CFT30 parts diagram
Positions:
135 total, 107 on the diagram
Parts:
164 total, 19 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 206002A | Overhaul Kit, CFT30 2005-Up | — |
| 004 not on diagram | Part # 206004A | Master L/Steels Kit, CFT30 2005-Up | — |
| 006 not on diagram | Part # 206006A | Master W/Steels Kit, CFT30 2005-Up | — |
| 564 not on diagram | Part # 206564A | Piston Kit, CFT30 Forward Clutch (Steel Piston, .700”Thick, 5.560”OD, 1.815”ID) 2005-Up | — |
| 566 not on diagram | Part # 206566A | Piston Kit, CFT30 Reverse Clutch (Steel Piston, 6 1/4”OD) 2005-Up | — |
| 701 | Part # 206701AK | Guide Set, CFT30 Pulley Belt (Plastic, 2 Pieces Snap Together)(Upper & Lower)(Takes 2 Sets Per Transmission) 2005-Up | — |
| 776 | Part # 206776AK | Bolt Set, CFT30 Bell Housing To Case (26 Pieces) 2005-Up | — |
| 777 | Part # 206777AK | Bolt Set, CFT30 Outer Pump Housing To Pump Body (8 Pieces) 2005-Up | — |
| 778 | Part # 206778-1AK | Bolt Set, CFT30 Converter Reactor To Bell Houisng (7 Pieces) 2005-Up | — |
| 778 | Part # 206778AK | Bolt Set, CFT30 Pump To Bell Housing (8 Pieces) 2005-Up | — |
| 779 not on diagram | Part # 206779AK | Bolt Set, CFT30 Bottom Pan (22 Pieces) 2005-Up | — |
| 780 | Part # 206780AK | Bolt Set, CFT30 Drive Pulley Rear Cover (8 Pieces) 2005-Up (Also Fits CFT30 Driven Pulley Rear Cover (8 Pieces)… | — |
| 782 | Part # 206782AK | Bolt Set, CFT30 Valve Body To Case (17 Pieces) 2005-Up | — |
| 784 | Part # 206784AK | Bolt Set, CFT30 Pinion Cover To Bell Housing (4 Pieces) 2005-up | — |
| 786 | Part # 206786AK | Bolt Set, CFT30 Differential Ring Gear (12 Pieces) 2005-Up | — |
| 787 not on diagram | Part # 206787AK | Bolt Set, CFT30 Front Bonded Seal Plate (3 Pieces) 2005-Up | — |
| 790 | Part # 206790AK | Bolt Set, CFT30 Driven Pulley Bearing Retainer (6 Pieces) 2005-Up | — |
| 791 | Part # 206791AK | Bolt Set, CFT30 Auxillary Valve Body To Case (2 Pieces) 2005-Up | — |
| 792 not on diagram | Part # 206792AK | Bolt Set, CFT30 Transmission Range Sensor (2 Pieces) 2005-Up | — |
| 793 | Part # 206793AK | Bolt Set, CFT30 Cartridge Filter Cover (3 Pieces) 2005-Up | — |
| 798 not on diagram | Part # 206798AK | Bolt Set, CFT30 Drive Pulley Bearing Retainer (4 Pieces) 2005-Up | — |
| 799 not on diagram | Part # 206799AK | Bolt Set, CFT30 Detent Spring (2 Pieces) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 529 | Part # 206529A | Converter Reactor, CFT30 (4.390” Long) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 420 not on diagram | Part # 206420A | Solenoid Assembly, CFT30 (5 Solenoids) (16 Pin Connector) (11 Brass Rivits) (Cast # 0501 213 789) 2005-Up | 1 |
