TF8 / 37RH parts diagram
Same diagram:
37RH
Transmission page:
Positions:
223 total, 122 on the diagram
Parts:
735 total, 273 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 22000 | Paper & Rubber Kit, A727 1962-70 | — |
| 000 not on diagram | Part # 22000C | Paper & Rubber Kit, A727 1971-94 | — |
| 000 not on diagram | Part # 22000E | Paper & Rubber Kit, A518/A618 (W/Viton) 1990-03 | — |
| 002 not on diagram | Part # 22002 | Overhaul Kit, A727 1962-70 | — |
| 002 not on diagram | Part # 22002C | Overhaul Kit, A727 1971-94 (For 4x4 Sell 12074J Also) | — |
| 002 not on diagram | Part # 22002E | Overhaul Kit, A518/A618 (W/Viton) 1990-03 (For 48RE 2003-Up Use 22002GW) | — |
| 002 not on diagram | Part # 22002GW | Overhaul Kit, 48RE (With Molded Rubber Pan Gasket) 2003-07 | — |
| 004 not on diagram | Part # 22004 | Master L/Steels Kit, A727 1962-70 | — |
| 004 not on diagram | Part # 22004C | Master L/Steels Kit, A727 1971-94 (For 4x4 Sell 12074J Also) | — |
| 004 not on diagram | Part # 22004E | Master L/Steels Kit, A518/A618 (W/Viton) 1990-97 | — |
| 004 not on diagram | Part # 22004EA | Master L/Steels Kit, A518/A618 (W/Viton) 1998-03 (W/Hi-Energy Direct Friction)(Does Not Fit 2003-Up 48RE Use 22004G) | — |
| 004 not on diagram | Part # 22004GW | Master L/Steels Kit, 48RE (With Molded Rubber Pan Gasket) 2003-Up (With 2 Sided Overdrive Direct Frictions)… | — |
| 006 not on diagram | Part # 22006 | Master W/Steels Kit, A727 1962-70 | — |
| 006 not on diagram | Part # 22006C | Master W/Steels Kit, A727 1971-94 (For 4x4 Sell 12074J Also) | — |
| 006 not on diagram | Part # 22006E | Master W/Steels Kit, A518/A618 (W/Viton) 1990-97 | — |
| 006 not on diagram | Part # 22006EA | Master W/Steels Kit, A518/A618 (W/Viton) 1998-03 (W/Hi-Energy Direct Friction) | — |
| 006 not on diagram | Part # 22006GW | Master L/Steels Kit, 48RE (With Molded Rubber Pan Gasket) 2003-Up (With 2 Sided Overdrive Direct Frictions)… | — |
| 011 not on diagram | Part # 22011A | Filter Kit, A727 Small Dacron (2 Hole) 1962-Up | — |
| 011 not on diagram | Part # 22011B | Filter Kit, A727 Small Brass (2 Hole) | — |
| 011 not on diagram | Part # 22011C | Filter Kit, A727/A518/A618 Large Dacron 1962-Up | — |
| 011 not on diagram | Part # 22011D | Filter Kit, A727/A518/A618 Large Brass 1962-Up | — |
| 011 not on diagram | Part # 22011J | Filter Kit, A518/A618/48RE 1998-07 (Metal & Plastic) | — |
| 030 not on diagram | Part # 12030E | Bushing Kit, A500 (Overdrive Section Only) 1988-Up | — |
| 030 not on diagram | Part # 22030 | Bushing Kit, A727 1962-70 | — |
| 030 not on diagram | Part # 22030B | Bushing Kit, A727/A518 (W/Out Overdrive Section) 1971-E92 | — |
| 030 not on diagram | Part # 22030EB | Bushing Kit, A518/A618/48RE (W/Out Overdrive Section) 1990-E92 | — |
| 030 not on diagram | Part # 22030EC | Bushing Kit, A518/A618/48RE (W/Out Overdrive Section) 1992-Up | — |
| 106 | Part # 22106HPK | Friction Kit, A727/A518/A618 Direct Clutch (.096”) (Hi-Performance) 1962-Up (4 Per Kit) | — |
| 106 | Part # 22106PPK | Friction/Steel Kit, A727/A518/A618 Direct Clutch (Power Pack) Alto | — |
| 108 | Part # 22108HPK | Friction Kit, A727/A518/A618 Forward Clutch (.061”) 62 Teeth (Hi-Performace) 1962-Up (4 Per Kit) | — |
| 169 not on diagram | Part # T22169 | Reprogramming Kit, A727 (Heavy Duty & Hi-Performance) (Transgo) | — |
| 169 not on diagram | Part # T22169B | Reprogramming Kit, A500 (Heavy Duty & Hi-Performance) (Transgo) (Will Not Work On 2003-Up 48RE, Sell T22165G) | 1 |
| 171 not on diagram | Part # T22171 | Reprogramming Kit, A727 (Full Race) (Transgo) | — |
| 173 not on diagram | Part # T22173 | Reprogramming Kit, A727 (Manual Shift) (Transgo) | — |
| 173 not on diagram | Part # T22173B | Reprogramming Kit, A500 (Manual Shift) (Transgo) | 1 |
| 175 not on diagram | Part # 22175 | Ring Kit, A727 Complete 1962-70 | — |
| 175 not on diagram | Part # 22175A | Ring Kit, A727 Short 1962-70 | — |
| 175 not on diagram | Part # 22175B | Ring Kit, A727 Short 1971-94 | — |
| 175 not on diagram | Part # 22175C | Ring Kit, A727 Complete 1971-94 | — |
| 175 not on diagram | Part # 22175D | Ring Kit, A727 1962-94 | — |
| 175 not on diagram | Part # 22175E | Ring Kit, A518/A618/48RE 1990-Up | — |
| 175 not on diagram | Part # 22175ET | Ring Kit, A518/A618/48RE (Teflon) 1990-Up | — |
| 200 not on diagram | Part # 22200 | Washer Kit, A727 1962-66 | — |
| 200 not on diagram | Part # 22200A | Washer Kit, A727 1967-89 | — |
| 200 not on diagram | Part # 22200B | Washer Kit, A727 1990-94 | — |
| 200 not on diagram | Part # 22200E | Washer Kit, A518/A618 1990-Up | — |
| 200 not on diagram | Part # 22200G | Washer Kit, 48RE 2003-Up (6 Gear Planets W/Selectives) | — |
| 201 not on diagram | Part # 12201A | Bearing Kit, A500 1989-Up (Torrington) | — |
| 213 not on diagram | Part # S12213K | Race Kit, A500 Overdrive Piston To Hub (Sonnax)… | 1 |
| 232 | Part # 12232DS | Shim Kit, A500 (Goes Under # 232 Washer)(3 Each .015” & .025” Shims)(Superior) | 1 |
| 232 | Part # 22232S | Shim Kit, A727 (Goes Under #232 Washer) (3 Each .015” & .025” Shims) (Superior) | — |
| 239 not on diagram | Part # S22239AK | Shim Kit, A727/A518/A618/48RE (Goes Under #238) (10 Per Kit) Sonnax | 1 |
| 390 not on diagram | Part # 22390 | External Seal Kit, A727 Includes Seals 1965-Up | — |
| 420 not on diagram | Part # 12420BK | Solenoid Kit, A500 Overdrive & Lock-Up (8 Pin Case Connector) (W/4 Pin Governor Sensor) 1993-99… | — |
| 432 not on diagram | Part # 12432AK | Repair Kit, A500 Governor Pressure Solenoid 1994-Up (Transgo) (Fixes 8 Solenoids) | — |
| 432 not on diagram | Part # 12432BK | Conversion Kit, A518/A618/48RE Governor Solenoid (Converts The Governor Solenoid To Use The GM # 34435B Solenoid)… | — |
| 445 not on diagram | Part # 12445BK | Repair Kit, A500 External Wire Harness (8 Pin Connector W/8 Crimp Style Connectors) 1993-Up (Rostra) | — |
| 555 | Part # 22555AGK | Drum Kit, A727/A518/A618/48RE Direct (Front Clutch) (5 Clutch) 1971-Up… | — |
| 556 | Part # 22556ACK | Drum Kit, A618 Reverse (W/Press On Race) (14 Roller) 1990-Up | — |
| 564 not on diagram | Part # 22564 | Piston Kit, A727/A518/A618/48RE Forward Clutch (.780” Thick Piston) 1962-Up | — |
| 564 not on diagram | Part # 22564A | Piston Kit, A727/A518/A618/48RE Forward Clutch (.840” Thick Piston) 1966-Up | — |
| 565 not on diagram | Part # 22565 | Piston Kit, A727 Direct Clutch 1962-71 | — |
| 565 not on diagram | Part # 22565A | Piston Kit, A727/A518/A618/48RE Direct Clutch (.285” Thick At The Edge Of Piston) 1972-Up | — |
| 565 not on diagram | Part # 22565AA | Piston Kit, A727/A518/A618/48RE Direct Clutch (.300” Thick At The Edge Of Piston) 1972-Up | — |
| 580 not on diagram | Part # 12580ABK | Planet Kit, A500 Overdrive (4 Gear) (W/15 Degree Teeth) 1995-Up (Sun Gear Has 1 I.D. Groove) Contains: From # 864 To #… | 1 |
| 580 not on diagram | Part # 12580AK | Planet Kit, A500 Overdrive (4 Gear) (W/22 Degree Teeth) 1989-94 (Sun Gear Has No I.D. Groove) Contains: From # 864 To #… | — |
| 580 not on diagram | Part # 12580BBK | Planet Kit, A500 Overdrive (5 Gear) (W/15 Degree Teeth) 1995-Up (Sun Gear W/1 I.D. Groove) Contains: From # 864 To #… | 1 |
| 580 not on diagram | Part # 12580CAK | Planet Kit, A500 Overdrive (6 Gear) (W/15 Degree Teeth) 1995-Up (Contains: Planet, Sun Gear, Ring Gear & # 12220) | — |
| 580 not on diagram | Part # 12580CK | Planet Kit, A500 Overdrive (6 Gear) (W/22 Degree Teeth) 1989-94 (Contains: Planet, Sun Gear, Ring Gear & #12220) | — |
| 583 not on diagram | Part # 22583E | Planet Kit, A518 Front & Rear 1996-Up (Contains: 582E, 592, 622A, 612, 584A, 594, Washers & Races) | — |
| 583 not on diagram | Part # 22583F | Planet Kit, 48RE Front & Rear 2003-Up (Contains: 582F, 592G, 622G, 612G, 584D, 594G, With Washers & Races)… | — |
| 665 | Part # 22665AK | Outer Race Kit, A518/A618/48RE Rear Sprag (14 Roller)(6 Bolt) Must Have T-9250 Tool To Install This | — |
| 665 | Part # 22665K | Outer Race Kit, A727 Rear Sprag | — |
| 678 | Part # S22678PAK | Pin/Plug Kit, A500 Pilot Pin (Goes Into The Intermediate Shaft) With Orifice Plug For Rear Of Shaft 1990-Up (Sonnax) | — |
| 681 not on diagram | Part # 12681B-2K | Repair Kit, A518 Governor (With Weights & Springs) | — |
| 681 not on diagram | Part # 22681B-2K | Repair Kit, A618/48RE Governor (Diesel) | — |
| 741 not on diagram | Part # 12741CK | Spring Kit, A727 Lock-Up Delay (Spring & Plate) | — |
| 741 not on diagram | Part # S12741D-6K | Plug Kit, A727/A518/A618/48RE Valve Body Governor Bore… | — |
| 741 not on diagram | Part # S12741NHPK | Throttle Vlave Kit, A727/A518/A618/48RE (High Performance) (Sonnax) | — |
| 741 not on diagram | Part # S12741NK | Throttle Valve Kit, A727/A518/A618/48RE (Valve, Plunger, Springs & Sleeve) Sonnax | — |
| 741 not on diagram | Part # S12741NOK | Throttle Valve Kit, A727/A518/A618/48RE (Oversize) (Valve, Plunger, Springs & Sleeve) Sonnax… | — |
| 741 not on diagram | Part # S22741NAK | Sleeve & Plug Kit, A727/A518/A618/48RE Line Pressure (.264”OD Plug) (Sonnax) | — |
| 741 not on diagram | Part # S22741NCK | Sure Cure Kit, A518/A618/48RE (Sonnax) | — |
| 761 not on diagram | Part # S22761S-2K | Sleeve Adapter Kit, A500 Neutral Safety Switch… | — |
| 777 | Part # 22777K | Bolt Set, A727/A518/A618/48RE Pump To Case | — |
| 778 | Part # 22778K | Bolt Set, A727/A518/A618/48RE Stator To Pump Body | — |
| 779 | Part # 22779K | Bolt Set, A727/A518/A618/48RE Pan To Case | — |
