C6 parts diagram
Positions:
232 total, 116 on the diagram
Parts:
831 total, 347 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 36000 | Paper & Rubber Kit, C-6 1966-E76 | — |
| 000 not on diagram | Part # 36000C | Paper & Rubber Kit, Combo 1968-Up | — |
| 000 not on diagram | Part # 36000E | Paper & Rubber Kit, E4OD 1989-95 | — |
| 002 not on diagram | Part # 36002 | Overhaul Kit, C-6 1966-E76 | — |
| 002 not on diagram | Part # 36002C | Overhaul Kit, C-6 Combo 1968-96 | — |
| 002 not on diagram | Part # 36002E | Overhaul Kit, E4OD 1990-95 (TTK) (For 1989 Only Sell 32320E & 32321E Also or Sell T36002E or T36002EF) | — |
| 002 not on diagram | Part # 36002EB | Overhaul Kit, E4OD/4R100 (Cork) 1996-Up (W/2.506”OD Rear Seal) For 4R100 W/PTO You Must Sell 36301 Also… | — |
| 002 not on diagram | Part # 36002EBW | Overhaul Kit, E4OD/4R100 (Bonded Pan Gasket) 1996-Up (W/2.506”OD Rear Seal) (.015” Valve Body Gasket) 4R100 W/PTO You… | — |
| 004 not on diagram | Part # 36004 | Master L/Steels Kit, C-6 1966-E67 | — |
| 004 not on diagram | Part # 36004A | Master L/Steels Kit, C-6 L1967-E76 | — |
| 004 not on diagram | Part # 36004B | Master L/Steels Kit, C-6 L1976-Up | — |
| 004 not on diagram | Part # 36004BS1 | Master L/Steels Kit, C-6 (Stage 1) L1976-Up | — |
| 004 not on diagram | Part # 36004E | Master L/Steels Kit, E4OD 1989-95 | — |
| 004 not on diagram | Part # 36004EB | Master L/Steels Kit, E4OD (W/72 Teeth Reverse Frictions) 1996-3/97 | — |
| 004 not on diagram | Part # 36004EBW | Master L/Steels Kit, E4OD (With 72 Teeth Reverse Frictions)(With Bonded Pan Gasket) 1996-E97 | — |
| 004 not on diagram | Part # 36004ED | Master L/Steels Kit, E4OD/4R100 (W/24 Teeth Reverse & 64 Teeth Overdrive Frictions) L97-L98 (W/2.506”OD Rear Seal)… | — |
| 004 not on diagram | Part # 36004EG | Master L/Steels Kit, 4R100 (24 Teeth Reverse & 32 Teeth Overdrive Frictions) 1998-Up (2.506”OD Rear Seal)… | — |
| 006 not on diagram | Part # 36006 | Master W/Steels Kit, C-6 1966-E67 | — |
| 006 not on diagram | Part # 36006A | Master W/Steels Kit, C-6 L1967-E76 | — |
| 006 not on diagram | Part # 36006B | Master W/Steels Kit, C-6 L1976-Up | — |
| 006 not on diagram | Part # 36006E | Master W/Steels Kit, E4OD 1989-95 | — |
| 006 not on diagram | Part # 36006EB | Master W/Steels Kit, E4OD (W/72 Teeth Reverse Frictions) 1996-3/97 | — |
| 006 not on diagram | Part # 36006ED | Master W/Steels Kit, E4OD/4R100 (W/24 Teeth Reverse Frictions) 4/97-UP (W/2.506”OD Rear Seal)… | — |
| 006 not on diagram | Part # 36006EG | Master W/Steels Kit, 4R100 (24 Teeth Reverse & 32 Teeth Overdrive Frictions) .125” Intermediate Steels 1998-Up… | — |
| 011 not on diagram | Part # 36011A | Filter Kit, C-6 2WD 1966-74 | — |
| 011 not on diagram | Part # 36011B | Filter Kit, C-6 2WD 1975-Up | — |
| 011 not on diagram | Part # 36011C | Filter Kit, C-6 4x4 1973-Up | — |
| 011 not on diagram | Part # 36011E | Filter Kit, E4OD/4R100 2WD 1989-Up | — |
| 011 not on diagram | Part # 36011EA | Filter Kit, E4OD/4R100 4x4 1989-Up | — |
| 030 not on diagram | Part # 36030 | Bushing Kit, C-6 1966-Up | — |
| 030 not on diagram | Part # 36030E | Bushing Kit, E4OD/4R100 1989-97 (Contains 14 Bushings) | — |
| 104 not on diagram | Part # 36104EPPK | Friction/Steel Kit, E4OD/4R100 Intermediate Clutch (Hi-Performance) Power Pack… | — |
| 104 not on diagram | Part # 36104EZPK | Friction/Steel Kit, E4OD/4R100 Intermediate Clutch “Z Pak” 1989-Up | — |
| 106 | Part # 36106CPK | Friction & Steel Kit, C-6/E4OD Direct (.063”) (Smooth)(Tan)(Power Pack) Includes; 8-36106(.063”); 9-36126(.059”)… | — |
| 106 | Part # 36106CPPK | Friction & Steel Kit, C-6/E4OD Direct (.063”) (Red Hi-Performance)(Power Pack) Includes: 8-36106(.063”), 8-36126… | — |
| 106 | Part # 36106HPK | Friction Kit, C-6/E4OD Direct Clutch (.077”) (Hi-Performance) 5 Per Kit | — |
| 108 | Part # 36108BHPK | Friction Kit, C-6/E4OD Forward Clutch (.075”) (Hi-Performance) L1976-Up (4 Per Kit) | — |
| 108 | Part # 36108DPPK | Friction & Steel Kit, C-6/E4OD Forward Clutch (.063”) (Red Hi-Performance)(Power Pack) Includes; 6-36108(.063), 6-36126… | — |
| 110 | Part # 36110HPK | Friction Kit, C-6/E4OD Reverse Clutch (.075”) (72 Teeth) (Hi-Performance) 66-E97(5 Per Kit) | — |
| 130 | Part # 36130XK | Steel Kit, E4OD Reverse & Forward/Direct (Oversize) 1989-Up Contains; 4-36130X, 3-36126X, & 1-36870 | — |
| 164 | Part # 36164K | Pin Kit, C-6 Modulator (4 Pieces) | 1 |
| 165 not on diagram | Part # T36165 | Shift Kit, C-6 Diesel & Gas 1967-Up (Transgo) | — |
| 165 not on diagram | Part # T36165E | Shift Kit, E4OD/4R100 1989-Up (Transgo) | 1 |
| 169 not on diagram | Part # T36169 | Reprogramming Kit, C-6 (Gas Only) 1967-Up Heavy Duty Towing & Competition (Transgo) | — |
| 169 not on diagram | Part # T36169E | Reprogramming Kit, E4OD Heavy Duty & Hi-Performance (Gas & Diesel) 1989-Up (Transgo) | 1 |
| 169 not on diagram | Part # T36169EA | Reprogramming Kit, E4OD/4R100 Heavy Duty & Hi-Performance… | 1 |
| 171 not on diagram | Part # A36171 | Transaction Kit, C-6 1967-Up (Fairbanks) | 1 |
| 173 not on diagram | Part # T36173 | Reprogramming Kit, C-6 (Gas Only) 1967-Up Full Manual Control, Competition Stick Shift (Transgo) | — |
| 175 not on diagram | Part # 36175 | Ring Kit, C-6 (Metal) 1966-Up | — |
| 175 not on diagram | Part # 36175E | Ring Kit, E4OD/4R100 1989-Up | — |
| 175 not on diagram | Part # 36175T | Ring Kit, C-6 (Teflon) 1966-Up | — |
| 200 not on diagram | Part # 36200 | Washer Kit, C-6 W/Out Selective 8 Metal 1969-Up | — |
| 200 not on diagram | Part # 36200A | Washer Kit, C-6 W/Out Selective 10 Metal 1966-Up | — |
| 200 not on diagram | Part # 36200AA | Washer Kit, C-6 W/Plastic Selectives | — |