| 540 | Part # 206540AK | By-Pass Valve Assembly, CFT30 In The Cartridge Filter Cover 2005-Up | — |
| 740 | Part # 206740A | Valve Body, CFT30 With 5 Solenoids (Cast # 1072-427-048 Or 1072-427-059) 2005-Up | 2 |
| 741 | Part # 206741M-1 | Valve, CFT30 Manual (Aluminum) (4.840” Long) 2005-Up | — |
| 744 | Part # 206744A | Auxillary Valve Body, CFT30 (2 Bolts To Case) (Cast # 1072 427 043) 2005-Up | 1 |
| 991 | Part # 206991-4A | Rooster Comb, CFT30 (3.385”Long Shaft) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 206410A | Sensor, CFT30 Transmission Range (Reads Off The Manual Valve) (2 Bolt) (6 Pin Connector) (Cast # 0501213485) 2005-Up | 1 |
| 436 | Part # 206436A | Sensor, CFT30 Output Speed (12 7/8”Long Wire Harness W/4 Pin Connector) 2005-Up | — |
| 444 | Part # 206444A | Case Connector, CFT30 (1 Bolt) (2.033”Long)(Plastic) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 206010A | Filter, CFT30 (ZF, CVT) Main 2005-Up | — |
| 013 | Part # 206013A | Filter, CFT30 (ZF, CVT) Cartridge 2005-Up | — |
| 765 | Part # 206765A | Pan, CFT30 Bottom (22 Bolts) (4” Deep To 7/8” Deep) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 206070A | Seal, CFT30 Front Pump (2.955”OD)(2.390”ID) 2005-Up | — |
| 076 | Part # 206076A | Seal, CFT30 Axle (Bell Housing Side) 2WD (.785”Thick)(2.380”OD)(1.550”ID) 2005-Up | — |
| 076 | Part # 206076AB | Seal, CFT30 Axle (Bell Housing Side) AWD (3.000”OD) 2005-Up | — |
| 181 not on diagram | Part # 206181AT | Sealing Ring, CFT30 Input Shaft To Convertor Reactor (.075”Wide)(.985”OD)(Teflon) 2005-Up | — |
| 184 not on diagram | Part # 206184A | Sealing Ring, CFT30 Drive Pulley (Rear) (.097”Thick)(1.270”OD) (Lock-Joint)(Metal) 2005-Up | — |
| 185 not on diagram | Part # 206185AT | Sealing, Ring, CFT30 Driven Pulley Oil Tube (Front)(.075”Thick)(.555”OD)(Teflon) 2005-Up | — |
| 187 not on diagram | Part # 206187AT | Sealing Ring, CFT30 Drive Pulley Shaft To Rear Cover (.070”Thick)(.925”OD)(1 Tab)(Teflon) 2005-Up | — |
| 300 not on diagram | Part # 206300A | Pan Gasket, CFT30 Bottom Pan (22 Bolt) 2005-Up | — |
| 304 | Part # 206304A | Gasket, CFT30 Driven Pulley Rear Cover To Case (8 Bolt) 2005-Up | — |
| 305 | Part # 206305A | Gasket, CFT30 Driven Pulley Rear Cover To Case (8 Bolt Holes) 2005-Up | — |
| 310 | Part # 206310A | Gasket, CFT30 Pump Outer Housing To Pump Body (Metal) (8 Bolt Holes) (6 1/2”OD)(5 1/8”ID) 2005-Up | — |
| 311 | Part # 206311A | O-Ring, CFT30 Pump Body To Outer Pump Housing (Takes 2) 2005-Up | — |
| 312 | Part # 206312A | Gasket, CFT30 Pump Body To Bell Housing (Metal) (8 Bolt Holes)(6 5/8”OD)(3.555”ID) 2005-Up | — |
| 318 | Part # 206318A | Gasket, CFT30 Bell Housing To Case (26 Bolt Holes) 2005-Up | — |