| 781 | Part # 12781AK | Bolt Set, A500 Extension Housing Top Case (7/16” Hex Head) | — |
| 781 | Part # 22781K | Bolt Set, A727 Extension Housing To Case (9/16” Hex Head) 1966-Up | — |
| 782 | Part # 22782AK | Bolt Set, A518/A618/48RE Valve Body To Case (10 Pieces) | — |
| 782 | Part # 22782K | Bolt Set, A727 Valve Body To Case (10 Pieces) | — |
| 787 | Part # 22787K | Bolt Set, A727/A518/A618/48RE Holds Governor To Support | — |
| 789 not on diagram | Part # 12789AK | Bolt Set, A727/A518 Output Shaft Bearing Cover To Extension Housing (Phillips Head) (2 Per Set) | — |
| 789 not on diagram | Part # 12789BK | Bolt Set, A727/A518/A618/48RE Output Shaft Bearing Cover To Extension Housing (Torx Head)(2 Per Set) | — |
| 790 | Part # 12790K | Bolt Set, A500 Overdrive Retainer (Or Rear Support) To Case (6 Pieces) | — |
| 790 | Part # 22790K | Bolt Set, A727 Output Support To Case (4 Bolt) 1962-Up | — |
| 791 not on diagram | Part # 22791K | Bolt Set, A727/A518/A618/48RE Filter To Valve Body 1962-Up | — |
| 792 not on diagram | Part # 22792K | Bolt Set, A727/A518/A618/48RE Snap Ring Cover To Extension Housing | — |
| 907 | Part # 22907K | Piston Set, A727/A518/A618/48RE Kickdown Servo (Super Servo)(Superior) | — |
| 927 | Part # 22927-2K | Piston/Sleeve Kit, A727/A518/A618/48RE Accumulator (Contains: 1 Piston, 2 Seals, 2 Sleeves) No Matching Required… | — |
| 991 | Part # S12991-2K | Detent Ball & Spring Kit, A727/A518/A618/48RE Valve Body Rooster Comb (Contains: Sleeve & Detent Ball)… | — |
| 996 | Part # 12996CK | Repair Kit, A727/A518 Cooler Line Fitting (With 1/4” Pipe Fittings) A Fix For Cracked Cases At The Cooler Fittings… | — |
| 996 | Part # 12996D-5K | Clip Kit, A904/A500 Push In Cooler LIne (6 Clips & O-Rings) (For 1/2” Cooler Lines) | — |
| 999 not on diagram | Part # 12999 | Tube Set, A518 Governor | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 165 not on diagram | Part # S22165 | Valve Body Kit, A727 (Superior) 1962-Up | 1 |
| 165 not on diagram | Part # T22165 | Valve Body Kit, A727 (No Yo-Yo) (Transgo) 1962-Up | 2 |
| 165 not on diagram | Part # T22165B | Valve Body Kit, A518/A618 Diesel 1988-2002 (Transgo) (Will Not Work On 2003-Up 48RE, Sell T22165G) | 1 |
| 165 not on diagram | Part # T22165G | Valve Body Kit, 48RE V-10 & Diesel 2003-Up | — |
| 167 not on diagram | Part # S22167 | Valve Body Kit, A500 (Gas/Diesel) Superior 1989-98 (Can Use S22167A) | 1 |
| 167 not on diagram | Part # S22167A | Valve Body Kit, A500 (Gas/Diesel) (Superior) 1999-03 | 1 |
| 167 not on diagram | Part # T22167 | Valve Body Kit, A500 Jr. (Gas Only) (Transgo) 1989-Up (For 48RE 2003-Up Use T22165G) | 2 |
| 167 not on diagram | Part # T22167G | Valve Body Kit, 48RE 2005-Up (Fits All Diesel With Throttle Valve Actuator)(Superior) | — |
| 171 not on diagram | Part # A22171 | Valve Body Kit, A727 (Fairbanks) 1962-Up | 1 |
| 171 not on diagram | Part # A22171B | Valve Body Kit, A500 (Transaction Kit) (Fairbanks) 1989-98 | 1 |
| 420 not on diagram | Part # 12420 | Solenoid, A500 Overdrive & Lock-Up (3 Pin Case Connector)(With TFT) 1988-95 | 1 |
| 420 not on diagram | Part # 12420B | Solenoid, A500 Overdrive & Lock-Up (8 Pin Case Connector) (W/4 Pin Oval Governor Sensor Connector) 1996-99 | 1 |
| 420 not on diagram | Part # 12420C | Solenoid, A500 Overdrive & Lock-Up (8 Pin Case Connector) (With 4 Blade Rectangle Governor Sensor Connector) 2000-Up | 2 |
| 420 not on diagram | Part # 22420 | Solenoid, A518 Overdrive (Single) ( 2 Pin Case Connector) | 1 |
| 432 not on diagram | Part # 12432A | Solenoid, A500 Governor Pressure 1994-Up (Most) | 1 |
| 460 not on diagram | Part # 22460G | Transmission Throttle Valve Actuator, 48RE TTVA (5.9L Diesel) 2005-Up… | — |
| 680 | Part # 12680B | Governor, A500 (Large Valve Is Steel 1.070”OD)(W/Keyway Slot In Aluminum Body) 1989-95 | — |
| 680 | Part # 12680C | Governor, A500/518 (Large Valve Is Brass 1.070”OD)(W/Keyway Slot In Aluminum Body) 1989-95 | — |
| 680 | Part # 22680 | Governor, A727 (Large Valve Is 1.002”OD) | — |
| 680 | Part # 22680A | Governor, A727 (Large Valve Is 1.070”OD) | — |
| 681 not on diagram | Part # 12681A-1 | Valve, A500 Governor (Small, Steel) Superior | — |
| 681 not on diagram | Part # S12681A-1 | Valve, A500 Governor (Small, Aluminum) (Sonnax) | — |
| 740 | Part # 22740 | Valve Body, A727 Non Lock-Up 1972-94 | — |
| 740 | Part # 22740-5 | Valve Body, A727 Non Lock-Up 1967-71 | — |
| 740 | Part # 22740A | Valve Body, A727 Lock-Up 1978-Up | — |
| 740 | Part # 22740AA | Valve Body, A727 Non Lock-Up (Diesel) 1978-94 | — |
| 740 | Part # 22740AB | Valve Body, A727 Lock-Up (Diesel) 1978-94 | — |
| 740 | Part # 22740B | Valve Body, A518/A618 Non Lock-Up (W/1 Solenoid) | — |
| 740 | Part # 22740BC | Valve Body, A518/A618 Non Lock-Up (W/1 Solenoid & Boost Valve Tube) | — |
| 740 | Part # 22740C | Valve Body, A518/A618 Lock-Up (W/2 Solenoids & Boost Valve Tube) | — |
| 740 | Part # 22740CA | Valve Body, A518/A618 Lock-Up (W/2 Solenoids & No Boost Valve Tube) | — |
| 740 | Part # 22740EC | Valve Body, A518/A618 (3 Solenoids & 1 Round Sensor) 4 Prong Governor Solenoid 1996-99… | — |
| 740 | Part # 22740ED | Valve Body, A518/A618 (3 Solenoids & 1 Square Sensor) 4 Blade Governor Solenoid 2000-Up… | — |
| 740 | Part # 22740G | Valve Body, A618 (47RE) (With 3 Solenoid & 1 Square Sensor) 4 Blade Governor Solenoid (Gas/Diesel) 2001-Up… | — |
| 740 | Part # 22740GA | Valve Body, 48RE (With 3 Solenoid & 1 Square Sensor)(4 Blade Governor Solenoid) (Diesel) 2003-Up… | — |
| 740 | Part # S12740POS-1 | Valve, A727/A518 Lube Pressure Regulated Valve (Sonnax)(Oversize)(Must Use Tool # T-F-22771A-TL7 & T-VB-Fix)… | — |
| 741 not on diagram | Part # 12741A-1 | Switch Valve, A518/A618/48RE Prevents Lock-Up Shudder | — |
| 741 not on diagram | Part # 12741A-5 | Check Ball, A727/A518/A618/48RE (11/32”) (Torlon) | — |
| 741 not on diagram | Part # S12741AOS-1 | Switch Valve, A500 (Oversize) (Sonnax) Must Use Reamer T-22771A-TL13 | — |
| 741 not on diagram | Part # S12741M-1 | Manual Valve, A727/A518/618/48RE (Allows Converter Charge In Park)(Sonnax) | — |
| 741 not on diagram | Part # S12741P-1 | Valve, A727/A518/A618/48RE Lube Pressure Regulated Valve (Reduces Converter Drain Back)(Sonnax) | — |
| 747 not on diagram | Part # 22747EA | Plate, A518/A618/48RE Valve Body (W/Out Boost Tube) 1988-97 | — |
| 747 not on diagram | Part # 22747EB | Plate, A518/A618/48RE Valve Body (For Lock-Up Boost Tube Type) 1993-03 | — |
| 747 not on diagram | Part # 22747G | Plate, A618(48RE) Valve Body (Diesel & V-10) 2003-06 (Transgo) | — |
| 925 not on diagram | Part # 22925 | Accumulator Assembly, A727/A518/A618/48RE (Plastic Piston) | — |
| 991 | Part # 12991A-3 | Rooster Comb, A727 (Has No Plastic Insulator For Neutral Safety Switch) 1965-E70 | — |
| 991 | Part # 12991B-3 | Rooster Comb, A727 (Has A Long Plastic Insulator For The Neutral Safety Switch) L1970-77 | — |
| 991 | Part # 12991C-3 | Rooster Comb, A727 (Has A Long Plastic Insulator For The Neutral Safety Switch) 1978-88 | — |
| 991 | Part # 12991D-3 | Rooster Comb, A727/A518/A618/48RE (Has A Long Plastic Insulator For The Screw In Neutral Safety Switch) 1989-01 | — |
| 991 | Part # 22991E-3 | Rooster Comb, A500 (Has A Short Plastic Insulator For The Push-In Neutral Safety Switch) | — |
| 993 not on diagram | Part # 22993 | Internal Linkage & Rooster Comb, A727 66-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 12410 | Neutral Switch, A404/413/470/670 (Long) | 1 |
| 410 | Part # 12410A | Neutral Switch, A404/413/470/670 (Short) | 2 |
| 410 | Part # 12410B | Neutral Switch, A727/A518/A618 (Screw-In)(3 Prong Short) (Clip On Connector) 1996-03 | — |
| 410 | Part # 12410C | Neutral Switch, A500/A518/A618/48RE (Push-In)(5 Prong) 6/2002-Up (Cast # 56045489AC) Square Body(2 Bolt) | 1 |
| 415 not on diagram | Part # 12415A | Sensor, A500 Governor Pressure (3 Pin) 1989-95 (Transducer) | 1 |
| 415 not on diagram | Part # 12415B | Sensor, A500 Governor Pressure (4 Pin Round Connector)(Transducer)(With TFT) 1996-99 | 1 |
| 415 not on diagram | Part # 12415C | Sensor, A500 Governor Pressure (4 Blade Rectangular Connector) (Black Plastic) (Transducer) (With TFT) 2000-Up | 1 |
| 436 not on diagram | Part # 92436 | Sensor, A500SE (42RE) Output Speed Sensor (.928”OD Threads) | 1 |
| 445 not on diagram | Part # 12445A | Wire Harness, A500 External Lock-Up Eliminator | — |
| 774 | Part # 12774-436 | Sensor, A727/A518/A618/48RE Speed (Screws Onto The 12774)(With 2 Pin Oval Connector) (Takes Place Of A Cable) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 12010A | Filter, A727 Small Dacron (2 Hole) 1962-Up | 1 |
| 010 | Part # 12010B | Filter, A727 Small Brass 1962-Up | 1 |
| 010 | Part # 12010C | Filter, A727/A518/A618 Large Dacron 1962-03 | 1 |
| 010 | Part # 12010D | Filter, A727/A518/A618 Large Brass 1962-03 | — |
| 010 | Part # 12010J | Filter, A500 1998-Up (Metal & Plastic) | 1 |
| 014 | Part # 12014 | Filter, A904 Governor 1966-Up | 1 |
| 018 not on diagram | Part # 12018 | Screen, A604 Valve Body Regulator Feed | — |
| 484 not on diagram | Part # 12484 | Orifice Screen, A500 For Overdrive Piston Retainer | 1 |
| 765 | Part # 22765 | Pan, A727 Shallow 1962-Up | — |
| 765 | Part # 22765A | Pan, A518/A618/48RE Deep (Flat Bottom) 1990-94 (Uses Dacron Filter) | 1 |
| 765 | Part # 22765B | Pan, A518/A618/48RE Deep (Ribbed W/Dip For Filter) 1995-Up (Uses Dacron Filter) | — |
