TH125C parts diagram
Transmission page:
Positions:
216 total, 146 on the diagram
Parts:
448 total, 319 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 64000C | Paper & Rubber Kit, 125/125C Combo 1980-Up | — |
| 002 not on diagram | Part # 64002C | Overhaul Kit, 125/125C Combo 1980-Up | — |
| 004 not on diagram | Part # 64004 | Master L/Steels, 125/125C 1980-E84 | — |
| 004 not on diagram | Part # 64004B | Master L/Steels, 125C L1984-Up | — |
| 006 not on diagram | Part # 64006 | Master W/Steels, 125/125C 1980-E84 | — |
| 006 not on diagram | Part # 64006B | Master W/Steels, 125C L1984-Up | — |
| 011 not on diagram | Part # 64011 | Filter Kit, 125/125C 1980-Up | — |
| 030 not on diagram | Part # 64030 | Bushing Kit, 125/125C 1980-Up | — |
| 175 not on diagram | Part # 64175 | Ring Kit, 125/125C (Metal) 1980-Up | — |
| 175 not on diagram | Part # 64175T | Ring Kit, 125/125C (Teflon) 1980-Up | — |
| 200 not on diagram | Part # 64200 | Washer Kit, 125/125C (Less Selectives) 1980-Up | 1 |
| 201 not on diagram | Part # 64201A | Bearing Kit, 125/125C 1980-Up | — |
| 204 not on diagram | Part # 64204A | Repair Kit, 125/125C Front Planet (4 Brass, 4 Batwing, & 8 Steel Round Washers) | 1 |
| 204 not on diagram | Part # 64204AA | Repair Kit, 125/125C Front Planet (8 Brass Round Washers) 1980-Up | — |
| 204 not on diagram | Part # 64204B | Repair Kit, 125/125C Rear Planet (8 Brass & 8 Steel Washers) 1980-Up | 1 |
| 204 not on diagram | Part # 64204C | Repair Kit, 125 Final Drive Planet (8 Brass & 8 Steel Washers)(Small) 1980-81 | 1 |
| 204 not on diagram | Part # 64204D | Repair Kit, 125C Final Drive Planet (8 Brass & 8 Steel Washers)(Large) 1982-Up | 1 |
| 293 | Part # S64293-10 | Shim Set, 125 / 125C Differential To Case (10 Per Set) (Sonnax) | 1 |
| 369 not on diagram | Part # 64369K | Seal Kit, 125C Speed-O Sensor (Gasket & 2 O-Rings) 1982-Up | — |
| 386 not on diagram | Part # 64386K | Seal Kit, 125/125C Low/Reverse Clutch Oil Pipe (O-Ring, Washer, & Seal/Cup Plug) | — |
| 390 not on diagram | Part # 64390 | External Seal Kit, 125/125C | — |
| 441 not on diagram | Part # 64441 | Element Plate Kit, 125/125C Thermostatic Element (Goes on Channel Plate) 1980-Up | 1 |
| 445 | Part # 64445K | Repair Kit, 125C External Wire Harness (Square 4 Prong)(Plugs Into Connector) 1989-Up | — |
| 445 | Part # 84445K | Repair Kit, 125C External Wire Harness (Square 5 Prong)(Plugs Into Connector) 1983-Up | — |
| 531 not on diagram | Part # 64531 | Rotor Kit, 125 (20 Spline Rotor)(.708”) 1980-81 | — |
| 531 not on diagram | Part # 64531B | Rotor Kit, 125C (15 Spline Rotor)(.708”) 1982-Up | — |
| 531 not on diagram | Part # 64531BK | Rotor Kit Conversion, 125 (Contains; Pump Shaft, 15 Spline Rotor, & Vanes) (Converts 20 Spline to 15 Spline Rotor)… | — |
| 533 | Part # 64533K | Vane & Ring Kit, 125/125C 1980-Up | — |
| 564 not on diagram | Part # 64564 | Piston Kit, 125/125C Forward Drum 1980-Up | — |
| 565 not on diagram | Part # 64565 | Piston Kit, 125/125C Direct Drum 1980-Up | — |
| 567 not on diagram | Part # 64567 | Piston Kit, 125/125C Low/Reverse Clutch (Center Support)(Steel Piston) 1980-92 | 1 |
| 567 not on diagram | Part # 64567A | Piston Kit, 125C Low/Reverse Clutch (Center Support)(Aluminum Piston) 1993-Up | — |
| 741 not on diagram | Part # A64741SK | Valve Kit, 125/125C 2-3 Shift (W/Spring) 1980-Up | — |
| 741 not on diagram | Part # S64741RK | Boost Valve Kit, 125C TV & Reverse (Sonnax) 1982-Up | 1 |
| 952 | Part # 64952K | Valve & Spring Kit, 125/125C 2-3 Shift Fix (Accumulator) 1980-Up | — |
| 999 not on diagram | Part # 64999 | Oil Tube Set, 125/125C 1980-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 64529 | Converter Reactor, 125 1980-81 | 1 |
| 529 | Part # 64529A | Converter Reactor, 125C 1982-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 165 not on diagram | Part # S64165 | Valve Body Kit, 125/125C(Superior) 1980-Up | 1 |
| 165 not on diagram | Part # T64165 | Valve Body Kit, 125/125C(Transgo)(Corrects/Prevents 3-2 Clunk, Lock-Up Shudder, Long Soft/No 2-3 Shift) 1980-Up | — |
| 425 | Part # 64425A | Solenoid, 125C TCC (1 Wire to Case Connector)(1 Blade Connector) 1982-Up | 1 |
| 425 | Part # 64425B | Solenoid, 125C TCC (2 Wire to Case Connector)(2 Blade Connector) 1982-Up | 1 |
| 425 | Part # 64425C | Solenoid, 125C TCC (4 Wire to Case Connector)(3 Blade, 1 Round) 1982-Up | 1 |
| 425 | Part # 64425D | Solenoid, 125C TCC (4 Wire to Case Connector)(4 Blade Connector) 1982-Up | 1 |
| 425 | Part # 64425E | Solenoid, 125C TCC (3 Wire to Case Connector)(2 Blade Connector) 1982-Up | 1 |
| 425 | Part # 64425G | Solenoid, 125C TCC (Pt, Lg 1, W/Ground) 1982-Up | 1 |
| 425 | Part # 64425H | Solenoid, 125C TCC (3 Wire to Case Connector)(4 Blade Connector) 1982-Up | 1 |
| 425 | Part # 84425 | Solenoid, 125C TCC (Universal) 1982-Up (Rostra) | 2 |
| 425 | Part # T84425 | Solenoid, 125C TCC (Universal) 1982-Up (Teckpak) | 1 |
