6L80 / 6L50 / 6L90 parts diagram
Same diagram:
6L45, 6L50, 6L90
Positions:
145 total, 123 on the diagram
Parts:
294 total, 26 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # T45002AW | Overhaul Kit, 6L45/6L50 2007-Up (For Bonded Pistons Sell 45960BK)(Transtek) | — |
| 002 not on diagram | Part # T45002CW | Overhaul Kit, 6L80/6L90 2006-Up (For Bonded Pistons Sell 45960CK)(Transtek) | — |
| 002 not on diagram | Part # T45002DW | Overhaul Kit, 6L90 2007-Up (For Bonded Pistons Sell 45960CK)(Transtek) | — |
| 004 not on diagram | Part # 45004A | Master L/Steels Kit, 6L45/6L50 2007-Up | — |
| 004 not on diagram | Part # 45004C | Master L/Steels Kit, 6L80 2006-Up (For Bonded Pistons Sell 45960CK) | — |
| 004 not on diagram | Part # 45004D | Master L/Steels Kit, 6L90 2007-Up (For Bonded Pistons Sell 45960CK) | — |
| 006 not on diagram | Part # 45006A | Master W/Steels Kit, 6L45/6L50 2007-Up | — |
| 006 not on diagram | Part # 45006C | Master W/Steels Kit, 6L80 2006-Up (For Bonded Pistons Sell 45960CK) | — |
| 006 not on diagram | Part # 45006D | Master W/Steels Kit, 6L90 2007-Up (For Bonded Pistons Sell 45960CK) | — |
| 030 not on diagram | Part # 45030A | Bushing Kit, 6L45/6L50 2007-Up | — |
| 030 not on diagram | Part # 45030C | Bushing Kit, 6L80 2006-Up | — |
| 175 not on diagram | Part # 45175AT | Ring Kit, 6L45/6L50 2007-Up | — |
| 175 not on diagram | Part # 45175CT | Ring Kit, 6L80/6L90 2006-08 | — |
| 560 not on diagram | Part # 45560B | Piston Kit, 6L50 2-6 Clutch (7 1/4”OD Bonded Piston) 2007-Up | — |
| 560 not on diagram | Part # 45560C | Piston Kit, 6L80/6L90 2-6 Clutch (7 3/4”OD Bonded Piston) 2006-Up | — |
| 564 not on diagram | Part # 45564B | Piston Kit, 6L50 4-5-6 Clutch (Bonded) 2007-Up | — |
| 564 not on diagram | Part # 45564C | Piston Kit, 6L80/6L90 4-5-6 Clutch (Bonded) 2006-Up | — |
| 565 not on diagram | Part # 45565B | Piston Kit, 6L50 1-2-3-4 & 3-5 Reverse Clutch 2007-Up | — |
| 565 not on diagram | Part # 45565C | Piston Kit, 6L80/6L90 1-2-3-4 & 3-5 Reverse Clutch 2006-07 | — |
| 567 not on diagram | Part # 45567B | Piston Kit, 6L50 Low/Reverse Clutch (.605”Thick Bonded Piston) 2007-Up | — |
| 567 not on diagram | Part # 45567C | Piston Kit, 6L80/6L90 Low/Reverse Clutch (.705”Thick Bonded Piston) 2006-Up | — |
| 777 | Part # 45777BK | Bolt Set, 6L45/6L50 Bell Housing To Case (7 Pieces) (13mm) 2007-Up | — |
| 777 | Part # 45777CK | Bolt Set, 6L80/6L90 Bell Housing To Case (8 Pieces) (15mm) 2006-Up | — |
| 778 | Part # 45778B-1 | Bolt Set, 6L45/6L50/6L80/6L90 Stator Tube To Stator Body (6 Pieces) 2006-Up | — |
| 778 | Part # 45778BK | Bolt Set, 6L45/6L50/6L80/6L90 Stator To Bell Housing (13 Pieces) (8mm) 2006-Up | — |
| 779 not on diagram | Part # 45779BK | Bolt Set, 6L45/6L50 Bottom Pan (17 Pieces) (10mm) 2007-Up | — |
| 779 not on diagram | Part # 45779CK | Bolt Set, 6L80/6L90 Bottom Pan (18 Pieces) (10mm) 2006-Up | — |
| 781 | Part # 45781BK | Bolt Set, 6L45/6L50/6L80/6L90 Extension Housing To Case (6 Pieces) 2006-Up | — |
| 791 | Part # 45791BK | Bolt Set, 6L45/6L50/6L80/6L90 Solenoid Assembly To Valve Body (6 Pieces) 2006-Up | — |
| 960 | Part # 45960CK | Piston Kit, 6L80/6L90 (Bonded) (5 Pieces) 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 420 | Part # 45420B | Solenoid Assembly, 6L45/6L50/6L80/6L90 (8 Enclosed Solenoids, 16 Pin Connector) 2006-Up… | — |
| 740 | Part # 45740B | Valve Body, 6L45/6L50 (Without Soleniod Assembly) 2007-Up | — |
| 740 | Part # 45740C | Valve Body, 6L80 (Without Solenoid Assembly)(7 Check Balls)(Two Vents)(Cast # 9404 & 9581) 2006-09 | 2 |
| 741 not on diagram | Part # 45741B-5 | Replaced by 44741G-5K | — |
| 991 | Part # 45991B-3 | Rooster Comb, 6L45/6L50/6L80/6L90 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 45410B | Neutral Safety Switch, 6L45/6L50/6L80/6L90 (6 Wire Green Connector) (6” Long Wire Harness) 2006-Up | — |
| 438 | Part # 45438B | Sensor, 6L45/6L50/6L80/6L90 Input & Output Speed (W/3 Wire Connector)(Non Stepped Output Shaft) 2006-11 | — |
| 444 | Part # 45444B | Case Connector, 6L50/6L80/6L90 (Black Plastic)(1.920” Long)(Uses 3 O-Rings) 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 45010A | Filter, 6L45 (BMW)(1/2 Metal & 1/2 Plastic) 2007-Up | — |