| 338 not on diagram | Part # 206338A | O-Ring, CFT30 Reverse Clutch Piston (Inner) (3.580”ID) 2005-Up | — |
| 339 not on diagram | Part # 206339A | O-Ring, CFT30 Reverse Clutch Piston (Outer) (5.880”OD) 2005-Up | — |
| 347 not on diagram | Part # 206347-1A | O-Ring, CFT30 Case Connector (Small) (.079”Thick)(1.430”OD) (Ribbed) 2005-Up | — |
| 347 not on diagram | Part # 206347A | O-Ring, CFT30 Case Connector (Large) (.079”Thick)(1.575”OD) (Ribbed) 2005-Up | — |
| 375 | Part # 206375A | O-Ring, CFT30 Pinion Cover To Case (.098”Thick)(4.820”OD) 2005-Up | — |
| 378 | Part # 206378A | O-Ring, CFT30 By-Pass Valve Plug (.076”Thick)(.880”OD) 2005-Up | — |
| 379 | Part # 206379A | O-Ring, CFT30 Cartridge Filter Cover (.102”Thick)(2.300”OD) 2005-Up | — |
| 382 | Part # 206382-1A | O-Ring, CFT30 Case Tube # 999-3 (Drive Pulley Cover End)(.061”Thick)(.575”OD) 2005-Up | — |
| 382 | Part # 206382-2A | O-Ring, CFT30 Case Tube # 999-3 (Case End)(.059”Thick)(.592”OD) 2005-Up | — |
| 382 | Part # 206382-4A | O-Ring, CFT30 Case/Auxillary Valve Body Tube # 999-4 (Case End)(.056”Thick)(.350”OD) 2005-Up | — |
| 382 | Part # 206382-5A | O-Ring, CFT30 Valve Body Tube Sleeve (.077”Thick)(.525”OD) (Takes 2) 2005-Up (Also Fits CFT30 Valve Body Tube # 999-6… | — |
| 382 | Part # 206382-7A | O-Ring, CFT30 Valve Body To Sleeve To Case (.078”Thick)(.720”OD) 2005-Up | — |
| 382 | Part # 206382-8A | O-Ring, CFT30 Valve Body To Sleeve To Bell (.077”Thick)(.708”OD) 2005-Up… | — |
| 382 | Part # 206382-12A | O-Ring, CFT30 Driven Pulley Cover To Sleeve To Case (.062”Thick)(.598”OD) 2005-Up | — |
| 382 | Part # 206382-13A | O-Ring, CFT30 Driven Pulley Tube (Rear)(.082”Thick)(.555”OD) 2005-Up | — |
| 382 | Part # 206382A | O-Ring, CFT30 Auxillary Valve Body Tube # 999-1 (Both Ends)(.058”Thick)(.475”OD) 2005-Up… | — |
| 387 | Part # 206387A | O-Ring, CFT30 Drain Plug (.066”Thick)(1.002”OD) 2005-Up | — |
| 519 | Part # 206519A | Plate, CFT30 Front Seal Pump (Bonded)(9 5/8”OD)(6 15/16”ID) (Cast # 5F97-7B325AA) 2005-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 032 | Part # 206032A | Bushing, CFT30 Convertor Reactor (Inner, Front)(.985”OD)(.888”ID) 2005-Up | — |
| 210 | Part # 206210A | Washer, CFT30 Pump Body To Rotor (.074”Thick)(3.655”OD)(2.385”ID)(9 Round Holes) 2005-Up | — |
| 228 | Part # 206228A | Caged Needle Bearing, CFT30 Driven Pulley Shaft To Bell Housing (1.055”Thick)(1.470”OD) (14 Roller With Plastic Cage)… | — |
| 229 | Part # 206229A | Ball Bearing, CFT30 Driven Pulley Shaft To Case (.905”Thick)(3.545”OD)(1.575”ID) (Cast # NSK 40TM16A) 2005-Up | 1 |
| 230 | Part # 206230A | Bearing, CFT30 Reverse Planet (Rear) To Drive Pulley (.079”Thick)(1.170”OD)(.675”ID) 2005-Up | — |