| 765 | Part # 22765C | Pan, A518/A618/48RE Deep (Ribbed W/Flat Bottom)(3.135” Deep) 1998-Up (Uses A 1/2 Metal And 1/2 Plastic Filter) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 22070 | Seal, A727/A518/A618/48RE Front 1962-Up | 1 |
| 072 | Part # 22072 | Seal, A404/413/470/670 Manual Shaft (1/4” Thick) 1966-Up | 1 |
| 072 | Part # 22072A | Seal, A727/A518/A618/48RE Manual Shaft (3/8” Thick) 1966-Up | 1 |
| 074 | Part # 12074J | Seal, 42RLE Extension Housing 4x4 (2.568”OD) 2003-Up | 1 |
| 074 | Part # 22074A | Seal, A727/A518 Rear W/Bolt On Yoke (2 3/8”OD) 1965-92, Some 62-64 W/Brake Drum | 1 |
| 074 | Part # 22074AA | Seal, A727/A518 Rear W/Bolt On Yoke (2 3/4”OD) 1993-Up | 1 |
| 074 | Part # 22074G | Seal, 48RE (Rear) 2WD (2.985”OD) 2003-Up | 1 |
| 074 | Part # 36074 | Seal, 42RLE (Rear)(2.506”OD)(Without Boot) | 4 |
| 074 | Part # 36074B | Seal, 42RLE (Rear)(2.506”OD)(With Boot) | 1 |
| 078 | Part # 44078A | Seal, 250/250C/350/350C Speed-O Shaft (Rubber, W/Spring) 1969-86 | 2 |
| 177 | Part # 12177A | Ring, A404/413 Input Shaft (1.062”OD) (Metal) 1978-85 | 1 |
| 177 | Part # 12177AT | Ring, A404/413 Input Shaft (1.062”OD) (Teflon) 1978-86 | 1 |
| 177 | Part # 22177 | Ring, A727 Input Shaft (1.125”OD) (Metal) 1962-66 | 1 |
| 177 | Part # 22177A | Ring, A727/A518 Input Shaft (1.175”OD) (Metal) 1967-Up | 1 |
| 177 | Part # 22177E | Ring, A727/A518/A618/48RE Input Shaft (1.246”OD) (Metal) 1994-Up | — |
| 177 | Part # 22177ET | Ring, A727/A518/A618/48RE Input Shaft (1.246”OD) (Teflon) 1994-Up | 1 |
| 177 | Part # 22177FT | Ring, A727/A518/A618/48RE Input Shaft (1.246”OD) (Torlon, Butt Cut) 1994-Up | — |
| 178 not on diagram | Part # 22178GT | Ring, 48RE Stator Shaft (Front) Teflon (Lap Joint) 2003-Up | — |
| 179 | Part # 22179 | Ring, A727 Stator Shaft (2.625”OD) (Metal) 1962-70 | 1 |
| 179 | Part # 22179A | Ring, A727/A518/A618/48RE Stator Shaft (2.625”OD) (Aluminum) 1971-Up | 1 |
| 179 | Part # 22179B | Ring, A727/A518/A618/48RE Stator Shaft (2.625”OD) (Metal) 1978-Up (Steel Plated) | 1 |
| 179 | Part # 22179BT | Ring, A727/A518/A618/48RE Stator Shaft (2.625”OD)(Teflon)(High Performance) 1962-Up | — |
| 181 | Part # 22181 | Ring, A727/A518/A618/48RE Forward Clutch Drum (1.875”OD) (Metal) 1978-Up | 1 |
| 189 | Part # 12189 | Ring, A727 Governor (2.250”OD) (Butt Joint) (Metal) 1962-94 | 1 |
| 189 | Part # 12189A | Ring, A727 Governor (2.250”OD) (Lock Joint) (Metal) 1962-94 | 1 |
| 189 | Part # 12189B | Ring, A500 Governor (Metal) 1989-Up | — |
| 191 | Part # 12191CT | Ring, A518/A618 3-4 Accumulator Piston (Small, In Valve Body)(Teflon)(For D-Rings Use 12354AK) | — |
| 191 | Part # 22191 | Ring, A727 Accumulator Piston (Small) (1.062”OD) Use 12177A | — |
| 192 | Part # 12192 | Ring, A404/413/470/670 Accumulator (Large) 2.000”OD (Metal) 1978-Up | 1 |
| 192 | Part # 12192CT | RIng, A500 3-4 Accumulator In Valve Body (Large)(Teflon)(1.400”OD) | 2 |
| 192 | Part # 12192T | Ring, A404/413/470/670 Accumulator (Large) 2.000”OD (Teflon) 1978-Up | — |
| 194 | Part # 22194 | Ring, A727/A518/A618/48RE Kickdown Servo Piston (Small) (1.500”OD) (Metal) 1962-Up | 1 |
| 195 | Part # 22195 | Ring, A727/A518/A618/48RE Kickdown Servo Piston (Large) & Cover (2.125”OD) (Metal) 1962-Up | 1 |
| 300 | Part # 22300 | Gasket, A727/A518/A618/48RE Pan 1962-Up | 1 |
| 300 | Part # 22300W | Gasket, A618/48RE (Plastic With Rubber Bead) 2003-Up | — |
| 305 | Part # 12305A | Gasket, A727 Extension Housing 1966-94 | 1 |
| 305 | Part # 12305AE | Gasket, A500 Extension Housing 1989 (Also Fits Under Overdrive Piston Retainer) | 1 |
| 305 | Part # 12305AF | Gasket, A500 Extension Housing 1990-Up | 1 |
| 305 | Part # 12305J | Gasket, A727/A518/A618/48RE Output Shaft Bearing Cover 1962-Up | 2 |
| 305 | Part # 22305D | Gasket, A518/A618/48RE Overdrive Piston Retainer 1991-Up (Can Use This Gasket & 12305AF For 1990 Models) | — |
| 309 | Part # 44309 | Gasket, 180/180C Pump Bolt Washer 1969-Up | 2 |
| 310 not on diagram | Part # 22310 | Gasket, A727/A518/A618/48RE Pump 1962-2003 | 1 |
| 311 | Part # 22311 | O-Ring, A727/A518/A618/48RE Pump 1962-2003 | 1 |
| 325 not on diagram | Part # 12325A | Gasket, A500 Lock-Up & Overdrive Solenoid 1988-97 | — |
| 325 not on diagram | Part # 12325B | Gasket, A500 Lock-up & Overdrive Solenoid 1998-Up | — |
| 325 not on diagram | Part # 12325C | Gasket, A500 Governor Pressure Solenoid 1988-Up | — |
| 326 | Part # 12326 | Gasket, A727/A518/A618/48RE Filter 1962-Up | — |
| 330 not on diagram | Part # 12330 | Lip Seal, A500 Overdrive Clutch Piston (Inner) | — |
| 331 not on diagram | Part # 12331 | Lip Seal, A500 Overdrive Clutch Piston (Outer) | — |
| 334 | Part # 22334 | Lip Seal, A727/A518/A618/48RE Forward Clutch (Inner) 1962-Up | 1 |
| 335 | Part # 22335 | Lip Seal, A727/A518/A618/48RE Forward Clutch (Outer) 1962-Up | 1 |
| 336 | Part # 22336A | Lip Seal, A727 Direct Clutch (Inner) 1962-71 | 1 |
| 336 | Part # 22336AK | Lip Seal Kit, A727 Direct Clutch 1962-71 | — |
| 336 | Part # 22336B | Lip Seal, A727/A518/A618/48RE Direct Clutch (Inner) 1972-Up | 1 |
| 336 | Part # 22336BA | Lip Seal, A727/A518/A618 Direct Clutch (Inner) (Vamac) (Updated) Will Retro Fit 1972-Up | — |
| 336 | Part # 22336BK | Lip Seal Kit, A727/A518/A618/48RE Direct Clutch 1972-Up | — |
| 337 | Part # 22337A | Lip Seal, A727 Direct Clutch (Outer) 1962-71 | 1 |
| 337 | Part # 22337B | Lip Seal, A727/A518/A618/48RE Direct Clutch (Outer) 1972-Up | 1 |
| 347 not on diagram | Part # 12347 | O-Ring, A500 Electric Connector (15/16” Connector) | — |
| 347 not on diagram | Part # 12347A | O-Ring, A500 Electric Connector (1 1/16” Connector) | — |
| 349 | Part # 12349 | Seal, A404/413/470/670 Throttle Lever Shaft | 1 |
| 354 not on diagram | Part # 12354AK | D-Ring Set, A518/A618/48RE Accumulator (2 D-Rings) 1960-Up | — |
| 363 | Part # 22363 | Lip Seal, A727 Reverse Servo (2.812”OD)(Black) 1962-89 | 1 |
| 363 | Part # 22363AA | Lip Seal, A727/A518 Reverse Servo (2.812”OD) (Viton)(Blue) | — |
| 363 | Part # 22363B | Lip Seal, A618/48RE Reverse Servo (2.479”OD) (Viton)(Orange) | 1 |
| 368 | Part # 12368 | O-Ring, A727/A518/A618/48RE Speed-O Housing (Red) 1966-Up | 1 |
| 371 | Part # 12371 | Boot, A727/A518/A618/48RE Filler Tube 1997-Up | 1 |
| 371 | Part # 44371A | Gasket, 010/087/089/090 Filler Tube | 1 |
| 377 | Part # 12377A | Gasket/Washer, A727/A518/A618/48RE Neutral Safety Switch | 1 |
| 384 | Part # 22384 | O-Ring, 440-T4 Lock-Up Solenoid 1983-Up | 1 |
| 384 | Part # 22384A | Seal, A518/A618/48RE Reverse Band Lever Shaft 1990-Up | 1 |
| 487 not on diagram | Part # 22487A | Grommet, A727 Cross Shaft Link (AMC/JEEP) | — |
| 487 not on diagram | Part # 22487B | Grommet, A727 Cross Shaft Link (Chrysler) | 1 |
| 487 not on diagram | Part # 22487C | Grommet, A727 Manual Shaft | 1 |
| 634 | Part # 22634-6BK | Plug/O-Ring Kit, A500 (Fits 12634B) (Contains: 2 Plugs & O-Ring) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 22034 | Bushing, A727/A518/A618 Pump Body (Babbit)1962-Up | 1 |
| 034 | Part # 22034A | Bushing, A727/A518/A618 Pump Body (Bronze) 1962-92 | 1 |
| 034 | Part # 22034B | Bushing, A727/A518/A618/48RE Pump Body (Bronze)(W/Indented Oil Pockets) 1992-Up............................ Will Fit… | 1 |
| 037 | Part # 22037 | Bushing, A727 Stator (Rear) 1962-66 (1.125”ID) | 1 |
| 037 | Part # 22037B | Bushing, A727/A518 Stator (Rear) (1 1/8”ID) 1967-95 (1.180”ID) | 1 |
| 037 | Part # 22037C | Bushing, A727/A518/A618/48RE Stator (Rear) (1 1/4”ID) 1996-Up (1.250”ID) | — |
| 040 not on diagram | Part # 12040 | Bushing, A500 Overdrive Sun Gear (Rear) No Flange (1.42”OD) (Also Same As The Front Bushing W/No Flange 88-99) | — |
| 040 not on diagram | Part # 12040A | Bushing, A500 Overdrive Sun Gear (Front) W/Flange (1.42”OD) 1989-99 | — |
| 040 not on diagram | Part # 12040B | Bushing, A500 Overdrive Sun Gear (Front) No Flange (1.50”OD) 1999-Up | — |
| 046 | Part # 22046 | Bushing, A727 Direct Drum (Narrow) 1962-70 | 1 |
| 046 | Part # 22046C | Bushing, A727/A518/A618/48RE Direct Drum (W/Oil Groove) 1971-Up | 1 |
| 047 | Part # 22047 | Bushing, A727/A518 Input Shaft (.635”ID) 1962-89 | 1 |
| 050 not on diagram | Part # 22050E | Bushing, A518/A618/48RE Front Planet Ring Gear (Teflon) (Fits The 5 & 6 Gear Steel Front Planet) | — |
| 052 | Part # 22052 | Bushing, A727/A518/A618 Forward/Rear Sun Gear (Front & Rear Bushing)(.505” Wide) 62-Up | 1 |
| 052 | Part # 22052B | Bushing, A727/A518/A618/48RE Forward/Rear Planet Sun Gear (Rear Bushing)(.750” Wide) | — |
| 062 not on diagram | Part # 12062 | Bushing, A500 Output Shaft To Overdrive Sprag Race (2.144”ID) 1989-Up | 1 |
| 062 not on diagram | Part # 12062B | Bushing, A500 Output Shaft To Intermediate Shaft (.605”ID) 1989-Up | 1 |
| 066 | Part # 22066G | Bushing, 48RE Extension Housing (2.300”OD)(2.168”ID) 2003-Up | — |
| 066 | Part # 36066 | Bushing , A727/A518/A618/48RE Extension Housing (1.690”ID)(Bronze)(Does Not Fit 48RE 03-Up) 1965-Up | 2 |
| 066 | Part # 36066T | Bushing , A727/A518/A618 Extension Housing (1.690”ID)(Teflon Coated) 1965-Up | — |
| 211 | Part # 22211 | Washer, A727/A518/A618/48RE Stator To Direct Drum (.043”) | 1 |
| 211 | Part # 22211A | Washer, A727/A518/A618/48RE Stator To Direct Drum (.061”) | 1 |
| 211 | Part # 22211B | Washer, A727/A518/A618/48RE Stator To Direct Drum (.084”) | 1 |
| 211 | Part # 22211C | Washer, A727/A518/A618/48RE Stator To Direct Drum (.102”) | 1 |
| 213 not on diagram | Part # 12213 | Race, A500 Overdrive Piston To Hub (.108”) | 1 |
| 213 not on diagram | Part # 12213A | Race, A500 Overdrive Piston To Hub (.123”) | 1 |