| 425 | Part # T84425K | Solenoid, 125C TCC (6 Pack With Free Posi-Twist Travel Pack) 1982-Up (Teckpak) | 1 |
| 680 not on diagram | Part # 64680 | Governor, 125 1980-81 | 1 |
| 680 not on diagram | Part # 64680A | Governor, 125C Electronic (13 Tooth Pick-Up) 1982-Up | 1 |
| 680 not on diagram | Part # 64680B | Governor, 125C Electronic (14 Tooth Pick-Up) 1982-Up | 1 |
| 680 not on diagram | Part # 64680C | Governor, 125C Electronic ( 8 Tooth Pick-Up) 1982-Up | — |
| 680 not on diagram | Part # 64680D | Governor, 125C Electronic (15 Tooth Pick-Up) 1982-Up | — |
| 680 not on diagram | Part # 64680E | Governor, 125C Electronic (11 Tooth Pick-Up) 1982-Up | — |
| 741 not on diagram | Part # 64741M-1 | Valve, 125 Manual 1980-81 | 1 |
| 741 not on diagram | Part # 64741MA-1 | Valve, 125C Manual 1982-Up | — |
| 741 not on diagram | Part # A64741S-1 | Valve, 125/125C 2-3 Shift 1980-Up | — |
| 744 | Part # 64744 | Aux. Valve Body, 125C 1982-89 | — |
| 744 | Part # 64744A | Aux. Valve Body, 125C 1990-Up | — |
| 747 | Part # 64747 | Plate, 125/125C Valve Body Separator 1980-Up | 1 |
| 925 not on diagram | Part # 64925C | Accumulator Assembly, 125C 1-2 Accumulator 1980-Up | — |
| 952 | Part # 64952 | Valve, 125/125C 2-3 Shift (Accumulator) 1980-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 64410 | Switch, 125/125C Neutral Safety (Cast # 255) 1980-Up | 1 |
| 410 | Part # 64410A | Switch, 125/125C Neutral Safety (Cast # 256) 1980-Up | 1 |
| 411 not on diagram | Part # 54411B | Switch, 125C 3rd Clutch Pressure (1 Prong) 1982-Up | 1 |
| 412 | Part # 64412 | Switch, 125C 3rd Clutch Pressure (2 Prong) 1982-Up | 1 |
| 412 | Part # 64412A | Switch, 125C 3rd Clutch Pressure (1 Prong) 1982-Up (Use 54411B) | 1 |
| 412 | Part # 64412B | Switch, 125C 3rd Clutch Pressure (1 Button Prong) 1989-Up | 1 |
| 412 | Part # 64412C | Switch, 125C 3rd Clutch Pressure (1 Prong Push-In) 1989-Up | 1 |
| 416 | Part # 64416 | Switch, 125C Governor Pressure 34 PSI 1982-Up | — |
| 416 | Part # 64416A | Switch, 125C Governor Pressure 40 PSI (Purple) 1982-Up | 1 |
| 416 | Part # 64416AA | Switch, 125C Governor Pressure 42-46 PSI (2 Blade) 1982-Up | 1 |
| 416 | Part # 64416B | Switch, 125C Governor Pressure 46-50 PSI (2 Blade) 1982-Up | 1 |
| 416 | Part # 64416BA | Switch, 125C Governor Pressure 46 PSI (Silver) 1982-Up | 1 |
| 416 | Part # 64416C | Switch, 125C Governor Pressure (3 Blade) 1988-89 | 1 |
| 416 | Part # 64416D | Switch, 125C Governor Pressure 50-54 PSI 1982-Up | 1 |
| 437 not on diagram | Part # 64437A | Switch, 125C Temperature Control 1989-Up | 1 |
| 442 not on diagram | Part # 44442A | Universal Adj Vacuum Switch, 700R4 (1”) | — |
| 442 not on diagram | Part # 44442B | Universal Adj Vacuum Switch, 700R4 (6”) | — |
| 444 | Part # 64444A | Connector, 125C Case (Round 5 Wire) 1983-Up | 1 |
| 444 | Part # 74444 | Connector, 125C Case (2 Prong) 1982-Up | 1 |
| 444 | Part # 74444A | Connector, 125C Case (3 Prong) 1982-Up | 1 |
| 444 | Part # 84444 | Connector, 125C Case (4 Prong Square) 1989-Up | 1 |
| 445 | Part # 44445 | Wire Harness, 125C External (2 Wire) 1982-Up | — |
| 445 | Part # 64445 | Wire Harness, 125C External (4 Wire) 1989-Up | 1 |
| 445 | Part # 74445 | Wire Harness, 125C External (3 Wire) 1982-Up | — |
| 445 | Part # 84445 | Wire Harness, 125C External (5 Wire) 1983-Up | 1 |
| 446 not on diagram | Part # 64446C | Wire Harness, 125C Aux. Valve Body 1982-Up | 1 |
| 847 not on diagram | Part # 64847P | Reluctor, 125C 8 Teeth | 1 |
| 847 not on diagram | Part # 64847PA | Reluctor, 125C 11 Teeth | 1 |
| 847 not on diagram | Part # 64847PB | Reluctor, 125C 14 Teeth | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 64010 | Filter, 125/125C 1980-Up | 1 |
| 014 not on diagram | Part # 64014 | Screen, 125/125C Governor (In Case) 1980-Up | 1 |
| 015 not on diagram | Part # 64015 | Filter, 125C Aux. Valve Body 1982-Up | 1 |
| 017 not on diagram | Part # 64017 | Filter, 125C TCC Solenoid 1982-Up | 1 |
| 765 | Part # 64765 | Pan, 125/125C Bottom 1980-83 | 1 |
| 765 | Part # 64765A | Pan, 125C Bottom 1984-Up | 1 |
| 766 | Part # 64766 | Pan, 125 Side 1980-81 | — |
| 766 | Part # 64766A | Pan, 125/125C Side 1982-83 | 1 |
| 766 | Part # 64766B | Pan, 125C Side 1984-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 not on diagram | Part # 84070 | Seal, 125/125C Front (Converter Hub) 1980-Up | 1 |
| 072 | Part # 64072 | Seal, 125/125C Manual Lever 1980-83 | 1 |
| 072 | Part # 84072A | Seal, 125C Manual Lever 1984-Up | 1 |
| 075 not on diagram | Part # 64075 | Seal, 125/125C Axle Stabilizer 1980-Up | — |
| 075 not on diagram | Part # T84075 | Seal, 125/125C Axle Stabilizer (Teckpak) 1980-Up | 1 |
| 076 | Part # 84076 | Seal, 125/125C Axle (Both Sides)(2.155”OD) 1980-Up | 2 |
| 078 not on diagram | Part # 44078X | Seal, 125/125C Speed-O Shaft 1980-Up | 1 |
| 079 not on diagram | Part # 64079 | Seal, 125/125C Pump Shaft 1980-5/84 | 1 |
| 176 | Part # 64176T | Ring, 125/125C Pump Slide (Teflon) 1980-Up | 1 |
