 2013-Up | — |
| 376 not on diagram | Part # 323376A | O-Ring, RE0F11A (JF015E) Lock-Up Solenoid (.420”OD) (.080”Thick) 2013-16 | — |
| 376 not on diagram | Part # 323376B | O-Ring, RE0F11A (JF015E) Lock-Up Solenoid (.730”OD) (.080”Thick) 2013-16 | — |
| 378 | Part # 323378A | O-Ring, RE0F10D (JF016E) Cooler To Case (1.0580”OD)(.150”Thick) 2013-Up | — |
| 379 | Part # 323379A | O-Ring, RE0F10D (JF016E) Filter To Pump (1.125”OD)(.100”Thick) 2013-Up | — |
| 380 not on diagram | Part # 323380A | O-Ring, RE0F11A (JF015E) Input Shaft To Converter (.795”OD) (.065”Thick) 2013-16 | — |
| 383 not on diagram | Part # 323383A | Boot, RE0F11A (JF015E) Oil Tube To Pinion Plate (.635”Long)(.300”ID) 2013-16 | — |
| 387 | Part # 323387A | O-Ring, RE0F08A/F08B (JF009E) Partial Drain Plug To Case (.100”Thick) 2007-Up | — |
| 387 | Part # 323387B | Gasket, RE0F11A (JF015E) Drain Plug To Pan (Fiber)(.720”OD)(.500”ID)(.040”Thick) 2013-16 | — |
| 389 not on diagram | Part # 323389A | O-Ring, RE0F10D (JF016E) Rear Cover To Primary Bolts (.420”OD)(.065”Thick) 2013-Up | — |
| 391 not on diagram | Part # 323391A | O-Ring, RE0F11A (JF015E) Rear Cover Plugs (.620”OD) (.085”Thick) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 032 | Part # 323032A | Bushing, RE0F11A (JF015E) Input Shaft To Converter Reactor (.825”ID)(.950”OD) (No Grooves)(.615”Wide) 2013-16 | — |
| 035 | Part # 323035A | Bushing, RE0F11A (JF015E) Pump Drive Gear To Converter Reactor (2.070”ID)(2.230”OD) (.495”Wide)(W/Oil Pockets) 2013-16 | — |
| 036 not on diagram | Part # 323036A | Bushing, RE0F10A (JF011E)(Nissan/Dodge) Pump Cover Shaft & Shaft To Pump Body (.395”ID)(.475”OD)(.500”Wide) 2007-Up | — |
| 046 | Part # 323046A | Bushing, RE0F11A (JF015E) High Clutch Drum (1.490”ID)(.225”Wide)(1.595”OD)(2 Grooves) 2013-16 | — |
| 052 not on diagram | Part # 323052A | Bushing, RE0F11A (JF015E) Pinion (Rear)(.510”ID) (.625”OD)(.270”Wide) 2013-16 | — |
| 205 | Part # 323205-1A | Needle Brg W/Race, RE0F11A (JF015E) Race To Drive Sprocket (2.480”OD)(1.940”ID) (.110”Thick) 2013-16 | — |
| 205 | Part # 323205A | Race, RE0F11A(JF015E) Bell To Drive Sprocket (Front) (2.500”OD)(2.005”ID)(.070”Thick) 2013-16 | — |
| 211 not on diagram | Part # 323211A | Bearing W/Races, RE0F11A (JF015E) Convertor Reactor To Input Gear (1.940”OD) (1.240”ID(.165”Thick) 2013-16 | — |
| 212 | Part # 323212A | Shim, RE0F11A (JF015E) Convertor Reactor To Bearing (1.945”OD)(1.370”ID) (Selective) 2013-16 | — |
| 228 | Part # 323228A | Brg W/Races, RE0F11A (JF015E) High Drum To Pinion Plate (4.125”OD)(3.330”ID) (.140”Thick) 2013-16 | — |
| 229 | Part # 323229A | Ball Bearing, RE0F11A (JF015E) Secondary Pulley To Rear Cover (16 Balls)(4.135”OD)(2.757”ID) (NTN SC1469C530PX1)… | — |
