FK0 Gen 2 parts diagram
Transmission page:
Positions:
171 total, 140 on the diagram
Parts:
247 total, 16 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 212002A | Overhaul Kit, RE0F10A (JF011E) 2007-Up (CVT FWD)(Dodge/Jeep/Nissan/Mitsubishi/Renault/ Suzuki) | — |
| 002 not on diagram | Part # 212002AFP | Overhaul Kit, RE0F10A (JF011E) 2007-UP (CVT FWD)(Dodge/Jeep/Nissan/Mitsubishi/Renault/ Suzuki) (With Pistons) | — |
| 002 not on diagram | Part # 212002BF | Overhaul Kit, RE0F10B 2011-Up | — |
| 004 not on diagram | Part # 212004A | Master L/Steels Kit, RE0F10A (JF011E) 2007-Up (CVT FWD)(Dodge/Jeep/Nissan/Mitsubishi/ Renault/Suzuki)… | — |
| 006 not on diagram | Part # 212006A | Master W/Steels Kit, RE0F10A (JF011E) 2007-Up (CVT FWD)(Dodge/Jeep/Nissan/Mitsubishi/ Renault/Suzuki)… | — |
| 030 not on diagram | Part # 212030 | Bushing Kit, RE0F10A/F10B (JF011E) (6 Pieces) 2007-14 | — |
| 030 not on diagram | Part # 212030A | Bushing Kit, RE0F010A/F10B/ F10D/F10E/F10J 2007-Up (5 Pieces) | — |
| 175 not on diagram | Part # 212175A | Ring Kit, RE0F10A (JF011E) 2006-Up | — |
| 229 | Part # S212229AK | Bearing Set, RE0F10A (JF011E) Primary & Secondary Pulley (Contains 3 Bearings # 229, 235, & 236) 2007-Up (Sonnax) | — |
| 564 not on diagram | Part # 212564A | Piston Kit, RE0F10A(JF011E) (Nissan/Dodge) Foward Drum (Bonded Piston/Retainer) (24 Springs) 2007-Up | — |
| 566 not on diagram | Part # 212566A | Piston Kit, RE0F10A(JF011E) (Nissan/Dodge) Rev Planet To Case 2007-Up | — |
| 741 | Part # S203741ALK | Valve Kit, RE0F10A (JF011E) Solenoid Valve (Contains; Valve, Sleeve, & Spring) 2007-Up (Sonnax) | — |
| 741 | Part # S203741FOSK | Valve Kit, RE0F09A (JF010E) TCC Limit & Lube Valve Kit (Oversized) (Contains Valve, Spring & End Plug)… | — |
| 741 | Part # S212741CK | Valve Kit, RE0F10A (JF011E) Torque Converter Pressure Regulator (Contains: Valve & End Plug)… | — |
| 741 | Part # S212741COSK | Valve Kit, RE0F10A (JF011E) Lock-Up Control (Oversize)(Contains Large Valve, Small Valve & Sleeve)(Sonnax)… | — |
| 741 | Part # S212741PK | Valve Kit, RE0F10A (JF011e) Oversized Secondary Pulley Control Valve & End Plug (Contains Valve & End Plug)… | — |
| 741 | Part # S212741POSK | Valve Kit, RE0F10A (JF011E) Oversized Secondary Pulley Control Valve & End Plug (Contains: Valve & End Plug)… | — |
| 776 | Part # 212776AK | Bolt Set, RE0F10A (JF011E) (Nissan) Bell To Case (14mm Hex x 1.500” Long)(23 Pieces) 2007-Up | — |
| 776 | Part # 212776DK | Bolt Set, RE0F10A (JF011E) (Dodge) Bell To Case (14mm Hex x 1.500” Long)(22 Pieces) 2007-Up | — |
| 777 | Part # 212777AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Pump To Case (3-6mm Allen x 3.070” Long) (1-12mm Hex x 1.685”Long) (4 Pieces)… | — |
| 778 | Part # 323778AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Pump Cover To Pump (10mm)(4 Pices) 2007-Up | — |
| 779 not on diagram | Part # 212779AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Bottom Pan To Case (19 Pcs) (10mm x .810”Long) 2007-Up | — |
| 780 | Part # 212780AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Coverter Reactor To Case (12mm Hex x 1.405”Long)(7 Pieces) 2007-Up | — |
| 781 | Part # 212781AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Rear Cover To Case (14mm Hex x 1.500”Long) (19 Pieces) 2007-Up | — |
| 783 | Part # 212783AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Rear Cover To Bearing Retainers (Both) (3 Pieces Each)(12mm Hex x 1.430”… | — |
| 786 | Part # 212786AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Ring Gear To Differential (17mm x 1.260”Long) (8 Pieces) 2007-Up | — |
| 791 not on diagram | Part # 212791AK | Bolt Set, RE0F10A (JF011E) (Nissan/Dodge) Valve Body To Case… | — |
| 960 | Part # 212960AK | Piston Kit, RE0F10A (JF011E) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 212529A | Converter Reactor, RE0F10A (JF011E) (Nissan/Dodge) (7 Bolt Cast Iron)(32 Splines) (2 Rings One Threaded Hole) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 425 | Part # 212425A | Solenoid, RE0F10A/F10B (JF011E) TCC Control “B” (06926-1) 2007-Up | — |