| 177 | Part # 64177 | Ring, 125/125C Input Shaft (Metal) 1980-Up | 1 |
| 177 | Part # 64177T | Ring, 125/125C Input Shaft (Teflon) 1980-Up | — |
| 178 | Part # 64178AT | Ring, 125C Turbine Shaft (Front)(Solid)(Teflon) 1982-Up | 1 |
| 178 | Part # 64178BT | Ring, 125/125C Turbine Shaft (Rear)(Solid)(Teflon) 1980-Up | 1 |
| 178 | Part # 64178T | Ring, 125 Turbine Shaft (Front & Rear)(Scarf Cut)(Teflon) 1980-81 | 1 |
| 179 | Part # 64179 | Ring, 125/125C Driven Sprocket Support (Metal) 1980-Up | — |
| 179 | Part # 64179T | Ring, 125/125C Driven Sprocket Support (Teflon) 1980-Up | 1 |
| 189 not on diagram | Part # 54189BT | Ring, 125/125C Governor Shaft (Teflon) 1980-Up | 1 |
| 192 | Part # 64192 | Ring, 125/125C 1-2 Accumulator Piston (Metal) 1980-87 | 1 |
| 192 | Part # 64192T | Ring, 125/125C 1-2 Accumulator Piston (Teflon) 1980-87 | — |
| 193 | Part # 64193T | Ring, 125/125C Band Apply Pin (Teflon) 1980-Up | 1 |
| 194 not on diagram | Part # 54194ADT | Ring, 125/125C Intermediate Servo Piston (Outer)(Teflon) 1980-85 | 1 |
| 194 not on diagram | Part # 64194AT | Ring, 125/125C Intermediate Servo 1.676”OD (Inner)(Teflon) 1980-Up | 1 |
| 194 not on diagram | Part # 64194BT | Ring, 125/125C Intermediate Servo 1.500”OD (Inner)(Teflon) 1980-Up | 1 |
| 194 not on diagram | Part # 64194T | Ring, 125 Intermediate Servo 1.260”OD (Inner)(Teflon) 1980-81 | 1 |
| 300 | Part # 64300 | Gasket, 125/125C Bottom Pan 1980-Up | 1 |
| 301 | Part # 64301 | Gasket, 125/125C Side Pan (Valve Body Cover) 1980-Up | 1 |
| 307 | Part # 64307 | Gasket, 125/125C Intermediate Servo Cover 1980-Up | 1 |
| 308 | Part # 64308 | Gasket, 125/125C Case Cover to Case (Small Center Gasket) 1980-Up | 1 |
| 313 | Part # 64313 | O-Ring, 125/125C Pump Slide 1980-Up | 1 |
| 314 not on diagram | Part # 54314B | Seal, 125/125C Pump Slide (Rubber) 1980-Up | 1 |
| 315 not on diagram | Part # 54315B | Seal, 125/125C Pump Slide (Teflon) 1980-Up | 2 |
| 320 | Part # 64320 | Gasket, 125/125C Valve Body (Upper & Lower) 1980-Up | 1 |
| 322 | Part # 64322 | Gasket, 125C Aux. Valve Body L1984-Up | 1 |
| 322 | Part # 64322A | Gasket, 125C Aux. Valve Body 1982-E84 | 1 |
| 322 | Part # 64322B | Gasket, 125C Aux. Valve Body (Orange Stripe) 1987-Up | 1 |
| 322 | Part # 64322C | Gasket, 125C Aux. Valve Body (Blue Stripe) 1988-Up | 1 |
| 324 | Part # 64324 | Gasket, 125/125C Case Cover to Case (Large Outer Gasket) 1980-Up | 1 |
| 334 | Part # 64334 | Lip Seal, 125/125C Forward Clutch (Inner) 1980-86 | 1 |
| 334 | Part # 64334A | Lip Seal, 125C Forward Clutch (Inner) 1987-Up | — |
| 335 | Part # 64335 | Lip Seal, 125/125C Forward Clutch (Outer) 1980-86 | 1 |
| 335 | Part # 64335A | Lip Seal, 125C Forward Clutch (Outer) 1987-Up | — |
| 336 | Part # 64336 | Lip Seal, 125/125C Direct Clutch (Inner) 1980-Up | 1 |
| 336 | Part # 64336C | Lip Seal, 125/125C Direct Clutch (Center) 1980-Up | 1 |
| 337 | Part # 64337B | Lip Seal, 125/125C Direct Clutch (Outer)(Long Lip) 1980-Up | 1 |
| 338 | Part # 64338 | Lip Seal, 125/125C Low/Reverse Clutch (Inner) 1980-86 | 1 |
| 338 | Part # 64338A | Lip Seal, 125C Low/Reverse Clutch (Inner) 1987-Up | — |
| 339 | Part # 64339 | Lip Seal, 125/125C Low/Reverse Clutch (Outer) 1980-Up | 1 |
| 345 | Part # 84345 | Lathe Cut Seal, 125/125C Governor Cover 1980-Up | — |
| 352 not on diagram | Part # 64352 | Lathe Cut Seal, 125C 1-2 Accumulator Piston (Rubber) 1988-Up | 1 |
| 361 not on diagram | Part # 64361A | Lip Seal, 125C Intermediate Servo (Outer) 1986-Up | 1 |
| 361 not on diagram | Part # 64361AB | Lip Seal, 125C Intermediate Servo .856”ID (Inner) 1985-96 | 1 |
| 361 not on diagram | Part # 64361AC | Lip Seal, 125C Intermediate Servo 1.089”ID (Inner) 1985-Up | 1 |
| 361 not on diagram | Part # 64361AD | Lip Seal, 125C Intermediate Servo 1.261”ID (Inner) 1985-Up | 1 |
| 361 not on diagram | Part # 64361K | Lip Seal Set, 125/125C Intermediate Servo (Contains All Sizes) 1980-Up | — |
| 369 not on diagram | Part # 64369 | O-Ring, 125/125C Speed-O Housing 1980-Up | — |
| 371 | Part # 44371A | Gasket, 010/087/089/090 Filler Tube | 1 |
| 371 | Part # 44371B | Boot, 125C Filler Tube 1980-Up | 2 |
| 373 not on diagram | Part # 54373A | O-Ring, 125/125C Detent 1980-Up | 1 |
| 373 not on diagram | Part # 54373B | Boot, 125C Detent 1980-Up | 2 |
| 375 not on diagram | Part # 64375 | O-Ring, 125/125C Right Axle Stabilizer (OE Type) 1980-Up | — |
| 379 | Part # 64379 | Seal, 125/125C Filter (Late) 1986-Up | 1 |
| 380 | Part # 64380 | O-Ring, 125/125C Turbine Shaft (Goes Behind Splines) 1982-Up | 1 |
| 382 | Part # 64382 | O-Ring, 125/125C Reverse Oil Pipe to Case 1980-Up | 1 |
| 386 not on diagram | Part # 54386A | Cup Plug Seal, 200/200C/200-4R Low/Reverse Clutch Housing 1976-90 | 2 |
| 538 | Part # 64538 | Ring, 125/125C Pump Rotor to Vanes 1980-Up | 1 |
| 538 | Part # A64538 | Ring, 125/125C Pump Rotor (Metal) 1980-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 031 not on diagram | Part # 64031 | Bushing, 125 Converter Hub 1980-81 | 1 |