| 231 | Part # 206231A | Race, CFT30 Reverse Planet (Rear) To Drive Pulley (.086”Thick)(1.165”OD)(.735”ID) 2005-Up | — |
| 232 | Part # 206232A | Caged Needle Bearing, CFT30 Reverse Planet To Drive Pulley (.420”Thick)(1.170”OD) 2005-Up | — |
| 235 | Part # 206235A | Ball Bearing, CFT30 Drive Pulley Shaft To Case (.707”Thick)(3.345”OD)(1.435”ID) (Cast # NSK B35-181) 2005-Up | 1 |
| 247 not on diagram | Part # 206247A | Shim, CFT30 Snap Ring # 887 To Reverse Sun Gear (.079”Thick)(1.455”OD)(1.180”ID) 2005-Up | — |
| 254 | Part # 206254A | Caged Roller Bearing, CFT30 Converter Reactor To Reverse Planet (15 Rollers)(With Plastic Cage)(1.560”ID) 2005-Up | — |
| 255 | Part # 206255A | Washer, CFT30 Reverse Clutch Hub To Reverse Planet (3 Inner Tabs)(3.123”OD)(2.115”ID) 2005-Up | — |
| 274 | Part # 206274A | Caged Needle Bearing, CFT30 Pinion Shaft To Bell Housing (.972”Thick)(1.785”OD)(With 10 Legs On Plastic Cage) 2005-Up | — |
| 281 | Part # 206281A | Ball Bearing, CFT30 Pinion Shaft To Pinion Cover (.905”Thick)(3.545”OD)(1.575”ID) (Cast # SKF 6308 TN9/C3h) 2005-Up | 1 |
| 288 | Part # 206288A | Cup Race, CFT30 Differential To Case (3.150”OD)(Cast # SKF 32010X/Q) 2005-Up | 1 |
| 289 | Part # 206289A | Cone Bearing, CFT30 Differential To Case (25 Rollers)(1.865”ID) (Cast # SKF 32010X/Q 17 138B) 2005-Up | 1 |
| 291 | Part # 206291A | Cup Race, CFT30 Differential To Bell Housing (.688”Thick)(3.740”OD)(3.190”ID) (Cast # SKF 32012X7QCL7C) 2005-Up | 1 |
| 292 | Part # 206292A | Cone Bearing, CFT30 Differential To Bell Housing (26 Rollers)(2.360”ID) (Cast # SKF 32012X7QCL7C) 2005-Up | 1 |
| 293 | Part # 206293AA | Shim, CFT30 Differential Bearing Cup Race To Bell Housing (Selective)(3.685”OD)(3.355”ID) 2005-Up | — |
| 298 not on diagram | Part # 206298A | Spacer, CFT30 Goes On Belt Guide Adjusting Rod (.059”Thick)(Triangle Shaped) 2005-Up | — |
| 436 | Part # 206436-1A | Spacer, CFT30 Output Speed Sensor Bolt (.227”Thick)(.630”OD)(.260”ID) 2005-Up | — |
| 789 | Part # 206789-1A | Washer, CFT30 Bolt To Tube # 999-6 To Bell (Aluminum) (.046” Thick)(.583”OD)(.405”ID) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 206500A | Pump Assembly, CFT30 (8 Piston & Spring Type)(Cast # 8645501200C On Pump Body # 510) 2005-Up | 3 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 108 | Part # 206108A | Friction, CFT30 Forward Cluych (.076”(30 Teeth)(5.780”OD)(Hi-Energy) 2005-Up | — |
| 110 | Part # 206110A | Friction, CFT30 Reverse Clutch (.062”)(30 Teeth)(6.555”OD)(Hi-Energy) 2005-Up | — |
| 128 | Part # 206128A | Steel, CFT30 (ZF, CVT) Forward Clutch (.071”)(24 Teeth)(4.885”ID) 2005-Up | — |
| 129 | Part # 206129A | Cushion, CFT30 Forward Clutch (.038”)(24 Teeth)(4.930”ID)(Waved) 2005-Up | — |