| 428 | Part # 203428A | Solenoid, RE0F10A/F10B (JF011E) Line Pressure A & B 2007-Up | — |
| 430 | Part # 212430A | Solenoid, RE0F10A/F10B (JF011E) (Nissan/Dodge) TCC L/Up Select (BC22DN) 2007-Up | — |
| 435 | Part # 203435A | Solenoid, RE0F09A Line Pressure B (Cast # 06Z05-2) 2003-Up (Also Fits REOFO9A Line Pressure A # 428 2003-Up) | 1 |
| 507 | Part # 323507-1A | Valve, RE0F10A (JF011E) (Nissan/Dodge) Pressure Regulator (In Pump)(1.655” Long) (.670”OD) 2007-Up | — |
| 507 | Part # S212507A-1 | Valve, RE0F10A (JF011E) Pump Flow Control Valve 2007-Up | — |
| 507 | Part # T212507A-1 | Valve, RE0F10A (JF011E) Pump Flow Control Valve 2007-Up (Contains Valve & 18 High Strength 6mm Steel Balls)… | — |
| 705 | Part # 205705-1A | Steel Ball, RE0F08A/F08B(JF009E) Primary Pulley & Secondary Pulley) | — |
| 707 | Part # 212707-1A | Steel Ball, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley (.236”OD) 2007-Up | — |
| 740 not on diagram | Part # 212740A | Valve Body, RE0F10A/RE0F10B (JF011E)(Nissan/Dodge)(4 Solenoids)(2 Pressure Switches) (W/Stepper Motor)… | — |
| 740 not on diagram | Part # 212740AA | Valve Body, RE0F10A (JF011E) (Nissan/Dodge)(4 Solenoids)(1 Pressure Switch) (W/Stepper Motor)… | — |
| 741 | Part # 212741-1A | Manual Valve, RE0F10A (JF011E) (Nissan/Dodge) Aluminum (4.315”Long)(.470”OD) (3 Lands) 2007-Up | — |
| 991 | Part # 212991-3A | Rooster Comb, RE0F10A (JF011E) (Nissan/Dodge) (5 Detents) (.475”Hole)(4 Holes) (.760”Thick) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 not on diagram | Part # 212410A | Switch, RE0F10A (JF011E) (Nissan/Dodge) PRNDL (8 Blade Rectangle Connector)(2 Bolts To Case)(All Plastic)… | — |
| 410 not on diagram | Part # 212410AA | Switch, RE0F10A (JF011E) PRNDL (Dodge Caliber, Jeep Compass and Patriot, Mitsubishi Lancer And Outlander) 2006-16… | — |
| 414 | Part # 203414A | Sensor, RE0F09A/F09B Secondary Pressure (A-FPS A)(3 Prong Connector)… | — |
| 436 | Part # 212436A | Sensor, RE0F09A/F09B ISS/OSS/ Primary Pulley (90 Degrees)(3 Pin Oval Connector) (2.220”Tall)… | — |
| 438 | Part # 212438A | Sensor, RE0F08A/F08B(JF009E) On Top Of Bell Housing (90 Degrees)(.665”OD O-Ring) (1.920”Long) 2009-Up… | — |
| 446 | Part # 212446 | Wire Harness, RE0F10A (JF011E) Internal… | — |
| 446 | Part # 212446A | Wire Harness, RE0F10A (JF011E) (Nissan/Dodge) Internal… | — |
| 446 | Part # 212446B | Wire Harness, RE0F10A (JF011E) (Nissan/Dodge) Internal… | — |
| 452 | Part # 212452A | Ratio Control Motor, RE0F10A (JF011E) (Stepper Motor) (6 Pin Connector) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 212010A | Filter, RE0F10A/F10B(JF011E) Chrysler/Mitsubishi/Nissan 2007-Up (CVT2)(.580”Tall Square Pick-Up) | 1 |
| 010 | Part # 212010B | Filter, RE0F10A(JF011E) Nissan 2007-Up (.910”Tall Square Pick-Up)(3 Bolt) | 1 |
| 013 | Part # 212013A | Cartridge Filter, RE0F10A (JF011E)(Nissan)(Under Cooler) (2.485”Tall)(1.435”OD) | — |
| 013 | Part # 212013B | Cartridge Filter, RE0F10A (JF011E)(Nissan)(Under Cooler) (1.915”Tall)(1.705”OD) | — |
| 765 | Part # 212765A | Pan, RE0F10A (JF011E)(Nissan) (19 Bolts)(2 Dowel Pins) 2007-Up | — |
| 765 | Part # 212765D | Pan, RE0F10A (JF011E)(Dodge) (18 Bolts)(2 Dowel Pins) 2007-Up | — |
| 765 | Part # 212765DB | Pan, RE0F10A (JF011E)(Dodge) (18 Bolts)(2 Dowel Pins)(Drain Plug)(No Step)(2 Round Magnet Dimples)(4 Squares)… | — |
| 765 | Part # 212765DC | Pan, RE0F10A (JF011E)(Dodge) (18 Bolts)(2 Dowel Pins)(No Drain Plug)(No Step)(2 Round Magnet Dimples)(3 Squares)… | — |
| 765 | Part # 212765DD | Pan, RE0F10A (JF011E)(Dodge) (18 Bolts)(2 Dowel Pins)(Drain Plug)(w/ Step)(2 Round Magnet Dimples)(4 Squares)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 212070A | Seal, RE0F10A/F10B (JF011E) (Nissan /Dodge) Front (Pump) 2007-Up | — |
| 072 | Part # 60072 | Seal, A24A / M24A / S24A / MDLA / M4TA / MP7A / SP7A / S4XA / A4RA / B4RA / BMXA Manual Shaft | 3 |
| 076 | Part # 83076A | Seal, RE0F08A (JF009E) Bell Housing Side 2007-Up | 1 |
| 076 | Part # 83076AA | Seal, RE0F08A (JF009E) Axle Case Side 2002-Up | 1 |
| 076 | Part # 212076C | Seal, RE0F10A (JF011E) (4WD) Transfer Case To Bell Housing 2008-UP | — |