| 010 | Part # 45010B | Filter, 6L50 2007-Up | — |
| 010 | Part # 45010C | Filter, 6L45/6L80/6L90 2006-Up (Has A 1 1/4” Tall Bracket On Top Of Filter)(For Deep Pan)… | — |
| 010 | Part # 45010CA | Filter, 6L80/6L90 2006-Up (Has A 5/8” Tall Bracket On Top Of Filter)(For Shallow Pan)… | — |
| 010 | Part # 45010D | Filter, 6L90 2012-Up (Camaro ZL1 With 6.2L)(Has A 1” Tall Bracket On Top Of Filter)… | — |
| 016 | Part # 45016B | Screen, 6L45/6L50/6L80/6L90 Solenoid (Plastic Beaded) 2006-Up | — |
| 765 | Part # 45765B | Pan, 6L50 (17 Bolt, W/Bottom Drain Plug) 2007-Up | — |
| 765 | Part # 45765C | Pan, 6L80 (18 Bolt, W/Bottom Drain Plug)(17 1/8” Long) 2006-Up | — |
| 765 | Part # 45765D | Pan, 6L90 (18 Bolt, No Drain Plug)(18 1/2” Long) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 45070B | Seal, 6L45/6L50/6L80/6L90 Front (.380”Thk, 2.995”OD) 2006-Up | — |
| 072 not on diagram | Part # 44072 | Seal, 1000/2000 Allison Manual Lever 2000-Up | 2 |
| 074 | Part # 45074B | Seal, 6L45/6L50 2WD Extension Housing (2.430”OD)(1.730”ID) 2007-Up (Also Fits 6L50 4X4 Rear Case Seal 2007-Up) | — |
| 074 | Part # 45074C | Seal, 6L80 2WD Extension Housing (2.690”OD) 2006-Up (Also Fits 6L80 4X4 Rear Case Seal 2006-Up) | — |
| 074 | Part # 45074D | Seal, 6L80/6L90 4WD Extension Housing (3.005”OD)(2.000”ID) 2007-Up | — |
| 176 not on diagram | Part # 45176BT | Ring, 6L45/6L50/6L80/6L90 Outer Slide (.074”Thick, 4.240”OD) (Teflon) 2006-Up | — |
| 177 | Part # 45177BT | Ring, 6L45/6L50 4-5-6 Clutch Drum Input Shaft (1.155”OD) (Solid) (Teflon) 2007-Up | — |
| 177 | Part # 45177CT | Ring, 6L80/6L90 4-5-6 Clutch Drum Input Shaft (1.385”OD) (Solid) (Teflon) 2006-Up | — |
| 179 | Part # 45179BV | Ring, 6L45/6L50 Stator (.104”Thick)(With 2 Inside Diameter Ears)(Vespel) 2009-Up | — |
| 179 | Part # 45179CV | Ring, 6L80/6L90 Stator (.096”Thick, No Ears) (Vespel) (1 Piece Type Ring) 2006-08 | — |
| 300 | Part # 45300BW | Gasket, 6L45/6L50 Pan (17 Bolt) (16 3/4”Long) (Bonded Rubber) 2007-Up | — |
| 300 | Part # 45300CW | Gasket, 6L80 Pan (18 Bolt) (16 3/4”Long) (Bonded Rubber) 2006-Up | — |
| 300 | Part # 45300DW | Gasket, 6L90 Pan (18 Bolt) (18 1/8”Long) (Bonded Rubber) 2007-Up | — |
| 311 | Part # 45311B | O-Ring, 6L456L50 Bell Housing (Pump Body) To Case (9 1/2”OD) 2007-Up | — |
| 311 | Part # 45311C | O-Ring, 6L80/6L90 Bell Housing (Pump Body) To Case (10 1/2”OD) 2006-Up | — |
| 313 | Part # 45313B | O-Ring, 6L45/6L50/6L80/6L90 Outer Slide (.095”Thick, 4.240”OD) 2006-Up | — |
| 314 not on diagram | Part # 54314B | Seal, 125/125C Pump Slide (Rubber) 1980-Up | 1 |
| 315 not on diagram | Part # 54315B | Seal, 125/125C Pump Slide (Teflon) 1980-Up | 2 |
| 320 not on diagram | Part # 45320B | Gasket, 6L45/6L50 Valve Body (Bonded To Spacer Plate) 2007-Up | — |
| 320 not on diagram | Part # 45320C | Gasket, 6L80/6L90 Valve Body (Bonded To Valve Body Plate) 2006-Up | — |
| 342 | Part # 45342B | Boot Seal, 6L80/6L90 Valve Body To 2-6 & Low/Reverse Support (4 Inline Rubber Boots) 2006-Up | — |
| 348 | Part # 45348B | Lathe Cut Seal, 6L45/6L50 Extension Housing To Case (5.695”OD) 2007-Up | — |
| 348 | Part # 45348C | Lathe Cut Seal, 6L80/6L90 Extension Housing To Case (6 9/16”OD) 2006-Up | — |
| 380 | Part # 34380 | O-Ring, 4L80E Input Shaft 1991-Up | 1 |
| 380 | Part # 64380 | O-Ring, 125/125C Turbine Shaft (Goes Behind Splines) 1982-Up | 1 |
| 538 | Part # 45538B | Ring, 6L45/6L50/6L80/6L90 Pump Vane (.102”Thick, 2.625”OD, 2.355”ID) 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 45034B | Bushing, 6L45/6L50/6L80/6L90 Bell Housing (Pump Body) (Teflon Coated) (.785”Wide) (1.995”OD)(1.850”ID) 2006-Up | — |
| 036 | Part # 45036B | Bushing, 6L50 Stator (Front) (.495”Wide, 1.033”OD, .905”ID) (Babbit) 2007-Up | — |
| 036 | Part # 45036C | Bushing, 6L80/6L90 Stator (Front) (.540”Wide)(1.245”OD)(1.115”ID)(Babbit)2006-Up | — |
| 037 | Part # 45037B | Bushing, 6L50 Stator (Rear) (1.200”ID) 2007-Up | — |
| 037 | Part # 45037C | Bushing, 6L80/6L90 Stator (Rear) (1.480”ID) 2006-Up | — |
| 044 | Part # 45044B | Bushing, 6L45/6L50/6L80/6L90 2-6 & Low/Reverse Support (Front) (.415”Wide)(1.025”OD) (1.890”ID)(Babbit) 2006-Up | — |
| 044 | Part # 45044B-1 | Bushing, 6L45/6L50 2-6 & Low/Reverse Support (Rear) (.450”Wide)(1.890”OD)(1.750”ID) (Babbit) 2007-Up | — |