| 213 not on diagram | Part # 12213B | Race, A500 Overdrive Piston To Hub (.138”) | 1 |
| 213 not on diagram | Part # 12213C | Race, A500 Overdrive Piston To Hub (.155”) | 1 |
| 213 not on diagram | Part # 12213D | Race, A500 Overdrive Piston To Hub (.168”) | 1 |
| 213 not on diagram | Part # 12213E | Race, A500 Overdrive Piston To Hub (.183”) | 1 |
| 213 not on diagram | Part # 12213G | Race, A500 Overdrive Piston To Hub (.198”) | 1 |
| 213 not on diagram | Part # 12213H | Race, A500 Overdrive Piston To Hub (.213”) | 1 |
| 213 not on diagram | Part # 12213HA | Race, A500 Overdrive Piston To Hub (.228”) | 1 |
| 213 not on diagram | Part # 12213J | Race, A500 Overdrive Piston To Hub (.243”) | 1 |
| 214 not on diagram | Part # 12214 | Bearing, A500 Overdrive Piston To Hub | 1 |
| 215 not on diagram | Part # 12215 | Spacer, A500 Intermediate Shaft To Overdrive Planet (.158”) | 1 |
| 215 not on diagram | Part # 12215A | Spacer, A500 Intermediate Shaft To Overdrive Planet (.175”) | 1 |
| 215 not on diagram | Part # 12215B | Spacer, A500 Intermediate Shaft To Overdrive Planet (.193”) | 1 |
| 215 not on diagram | Part # 12215C | Spacer, A500 Intermediate Shaft To Overdrive Planet (.211”) | 1 |
| 219 not on diagram | Part # 12219 | Race, A500 Overdrive Planet To Hub | 1 |
| 220 not on diagram | Part # 12220 | Bearing & Race, A500 Overdrive Planet To Hub (Updated) | 1 |
| 221 not on diagram | Part # 12221 | Bearing, A500 Overdrive Planet To Hub (3.210”OD) (Use 12222 or 12220) | 1 |
| 221 not on diagram | Part # 12221A | Bearing, A500 Overdrive Planet To Hub (3.853”OD) (Can Use 12220) | — |
| 222 not on diagram | Part # 12222 | Bearing, A500 Overdrive Inner Sprag Race To Output Shaft (3.210”OD) | 1 |
| 232 | Part # 12232DA | Washer, A727/A518/A618/48RE Output Shaft (3 Outer Tabs) (.068”) 1990-Up | 1 |
| 232 | Part # 12232DB | Washer, A727/A518/A618/48RE Output Shaft (3 Outer Tabs) (.083”) 1990-Up | 1 |
| 232 | Part # 22232 | Washer, A727 Output Shaft To Forward Drum (No Tabs) (.060) (Metal) 1962-78 | 1 |
| 232 | Part # 22232A | Washer, A727 Output Shaft To Forward Drum (3 Tab) (Metal) (.060) 1978-89 | 1 |
| 233 | Part # 12233D | Race, A727/A518/A618/48RE Output Shaft 1990-Up(Used With 12232DA & DB)..........................................… | 1 |
| 233 | Part # 22233 | Race, A727 Output Shaft To Washer (For 22232A) 1978-89 | 1 |
| 238 | Part # 22238 | Washer, A727 Forward Planet To Ring Gear, Shell To Front Ring & Shell To Rear Planet | 1 |
| 238 | Part # 22238A | Washer, A727/A518 Forward Planet To Ring Gear, Shell To… | 1 |
| 238 | Part # 22238B | Washer, A618 Forward Planet To Ring Gear And Shell To Rear Planet (4 Tab)(2.245”ID) 1994-03 | — |
| 238 | Part # 22238D | Washer, A727/A518/A618 Forward Planet To Ring Gear (5 Tab For A 5 Gear Planet) 1996-03 | 1 |
| 238 | Part # 22238E | Washer, A727/A518/A618 Forward Planet To Ring Gear, Ring Gear To Shell & Shell To ............................... Rear… | — |
| 238 | Part # 22238EA | Washer, A618 Forward Planet To Ring Gear (6 Tab)(2.525”ID)(3.700”OD) 2003-07 | 1 |
| 238 | Part # 22238EB | Washer, 48RE Shell To Rear Planet 2003-07 (Use 22252B) | 1 |
| 243 | Part # 22243 | Race, A727/A518/A618/48RE Driving Shell (Rear) (3.460”OD) 1962-02… | 1 |
| 243 | Part # 22243G | Race, A618 (48RE) Driving Shell (Rear) (3.730”OD) 2003-Up | 1 |
| 252 | Part # 22252 | Race, A727/A518/A618 Rear Planet To Rear Ring Gear (With Splines On The ID)(3.365”OD) 1962-02 | 1 |
| 252 | Part # 22252B | Washer, 48RE Rear Planet To Ring Gear (6 Tabs)(2.245”ID)(3.700”OD) (Also Fits Shell To Rear Planet #238) 2003-07 | 1 |
| 254 | Part # 22254 | Washer, A518 Under Snap Ring To Rear Band Drum (1 Tab) 1989-90 (1988 Did Not Use This) | 1 |
| 254 | Part # 22254A | Washer, A518/A618/48RE Under Snap Ring To Rear Band Drum (2 Tab) 1991-Up | 1 |
| 257 not on diagram | Part # S22257 | Bearing, A727/A518/A618/48RE Case Repair (Sonnax)(Maching Required In Sprag Pocket) | 1 |
| 271 not on diagram | Part # 12271 | Ball Bearing, A500 Output Shaft (Front) (2.750”ID) (W/Snap Ring Groove) | 1 |
| 272 | Part # 22272A | Ball Bearing, A727 Output Shaft (Rear) (1.375”ID) W/Snap Ring Groove | 1 |
| 272 | Part # 22272AA | Ball Bearing, A727 Output Shaft (Rear) (1.230”ID) W/Snap Ring Groove | 1 |
| 272 | Part # 22272B | Bearing, A727 Output Shaft (W/Bolt-On Yoke) | 1 |
| 272 | Part # 22272E | Ball Bearing, A500 Output Shaft (Rear) (2.835”OD)(1.375”ID) Has No Snap Ring Groove | — |
| 660 not on diagram | Part # 12660 | Inner Race, A500 Overdrive Sprag 1990-Up | 1 |
| 664 | Part # 22664 | Inner Race, A727/A518 Rear Sprag (12 Roller Type) | 1 |
| 664 | Part # 22664A | Inner Race, A727/A518/A618/48RE Rear Sprag (14 Roller Type) Sonnax | 1 |
| 665 | Part # 22665 | Outer Race, A727/A518 Rear Sprag (12 Rollers Type) 1962-64 | — |
| 665 | Part # 22665A | Outer Race, A727/A518/A618/48RE Rear Sprag (14 Roller Type) 1991-Up | 1 |
| 853 | Part # 22853 | Cushion Spacer, A727/A518/A618/48RE Forward Clutch Spring Spacer | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 22022A | Band, A727/A518/A618/48RE Kickdown Flex 1971-Up | 1 |
| 022 | Part # 22022AK | Band, A727/A518/A618/48RE Kickdown Flex (W/Kevlar) 1971-Up | — |
| 022 | Part # 22022AS | Band, A727/A518/A618/48RE Kickdown Flex (Slip On) | — |
| 022 | Part # 22022B | Band, A727 Kickdown Rigid 1962-1971 | 1 |
| 022 | Part # 22022BH | Band, A727 Kickdown Rigid (Wide, Hemi) 1964-1971 | — |
| 022 | Part # 22022BK | Band, A727 Kickdown Rigid (W/Kevlar) 1964-71 | — |
| 022 | Part # 22022BS | Band, A727 Kickdown Rigid (W/3 Grooves) | — |
| 024 | Part # 22024 | Band, A727/A518 Reverse (Fits 6”OD Drum) 1962-Up | 1 |
| 024 | Part # 22024A | Band, A727/A518 Reverse (W/Heavy Duty Ends) (Fits 6”OD Drum) 1962-Up | 1 |
| 024 | Part # 22024B | Band, A727/A518/A618/48RE Reverse (Fits 6 1/4”OD Drum) L1991-Up | 1 |
| 024 | Part # 22024C | Band, A618/48RE Reverse Double Wrap (Fits 6 1/4”OD Drum) 1996-Up | 1 |
| 905 not on diagram | Part # 22905 | Servo Assembly, A727/A518/A618/48RE Kickdown (Large Pin Type) 1972-Up | — |
| 905 not on diagram | Part # 22905A | Servo Assembly, A727 Kickdown (Small Pin Type) 1962-71 | — |
| 910 not on diagram | Part # 22910 | Servo Assembly, A727/A518 Reverse Servo (2.812”OD) 1966-Up | — |
| 910 not on diagram | Part # 22910A | Servo Assembly, A618/48RE Reverse Servo (Diesel) (2.479”OD) | — |
| 916 | Part # 22916 | Strut Assembly, A727/A518/A618/48RE Kickdown Band | — |
| 916 | Part # 22916-2 | Strut, A727/A518/A618/48RE Kickdown Band Apply (Heavy Duty) Superior | 1 |
| 916 | Part # 22916-3 | Strut, A727/A518/A618/48RE Kickdown Band Anchor (Pin Side) | 1 |
| 916 | Part # 22916-3HD | Strut, A727/A518/A618/48RE Kickdown Band Anchor (Pin Side)(The Power Wedge) (Adapt-A-Case) | — |
| 916 | Part # S22916-2 | Strut, A727/A518/A618/48RE Kickdown Band Apply (Hi-Performance)(Sonnax) | — |
| 917 | Part # 22917 | Strut Assembly, A727/A518 Reverse Band (W/Solid Type Band) (6” Drum) (7 Pieces) (Lever # 176 or 139) 1962-E91 | — |
| 917 | Part # 22917A | Strut Assembly, A727/A618/48RE Reverse Band (W/Solid Type Band) (6 1/4” Drum) (7 Pieces) (Lever # 6AB) L1991-Up | — |
| 917 | Part # 22917C | Strut Assembly, A618/48RE Reverse Band (Double Wrap Type Band) (6 1/4” Drum) (5 Pieces) (Lever # 412) 1996-Up | — |
| 917 | Part # S22917C-2 | Band Strut, A518/A618/48RE Reverse Band (.100” Longer)(Sonnax) | — |
| 917 | Part # S22917D-2 | Band Strut, A518/A618/48RE Reverse Band (.150” Longer)(Sonnax) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 22500 | Pump, A727 (1.175”ID Of Stator Bushing) 1967-70 (Fits Direct Drum With A Narrow Bushing) | — |
| 500 not on diagram | Part # 22500-1 | Pump, A727 (1.125”ID Of Stator Bushing) 1962-66 (Fits Direct Drum With A Narrow Bushing) | — |
| 500 not on diagram | Part # 22500A | Pump, A727 (1.175”ID Of Stator Bushing) (With 1 Check Ball) 1971-77 | — |
| 500 not on diagram | Part # 22500B | Pump, A727/A518 Non Lock-Up (1.175”ID Of Stator Bushing)(With 2 Check Balls) 1978-Up | — |
| 500 not on diagram | Part # 22500BA | Pump, A727/A518/A618/48RE Non Lock-Up (1 1/4”ID Of Stator Bushing)(W/2 Check Balls) 1994-Up | — |
| 500 not on diagram | Part # 22500C | Pump, A727/A518 Lock-Up (1.175”ID Of Stator Bushing)(With 3 Check Balls) 1978-Up | — |
| 500 not on diagram | Part # 22500CA | Pump, A727/A518/A618/48RE Lock-Up (1 1/4”ID Of Stator Bushing)(With 3 Check Balls) 1994-Up | 1 |
| 500 not on diagram | Part # 22500D | Pump, A618 (48RE) Lock-Up (1 1/4” ID Stator Bushing)(With 3 Check Balls)(With Ring Groove On Stator Shaft) 2003-Up… | — |
| 507 not on diagram | Part # 22507A | Pump Baffle Vent, A727/A518/A618/48RE (Plastic) 1971-Up | — |
| 510 not on diagram | Part # 22510 | Pump Body W/Gears, A727 1962-70 | — |
| 510 not on diagram | Part # 22510A | Pump Body W/Gears, A727/A518 (15 Teeth On Outer Gear) 1971-Up | — |
| 510 not on diagram | Part # 22510B | Pump Body W/Gears, A727/A518/A618/48RE (12 Teeth On Outer Gear) L1989-E96 (Can Use 22510C) | — |
| 510 not on diagram | Part # 22510C | Pump Body W/Gears, A727/A518/A618/48RE (11 Teeth On Outer Gear) L1996-Up… | 1 |
| 520 | Part # 22520 | Stator, A727 1967-70 | 1 |
| 520 | Part # 22520-1 | Stator, A727 (1.125”ID Of Bushing) 1962-66 (Fits Direct Drum With A Narrow Bushing) | — |
| 520 | Part # 22520A | Stator, A727 (W/1 Check Ball) 1971-77 | 1 |
| 520 | Part # 22520B | Stator, A727/A518 Non Lock-Up (1 1/8”ID Rear Bushing) 1978-Up (W/2 Check Balls) | 1 |