| 077 | Part # 212077A | Seal, RE0F10A (JF011E) (Nissan/Dodge) Case To Differential (2.210”OD)(1.530”ID) (NOK AH2365H)(.320”/.525”Thick) 2007-Up | — |
| 177 not on diagram | Part # 212177AT | Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft (Teflon) (Butt Joint)(1.120”OD) (.070”Thick) 2007-Up | — |
| 177 not on diagram | Part # 212177BT | Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft (Rear)(Teflon)(.670”OD)(.065”Thick) 2007-Up | — |
| 178 not on diagram | Part # 212178AT | Ring, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley To Rear Cover (.665”OD)(Teflon) (Solid)(Black) 2007-Up | — |
| 179 | Part # 212179A | Ring, RE0F10A (JF011E) (Nissan/Dodge) Converter Reactor (2.515”OD)(.085”Wide) 2007-Up | — |
| 183 | Part # 212183AT | Ring, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley Piston (.105”Thick)(5.150”OD) (Teflon) 2007-Up | — |
| 187 | Part # 212187A | Ring, RE0F10A (JF011E) (Nissan/Dodge) Pulley Piston (5.860”OD)(.103”Thick) 2007-Up | — |
| 300 | Part # 212300AW | Gasket, RE0F10A/F10B (JF011E) Chrysler/Mitsubishi Pan 2007-Up (18 Bolt Holes) (2 Pin Holes) | — |
| 300 | Part # 212300BW | Gasket, RE0F10A (JF011E) Nissan Pan 2007-Up (19 Bolt Holes)(2 Pin Holes) | — |
| 309 | Part # 212309A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Pump Bolt To Case (.430”OD)(.070”Thick) 2007-Up | — |
| 310 not on diagram | Part # 212310A | Seal, RE0F10A (JF011E) (Nissan/Dodge) Pump To Case (.790”OD)(.460”ID)(.095”Thick) 2007-Up | — |
| 311 not on diagram | Part # 212311A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Pump Cover To Body (Molded)(7 Bends) (.090”Thick) 2007-Up | — |
| 313 | Part # 323313A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Rear Pump To Body (Outer) 2007-Up | — |
| 314 not on diagram | Part # 323314A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Rear Pump To Body (Inner) 2007-Up | — |
| 326 | Part # 212326A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Cooler Filter Housing To Case (2.760”OD) (.125”Thick) 2007-Up | — |
| 342 not on diagram | Part # 212342A | Transfer Seal, RE0F08A/F08B (JF009E) Valve Body To Case (Rubber)(.125”Thick)(.630”OD) (.330”ID) 2007-Up | — |
| 344 not on diagram | Part # 212344A | O-Ring, RE0F08B (JF009E) Rear Cover To Case Transfer (.065”Thick)(.860”OD) 2009-Up | — |
| 347 | Part # 212347A | O-Ring, RE0F08B (JF009E) Case Connector To Case (1.320”OD)(.140”Thick) 2009-Up | — |
| 369 | Part # 212369A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Output Speed Sensor To Bell (.690”OD) (.080”Thick) 2007-Up | — |
| 370 not on diagram | Part # 212370A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Speed Sensor To Case (.695”OD) (.080”Thick) 2007-Up | — |
| 371 | Part # 212371A | O-Ring, RE0F08A/F08B (JF009E) Dipstick Tube To Case (.745”OD)(.100”Thick) 2007-Up | — |
| 377 not on diagram | Part # 212377A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Primary Sensor To Valve Body 2007-Up… | — |
| 378 | Part # 212378A | Seal, RE0F10A (JF011E) (Nissan/Dodge) Oil Cooler To Case (Brass Or Copper)(.035”Thick) (.875”OD) 2007-Up | — |
| 380 not on diagram | Part # 212380A | O-Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft To Converter (.955”OD)(.070”Thick) 2007-Up | — |
| 387 | Part # 212387A | Gasket, RE0F10A (JF011E) (Nissan/Dodge) Drain Plug To Pan (Copper)(.695”OD)(.510”ID) (.038”Thick) 2007-Up | — |
| 387 | Part # 323387A | O-Ring, RE0F08A/F08B (JF009E) Partial Drain Plug To Case (.100”Thick) 2007-Up | — |
| 389 not on diagram | Part # 212389A | O-Ring, RE0F08A/F08B (JF009E) Rear Cover To Bearing Retainer (.455”OD) 2007-Up | — |
| 391 | Part # 212391A | O-Ring, RE0F08A/F08B (JF009E) Pressure Tap (.465”OD)(.085”Thick) 2007-Up | — |
| 391 | Part # 212391B | O-Ring, RE0F10A(JF011E) (Nissan/Dodge) Pressure Plug To Rear Cover (.940”OD) (.080”Thick) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 031 | Part # 212031A | Bushing, RE0F10A Converter Hub (1.440”ID)(Smooth) 2007-Up | — |
| 032 | Part # 212032A | Bushing, RE0F10A (JF011E) (Nissan/Dodge) Converter Reactor (1.040”OD)(.920”ID) (.400”Wide)(Babbit)(2 Grooves) 2007-Up | — |