| 200 not on diagram | Part # 36200E | Washer Kit, E4OD/4R100 (W/3 Pinion Planets)(13 Pieces) 1989-Up | — |
| 200 not on diagram | Part # 36200EA | Washer Kit, E4OD (W/4 Pinion Planets) (12 Pieces) 1989-Up | — |
| 200 not on diagram | Part # 36200EB | Washer Kit, 4R100 (10 Pieces) 1998-Up | — |
| 201 not on diagram | Part # 36201A | Bearing Kit, C-6 (3 Bearings) Torrington | — |
| 201 not on diagram | Part # 36201E | Bearing Kit, E4OD Torrington | — |
| 236 not on diagram | Part # S36236AK | Shim Kit, C-6 (Goes Under #235)(.010”)(10 Per Kit) Sonnax (6 Slots) | 1 |
| 236 not on diagram | Part # S36236BK | Shim Kit, C-6 (Goes Under #235)(.010”)(10 Per Kit) Sonnax (4 Slots) | 1 |
| 236 not on diagram | Part # S36236EK | Shim Kit, E4OD/4R100 (Goes Under #235)(.010”) Sonnax (10 Per Kit) | 1 |
| 307 | Part # S36307AK | Seal Kit, C-6 (R-Code Servo Cover)(Gasket & 5 O-Rings) For S36907DK (Sonnax) | — |
| 316 not on diagram | Part # 36316E | Gasket Kit, E4OD Center Support Plate (5 Per Kit) (Sonnax) | 1 |
| 390 not on diagram | Part # 36390 | External Seal Kit, C-6 (W/Pan Gasket) 1966-Up | — |
| 390 not on diagram | Part # 36390E | External Seal Kit, E4OD/4R100 (W/Pan Gasket) 1989-Up | — |
| 445 not on diagram | Part # 86445ECK | Repair Kit, AXOD/AXODE/AX4N Speed Sensor Wire Harness Connector… | — |
| 507 not on diagram | Part # 36507-3K | Shudder Spring Kit, E4OD (In Plug) | 1 |
| 507 not on diagram | Part # 36507AK | Poppet Valve Set, C-6 Drain Back (In Stator) (Valves & Orifice Plugs) (5 Per Pack) | — |
| 530 | Part # 36530 | Gear Set, AOD Pump 1980-93 | 1 |
| 555 | Part # 36555CBK | Drum Kit, 4R100 Direct With Sprag (4 Clutch) With 1 Feed Hole 1998-Up (Can Use This Kit To Replace Diode Type Drum)… | — |
| 555 | Part # 36555CK | Drum Kit, 4R100 Direct Clutch (4 Clutch) W/36965E & 229 Washer (Use This Kit To Replace Diode Type Drum) If Customer… | — |
| 555 | Part # 36555DBK | Drum Kit, 4R100 Direct With Sprag (5 Clutch) With 1 Feed Hole 1998-Up (Can Use This Kit To Replace Diode Type Drum)… | — |
| 555 | Part # 36555DK | Drum Kit, 4R100 Direct Clutch (5 Clutch) W/36965E & 229 Washer (Use This Kit To Replace Diode Type Drum) If Customer… | — |
| 560 not on diagram | Part # 36560 | Piston Kit, E4OD Overdrive Clutch (Aluminum Piston) | — |
| 560 not on diagram | Part # 36560A | Piston Kit, E4OD/4R100 Overdrive Clutch (Bonded Piston) | — |
| 562 not on diagram | Part # 36562 | Piston Kit, E4OD/4R100 Intermediate Clutch (Aluminum Piston) | — |
| 564 not on diagram | Part # 36564 | Piston Kit, C-6 Forward Clutch 1966-76 | — |
| 564 not on diagram | Part # 36564A | Piston Kit, C-6/E4OD/4R100 Forward Clutch L1976-Up | — |
| 565 not on diagram | Part # 36565 | Piston Kit, E4OD/4R100 Direct Clutch (Cast # E9TP-7A262-CA) (Used With Washer Type Direct Drum) 1989-98 | 1 |
| 565 not on diagram | Part # 36565A | Piston Kit, C-6 Direct Clutch | — |
| 565 not on diagram | Part # 36565B | Piston Kit, E4OD/4R100 Direct Clutch (CAst # YC3P-7A262-AA) (Used With Bearing Type Direct Drum) 1998-Up | 1 |
| 566 not on diagram | Part # 36566 | Piston Kit, C-6 Reverse Clutch 1966-E76 | — |
| 566 not on diagram | Part # 36566A | Piston Kit, C-6 Reverse Clutch L1976-E86 | — |
| 566 not on diagram | Part # 36566AA | Piston Kit, C-6 Reverse Clutch L1986-Up (3.187”ID/4.925”OD Spring Retainer) | — |
| 566 not on diagram | Part # 36566B | Piston Kit, C-6 Reverse Clutch L1986-Up (3.00”ID / 4.925”OD Spring Retainer) | — |
| 566 not on diagram | Part # 36566BA | Piston Kit, E4OD Reverse Clutch 1989-Up (3.187”ID / 4.925”OD Spring Retainer) | — |
| 566 not on diagram | Part # 36566C | Piston Kit, E4OD Reverse Clutch 1989-Up (3.00”ID / 4.925”OD Spring Retainer) | — |
| 566 not on diagram | Part # 36566CA | Piston Kit, 4R100 Reverse Clutch 1998-Up (3.00”ID / 5.190”OD Spring Retainer) | — |
| 569 not on diagram | Part # 36569 | Piston Kit, E4OD/4R100 Coast Clutch (For Cast Iron Drum) 1989-98 | — |
| 569 not on diagram | Part # 36569A | Piston Kit, 4R100 Coast Clutch (For Stamped Steel Drum) 1998-Up | — |
| 580 not on diagram | Part # 36580BBK | Planet Kit, E4OD Overdrive (4 Gear) Steel (W/Input Shaft) 1994-98 | 1 |
| 602 | Part # 36602AK | Hub Kit, C-6 Forward Planet Ring Gear And Hub L1976-Up | — |
| 636 not on diagram | Part # 36636BAK | Support Kit, E4OD/4R100 Direct Drum (Contains: 36636B,36675BA,36484E,36630,26223, 36224,36580AA,36670C) 1995-Up… | — |
| 636 not on diagram | Part # 36636BK | Support Kit, E4OD Direct Drum (Contains: 36636B,36375B,36484E,36630,36223,36224) 1994...… | 1 |
| 664 | Part # 36664EAK | Inner Race Kit, C-6/E4OD Rear Sprag (1.013” Thick)(3.198”OD)1989-97 (W/Heavy Duty Bearing) | — |
| 664 | Part # 36664EK | Inner Race Kit, C-6/E4OD Rear Sprag (1.013” Thick)(3.198”OD)1989-97 (W/OE Type Bearing) | — |
| 741 not on diagram | Part # A36741SAK | Valve Kit, E4OD/4R100 2-3 Shift Valve & Spring (For F6 Casting)(Transgo) (Fixes 3 Transmissions)… | — |
| 741 not on diagram | Part # S36741ECK | Sure Cure Kit, E4OD (Sonnax) | — |
| 741 not on diagram | Part # S36741EDK | Sure Cure Kit, 4R100 (Sonnax) | — |
| 741 not on diagram | Part # S36741P-3K | Spring Kit, C-6 (2WD Gas) Main Pressure Regulator (Elevated Pressure) (20 Springs Per Kit) (Sonnax) | — |
| 741 not on diagram | Part # S36741PE-3 | Spring Kit, E4OD/4R100 Main Pressure Regulator (Elevated Pressure) (20 Springs Per Kit) (Sonnax) | — |
| 761 not on diagram | Part # S36761C-2K | Seal Kit, E4OD/4R100 Intermediate & Direct Clutch Feed (Sonnax)(Contains: 2 Rubber Seals, 2 Seal Tubes & 2 Springs) | — |
| 777 | Part # 36777AK | Bolt Set, E4OD/4R100 Pump To Case (9 Bolts) | — |
| 777 | Part # 36777K | Bolt Set, C-6 Pump To Case | — |