| 130 | Part # 206130A | Steel, CFT30 (ZF, CVT) Reverse Clutch (.069”)(30 Teeth)(5.625”ID) 2005-Up | — |
| 131 | Part # 206131A | Cushion, CFT30 Reverse Clutch (.034”)(30 Teeth)(5.640”ID)(Wavy) 2005-Up | — |
| 148 | Part # 206148A | Pressure Plate, CFT30 Forward Clutch (.138”)(24 Teeth)(4.885”ID)(Stepped) 2005-Up | — |
| 150 | Part # 206150A | Pressure Plate, CFT30 Reverse Clutch (.197”)(30 Teeth)(5.630”ID)(Stepped) 2005-Up | — |
| 964 | Part # 206964A | Piston, CFT30 Forward Clutch (Steel)(.700”Thick)(5.560”OD)(1.815”ID) 2005-Up | — |
| 966 | Part # 206966A | Piston, CFT30 Reverse Clutch (Steel) (1.865”Thick)(6 1/4”OD)(3.595”ID) 2005-Up | — |
| 974 | Part # 206974A | Spring, CFT30 Forward Clutch Return (.059”Thick)(3.895”OD)(10 Fingers) 2005-Up | — |
| 976 | Part # 206976A | Spring, CFT30 Reverse Clutch Return (.069”Thick)(5.400”OD)(12 Fingers) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 554 | Part # 206554A | Drum, CFT30 Forward Clutch (3 Clutch) (24 Teeth Steels) (6 5/16”OD) (Stamped Steel, W/Cast Iron Center) 2005-Up | — |
| 587 | Part # 206587A | Planet, CFT30 Reverse (With Input Shaft) (6 Gear)(7 5/8”Long)(30 Teeth Clutch Hub)(27 Input Splines) 2005-Up | — |
| 597 | Part # 206597A | Hub, CFT30 Reverse Clutch (30 Teeth Hub) (84 Teeth Ring Gear) 2005-Up | — |
| 617 | Part # 206617A | Sun Gear, CFT30 Reverse Planet (42 Teeth, 1 Groove) 2005-Up | — |
| 700 | Part # 206700A | Drive Chain, CFT30 Pulley (1.350”Wide) (75 Pins) 2005-Up | — |
| 705 | Part # 206705A | Drive Pulley, CFT30 (With 9 1/2” Long Shaft) 2005-Up | — |
| 706 | Part # 206706A | Driven Pulley, CFT30 (With 11 3/4” Long Shaft) 2005-Up | — |
| 710 | Part # 206710A | Gear, CFT30 Drive Transfer (34 Teeth, 2 Groove)(2.625”Long)(2.850”OD) 2005-Up | — |
| 712 | Part # 206712A | Driven Transfer Gear, CFT30 (54 Teeth, 2 Groove)(1.415”Thick)(4.380”OD)(1.960”ID) 2005-Up | — |
| 715 not on diagram | Part # 206715A | Differential, CFT30 2WD (69 Teeth, 12 Bolt) (25 & 26 Roller Bearing)(7 1/8” Tall Housing) (Cast # 4481 415 003) 2005-Up | 1 |
| 715 not on diagram | Part # 206715AB | Differential, CFT30 AWD (69 Teeth, 12 Bolt) (25 & 26 Roller Bearing)(8 3/16” Tall Housing) (Cast # 4481 415 003)… | 1 |
| 730 | Part # 206730A | Pinion Gear, CFT30 (22 Teeth, 2.895”OD)(5.712” Long Shaft) 2005-Up | — |
| 750 not on diagram | Part # 206750A | Bell Housing, CFT30 2WD (3 1/4” Top Bolts)(Square Open Starter At 2:00) (Cast # 1072,422,033 ZF On Top)… | 3 |
| 750 not on diagram | Part # 206750AB | Bell Housing, CFT30 AWD (3.000”OD Axle Seal)(Has 4 Threaded Bosses By The Axle Seal) 2005-Up | — |
| 756 | Part # 206756A | Rear Cover, CFT30 Driven Pulley (Aluminum, 8 Bolt)(Cast # 1972-401-104) 2005-Up | 1 |