| 035 | Part # 212035A | Bushing, RE0F10A (JF011E) (Nissan/Dodge) Pump Drive Sprocket To Converter Reactor (1.440”ID)(1.623”OD)(Babbit)… | — |
| 036 | Part # 323036A | Bushing, RE0F10A (JF011E)(Nissan/Dodge) Pump Cover Shaft & Shaft To Pump Body (.395”ID)(.475”OD)(.500”Wide) 2007-Up | — |
| 047 | Part # 212047A | Bushing, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley To Input Shaft (.550”OD) (.540”Long)(Babbitt W/ Oil Pockets)… | — |
| 205 | Part # 212205-1A | Spacer/Shim, RE0F10A (JF011E) (Nissan/Dodge) Bell To Pump Drive Sprocket (Rear) (.035”Thick)(2.523”OD)(2.080”ID)… | — |
| 205 | Part # 212205A | Spacer/Shim, RE0F10A (JF011E) (Nissan/Dodge) Bell To Pump Drive Sprocket (Front) (.023”Thick)(2.523”OD)(2.080”ID)… | — |
| 211 | Part # 212211A | Bearing W/Races, RE0F10A (JF011E) (Nissan/Dodge) Converter Reactor To Drum (2.315”OD)(1.640”ID)(.160”Thick) 2007-Up | — |
| 227 | Part # 212227A | Spacer, RE0F10A (JF011E) Inner Race To Drive Transfer Gear (2.120”OD)(1.415”ID) (.125”Thick) 2007-Up | — |
| 228 | Part # 212228A | Bearing W/Races, RE0F10A (JF011E) Drive Transfer On Secondary Pulley (14 Rollers) (3.145”OD)(KOYO RNU208-3)… | — |
| 229 | Part # 212229A | Ball Bearing, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley (Rear)(.665”Thick) (3.540”OD)(1.770”ID)(13 Balls)… | — |
| 230 | Part # 212230A | Shim, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley Bearing To Rear Cover (3.525”OD)(2.995”ID)(Selective) 2007-Up | — |
| 232 | Part # 212232A | Bearing W/ Races, RE0F10A (JF011E) (Nissan Dodge) Drum To Sungear (.150”Thick) (2.390”OD)(1.580”ID) 2007-Up… | — |
| 235 | Part # 212235A | Ball Bearing, RE0F10A (JF011E) (Nissan/Dodge) (Rear) (3.145”OD)(1.575”ID)(.625”Thick) (NSK 40T018) 2007-Up | — |
| 264 | Part # 212264A | Ball Bearing, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley (Front)(3.975”OD) (2.360”ID)(NSK ANX1UR BOTM04) 2007-Up | — |
| 265 | Part # 212265A | Spacer, RE0F10A (JF011E) (Nissan/Dodge) Seal To PRNDL Switch (Steel)(.590”OD) (.475”ID)(.512”Thick) 2007-Up | — |
| 273 | Part # 212273A | Race, RE0F10D (JF016E) Pinion To Bell & Pinion To Case (Tapered)(2.440”OD)(1.983”ID) (.550”Thick) 2013-Up | — |
| 274 | Part # 212274A | Bearing, RE0F10A (JF011E) (Nissan/Dodge) Pinion To Bell (Tapered)(1.180”ID)(16 Rollers) (KOYO 30206JR) 2007-Up… | — |
| 278 | Part # 212278A | Washer, RE0F10A (JF011E) (Nissan/Dodge) Drive Sprocket To Converter Reactor (3 Tabs) (2.675”OD)(2.010”ID)(.050”Thick)… | — |
| 281 | Part # 212281A | Replaced by 323281A | — |
| 290 | Part # 212290A | Shim, RE0F10A (JF011E) (Nissan/Dodge) Differential To Case (Selective) 2007-Up | — |
| 291 | Part # 212291A | Race, RE0F10A (JF011E) (Nissan/Dodge) Differential To Bell (2.675”OD)(.570”Thick)(2.250D) (NTF 32008XJG) 2007-Up… | — |
| 292 | Part # 212292A | Bearing, RE0F10A (JF011E) (Nissan/Dodge) Differential To Bell (Tapered)(1.575”OD) (22 Rollers)(NTF 32008XJG) 2007-Up… | — |
| 436 | Part # 203436-1A | Shim, RE0F09A Sensor To Bell Housing (.039”Thk)(.545”OD) (.260”ID) 2003-Up (Also Fits 20 Series Honda B7XA Only)… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 212500A | Pump, RE0F10A(JF011E) (Nissan/Dodge) (Cast Number # On Pump Body Is KA6X0623E9) (4 Bolt) 2007-Up | 1 |
| 510 | Part # 212510A | Pump Body, RE0F10A(JF011E) (Nissan/Dodge)(4 Bolt Aluminum) (4 Bolt Cover)(1.100”ID Filter Neck)(Cast # KA6X0623E9)… | 1 |
| 519 | Part # 212519A | Pump Cover, RE0F10A (JF011E) (NIssan/Dodge)(Cast Iron) (4 Bolt)(1.720”Thick) (One Threaded Boss On Top) 2007-Up | — |
| 528 | Part # 323528A | Spacer Plate, RE0F10A (JF011E) (Nissan/Dodge) Pump (Rear) 2.180”OD)(.595”ID) (.363”Thick)… | — |
| 532 | Part # 212532A | Rotor, RE0F10A(JF011E) (Nissan/Dodge) Pump (.865”Thick)(12 Slots)(18 Splines) (1.495”OD) 2007-Up | — |
| 533 | Part # 212533A | Vanes, RE0F10A (JF011E) (Nissan/Dodge) Pump (.052”Thick)(.865”Long)(.315”Wide) 2007-Up | — |
| 534 | Part # 212534A | Slide, RE0F10A (JF011E) (Nissan/Dodge) Pump (Outer) (2.120”OD)(.865”Thick) (Has Two Alignment Pin Holes) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 108 | Part # 203108A | Friction, RE0F09A/F09B Forward Clutch (.061”)(36 Teeth)(5.430”OD) 2003-Up | 1 |