| 044 | Part # 45044C-1 | Bushing, 6L80/6L90 2-6 & Low/Reverse Support (Rear) (.520”Wide)(2.030”OD)(1.895”ID) (Babbit) 2006-Up | — |
| 046 | Part # 45046B | Bushing, 6L45/6L50/6L80/6L90 1-2-3-4 & 3-5 Reverse Drum (Rear) (.505”Wide)(2.190”ID) (Babbit) 2006-Up | — |
| 048 | Part # 45048B | Bushing, 6L45/6L50/6L80/6L90 4-5-6 Clutch Drum (Rear) (.690”ID) (Babbit) 2006-Up | — |
| 051 | Part # 45051B | Bushing, 6L50 3-5 Reverse & 2-6 Clutch Hub (Rear) | — |
| 051 | Part # 45051B-1 | Bushing, 6L50 3-5 Reverse & 2-6 Clutch Hub (Rear) (1.358”ID) (W/2 Grooves) (Babbit) 2007-Up | — |
| 051 | Part # 45051C | Bushing, 6L80 3-5 Reverse & 2-6 Clutch Hub (Front) (1.475”ID) (Smooth) (Babbit) 2006-Up | — |
| 051 | Part # 45051C-1 | Bushing, 6L80/6L90 3-5 Reverse & 2-6 Clutch Hub (Rear) (1.465”ID) (W/2 Grooves) (Babbit) 2006-Up | — |
| 062 | Part # 45062B | Bushing, 6L50 Output Shaft (1.200”ID) (Babbit) 2007-Up | — |
| 062 | Part # 45062C | Bushing, 6L80/6L90 Output Shaft (1.430”ID) (Babbit) 2006-Up | — |
| 064 | Part # 45064B | Replaced by 45263B | — |
| 064 | Part # 45064C | Bushing, 6L80/6L90 Case (Rear) (2.200”OD)(2.075”ID) (Teflon Coated) (Split) 2006-Up | — |
| 066 | Part # 45066B | Replaced by 45271B | — |
| 066 | Part # 45066D | Bushing, 6L90 Extension Housing (2WD) (2.340”OD)(2.338”ID) 2007-Up | — |
| 211 | Part # 45211B | Washer, 6L45/6L50/6L80/6L90 Stator To 1-2-3-4 & 3-5 Reverse Clutch Drum (.060”Thick) (3.855”OD)(3.270”ID)… | — |
| 226 | Part # 45226B | Bearing W/Races, 6L45/6L50 2-6 & Low/Reverse Support To Front Output Planet Sun Gear (.141”Thick, 2.520”OD, 1.740”ID)… | — |
| 226 | Part # 45226C | Bearing W/Races, 6L80/6L90 2-6 & Low/Reverse Support To Front Output Planet Sun Gear (.141”Thick, 2.735”OD, 1.880”ID)… | — |
| 228 | Part # 45228B | Caged Needle Bearing, 6L45/6L50/6L80/6L90 1-2-3-4 & 3-5 Reverse Drum (Front) (42 Needles, 3.405”OD, 3.250”ID) 2006-Up | — |
| 232 | Part # 45232B | Bearing W/Races, 6L45/6L50/6L80/6L90 4-5-6 Clutch Drum To Hub (.150”Thick)(2.51”OD) (1.76”ID) 2006-Up | — |
| 235 | Part # 45235B | Race, 6L45/6L50/6L80/6L90 4-5-6 Clutch Hub To 1-2-3-4 Clutch Hub (Cupped) (2.265”OD) (1.385”ID) 2006-Up | — |
| 236 | Part # 45236B | Bearing W/Race, 6L45/6L50/6L80/6L90 4-5-6 Clutch Hub To 1-2-3-4 Clutch Hub (2.465”OD) (1.100”ID) 2006-Up | — |
| 238 | Part # 45238B | Washer, 6L45/6L50/6L80 Input Planet To 4-5-6 Clutch Drum (.062”Thick, 3.540”OD, 2.985”ID) (4 Tab, 2 Tabs Are Split)… | — |
| 238 | Part # 45238D | Washer, 6L90 Input Planet To 4-5-6 Clutch Drum (.062”Thick, 3.540”OD, 2.985”ID) (6 Tab, 2 Tabs Are Split) 2007-Up | — |
| 241 | Part # 45241B | Bearing W/Races, 6L45/6L50/6L80/6L90 Input Sun Gear To 4-5-6 Clutch Drum (.190”Thick) (2.592”OD)(1.860”ID) 2006-Up | — |
| 243 | Part # 45243B | Bearing W/Races, 6L45/6L50/6L80/6L90 1-2-3-4 Clutch Hub To 3-5 Reverse Clutch Hub (.320”Thick)(2.505”OD)(1.545”ID)… | — |
| 244 | Part # 45244B | Bearing W/Races, 6L45/6L50/6L80/6L90 3-5 Reverse & 2-6 Clutch Hub To 2-6 & Low/Reverse Support… | — |
| 246 | Part # 45246B | Bearing W/Races, 6L45/6L50 Front Output Sun Gear To Rear Output Sun Gear (.160”Thick) (2.185”OD)(1.305”ID) 2007-Up | — |
| 246 | Part # 45246C | Bearing W/Races, 6L80/6L90 Front Output Sun Gear To Rear Output Sun Gear (.220”Thick) (2.480”OD, 1.430”ID) 2006-Up | — |
| 250 | Part # 45250B | Caged Needle Brg, 6L45/6L50 Output Planet (Front) (.335”Thick)(2.680”OD) (32 Needles) (Cast # 24225777) 2007-Up | 1 |
| 250 | Part # 45250C | Caged Needle Bearing, 6L80/6L90 Output Planet (Front) (.335”Thick, 3.200”OD) (37 Needles) (Cast # 24224853) 2006-Up | 1 |
| 251 | Part # 45251B | Bearing W/Races, 6L45/6L50 Output Planet To Output Shaft (.197”Thick)(2.220”OD)(1.265”ID) 2007-Up | — |
| 251 | Part # 45251C | Bearing W/Races, 6L80/6L90 Output Planet To Output Shaft (.197”Thick)(2.490”OD)(1.515”ID) 2006-Up | — |
| 260 | Part # 45260B | Bearing W/Races, 6L45/6L50/6L80/6L90 Output Shaft To Case (.152”Thick)(3.365”OD) (2.500”ID) 2006-Up | — |
| 263 not on diagram | Part # 45263B | Caged Needle Bearing, 6L45/6L50 Case To Output Shaft (.810”Wide, 2.040”OD) (Cast # DB-603-814 Torrington) 2007-Up | 1 |