| 230 | Part # 323230A | Shim, RE0F11A (JF015E) Secondary Pulley Bearing To Rear Cover (Selective)(4.115”OD) (3.780”ID) 2013-16 | — |
| 232 | Part # 323232A | Ball Bearing, RE0F11A (JF015E) Counterdrive Gear To Case (NSK Sealed)(1.535”OD)(.670”ID) (17TM0SU40AL) 2013-16 | — |
| 233 | Part # 323233A | Shim, RE0F11A (JF015E) Counter Drive Gear Bearing To Case (1.525”OD)(1.200”ID)(Selective) 2013-16 | — |
| 235 | Part # 323235A | Ball Bearing, RE0F11A (JF015E) Primary Pulley To Case (3.345”OD)(.508”Thick) (Cast # NTN7MX2-SX06003CM09PX1VL)(13… | 1 |
| 235 | Part # 323235B | Ball Bearing, RE0F11A (JF015E) Primary Pulley To Rear Cover (9 Balls)(3.345”OD) (.665”Thick)(Cast # H1204-2254… | 1 |
| 236 not on diagram | Part # 323236A | Shim, RE0F11A (JF015E) Primary Pulley To Rear Cover (2.920”ID)(3.325”OD) (Selective) 2013-16 | — |
| 238 | Part # 323238A | Bearing, RE0F11A (JF015E) Front Sungear To Rear Sungear (Split)(Plastic Cage)(.905”OD) (.520”Tall) 2013-16 | — |
| 239 | Part # 323239A | Bearing, RE0F11A (JF015E) Front Sungear To Rear Sungear (No Races)(1.302”OD) (.080”Thick) 2013-16 | — |
| 240 | Part # 323240A | Washer, RE0F11A (JF015E) Front Planet To Rear Sungear Hub (Plastic W/ 4 Round Tabs) (2.360”OD)(.070”Thick) 2013-16 | — |
| 241 | Part # 323241A | Brg W/Races, RE0F11A (JF015E) Front Planet Sungear Hub To Case (4.125”OD)(.140”Thick) (3.510”ID) 2013-16 | — |
| 247 | Part # 323247A | Washer, RE0F11A (JF015E) Front Planet Sungear To Pinion (Brass)(1.050”OD)(.530”ID) (.035”Thick) 2013-16 | — |
| 250 | Part # 323250A | Bearing W/Race, RE0F11A (JF015E) Front Planet To Drum (2.355”OD)(1.755”ID)(.155”Thick) 2013-16 | — |
| 251 | Part # 323251A | Race, RE0F11A (JF015E) Front Planet To Drum (2.395”OD) (1.755”ID)(.037”Thick)(3 Tabs) 2013-16 | — |
| 264 | Part # 323264A | Ball Brg, RE0F11A (JF015E) Secondary Pulley (10 Balls) (3.345”OD)(1.770”ID)(.587” Thick) (W/Snap Ring Groove) 2013-16 | — |
| 273 | Part # 323273A | Race, RE0F11A (JF015E) Pinion To Bell Housing (2.205”OD) (1.800”ID)(.430”Thick) (KOYO ST3256) 2013-16 | — |
| 273 | Part # 323273B | Race, RE0F11A (JF015E) Tapered Pinion To Pinion Plate (2.560”OD)(2.190”ID) (Koyo STC4065) 2013-16 | — |
| 274 | Part # 323274A | Bearing, RE0F11A (JF015E)(Tapered) Pinion To Bell Housing (1.180”ID)(23 Rollers) (KOYO ST 3256/1YD) 2013-16 | — |
| 274 | Part # 323274B | Bearing, RE0F11A (JF015E)(Tapered) Pinion To Pinion Plate (1.575”ID)(28 Rollers) (KOYO STC4065) 2013-16 | — |
| 277 | Part # 323277A | Shim, RE0F11A (JF015E) Pinion Bearing To Bell Housing (2.190”OD) (1.895”ID)(Selective) 2013-16 | — |
| 281 | Part # 323281A | Ball Bearing, RE0F10D (JF016E) Driven Sprocket (10 Balls)(.915”OD)(.475”ID)(.235”Thick) 2013-Up | — |