| 110 | Part # 203110A | Friction, RE0F09A/F09B Reverse Clutch (.062”)(40 Teeth)(7 1/16”OD) 2003-Up | 1 |
| 119 not on diagram | Part # 212119A | Fri Module, RE0F10D (JF016E) 2007-Up | — |
| 128 | Part # 212128A | Steel, RE0F10A (JF011E) (Nissan/Dodge) Forward Clutch (.050”Thick)(30 Teeth)(4.725”ID) (5.700”OD) 2007-Up | — |
| 130 | Part # 203130A | Steel, RE0F09A/F09B Reverse Clutch (.054”)(12 Teeth)(6 7/16”ID) 2003-Up | 1 |
| 131 | Part # 212131A | Cushion, RE0F10A (JF011E) (Nissan/Dodge) Reverse Clutch (.075”Thick)(4 Teeth)(6 7/16”ID) 2007-Up | — |
| 139 not on diagram | Part # 212139A | Steel Module, RE0F10A (JF011E) 2007-Up | — |
| 148 | Part # 203148A | Pressure Plate, RE0F09A/F09B Forward Clutch (.140”)(30 Teeth)(4.719”ID) 2003-Up | — |
| 150 | Part # 212150A | Pressure Plate, RE0F10A (JF011E) (Nissan/Dodge) Reverse Clutch (Top) (6.455”ID) (.145”Thick)(12 Teeth) 2007-Up | — |
| 691 | Part # 212691-3A | Return Spring, RE0F08A/F08B Ratio Control Motor Follower (1.645”Long)(.820”OD & .810”OD Retainers On Each End) 2007-Up | — |
| 853 | Part # 212853A | Cushion, RE0F10A (JF011E) (Nissan/Dodge) Forward (Beveled) (5.475”OD)(4.890”ID) (.060”Thick) 2007-Up | — |
| 960 | Part # 212960A | Piston, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley (3.015”Thick)(5.150”OD) (1.615”ID) 2007-Up | — |
| 964 | Part # 212964A | Piston, RE0F10A (JF011E) (Nissan/Dodge) Forward (Bonded) (5.505”OD)(2.730”ID) (.685”/.475”Thick) 2007-Up | — |
| 964 | Part # 212964BHP | Piston, RE0F10B (JF011E) Forward (Bonded)(Hi-Performance Blue) 2011-Up | — |
| 966 | Part # 212966A | Piston, RE0F10A (JF011E) (Nissan/Dodge) (Bonded)(7”OD) (1.765”Tall)(24 Springs) 2007-Up | — |
| 974 | Part # 212974A | Return Spring, RE0F10A (JF011E) (Nissan/Dodge) Forward (24 Springs)(.860”Thick) (3.865”OD) 2007-Up | — |
| 977 | Part # 212977A | Stiffner Plate, RE0F10A (JF011E)(Nissan/Dodge) Reverse Clutch For Retainer (3 Teeth) (.045”Thick)(7 1/8”OD) 2007-Up | — |
| 981 | Part # 212981A | Piston, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley (5.858”OD)(1.620”Tall)(1.575”ID) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 469 | Part # 212469A | ROM Assembly, RE0F10A (JF011E) (Nissan/Dodge) 5 Pin Connector (1.340”Wide) (Plastic Body) 2007-Up | — |
| 525 | Part # 212525A | Chain, RE0F10A(JF011E) (Nissan/Dodge) Pump Drive (38 Links)(.240”Thick) (No Pins Included) 2007-Up | — |
| 526 | Part # 212526A | Sprocket, RE0F10A (JF011E) (Nissan/Dodge) Pump Drive (35 Teeth)(4 Slots For Converter)(.440”Thick)(2.690”OD)… | — |
| 526 | Part # 212526A-1 | Sprocket, RE0F10A(JF011E)(Nissan/Dodge) Pump Drive (35 Teeth)(4 Slots For Converter) (.440”Thick)(2.690”OD)… | — |
| 526 | Part # 212526B | Sprocket, RE0F10A(JF011E) (Nissan/Dodge) Pump Drive Sprocket (35 Teeth)(4 Slots For Converter)(.398”Thick)(2.690”OD)… | — |
| 527 | Part # 212527A | Sprocket, RE0F10A (JF011E) (Nissan/Dodge) Pump Driven (31 Teeth)(.482”Thick) (.110” At Teeth)(2.375”OD)… | — |
| 554 | Part # 212554A | Drum, RE0F10A(JF011E) (Nissan/Dodge) Forward (3 Clutch)(30 Teeth)(24 Splines) (6 Bore Holes)(2.520”ID)(1.960”Thick)… | — |
| 587 | Part # 212587A | Planet, RE0F10A (JF011E) (Nissan/Dodge) Reverse (4 Gear Left Angle)(40 Spline Hub) (2.110” At Edge)(14 Teeth Gears)… | — |
| 592 | Part # 212592A | Ring Gear, RE0F10A (JF011E) (Nissan/Dodge) Front Planet (109 Teeth)(Right Angle) (30 Lugs)(.635”Thick)(5.680”OD)… | — |
| 617 | Part # 212617A | Sungear, RE0F10A (JF011E) (Nissan/Dodge) Reverse Planet (82 Teeth Right Angle) (3.685”OD)(36 Teeth Clutch Hub) 2007-Up | — |
| 670 | Part # 212670A | Shaft, RE0F10A (JF011E) (Nissan/Dodge) Input (6 3/4”Long)(20 Splines On End) (22 Splines Rear) 2007-Up | — |
| 671 | Part # 212671A | Shaft, RE0F10A (JF011E) (Nissan/Dodge) Pump Drive (3.550”Long)(.392”OD Pilot) (18 Splines & 14 Splines On End)2007-Up | — |
| 700 | Part # 212700D | Belt, RE0F10A (JF011E) (Nissan/Dodge) 2007-Up | — |
| 702 | Part # 212702-1A | Cover, RE0F10A (JF011E) (Nissan/Dodge) Driven Sprocket (Tin) (Held By 2 Nuts To #702) (.725”Thick) 2007-Up | — |