| 271 not on diagram | Part # 45271B | Caged Needle Bearing, 6L45/6L50 Extension Housing (2WD W/Bolt-On Yoke) (43 Needles) (2.050”OD) (Cast # FC69886 INA)… | 1 |
| 476 | Part # 45476B | Spacer, 6L50 Output Planet Ring Gear (.275”Thick, 5 5/16”ID) 2007-Up | — |
| 476 | Part # 45476C | Spacer, 6L80/6L90 Output Planet Ring Gear (.250”Thick, 6 1/2”ID) 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 520 not on diagram | Part # 45520B | Stator, 6L50 Pump (8 7/8”Tall, 27 Splines)(Aluminum Ring Lands) 2007-Up | — |
| 520 not on diagram | Part # 45520C | Stator, 6L80/6L90 Pump (9 1/8” Tall, 36 Splines) (Steel Ring Lands) 2006-Up | — |
| 532 | Part # 45532B | Rotor, 6L45/6L50/6L80/6L90 Pump (13 Vane)(.708”Thick, 3.415”OD, 1.832”ID) 2006-Up | — |
| 533 | Part # 45533B | Vane, 6L45/6L50/6L80/6L90 Pump (.079”Thick, .706”Tall, .534”Wide) 2006-Up | — |
| 534 | Part # 45534B | Outer Slide, 6L45/6L50/6L80/6L90 Pump (.706”Thick, 3.695”ID) 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 45100B | Friction, 6L50 2-6 Clutch (.098”) (36 Internal Teeth) (7 1/4”OD) (1 Sided Friction) 2007-Up | — |
| 100 | Part # 45100C | Friction, 6L80 2-6 Clutch (.071”)(36 Teeth)(7 3/4”OD) (Waffle) 2006-Up | — |
| 100 | Part # 45100D | Friction, 6L90 2-6 Clutch (.071”) (36 Teeth) (7 3/4”OD) (Grooved) 2007-Up | — |
| 104 | Part # 45104B | Friction, 6L45/6L50 1-2-3-4 Clutch (.065”) (36 Teeth) (6 3/4”OD) 2007-Up | — |
| 104 | Part # 45104C | Friction, 6L80/6L90 1-2-3-4 Clutch (.065”) (36 Teeth) (7 1/4”OD) 2006-Up (6L80 Takes 5, 6L90 Takes 6) | — |
| 106 | Part # 45106B | Friction, 6L45/6L50 3-5 Reverse Clutch (.073”) (36 Teeth) (7 1/8”OD) 2007-Up | — |
| 106 | Part # 45106C | Friction, 6L80/6L90 3-5 Reverse Clutch (.073”) (36 Teeth) (7 11/16”OD) 2006-Up (6L80 Takes 4, 6L90 Takes 5) | — |
| 108 | Part # 45108B | Friction, 6L45/6L50 4-5-6 Clutch (.079”) (36 Internal Teeth) (1 Sided) (4.945”OD) 2007-Up | — |
| 108 | Part # 45108B-1 | Dampener Friction, 6L50 4-5-6 Clutch (1.020”Thick, 3.696”OD, 2.835”ID)(Cast # 24230475) 2007-Up | 1 |
| 108 | Part # 45108C | Friction, 6L80/6L90 4-5-6 Clutch (.063”) (36 Teeth) (5.095”OD) 2006-Up (6L80 Takes 6, 6L90 Takes 7) | — |
| 108 | Part # 45108C-1 | Dampener Friction, 6L80 4-5-6 Clutch (.885”Thick, 3.815”OD, 2.835”ID) (Cast # 24230368) 2006-Up | 1 |
| 114 | Part # 45114B | Friction, 6L50 Low/Reverse Clutch (.064”)(54 Teeth)(7”OD)(.360”Wide Friction Lining) 2007-Up | — |
| 114 | Part # 45114C | Friction, 6L80/6L90 Low/Reverse Clutch (.064”) (54 Teeth) (7”OD) (.460”Wide Friction Lining) 2006-Up… | — |
| 119 not on diagram | Part # 45119C | Friction Module, 6L80 2006-Up | — |
| 119 not on diagram | Part # 45119CS1 | Friction Module, 6L80 (Stage 1) 2006-Up | — |
| 120 | Part # 45120B | Friction, 6L45/6L50 2-6 Clutch (.084”) (24 External Teeth) (6 3/8”ID) (1 Sided Friction) 2007-Up | — |
| 120 | Part # 45120C | Steel, 6L80/6L90 2-6 Clutch (.087”) (36 Teeth) (6 5/8”ID) 2006-Up (6L80 Takes 5, 6L90 Takes 6) | — |
| 121 | Part # 45121B | Steel, 6L45/6L50 2-6 Clutch (.060”) (12 Teeth) (6 3/8”ID) (Waved) 2007-Up | — |
| 121 | Part # 45121C | Steel, 6L80/6L90 2-6 Clutch (.060”) (12 Teeth) (6 5/8”ID) (Waved) 2006-Up | — |
| 124 | Part # 45124B | Steel, 6L45/6L50 1-2-3-4 Clutch (.068”)(9 Teeth)(6 1/8”ID) 2007-Up | — |
| 124 | Part # 45124C | Steel, 6L80/6L90 1-2-3-4 Clutch (.068”)(9 Teeth)(6 3/8”ID) 2006-Up (6L80 Takes 5, 6L90 Takes 6) | — |
| 125 | Part # 45125B | Steel, 6L45/6L50 1-2-3-4 Clutch (.067”)(9 Teeth) (6 1/8”ID) (Wavy) 2007-Up | — |
| 125 | Part # 45125C | Steel, 6L80 1-2-3-4 Clutch (.053”) (9 Teeth) (6 3/8”ID) (Wavy) 2006-Up | — |
| 125 | Part # 45125D | Steel, 6L90 1-2-3-4 Clutch (.053”) (9 Wide & 18 Narrow Teeth) (6 3/8”ID) (Wavy) 2007-Up (Can Use 45125C) | — |
| 126 | Part # 45126B | Steel, 6L45/6L50 3-5 Reverse Clutch (.098”) (36 Teeth) (6 3/8”ID) 2007-Up | — |
| 126 | Part # 45126C | Steel, 6L80/6L90 3-5 Reverse Clutch (.106”) (36 Teeth) (6 3/4”ID) 2006-Up (6L80 Takes 4, 6L90 Takes 5) | — |
| 127 | Part # 45127B | Steel, 6L50 3-5 Reverse Clutch (.054”)(6 Teeth)(6 3/8”ID)(Wavy) 2007-Up | — |
| 127 | Part # 45127C | Steel, 6L80 3-5 Reverse Clutch (.054”)(12 Teeth)(6 3/8”ID)(Wavy) 2006-Up | — |
| 127 | Part # 45127D | Steel, 6L90 3-5 Reverse Clutch (.054”)(18 Teeth)(6 3/8”ID)(Wavy) 2007-Up | — |