| 288 | Part # 323288A | Replaced by 323292A | — |
| 289 | Part # 323289A | Replaced by 323292A | — |
| 291 | Part # 323291A | Race, RE0F11A (JF015E) Bell Housing To Differential (2.675”OD) (2.250”ID)(.570”Thick) (NSK HR32008XJ) 2013-16… | — |
| 292 | Part # 323292A | Bearing, RE0F11A (JF015E) Bell Housing To Differential (Tapered) (1.570”ID)(22 Rollers) (NSK HR32008XJ.10) 2013-16… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 323500A | Pump, RE0F11A(JF015E) (4 Bolt Cover)(Cast # On Pump Body CF2Y17E1F7) 2013-16 | 1 |
| 510 | Part # 323510A | Pump Body, RE0F11A (JF015E) (3 Bolt)(Aluminum)(4 Bolt Cover) (Cast # CF2Y17E1F7) (1.100”ID Filter Neck Opening) 2013-16 | 1 |
| 519 | Part # 323519A | Pump Cover, RE0F11A (JF015E) (4 Bolt, (Aluminum)(1.330”Thick) (Cast # KYB) 2013-16 | — |
| 528 | Part # 323528A | Spacer Plate, RE0F10A (JF011E) (Nissan/Dodge) Pump (Rear) 2.180”OD)(.595”ID) (.363”Thick)… | — |
| 532 | Part # 323532A | Rotor, RE0F11A (JF015E) Pump (.630”Thick)(12 Slots) (18 Splines)(1.495”OD) 2013-16 | — |
| 533 | Part # 323533A | Vanes, RE0F10D (JF016E) Pump Rotor (.052”Thick)(.630”Long)(.315”Wide) 2013-Up | — |
| 534 | Part # 323534A | Slide, RE0F11A (JF015E) Pump (2.120”OD)(.630”Thick) (W/2 .130”ID Alignment Pin Holes) 2013-16 | — |
| 544 | Part # 323544A | Plate, RE0F11A (JF015E) Pump (Front)(.235”Thick)(2.120”OD) (.515”ID) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 106 | Part # 323106A | Friction, RE0F11A (JF015E) High Clutch (.063”Thick)(30 Teeth)(5.105”OD) 2013-16 | — |
| 108 | Part # 323108A | Friction, RE0F11A (JF015E) Low Brake (.075”Thick)(36 Teeth)(5.660”OD) 2013-16 | — |
| 110 | Part # 323110A | Friction, RE0F11A (JF015E) Rev Brake Clutch (.065”Thick)(32 Teeth)(6 1/2”OD) 2013-16 | — |
| 119 not on diagram | Part # 323119A | Fri Module, RE0F11A (JF015E)(CVT-7) 2010-14 | — |
| 126 | Part # 323126A | Steel, JF015E (RE0F11A) High Clutch (.076”Thick)(40 Teeth) (4.050”ID) 2010-Up (Takes 5) | 1 |
| 128 | Part # 323128A | Steel, RE0F11A (JF015E) Low Clutch (10 Teeth)(.053”Thick)(5.090”ID) 2013-16 (Takes 2) | — |
| 130 | Part # 323130A | Steel, RE0F11A (JF015E) Rev Brake Clutch (.075”Thick)(12 Teeth) (5.903”ID) 2013-16 (Takes 4) | — |
| 134 not on diagram | Part # 323134A | Steel, JF015E (RE0F11A) Low Clutch 2010-Up | 1 |
| 148 | Part # 323148A | Pressure Plate, RE0F11A (JF015E) Low Clu (Top)(10 Teeth)(.145”Thick)(5.090”ID) 2013-16 | — |
| 854 | Part # 323854A | Cushion, RE0F11A (JF015E) Reverse Brake Clutch (Beveled)(5 Teeth) (.085”Thick)(6.100”ID) 2013-16 | — |
| 960 | Part # 323960A | Piston, RE0F11A (JF015E) Secondary Pulley (Steel) (4.430”OD)(1.200”ID)(1.325”Tall) (.107”Wide Ring Groove) 2013-16 | — |