| 520 | Part # 22520BA | Stator, A727/A518/A618/48RE Non Lock-Up (1 1/4”ID Rear Bushing) (W/2 Check Balls) | — |
| 520 | Part # 22520C | Stator, A727/A518 Lock-Up (1.175”ID Rear Bushing)(W/3 Check Balls) 1978-Up | — |
| 520 | Part # 22520CA | Stator, A727/A518/A618/48RE Lock-Up (1 1/4”ID Rear Bushing) 1994-Up (W/3 Check Balls) | — |
| 520 | Part # 22520D | Stator, A618 (48RE) L/Up (1 1/4”ID Rear Bushing) 2003-Up (W/3 Check Balls) Has An Ring Groove On Stator Shaft | — |
| 530 | Part # 22530 | Pump Gears, A727/A518/A618/48RE (W/15 Teeth Outer Gear) (.747” Thick) | — |
| 530 | Part # 22530A | Pump Gears, A727/A518/A618/48RE (W/15 Teeth Outer Gear) (.748” Thick) | — |
| 530 | Part # 22530AA | Pump Gears, A727/A518/A618/48RE (W/15 Teeth Outer Gear) (.749” Thick) | — |
| 530 | Part # 22530BA | Pump Gears, A518/A618/48RE (W/12 Teeth Outer Gear) (.748” Thick) | — |
| 530 | Part # 22530C | Pump Gears, A518/A618/48RE (10 Teeth On Inner Gear)(11 Teeth On Outer)(.747” Thick) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 not on diagram | Part # 12100 | Friction, A500 Overdrive Clutch (.087”) (Flat) 1988-Up | 1 |
| 100 not on diagram | Part # 12100A | Friction, A500 Overdrive Clutch (.087”) (Waved) 1990-Up Hi-Energy (Retro Fits Early) | 1 |
| 102 not on diagram | Part # 12102 | Friction, A500 Overdrive Direct Clutch (.063”) 1988-Up | 1 |
| 102 not on diagram | Part # 22102E | Friction, A618 Overdrive Direct Clutch (.048”) 54 Teeth (Hi-Energy) (1 Sided Friction, Internal Teeth) 2003-Up… | — |
| 106 | Part # 22106 | Friction, A727/A518/A618 Direct Clutch (.096”) (Waffle) 1962-Up | 1 |
| 106 | Part # 22106A | Friction, A727/A518/A618 Direct Clutch (.096”) (Hi-Energy) 1992-Up | — |
| 106 | Part # 22106B | Friction, A518/A618 Direct Clutch (.084”) (Hi-Energy) 1997-Up | — |
| 106 | Part # 22106CS1 | Friction, A727/A518/A618 Direct Clutch (.090”)(Stage 1) 1962-Up | — |
| 106 | Part # 22106HD | Friction, A727/A518/A618 Direct Clutch (.096”) (Heavy Duty) 1962-Up | — |
| 106 | Part # 22106HP | Friction, A727/A518/A618 Direct Clutch (.096”) (Hi-Performance) 1962-Up (Use 22108HP) | — |
| 106 | Part # 22106S1 | Friction, A727/A518/A618 Forward & Direct Clutch (.059”)(Stage 1) 1962-Up | — |
| 108 | Part # 22108 | Friction, A727/A518/A618 Forward Clutch (.061”) 62 Teeth (Smooth) 1962-Up | 1 |
| 108 | Part # 22108A | Friction, A727/A518/A618 Forward Clutch (.065”) 62 Teeth (Hi-Energy) 1962-Up (Kevlar) | — |
| 108 | Part # 22108E | Friction, 48RE Forward Clutch (.061”) 93 Teeth (Hi-Energy) 2003-Up | — |
| 108 | Part # 22108HD | Friction, A727/A518/A618 Forward (.061”) (Heavy Duty) 1962-Up | — |
| 108 | Part # 22108HP | Friction, A727/A518/A618 Forward Clutch (.061”) 62 Teeth (Hi-Performance) 1962-Up | — |
| 119 not on diagram | Part # 22119 | Friction Module, A727 1962-Up | — |
| 119 not on diagram | Part # 22119E | Friction Module, A518/A618 1990-97 | — |
| 119 not on diagram | Part # 22119EA | Friction Module, A518/A618 1998-Up (W/Hi-Energy Direct Frictions)… | — |
| 119 not on diagram | Part # 22119EHP | Friction Module, A518/A618 (Hi-Perfromance) Red Eagle (Alto) 1990-97 | — |
| 119 not on diagram | Part # 22119ES1 | Friction Module, A518/A618 (Stage 1) 1990-Up | — |
| 119 not on diagram | Part # 22119G | Friction Module, 48RE 2003-Up (With 1 Sided Overdrive Direct Frictions)(When Out Use 22119GA) | — |
| 119 not on diagram | Part # 22119GA | Friction Module, 48RE 2003-Up (With 2 Sided Overdrive Direct Frictions & 93 Teeth Forward Frictions) | — |
| 119 not on diagram | Part # 22119GS1 | Friction Module, 48RE (Stage 1) 2003-Up | — |
| 119 not on diagram | Part # 22119HP | Friction Module, TF8/A727 BLUE PLATE SPECIAL(Raybestos) 62-Up | — |
| 119 not on diagram | Part # 22119S1 | Friction Module, A727 (Stage 1) 1962-Up | — |
| 120 not on diagram | Part # 12120 | Steel, A500 Overdrive Clutch (.068”) 1988-Up | 1 |
| 122 not on diagram | Part # 12122 | Steel, A518/A618/48RE Overdrive Direct Clutch (.069”) 1988-Up | 1 |
| 122 not on diagram | Part # 12122A | Steel, A500 Overdrive Direct clutch (.054”) 1996-Up | — |
| 122 not on diagram | Part # 22122E | Friction, 48RE Overdrive Direct Clutch (.048”) 12 Teeth (Hi-Energy) (1 Sided Friction, External Teeth) 2003-Up… | — |
| 126 | Part # 22126 | Steel, A727/A518/A618/48RE Forward & Direct Clutch (.070”) | 1 |
| 126 | Part # 22126B | Steel, A618 Direct Clutch (.085”) 1998-Up | 1 |
| 126 | Part # 22126BK | Steel, A618 Direct Clutch (.085”)(Kolene) 1998-Up | — |
| 126 | Part # 22126K | Steel, A727/A518/A618/48RE Forward / Direct Clutch (.070”) (Kolene) 1962-Up | 1 |
| 126 | Part # 22126X | Steel, A727/A518/A618/48RE Forward / Direct Clutch (.090”) (Oversize) 1962-Up | — |
| 137 not on diagram | Part # 22137EPPK | Friction/Steel Module, A518/A618 Red Eagle & Kolene Power Pack (Contains: Forward/Direct/ Overdrive Power Packs) | — |
| 137 not on diagram | Part # 22137GPPK | Friction/Steel Module, 48RE Red Eagle & Kolene Power Pack (Contains: Forward/Direct/ Overdrive Power Packs) 2003-Up | — |
| 139 not on diagram | Part # 22139 | Steel Module, A727 1962-Up | — |
| 139 not on diagram | Part # 22139E | Steel Module, A518/A618 1990-97 | — |
| 139 not on diagram | Part # 22139EA | Steel Module, A518/A618 1998-Up (Except 48RE) | — |
| 139 not on diagram | Part # 22139HP | Steel Module, A727 (Hi-Performance) 1971-97 | — |
| 140 not on diagram | Part # 12140 | Pressure Plate, A500 Overdrive Clutch (.373”)(Front)(Flat) 1988-92 (For 1993-Up Use 12141) | 1 |
| 140 not on diagram | Part # 22140B | Pressure Plate, 48RE Overdrive Clutch (.237”) (Front) 2003-Up | — |
| 141 not on diagram | Part # 12141 | Pressure Plate, A500 Overdrive Clutch (.216”)(Rear)(Flat) 1988-99 (Also Fits Overdrive Clutch (Front) (#140) 1993-99) | 1 |
| 141 not on diagram | Part # 22141G | Pressure Plate, 48RE Overdrive Clutch (.122”) Rear (Stepped) 2003-Up (.122” At Lugs And 235” At Step)… | — |
| 142 not on diagram | Part # 12142 | Pressure Plate, A500 Overdrive Direct Clutch (Front) (.212” Thick On Edge)(Stepped) | 1 |
| 142 not on diagram | Part # 12142A | Pressure Plate, A500 Overdrive Direct Clutch (Front) (.085” Thick On Edge)(Stepped) | — |
| 143 not on diagram | Part # 12143 | Pressure Plate, A500 Overdrive Direct Clutch (Rear) (.215”) | 1 |
| 146 | Part # 22146 | Pressure Plate, A727/A518/A618/48RE Forward / Direct Clutch (Top)(.285”Thick)(12 Teeth) | 1 |
| 149 | Part # 22149 | Pressure Plate, A727/A518/A618/48RE Forward Clutch (Bottom) (Beveled)(12 Teeth) | 1 |
| 670 | Part # 22670-1 | Input Clutch, A727 (19 Spline) 1962-66 | — |
| 741 not on diagram | Part # 12741CA-4 | Plate, A500 TCC Boost Valve (Superior) With Retainer To Hold Spring In | — |
| 907 | Part # 22907 | Piston, A727/A518/A618/48RE Kickdown Servo (Large Pin) 1972-Up | 1 |
| 907 | Part # 22907A | Piston, A727 Kickdown Servo (Small Pin Type) 1962-71 | — |
| 912 | Part # 22912 | Piston, A727/A518 Rear Servo (2.812”OD) 1966-Up (Superior) (Super Servo) | 1 |
| 912 | Part # 22912A | Piston, 48RE Rear Servo (2.479”OD) (Deisel) 1994-96 | 1 |
| 912 | Part # S22912B | Piston, 48RE Rear Servo (2.479”OD) 1997-Up (Sonnax) | 1 |
| 927 | Part # 12927 | Piston, A404/413/470/670 Accumulator (Aluminum) | 1 |
| 927 | Part # 12927HD | Piston, A404/A413/A470/A670 Accumulator (Aluminum With 4 Rings) | — |
| 927 | Part # 22927 | Piston, A404/413/470/670 Accumulator (Plastic) | — |
| 960 not on diagram | Part # 12960 | Piston, A500 Overdrive Direct Clutch 1960-Up | 2 |
| 964 | Part # 22964 | Piston, A727/A518/A618/48RE Forward Clutch (.780” Thick) 1962-Up | 1 |
| 964 | Part # 22964A | Piston, A727/A518/A618/48RE Forward Clutch (.840” Thick) 1962-Up | — |
| 965 | Part # 22965 | Piston, A727 Direct Clutch 1962-71 | 1 |
| 965 | Part # 22965A | Piston, A727/A518/A618/48RE Direct Clutch (.285” Thick At The Edge) 1972-Up | — |
| 965 | Part # 22965AA | Piston, A727/A518/A618/48RE Direct Clutch (.300” Thick At The Edge) 1972-Up | — |
| 970 not on diagram | Part # 12970 | Spring, A500 Overdrive Clutch Return | 1 |
| 974 | Part # 22974A | Spring, A727 Forward Clutch Disc Spring 1964-73 | 1 |
| 974 | Part # 22974B | Spring, A727 Forward Clutch Disc Spring 1974-Up | 1 |
| 975 | Part # 22975 | Spring Set, A727/A518/A618/48RE Direct Clutch Return 62-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 551 not on diagram | Part # 12551A | Drum, A500 Overdrive (6 Clutch) | 1 |
| 551 not on diagram | Part # 22551B | Drum, A618/48RE Overdrive (8 Clutch)(12 Or 24 Inner Lugs) | 1 |
| 554 | Part # 22554 | Drum, A727/A518/A618 Forward Clutch (Rear Clutch Retainer) 1962-Up | 1 |
| 555 | Part # 22555 | Drum, A727 Direct (Front Clutch) (4 Clutch) 1962-70 | — |
| 555 | Part # 22555A | Drum, A727/A518 Direct (Front Clutch) (3 Clutch) 1971-Up | — |
| 555 | Part # 22555B | Drum, A727/A518/A618/48RE Direct (Front Clutch) (4 Clutch) 1971-Up | 1 |
| 555 | Part # 22555G | Drum, 48RE Direct (Front Clutch) (5 Clutch) 2003-Up | 1 |
| 556 | Part # 22556 | Drum, A727 Reverse (Uses Slide On Race) (12 Rollers) 1962-87 | — |
| 556 | Part # 22556A | Drum, A727/A518 Reverse (Uses Slide On Race) (12 Rollers) 1988-91 (This Drum Takes A Washer #254 Under Snap Ring #890) | 1 |
| 556 | Part # 22556AB | Drum, A727/A518 Reverse (W/Press On Race) (14 Roller) 1990-Up (This Drum Is 6 1/4”OD At The Band Surface) | 1 |
| 556 | Part # 22556AC | Drum, A518/A618/48RE Reverse (W/Press On Race) (14 Roller) 1990-Up (This Drum Is 6 1/4”OD At The Band Surface)… | 1 |
| 570 not on diagram | Part # 12570 | Clutch Hub, A500 Overdrive Clutch (3” Tall) | 1 |