| 128 | Part # 45128B | Friction, 6L45/6L50 4-5-6 Clutch (.079”) (36 External Teeth) (1 Sided) (4.130”ID) 2007-Up | — |
| 128 | Part # 45128C | Steel, 6L80/6L90 4-5-6 Clutch (.087”) (36 Teeth) (4.255”ID) 2006-Up (6L80 Takes 6, 6L90 Takes 7) | — |
| 129 | Part # 45129B | Steel, 6L45/6L50 4-5-6 Clutch (.075”) (12 Teeth) (4.135”ID) (Wavy) 2007-Up | — |
| 129 | Part # 45129C | Steel, 6L80/6L90 4-5-6 Clutch (.063”)(12 Teeth) (4.250”ID) (Wavy) 2006-Up | — |
| 134 | Part # 45134B | Steel, 6L45/6L50 Low/Rev Clutch (.068”)(24 Teeth) (6 3/16”ID) 2007-Up | — |
| 134 | Part # 45134C | Steel, 6L80/6L90 Low/Reverse Clutch (.068”) (36 Teeth) (6”ID) 2006-Up (6L80 Takes 5, 6L90 Takes 6) | — |
| 135 | Part # 45135B | Steel, 6L45/6L50 Low/Reverse Clutch (.068”) (8 Teeth) (6 3/16”ID) (Waved) 2007-Up | — |
| 135 | Part # 45135C | Steel, 6L80/6L90 Low/Reverse Clutch (.085”) (18 Teeth) (6”ID) (Waved) 2006-Up | — |
| 139 not on diagram | Part # 45139C | Steel Module, 6L80 2006-Up | — |
| 140 | Part # 45140B | Pressure Plate, 6L45/6L50 2-6 Clutch (.195”) (24 Teeth) (6 3/8”ID) (Stepped) 2007-Up | — |
| 140 | Part # 45140C | Pressure Plate, 6L80/6L90 2-6 Clutch (.120”)(24 Teeth)(6 5/8”ID)(Stepped) 2006-Up | — |
| 144 | Part # 45144B | Pressure Plate, 6L45/6L50 1-2-3-4 Clutch (Top) (.280”) (9 Teeth) (6 1/8”ID) 2007-Up | — |
| 144 | Part # 45144C | Pressure Plate, 6L80/6L90 1-2-3-4 Clutch (.315”) (9 Teeth) (6 3/8”ID) 2006-Up | — |
| 146 | Part # 45146B | Pressure Plate, 6L45/6L50 3-5 Reverse Clutch (.323”) (36 Teeth) (6 3/8”ID) 2007-Up | — |
| 146 | Part # 45146C | Pressure Plate, 6L80/6L90 3-5 Reverse Clutch (.430”) (36 Teeth) (6 3/4”ID) 2006-Up | — |
| 148 | Part # 45148B | Pressure Plate, 6L45/6L50 4-5-6 Clutch (.198”) (Stepped) (36 Teeth)(4.133”ID) 2007-Up | — |
| 148 | Part # 45148B-1 | Pressure Plate/Retainer, 6L50 4-5-6 Clutch (.150”Thick) (36 Teeth)(2.605”ID) 2007-Up | — |
| 148 | Part # 45148C | Pressure Plate, 6L80/6L90 4-5-6 Clutch (.157”) (Stepped) (36 Teeth)(4.255”ID) 2006-Up | — |
| 148 | Part # 45148C-1 | Pressure Plate/Retainer, 6L80/6L90 4-5-6 Clutch (.069”Thick) (36 Teeth)(2.605”ID) 2006-Up | — |
| 154 | Part # 45154B | Pressure Plate, 6L45/6L50 Low/Reverse Clutch (.312”) (24 Teeth) (6 3/16”ID) 2007-Up | — |
| 154 | Part # 45154C | Pressure Plate, 6L80/6L90 Low/Reverse Clutch (.230”) (36 Teeth) (6”ID) (Stepped) 2006-Up | — |
| 956 | Part # 45956B | Piston/Housing, 6L45/6L50 1-2-3-4 Clutch (1.590”Thick, 6 5/8”OD, 3 1/8”ID) (Aluminum) 2007-Up | — |
| 956 | Part # 45956C | Piston/Housing, 6L80/6L90 1-2-3-4 Clutch (1.508”Thick, 7 1/8”OD, 3 1/8”ID) (Aluminum) 2006-Up | — |
| 960 | Part # 45960B | Piston, 6L50 2-6 Clutch (.830”Thick, 7 1/4”OD, 6 3/16”ID) (Bonded) (20 Notches) 2007-Up | — |
| 960 | Part # 45960C | Piston, 6L80/6L90 2-6 Clutch (.875”Thick, 7 15/16”OD, 6 1/2”ID) (Bonded) (18 Notches) 2006-Up | — |
| 962 | Part # 45962B | Piston, 6L45/6L50 1-2-3-4 Clutch (1.400”Thick, 6 5/8”OD, 3.030”ID) (Aluminum) (Cast # 24241073) 2007-Up | 1 |
| 962 | Part # 45962C | Piston, 6L80/6L90 1-2-3-4 Clutch (1.415”Thick, 7 1/8”OD, 3.030”ID) (Aluminum) (Cast # 24238700) 2006-Up | 1 |
| 964 | Part # 45964B | Piston, 6L45/6L50 4-5-6 Clutch (.965”Thick, 4.600”OD, 1.335”ID) (Bonded) 2007-Up | — |
| 964 | Part # 45964C | Piston, 6L80/6L90 4-5-6 Clutch (.805”Thick, 4.960”OD, 1.445”ID)(Bonded) 2006-Up | — |
| 965 | Part # 45965B | Piston, 6L45/6L50 3-5 Reverse Clutch (1.400”Tall, 7 1/4”OD, 5.150”ID) (Cast # 24238561) 2007-Up | 1 |
| 965 | Part # 45965C | Piston, 6L80/6L90 3-5 Reverse Clutch (1.500”Tall, 7 3/4”OD, 5.600”ID) (Cast # 24238697) 2006-Up | 1 |
| 967 | Part # 45967B | Piston, 6L45/6L50 Low/Reverse Clutch (.605”Thick, 7”OD, 4 5/8”ID) (Bonded) (8 Notches) 2007-Up | — |
| 967 | Part # 45967C | Piston, 6L80/6L90 Low/Reverse Clutch (.705”Thick, 7”OD, 3 3/8”ID) (Bonded) (12 Notches) 2006-Up | — |
| 970 | Part # 45970B | Spring, 6L45/6L50 2-6 Clutch Return (.053”Thick, 7 1/4”OD) (20 Fingers) 2007-Up | — |
| 970 | Part # 45970C | Spring, 6L80/6L90 2-6 Clutch Return (.062”Thick, 7 15/16”OD) (18 Fingers) 2006-Up | — |
| 972 | Part # 45972B | Spring, 6L45/6L50 1-2-3-4 Clutch Return (.061”Thick, 5.210”OD) (12 Fingers) 2007-Up | — |
| 972 | Part # 45972C | Spring, 6L80/6L90 1-2-3-4 Clutch Return (.061”Thick, 5.405”OD) (12 Fingers) 2006-Up | — |