| 031 not on diagram | Part # 64031B | Bushing, 125C Converter Hub 1982-Up | 1 |
| 032 | Part # 64032 | Replaced by 54036A | — |
| 036 not on diagram | Part # 54036A | Bushing, 125/125C Converter Reactor (Stator) 1980-Up | 1 |
| 044 | Part # 64044 | Bushing, 125/125C Center Support (Low/Reverse Clutch Housing) & Rear Planet 1980-Up | 1 |
| 045 | Part # 64045 | Bushing, 125/125C Driven Sprocket Support 1980-Up | 1 |
| 046 | Part # 64046 | Bushing, 125/125C Direct Drum (Rear) 1980-Up | 1 |
| 046 | Part # 64046B | Bushing, 125/125C Direct Drum (Front) 1980-Up | 1 |
| 047 | Part # 64047 | Bushing, 125/125C Input Shaft 1980-Up | 1 |
| 050 | Part # 64050 | Bushing, 125/125C Front Ring Gear (Input Gear) 1980-Up | 1 |
| 052 | Part # 64052 | Bushing, 125/125C Reaction Sungear Shaft 1980-Up | 1 |
| 060 | Part # 64060 | Bushing, 125/125C Case & Final Drive Gear 1980-Up (1.555”OD)(1.435”ID)(.425”Tall) | 1 |
| 090 not on diagram | Part # 64090 | Axle Stabilizer, 125/125C Right Axle (Bushing Type) 1980-Up | — |
| 204 not on diagram | Part # 64204D-1 | Washer, 125C Final Drive Planet .550”ID (Steel) 1982-Up | 1 |
| 204 not on diagram | Part # 64204D-2 | Washer, 125C Final Drive Planet .550”ID (Bronze) 1982-Up | — |
| 209 | Part # 64209 | Bearing, 125/125C Pump Shaft (W/Out Seal Type) 1980-E84 | 1 |
| 209 | Part # 64209A | Bearing W/Seal, 125/125C Pump Shaft L84-Up | 2 |
| 210 | Part # 64210 | Spacer, 125/125C Pump Shaft 1980-E84 | — |
| 211 not on diagram | Part # 44211C | Bearing, 125/125C Case Cover to Driven Sprocket (# 280) 1980-Up | 1 |
| 226 | Part # 64226 | Washer, 125/125C Direct Drum to Support 1980-Up | 1 |
| 232 | Part # 64232 | Washer, 125/125C Forward Drum to Hub 1.220”ID (Plastic) 1980-87 | 1 |
| 232 | Part # 64232A | Washer, 125C Forward Drum to Hub 1.270”ID (Brass) 1987-Up | 1 |
| 235 | Part # 64235 | Washer, 125/125C Front Planet to Hub 1980-Up | 1 |
| 238 | Part # 64238 | Washer, 125/125C Front Planet to Sungear 1980-Up | 1 |
| 243 | Part # 64243 | Spacer, 125/125C Low/Reverse Clutch Housing to Inner Race 1.00MM-1.10MM 1980-Up | 1 |
| 243 | Part # 64243A | Spacer, 125/125C Low/Reverse Clutch Housing to Inner Race 1.42MM-1.52MM 1980-Up | 1 |
| 243 | Part # 64243B | Spacer, 125/125C Low/Reverse Clutch Housing to Inner Race 1.84MM-1.94MM 1980-Up | 1 |
| 243 | Part # 64243C | Spacer, 125/125C Low/Reverse Clutch Housing to Inner Race 2.26MM-2.36MM 1980-Up | 1 |
| 243 | Part # 64243D | Spacer, 125/125C Low/Reverse Clutch Housing to Inner Race 2.68MM-2.78MM 1980-Up | 1 |
| 243 | Part # 64243E | Spacer, 125/125C Low/Reverse Clutch Housing to Inner Race 3.10MM-3.20MM 1980-Up | 1 |
| 244 | Part # 64244 | Washer, 125/125C Sprag to Rear Planet | 1 |
| 244 | Part # 64244A | Bearing, 125/125C Sprag to Rear Planet (Late) | — |
| 247 | Part # 54247A | Bearing, 125/125C Rear Sungear & Final Drive Sungear (Rear) 1980-Up | 1 |
| 251 | Part # 54251A | Washer, 125/125C Rear Planet to Rear Ring Gear 1980-Up | 1 |
| 254 | Part # 64254 | Bearing, 125/125C Final Drive Sungear (Front) 1980-Up | 1 |
| 265 not on diagram | Part # 64265 | Washer, 125/125C Governor to Cover 1980-Up | 1 |
| 265 not on diagram | Part # 64265A | Bearing, 125C Governor to Cover 1982-Up | 2 |
| 275 not on diagram | Part # T64275 | Axle Stabilizer, 125/125C Bearing Type (OEM)(Teckpak) 1980-Up | — |
| 278 | Part # 64278 | Washer, 125/125C Drive Sprocket to Cover 1980-85 | — |
| 278 | Part # 64278A | Washer, 125C Drive Sprocket to Cover 1986-Up | 1 |
| 279 | Part # 64279A | Washer, 125C Drive Sprocket to Support 1986-Up | 1 |
| 280 | Part # 64280 | Bearing, 125/125C Case Cover to Driven Sprocket (Use 44211C) | — |
| 281 | Part # 64281 | Washer, 125 Driven Sprocket (Rear) (.156” Thick) 1980-81 | 1 |
| 281 | Part # 64281A | Washer, 125C Driven Sprocket (Rear) (.153” Thick) 1982-Up | 1 |
| 292 | Part # 64292 | Bearing, 125/125C Differential to Case (1.443”ID, 2.250”OD) 1980-Up | 1 |
| 293 | Part # 64293 | Spacer, 125/125C Differential to Case 1.45MM 1980-Up | 1 |
| 293 | Part # 64293A | Spacer, 125/125C Differential to Case 1.55MM 1980-Up | 1 |
| 293 | Part # 64293B | Spacer, 125/125C Differential to Case 1.65MM 1980-Up | 1 |
| 293 | Part # 64293C | Spacer, 125/125C Differential to Case 1.75MM 1980-Up | 1 |
| 293 | Part # 64293D | Spacer, 125/125C Differential to Case 1.85MM 1980-Up | 1 |
| 293 | Part # 64293E | Spacer, 125/125C Differential to Case 1.95MM 1980-Up | 1 |
| 293 | Part # 64293F | Spacer, 125/125C Differential to Case 2.05MM 1980-Up | 1 |
| 293 | Part # 64293G | Spacer, 125/125C Differential to Case 2.15MM 1980-Up | 1 |
| 293 | Part # 64293H | Spacer, 125/125C Differential to Case 2.25MM 1980-Up | 1 |
| 293 | Part # 64293J | Spacer, 125/125C Differential to Case 2.35MM 1980-Up | 1 |
| 295 | Part # 64295 | Bearing, 125/125C Converter Reactor (Rear) 1980-Up | 1 |
| 298 | Part # 64298 | Caged Needle Bearing, 125/125C Driven Sprocket Support 1980-Up | 1 |
