FW6A-EL parts diagram
Transmission page:
Positions:
136 total, 119 on the diagram
Parts:
232 total, 179 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 238002AF | Overhaul Kit, FW6A-EL (Mazda 6 Speed)(With Duraprene Pan Gasket) 2011-Up (For Bonded Pistons Order A238960AK… | — |
| 004 not on diagram | Part # 238004A | Master L/Steels Kit, FW6A-EL 2012-Up | — |
| 004 not on diagram | Part # 238004AP | Master L/Steels Kit, FW6A-EL (Mazda 6 Spd) 2011-Up (W/Duraprene Pan Gasket) (Includes Pistons) | — |
| 006 not on diagram | Part # 238006A | Master W/Steels Kit, FW6A-EL 2012-Up | — |
| 006 not on diagram | Part # 238006AP | Master W/Steels Kit, FW6A-EL (Mazda 6 Spd) 2011-Up (W/Duraprene Pan Gasket) (Includes Pistons) | — |
| 560 not on diagram | Part # 238560A | Piston Kit, FW6A-EL 2-6 Clutch (Bonded Piston) 2012-Up | — |
| 564 not on diagram | Part # 238564A | Piston Kit, FW6A-EL Low Clutch (Bonded Piston & Retainer) 2012-Up | — |
| 565 not on diagram | Part # 238565A | Piston Kit, FW6A-EL 3-5/Reverse Clutch (Bonded Piston) 2012-Up | — |
| 567 not on diagram | Part # 238567A | Piston Kit, FW6A-EL Low/Reverse Clutch (Bonded Piston) 2012-Up | — |
| 776 | Part # 238776AK | Bolt Set, FW6A-EL Bell Housing To Case (24 Pieces) 2012-Up | — |
| 777 | Part # 238777AK | Bolt Set, FW6A-EL Pump To Bell Housing (7 Pieces) 2012-Up | — |
| 778 not on diagram | Part # 238778AK | Bolt Set, FW6A-EL Pump Body To Stator (7 Pieces) 2012-Up | — |
| 779 not on diagram | Part # 238779AK | Bolt Set, FW6A-EL Bottom Pan To Case (16 Pieces) 2012-Up | — |
| 780 | Part # 238780AK | Bolt Set, FW6A-EL Rear Cover To Case (12 Pieces) 2012-Up | — |
| 782 | Part # 238782AK | Bolt Set, FW6A-EL Valve Body To Case (11 Pieces) 2012-Up | — |
| 784 | Part # 238784AK | Bolt Set, FW6A-EL 2-6 Clutch Housing To Rear Cover (8 Pieces) 2012-Up | — |
| 786 not on diagram | Part # 238786AK | Bolt Set, FW6A-EL Differential Housing To Differential Ring Gear (12 Pieces) 2012-Up | — |
| 791 | Part # 238791AK | Bolt Set, FW6A-EL Cooler To Bell Housing (3 Pieces) 2012-Up | — |
| 960 | Part # 238960AK | Piston Set, FW6A-EL 2011-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 238421A | Solenoid, FW6A-EL Shift #1 (1.132”OD)(3.947” Long)(Cast # 7.5 On End Of Snout) 2012-Up (Also Fits FW6A-EL Shift #4… | — |
| 422 | Part # 238422A | Solenoid, FW6A-EL Shift #2 (1.132”OD)(3.840” Long)(Cast # 7.6 On End Of Snout) 2012-Up (Also Fits FW6A-EL Shift #3… | — |
| 423 | Part # 238423A | Replaced by 238422A | — |
| 425 | Part # 238425A | Replaced by 238422A | — |
| 428 | Part # 238428A | Solenoid, FW6A-EL Pressure Control (.836”OD)(3.004” Long) 2012-Up | — |
| 435 | Part # 238435A | Solenoid, FW6A-EL On/Off (The Small One Next To Manual Valve 2012-Up | 1 |
| 440 | Part # 238440A | Replaced by 238421A | — |
| 740 | Part # 238740A | Valve Body, FW6A-EL (Cast # FZ01) (6 Solenoid) 2012-Up | 1 |
| 991 | Part # 238991-3A | Rooster Comb, FW6A-EL With Shaft (4.973" Long) 2012-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 411 | Part # 238411A | Pressure Switch A, FW6A-EL (3.850” Long)(Cast # 120731) 2012-Up | 2 |
| 412 | Part # 238412A | Pressure Switch B, FW6A-EL (2.895” Long)(Cast # 120730) 2012-Up | 2 |
| 446 | Part # 238446A | Wire Harness, FW6A-EL (Internal)(One 20 Pin Connector, Eight 2 Pin Connecctors, With 2 Wire Temperature Switch) 2012-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 238010A | Filter, FW6A-EL (2 Bolt)(Cast # FZ01-21-500) 2012-Up | 2 |
| 765 | Part # 238765A | Pan, FW6A-EL Bottom (16 Bolt) (Metal)(W/Allen Head Drain Plug) 2012-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 238070A | Seal, FW6A-EL Front Pump (.215" Thick)(2.365"OD)(1.689"ID) 2012-Up | 1 |