| 974 | Part # 45974B | Spring, 6L45/6L50 4-5-6 Clutch Return (.068”Thick, 4.335”OD) (10 Fingers) 2007-Up | — |
| 974 | Part # 45974C | Spring, 6L80/6L90 4-5-6 Clutch Return (.075”Thick, 4.710”OD) (10 Fingers) 2006-Up | — |
| 975 | Part # 45975B | Spring, 6L45/6L50 3-5 Reverse Clutch (6 3/8”OD) (16 Fingers) 2007-Up | — |
| 975 | Part # 45975C | Spring, 6L80/6L90 3-5 Reverse Clutch (6 13/16”OD) (16 Fingers) 2006-Up | — |
| 977 | Part # 45977B | Spring, 6L50 Low/Reverse Clutch Return (.062”Thick, 5.652”OD) (16 Fingers) 2007-Up | — |
| 977 | Part # 45977C | Spring, 6L80/6L90 Low/Reverse Clutch Return (.069”Thick, 5.335”OD) (12 Fingers) 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 554 | Part # 45554B | Drum, 6L45/6L50 4-5-6 Clutch W/Shaft (5 Clutch) (13 5/8”Long)(5.405”OD) (3.960”Wide) (W/89 Teeth Ring Gear) 2007-Up | — |
| 554 | Part # 45554C | Drum, 6L80 4-5-6 Clutch W/Shaft (6 Clutch) (13 5/8”Long)(5.640”OD) (3.750”Wide) (W/94 Teeth Ring Gear) 2006-Up | — |
| 554 | Part # 45554D | Drum, 6L90 4-5-6 Clutch W/Shaft (7 Clutch) (13 3/4”Long)(5.640”OD) (3.810”Wide) (W/94 Teeth Ring Gear) 2007-Up | — |
| 555 | Part # 45555B | Drum, 6L45/6L50 1-2-3-4 & 3-5 Reverse Clutch (7 3/4”OD) 2007-Up | — |
| 555 | Part # 45555C | Drum, 6L80 1-2-3-4 & 3-5 Reverse Clutch (8 5/16”OD, 4.555”Tall) 2006-Up | — |
| 555 | Part # 45555D | Drum, 6L90 1-2-3-4 & 3-5 Reverse Clutch (8 5/16”OD, 4.930”Tall)(.170” From Top Of Drum To Top Of Snap Ring Groove)… | — |
| 574 | Part # 45574B | Hub W/Shaft, 6L50 4-5-6 Clutch (9”Long, 4.020”OD)(.855”OD Shaft) 2007-Up | — |
| 574 | Part # 45574C | Hub W/Shaft, 6L80/6L90 4-5-6 Clutch (9 1/8”Long, 4.175”OD) (.950”OD Shaft) 2006-Up | — |
| 575 | Part # 45575B | Hub W/Hollow Shaft, 6L50 1-2-3-4 Clutch (10 3/8”Tall)(6”OD) 2007-Up | — |
| 575 | Part # 45575C | Hub W/Hollow Shaft, 6L80 1-2-3-4 Clutch (11”Tall)(6 3/16”OD) 2006-Up | — |
| 578 | Part # 45578B | Hub W/Hollow Shaft, 6L45/6L50 3-5 Reverse & 2-6 Clutch (7 5/8”Tall)(6 3/16”OD) 2007-Up | — |
| 578 | Part # 45578C | Hub W/Hollow Shaft, 6L80 3-5 Reverse & 2-6 Clutch (8”Tall)(6 1/2”OD) 2006-Up | — |
| 582 | Part # 45582B | Planet, 6L45/6L50 Input (4 Gear, Steel) (20 Teeth Pinions) (4.130”OD) 2007-Up | — |
| 582 | Part # 45582C | Planet, 6L80 Input (4 Gear, Steel) (22 Teeth Pinions) (4.480”OD) 2006-Up | — |
| 582 | Part # 45582D | Planet, 6L90 Input (6 Gear, Steel) (22 Teeth Pinions) (4.480”OD) 2007-Up | — |
| 584 | Part # 45584B | Planet, 6L50 Output (4.740”Thick Through Center, 5.040”OD) (34 Outer Lugs) 2007-Up | — |
| 584 | Part # 45584C | Planet, 6L80 Output (4.675”Thick Through Center, 6 5/16”OD) (No Outer Lugs) 2006-Up | — |
| 584 | Part # 45584D | Planet, 6L90 Output (5.195”Thick Through Center, 6 5/16”OD) (No Outer Lugs) 2007-Up | — |
| 594 | Part # 45594B | Ring Gear, 6L50 Output Planet (Front) (97 Teeth) (.885”Thick) 2007-Up | — |
| 594 | Part # 45594B-1 | Ring Gear, 6L50 Output Planet (Rear) (97 Teeht) (1.450”Thick) 2007-Up | — |
| 594 | Part # 45594C | Ring Gear, 6L80 Output Planet (Front) (92 Teeht) (.830”Thick) 2006-Up | — |
| 594 | Part # 45594C-1 | Ring Gear, 6L80 Output Planet (Rear) (92 Teeth) (1.260”Thick) 2006-Up | — |
| 594 | Part # 45594D | Ring Gear, 6L90 Output Planet (Front) (92 Teeth) (.945”Thick) 2007-Up | — |
| 594 | Part # 45594D-1 | Ring Gear, 6L90 Output Planet (Rear) (92 Teeth) (1.600”Thick) 2007-Up | — |
| 612 | Part # 45612B | Sun Gear, 6L45/6L50 Input Planet (49 Teeth, 1.025”Thick, 2.450”OD) 2007-Up | — |
| 612 | Part # 45612C | Sun Gear, 6L80/6L90 Input Planet (50 Teeth, 1.045”Thick, 2.540”OD) 2006-Up | — |
| 614 | Part # 45614B | Sun Gear, 6L50 Output Planet (Front) (47 Teeth) (1 Wide & 1 Narrow Groove) (2.570”OD) 2007-Up | — |
| 614 | Part # 45614B-1 | Sun Gear, 6L50 Output Planet (Rear) (37 Teeth) (2 Narrow Grooves) (2.050”OD) 2007-Up | — |
| 614 | Part # 45614C | Sun Gear, 6L80/6L90 Output Planet (Front) (46 Teeth) (1 Wide Groove) (3.115”OD) 2006-Up | — |
| 614 | Part # 45614C-1 | Sun Gear, 6L80 Output Planet (Rear) (35 Teeth) (1 Narrow Groove) (1.275”Thick, 2.500”OD) 2006-Up | — |
| 614 | Part # 45614D-1 | Sun Gear, 6L90 Output Planet (Rear) (35 Teeth) (2 Narrow Grooves) (1.720”Thick, 2.500”OD) 2007-Up | — |