| 382 | Part # 64382W | Washer, 125/125C Reverse Oil Pipe O-Ring to Case 1980-Up | 1 |
| 662 | Part # 64662 | Inner Race, 125/125C Low Roller Clutch 1980-Up | 1 |
| 958 | Part # 64958 | Spacer, 125/125C Final Drive (Tin) 1980-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 64022 | Band, 125/125C Flex (Narrow) 1980-81 | 1 |
| 022 | Part # 64022A | Band, 125/125C Flex (Wide) 1982-Up | 1 |
| 022 | Part # 64022AK | Band, 125/125C Flex (Kevlar) 1982-Up | — |
| 022 | Part # 64022B | Band, 125C Flex (Wide)(High Energy) 1994-Up (Retro Fits To 1982) | — |
| 555 | Part # 64555AK | Drum & Band Kit, 125/125C Direct Clutch (W/Piston & Lip Seals) 1980-84 | 1 |
| 905 not on diagram | Part # 64905 | Servo Assembly, 125/125C Intermediate 1.260”ID 1980-Up | — |
| 905 not on diagram | Part # 64905A | Servo Assembly, 125/125C Intermediate 1.495”ID 1980-Up | 1 |
| 905 not on diagram | Part # 64905B | Servo Assembly, 125/125C Intermediate 1.672”ID 1980-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 64500 | Pump, 125 W/Valve Body (W/Out Tube) 1980-81 | — |
| 500 not on diagram | Part # 64500A | Pump, 125 W/Valve Body (With Tube) 1980-81 | — |
| 500 not on diagram | Part # 64500B | Pump, 125C W/Valve Body 1982-84 | — |
| 500 not on diagram | Part # 64500C | Pump, 125C W/Valve Body (1 Solenoid & 1 Switch) 1985-Up (Square 2 Wire Connector at End of Solenoid Wire Harness) | — |
| 500 not on diagram | Part # 64500D | Pump, 125C W/Valve Body (1 Solenoid & 2 Switches) 1987-Up (Round 4 Wire Connector at End of Solenoid Wire Harness)… | — |
| 500 not on diagram | Part # 64500DA | Pump, 125C W/Valve Body (1 Solenoid & 2 Switches) 1987-Up (W/Screw-in 3rd Pressure Switch)… | 1 |
| 500 not on diagram | Part # 64500DB | Pump, 125C W/Valve Body (1 Solenoid & 2 Switches) 1987-Up (Square 3 Wire Connector at End of Solenoid Wire Harness)… | — |
| 500 not on diagram | Part # 64500DC | Pump, 125C W/Valve Body (1 Solenoid)(With 1 Screw-In & 1 Push-In Switch) 1987-Up… | — |
| 532 | Part # 64532 | Rotor, 125 (20 Spline)(.708”) 1980-81 | 1 |
| 532 | Part # 64532A | Rotor, 125C (15 Spline)(.708”) 1982-Up | 1 |
| 533 | Part # 64533 | Vane, 125/125C 1980-Up | 1 |
| 534 | Part # 64534 | Pump Slide, 125/125C 1980-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 106 | Part # 64106 | Friction, 125/125C Forward & Direct Clutch .080” 1980-E84 | 1 |
| 106 | Part # 64106A | Friction, 125/125C Forward & Direct Clutch .069” L1984-Up | 1 |
| 114 | Part # 64114 | Friction, 125/125C Low/Reverse Clutch .080” 1980-E84 | 1 |
| 114 | Part # 64114A | Friction, 125C Low/Reverse Clutch .090” L1984-Up | 1 |
| 119 not on diagram | Part # 64119 | Friction Module, 125/125C 1980-E84 | 1 |
| 119 not on diagram | Part # 64119B | Friction Module, 125C L1984-Up | — |
| 126 | Part # 64126 | Steel, 125/125C Direct Clutch .090” 1980-Up | 1 |
| 126 | Part # 64126X | Steel, 125/125C Direct Clutch .100” (Oversize) 1980-Up | — |
| 128 | Part # 64128 | Steel, 125/125C Forward Clutch .076” (Flat) 1980-Up | 1 |
| 129 | Part # 64129 | Steel, 125/125C Forward Clutch .050” (Waved) 1980-Up | 2 |
| 134 | Part # 64134 | Steel, 125/125C Low/Reverse Clutch .080” 1980-83 | 1 |
| 134 | Part # 64134A | Steel, 125C Low/Reverse Clutch .088” 1984-Up | 1 |
| 135 | Part # 64135 | Steel, 125/125C Low/Reverse Clutch .070” (Waved) 1980-83 | 1 |
| 135 | Part # 64135A | Steel, 125C Low/Reverse Clutch .078” (Waved) 1984-Up | 1 |
| 139 not on diagram | Part # 64139 | Steel Module, 125/125C 1980-E84 | — |
| 139 not on diagram | Part # 64139B | Steel Module, 125C L1984-Up | — |
| 142 | Part # 64142 | Pressure Plate, 125/125C Forward Clutch .193” (Flat) 1980-84 | 1 |
| 142 | Part # 64142A | Pressure Plate, 125C Forward & Direct Clutch .193” (Stepped) 1984-Up | 1 |
| 142 | Part # 64142B | Pressure Plate, 125C Forward & Direct Clutch .170” (Stepped) 1984-Up | — |
| 142 | Part # 64142C | Pressure Plate, 125C Forward & Direct Clutch .150” (Stepped) 1984-Up | 1 |
| 142 | Part # 64142D | Pressure Plate, 125C Forward & Direct Clutch .130” (Stepped) 1984-Up | 1 |
| 142 | Part # 64142EB | Pressure Plate, 125C Forward & Direct Clutch .170” (Flat) 1984-Up | — |
| 142 | Part # 64142EC | Pressure Plate, 125C Forward & Direct Clutch .183” (Flat) 1984-Up | — |
| 142 | Part # 64142EE | Pressure Plate, 125C Forward & Direct Clutch .208” (Flat) 1984-Up | — |
| 142 | Part # 64142EG | Pressure Plate, 125C Forward & Direct Clutch .235” (Flat) 1984-Up | — |
| 154 | Part # 64154 | Pressure Plate, 125/125C Low/Reverse Clutch 1980-Up | 1 |
| 907 | Part # 64907 | Piston, 125/125C Intermediate Servo 1980-Up | 1 |
| 927 | Part # 64927 | Piston, 125/125C 1-2 Accumulator 1980-Up | 1 |
| 964 | Part # 64964 | Piston, 125/125C Forward Clutch 1980-Up | 1 |
| 965 | Part # 64965 | Piston, 125/125C Direct Clutch 1980-Up | 1 |
| 967 | Part # 64967 | Piston W/Insert, 125/125C Low/Reverse Clutch (Steel) 1980-92 | — |
| 967 | Part # 64967A | Piston W/Insert, 125C Low/Reverse Clutch (Aluminum) 1993-Up | — |