| 961 | Part # 323961A | Piston, RE0F11A (JF015E) Primary Rear (Steel)(.365”Tall) (5.190”OD)(2.595”ID) (.100”Wide Ring Groove) 2013-16 | — |
| 962 | Part # 323962A | Piston, RE0F11A (JF015E) Primary Pulley (Front)(Steel) (4.405”OD)(2.307”ID) (.097” Wide Ring Groove) 2013-16 | — |
| 962 | Part # 323962AHD | Piston, RE0F11A Primary Pulley(Front)(Billet) (TransGo) | — |
| 964 | Part # 323964A | Piston, RE0F11A (JF015E) Low Clutch (Aluminium)(18 Pockets) (5.360”OD)(4.050”ID) (.795”Tall)(18 Lugs)(31575 3XX0A)… | — |
| 965 | Part # 323965A | Piston, RE0F11A (JF015E) High Clutch (Bonded)(5.060”OD) (.530”Thick)(1.805”ID) 2013-16 | — |
| 966 | Part # 323966A | Piston, RE0F11A (JF015E) Reverse Brake (Aluminium)(5.420”ID) (6 15/16”OD) (Cast # 31645-3XX0A)(12 Spring Pockets)… | 1 |
| 975 | Part # 323975A | Spring & Retainer, RE0F11A (JF015E) High Clutch (22 Springs)(.770”Thick)(3.285”OD) 2013-16 | — |
| 976 | Part # 323976A | Spring & Retainer, RE0F11A (JF015E) Reverse Brake Clutch (12 Springs)(6 Slots)(7 1/8”OD) (.850”Tall) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 469 | Part # 323469A | ROM Assy, RE0F11A (JF015E) 5 Pin Connector (1.485”Long) (.965”Wide)(.380”Thk) 2013-16 | — |
| 525 | Part # 323525A | Chain, RE0F11A (JF015E) Pump Drive (30 Links)(.235”Wide) (.180” Wide W/Out Pins) 2013-16 | — |
| 526 | Part # 323526A | Sprocket, RE0F11A(JF015E) Pump Drive (37 Teeth)(2 Lugs For Convertor) (.785”Thick) (.860”OD) 2013-16 | — |
| 527 | Part # 323527A | Sprocket, RE0F11A (JF015E) Pump Driven (34 Teeth)(.495”Thick) (.110” Wide Teeth) (2.625”OD)(.470”OD Shaft)(14 Splines)… | — |
| 555 | Part # 323555A | Drum, RE0F11A (JF015E) High Clutch (4 Clutch)(40 Teeth)(5.600”OD) (2.070”Tall) (Stamped Steel) 2013-16 | — |
| 582 | Part # 323582A | Planet, RE0F11A (JF015E) Front W/ Sungear (6 Gears)(30 Teeth Clutch Hub)(21/21 Teeth Long Gear)… | — |
| 592 | Part # 323592A | Ring Gear, RE0F11A (JF015E) Front Planet (76 Teeth) (40 Lugs)(.627”Thick)(5.375”OD) 2013-16 | — |
| 612 | Part # 323612A | Sun Gear Hub, RE0F11A (JF015E) Front Planet (23 Teeth) (36 Clutch Teeth)(5.015”OD) (.910”ID) 2013-16 | — |
| 670 | Part # 323670A | Input Shaft, RE0F11A (JF015E) (5.365”Long)(18 Spline Each End)(.668”OD Pilot) 2013-16 | — |
| 671 | Part # 323671A | Shaft, RE0F11A (JF015E) Pump Drive (3.150” Long) (18/13 Splines On Ends)(.392”OD Pilot) 2013-16 | — |
| 690 | Part # 323690A | Park Gear, RE0F11A (JF015E) (10 Lugs)(34 Splines) (2.910”OD)(.428”Thick) 2013-16 | — |
| 700 | Part # 323700A | Belt, RE0F11A (JF015E) Nissan 2013-16 | — |
| 705 | Part # 323705A | Secondary Pulley Half, RE0F11A (JF015E)(Rear Half) (1.800”Thk)(5.650”OD)(3 ID Square Slots & 1 Round) 2013-16 | — |