| 575 | Part # 22575 | Clutch Hub, A727 Direct Clutch 1962-77 | — |
| 575 | Part # 22575A | Clutch Hub, A727 Direct Clutch 1978-89 | — |
| 575 | Part # 22575B | Clutch Hub, A727/A518/A618/48RE Direct Clutch 1990-Up | 1 |
| 580 not on diagram | Part # 12580A | Planet, A500 Overdrive (4 Gear) Uses A Sun Gear With No I.D. Groove (Can Use 12580C) | 1 |
| 580 not on diagram | Part # 12580AA | Planet, A500 Overdrive (4 Gear) Straight Teeth | — |
| 580 not on diagram | Part # 12580AB | Planet, A518 Overdrive (4 Gear) (W/15 Degree Teeth) 1995-Up (Uses A Sun Gear W/1 I.D. Groove) Can Use 12580BB | 1 |
| 580 not on diagram | Part # 12580B | Planet, A500 Overdrive (5 Gear) (W/22 Degree Teeth) 1989-94 (Uses A Sungear With No I.D. Groove) Can Use 12580C | — |
| 580 not on diagram | Part # 12580BB | Planet, A500 Overdrive (5 Gear) (W/15 Degree Teeth) 1995-Up (Uses A Sun Gear W/1 I.D. Groove) | — |
| 580 not on diagram | Part # 12580C | Planet, A500 Overdrive (6 Gear) (W/22 Degree Teeth) 1989-94 (Uses A Sun Gear With No I.D. Groove) | — |
| 580 not on diagram | Part # 12580CA | Planet, A500 Overdrive (6 Gear) (W/15 Degree Teeth) 1995-Up | 1 |
| 580 not on diagram | Part # 22580B | Planet, A518/A618/48RE Overdrive (5 Gear, Straight Teeth) | 1 |
| 582 | Part # 22582 | Planet, A727 Forward (3 Gear) W/1st Design Splines) 1962-75 | — |
| 582 | Part # 22582A | Planet, A727/A518 Forward (3 Gear) W/2nd Design Splines 1976-95 | 1 |
| 582 | Part # 22582B | Planet, A727 Forward (4 Gear) W/1st Design Splines 1962-75 | — |
| 582 | Part # 22582C | Planet, A727/A518/A618 Forward (4 Gear) W/2nd Design Splines 1976-95 | 1 |
| 582 | Part # 22582CA | Planet, A727/A518/A618 Forward (4 Gear) W/3rd Design Splines 1996-Up | — |
| 582 | Part # 22582CS | Planet, A727/A518/A618 Forward (4 Gear, Straight Teeth) W/2nd Design Splines 1976-95 | — |
| 582 | Part # 22582D | Planet, A727/A518/A618 Forward (5 Gear, Aluminum) W/2nd Design Splines 1976-95 | — |
| 582 | Part # 22582DA | Planet, A727/A518/A618 Forward (5 Gear, Aluminum) W/3rd Design Splines 1996-Up… | — |
| 582 | Part # 22582E | Planet, A727/A518/A618 Forward (5 Gear, Steel) W/3rd Design Splines 1996-Up | 1 |
| 582 | Part # 22582F | Planet, 48RE Forward (6 Gear, Steel) 2003-08 | 1 |
| 584 | Part # 22584 | Planet, A727/A518 Rear (3 Gear) 1962-03 | 1 |
| 584 | Part # 22584A | Planet, A727/A518/A618 Rear (4 Gear) 1962-03 (Can Fit 48RE If (2) 22238A Are Used) | 1 |
| 584 | Part # 22584AS | Planet, A727/A518/A618 Rear (4 Gear, Straight Teeth) 1965-03 (Can Fit 48RE If (2) 22238A Are Used) | — |
| 584 | Part # 22584C | Planet, A727/A518/A618 Rear (6 Gear) 1965-03 (Use To Replace The 3 or 4 Gear Rear Planet)(Aluminum Housing)… | — |
| 584 | Part # 22584D | Planet, 48RE Rear (6 Gear) 2003-08 | 1 |
| 590 not on diagram | Part # 12590A | Ring Gear, A500 Overdrive Planet (Angled Teeth) 1989-94 (Has No I.D. Groove Between Park Lugs & Drum Lugs) | 1 |
| 590 not on diagram | Part # 12590AA | Ring Gear, A500 Overdrive Planet (Straight Teeth) | 1 |
| 590 not on diagram | Part # 12590AB | Ring Gear, A500 Overdrive (W/15 Degree Angled Teeth) Has 1 I.D. Groove Between Park Lugs & Drum Lugs | 1 |
| 592 | Part # 22592 | Ring Gear, A727/A518/A618/48RE Front Planet (Uses 62 Teeth Forward Friction) 1962-Up | 1 |
| 592 | Part # 22592G | Ring Gear, 48RE Front Planet (Uses 93 Teeth Forward Friction) 2003-Up | 1 |
| 594 | Part # 22594 | Ring Gear, A727/A518/A618/48RE Rear Planet (Annulus) 1962-Up | 1 |
| 594 | Part # 22594G | Ring Gear, 48RE Rear Planet (Annulus) 2003-Up | 1 |
| 610 not on diagram | Part # 12610A | Sun Gear, A500 Overdrive (22 Degree Angled Teeth) 1989-94 | 1 |
| 610 not on diagram | Part # 12610AA | Sun Gear, A500 Overdrive (Straight Teeth) | 1 |
| 610 not on diagram | Part # 12610AB | Sun Gear, A500 Overdrive (15 Degree Angled Teeth) 1995-Up | 1 |
| 612 | Part # 22612 | Sun Gear, A727/A518/A618/48RE Forward & Rear Planet (Fits The Thin Shell) No Groove 1962-03 | 1 |
| 612 | Part # 22612G | Sun Gear, 48RE Forward & Rear Planet (Fits The Thick Shell) 1 Groove 2003-Up | 1 |
| 622 | Part # 22622 | Shell, A727/A518/A618 Driving (W/3 Holes For Washer) 1962-95 (.175” Thick At Lugs) | 1 |
| 622 | Part # 22622A | Shell, A518/A618 Driving (W/3 Holes For Washer)(.175” Thick At The Lugs) 1996-02 | — |
| 622 | Part # 22622G | Shell, 48RE Driving (W/6 Holes For Washer) 2003-08 (.240” Thick At The Lugs) | 1 |
| 622 | Part # 22622GK | Shell W/Sun Gear, 48RE Driving (With 6 Holes For Washer)(.240” Thick At The Lugs) 2003-08 (Comes With Sun Gear # 612) | — |
| 634 | Part # 22634 | Support, A727 Output Shaft (4 Bolt) 1962-89 | 1 |
| 634 | Part # 22634A | Support, A727 Output Shaft (6 Bolt) 1989-94 | 1 |
| 634 | Part # 22634B | Support, A518 Piston Retainer (Uses A 2 Tab Washer #254) W/Governor Feed Holes 1989-Up Comes W/2 Plugs To Retro Fit… | 1 |
| 634 | Part # 22634BA | Support, A518 Piston Retainer (Uses A 1 Tab Washer #254) W/Governor Feed Holes 1989-90 | — |
| 634 | Part # 22634C | Support, A518/A618/48RE Piston Retainer (Uses A 2 Tab Washer #254) No Tubes (No Governor Feed Holes) 1996-03… | 1 |
| 634 | Part # S22634B-OS | Support, A518 Piston Retainer (Uses A 2 Tab Washer #254) (Oversized) Reverse Drum Must Be Bored (Sonnax) | — |
| 650 not on diagram | Part # 12650 | Sprag, A500 Overrun Clutch (Overdrive) 1990-Up | 1 |
| 654 | Part # 22654 | Sprag, A727/A518 Rear Spring & Roller Kit (12 Rollers) | — |
| 654 | Part # 22654A | Sprag, A727/A518/A618/48RE Rear (14 Rollers With Plastic Cage) 1991-Up | 1 |
| 670 | Part # 22670 | Input Shaft, A727 Non Lock-Up (24 Spline) 1967-77 | — |
| 670 | Part # 22670A | Input Shaft, A727 Non Lock-Up (24 Spline) 1978-89 | — |
| 670 | Part # 22670AA | Input Shaft, A727/A518 Non Lock-Up (No Bushing Type) 1990-Up (1 1/8” OD On Land Where Stator Bushing Rides) | — |
| 670 | Part # 22670B | Input Shaft, A727 Lock-Up (23 Spline) W/Bushing 1978-89 | — |
| 670 | Part # 22670BA | Input Shaft, A727/A518 Lock-Up (No Bushing Type) 1990-Up (1 1/8”OD On Land Where Stator Bushing Rides) | — |
| 670 | Part # 22670BB | Input Shaft, A727/A518/A618/48RE Lock-Up (No Bushing Type) 1992-Up (1 1/4”OD On Land Where Stator Bushing Rides) | 1 |
| 674 not on diagram | Part # 22674 | Shaft, A518/A618/48RE Intermediate 1990-93 (2nd Design Splines) Has Only 1 Small Hole Between The 2 Overdrive Sun Gear… | 1 |
| 674 not on diagram | Part # 22674A | Shaft, A518/A618/48RE Intermediate 1994-95 (2nd Design Splines) Has 2 Small Hole Between The 2 Overdrive Sun Gear… | — |
| 674 not on diagram | Part # 22674B | Shaft, A518/A618/48RE Intermediate 1996-Up (3rd Design Splines) | 1 |
| 678 | Part # 12678E | Output Shaft, A500 2WD (1 1/16” Long Key Way Slot) | — |
| 678 | Part # 12678EA | Output Shaft, A500 2WD (1 7/16” Long Key Way Slot) | — |
| 678 | Part # 12678EB | Output Shaft, A500 2WD (13 Teeth Speed-O Gear) No Key Way | — |
| 678 | Part # 12678EC | Output Shaft, A500 2WD (No Speed-O Gear) No Key Way | — |
| 678 | Part # 12678F | Output Shaft, A500 4x4 (9 1/4” Long) (1 1/16” Long Key Way Slot) | — |
| 678 | Part # 12678FA | Output Sahft, A500 4x4 (9 1/4” Long) (1 7/16” Long Key Way Slot) | — |
| 678 | Part # 12678G | Output Shaft, A500 4x4 (5 1/4” Long) (1 1/8” Long Slpines) (W/Pilot On Rear Of Shaft) | — |
| 678 | Part # 12678GA | Output Shaft, A500 4x4 (5 1/4” Long) (1 7/8” Long Splines) | — |
| 678 | Part # 22678 | Output Shaft, A727 2WD (27” Long) 1966-75 | — |
| 678 | Part # 22678A | Output Shaft, A727 2WD (27” Long) (.618” Pilot) 1976-89 | — |
| 678 | Part # 22678AA | Output Shaft, A727 2WD (27” Long) (.345” Pilot) 1990-94 | — |
| 678 | Part # 22678AB | Output Shaft, A727 2WD (27” Long) (.618” Pilot) 1976-89 (Bolt On Yoke) | — |
| 678 | Part # 22678B | Output Shaft, A727 2WD (21” Long) 1966-75 | — |
| 678 | Part # 22678BA | Output Shaft, A727 2WD (21” Long) (.618” Pilot) 1976-89 | — |
| 678 | Part # 22678C | Output Shaft, A727 4x4 (17” Long) International | — |
| 678 | Part # 22678D | Output Shaft, A727 2WD (16 3/4” Long) (.618” Pilot) Bolt On Yoke 1976-89 | — |
| 678 | Part # 22678DA | Output Shaft, A727 2WD (16 3/4” Long) (.345” Pilot) Bolt On Yoke 1990-94 | — |
| 678 | Part # 22678DB | Output Shaft, A727 2WD (17” Long) (.345” Pilot) Bolt On Yoke 1990-94 | — |
| 678 | Part # 22678E | Output Shaft, A727 4x4 (13 1/2” Long) (Jeep) (2 3/4” To Snap Ring Groove From End Of Shaft) | — |
| 678 | Part # 22678F | Output Shaft, A727 4x4 (13 1/4” Long) (Jeep) (3” To Snap Ring Groove From End Of Shaft) | — |
| 678 | Part # 22678G | Output Shaft, A727 4x4 (16 1/4” Long) (3 5/8” To Snap Ring Groove From End Of Shaft) | — |
| 678 | Part # 22678H | Output Shaft, A727 4x4 (16 1/4” Long) (3 1/4” To Snap Ring Groove From End Of Shaft) | — |
| 678 | Part # 22678J | Output Shaft, A727 4x4 (17 1/2” Long) (4 3/4” To Snap Ring Groove From End Of Shaft) | — |
| 678 | Part # 22678JA | Output Shaft, A727 4x4 (17 1/2” Long) 1974-79 | — |
| 685 | Part # 12685 | Support, A500 Governor (3 Ring) | 1 |
| 685 | Part # 12685A | Support, A500 Governor (2 Ring) | — |
| 685 | Part # 22685 | Support, A727 Governor | — |
| 741 not on diagram | Part # S12741-7 | Neutral Safety Back-Up Insulator, A727/A518 (This Replaces The Plastic Piece On The Manual Shaft Lever (Rooster Comb)… | — |
| 760 | Part # 22760 | Case, A727 (225) (6 Cylinder) (Push Button) 1962-65 | — |
| 760 | Part # 22760A | Case, A727 (273/318) (Push Button) 1962-65 | — |
| 760 | Part # 22760AA | Case, A727 (383/413/426/440) (Push Button) 1962-65 | — |