| 705 | Part # 212705A | Primary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) (7”Long)(6 3/4”OD)(38 Splines) (1.410”OD)(Right Hand Threads)… | — |
| 706 | Part # 212706A | Secondary Pulley Half, RE0F10A (JF011E)(Nissan/Dodge) Front Half (2.750”Thick) (6 11/16”OD) 2007-Up | — |
| 707 | Part # 212707A | Primary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) (Rear) (2.265”Thick)(6 3/4”OD) (1.940”ID)(5.850”Piston Pocket)… | — |
| 708 | Part # 212708A | Secondary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) Rear Half (10” Tall) (6 1/2”OD) (10 Parking Lugs)(30 Splines)… | — |
| 710 | Part # 212710A | Gear, RE0F10A (Nissan/Dodge) Driven Transfer On Secondary Pulley (30 Teeth) (One Groove)(Right Angle)(2.885”OD)… | — |
| 710 | Part # 212710B | Gear, RE0F10A (Nissan/Dodge) Driven Transfer On Secondary Pulley (29 Teeth) (No Groove)(Right Angle)(2.885”OD)… | — |
| 712 | Part # 212712A | Gear, RE0F10A (Nissan) Transfer Driven (49 Teeth)(Left Angle)(1 Center Groove) (4.590”OD)(1.275”Thick) 2007-Up | — |
| 712 | Part # 212712D | Gear, RE0F10A (JF011E)(Dodge) Transfer Driven (50 Teeth)(Left Angle Teeth)(No Groove) (4.695”OD)(1.135”Thick At Edge)… | — |
| 716 | Part # 212716A | Differential Housing, RE0F10A (JF011E)(Nissan)(1.575”OD)(8 Bolt)(5.640”Tall) 2007-09 | — |
| 720 | Part # 212720A | Ring Gear, RE0F10A (Nissan/Dodge) Differential (71 Teeth)(Right Angle)(8 Bolts) (1.380”Thick)(8.020”OD) 2007-Up | — |
| 730 | Part # 212730A | Pinion, REF010A (Nissan/Dodge) Shaft (20 Teeth) (One Groove In Center) (4.670”Long)(Right Hand Threads)(1.020”OD)… | — |
| 750 | Part # 212750A | Bell Housing, RE0F10A (Nissan) (23 Bolts To Case) (6 1/2” Top Bolts) (2:30 Open Starter)(4.255”Thick) (FOB Cast)… | — |
| 750 | Part # 212750AA | Bell Housing, RE0F10A (Nissan)(2.0L)(23 Bolts To Case)(9 3/8” Top Bolts) (2:30 Closed Starter)(3.940”Thick)(Z0A Cast)… | — |
| 750 | Part # 212750AB | Bell Housing, RE0F10A (Nissan)(21 Bolts To Case)(8 3/8” Top Bolts)(11:00 Closed Starter)… | 1 |
| 750 | Part # 212750D | Bell Housing, RE0F10A (JF011E) (Dodge) (22 Bolts To Case)(6 3/4” Top Bolts) (7:30 Closed Starter)(Cast # G00)… | 1 |
| 759 | Part # 212759ABK | Rear Cover With Pulley Assembly, RE0F10A (19 Bolt Rear Cover)(With 2 Threaded Bosses) (Cast # AFB)… | — |
| 759 | Part # 212759AK | Rear Cover W/Pulley Assembly, RE0F10A (19 Bolt Rear Cover) (W/ 2 Threaded Bosses)(Cast # AFB)(W/ 29 Teeth Transfer… | — |
| 759 | Part # 212759B | Rear Cover, RE0F10A (Dodge) 19 Bolts To Case (Cast # AMX Z0A) (2 Mounting Bosses) 2007-Up | 1 |
| 759 | Part # 212759BK | Rear Cover W/ Pulley Assembly, RE0F10A (19 Bolt Rear Cover) (W/ 2 Threaded Bosses)(Cast # AMX)… | — |
| 759 | Part # 212759C | Rear Cover, RE0F10A (Nissan) 19 Bolts To Case (Cast # FOB)(4 Mounting Bosses) 2007-Up | — |
| 759 | Part # 212759CBK | Rear Cover W/ Pulley Assembly, RE0F10A (19 Bolt Rear Cover)(W/4 Threaded Bosses)(Cast #CTR)(With 30 Teeth Transfer… | — |
| 759 | Part # 212759CCK | Rear Cover W/ Pulley Assembly, RE0F10A (19 Bolt Rear Cover)(W/6 Threaded Bosses)(Cast #AFO)(With 29 Teeth Transfer… | — |
| 759 | Part # 212759CDK | Rear Cover W/ Pulley Assembly, RE0F10A (19 Bolt Rear Cover)(W/6 Threaded Bosses)(Cast #Z0B, Z1B)… | 2 |
| 760 | Part # 212760A | Case, RE0F10A (Nissan)(19 Pan Bolts)(AFE Cast)(4 Bolt Cooler)(1 Speed Sensor 2007-Up | — |
| 760 | Part # 212760AA | Case, RE0F10A (Nissan)(2.0L)(Cast # AF0)(19 Pan Bolts)(4 Bolt Cooler)(3.570”OD) 2007-Up | 1 |
| 760 | Part # 212760D | Case, RE0F10A (JF011E)(Dodge) (18 Pan Bolts)(4 Bolt Cooler)(1 Speed Senor) 2007-Up | — |
| 769 | Part # 212769A | Housing, RE0F10A (Nissan) Cooler Filter (Aluminum) (4 Bolt)(2.530”Tall) 2007-Up | — |
| 991 | Part # 212991-4A | Shaft, RE0F10A (Nissan) Linkage (16 7/16”Long) (1 Groove)(1 Hole)(.450”/.470”OD) 2007-Up | — |
| 995 not on diagram | Part # 212995AK | Park Pawl Assembly, RE0F11A (JF015E) (Nissan/Dodge) (.315”Thick) 2007-09 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 400 not on diagram | Part # 212400A | Tech Manual, RE0F10A (JF011E) 2007-Up (CVT FWD)(Dodge, Jeep Mitsubishi, Nissan) | — |