| 778 not on diagram | Part # 36778AK | Bolt Set, E4OD Pump Body To Stator (11 Pieces) | — |
| 778 not on diagram | Part # 36778BK | Bolt Set, 4R100 Pump Body To Stator (12 Pieces) | — |
| 778 not on diagram | Part # 36778K | Bolt Set, C-6 Pump Body To Stator (5 Pieces) | — |
| 779 not on diagram | Part # 36779AK | Bolt Set, 5R110W Pan To Case (20 Pieces) | — |
| 779 not on diagram | Part # 36779K | Bolt Set, C-6 Pan To Case | — |
| 781 | Part # 36781AAK | Bolt Set, E4OD Extension Housing To Case (4x4) | — |
| 781 | Part # 36781AK | Bolt Set, E4OD Extension Housing To Case (2WD) | — |
| 781 | Part # 36781K | Bolt Set, C-6 Extension Housing To Case | — |
| 783 not on diagram | Part # 36783-SK | Shim Kit, E4OD/4R100 Center Support Bolt To Case (Aluminum)(10 Pieces)(Sonnax) | — |
| 783 not on diagram | Part # 36783B | Bolt Set, E4OD Holds Aluminum Center Support To Steel Direct Drum Support (3 Per Set) | — |
| 783 not on diagram | Part # S36783-SK | Shim KIt, E4OD/4R100 Center Support Bolt To Case (Aluminum)(10 Pieces)(Sonnax) | — |
| 790 | Part # 36790AK | Bolt Set, E4OD Rear Support To Case | — |
| 790 | Part # 36790K | Bolt Set, C-6 Rear Support To Case | — |
| 926 not on diagram | Part # 36926K | Spring Kit, C-6 Accumulator (Inner & Outer) | — |
| 926 not on diagram | Part # A36926CK | Spring Kit, E4OD/4R100 Accumulator (Outer)(3 Per Pack) (Superior) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 160 | Part # 26160 | Modulator, C-4 White Stripes (Screw In) 1964-72 | 1 |
| 160 | Part # 36160A | Modulator, C-6 Pink Stripe Dual Line (Push-In) (Adjustable)1973-Up | — |
| 160 | Part # 36160B | Modulator, C-6 Black Stripe (Single Line) (Push-In) 1973-Up | 1 |
| 160 | Part # 36160G | Modulator, C-6 Green Stripe (Single Line)(Push-In)1977-Up | 1 |
| 160 | Part # 36160P | Modulator, C-6 Purple Stripe (Single Line)(Push-In) 1975-Up | 1 |
| 163 | Part # 36163 | Valve, C-6 Under Modulator Pin | 1 |
| 163 | Part # S36163X | Valve, C-6 Oversized Modulator System (Sonnax) | 1 |
| 165 not on diagram | Part # A36165E | Valve Body Kit, E4OD/4R100 1989-04 (Ratiotek)(Trancel) | — |
| 165 not on diagram | Part # S36165 | Valve Body Kit, C-6 (Superior) | — |
| 165 not on diagram | Part # S36165E | Valve Body Kit, E4OD/4R100 1989-Up (Superior) | 1 |
| 165 not on diagram | Part # S36165ES | Valve Body Kit, E4OD/E4OD (W/Steel Boost Valve & Sleeve) 1989-Up (Superior) | 1 |
| 165 not on diagram | Part # S36165S | Valve Body Kit, C-6 (W/Steel Boost Valve & Sleeve) All Models (Superior) | 1 |
| 169 not on diagram | Part # A36169 | 2 Stage Pack, C-6 1967-Up (Superior) | 1 |
| 169 not on diagram | Part # A36169EPT | Valve Body Kit, E4OD/4R100 Powertow 1989-04 (Fairbanks) | — |
| 420 not on diagram | Part # 36420 | Solenoid Pack, E4OD 1989-94 (9 Pin) (.100” Thick Plastic Connector) | 1 |
| 420 not on diagram | Part # 36420AA | Solenoid Pack, E4OD/4R100 1995-97 (Diesel) Non-PWM Units (Also Fits 95-98 (Gas) Non-PWM Units) | 1 |
| 420 not on diagram | Part # 36420AC | Solenoid Pack, 4R100 1998-Up (Diesel) PWM Units (Also Fits 1999-Up (Gas) PWM Units) | 1 |
| 507 not on diagram | Part # 36507A | Poppet Valve, C-6 Drain Back (Valve Only-No Orifice Plug) This is the Valve Only—Does Not Include Cup Plug | — |
| 507 not on diagram | Part # 36507CCK | Valve Assembly, E4OD TCC Control (Valve, Spring, Plug, Clip)1989-97(.430”OD Valve) Fits 11 Bolt Stator | — |
| 507 not on diagram | Part # 36507CDK | Valve Assembly, 4R100 TCC Control (Valve, Spring, Plug, Clip) (Diesel) 1998-Up (.600”OD On Valve End Next To Spring) | — |
| 507 not on diagram | Part # 36507CGK | Valve Assembly, E4OD/4R100 TCC Control (Valve, Spring, Plug, Clip) (Gas) 1998-Up (.530”OD Valve) | — |
| 507 not on diagram | Part # 36507CK | Valve Assembly, E4OD/4R100 TCC Lock-Up Kit On-Off (Transgo) (Valve, Spring, Bushing) Converts Long Soft Pulse Lock-Up… | — |
| 507 not on diagram | Part # 36507E-1A | Drain Back Valve, E4OD/4R100 W/Spring (In Stator) | 1 |
| 507 not on diagram | Part # 36507PK | Valve Assembly, E4OD/4R100 Pressure Regulator Boost (Valve & Sleeve) Steel (Superior) | 1 |
| 507 not on diagram | Part # 36507PPK | Valve Assembly, E4OD/4R100 Pressure Regulator 1989-Up (Valve, 2 Springs, Spring Retainer, Boost Valve & Sleeve, Clip) | — |
| 507 not on diagram | Part # S36507CEK | Valve Assembly, 4R100 TCC Control Boost Valve & Sleeve (Sonnax) For PWM Units Only | — |
| 507 not on diagram | Part # S36507G-1 | Valve, E4OD Line To Lube Pressure Regulator (W/Check Valve) Sonnax | — |
| 507 not on diagram | Part # S36507PAK | Valve Assembly, E4OD/4R100 Pressure Regulator Boost (Sonnax) Factory Style No O-Rings (W/Valve & Sleeve) | — |
| 680 | Part # 36680 | Governor, C-6 (Cast # RF-C6) 1966-76 | 1 |
| 680 | Part # 36680A | Governor, C-6 (Cast # RF-D4) 1977-Up | 1 |
| 680 | Part # 36680B | Governor, C-6 (Cast# RF-E4TP) 1980-Up | 2 |
| 680 | Part # 36680BA | Governor, C-6 Diesel (Cast # 85TZ7C063) | 1 |
| 740 not on diagram | Part # 36740 | Valve Body, C-6 W/Detent 1966-69 | — |
| 740 not on diagram | Part # 36740A | Valve Body, C-6 1970-E77 | — |
| 740 not on diagram | Part # 36740B | Valve Body, C-6 (Gas) L1977-Up | — |
| 740 not on diagram | Part # 36740BD | Valve Body, C-6 (Diesel) L1977-Up (Use 36740B & T36165) | — |
| 740 not on diagram | Part # 36740C | Valve Body, E4OD (All) 1989 | — |
| 740 not on diagram | Part # 36740D | Valve Body, E4OD (All) 1990-95 | — |
| 740 not on diagram | Part # 36740DB | Valve Body, E4OD/4R100 (Non-PTO Models)(Cast # RF-F6) 1996-Up | 1 |
| 740 not on diagram | Part # 36740DC | Valve Body, 4R100 PTO Models (Cast # RF-F8) 1998-Up | 1 |
| 741 not on diagram | Part # 36741EBK | Accumulator Kit, E4OD/4R100 2nd/3rd/4th Accumulator Valves (Transgo) | — |