| 974 | Part # 64974 | Spring, 125/125C Forward Clutch Return 1980-Up | — |
| 975 | Part # 64975 | Spring W/Retainer, 125/125C Direct Clutch 1980-Up | 1 |
| 977 | Part # 54977A | Return Spring, 200/200C/200-4R Low/Reverse Clutch 1976-Up | 1 |
| 977 | Part # 64977 | Spring, 125/125C Low/Reverse Clutch Return (Diaphragm)(Update) 1993-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 554 | Part # 64554 | Drum, 125 Forward Clutch (Uses Washer # 232 W/1.220”ID) 1980-81 | 1 |
| 554 | Part # 64554A | Drum, 125/125C Forward Clutch (Uses Washer # 232 W/1.220”ID) 1981-84 | 1 |
| 554 | Part # 64554B | Drum, 125C Forward Clutch (Uses Washer # 232 W/1.220”ID) 1985-86 | — |
| 554 | Part # 64554C | Drum, 125C Forward Clutch (Uses Washer # 232 W/1.270”ID) 1987-Up | 1 |
| 555 | Part # 64555 | Drum, 125 Direct Clutch (Narrow)1980-81 | — |
| 555 | Part # 64555A | Drum, 125/125C Direct Clutch (Wide)(Can Use 64555B) 1980-84 | 1 |
| 555 | Part # 64555B | Drum, 125C Direct Clutch (Wide)(4 & 5 Clutch)(Can Use 64555A) 1985-Up | 1 |
| 582 | Part # 64582 | Planet, 125/125C Front (Input) 1980-Up | 1 |
| 584 | Part # 64584 | Planet, 125/125C Rear (Reaction) 1980-Up | 1 |
| 592 | Part # 64592 | Ring Gear, 125/125C Front Planet 1980-Up | 1 |
| 594 | Part # 64594 | Ring Gear, 125/125C Rear Planet 1980-Up | 1 |
| 598 | Part # 64598 | Ring Gear, 125/125C Differential 1980-Up | 1 |
| 612 | Part # 64612 | Sun Gear, 125/125C Front Planet 1980-Up | 1 |
| 614 | Part # 64614 | Sun Gear, 125/125C Rear Planet 1980-Up | 1 |
| 618 | Part # 84618 | Sun Gear, 125/125C Differential (38 Teeth) 1980-Up | — |
| 618 | Part # 84618A | Sun Gear, 125/125C Differential (34 Teeth) 1980-Up | 1 |
| 618 | Part # 84618B | Sun Gear, 125/125C Differential (30 Teeth) 1980-Up | 1 |
| 622 | Part # 64622 | Shell, 125 Input 1980-E81 | — |
| 622 | Part # 64622A | Shell, 125/125C Input (W/Scoops & Roll Pins) L1981-Up | 1 |
| 622 | Part # 64622B | Shell, 125/125C Input (W/Scoops, No Roll Pins) L1981-86 | — |
| 632 | Part # 64632 | Center Support, 125 Low/Reverse Clutch Housing 1980-81 | — |
| 632 | Part # 64632A | Center Support, 125C Low/Reverse Clutch Housing 1982-84 | 1 |
| 632 | Part # 64632B | Center Support, 125C Low/Reverse Clutch Housing 1985-Up | 1 |
| 652 | Part # 64652 | Sprag, 125/125C Low Roller Clutch 1980-Up | 1 |
| 671 | Part # 64671A | Shaft, 125 Pump (20 Spline) 1980-81 | 1 |
| 671 | Part # 64671AA | Shaft, 125 Pump (Conversion)(15 Spline) 1980-81 | — |
| 671 | Part # 64671B | Shaft, 125C Pump (15 Spline W/Thick Steel Race) 1982-E84 | 1 |
| 671 | Part # 64671C | Shaft, 125C Pump (15 Spline W/Thin Steel Race) L1984-Up | 1 |
| 673 | Part # 63673A | Shaft, 125C Turbine 1982-Up | 1 |
| 673 | Part # 64673 | Shaft, 125 Turbine 1980-81 | 1 |
| 674 | Part # 64674 | Shaft, 125/125C Intermediate Sungear (Final Drive) 1980-Up | 1 |
| 678 | Part # 64678 | Shaft, 125/125C Output 1980-Up | 1 |
| 683 | Part # 64683A | Gear, 125/125C Governor Drive 1980-Up | 1 |
| 686 | Part # 64686 | Cover, 125/125C Governor (Washer Type) 1980-82 | 1 |
| 686 | Part # 64686A | Cover, 125C Governor (Bearing Type) 1982-Up | 1 |
| 686 | Part # 64686B | Cover, 125C Governor (Bearing Type W/Needles) 1982-Up | 1 |
| 686 | Part # 64686E | Cover, 125C Governor (Electronic Type) 1982-Up | — |
| 700 | Part # 64700 | Chain, 125/125C Drive (Narrow) 1980-83 | 1 |
| 700 | Part # 84700 | Chain, 125C Drive (Wide)(With D Type Pins) 1984-Up | 1 |
| 700 | Part # 84700A | Chain, 125C Drive (Wide)(Round Pins) 1984-Up | 1 |
| 705 | Part # 64705 | Sprocket, 125/125C Drive (33 Narrow Teeth) 1980-83 | 1 |
| 705 | Part # 64705A | Sprocket, 125/125C Drive (33 Wide Teeth) 1984-Up | 1 |
| 705 | Part # 64705D | Sprocket, 125/125C Drive (35 Narrow Teeth) 1980-83 | 1 |
| 705 | Part # 64705E | Sprocket, 125C Drive (35 Wide Teeth) 1984-Up | 1 |
| 705 | Part # 64705F | Sprocket, 125/125C Drive (37 Narrow Teeth) 1980-83 | 1 |
| 705 | Part # 64705G | Sprocket, 125C Drive (37 Wide Teeth) 1984-Up | 1 |
| 706 | Part # 64706 | Sprocket, 125/125C Driven (35 Teeth) (Narrow .655” Thick) 1980-83 | 1 |
| 706 | Part # 64706A | Sprocket, 125C Driven (35 Teeth) (Wide .780” Thick) 1984-Up | 1 |
| 706 | Part # 64706B | Sprocket, 125/125C Driven (37 Teeth) (Narrow .655” Thick) 1980-83 | 1 |
| 706 | Part # 64706C | Sprocket, 125C Driven (37 Teeth) (Wide .780” Thick) 1984-Up | 1 |
| 706 | Part # 64706D | Sprocket, 125/125C Driven (32 Teeth) (Narrow .655” Thick) 1980-83 | 1 |
| 706 | Part # 64706E | Sprocket, 125C Driven (32 Teeth) (Wide .780” Thick) 1984-Up | 1 |
| 706 | Part # 64706F | Sprocket, 125/125C Driven (33 Teeth) (Narrow .655” Thick) 1980-83 | 1 |
| 706 | Part # 64706G | Sprocket, 125C Driven (33 Teeth) (Wide ..780” Thick) 1984-Up | 1 |
| 713 | Part # 64713 | Support, 125 Driven Sprocket 1980-81 | 1 |
| 713 | Part # 64713A | Support, 125C Driven Sprocket 1982-84 | 1 |
| 713 | Part # 64713B | Support, 125C Driven Sprocket 1985-Up | 1 |
| 715 | Part # 64715 | Differential, 125/125C (38T)(.705”OD Chrome Cross Pin)(2”OD Brg # 247) 2.84 Ratio | 1 |