| 072 not on diagram | Part # 238072A | Seal, FW6A-EL Manual Lever (1.028"OD)(.615"ID) 2012-Up | 1 |
| 076 | Part # 238076A | Seal, FW6A-EL Axle (Bell Housing Side)(2.565"OD)(1.530"ID) 2012-Up | 1 |
| 077 | Part # 238077A | Seal, FW6A-EL Axle (Case Side)(2.490"OD)(1.500"ID) 2012-Up | 1 |
| 177 | Part # 238177AT | Ring, FW6A-EL Input Shaft (Front)(.065"Thick)(.960"OD)(Teflon) 2012-Up | 1 |
| 179 | Part # 238179AT | Ring, FW6A-EL Stator (Rear)(.075"Thick)(2.040"OD)(Teflon) 2012-Up | — |
| 347 | Part # 238347A | Boot, FW6A-EL Case Connector (.950"Tall, 2.020"OD, 1.070"ID 2012-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 238034A | Bushing, FW6A-EL Pump Body (.495"Wide)(1.840"OD)(1.730"ID) 2012-Up | — |
| 042 | Part # 238042A | Bushing, FW6A-EL Rear Planet (1.455"ID)(1.380"ID) 2012-Up | — |
| 046 | Part # 238046A | Bushing, FW6A-EL High Clutch Hub (.625"Wide)(1.229"ID) 2012-Up | — |
| 048 | Part # 238048A | Bushing, FW6A-EL Low Clutch Hub (.470"Wide)(.788"OD)(.710"ID) 2012-Up | — |
| 209 | Part # 238209A | Caged Needle Bearing, FW6A-EL Stator (Inner)(.786"ID)(Double Roll Of Needles) 2012-Up | — |
| 216 not on diagram | Part # 238216A | Bearing W/Races, FW6A-EL Rear Planet To Rear Ring Gear (.126"Thick)(2.467"OD)(1.742"ID) 2012-Up… | 1 |
| 217 | Part # 238217A | Bearing W/Races, FW6A-EL Rear Sun Gear To Rear Planet (.221"Thick)(2.412"OD)(1.777"ID) 2012-Up | 1 |
| 218 | Part # 238218AA | Race, FW6A-EL Rear Sun Gear To Rear Planet (.082"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AB | Race, FW6A-EL Rear Sun Gear To Rear Planet (.086"Thick)(2.337"OD)(1.661"ID) 2012-Up | — |
| 218 | Part # 238218AC | Race, FW6A-EL Rear Sun Gear To Rear Planet (.090"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AD | Race, FW6A-EL Rear Sun Gear To Rear Planet (.094"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AE | Race, FW6A-EL Rear Sun Gear To Rear Planet (.098"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AF | Race, FW6A-EL Rear Sun Gear To Rear Planet (.102"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AG | Race, FW6A-EL Rear Sun Gear To Rear Planet (.106"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AH | Race, FW6A-EL Rear Sun Gear To Rear Planet (.110"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AJ | Race, FW6A-EL Rear Sun Gear To Rear Planet (.114"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 218 | Part # 238218AK | Race, FW6A-EL Rear Sun Gear To Rear Planet (.118"Thick)(2.337"OD)(1.661"ID) 2012-Up | 1 |
| 229 | Part # 238229A | Bearing W/Races, FW6A-EL Pump To Drum (.126"Thick)(2.853"OD)(2.250"ID) 2012-Up | 1 |
| 230 | Part # 238230A | Caged Needle Bearing, FW6A-EL Stator (Inner, Rear) 2012-Up | 1 |
| 231 | Part # 238231A | Bearing W/Races, FW6A-EL Input Shaft To Low Clutch Hub (.126"Thick)(1.462"OD)(.809"ID) 2012-Up | 1 |
| 233 | Part # 238233A | Bearing W/Races, FW6A-EL Low Clutch Hub To High Clutch Hub (.138"Thick)(2.008"OD) (1.358"ID) 2012-Up | — |
| 234 | Part # 238234A | Bearing W/Races, FW6A-EL High Clutch Hub To Drive Transfer Gear Nut (.262"Thick) (3.160"OD)(2.327"ID) 2012-Up | 1 |
| 255 | Part # 238255A | Caged Needle Bearing, FW6A-EL Input Shaft To Rear Cover (.865"OD)(.555"ID) 2012-Up | — |
| 273 | Part # 238273A | Cup Race, FW6A-EL Pinion To Bell Housing (.746"Thick)(2.950"OD)(Cast # HO616-1148-08) 2012-Up | 1 |
| 274 | Part # 238274A | Cone Bearing, FW6A-EL Pinion To Bell Housing (1.397"ID)(16 Rollers)(Cast # HO616-1958-09) 2012-Up | 1 |