| 760 | Part # 22760AB | Case, A727 (383/440) 1966-71 | — |
| 760 | Part # 22760AD | Case, A727 (383/440) 1972-77 | — |
| 760 | Part # 22760AF | Case, A727 (225) (6 Cylinder) 1966-71 | — |
| 760 | Part # 22760AG | Case, A727 (225) (6 Cylinder) Non Lock-Up 1972-77 | — |
| 760 | Part # 22760AH | Case, A727 (225) (6 Cylinder) Lock-Up (4 Bolt Support) 1978-Up | — |
| 760 | Part # 22760B | Case, A727 (318/360) 1966-71 | — |
| 760 | Part # 22760C | Case, A727 (318/360) 1972-77 (Will Retro Fit Back To 1966) (Can Use 22760E) | — |
| 760 | Part # 22760D | Case, A727 (318/360) Non Lock-Up 1978-88 (Can Use 22760E) | — |
| 760 | Part # 22760E | Case, A727 (318/360) Lock-Up 1978-88 | — |
| 760 | Part # 22760F | Case, A727 (318/360) L/Up (6 Bolt Support) 1989-Up | — |
| 760 | Part # 22760FA | Case, A727 (318/360) Lock-Up (6 Bolt Support) W/Cut Out Bell | — |
| 760 | Part # 22760G | Case, A727 (318/360) (Van) W/Timming Hole In Bell | — |
| 760 | Part # 22760H | Case, A727 (400/440) Non Lock-Up 1978-88 | — |
| 760 | Part # 22760HA | Case, A727 (400/440) (Van) W/Timming Hole In Bell | — |
| 760 | Part # 22760J | Case, A727 (400/440) Lock-Up 1978-88 | — |
| 760 | Part # 22760K | Case, A727 International Truck | — |
| 760 | Part # 22760L | Case, A727 AMC Non Lock-Up | — |
| 760 | Part # 22760M | Case, A727 AMC Lock-Up | — |
| 760 | Part # 22760N | Case, A727 Diesel(Cummins)(6 Bolt Support) 1989-94 | — |
| 760 | Part # 22760P | Case, A727 Diesel(4 Cyl, Mitsubishi) 1989-94 | — |
| 760 | Part # 22760Q | Case, A518 (318/360) (12 Roller Sprag) 1990-91 | — |
| 760 | Part # 22760R | Case, A518 (318/360) (14 Roller Sprag) (2.812”OD Rear Servo) .900”OD Case Connector (Driver Side Starter) 16 Round… | — |
| 760 | Part # 22760RA | Case, A518 (318/360) (14 Roller Sprag) Screw In Neutral Safety Switch (1.080”OD Case Connector) (Driver Side Starter)… | — |
| 760 | Part # 22760RAA | Case, A518 (318/360) (14 Roller Sprag) Push In Neutral Safety Switch… | — |
| 760 | Part # 22760RB | Case, A518 (318/360) (14 Roller Sprag) (2.812”OD Rear Servo) .900”OD Case Connector (Driver Side Starter) 17 Round… | — |
| 760 | Part # 22760RC | Case, A518 (318/360) (14 Roller Sprag) Screw-In Neutral Safety Switch… | — |
| 760 | Part # 22760RD | Case, A518 (318/360) (14 Roller Sprag) Push-In Neutral Safety Switch… | — |
| 760 | Part # 22760S | Case, A518 Diesel (14 Roller Sprag) (2.812”OD Rear Servo) .900”OD Case Connector 1991-94 | — |
| 760 | Part # 22760SA | Case, A618 Diesel (14 Roller Sprag)(2.479”OD Rear Servo) .900”OD Case Connector 1991-94 | — |
| 760 | Part # 22760SB | Case, A618 Diesel (14 Roller Sprag) (2.812”OD Rear Servo)(1.080”OD Case Connector) 1995-02 | — |
| 760 | Part # 22760SC | Case, A618 Diesel (14 Roller Sprag)(2.479”OD Rear Servo)(1.080”OD Case Connector)… | — |
| 760 | Part # 22760SD | Case, 48RE (V-10 & Diesel (14 Roller Sprag) (2.479”OD Rear Servo) 1.080”OD Case Connector… | — |
| 760 | Part # 22760SG | Case, 48RE Diesel (14 Roller Sprag) 2.479”OD Rear Servo (1.080”OD Case Connector) With 1 Threaded Boss On Bell For… | 1 |
| 760 | Part # 22760SH | Case, 48RE Diesel (14 Roller Sprag) 2.479”OD Rear Servo (1.080”OD Case Connector) No Threaded Boss On Bell For Shift… | — |
| 760 | Part # 22760SJ | Case, 48RE Diesel (With 2 Bosses On The Side Of The Case For The Throttle Actuator Motor) 2005-Up | — |
| 760 | Part # 22760T | Case, A518 (318/360) (14 Roller Sprag) (2.812”OD Rear Servo) .900”OD Case Connector (Passenger Side Starter) 1991-94 | — |
| 760 | Part # 22760TA | Case, A518 (318/360) (14 Roller Sprag) (2.812”OD Rear Servo) 1.080”OD Case Connector (Passenger Side Starter) 1995-02 | — |
| 770 | Part # 12770B | Extension Housing, A500 2WD (Speed-O Gear Type) | — |
| 770 | Part # 12770BK | Overdrive Assembly, A500 2WD Governor Type (W/Speed-O) No Sensor (4 Gear Planet) | — |
| 770 | Part # 12770C | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (Uses A Rear Seal) (Uses A 2 Bolt Mount)… | — |
| 770 | Part # 12770CA | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (No Rear Seal) (With .637” Wide Park Pawl) | — |
| 770 | Part # 12770CB | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (Uses A Rear Seal) (Uses A 3 Bolt Mount)… | — |
| 770 | Part # 12770CBK | Overdrive Assembly, A500 4x4 (15 7/8” Long) Governor Type (No Speed-O) No Sensor (Uses A Rear Seal)… | — |
| 770 | Part # 12770CC | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (Uses A Rear Seal) (Uses A 5 Bolt Mount)… | — |
| 770 | Part # 12770CCK | Overdrive Assembly, A500 4x4 (15 7/8” Long) Governor Type (No Speed-O) No Sensor (Uses A Rear Seal)… | — |
| 770 | Part # 12770CK | Overdrive Assembly, A500 4x4 (15 7/8” Long) Governor Type (No Speed-O) No Sensor (Uses A Rear Seal)… | — |
| 770 | Part # 12770D | Extension Housing, A500 2WD (No Governor) (With Speed-O) W/Sensor | — |
| 770 | Part # 12770DA | Extension Housing, A500 2WD (No Governor) (No Speed-O) W/Sensor | — |
| 770 | Part # 12770DAK | Overdrive Assembly, A500 2WD (No Governor) (No Speed-O) W/Sensor (4 Gear Planet) | — |
| 770 | Part # 12770DK | Overdrive Assembly, A500 2WD (No Governor) (W/Speed-O) W/Sensor (4 Gear Planet) | — |
| 770 | Part # 12770E | Extension Housing, A500 4x4 (10 7/8” Long) (No Speed-O) W/Sensor (Can Use 12770EB) | — |
| 770 | Part # 12770EAK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (No Speed-O) W/Sensor (W/ 1/2” Pilot On End Of Shaft) W/Side… | — |
| 770 | Part # 12770EB | Extension Housing, A500 4x4 (10 7/8” Long) No Governor (W/Speed Sensor) (Holds 4 or 6 Overdrive Clutch) W/2 Mounting… | — |
| 770 | Part # 12770EBK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (Holds 4 or 6 Overdrive Clutch) (W/Speed Sensor) W/2 Mounting… | — |
| 770 | Part # 12770EC | Extension Housing, A500 4x4 (10 7/8” Long) No Governor (Holds 4 or 6 Overdrive Clutch) (W/Speed Sensor) W/3 Mounting… | — |
| 770 | Part # 12770ECK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (Holds 4 or 6 Overdrive Clutch) (W/Speed Sensor) W/3 Mounting… | — |
| 770 | Part # 12770EK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (No Speed-O) W/Sensor (Output Shaft Splined To End… | — |
| 770 | Part # 22770 | Extension Housing, A727 2WD (18 1/2”) W/Out Weight Bracket Holes (Snap Ring Retainer On Bottom Of Housing) 1966-Up | — |
| 770 | Part # 22770A | Extension Housing, A727 2WD (18 1/2”) With Weight Bracket Holes 1966-Up | — |
| 770 | Part # 22770AA | Extension Housing, A727 2WD (18 1/2”) W/Out Weight Bracket Holes (Snap Ring Retainer On Side Of Housing) | — |
| 770 | Part # 22770AB | Extension Housing, A727 2WD (Push Button) Bolt On Flange 1962-64 | — |
| 770 | Part # 22770AC | Extension Housing, A727 2WD (Push Button) Slip On Yoke 1965 | — |
| 770 | Part # 22770B | Extension Housing, A727 2WD (8” Long) Bolt On Yoke Type (2 1/2”OD Rear Seal) | — |
| 770 | Part # 22770BA | Extension Housing, A727 2WD (8 1/4” Long) Bolt On Yoke Type (2 3/4”OD Rear Seal) | — |
| 770 | Part # 22770C | Extension Housing, A727 4x4 (10 1/4” Long) Cast Iron | — |
| 770 | Part # 22770D | Extension Housing, A727 4x4 (8 1/2” Long) Cast Iron | — |
| 770 | Part # 22770DA | Extension Housing, 48RE 2WD (No Speed-O) (With Sensor) 2003-Up (Uses A 2.985”OD Rear Seal) (With .637” Wide Park Pawl) | — |
| 770 | Part # 22770DAK | Overdrive Assembly, 48RE 2WD (No Speed-O)(With Sensor) 2003-Up (Uses A 2.985”OD Rear Seal)(With .637” Wide Park Pawl) | — |
| 770 | Part # 22770DB | Extension Housing, 48RE 2WD (No Speed-O)(With Sensor) 2003-Up (With .810” Wide Park Pawl) | — |
| 770 | Part # 22770DBK | Overdrive Assembly, 48RE 2WD (No Speed-O)(With Sensor) 2003-Up (With .810” Wide Park Pawl) | — |
| 770 | Part # 22770DC | Extension Housing, 48RE 4x4 (10 7/8” Long)(No Governor)(With Sensor) 2003-Up (With 2 Mounting Bosses On Drivers Side)… | — |
| 770 | Part # 22770E | Extension Housing, A727 4x4 (6 7/8” Long) Aluminum | — |
| 770 | Part # 22770F | Extension Housing, A727 4x4 (6 5/8” Long) Aluminum | — |
| 770 | Part # 22770G | Extension Housing, A727 4x4 (8 3/8” Long) Aluminum | — |
| 770 | Part # 22770H | Extension Housing, A727 4x4 (10 1/4” Long) Aluminum Up To 1989 | — |
| 770 | Part # 22770HA | Extension Housing, A727 4x4 (10 1/4” Long) Aluminum (W/ 7/8” Bolts) 1990-Up | — |
| 771 | Part # 12771 | Cover, A727/A518/A618/48RE Output Shaft Snap Ring (With Bolts) 1962-Up | — |
| 774 | Part # 12774 | Speed-O Housing, A727/A518/A618/48RE (Aluminum) (Cable Type) 1965-Up | — |
| 774 | Part # 12774B | Speed-O Housing, A727/A518/A618/48RE (Plastic) With 3 Round Prong Connectors | — |
| 774 | Part # 12774BA | Speed-O Housing, A727/A518/A618/48RE (Plastic) With 3 Flat Blade Connectors | — |
| 848 | Part # 12848 | Gear, A727/A518/A618/48RE Driven Speed-O (24 Teeth) With 3” Long Steel Shaft 1966-94 | — |