| 632 | Part # 45632B | Support, 6L45/6L50 2-6 & Low/Reverse (6 Clutch Low/Reverse) (5.555”Tall At The Edge) (Aluminum) 2007-Up | — |
| 632 | Part # 45632C | Support, 6L80 2-6 & Low/Reverse (5 Clutch Low/Reverse) (5.035”Tall At The Edge) (Aluminum) 2006-Up | — |
| 632 | Part # 45632D | Support, 6L90 2-6 & Low/Reverse (6 Clutch Low/Reverse) (5.315”Tall At The Edge) (Aluminum) 2007-Up | — |
| 644 not on diagram | Part # 45644B | Sprag Assembly, 6L50 Low (30 Element) (54 Teeth) 2007-Up | — |
| 644 not on diagram | Part # 45644C | Sprag Assembly, 6L80 Low (38 Element) (54 Teeth) 2006-Up | — |
| 644 not on diagram | Part # 45644D | Sprag Assembly, 6L90 Low (30 Element) (54 Teeth) 2007-Up | — |
| 678 | Part # 45678B | Output Shaft, 6L50 2WD (11” Overall Length) (6 1/4”OD Shell)(44 Splines)(Bolt On Type Yoke) 2007-Up | — |
| 678 | Part # 45678C | Output Shaft, 6L80 2WD (15 1/8” Overall Length) (7 1/2”OD Shell)(30 Splines) 2006-11 | — |
| 678 | Part # 45678CB | Output Shaft, 6L80 4x4 (32 Splines) 2006-11 | — |
| 678 | Part # 45678CC | Output Shaft, 6L80 (11 3/8” Long)(5 3/4”Long Splines)(7 1/2”OD Shell)(32 Splines) (.475” Park Gear) 2006-11 | — |
| 678 | Part # 45678D | Output Shaft, 6L90 4X4 (9 1/4” Overall Length) (7 1/2”OD Shell)(29 Splines)(36 Holes For Output Sensor) 2007-11 | — |
| 750 | Part # 45750B | Bell Housing, 6L50 (Pump Body) (5 1/8” Top Bolts) (Cast # 24242678) (W/Rotor Kit) 2007-Up | 1 |
| 750 | Part # 45750BA | Bell Housing, 6L50 (Pump Body) (Cast # 24226870) (W/Rotor Kit) 2007-Up | 1 |
| 750 | Part # 45750C | Bell Housing, 6L80 (Corvette) Rear Half (Pump Body) (2 5/8”Thick) (Cast # 24236119) (W/Rotor Kit) 2006-Up | 1 |
| 750 | Part # 45750C-1 | Bell Housing, 6L80 (Corvette) Front Half (Cast # 24236121) 2006-Up | 1 |
| 750 | Part # 45750D | Bell Housing, 6L90 (Chevy V-8) (Pump Body) (Cast # 24239892) (W/Rotor Kit) 2007-Up | 1 |
| 760 | Part # 45760B | Case, 6L50 (17 Pan Bolts) (16 3/4” From Bell To Extension Housing) (Has A Linkage Seal On Each Side) 2007-Up | — |
| 760 | Part # 45760C | Case, 6L80 (18 Pan Bolts) (16 5/8” From Bell To Extension Housing)(No Rear Seal And Drain Back Holes Are Open) 2006-Up | — |
| 760 | Part # 45760D | Case, 6L90 (18 Pan Bolts) (17 3/4” From Bell To Extension Housing) 2007-Up (Has Rear Seal)(Drain Back Holes Are… | — |
| 770 | Part # 45770C | Extension Housing, 6L80 4X4 (8 Bolts To Transfer Case) (Aluminum) (1 5/8”Thick) (Cast # 24226019) 2006-Up | 1 |
| 770 | Part # 45770CA | Extension Housing, 6L80 4x4 (6 Bolts To Transfer Case)(Aluminum)(3 9/16”Thick) (Cast # 24237397) 2006-Up | 1 |
| 770 | Part # 45770CJ | Extension Housing, 6L80 2WD (5 7/8” Long) (2 Bolt Mount)(2.690”OD Rear Seal) 2006-Up | — |
| 841 | Part # 45841B | Yoke, 6L45/6L50 Drive Shaft (3 Hole, 1.670”OD, 2.190”Tall) 2007-Up | — |
| 991 | Part # 45991B-4 | Manual Shaft, 6L45/6L50 (10 3/16” Long) 2007-Up | — |
| 991 | Part # 45991C-4 | Manual Shaft, 6L80/6L90 (3 7/8” Long) 2006-Up | — |
| 995 | Part # 45995B | Park Pawl Assembly, 6L45/6L50/6L80 (.350”Thick Park Pawl) 2006-Up | — |
| 995 | Part # 45995D | Park Pawl Assembly, 6L90 (.435”Thick Park Pawl) 2007-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 535 | Part # 45535B | Pin, 6L45/6L50/6L80/6L90 Pump Slide Pivot Pin (Spring # 540 Locks Onto This Pin) 2006-Up | — |
| 536 | Part # 45536B | Spring, 6L45/6L50/6L80/6L90 Outer Pump Slide (.675”OD, 1.900”Long) 2006-Up | — |
| 539 | Part # 45539B | Rotor Guide, 6L45/6L50/6L80/6L90 Pump (13 Vane, 12 Openings) (1.845”ID) 2006-Up | — |
| 540 | Part # 45540B | Spring, 6L45/6L50/6L80/6L90 Pump Slide Pivot Spring (Locks Onto The Pivot Pin) (.317”Long) (.275”OD) 2006-Up | — |
| 548 | Part # 45548B | Apply Ring, 6L45/6L50 3-5 Reverse Clutch (1.815”Thick, 7 1/8”OD) (Cast # 225748) 2007-Up | 1 |
| 548 | Part # 45548C | Apply Ring, 6L80 3-5 Reverse Clutch (1.840”Thick, 7 5/8”OD) (Cast # 24633) 2006-Up | 1 |
| 548 | Part # 45548D | Apply Ring, 6L90 3-5 Reverse Clutch (2.000”Thick, 7 5/8”OD) (Cast # 26735) 2007-Up | 1 |
| 798 | Part # 45798B | Nut, 6L45/6L50 Yoke To Output Shaft (30mm) 2007-Up | — |
| 861 | Part # 45861B | Snap Ring, 6L45/6L50 Holds 2-6 Clutch Pressure Plate In 2-6 & Low/Reverse Support (.094”Thick)(7 7/8”OD) 2007-Up | — |