| 757 | Part # 206757A | Cover, CFT30 Pinion (Aluminum, 4 Bolt)(Cast # 1072 414 027) 2005-Up | 1 |
| 759 | Part # 206759A | Rear Cover, CFT30 Drive Pulley (Aluminum, 8 Bolt)(Cast # 1672-401-095) 2005-Up | 1 |
| 769 | Part # 206769A | Cover, CFT30 Cartridge Filter (Aluminum, 3 Bolt) 2005-Up | — |
| 995 | Part # 206995A | Park Pawl Assembly, CFT30 (6 Pieces) 2005-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 383 | Part # 206383-1A | Twin Rubber Sleeves, CFT30 Valve Body To Bell (.870”Long)(.535”OD)(.310”OD) 2005-Up | — |
| 383 | Part # 206383A | Tube/Seal, CFT30 Auxillary Valve Body (Bonded)(1.085”Long)(.455”OD)(.225”ID) 2005-Up | — |
| 385 | Part # 206385A | Tube/Seal, CFT30 Filter Cover To Case (Bonded)(.720”Long)(.600”OD)(.395”ID) 2005-Up | — |
| 386 | Part # 206386A | Seal Cap, CFT30 Pinion Cover (Bonded)(.505”Thick)(2.371”OD) 2005-Up | — |
| 492 not on diagram | Part # 206492A | Plug, CFT30 Drain (6mm Allen Head) 2005-Up | — |
| 693 | Part # 206693A | Bracket, CFT30 Holds The 2 Case Tubes In (2 Bolt) 2005-Up | — |
| 694 | Part # 206694A | Retainer, CFT30 Holds Bearing # 235 To Case (4 Bolt) 2005-Up | — |
| 696 | Part # 206696A | Retainer, CFT30 Driven Pulley Bearing To Case (6 Bolt) 2005-Up | — |
| 698 | Part # 206698A | Oil Deflector, CFT30 Differential (3 Bolt, Tin) 2005-Up | — |
| 701 | Part # 206701-1A | Adjusting Rod, CFT30 Belt (3.625”Long)(Goes Into Case) 2005-Up | — |
| 789 | Part # 206789A | Bolt, CFT30 Tube # 999-6 To Bell (Hollow)(.985”Long) 2005-Up | — |
| 794 | Part # 206794AK | Replaced by U206780AK | — |
| 795 | Part # 206795A | Nut, CFT30 Drive Pulley Shaft (12 Point)(50mm Head) 2005-Up | — |
| 797 | Part # 206797A | Nut, CFT30 Driven Pulley Shaft (50mm Head) 2005-Up | — |
| 872 | Part # 206872A | Snap Ring, CFT30 Holds By-Pass Valve In (.050”Thick)(1.092”OD) 2005-Up | — |
| 876 | Part # 206876A | Snap Ring, CFT30 Holds Forward Clutch Pressure Plate In (.053”Thick) (6 5/16”OD) 2005-Up | — |
| 877 | Part # 206877A | Snap Ring, CFT30 Holds Forward Drum & Retainer To The Drive Pulley Shaft (.058”Thick) (1.548”OD) 2005-Up | — |
| 881 not on diagram | Part # 206881A | Snap Ring, CFT30 Holds Tube # 999-3 To Case (.045”Thick)(.766”OD) 2005-Up | — |
| 882 | Part # 206882A | Snap Ring, CFT30 Holds Tube # 999-13 To Rear Cover (.045”Thick)(.655”OD) 2005-Up | — |
| 886 | Part # 206886A | Snap Ring, CFT30 Holds Brg # 281 To Pinion Cover (.116”Thick)(3.775”OD)(W/2 Eyelets) 2005-Up | — |
| 887 | Part # 206887A | Snap Ring, CFT30 Holds Reverse Sun Gear To Drive Pulley (.060”Thick)(1.100”ID)(2 Eyelets, With 4 Outer Tabs) 2005-Up | — |
| 890 | Part # 206890A | Snap Ring, CFT30 Holds Rotor Assembly In Pump Body (.055”Thick)(3.920”OD) 2005-Up | — |