| 741 not on diagram | Part # 76741-5 | Check Ball, AOD/AODE Valve Body (.312” or 5/16”) (Viton) 1980-Up | 1 |
| 741 not on diagram | Part # A36741RK | Valve Assembly, C-6 (Steel Boost Valve & Sleeve) (Superior) | — |
| 741 not on diagram | Part # S36741EAK | Accumulator Kit, E4OD 2nd Accumulator Control Valve (1 Valve, 1 Retaining Clip & 4 Spring Shims)… | — |
| 741 not on diagram | Part # S36741EK | Accumulator Kit, E4OD 3rd/4th Accumulator Control Valve (1 Valve, 1Retaining Clip and 4 Spring Shims)… | — |
| 741 not on diagram | Part # S36741GAK | Valve & Sleeve, E4OD Line Pressure (.372”) (Sonnax) | 1 |
| 741 not on diagram | Part # S36741GK | Valve & Sleeve, E4OD Line Pressure (.331”) (Sonnax) | 1 |
| 741 not on diagram | Part # S36741ME-1K | Manual Valve, E4OD/4R100 With E-Clip (Oversized)(Sonnax) (Use With T-F-36947-TL13 And T-VB-Fix) | — |
| 741 not on diagram | Part # S36741PA-1 | Valve, C-6 Pressure Regulator (Oversized) (Must Use Reamer # T-36946-TL) (Sonnax) | — |
| 741 not on diagram | Part # S36741RAK | Valve & Sleeve Kit, C-6 Reverse Boost (O-Ring Style) (Diesel) (Sonnax) | 1 |
| 741 not on diagram | Part # S36741RBK | Valve & Sleeve Kit, Reverse Boost (OE Style) (Diesel) (Sonnax) | 1 |
| 741 not on diagram | Part # S36741RCK | Valve & Sleeve Kit, Reverse Boost (OE Style) (Gas) (Sonnax) | 1 |
| 741 not on diagram | Part # S36741RK | Valve & Sleeve Kit, C-6 Reverse Boost (O-Ring Style) (Gas) (Sonnax) | 1 |
| 741 not on diagram | Part # S36741UAK | Valve & Sleeve Kit, E4OD/4R100 Low/Reverse Modulator (Heavy Duty)(Holding Valve, Orificed Valve, Spring & Sleeve)… | — |
| 741 not on diagram | Part # S36741UK | Valve & Sleeve Kit, E4OD/4R100 Low/Reverse Modulator Valve (Plunger & Sleeve) 1996-Up (Sonnax) | — |
| 741 not on diagram | Part # S86741HDK | Valve & Sleeve, E4OD/4R100 Line Pressure Modulator (.427”OD) 1995-97 | 1 |
| 742 not on diagram | Part # 36742 | Accumulator Assembly, E4OD 1989 | — |
| 742 not on diagram | Part # 36742A | Accumulator Assembly, E4OD (Cast # RFE9) 1990-94 | 1 |
| 742 not on diagram | Part # 36742AA | Accumulator Assembly, E4OD (Cast # RFF5) 1995 | 1 |
| 742 not on diagram | Part # 36742B | Accumulator Assembly, E4OD/4R100 (Cast # RFF6 or RFF8) 1996-Up | 2 |
| 747 not on diagram | Part # 36747E | Seperator Plate, E4OD Valve Body (With 2 Half Moon & 1 U Notch) E1989 | 1 |
| 747 not on diagram | Part # 36747EA | Seperator Plate, E4OD Valve Body (With 1 Half Moon Notch) | — |
| 747 not on diagram | Part # 36747EB | Seperator Plate, E4OD Valve Body (With 1 Half Moon & 2 V Notches) | — |
| 747 not on diagram | Part # 36747EC | Seperator Plate, E4OD Valve Body (With 2 Half Moon Notches) | 1 |
| 747 not on diagram | Part # 36747ED | Seperator Plate, E4OD Valve Body (With 1 V Notch) | 1 |
| 747 not on diagram | Part # 36747EDB | Seperator Plate, E4OD Valve Body (With 3 V Notches) | — |
| 747 not on diagram | Part # 36747EF | Seperator Plate, E4OD Valve Body (With 1 Triangle Notch) | — |
| 747 not on diagram | Part # 36747EFB | Seperator Plate, E4OD Valve Body (With 3 Triangle Notches) | — |
| 747 not on diagram | Part # 36747EG | Seperator Plate, 4R100 Valve Body (With PTO) (Cast # F81Z-BA) 1998-Up | 1 |
| 747 not on diagram | Part # 36747EH | Seperator Plate, 4R100 Valve Body (Non PTO) (Cast # F81Z-DA) 1998-Up | 1 |
| 761 not on diagram | Part # 36761A-1 | Drain Back Valve, E4OD (Goes in 5/16” Cooler Line) | 1 |
| 927 not on diagram | Part # A36927CK | Accumulator Kit, E4OD/4R100 (3 Steel Pistons & 3 Springs) (Superior) | — |
| 996 | Part # 36996G | Cooler By-Pass Valve Assembly, E4OD/4R100 1997-Up (Retro Fit) The Front Cooler Line Fitting Attaches From The Bottom Of… | 1 |
| 996 | Part # 36996G-5K | Cooler By-Pass Check Ball Assembly, E4OD/4R100 (Contains: Check Ball, T-Valve, Spring, And 7 O-Rings) (Sonnax) | — |
| 996 | Part # 36996GA | Cooler By-Pass Valve Assembly, 4R100 1998-Up… | 1 |
| 996 | Part # S36996G-5K | Cooler By-Pass Check Ball Assembly, E4OD/4R100 (Contains: Check Ball, T-Valve, Spring, And 7 O-Rings) (Sonnax) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 26410 | Switch, C-4 Neutral Safety (With 1 Round 4 Blade Connector) | 2 |
| 410 | Part # 36410A | Switch, E4OD Manual Lever Position Switch 1990-96 Cast # F0 | 1 |
| 410 | Part # 36410B | Switch, E4OD Manual Lever Position Switch 1995-96 | 1 |
| 410 | Part # 36410C | Switch, E4OD/4R100 Manual Lever Position Switch (Cast # F7) 1997-04 (12 Pin Digital)… | 1 |
| 438 not on diagram | Part # 36438 | Sensor, 4R100 Turbine Shaft Speed (Non-PTO) 1998-04 (Also Fits 4R100 Output Shaft Speed Sensor, All Models) | 1 |
| 438 not on diagram | Part # 36438A | Sensor, 4R100 Turbine Shaft Speed (PTO Models) 1998-Up | — |
| 445 not on diagram | Part # 36445EAK | Repair Harness End, E4OD Plugs 1995-Up | — |
| 445 not on diagram | Part # 36445EK | Repair Harness End, E4OD Plugs 1989-94 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 36010A | Filter, C-6 2WD 1966-74 | 1 |
| 010 | Part # 36010B | Filter, C-6 2WD 1975-Up | 1 |
| 010 | Part # 36010C | Filter, C-6 4x4 1973-Up | 1 |
| 010 | Part # 36010E | Filter, E4OD/4R100 2WD 1989-Up | 1 |
| 010 | Part # 36010EA | Filter, E4OD/4R100 4X4 1989-Up | 1 |
| 014 | Part # 36014 | Screen, C-6 Governor | 1 |
| 016 not on diagram | Part # 36016 | Screen, E4OD/4R100 Solenoids (Fits On Seperator Plate) | 1 |
| 017 | Part # 36017 | Screen, C-6 Pump Inlet | — |
| 018 not on diagram | Part # 36018 | Screen W/Spring, E4OD Intermediate Accumulator 1991-96 (Sets in Case Under Spacer Plate) | 1 |
| 765 | Part # 36765 | Pan, C-6 2WD Shallow 1966-74 | 1 |
| 765 | Part # 36765A | Pan, C-6 2WD (1 7/8” Deep) 1975-Up | 1 |