| 706 | Part # 323706A | Primary Pulley Half, RE0F11A (JF015E) (7.040”Tall) (5.155”OD)(1.015”Threads Left Hand) (1.765”Threads Left Hand)… | — |
| 707 | Part # 323707A | Secondary Pulley Half, RE0F11A (JF015E)(Front Half) (4 3/8” Long)(5.415”OD)(20 ID Splines) (1.175”OD Threads) 2013-16 | — |
| 708 | Part # 323708-5A | Housing, RE0F11A (JF015E) Secondary Piston (Steel)(1.20”ID) (4.88”OD)(1.325”Tall) 2013-16 | — |
| 708 | Part # 323708A | Priamry Pulley Half, RE0F11A (JF015E) (5.495”OD) (1.810”/1.555”ID)(1.908”Tall) 2013-16 | — |
| 716 | Part # 323716A | Differential Housing, RE0F11A (JF015E) (Less Ring Gear)(8 Bolt) (1.575”OD Noses) (4.850”Tall) 2013-16 | — |
| 720 | Part # 323720A | Ring Gear, RE0F11A (JF015E) (66 Teeth)(8 Bolt)(8 3/4”OD) (1 Groove)(.915”Thick) 2013-16 | — |
| 730 | Part # 323730A | Pinion Shaft, RE0F11A (JF015E) (5.270”Long)(17 Teeth)(2.545”OD) (4 Ring Grooves) (34 Spline Park)(30 Spline On End)… | — |
| 750 | Part # 323750A | Bell Housing, RE0F11A(JF015E)(19 Bolts To Case)(9 3/8” Top Bolts)(2:30 Starter, Closed) (Cast # APF#2AXM) 2013-16 | 1 |
| 750 | Part # 323750B | Bell Housing, RE0F11A(JF015E)(19 Bolts To Case)(7 1/8”Top Bolts)(2:30 Starter, Closed) (Cast # APZ#1AMX) 2013-16 | 1 |
| 750 | Part # 323750C | Bell Housing, RE0F11A(JF015E)(19 Bolts To Case)(9 3/8” Top Bolts)(2:30 Starter, Closed) (Cast # FYD KH2#2) 2013-16 | 1 |
| 759 | Part # 323759A | Rear Cover, RE0F11A (JF015E) (Aluminium)(11 Bolts)(2 Sensors) (3 Mount Bosses) (Cast # APZ AMX)(2 Retainer Holes)… | — |
| 760 | Part # 323760A | Case, RE0F11A (JF015E)(Cast # APO)(19 Bolts To Case) (15 Pan Bolts)(X427A Stamped) (2.205”OD Axle Seal) 2013-16 | — |
| 761 | Part # 323761A | Plug Press Tap, RE0F11A (JF015E) Rear Cover (.545”OD) (19mm Hex x .695”Long) 2013-16 | — |
| 769 | Part # 323769A | Housing, RE0F11A (JF015E) Auxiliary Filter (1 Bolt Alum) (2.385”Tall)(1.720”ID)(Tapered) 2013-16 | — |
| 800 | Part # 323800A | Gear, RE0F11A (JF015E) Counter Drive (32 Teeth, Left Angle) (3 Grooves)(.845”Thick) (2.910”OD)(18 Splines) 2013-16 | — |
| 800 | Part # 323800B | Gear, RE0F11A (JF015E) Counter Drive (31 Teeth, Left Angle)(No Grooves)(.720”Thick) (2.815”OD)(18 Splines) 2013-16 | — |
| 801 | Part # 323801A | Gear, RE0F11A (JF015E) Counter Driven (29 Teeth 3 Grooves) (.825”Thick)(2.630”OD) (28 Splines) 2013-16 | — |
| 991 | Part # 323991-4A | Shaft, RE0F11A (JF015E) Linkage (14” Long)(.470”OD) 2013-16 | — |
| 995 not on diagram | Part # 323995AK | Park Pawl Assy, RE0F11A (JF015E) 2013-16 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 492 | Part # 323492A | Drain Plug, RE0F10A (JF011E) (Nissan/Dodge) Partial (10mm Allen Head)(1.095” / .860” Thick) (.750”Long) In Case Below… | — |