| 277 | Part # 238277AA | Shim, FW6A-EL Pinion To Bell (.020"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AB | Shim, FW6A-EL Pinion To Bell (.022"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AC | Shim, FW6A-EL Pinion To Bell (.024"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AD | Shim, FW6A-EL Pinion To Bell (.026"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AE | Shim, FW6A-EL Pinion To Bell (.028"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AF | Shim, FW6A-EL Pinion To Bell (.030"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AG | Shim, FW6A-EL Pinion To Bell (.032"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AH | Shim, FW6A-EL Pinion To Bell (.034"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AJ | Shim, FW6A-EL Pinion To Bell (.036"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AK | Shim, FW6A-EL Pinion To Bell (.038"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AL | Shim, FW6A-EL Pinion To Bell (.040"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AM | Shim, FW6A-EL Pinion To Bell (.042"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AN | Shim, FW6A-EL Pinion To Bell (.044"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AP | Shim, FW6A-EL Pinion To Bell (.046"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AQ | Shim, FW6A-EL Pinion To Bell (.048"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AR | Shim, FW6A-EL Pinion To Bell (.050"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AS | Shim, FW6A-EL Pinion To Bell (.052"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AT | Shim, FW6A-EL Pinion To Bell (.054"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AU | Shim, FW6A-EL Pinion To Bell (.056"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 277 | Part # 238277AV | Shim, FW6A-EL Pinion To Bell (.058"Thick)(2.905"OD)(2.562"ID) 2012-Up | 1 |
| 278 | Part # 238278A | Inner Race, FW6A-EL Drive Transfer Gear To Case (.513"Thick)(3.090"OD)(2.559"ID) (Cast # HO719-2008 KBC F-569171)… | 1 |
| 279 | Part # 238279-1A | Outer Race, FW6A-EL Drive Transfer Gear To Case (Stays In Case) 2012-Up | — |
| 279 | Part # 238279A | Ball Bearing, FW6A-EL Drive Transfer Gear To Case (Plastic Cage)(25 Balls) 2012-Up | — |
| 280 | Part # 238280A | Cup Race, FW6A-EL Pinion To Case (.668"Thick)(2.756"OD) (Cast # HO613-0414008) 2012-Up | 1 |
| 281 | Part # 238281A | Cone Bearing, FW6A-EL Pinion To Case (1.377"ID)(19 Rollers) (Cast # HO611-1626-09) 2012-Up | 1 |
| 290 | Part # 238290AA | Shim, FW6A-EL Differential To Bell Housing (.020"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AB | Shim, FW6A-EL Differential To Bell Housing (.022"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AC | Shim, FW6A-EL Differential To Bell Housing (.024"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AD | Shim, FW6A-EL Differential To Bell Housing (.026"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AE | Shim, FW6A-EL Differential To Bell Housing (.028”Thick)(3.100”OD)(1.815”) 2012-Up | 1 |
| 290 | Part # 238290AF | Shim, FW6A-EL Differential To Bell Housing (.030”Thick)(3.100”OD)(1.815”) 2012-Up | 1 |
| 290 | Part # 238290AG | Shim, FW6A-EL Differential To Bell Housing (.032”Thick)(3.100”OD)(1.815”) 2012-Up | 1 |
| 290 | Part # 238290AH | Shim, FW6A-EL Differential To Bell Housing (.034”Thick)(3.100”OD)(1.815”) 2012-Up | 1 |
| 290 | Part # 238290AJ | Shim, FW6A-EL Differential To Bell Housing (.036”Thick)(3.100”OD)(1.815”) 2012-Up | 1 |