| 892 | Part # 206892A | Snap Ring, CFT30 Holds Reverse Clutch Pressure Plate In (.053”Thick)(7 1/8”OD) 2005-Up | — |
| 896 not on diagram | Part # 206896A | Snap Ring, CFT30 Holds Spacer # 298 On Adjusting Rod (.038”Thick)(.407”OD) 2005-Up | — |
| 897 | Part # 206897A | Snap Ring, CFT30 Holds Bearing # 281 To Pinion Shaft # 730 2005-Up | — |
| 898 | Part # 206898A | Snap Ring, CFT30 Holds Drive Transfer Gear To Driven Pulley Shaft (.093”Thick)(1.460”OD) (W/2 Eyelets) 2005-Up | — |
| 899 | Part # 206899A | Snap Ring, CFT30 Holds Driven Transfer Gear To Pinion Shaft (.097”Thick)(2.093”OD) (W/2 Eyelets) 2005-Up | — |
| 984 | Part # 206984A | Retainer, CFT30 Forward Clutch Return Spring (.715”Thick)(4.315”OD)(1.485”ID) 2005-Up | — |
| 986 | Part # 206986A | C Clips, CFT30 Holds Reverse Clutch Piston Return Spring In (.160”Thick)(2 Pieces) 2005-Up | — |
| 991 | Part # 206991-2A | Spring, CFT30 Rooster Comb Detent (3.555”Long)(2 Bolt) 2005-Up | — |
| 991 | Part # 206991-5A | Roll Pin, CFT30 Holds Shift Lever To Manual Shaft (.880”Long)(.203”OD) 2005-Up | — |
| 992 | Part # 206992A | Shift Lever, CFT30 External (3.100”Long)(With Ball) 2005-Up | — |
| 994 not on diagram | Part # 206994A | Park Rod Actuator, CFT30 (7” Long) 2005-Up | — |
| 999 | Part # 206999-1A | Tube, CFT30 Auxillary Valve Body To Case (2.260”Long At T End) 2005-Up | — |
| 999 | Part # 206999-2A | Tube, CFT30 Case To Belt Oiler (With T Connector On Case End) 2005-Up | — |
| 999 | Part # 206999-3A | Tube, CFT30 Case To Drive Pulley Rear Cover (With T Connector On Case End) 2005-Up | — |
| 999 | Part # 206999-4A | Tube, CFT30 Valve Body To Case & To Auxillary Valve Body (With 2 O-Rings On The T) 2005-Up | — |
| 999 | Part # 206999-5A | Tube Sleeve, CFT30 Valve Body To Tube # 999-4 (1.770”Long)(Uses 2 O-Rings) 2005-Up | — |
| 999 | Part # 206999-6A | Tube, CFT30 Valve Body To Bell (With T On Valve Body End & A Banjo Fitting On The Other End) 2005-Up | — |
| 999 | Part # 206999-7A | Oil Sleeve, CFT30 Valve Body To Case (.663”Long)(.705”OD)(.515”ID) (Uses 2 O-Rings) 2005-Up | — |
| 999 | Part # 206999-8A | Oil Sleeve, CFT30 Pump Housing To Bell (.625”Long)(.675”OD)(.515”ID)(Uses 2 O-Rings) 2005-Up | — |
| 999 | Part # 206999-9A | Oil Sleeve, CFT30 Valve Body To Case (.580”Long)(.705”OD)(.515”ID) (Uses 2 O-Rings) 2005-Up | — |
| 999 | Part # 206999-12A | Oil Sleeve, CFT30 Driven Pulley Cover To Case (.700”Long)(.570”OD)(.398”ID) (Uses 2 O-Rings) 2005-Up | — |
| 999 | Part # 206999-13A | Tube, CFT30 Driven Pulley To Rear Cover (5.325”Long)(Uses 2 Sealing Rings & 1 O-Ring) 2005-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.