| 765 | Part # 36765B | Pan, C-6 4x4 | 1 |
| 765 | Part # 36765C | Pan, E4OD 2WD | — |
| 765 | Part # 36765D | Pan, E4OD 4x4 | — |
| 765 | Part # 36765DA | Pan, 4R100 2WD (For Reusable Gasket) 1998-Up | — |
| 765 | Part # 36765E | Pan, 4R100 4x4 (For Reusable Gasket) W/Drain Plug 1998-Up | — |
| 765 | Part # 36765EA | Pan, 4R100 4x4 (For Reusable Gasket) No Drain Plug 1998-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 36070 | Seal, AOD Front W/Out Flange | 1 |
| 070 | Part # 36070A | Seal, C-4/C-5 Front (With Flange) | 1 |
| 070 | Part # 36070C | Seal, E4OD/4R100 Front Pump W/Flange (Black Viton) 1992-Up | — |
| 070 | Part # 36070E | Seal, AODE/4R70W Front Pump W/Flange (National) 1992-Up | 1 |
| 070 | Part # 76070A | Seal, AOD/AODE Front Pump W/Flange (.360” Thick) | — |
| 070 | Part # 76070B | Seal, AODE/4R70W/4R75W/4R70E/4R75E Front Pump W/Flange (Black Viton) 1992-Up (With Bonded Rubber On Outer Diameter) | 1 |
| 072 | Part # 36072 | Seal, 5R110W Linkage Shaft 2003-Up | 1 |
| 074 | Part # 36074 | Seal, 42RLE (Rear)(2.506”OD)(Without Boot) | 4 |
| 074 | Part # 36074B | Seal, 42RLE (Rear)(2.506”OD)(With Boot) | 1 |
| 074 | Part # 36074C | Seal, C-6 Rear (3.066”OD)(Truck W/Bolt On Yoke) 1968-Up | 1 |
| 074 | Part # 36074E | Seal, 4R100 Rear (3.180”OD)(Super Duty) 1998-Up | 1 |
| 178 not on diagram | Part # 36178AT | Ring, 5R110W Stator (Front) (Teflon) | — |
| 179 | Part # 36179 | Ring, C-6/E4OD/4R100 Direct Clutch (Metal) | 1 |
| 179 | Part # 36179A | Ring, E4OD/4R100 Coast Clutch (Metal) | — |
| 181 | Part # 36181 | Ring, C-6/E4OD/4R100 Forward Clutch (Metal) 1966-Up | 1 |
| 189 | Part # 26189 | Ring, C-4/C-5 Governor (2.687”OD) (.093” Wide) Metal 1964-86 | 1 |
| 300 | Part # 36300 | Gasket, C-6 Bottom Pan | 1 |
| 300 | Part # 36300E | Gasket, E4OD/4R100 Bottom Pan (Cork) 1989-Up | 1 |
| 300 | Part # 36300EW | Gasket, 5R110W Bottom Pan (Bonded Rubber) 2003-Up | 1 |
| 305 | Part # 36305 | Gasket, C-6 Extension Housing | 1 |
| 305 | Part # 36305E | Gasket, E4OD/4R100 Extension Housing | 1 |
| 307 | Part # 36307A | Gasket, C-6 Intermediate Servo Cover | 1 |
| 309 not on diagram | Part # 36309E | Gasket, 5R110W Pump Bolt Washer 2003-Up | 2 |
| 310 not on diagram | Part # 36310 | Gasket, C-6 Pump | 1 |
| 310 not on diagram | Part # 36310E | Gasket, E4OD/4R100 Pump | 1 |
| 311 not on diagram | Part # 36311 | O-Ring, C-6 Pump | 1 |
| 311 not on diagram | Part # 36311E | O-Ring, 5R110W Pump 2003-Up | 1 |
| 317 not on diagram | Part # M301317B | Gasket, 1000/2000 Allison Extension Housing To Transfer Case 2000-Up | — |
| 317 not on diagram | Part # M302317A | Gasket, 350/350C Extension Housing (Adapter) to 205 Transfer Case 1969-86 | — |
| 317 not on diagram | Part # M304317A | Gasket, C-6/E4OD Adapter To transfer Case (208 Transfer Case) | — |
| 319 not on diagram | Part # 36319E | Gasket, 4R100 PTO Cover 1998-Up | — |
| 320 not on diagram | Part # 36320E | Gasket, E4OD Spacer Plate To Case (Upper) 1989 Only (White Stripe) | 1 |
| 320 not on diagram | Part # 36320EA | Gasket, E4OD Spacer Plate To Case (Upper) 1990-95 | 1 |
| 320 not on diagram | Part # 36320EB | Gasket, E4OD Spacer Plate To Case (Upper) 1996-97 | 1 |
| 320 not on diagram | Part # 36320EC | Gasket, E4OD/4R100 Spacer Plate To Case (Upper) 1998-05 (Light Blue Stripe) | — |
| 320 not on diagram | Part # 36320ED | Gasket, E4OD/4R100 Spacer Plate To Case (Upper) 1998-05 (For PTO Models) | — |
| 321 | Part # 36321 | Gasket, C-6 Valve Body (Lower) 1967-Up | 1 |
| 321 | Part # 36321A | Gasket, C-6 Valve Body (Lower) 1966 | — |
| 321 | Part # 36321E | Gasket, E4OD Valve Body To Spacer Plate (Lower) 1989 (White Stripe) | 1 |
| 321 | Part # 36321EA | Gasket, E4OD Valve Body To Spacer Plate (Lower) 1990-95 (.008” Thick)(Yellow Stripe) | 1 |
| 321 | Part # 36321EAA | Gasket, E4OD Valve Body To Spacer Plate (Lower) 1996-97 (.008” Thick)(No Stripe) | — |
| 321 | Part # 36321EB | Gasket, E4OD/4R100 Valve Body To Spacer Plate (Lower) 1998-05 (.008”Thick)(No Stripe) | 1 |
| 326 | Part # 36326 | Gasket, C-6 Oil Filter | 1 |
| 330 not on diagram | Part # 36330 | Lip Seal, E4OD/4R100 Intermediate & Overdrive Clutch (Inner)… | 1 |
| 331 not on diagram | Part # 36331 | Lip Seal, E4OD Overdrive Clutch (Outer) W/Aluminum Piston 1989-95 | 1 |
| 332 not on diagram | Part # 36332 | Lip Seal, E4OD/4R100 Intermediate Clutch (Outer) 1989-Up | 1 |
| 334 | Part # 36334 | Lip Seal, C-6/E4OD/4R100 Forward Clutch (Inner) | 1 |
| 335 | Part # 36335A | Lip Seal, C-6/E4OD/4R100 Forward Clutch (Outer) | 1 |
| 336 | Part # 36336 | Lathe Cut Seal, C-6 Direct Clutch (Inner) L1976-Up | 1 |
| 336 | Part # 36336E | Lip Seal, E4OD/4R100 Direct Clutch (Inner) 1989-04 | — |
| 337 | Part # 36337 | Lathe Cut Seal, C-6 Direct Clutch (Outer) | 1 |
| 337 | Part # 36337E | Lip Seal, E4OD/4R100 Direct Clutch (Outer) 1989-04 | — |
| 337 | Part # 36337V | Lip Seal, C6 Direct Clutch (Outer)(Viton) 1989-Up | — |
| 338 | Part # 36338 | Lathe Cut Seal, C-6/E4OD Reverse Clutch (Inner) 1968-95 | 1 |
| 338 | Part # 36338B | Lip Seal, E4OD/4R100 Reverse Clutch (Inner) 1996-Up | 1 |
| 339 | Part # 36339 | Lathe Cut Seal, C-6/E4OD Reverse Clutch (Outer) 1966-95 | 1 |
| 339 | Part # 36339B | Lip Seal, E4OD/4R100 Reverse Clutch (Outer) 1996-Up | 1 |
| 340 not on diagram | Part # 36340 | Lip Seal, E4OD/4R100 Coast Clutch (Inner) Cast Iron Drum | 1 |
| 341 not on diagram | Part # 36341 | Lip Seal, E4OD/4R100 Coast Clutch (Outer) Cast Iron Drum | 1 |
| 347 not on diagram | Part # 36347 | O-Ring, E4OD/4R100 Solenoid Pack Connector 1989-Up | 1 |
| 349 not on diagram | Part # 36349 | O-Ring, C-3/A4LD Throttle Shaft (No Lobes) | 1 |