| 715 | Part # 64715A | Differential, 125/125C (38T)(.705”OD Chrome Cross Pin)(2 1/8”OD Brg # 247) 2.84 Ratio | — |
| 715 | Part # 64715B | Differential, 125/125C (38T)(.705”OD Black Cross Pin) 2.84 Ratio | — |
| 715 | Part # 64715C | Differential, 125/125C (34T)(.705”OD Chrome Cross Pin) 3.06 Ratio | 1 |
| 715 | Part # 64715D | Differential, 125/125C (30T)(.705”OD Black Cross Pin) 3.33 Ratio | 1 |
| 745 | Part # 64745 | Cover, 125C Valve Body 1982-84 | — |
| 745 | Part # 64745A | Cover, 125C Valve Body 1985-Up | 1 |
| 745 | Part # 64745B | Cover, 125 Valve Body 1980-81 | 1 |
| 755 | Part # 64755 | Case Cover, 125 1980-E81 | 1 |
| 755 | Part # 64755A | Case Cover, 125C (W/Flat Raised Boss)(1 Bolt Cable)(The Flat Boss is 2” to The Right of The Axle Seal W/1 Threaded… | 1 |
| 755 | Part # 64755B | Case Cover, 125C (W/Flat Raised Boss)(2 Bolt Cable)(The Flat Boss is 2” to The Right of The Axle Seal W/1 Threaded… | — |
| 755 | Part # 64755C | Case Cover, 125C (W/Angled Raised Boss)(1 Bolt Cable)… | — |
| 755 | Part # 64755D | Case Cover, 125C (W/Angled Raised Boss)(2 Bolt Cable)… | — |
| 760 | Part # 64760 | Case, 125 Flat Top Bell 1980-81 | 1 |
| 760 | Part # 64760A | Case, 125C Flat Top Bell (Starter at 4:00)(No Neutral Safety Mounting Holes) 1982-Up | 1 |
| 760 | Part # 64760B | Case, 125C Flat Top Bell (Starter at 4:00)(W/Neutral Safety Mounting Holes) 1982-Up | — |
| 760 | Part # 64760C | Case, 125C Round Bell (Starter at 10:00)(No Neutral Safety Mounting Holes) 1984-Up | 1 |
| 760 | Part # 64760D | Case, 125C Round Bell (Starter at 10:00)(W/Neutral Safety Mounting Holes) 1984-Up | 1 |
| 760 | Part # 64760E | Case, 125C Round Bell (Starter at 1:00)(No Neutral Safety Mounting Holes) 1984-Up | — |
| 760 | Part # 64760F | Case, 125C Round Bell (Starter at 1:00)(W/Neutral Safety Mounting Holes) 1984-Up | — |
| 761 not on diagram | Part # 64761-4 | Nail, 125/125C Holds Manual Valve in Case 1980-Up | 1 |
| 774 not on diagram | Part # 64774 | Housing, 125/125C Driven Speed-O Gear (1” Aluminum Bullitt) 1980-Up | 1 |
| 847 not on diagram | Part # 64847 | Gear, 125/125C Speed-O Drive (10 Teeth)(Green) 1980-Up | — |
| 847 not on diagram | Part # 64847D | Gear, 125/125C Speed-O Drive (27 Teeth)(Blue) 1980-Up | — |
| 847 not on diagram | Part # 64847E | Gear, 125/125C Speed-O Drive (28 Teeth)(Yellow) 1980-Up | — |
| 848 not on diagram | Part # 64848 | Gear, 125/125C Speed-O Driven (28 Teeth)(Yellow) 1980-Up | — |
| 848 not on diagram | Part # 64848A | Gear, 125/125C Speed-O Driven (29 Teeth)(Green) 1980-Up | — |
| 848 not on diagram | Part # 64848B | Gear, 125/125C Speed-O Driven (30 Teeth)(Blue) 1980-Up | — |
| 848 not on diagram | Part # 64848C | Gear, 125/125C Speed-O Driven (31 Teeth)(White) 1980-Up | — |
| 848 not on diagram | Part # 64848D | Gear, 125/125C Speed-O Driven (27 Teeth) (Black) | — |
| 848 not on diagram | Part # 64848E | Gear, 125/125C Speed-O Driven (28 Teeth) (Yellow) | — |
| 909 | Part # 64909 | Cover, 125/125C Intermediate Servo 1.260”ID 1980-Up | 1 |
| 909 | Part # 64909A | Cover, 125/125C Intermediate Servo 1.495”ID 1980-Up | 1 |
| 909 | Part # 64909B | Cover, 125/125C Intermediate Servo 1.672”ID 1980-Up | 1 |
| 991 | Part # 64991 | Manual Shaft, 125 (11 3/4” Long) 1980-81 | 1 |
| 991 | Part # 64991A | Manual Shaft, 125C (12” Long) 1982-Up | — |
| 995 not on diagram | Part # 64995 | Park Pawl Assembly, 125/125C 1980-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 386 not on diagram | Part # 64386B | Seal/Cup Plug, 125/125C Low/Reverse Clutch Housing (Long)(Updated) 1980-Up | — |
| 441 not on diagram | Part # 64441-2 | Pin, 125/125C Thermostatic Element 1980-Up | 1 |
| 480 not on diagram | Part # 64480 | Capsule W/Ck Ball, 125/125C Forward Drum 1980-Up | 1 |
| 483 not on diagram | Part # 64483A | Cup Plug, 125/125C Valve Body (Orifice)(Between Solenoid & Aux. Valve Body) 1982-Up | 1 |
| 483 not on diagram | Part # 64483C | Cup Plug, 125/125C Park Pawl Shaft 1980-Up | 1 |
| 483 not on diagram | Part # 64483T | Cup Plug, 125/125C 3rd Oil 1980-Up | — |
| 484 not on diagram | Part # 64484A | Cup Plug, 125/125C Servo (Orifice)(in Case) 1980-Up | 1 |
| 487 not on diagram | Part # 44487 | E-Clip, GM | 1 |
| 497 | Part # T54497D | Detent Cable, 125 (2.8L) & 125/125C (3.1L) (Overall Length 58”) 1980-85 (Techpak) | 1 |
| 497 | Part # T54497U | Detent Cable, 125/125C (Universal) 1980-Up (Techpak) | 1 |
| 497 | Part # T74497C-1 | Repair End, 125/125C Detent Cable 1980-Up (Teckpak) | 1 |
| 535 not on diagram | Part # 64535 | Pivot Pin, 125/125C Pump Slide 1980-Up | 1 |
| 536 | Part # 64536 | Spring, 125/125C Pump Slide 1980-Up | — |
| 541 not on diagram | Part # 64541 | Sleeve, 125/125C Pump Cover (Tin) 1980-Up | — |
| 547 not on diagram | Part # 64547 | Apply Ring, 125/125C Forward Clutch 1980-Up | 1 |
| 549 not on diagram | Part # 64549 | Apply Ring, 125/125C Reverse Clutch 1980-Up | 1 |