| 290 | Part # 238290AK | Shim, FW6A-EL Differential To Bell Housing (.038"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AL | Shim, FW6A-EL Differential To Bell Housing (.040"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AM | Shim, FW6A-EL Differential To Bell Housing (.042"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AN | Shim, FW6A-EL Differential To Bell Housing (.044"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AP | Shim, FW6A-EL Differential To Bell Housing (.046"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AQ | Shim, FW6A-EL Differential To Bell Housing (.048"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AR | Shim, FW6A-EL Differential To Bell Housing (.050"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AS | Shim, FW6A-EL Differential To Bell Housing (.052"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AT | Shim, FW6A-EL Differential To Bell Housing (.054"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AU | Shim, FW6A-EL Differential To Bell Housing (.056"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AV | Shim, FW6A-EL Differential To Bell Housing (.058"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AW | Shim, FW6A-EL Differential To Bell Housing (.060"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 290 | Part # 238290AX | Shim, FW6A-EL Differential To Bell Housing (.062"Thick)(3.100"OD)(1.815") 2012-Up | 1 |
| 291 | Part # 238291A | Cup Race, FW6A-EL Differential To Bell Housing (.709"Thick)(3.150"OD) (Cast # KOYO STE4580) 2012-Up… | 1 |
| 292 | Part # 238292A | Cone Bearing, FW6A-EL Differential To Bell Housing (1.773"ID)(23 Rollers) (Cast # KOYO 32009JR-1YA1) 2012-Up… | 1 |
| 298 | Part # 238298-1A | Washer, FW6A-EL Under Manual Lever Seal (.062"Thick)(.907"OD)(.447"ID) 2012-Up | 1 |
| 298 | Part # 238298A | Caged Needle Bearing, FW6A-EL Case To Manual Shaft (.630"OD)(.393"ID)(12 Needles) (Cast # NTN 7E-HKS 10X16X10-1PX1)… | 2 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 238500A | Pump Assembly, FW6A-EL (Cast Iron)(7 Bolt) 2012-Up | — |
| 510 | Part # 238510A | Pump Cover, FW6A-EL (Cast Iron) (5.785"OD)(7 Bolt) 2012-Up | 1 |
| 520 | Part # 238520A | Stator W/Gears, FW6A-EL (Cast Iron)(7 Bolt) 2012-Up | — |
| 530 | Part # 238530A | Pump Gear Set, FW6A-EL (.473" Thick)(3.350"OD)(2 Flats) 2012-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 238100A | Friction, FW6A-EL 2-6 Clutch (.061")(32 Teeth)(6 3/4"OD) 2012-Up | 1 |
| 104 | Part # 238104A | Friction, FW6A-EL High Clutch (.062")(40 Teeth)(6 1/4"OD) 2012-Up | 1 |
| 106 | Part # 238106A | Friction, FW6A-EL 3-5/Reverse Clutch (.068")(40 Teeth)(6 5/8"OD) 2014 | 1 |
| 108 | Part # 238108A | Friction, FW6A-EL Low Clutch (.060")(28 Teeth)(4.600"OD) 2012-Up | 1 |
| 114 | Part # 238114A | Friction, FW6A-EL Low/Reverse Clutch (.064")(60 Teeth)(6 7/8"OD) 2012-Up | 1 |
| 120 | Part # 238120A | Steel, FW6A-EL 2-6 Clutch (.062”)(26 Teeth)(5.825”ID) 2012-Up | 1 |
| 124 | Part # 238124A | Steel, FW6A-EL High Clutch (.078")(40 Teeth)(5.508"ID) 2012-Up | 1 |
| 125 not on diagram | Part # 238125A | Steel, FW6A-EL High Clutch (.034")(40 Teeth)(5.700"ID)(Wavy) 2012-Up | 1 |
| 126 | Part # 238126A | Steel, FW6A-EL 3-5/Reverse Clutch (.063")(24 Teeth)(5.585"ID) 2012-Up | 1 |
| 128 | Part # 238128A | Steel, FW6A-EL Low Clutch (.079”)(32 Teeth)(3.762”ID) 2012-Up | 1 |
| 134 | Part # 238134A | Steel, FW6A-EL Low/Reverse Clutch (.062")(16 Teeth)(5.891"ID) 2012-Up | 1 |
| 140 | Part # 238140A | Pressure Plate, FW6A-EL 2-6 Clutch (.161")(10 Teeth)(5.810"ID) 2012-Up | 1 |