| 349 not on diagram | Part # 36349A | O-Ring, C-3/A4LD Throttle Shaft (With 4 Lobes) | — |
| 361 | Part # 36361A | O-Ring, C-6 Intermediate Servo Piston (Small) 1.700”OD | — |
| 361 | Part # 36361AA | O-Ring, C-6 Intermediate Servo Piston (Small) 1.750”OD | — |
| 361 | Part # 36361AB | O-Ring, C-6 Intermediate Servo Piston (Small) 1.760”OD | — |
| 361 | Part # 36361AC | O-Ring, C-6 Intermediate Servo Piston (Small) 1.785”OD | — |
| 361 | Part # 36361AD | O-Ring, C-6 Intermediate Servo Piston (Small) 2.030”OD | — |
| 361 | Part # 36361AE | O-Ring, C-6 Intermediate Servo Piston (Small) 2.060”OD | — |
| 361 | Part # 36361AG | O-Ring, C-6 Intermediate Servo Piston (Small) 2.180”OD | — |
| 361 | Part # 36361B | O-Ring, C-6 Intermediate Servo Piston (Large) 2.344”OD | — |
| 361 | Part # 36361BA | O-Ring, C-6 Intermediate Servo Piston (Large) 2.391”OD | — |
| 361 | Part # 36361BB | O-Ring, C-6 Intermediate Servo Piston (Large) 2.690”OD | — |
| 361 | Part # 36361BC | O-Ring, C-6 Intermediate Servo Piston (Large) 2.725”OD | — |
| 361 | Part # 36361BD | O-Ring, C-6 Intermediate Servo Piston (Large) 2.735”OD | — |
| 361 | Part # 36361BE | O-Ring, C-6 Intermediate Servo Piston (Large) 2.782”OD | — |
| 361 | Part # 36361BG | O-Ring, C-6 Intermediate Servo Piston (Large) 3.151”OD | — |
| 362 | Part # 36362 | O-Ring, C-6 Intermediate Servo Cover | — |
| 364 not on diagram | Part # 36364T | O-Ring, C-6 Cooler Line | 1 |
| 378 not on diagram | Part # 36378E | O-Ring, 5R110W Cooler Line Fitting (Large) | — |
| 378 not on diagram | Part # 36378EA | O-Ring, 5R110W Cooler Line (Small) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 36034 | Bushing, AOD/AODE/4R70W/4R75E/4R70E/4R75E Pump (Babbit) (.760” Tall) 1980-Up | 1 |
| 034 | Part # 36034B | Bushing, C-6 Pump Body (Bronze) (.755” Tall) | 1 |
| 034 | Part # 36034E | Bushing, AOD/AODE/4R70W/4R75W/4R70E/4R75E Pump Body (Bronze)(.760" Tall) | — |
| 034 | Part # 36034EB | Bushing, 5R110W Pump Body (Bronze) (.702” Tall) 2003-Up (Can Use 76034) | — |
| 034 | Part # 76034 | Bushing, 5R110W Pump (Bronze) (.702” Tall) 2003-Up (Can Use 36034EB) | — |
| 036 | Part # 36036 | Bushing, 5R110W Stator (Front) | 1 |
| 037 | Part # 36037 | Bushing, 5R110W Stator (Rear) | 1 |
| 038 not on diagram | Part # 36038 | Bushing, 4R100 Coast Clutch Drum 1998-Up (2.492”OD) | — |
| 038 not on diagram | Part # 36038A | Bushing, E4OD/4R100 Coast Clutch Drum (Bronze) 1998-Up (Stamped Steel Drums) | — |
| 040 | Part # 36040 | Bushing, 5R110W Shell W/Sun Gear (Takes 2) 2003-Up | 1 |
| 046 | Part # 36046 | Bushing, C-6 Direct Drum (Rear)(1.241” Wide) | 1 |
| 046 | Part # 36046A | Bushing, E4OD/4R100 Direct Drum (Rear) (1.111” Wide) | — |
| 046 | Part # 36046B | Bushing, C-6/E4OD/4R100 Direct Drum (Front)(.359” Wide) | 1 |
| 046 | Part # 56046B | Bushing, C-3/A4LD/4R44E/4R55E/5R55E Direct & Overdrive Drum (Stamped Steel Drum) (2.340”OD)(Narrow Grooves) | — |
| 062 not on diagram | Part # 56062 | Bushing, A4LD Output Shaft Pilot 1985-89 | — |
| 062 not on diagram | Part # 56062A | Bearing, A4LD/4R44E/4R55E/5R55E Output Shaft Pilot 1990-Up (Use 56268) | — |
| 064 | Part # 36064 | Bushing, C-6/E4OD/4R100 Case (W/3 Oil Grooves) Fits C-6 Front & E4OD/4R100 Front & Rear (2 Piece Type) | 1 |
| 064 | Part # 36064B | Bushing, C-6 Case (Rear) W/Out Oil Groove (2 Piece Type) | 1 |
| 064 | Part # 36064BA | Bushing, C-6/E4OD/4R100 Case (W/1 Oil Groove) (Rear) (2 Piece Type) | — |
| 064 | Part # S36064H | Bushing, C-6/E4OD Case (Early 1 Piece Type)Sonnax 1989-94 (With 3 Grooves To The Front) | — |
| 064 | Part # S36064HA | Bushing, E4OD/4R100 Case (Sold Seperately) 1995-Up (Sonnax)(Late 1 Piece Type)… | — |
| 064 | Part # S36064HAX | Bushing, E4OD/4R100 Case (Late 1 Piece Type) 1995-Up (Sonnax) (Oversized) (Use With T-36008A, T-36605-03, T-36605-04) | — |
| 064 | Part # S36064HX | Bushing, C-6/E4OD Case (Early 1 Piece Type) 1989-97 (Sonnax) (Oversized) (Use With T-36008A, T-36605-03, T-36605-04) | 1 |
| 066 | Part # 36066 | Bushing , A727/A518/A618/48RE Extension Housing (1.690”ID)(Bronze)(Does Not Fit 48RE 03-Up) 1965-Up | 2 |
| 066 | Part # 36066B | Bushing, C-6 Extension Housing (Babbit) | 1 |
| 066 | Part # 36066D | Bushing, 4R100 Extension Housing (Super Duty)(1.890”ID) 1998-Up (Teflon Coated) | — |
| 066 | Part # 36066T | Bushing , A727/A518/A618 Extension Housing (1.690”ID)(Teflon Coated) 1965-Up | — |
| 210 | Part # 36210A | Washer, C-6 Stator Support .057” (Metal) | 1 |
| 210 | Part # 36210AA | Washer, C-6 Stator Support .057” (Plastic) | 1 |
| 210 | Part # 36210B | Washer, C-6 Stator, Support .074” (Metal) | 1 |
| 210 | Part # 36210BA | Washer, C-6 Stator Support .074” (Plastic) | 1 |
| 210 | Part # 36210C | Washer, C-6 Stator Support .089” (Metal) | 1 |
| 210 | Part # 36210CA | Washer, C-6 Stator Support .089” (Plastic) | 1 |
| 210 | Part # 36210D | Washer, C-6 Stator Support .104” (Metal) | 1 |
| 210 | Part # 36210DA | Washer, C-6 Stator Support .104” (Plastic) | 1 |
| 210 | Part # 36210E | Washer, C-6 Stator Support .119” (Metal) | 1 |
| 210 | Part # 36210EA | Washer, C-6 Stator Support .119” (Plastic) | 1 |
| 210 | Part # 36210G | Washer, E4OD/4R100 Stator Support (Metal) | — |
| 210 | Part # 36210GA | Washer, 5R110W Stator (.055” Thick) (Plastic) 2003-Up | — |
| 211 not on diagram | Part # 36211 | Bearing, 5R110W Stator To Overdrive Sun Gear 2003-Up | 2 |
| 211 not on diagram | Part # 66211 | Bearing W/Races, E4OD/4R100 Center Support To Forward Drum (.140” Thick, 2.600”OD, 1.930”ID) | 1 |
| 213 not on diagram | Part # 36213E | Ball Bearing, E4OD/4R100 Coast Clutch Drum To Stator (PTO Type Only) (Used In Place Of Bushing #… | — |