| 488 | Part # 212488A | Plug, RE0F08A (JF009E) Pressure In Rear Cover (10mm Allen Head)(.755”Long) (1.095”/.860”OD) 2007-Up | — |
| 492 | Part # 212492A | Drain Plug, RE0F10A (JF011E) (Nissan/Dodge) In Bottom Pan (19mm Hex x .665”Long) 2007-Up | — |
| 492 | Part # 323492A | Drain Plug, RE0F10A (JF011E) (Nissan/Dodge) Partial (10mm Allen Head)(1.095” / .860” Thick) (.750”Long) In Case Below… | — |
| 494 | Part # 212494A | Dipstick Tube, RE0F10A (JF011E) (Nissan) 2 Bolts To Case (22 3/4”Long) 2007-Up | — |
| 494 | Part # 212494D | Dipstick Tube, RE0F10A (JF011E) (Dodge) 2 Bolts To Case (20 1/4”Long) 2007-Up | — |
| 495 | Part # 212495A | Bracket, RE0F10A (JF011E) (Nissan/Dodge) Valve Body To Filter Bolt (One Threaded Nut & 2 Bolt Bracket) 2007-Up | — |
| 496 | Part # 212496A | Cooler Line, RE0F10A (Nissan)(Rear)(5.050”Long) (Banjo Fitting & Barb On Other End) 2007-Up | — |
| 496 | Part # 212496B | Cooler Line, RE0F10A (Nissan) Front (11” Long) (3 Bends)(Banjo Fitting & Barb On Other End)(1 Bolt Bracket) 2007-Up | — |
| 507 | Part # 212507-6A | Plug, RE0F10A (JF011E) (Nissan/Dodge) Pressure Regulator In Pump (1.080”Thick) (10mm Allen) 2007-Up | — |
| 507 | Part # 212507-6B | Plug, RE0F10A (JF011E) (Nissan/Dodge) Pump Body Pressure (19mm Hex x .550”Thick) (.550”OD Threads) 2007-Up | — |
| 507 | Part # 323507-3A | Spring, RE0F10A (JF011E) (Nissan/Dodge) Pressure Regulator (In Pump)(1.645” Long) (.495”OD) 2007-Up | — |
| 529 | Part # 212529-1A | Bracket, RE0F10A (JF011E) (Nissan/Dodge) Conveter Reactor To Pump Assembly (.155”Thick)(2.470”Long)(2 Bolt Holes)… | — |
| 691 | Part # 212691-2A | Guide Pin, RE0F10A (JF011E) (Nissan/Dodge) Ratio Control Motor Follower (.390”OD) (6.260”Long) 2007-Up | — |
| 691 | Part # 212691A | Ratio Control Motor Follower, RE0F10A (JF011E)(Nissan/Dodge)(Aluminum)(2.745”Long) (.200”/.435”Thick At Forks) 2007-Up | — |
| 694 | Part # 212694A | Retainer, RE0F10A (JF011E) (Nissan/Dodge) Primary Bearing To Rear Cover (3 Bolt Triangle)(2.975”ID Hole) 2007-Up | — |
| 696 | Part # 212696A | Bracket, RE0F10A (JF011E) (Nissan/Dodge) Holds Secondary Pulley Bearing To Rear Cover (3 Bolt)(2.965”ID) 2007-Up | — |
| 702 | Part # 212702A | Shield, RE0F10A (JF011E) (Nissan/Dodge) Over Pump And Under Differential (Tin) (2 Bolts To Case)… | — |
| 761 | Part # 212761A | Plug Pressure Tap, RE0F08A/F08B (14mm Hex x .670”Long) 2007-Up | — |
| 795 | Part # 212795A | Nut, RE0F10A (JF011E) (Nissan/Dodge) Primary (.430”Thick) (6 Point Hex)(55mm) (1.380”ID)(Right Hand Threads) 2007-Up | — |
| 796 | Part # 212796A | Nut, RE0F10D (JF016E) Pinion (6 Point Hex)(32mm)(Right Hand Threads)(.985”ID) (.485”Thick) 2013-Up | — |
| 797 | Part # 212797A | Nut, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley (Front)(43mm)(6 Point)(.985”ID) (Right Hand Threads)(.840”Thick)… | — |
| 797 | Part # 212797B | Nut, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley (Rear)(55mm)(6 Point)(1.735”ID) (Right Hand Threads)(.323”Thick)… | — |
| 799 | Part # 323799-1A | Nut, RE0F08A/F08B(JF009E) Holds Internal Lever To End Of Shaft (14mm Hex) (RH Threads) 2007-Up | — |
| 799 | Part # 323799A | Nut, RE0F10A (JF011E) (Nissan/Dodge) Holds External Linkage To Shaft (14mm Hex) (Right Hand Threads) 2007-Up | — |
| 843 | Part # 212843A | Clip, RE0F10A (JF011E) (Nissan/Dodge) Case Connector To Case (1.300”Long)(.050”Wire) (1.080”Wide) 2007-Up | — |
| 860 | Part # 212860A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley Guide Ball Retainer (.099”Thick)(2.250”OD) 2007-Up | — |
| 860 | Part # 212860B | Snap Ring, RE0F10A(JF011E) (Nissan/Dodge) Secondary Pulley Guide Balls (Rear) (1.920”OD)(.093”Thick Wire) 2007-Up | — |
| 861 | Part # 212861A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley (1.925”OD)(.090”Thick) (Wire Type) 2007-Up | — |
| 862 | Part # 212862A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Holds Secondary Retainer (5.625”OD) (.060”Thick)(.160”Wide) 2007-Up | — |
| 865 | Part # 212865A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Primary Rear Half (2.225”OD)(.095”Thick) 2007-Up | — |