| 493 not on diagram | Part # 323493A | Dip Stick & Cap, RE0F11A (JF015E) Filler Tube (2.735”Long) (.530”OD At O-Ring) (Plastic Body & Metal Stick) 2013-16 | — |
| 494 | Part # 323494A | Filler Tube, RE0F11A (JF015E) (One Bolt 7” Long)(.550”OD) | — |
| 507 | Part # 323507-3A | Spring, RE0F10A (JF011E) (Nissan/Dodge) Pressure Regulator (In Pump)(1.645” Long) (.495”OD) 2007-Up | — |
| 507 | Part # 323507-6A | Plug, RE0F10D (JF016E) Pressure Regulator In Pump (.630”Thick)(1.100”OD)(.860”ID) (Right Hand Threads)(11mm Allen Head)… | — |
| 694 | Part # 323694A | Bearing Retainer, RE0F11A (JF015E) Primary Pulley To Rear Cover (2 Bolts)(5.125”Long) (3.455”Wide)(.055”/.285”Thick)… | — |
| 702 | Part # 323702A | Chain Guard, RE0F11A (JF015E) Pump (4 Bolt)(Tin) 2013-16 | — |
| 705 | Part # 323705-1A | Roller Guide, RE0F11A (JF015E) Fits Primary & Secondary Pulley (.235”OD)(.290”Long) 2013-16 | — |
| 705 | Part # 323705-2A | Plate Guide, RE0F11A (JF015E) Fits Primary & Secondary Pulley (.390”Wide x 1.515”Long) (Square Hole .275” x .300”)… | — |
| 735 | Part # 323735A | Plate, RE0F11A (JF015E) Pinion (6 Bolt Cast Iron)(2.265” Long)(Cast # 2Y24F & 12Y26 BD292) 2013-16 | 2 |
| 765 | Part # 323765-5A | Plug, RE0F11A (JF015E) Fluid Check Inner (5mm Allen) (2.195”Long) 2013-16 | — |
| 765 | Part # 323765-6A | Plug, RE0F11A (JF015E) Fluid Check Outer (19mm Hex x .660” Long) 2013-16 | — |
| 795 | Part # 323795A | Nut, RE0F11A (JF015E) Holds Priamry Pulley Gear To Pulley Shaft (.990”ID)(.540”Thick) (34mm)(Front) 2013-16 | — |
| 795 | Part # 323795B | Nut, RE0F11A (JF015E) Primary Pulley To Rear Cover (.280”Thick)(1”ID)(Left Hand 55mm) (6 points) 2013-16 | — |
| 797 | Part # 323797A | Nut, RE0F11A (JF015E) Holds Secondary Pulley Piston To Front Pulley Half (.270”Thick) (46mm Hex)(1.145”ID) 2013-16 | — |
| 799 | Part # 323799-1A | Nut, RE0F08A/F08B(JF009E) Holds Internal Lever To End Of Shaft (14mm Hex) (RH Threads) 2007-Up | — |
| 799 | Part # 323799A | Nut, RE0F10A (JF011E) (Nissan/Dodge) Holds External Linkage To Shaft (14mm Hex) (Right Hand Threads) 2007-Up | — |
| 870 not on diagram | Part # 323870A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Holds Ball Bearing To Pump Cover (.985”OD)(.022”Thick)(2 Ears) 2007-Up | — |
| 876 | Part # 323876A | Snap Ring, RE0F11A (JF015E) Holds Low Clutch Pressure Plate (Top) In Case (6.130”OD) (.082”thick)(.160”Wide) 2013-16 | — |
| 877 | Part # 323877A | Snap Ring, RE0F11A (JF015E) Holds Low Clutch Piston Retainer (6.080”OD)(.080”Thick) (.140”Wide) 2013-16 | — |
| 878 | Part # 323878A | Snap Ring, RE0F11A (JF015E) Holds High Clutch In Drum (.085”Thick)(5.485”OD)(.115”Wide) 2013-16 | — |