| 214 not on diagram | Part # 36214 | Washer, E4OD Overdrive Planet To Overdrive Sprag (W/2 Inner Tabs) (Metal) 1989-97 | — |
| 214 not on diagram | Part # 36214A | Washer, E4OD Overdrive Planet To Overdrive Sprag (W/2 Inner Tabs) (Plastic) 1997-98 | 1 |
| 214 not on diagram | Part # 36214B | Washer, 4R100 Overdrive Planet To Overdrive Sprag 1999-Up (Plastic) This Washer Has a V Notch | 1 |
| 217 not on diagram | Part # 36217 | Bearing W/Races, 5R110W Overdrive Planet To Hub 2003-Up | 2 |
| 223 not on diagram | Part # 36223 | Replaced by 36254C | — |
| 224 not on diagram | Part # 36224 | Ball Bearing, E4OD/4R100 (Presses In Center Support) Aftermarket Type (1.000”ID, 2.000”OD) | — |
| 224 not on diagram | Part # 36224A | Ball Bearing, E4OD/4R100 (Presses In Center Support) OE Type (1.180”ID, 1.850”OD) | 1 |
| 225 not on diagram | Part # 36225 | Washer, E4OD/4R100 Center Support To Direct Drum (Plastic) | 1 |
| 225 not on diagram | Part # 36225B | Washer, E4OD/4R100 Center Support To Direct Drum (Metal) | 1 |
| 226 not on diagram | Part # 36226 | Replaced by 66211 | — |
| 227 not on diagram | Part # 36227 | Washer, E4OD/4R100 Intermediate Drum To Sprag (Metal) | — |
| 227 not on diagram | Part # 36227A | Washer, E4OD/4R100 Intermediate Drum To Sprag (Plastic) | 1 |
| 229 | Part # 36229 | Washer, C-6 Direct Drum To Forward Drum (3.030”ID At Tabs) | 1 |
| 229 | Part # 36229A | Washer, E4OD Direct Drum To Forward Drum 1989-97 (3.215”ID At Tabs)(1998-Up Does Not Use Washer Here) | 1 |
| 231 | Part # 36231 | Washer, 5R110W Forward Drum To Hub (2.865”OD With 3 Half Round Tabs) 2003-04 (For Small Planet) | 1 |
| 231 | Part # 36231A | Washer, C-6/E4OD/4R100 Forward Drum To Hub (Metal) | — |
| 232 | Part # 36232 | Bearing W/Out Races, C-6 Forward Drum To Forward Planet (3 Piece Type) Also FitsC-6 Forward Planet To Sun Gear | 1 |
| 232 | Part # 36232A | Bearing W/Races, C-6/E4OD/4R100 Forward Drum To Forward Planet (1 Piece Type)… | 1 |
| 235 | Part # 36235 | Washer, E4OD Forward Hub To Forward Planet (4 Tab) For 4 Gear Planet (Also Fits E4OD Rear Planet (Both Sides) 4 Gear) | 1 |
| 235 | Part # 36235A | Washer, E4OD Forward Hub To Forward Planet (3 NarrowTabs) For 3 Gear Forward Planet | 1 |
| 235 | Part # 36235AA | Washer, E4OD/4R100 Rear Planet (3 Wide Tabs) For 3 or 6 Gear Rear Planet | 1 |
| 235 | Part # 36235B | Washer, C-6 Front & Rear Planet (6 Tab) For 3 Gear Planet | 1 |
| 235 | Part # 36235C | Washer, C-6 Rear Planet (4 Tab) For 4 Gear Planet | 1 |
| 235 | Part # 36235CA | Bearing W/Races, 5R110W Forward Hub To Forward Planet 2003-04 (.157” Thick)(3.385”OD) | 1 |
| 237 not on diagram | Part # 36237 | Race, C-6 Sun Gear (Front) 1966-77 | 1 |
| 238 | Part # 36238 | Bearing W/Out Races, C-6 Forward Planet To Sun Gear (3 Piece Type) Stays In Planet (Use 36232) | 1 |
| 238 | Part # 36238A | Bearing W/Races, AOD/AODE/4R70W/4R75W/4R70E/4R75E Forward Drum To Hub 1980-Up | 2 |
| 239 not on diagram | Part # 36239 | Race, C-6 Sun Gear (Rear) 1966-77 | 1 |
| 243 | Part # 36243 | Race, C-6/E4OD/4R100 Input Shell | 1 |
| 243 | Part # S36243S | Shim, C-6 Sun Shell Saver (Fits Between Shell & Snap Ring) Sonnax | — |
| 254 | Part # 36254 | Washer, C-6 Output Hub To Sprag Race (2 Tang) 1966-69 | 1 |
| 254 | Part # 36254A | Washer, C-6 Output Hub To Sprag Race (3 Tang) 1970-76 (Use 26251) | — |
| 254 | Part # 36254B | Bearing W/Race, C-6 Output Hub To Sprag Race | 1 |
| 254 | Part # 36254C | Bearing W/Races, 5R110W Overdrive Hub To Center Support (#223) 2003-Up | 1 |
| 263 | Part # 36263 | Washer, C-6/E4OD Parking Gear To Case | 1 |
| 263 | Part # 36263A | Bearing W/Races, 4R100 Parking Gear To Case 1998-Up | — |
| 286 | Part # 36286 | Washer, C-6/E4OD Sprag To Snap Ring | — |
| 660 not on diagram | Part # 36660 | Inner Race, E4OD Overdrive Sprag (For Lug Type Sprag) 1989-Up | — |
| 661 not on diagram | Part # 36661 | Outer Race, E4OD Overdrive Sprag (4.015”ID) 1989-94 | — |
| 661 not on diagram | Part # 36661A | Outer Race, E4OD Overdrive Sprag (4.090”ID) 1995-Up | — |
| 661 not on diagram | Part # 36661D | Outer Race, 4R100 Overdrive Sprag (3.313”ID) 1998-Up | 1 |
| 663 not on diagram | Part # 36663 | Outer Race, E4OD/4R100 Intermediate Sprag (Lug Type) 1989-Up | — |
| 664 | Part # 36664 | Inner Race, C-6 Rear Sprag (1.089” Thick) 1966-69 (Can Use 36664A) | — |
| 664 | Part # 36664A | Inner Race, C-6 Rear Sprag (1.089” Thick) 1970-E76 (Will Retro Fit 1966-E76) | — |
| 664 | Part # 36664B | Inner Race, C-6 Rear Sprag (1.040” Thick) L1976-88 | — |
| 664 | Part # 36664E | Inner Race, C-6/E4OD Rear Sprag (1.013” Thick)(3.198”OD) 1989-97 | 1 |
| 664 | Part # 36664F | Inner Race, E4OD/4R100 Rear Sprag (3.398”OD) 1998-Up (Fits 17 Roller Sprag) | 1 |
| 783 not on diagram | Part # 36783-S | Shim, E4OD/4R100 Center Support Bolt To Case (Aluminum) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 36022 | Band, C-6 Intermediate (Flex) | 1 |
| 022 | Part # 36022A | Band, C-6 Intermediate (Rigid) (1 3/4” Wide) | — |
| 022 | Part # 36022B | Band, C-6 Intermediate (Rigid) (2 1/4” Wide) 1967-69 | — |
| 022 | Part # 36022E | Band, E4OD/4R100 Intermediate (Flex) 1989-Up | 1 |
| 022 | Part # 36022K | Band, C-6 Intermediate (Flex)(Raybestos Pro Series) | — |
| 022 | Part # 36022S | Band, C-6 Intermediate (Slip On or Snap Band) | — |
| 905 | Part # 36905B | Servo Assembly, C-6 Super Servo | — |
| 905 | Part # 36905E | Servo Assembly, E4OD (1st Design) (Uses Cover # 909) | — |
| 907 | Part # 36907DK | Servo Kit, C-6 Intermediate Servo (R-Code) | — |
| 916 | Part # 36916-1 | Servo Lever, C-6 Intermediate Band | — |
| 916 | Part # 36916-2 | Band Strut, C-6 Intermediate (Flat) | 1 |
| 916 | Part # 36916-3 | Band Anchor Strut, C-6 Intermediate (Wedge Shaped) | — |