| 698 | Part # 64698A | Oil Weir, 125 W/Bracket 1980-81 | — |
| 701 not on diagram | Part # 64701 | Chain Snubber, 125/125C 1980-Up | — |
| 741 not on diagram | Part # 64741C-3 | Spring, 125C Lock-Up 1982-Up | 1 |
| 741 not on diagram | Part # 64741E-6 | Plug, 125C Aux. Valve Body 1982-Up | — |
| 741 not on diagram | Part # 64741M-6 | Plug, 125/125C Manual Valve | 1 |
| 741 not on diagram | Part # 64741M-6A | Plug, 125/125C Manual Valve | 1 |
| 741 not on diagram | Part # A64741T-4 | Pin, 125/125C TV Boost (Hardened) 1980-Up | — |
| 755 | Part # 64755S | Sleeve, 125/125C Case Cover (Channel Plate) 1980-Up | — |
| 775 not on diagram | Part # 64775 | Bolt, 125/125C Converter (Metric) 1980-Up | — |
| 842 | Part # 64842 | Clip, 125/125C Holds Speed-O Housing to Cover 1980-Up | 1 |
| 876 | Part # 64876 | Snap Ring, 125/125C Holds Forward & Direct Clutch Pressure Plate in Drum 1980-Up | 1 |
| 877 | Part # 64877 | Snap Ring, 125/125C Holds Forward Clutch Spring Retainer in Drum 1980-Up | 1 |
| 877 | Part # 64877K | Snap Ring Kit, 125/125C (Contains; # 877, 880, 884, & 887) 1980-Up | — |
| 878 | Part # 64878 | Snap Ring, 125/125C Holds Direct Clutch Pressure Plate in Drum (Use 64876) 1980-Up | 1 |
| 879 | Part # 64879 | Snap Ring, 125/125C Holds Direct Clutch Retainer in Drum (Use 64876) 1980-Up | 1 |
| 880 | Part # 64880 | Snap Ring, 125/125C Holds Drive Sprocket to Turbine Shaft 1980-Up | 1 |
| 883 | Part # 64883 | Snap Ring, 125/125C Holds Low/Reverse Clutch Housing in Case 1980-Up | 1 |
| 884 | Part # 64884 | Snap Ring, 125/125C Holds Low/Reverse Clutch Retainer In 1980-92 | — |
| 884 | Part # 64884A | Snap Ring, 125/125C Holds Low/Reverse Clutch Housing Retainer in (Spiral) 1993-Up | 1 |
| 885 | Part # 64885 | Snap Ring, 125/125C Holds Low/Reverse Clutches in Case 1980-Up | 1 |
| 886 | Part # 64886A | Snap Ring, 125/125C Holds Input Shell to Sungear .091” 1980-Up | 1 |
| 886 | Part # 64886B | Snap Ring, 125/125C Holds Input Shell to Sungear .098” 1980-Up | 1 |
| 886 | Part # 64886C | Snap Ring, 125/125C Holds Input Shell to Sungear .106” 1980-Up | 1 |
| 886 | Part # 64886D | Snap Ring, 125/125C Holds Input Shell to Sungear .111” 1980-Up | 1 |
| 886 | Part # 64886E | Snap Ring, 125/125C Holds Input Shell to Sungear .118” 1980-Up | 1 |
| 886 | Part # 64886F | Snap Ring, 125/125C Holds Input Shell to Sungear .125” 1980-Up | 1 |
| 886 | Part # 64886G | Snap Ring, 125/125C Holds Input Shell to Sungear .132” 1980-Up | 1 |
| 886 | Part # 64886H | Snap Ring, 125/125C Holds Input Shell to Sungear .138” 1980-Up | 1 |
| 887 not on diagram | Part # 44887 | Snap Ring, 125/125C Holds Speed-O Seal in Speed-O Housing 1980-Up | — |
| 887 not on diagram | Part # 64887 | Snap Ring, 125/125C Holds Output Shaft to Differential 1980-Up | 1 |
| 888 | Part # 64888 | Snap Ring, 125/125C Holds Pinion Pins to Differential Housing (Spiral)(Use 76874A) | 1 |
| 890 | Part # 64890 | Snap Ring, 125/125C Holds Final Drive Ring Gear in Case (Use 64883) 1980-Up | — |
| 895 | Part # 84895 | Snap Ring, 125/125C Output Shaft To Differential (Flat) 1983-Up | 1 |
| 899 | Part # 64899A | Snap Ring, 125/125C Forward Drum to Driven Sprocket Support 1.83-1.93MM 1980-Up | 1 |
| 899 | Part # 64899B | Snap Ring, 125/125C Forward Drum to Driven Sprocket Support 2.03-2.13MM 1980-Up | 1 |
| 899 | Part # 64899C | Snap Ring, 125/125C Forward Drum to Driven Sprocket Support 2.23-2.33MM 1980-Up | 1 |
| 899 | Part # 64899D | Snap Ring, 125/125C Forward Drum to Driven Sprocket Support 2.43-2.53MM 1980-Up | 1 |
| 899 | Part # 64899E | Snap Ring, 125/125C Forward Drum to Driven Sprocket Support 2.63-2.73MM 1980-Up | 1 |
| 906 | Part # 64906 | Spring, 125/125C Intermediate Servo Cushion 1980-Up | 1 |
| 906 | Part # 64906A | Spring, 125/125C Intermediate Servo Cushion (Red) 1980-Up | 1 |
| 908 | Part # 64908 | Pin, 125/125C Intermediate Servo (No Groove) 1980-Up | 1 |
| 908 | Part # 64908A | Pin, 125/125C Intermediate Servo (1 Groove) 1980-Up | 1 |
| 908 | Part # 64908B | Pin, 125/125C Intermediate Servo (2 Groove) 1980-Up | 1 |
| 916 | Part # 64916-5 | Anchor Plug, 125/125C Band (Plactic) 1980-Up | 1 |
| 926 | Part # 64926 | Spring, 125/125C 1-2 Accumulator 1980-85 (Purple) 1980-Up | 1 |
| 926 | Part # 64926A | Spring, 125C 1-2 Accumulator 1985-Up (Purple) 1980-Up | — |
| 928 | Part # 64928 | Pin, 125/125C 1-2 Accumulator 1980-Up | 1 |
| 963 | Part # 64963 | Insert, 125/125C Under The Forward Piston 1980-Up | 1 |
| 987 | Part # 64987 | Retainer, 125/125C Low/Reverse Clutch 1980-92 | 1 |
| 993 not on diagram | Part # 64993 | Linkage Assembly, 125/125C Internal 1980-Up | 1 |
| 994 not on diagram | Part # 64994 | Park Rod Actuator, 125/125C 1980-Up | — |
| 996 | Part # 44996A | Fitting, 250/250C/350/350C Cooler Line (Machine Thread) 1978-86 | — |
| 997 | Part # 64997 | T.V. Bracket, 125/125C 1980-Up | 1 |
| 997 | Part # 64997-7 | Wire Link, 125/125C Linkage Assembly to T.V. Cable 1980-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.