| 879 | Part # 323879A | Snap Ring, RE0F11A (JF015E) Holds High Clutch Piston Retainer (1.865”OD)(.037”Thick) 2013-16 | — |
| 882 | Part # 323882A | Snap Ring, RE0F11A (JF015E) Holds Front Planet Ring Gear To Drum (.075”Thick)(5.505”OD) (.195”Wide) 2013-16 | — |
| 897 not on diagram | Part # 323897A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Driven Sprocket To Bearing (2 Eyelets) (.560”OD)(.037”Thick) 2007-Up | — |
| 899 | Part # 323899A | Snap Ring, RE0F11A (JF015E) Secondary Pulley Bearing To Case (3.595”OD)(.060”Thick) 2013-16 | — |
| 957 | Part # 323957A | Retainer, RE0F11A (JF015E) Reverse Brake Piston (Tin) (5.255”ID)(7 1/8”OD) 2013-16 | — |
| 970 | Part # 323970-1A | Spring, RE0F11A (JF015E) Secondary Pulley Retrun (Inner) (2.870”OD)(2.940”Tall)(.215”OD Wire) 2013-16 | — |
| 970 | Part # 323970A | Spring, RE0F11A (JF015E) Secondary Piston Return (Outer) (3.4710”OD)(3.420”Tall) (.215”OD Wire) 2013-16 | — |
| 974 | Part # 323974A | Retainer, RE0F11A (JF015E) Low Clutch Piston (18 Springs) (5.720”OD)(4.250”ID)(.635”Tall) (18 Slots) 2013-16 | — |
| 985 | Part # 323985A | Retainer, RE0F11A (JF015E) High Clutch (Bonded)(22 Pockets) (4.705”OD)(1.755”ID) (.750”Tall) 2013-16 | — |
| 991 | Part # 323991-1A | Lever, RE0F10A (JF011E) (Nissan/Dodge) Internal Linkage (2.240” Long)(.125”Thick) 2007-Up | — |
| 991 | Part # 323991-2A | Detent Spring, RE0F10E/F10J Linkage 2013-Up | — |
| 991 | Part # 323991-5A | Pin, RE0F11A (JF015E) Holds Linkage Shaft In Case (1.395”Long)(.115”OD) 2013-16 | — |
| 991 | Part # 323991-6A | Pin, RE0F10A (JF011E) (Nissan/Dodge) Holds Rooster Comb To Shaft (1” Long)(.160”OD) 2007-Up | — |
| 992 | Part # 323992A | Shift Lever, RE0F11A (JF015E) (External)(1.200”Tall) (.155”Thick) 2013-16 | — |
| 994 | Part # 323994A | Park Rod, RE0F11A (JF015E) (7 5/16” Long)(.855”OD Ball) 2013-16 | — |
| 998 | Part # 323998A | Heat Exchanger, RE0F11A (JF015E) External (Square W/2 Tubes) (With O-Rings)(Fits Nissan Sentra (1.8L) 2013-18 | — |
| 998 | Part # 323998B | Heat Exchanger, RE0F11A (JF015E) External (Square W/4 Tubes) (W/O-Rings)(Fits Nissan Sentra (1.8L) 2013-18 & Versa… | — |
| 999 | Part # 323999-1A | Oiler Tube, RE0F11A (JF015E) In Case For Belt (1 Bolt Flange S Shaped Tube)(.187”OD) 2013-16 | — |
| 999 | Part # 323999-2A | Oil Deflector, RE0F11A (JF015E) In Case For Primary Gear (Front)(2 Tin Bolts) 2013-16 | — |
| 999 | Part # 323999-6A | Oil Tube, RE0F11A (JF015E) In Bell Housing Under Differential (8 3/4” Long)(.310”OD) (Brackets On Each End) 2013-16 | — |
| 999 | Part # 323999-7A | Oil Tube, RE0F11A (JF015E) Pinion Plate To Case (8 3/4” Long)(.310”OD)(2 One Bolt Brackets On Each End) 2013-16 | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.