| 870 not on diagram | Part # 212870A | Replaced by 323870A | — |
| 870 not on diagram | Part # 323870A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Holds Ball Bearing To Pump Cover (.985”OD)(.022”Thick)(2 Ears) 2007-Up | — |
| 876 | Part # 212876A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) (.090”Thick) (5.795”OD)(.195”Wide) 2007-Up | — |
| 877 | Part # 212877A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Holds Forward Piston Kit In Drum (2.745”OD) (.045”Thick)(.115”Wide) 2007-Up | — |
| 878 | Part # 212878A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Foward Drum To Ring Gear (Front)(.072”Thick) (5.930”OD) 2007-Up)… | — |
| 880 not on diagram | Part # 212880A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Input Shaft To Forward Drum (1.060”OD) (.045”Thick)(.075”Wide) 2007-Up | — |
| 892 | Part # 212892A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Reverse Clutch To Case (.115”Thick) (7 3/4”OD)(.155”Wide) 2007-Up | — |
| 893 | Part # 212893A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Reverse Retainer To Case (7 1/2”OD) (.071”Thick)(.160”Wide) 2007-Up | — |
| 897 not on diagram | Part # 323897A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Driven Sprocket To Bearing (2 Eyelets) (.560”OD)(.037”Thick) 2007-Up | — |
| 899 | Part # 212899A | Snap Ring, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley Holds Bearing To Case (4.110”OD)(.040”Thick) 2007-Up | — |
| 970 | Part # 212970A | Spring, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley Piston Return (3.245”Tall) (3.300”OD) 2007-Up | — |
| 971 | Part # 212971A | Spring, RE0F10A (JF011E) (Nissan/Dodge) Primary (.240”Thick)(3.200”OD)(3.135”Long) 2007-Up | — |
| 976 | Part # 212976A | Retainer, RE0F10A (JF011E) (Nissan/Dodge) Reverse (24 Springs)(1.015”Thick)(7 1/8”OD) 2007-Up | — |
| 980 | Part # 212980A | Retainer, RE0F10A (JF011E) (Nissan/Dodge) Secondary Pulley (1.910”Thick)(5.240”OD) (2.060”ID) 2007-Up | — |
| 984 | Part # 212984A | Retainer, RE0F10A (JF011E) (Nissan/Dodge) Forward (Bonded) (5.060”OD)(2.710”ID) (.790”Thick) 2007-Up | — |
| 984 | Part # 212984BHP | Retainer, RE0F10B (JF011E) Forward (Bonded)(Balance)(Hi-Performance Blue) 2011-Up | — |
| 991 | Part # 212991-2A | Dentent Spring, RE0F10A (JF011E) (Nissan/Dodge) (3.470” Long)(.190”OD)(Roller Flat Body With Bent Leg) 2007-Up | — |
| 991 | Part # 212991-5A | Pin, RE0F10A (JF011E) (Nissan/Dodge) Holds Shaft To Case (1.285”Long)(.115”OD) 2007-Up | — |
| 991 | Part # 323991-1A | Lever, RE0F10A (JF011E) (Nissan/Dodge) Internal Linkage (2.240” Long)(.125”Thick) 2007-Up | — |
| 991 | Part # 323991-6A | Pin, RE0F10A (JF011E) (Nissan/Dodge) Holds Rooster Comb To Shaft (1” Long)(.160”OD) 2007-Up | — |
| 992 | Part # 212992A | Shift Lever, RE0F10A (JF011E) (Nissan/Dodge) External (.155”Thick)(2 Bends 2 Slots & 1 Hole)(3.095”Tall) 2007-Up | — |
| 994 | Part # 212994-1A | Actuator, RE0F10D (JF016E) Park Rod (2 Holes)(.395”ID)(2.755”Long)(.355”Thick) 2013-Up | — |
| 994 | Part # 212994A | Park Rod, RE0F10A (JF011E) (Nissan/Dodge) (6”Long)(.800”OD) (Ball On Bend) (.233”Wire Size) 2007-Up | — |
| 996 | Part # 212996A | Fitting, RE0F10A (Nissan) Cooler Line (Banjo Type)(19mm Hex x 1.520”Long) 2007-Up | — |
| 998 not on diagram | Part # 212998A | Heat Exchanger, RE0F10A (JF011E) (Square W/4 Tubes) (W/O-Rings)… | — |
| 998 not on diagram | Part # 212998B | Heat Exchanger, RE0F10A(JF011E) /RE0F10B External (Round W/2 Tubes) (With OEM Gasket)… | — |
| 998 not on diagram | Part # 212998BA | Heat Exchanger, RE0F10A (JF011E)/RE0F10B External (Round W/4 Tubes) (With OEM Gasket)… | — |
| 998 not on diagram | Part # 212998D | Cooler, RE0F10A (JF011E)(Dodge) External (Aluminum)(4 Bolt) (3.775”OD)(2.955”Tall Body) (4 Elbow Lines) 2007-Up | — |
| 999 | Part # 212999-1A | Oiler Tube, RE0F10A(JF011E) (Nissan/Dodge) In Case For Belt (1 Bolt Two Bends) (2.435”Long)(.470”OD Head) 2007-Up… | — |
| 999 | Part # 212999-6A | Oil Tube, RE0F10A (JF011E) (Nissan/Dodge) Differential To Bell (.250”OD)(6 Bends) (8 7/16”Long) 2007-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.