| 848 | Part # 12848C | Gear, A727/A518/A618/48RE Driven Speed-O (26 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848D | Gear, A727/A518/A618/48RE Driven Speed-O (27 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848F | Gear, A727/A518/A618/48RE Driven Speed-O (29 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848FA | Gear, A727/A518/A618/48RE Driven Speed-O (29 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848G | Gear, A727/A518/A618/48RE Driven Speed-O (30 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848H | Gear, A727/A518/A618/48RE Driven Speed-O (31 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848HA | Gear, A727/A518/A618/48RE Driven Speed-O (31 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848J | Gear, A727/A518/A618/48RE Driven Speed-O (32 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848JA | Gear, A727/A518/A618/48RE Driven Speed-O (32 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848K | Gear, A727/A518/A618/48RE Driven Speed-O (33 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848KA | Gear, A727/A518/A618/48RE Driven Speed-O (33 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848L | Gear, A727/A518/A618/48RE Driven Speed-O (34 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848LA | Gear, A727/A518/A618/48RE Driven Speed-O (34 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848M | Gear, A727/A518/A618/48RE Driven Speed-O (35 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848MA | Gear, A727/A518/A618/48RE Driven Speed-O (35 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848N | Gear, A727/A518/A618/48RE Driven Speed-O (36 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848NA | Gear, A727/A518/A618/48RE Driven Speed-O (36 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848P | Gear, A727/A518/A618/48RE Driven Speed-O (37 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848Q | Gear, A727/A518/A618/48RE Driven Speed-O (38 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848QA | Gear, A727/A518/A618/48RE Driven Speed-O (38 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848S | Gear, A727/A518/A618/48RE Driven Speed-O (40 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848ZJ | Gear, A727/A518/A618/48RE Driven Speed-O (56 Teeth) With 3 “ Long Steel Shaft | — |
| 848 | Part # 12848ZK | Gear, A727/A518/A618/48RE Driven Speed-O (57 Teeth) With 3” Long Steel Shaft | — |
| 995 | Part # 22995 | Park Pawl Assembly, A727 66-Up | — |
| 996 | Part # 12996C-1 | Adapter, A727/A518 (For The S12996CK Kit) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 447 not on diagram | Part # 12447 | Recalibrator, Chrysler Electronic Speedometers | — |
| 447 not on diagram | Part # 12447A | Inverter, A500 Overdrive | — |
| 483 not on diagram | Part # 12483P | Park Reaction Plug, A727 | — |
| 487 not on diagram | Part # 12487D | Hitch Pins, Chrysler | — |
| 487 not on diagram | Part # 22487 | E-Clip, Chrysler Shift Linkage (10 Per Pack) Sonnax | — |
| 622 | Part # 22622GAK | Shell Asembly, 48RE Driving (With 6 Holes For Washer)(.240” Thick At The Lugs) 2003-08 (Contains: # 622, 243 & Two 884) | — |
| 681 not on diagram | Part # 12681A-5 | E-Clip, A727/A518 Holds Valves In Governor | — |
| 688 not on diagram | Part # 12688 | Bracket, A727/A518/A500/A904 Governor Bolt 1962-Up | — |
| 697 not on diagram | Part # 12697 | Retainer, A500 Governor Support | 1 |
| 741 not on diagram | Part # S12741-4 | Bracket, A500 Holds Transducer (#415 Sensor) To Valve Body (4th Design)(Metal, 3 Bolt Holes) 2000-Up | — |
| 741 not on diagram | Part # S12741C-4 | Retainers, A500 TCC Boost Valve Spring (Sonnax) (5 Pieces) | — |
| 741 not on diagram | Part # S22741NK | Sleeve & Plug, A727/A518/A618/48RE Line Pressure (.200”OD Plug)(Sonnax) | — |
| 761 not on diagram | Part # 22761-2C | Sleeve, A727/A500 Shift Linkage Shaft (Use With T-56361-TL) | — |
| 761 not on diagram | Part # 22761MB | Bracket, A500 (Holds Push-In Neutral Safety Switch To Case) Screws Into Case W/2 Hole Bracket & Washers… | — |
| 761 not on diagram | Part # 22761S | Sleeve, A500 (Presses Into Case Connector Hole On Late Model Cases With .900”OD Hole) | — |
| 775 not on diagram | Part # 22775 | Bolt, 948TE/ZF9HP48 Converter (5/16 X 24X 1/2”Hex) | — |
| 775 not on diagram | Part # 44775BA | Bolt, 180/180C/4L30E Fine Thread (No Flange) (3/8 X 24) | — |
| 781 | Part # 12781A | Bolt, A518/A618/48RE Extension Housing To Case | — |
| 839 | Part # 44839 | Magnet, 250/250C/350/350C Pan (Rectangular) 1969-86 | — |
| 839 | Part # 44839A | Magnet, 250/250C/350/350C Pan (Round) 1969-86 | 1 |
| 842 | Part # 12842 | Bracket, A727 Speed-O Hold Down 1966-Up | — |
| 844 not on diagram | Part # 12844 | Key, A500 Holds Governor Support To Shaft (Half Moon) | — |
| 844 not on diagram | Part # 12844A | Key, A500 Holds Governor Support To Shaft (Rectangle) | — |
| 860 not on diagram | Part # 12860 | Snap Ring, A500 Overdrive Clutch (.051” Thick)(6 3/8”OD)(Waved) 1988-Up | 1 |
| 861 not on diagram | Part # 12861 | Snap Ring, A500 Overdrive Clutch Front | 1 |
| 862 not on diagram | Part # 12862 | Snap Ring, A500 Overdrive Clutch (Flat) | 1 |
| 863 not on diagram | Part # 12863 | Snap Ring, A500 Overdrive Direct Drum To Ring Gear | 1 |
| 864 not on diagram | Part # 12864 | Snap Ring, A500 Overdrive Direct Clutch (Front) (.079” Thick)(5 13/16”OD) 1988-Up | 1 |
| 866 not on diagram | Part # 12866 | Snap Ring, A500 Overdrive Sun Gear (Round) | 1 |
| 867 not on diagram | Part # 12867 | Snap Ring, A500 Overdrive Sun Gear (Flat) | 1 |
| 868 not on diagram | Part # 12868 | Snap Ring, A500 Overdrive Ring Gear To Output Shaft | 1 |
| 877 | Part # 22877 | Snap Ring, A727/A518 Forward Drum (Bottom, Wavy) 1962-Up | 1 |
| 878 | Part # 22878 | Snap Ring, A727/A518/A618/48RE Forward & Direct Clutch (.062”) | 1 |
| 878 | Part # 22878A | Snap Ring, A727/A518/A618/48RE Forward & Direct Clutch (.074”) | 1 |
| 878 | Part # 22878B | Snap Ring, A727/A518/A618/48RE Forward & Direct Clutch (.088”) 1962-Up | 1 |
| 878 | Part # 22878C | Snap Ring, A727/A518/A618/48RE Forward & Direct Clutch (.106”) | 1 |
| 878 | Part # 22878F | Snap Ring, A727/A518/A618/48RE Forward & Direct Clutch (.052”)(Waved) | 1 |
| 878 | Part # 22878K | Snap Ring Set, A727/A518/A618/48RE Forward And Direct Clutch (4 Per Set) Contains: 1 Each Of (.062”)(.074”)(.088”)… | — |
| 879 | Part # 22879 | Snap Ring, A727/A518/A618/48RE Holds Retainer To Direct Drum 1962-Up | 1 |
| 880 | Part # 22880 | Snap Ring, A727/A518/A618/48RE Holds Input Shaft To Forward Hub 1962-Up | 1 |
| 884 | Part # 22884 | Snap Ring, A727/A518/A618/48RE Holds Sun Gear To Shell 1962-Up | 1 |
| 889 | Part # 22889 | Snap Ring, A727 Rear Bearing To Output Shaft (Front) 1962-Up | — |
| 890 | Part # 22890 | Snap Ring, A727/A518/A618 Holds Reverse Drum To Output Shaft Support | 1 |
| 891 not on diagram | Part # 12891 | Snap Ring, A500 Holds Bearing #271 On Output Shaft | 1 |
| 892 not on diagram | Part # 12892 | Snap Ring, A500 Oil Distributor Rear | 1 |
| 893 not on diagram | Part # 12893 | Snap Ring, A500 Output Bearing To Output Shaft | 1 |
| 894 | Part # 22894 | Snap Ring, A727/A518/A618/48RE Front Planet To Output Shaft 62-Up | 1 |
| 895 | Part # 22895 | Snap Ring, A727 Holds Rear Bearing To Output Shaft (Rear) 62-Up | — |
| 896 | Part # 22896 | Snap Ring, A727/A518/A618/48RE Holds Front Servo In Case 62-Up | 1 |
| 897 | Part # 12897A | Snap Ring, A500 Holds Output Shaft Bearing To Extension Housing (W/2 Ears) | 1 |
| 897 | Part # 22897 | Snap Ring, A727 Holds Output Shaft Bearing To Extension Housing 62-Up | — |
| 898 | Part # 22898 | Snap Ring, A727/A518 Holds Governor To Output Shaft 62-Up | — |
| 906 | Part # 22906A | Spring, A727/A518/A618/48RE Kickdown Servo (Outer) 1962-Up | 1 |
| 906 | Part # 22906B | Spring, A727/A518 Kickdown Servo (Inner) 1962-Up | 1 |
| 909 | Part # 22909 | Retainer, A727/A518/A618/48RE Kickdown Servo Spring (Cover) (Large Pin Type) 1972-Up | 1 |
| 911 | Part # 22911 | Spring, A727/A518 Rear Servo Return 62-Up | 1 |
| 912 | Part # 22912AK | Piston & Pin, A618/48RE Rear Servo (2.479”OD) 2000-Up (Superior) (Super Servo) | — |
| 913 | Part # S12913K | Pin/Plug, A727/A518/A618/48RE Reverse Servo (Sonnax) (Contains: Pin/Plug, O-Ring & Retaining Ring) | — |
| 914 | Part # 22914 | Retainer, A727/A518/A618/48RE Rear Servo Spring (2.856”OD) (Cupped) | — |
| 914 | Part # 22914A | Retainer, A518/A618 Rear Servo Spring (2.510”OD) (Top Hat) | 1 |
| 914 | Part # 22914B | Retainer, A618/48RE Rear Servo Spring (2.525”OD) Flat (Diesel) | 1 |
| 919 | Part # 22919 | Adjusting Bolt, A727/A518/A618/48RE Front Band | 1 |
| 926 | Part # 22926 | Spring, A404/A413/A470/A670 Accumulator Return (1.525” Tall) | 2 |
| 926 | Part # 32926 | Spring, A404/A413/A470/A670 Accumulator Return (1.060” Tall) | — |
| 936 not on diagram | Part # 12936K | Spring, A500 3-4 Accumulator (.060”OD Wire) (2.750” Long) | — |
| 936 not on diagram | Part # 22936 | Spring, A500 3-4 Accumulator (.122”OD Wire) (2.350” Long) | — |
| 985 | Part # 22985 | Retainer, A727/A518/A618/48RE Direct Clutch Return 62-Up | 1 |
| 989 | Part # 22989 | Retainer, A727/A518 Rear Sprag 62-1990 (12 Rollers) | 1 |
| 989 | Part # 22989A | Retainer, A727/A518/A618/48RE Rear Sprag 91-Up (14 Rollers) | — |
| 994 | Part # 22994 | Park Rod, A727 62-Up | — |
| 994 | Part # 22994A | Park Rod, A518/A618/48RE | 1 |
| 996 | Part # 12996 | Fitting, A727 Cooler Line (5/16” Line x 1/8” Pipe) Screw In Flared 62-Up | — |
| 996 | Part # 12996B | Fitting, A727 Cooler Line (90 Degree Elbow) (5/16” Line x 1/8” Pipe) Screw In Flared (Can Use 26996) 62-Up | — |
| 996 | Part # 12996C | Fitting, A727/A518/A618/48RE Cooler Line (3/8” Line x 1/4” Pipe) 1/4” Screw In Flared Male (On Case Side) For Push In… | — |
| 996 | Part # 12996D | Fitting, A500 Cooler Line (3/8” Line x 1/4” Pipe) Push In With Wire Type Clip | — |
| 996 | Part # 22996 | Fitting, A727/A618/48RE Cooler Line (1/2” Line x 1/4” Pipe) Screw In Flared (Diesel) | — |
| 996 | Part # 22996A | Fitting, A500 Cooler Line (3/8” Line x 1/4” Pipe) Push In (Gas) | 1 |
| 996 | Part # 22996B | Fitting, A518/A618/48RE Cooler Line (1/2” Line x 1/4” Pipe) Push In (Diesel) | 1 |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.