| 141 | Part # 238141AA | Apply Plate, FW6A-EL 2-6 Clutch (.066")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AB | Apply Plate, FW6A-EL 2-6 Clutch (.070")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AC | Apply Plate, FW6A-EL 2-6 Clutch (.074")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AD | Apply Plate, FW6A-EL 2-6 Clutch (.078")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AE | Apply Plate, FW6A-EL 2-6 Clutch (.082")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AF | Apply Plate, FW6A-EL 2-6 Clutch (.086")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AG | Apply Plate, FW6A-EL 2-6 Clutch (.092")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AH | Apply Plate, FW6A-EL 2-6 Clutch (.094")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 141 | Part # 238141AJ | Apply Plate, FW6A-EL 2-6 Clutch (.098")(24 Teeth)(5.825"ID) 2012-Up | 1 |
| 144 | Part # 238144A | Pressure Plate, FW6A-EL High Clutch (.124")(40 Teeth)(5.500"ID)(Stepped) 2012-Up | 1 |
| 146 | Part # 238146A | Pressure Plate, FW6A-EL 3-5/Reverse Clutch (.143")(12 Teeth)(5.585"ID) 2012-Up | 1 |
| 148 | Part # 238148A | Pressure Plate, FW6A-EL Low Clutch (.085")(32 Teeth)(3.759"ID) 2012-Up | 1 |
| 642 | Part # 238642A | Diode/Pressure Plate, FW6A-EL Low/Reverse (.750"Thick)(12 Outer Lugs) 2012-Up | 1 |
| 960 | Part # 238960A | Piston, FW6A-EL 2-6 Clutch (Bonded)(.355"Thick)(6 7/8"OD)(5.725"ID) 2012-Up | 1 |
| 964 | Part # 238964A | Piston, FW6A-EL Low Clutch (Bonded) (.466"Thick)(4.407"OD)(2.300"ID) 2012-Up | 1 |
| 965 | Part # 238965A | Piston, FW6A-EL 3-5/Reverse Clutch (Bonded)(.410" Thick)(6 5/8"OD)(5.755"ID) 2012-Up | 1 |
| 967 | Part # 238967A | Piston, FW6A-EL Low/Reverse Clutch (Bonded)(.650" Thick)(7 1/16"OD)(4.890"ID) 2012-Up | 1 |
| 970 | Part # 238970A | Spring/Retainer, FW6A-EL 2-6 Clutch (1.113" Thick)(5.922"ID)(10 Springs) 2012-Up | 1 |
| 977 | Part # 238977A | Spring/Retainer, FW6A-EL Low/Reverse Clutch (1.132" Thick)(6.036"ID)(12 Springs) 2012-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 555 | Part # 238555A | Drum, FW6A-EL High/Low Clutch (5 Clutch) 2012-Up | — |
| 574 | Part # 238574A | Clutch Hub, FW6A-EL High Clutch (40 Clutch Splines)(5 1/4" Long) 2012-Up | 1 |
| 575 | Part # 238575A | Clutch Hub, FW6A-EL Low Clutch (28 Clutch Splines)(5 5/8"Long) 2012-Up | 1 |
| 580 | Part # 238580A | Planet, FW6A-EL Rear (3 Gear)(1.630" Tall)(16 Outer Lugs) 2012-Up | 1 |
| 582 | Part # 238582A | Planet, FW6A-EL Middle (3 Gear)(2.640" Tall) 2012-Up | 1 |
| 584 | Part # 238584A | Planet, FW6A-EL Front (3 Gear)(3.172"Tall)(2.085"OD Threads) 2012-Up | — |
| 590 | Part # 238590A | Ring Gear, FW6A-EL Rear Planet (109 Teeth)(40 Outer Clutch Splines) 2012-Up | 1 |
| 592 | Part # 238592A | Ring Gear, FW6A-EL Middle Planet (95 Teeth)(With 32 Spline Aluminum Clutch Hub Pressed Onto The Ring Gear) 2012-Up | 1 |
| 594 | Part # 238594A | Ring Gear, FW6A-EL Front Planet (98 Teeth)(48 Outer Clutch Splines) 2012-Up | 1 |
| 610 | Part # 238610A | Sun Gear, FW6A-EL Rear Planet (68 Teeth)(1.182" Tall)(2.925"OD) 2012-Up | 1 |
| 612 | Part # 238612A | Sun Gear, FW6A-EL Middle Planet (40 Teetth)(1.193” Tall)(2.105”OD) 2012-Up | 1 |
| 614 | Part # 238614A | Sun Gear, FW6A-EL Front Planet (38 Teeth)(1.032"Tall)(2.092"OD) 2012-Up | 1 |
| 670 | Part # 238670A | Input Shaft, FW6A-EL (12 1/2" Long) 2012-Up | 1 |
| 710 | Part # 238710A | Gear, FW6A-EL Drive Transfer (56 Teeth)(5.627"OD) 2012-Up | 1 |
| 712 | Part # 238712A | Driven Transfer Gear, FW6A-EL (59 Teeth)(5 1/2"OD)(With 15 Lug Park Gear) 2012-Up | 1 |
| 715 not on diagram | Part # 238715A | Differential Assembly, FW6A-EL (12 Bolt)(6” Tall)(With 75 Teeth, 3 Groove Ring Gear) 2012-Up | — |