| 861 | Part # 45861C | Snap Ring, 6L80/6L90 Holds 2-6 Clutch Pressure Plate In 2-6 & Low/Reverse Support (.080”Thick, 8 3/8”OD) 2006-Up | — |
| 862 | Part # 45862B | Snap Ring, 6L45/6L50 Holds 2-6 Clutch Return Spring In (.117”Thick, 8”OD, .202”Wide) (Beveled) 2007-Up | — |
| 862 | Part # 45862C | Snap Ring, 6L80/6L90 Holds 2-6 Clutch Return Spring In (.117”Thick 8 3/4”OD, .154”Wide) (Beveled) 2006-Up | — |
| 872 | Part # 45872B | Snap Ring, 6L45/6L50/6L80/6L90 Holds 1-2-3-4 Clutch Piston In Drum (.066”Thick, 3.175”OD) 2006-Up | — |
| 873 | Part # 45873B | Snap Ring, 6L45/6L50 Holds 1-2-3-4 Clutch Pressure Plate In (.134”Thick, 8 1/4”OD) 2007-Up | — |
| 873 | Part # 45873C | Snap Ring, 6L80/6L90 Holds 1-2-3-4 Clutch Pressure Plate In (.118”Thick, 8 3/4”OD) 2006-Up | — |
| 873 | Part # 45873CB | Snap Ring, 6L80/6L90 Holds 1-2-3-4 Clutch Pressure Plate In (.129”Thick, 8 3/4”OD) 2006-Up | — |
| 874 | Part # 45874B | Snap Ring, 6L45/6L50/6L80/6L90 Holds 1-2-3-4 Clutch Spring Retainer In Drum (.047”Thick, 2.675”OD) 2006-Up | — |
| 875 | Part # 45875B | Snap Ring, 6L50/6L80/6L90 Holds Dampener In 4-5-6 Hub (.059”Thick, 4.065”OD) (Waved) 2006-Up | — |
| 876 | Part # 45876B | Snap Ring, 6L45/6L50 Holds 4-5-6 Clutch Pressure Plate In (.134”Thick, 5.455”OD) 2007-Up | — |
| 876 | Part # 45876C | Snap Ring, 6L80/6L90 Holds 4-5-6 Clutch Pressure Plate In (Selective) (5.730”OD) 2006-Up | — |
| 877 | Part # 45877B | Snap Ring, 6L45/6L50 Holds 4-5-6 Clutch Bonded Retainer In Drum (.077”Thick, 1.240”OD) (W/2 Eyelets) 2007-Up | — |
| 877 | Part # 45877C | Snap Ring, 6L80/6L90 Holds 4-5-6 Clutch Bonded Retainer In Drum (.077”Thick, 1.370”OD) (W/2 Eyelets) 2006-Up | — |
| 878 | Part # 45878B | Snap Ring, 6L45/6L50 Holds 3-5 Reverse Clutch Pressure Plate In (.107”Thick, 8 1/4”OD) 2007-Up | — |
| 878 | Part # 45878C | Snap Ring, 6L80/6L90 Holds 3-5 Reverse Clutch Pressure Plate In (.087”Thick, 8 3/8”OD) 2006-Up (Green) | — |
| 878 | Part # 45878CB | Snap Ring, 6L80/6L90 Holds 3-5 Reverse Clutch Pressure Plate In (.097”Thick, 8 3/8”OD) 2006-Up (Purple) | — |
| 883 | Part # 45883B | Snap Ring, 6L45/6L50 Holds 2-6 & Low/Reverse Support In Case (.140”Thick, 8 5/8”OD) (With 2 Eyelets) 2007-Up | — |
| 883 | Part # 45883C | Snap Ring, 6L80/6L90 Holds 2-6 & Low/Reverse Support In Case (.160”Thick, 9 1/8”OD) (With 2 Eyelets) 2006-Up | — |
| 884 | Part # 45884B-1 | Snap Ring, 6L45/6L50 Holds Low Sprag Assembly To 2-6 & Low/Reverse Support (.059”Thick, 3.610”OD) 2007-Up | — |
| 884 | Part # 45884C | Snap Ring, 6L80/6L90 Holds Low Sprag To Outer Race (.046”Thick, 4.780”OD) 2006-Up | — |
| 884 | Part # 45884C-1 | Snap Ring, 6L80/6L90 Holds Low Sprag To 2-6 & Low/Reverse Support (.059”Thick) (3.075”OD) 2006-Up | — |
| 885 | Part # 45885B | Snap Ring, 6L45/6L50 Holds Low/Reverse Clutch Pressure Plate In Support (.108”Thick) (7 3/8”OD) 2007-Up | — |
| 885 | Part # 45885C | Snap Ring, 6L80/6L90 Holds Low/Reverse Clutch Pressure Plate In Support (.092”Thick, 7 7/8”OD) 2006-Up | — |
| 889 | Part # 45889B | Snap Ring, 6L45/6L50 Holds Front Output Ring Gear To Output Shaft (Both Sides) (.097”Thick, 6 3/8”OD) 2007-Up | — |
| 889 | Part # 45889C | Snap Ring, 6L80/6L90 Holds Front Output Ring Gear To Output Shaft (Both Sides) (.083”Thick, 7 11/16”OD) 2006-Up | — |
| 898 | Part # 45898B | Snap Ring, 6L45/6L50/6L80/6L90 Holds Front Seal To Bell Housing (.060”Thick, 3.180”OD) 2006-Up | — |
| 982 | Part # 45982B | Retainer/Piston, 6L45/6L50 1-2-3-4 Clutch Spring (Bonded) (5.305”OD, 2.705”ID) 2007-Up | — |
| 982 | Part # 45982C | Retainer/Piston, 6L80/6L90 1-2-3-4 Clutch Spring (Bonded) (5.435”OD, 2.705”ID) 2006-Up | — |
| 984 | Part # 45984B | Retainer/Piston, 6L45/6L50 4-5-6 Clutch Return Spring (Bonded) (.880”Thick)(4.365”OD) (1.100”ID) 2007-Up | — |
| 984 | Part # 45984C | Retainer/Piston, 6L80/6L90 4-5-6 Clutch Return Spring (Bonded) (.810”Thick, 4.760”OD, 1.200”ID) 2006-Up | — |
| 991 | Part # 45991B-2 | Detent Spring, 6L45/6L50/6L80/6L90 Rooster Comb (6 1/4”Long) 2006-Up | — |
| 994 | Part # 45994B | Park Rod Actuator, 6L45/6L50 (12 1/2”Long) 2007-Up | — |
| 994 | Part # 45994C | Park Rod Actuator, 6L80 (12 3/4”Long) 2006-Up | — |
| 994 | Part # 45994D | Park Rod Actuator, 6L90 (14” Long) 2007-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.