| 716 | Part # 238716A | Diff Hsg, FW6A-EL(12 Bolt)(6" Tall)(Less Ring Gear)2012-Up | 1 |
| 720 | Part # 238720A | Ring Gear, FW6A-EL Differential (75 Teeth, 3 Groove)(12 Bolt)(1.215" Thick)(8 1/16"OD) 2012-Up | 1 |
| 730 | Part # 238730A | Pinion, FW6A-EL (22 Teeth)(3 Light Grooves)(5 1/2"Tall) 2012-Up | 1 |
| 750 | Part # 238750A | Bell Housing, FW6A-EL (6 5/8" Top Bolts)(Starter At 3:00)(24 Bolts To Case)(Cast # FZ21) 2012-Up | 1 |
| 759 | Part # 238759A | Rear Cover, FW6A-EL (12 Bolts) (Aluminum) 2012-Up | — |
| 760 | Part # 238760A | Case, FW6A-EL (Cast # FZ21) (24 Bolts To Bell, 12 Bolt Rear Cover, 17 Pan Bolts)2012-Up | 1 |
| 950 | Part # 238950A | Piston Housing, FW6A-EL 2-6 Clutch (Aluminum)(8 Bolts To Rear Cover) (5.440"ID) (Cast # FZ01) 2012-Up | 2 |
| 995 | Part # 238995A | Park Pawl Assembly, FW6A-EL (7 Pieces) 2012-Up | — |
| 999 | Part # 238999-3A | Lube Pipe Adapter, Fw6A-EL Rear Cover To Bell Housing Lube Pipe (2.165" Long) 2012-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 228 | Part # 238228A | Replaced by U238216A | — |
| 288 | Part # 238288A | Replaced by U238291A | — |
| 289 | Part # 238289A | Replaced by U238292A | — |
| 465 | Part # 238465A | ECM, FW6A-EL (14 Blade Connector)(Cast # K4238 FZ21 21 EMIC) 2012-Up | 1 |
| 493 | Part # 238493-1A | Fill Plug, FW6A-EL On Top Of Case (23mm Hex Head) 2012-Up | — |
| 493 | Part # 238493A | Dip Stick, FW6A-EL (1 Bolt, Plastic)(Cast # FZ0110AAO) 2012-Up | 2 |
| 698 | Part # 238698-2A | Oil Shield, FW6A-EL (2 Bolts To Case)(Tin)(7 1/4"Long) 2012-Up | 1 |
| 698 | Part # 238698A | Oil Shield, FW6A-EL (3 Bolts To Bell Housing)(3/4 Round) 2012-Up | 1 |
| 699 | Part # 238699A | Oil Shield, FW6A-EL (Black Plastic)(Cast # FZ21) 2012-Up | 2 |
| 795 | Part # 238795A | Nut, FW6A-EL Drive Transfer Gear To Support 2012-Up | — |
| 861 | Part # 238861A | Snap Ring, FW6A-EL Holds 2-6 Clutch Pressure Plate In (.086" Thick)(7 3/8"OD) 2012-Up | 1 |
| 867 | Part # 238867A | Snap Ring, FW6A-EL Holds Middle Planet Ring Gear To Rear Planet (.046" Thick)(5.635"OD) 2012-Up | 1 |
| 873 | Part # 238873AA | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.048" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AB | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.052" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AC | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.056" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AD | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.060" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AE | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.064" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AF | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.068" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AG | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.072" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AH | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.076" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AK | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.084" Thick)(6 3/4"OD) 2012-Up | 1 |
| 873 | Part # 238873AL | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.088" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AA | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.048" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AB | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.052" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AC | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.056" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AD | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.060" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AE | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.064" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AF | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.068" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AG | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.072" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AH | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.076" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AJ | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.080" Thick)(6 3/4"OD) 2012-Up | 1 |
| 876 | Part # 238876AK | Snap Ring, FW6A-EL Holds Low Clutch Pressure Plate In (.084" Thick)(6 3/4"OD) 2012-Up | 1 |
| 877 | Part # 238877A | Snap Ring, FW6A-EL Holds Low Clutch Spring Retainer In (.039"Thick)(2.233"OD) 2012-Up | 1 |
| 878 not on diagram | Part # 238878AJ | Snap Ring, FW6A-EL Holds High Clutch Pressure Plate In (.080" Thick)(6 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AA | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.070" Thick)(7 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AB | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.074" Thick)(7 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AC | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.078" Thick)(7 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AD | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.082" Thick)(7 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AE | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.086" Thick)(7 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AF | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.090" Thick)(7 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AG | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.094” Thick)(7 3/4”OD) 2012-Up | 1 |
| 883 | Part # 238883AH | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.098” Thick)(7 3/4”OD) 2012-Up | 1 |
| 883 | Part # 238883AJ | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.102” Thick)(7 3/4”OD) 2012-Up | 1 |
| 883 | Part # 238883AK | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.106" Thick)(7 3/4"OD) 2012-Up | 1 |
| 883 | Part # 238883AL | Snap Ring, FW6A-EL Holds Low/Reverse Clutch Pressure Plate In (.110" Thick)(7 3/4"OD) 2012-Up | 1 |
| 889 not on diagram | Part # 238889A | Snap Ring, FW6A-EL Holds Front Planet Ring Gear To Middle Planet (.123" Thick)(5.388"OD) (Stepped) 2012-Up | 1 |
| 974 | Part # 238974A | Spring/Retainer, FW6A-EL Low Clu(1.036"THK, 3.127"OD, 2.327"ID)(22 Springs)2012-Up | 1 |
| 975 | Part # 238975A | Spring/Retainer, FW6A-EL 3-5/Reverse (.840"Thick)(5.885"ID)(12 Springs) 2012-Up | 1 |
| 984 | Part # 238984A | Retainer/Piston, FW6A-EL Low Clutch (Bonded)(.938" Thick)(4.170"OD)(2.165"ID) 2012-Up | 1 |
| 991 | Part # 238991-2A | Detent Spring, FW6A-EL Rooster Comb (2 Bolts To Case) 2012-Up | 1 |
| 991 | Part # 238991-5A | Roll Pin, FW6A-EL Holds Manual Shaft To Rooster Comb (.160"OD)(1.010" Long) 2012-Up | — |
| 992 | Part # 238992A | Manual Lever, FW6A-EL Upper External Lever (Letter "N") 2012-Up | 1 |
| 994 | Part # 238994A | Park Rod Actuator, FW6A-EL (8 1/4" Long) 2012-Up | 1 |
| 998 | Part # 238998A | Cooler, FW6A-EL (External)(3 Bolt To Bell Housing) 2012-Up | 1 |
| 999 | Part # 238999-1A | Lube Pipe, FW6A-EL Inside The Pinion, From Bell Housing To Case (.310"OD)(6 1/2"Long) 2012-Up | 1 |
| 999 | Part # 238999-2A | Lube Pipe, FW6A-EL Rear Cover To Bell Housing (7 3/4" Long) 2012-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.