| 916 | Part # 36916A-1 | Servo Lever, C-6 Stock Lever | — |
| 916 | Part # S36916-1 | Servo Lever, C-6 Intermediate Hi-Performance (R-Code) (Sonax) (OEM “E” Ratio 1.85) | — |
| 916 | Part # S36916-1FF | Servo Lever, C-6 Intermediate Hi-Performance (Not For “H” or “R” Codes) (Sonnax) (Non Stock Ratio 2.82) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 36500 | Pump, C-6 1966-E67 | — |
| 500 not on diagram | Part # 36500A | Pump, C-6 (Gas) 1967-Up (W/Drain Back Valve) | 1 |
| 500 not on diagram | Part # 36500B | Pump, C-6 (Gas & Diesel) 1983-Up (W/Out Drain Back Valve) | — |
| 500 not on diagram | Part # 36500C | Pump, E4OD (Cast # RFE9 or RFF1) 11 Bolt (Less Valves) 1989-94 | 3 |
| 500 not on diagram | Part # 36500CA | Pump, E4OD (Cast # RFF5) 11 Bolt (Less Valves) 1995-98 (9 Teeth Inner Gear)Retro Fits To 1989 | 2 |
| 500 not on diagram | Part # 36500D | Pump, E4OD/4R100 (Cast # RF-F8) 12 Bolt (Less Valves) 1998-Up (Uses A Cast Iron Coast Clutch Drum) | 1 |
| 500 not on diagram | Part # 36500DA | Pump, 4R100 (Cast # RFF8) 12 Bolt (Less Valves) 1998-Up (Uses A Stamped Steel Coast Clutch Drum) Non-PWM | 2 |
| 500 not on diagram | Part # 36500DB | Pump, 4R100 (Cast # RFF8) 12 Bolt (Less Valves) 1998-Up (Uses A Stamped Steel Coast Clutch Drum) PWM Type | 2 |
| 507 not on diagram | Part # 36507EK | Pump Kit, E4OD (Code 62 Fix) (Bushing, Drain Back Valve & Plugs) | — |
| 510 not on diagram | Part # 36510 | Pump Body, C-6 1966-Up | — |
| 510 not on diagram | Part # 36510C | Pump Body, E4OD (Cast # RFE9) 11 Bolt 1989-94 (3.950”OD Outer Gear, 10 Teeth Inner Gear) Can Use 36510CA | 1 |
| 510 not on diagram | Part # 36510CA | Pump Body, E4OD (Cast # RFE9, RFF1, RFF5) 11 Bolt 1989-98 | 3 |
| 510 not on diagram | Part # 36510D | Pump Body, E4OD/4R100 (Cast # RFF8)(12 Bolt) 1998-Up | 1 |
| 520 | Part # 36520 | Stator, C-6 1966-E67 | — |
| 520 | Part # 36520A | Stator, C-6 (Gas) L1967-Up (W/Drain Back Valve) Can Use 36520B | — |
| 520 | Part # 36520B | Stator, C-6 (Gas & Diesel) 1983-Up (No Drain Back Valve) | — |
| 520 | Part # 36520C | Stator, E4OD (Less Valves) (Cast # RFEP or RFF1) 1989-94 | 1 |
| 520 | Part # 36520CA | Stator, E4OD (Less Valves) (Cast # RFF5) Bushing Type 1995-97 | 1 |
| 520 | Part # 36520D | Stator, E4OD/4R100 (Cast # RF-F8)(12 Bolts To Body) 1998-Up (Less Valves) (Uses A Cast Iron Coast Clutch Drum | 1 |
| 520 | Part # 36520DA | Stator, 4R100 (Non PWM) (Gas & Diesel)(12 Bolt) 1998-Up (Uses Stamped Steel Coast Clutch Drum) (Less Valves) | — |
| 520 | Part # 36520DB | Stator, 4R100 (PWM) (Gas & Diesel)(12 Bolt) 1998-Up (Uses Stamped Steel Coast Clutch Drum) (Less Valves) | — |
| 530 | Part # 36530A | Pump Gears, E4OD (10 Teeth Inner Gear)(3.950”OD Outer Gear) 1989-94 | — |
| 530 | Part # 36530B | Pump Gears, E4OD/4R100 (9 Teeth Inner Gear)(4.083”OD Outer Gear) 1995-Up | — |
| 530 | Part # 36530BX | Pump Gears, E4OD/4R100 (9 Teeth Inner Gear) (Oversize) 1995-Up | — |
| 530 | Part # 36530X | Pump Gears, C-6 (Oversized) | — |
| 848 | Part # 36848E | Rotor, 4R100 (18 Teeth) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 not on diagram | Part # 36100 | Friction, E4OD/4R100 Overdrive Clutch (.078”) (64 Teeth) 1989-Up | 1 |
| 100 not on diagram | Part # 36100EA | Friction, 4R100 Overdrive Clutch (.078”)(32 Teeth) 1998-Up | 1 |
| 100 not on diagram | Part # 36100EAHP | Friction, 4R100 Overdrive Clutch (.078”) 32 Teeth (Hi-Performance) 1998-Up | — |
| 100 not on diagram | Part # 36100EB | Friction, 4R100 Overdrive Clutch (.078”) 32 Teeth 1998-Up | — |
| 100 not on diagram | Part # 136100A | Friction, 4R100 Overdrive Clutch (.078”)(32 Teeth)(High Energy) 1998-Up | 1 |
| 104 not on diagram | Part # 36104E | Friction, E4OD Intermediate Clutch (.078”)(50 Teeth)(Waffle) 1989-Up | 1 |
| 104 not on diagram | Part # 36104EA | Friction, E4OD/4R100 Intermediate Clutch (.078”)(50 Teeth)(Starburst) 1998-Up | 1 |
| 104 not on diagram | Part # 36104EAS1 | Friction, E4OD/4R100 Intermediate Clutch (.078”)(50 Teeth)(Starburst)(Stage 1) 1998-Up Retro Fits To 1989 | — |
| 104 not on diagram | Part # 36104EB | Friction, E4OD/4R100 Intermediate Clutch (.078”) (50 Teeth) (Hi-Energy) 2001-Up | — |
| 104 not on diagram | Part # 36104EHP | Friction, E4OD/4R100 Intermediate Clutch (.078”) (50 Teeth) (Hi-Performance) 1989-Up | — |
| 106 | Part # 36106 | Friction, C-6/E4OD/4R100 Direct Clutch (.077”) (Waffle)(Grey) 1966-Up | 1 |
| 106 | Part # 36106B | Friction, E4OD/4R100 Direct Clutch (.077) (Grooved)(Tan) 1996-Up | — |
| 106 | Part # 36106CS1 | Friction, C-6/E4OD/4R100 Direct Clutch (.062”)(Stage 1) 1966-Up | — |
| 106 | Part # 36106E | Friction, E4OD/4R100 Direct Clutch (.077”) (Smooth) 1989-Up | 1 |
| 106 | Part # 36106HP | Friction, C-6/E4OD Direct Clutch (.077”) (Hi-Performance) 1966-Up | — |
| 108 | Part # 36108 | Friction, C-6 Forward Clutch (.060”)(Square Teeth)(Waffle) 1966-E67 | — |
| 108 | Part # 36108A | Friction, C-6 Forward Clutch (.061”) (Smooth) 1967-E76 | 1 |
| 108 | Part # 36108AHP | Friction, C6 Forward Clutch (.061”) (Red Eagle High Performance) 1967-E76 (Alto) | — |
| 108 | Part # 36108B | Friction, C-6/E4OD Forward Clutch (.075”) (Smooth) L1976-Up | 1 |
| 108 | Part # 36108BHP | Friction, C-6/E4OD Forward Clutch (.075”) (Hi-Performance) L1976-Up | — |
| 108 | Part # 36108C | Friction, C-6/E4OD/4R100 Forward Clutch (.075”) (Hardcore)(Smooth) | 1 |
| 110 | Part # 36110 | Friction, 5R110W Low/Reverse Clutch (.078”)(72 Teeth) 2003-Up | 1 |
| 110 | Part # 36110EA | Friction, E4OD/4R100 Reverse Clutch (.078”) 24 Teeth 1998-Up | 1 |
| 110 | Part # 36110EAHP | Friction, E4OD/4R100 Reverse Clutch (.078”) 24 Teeth (Hi Performance)(Brown) 1998-Up | — |
| 110 | Part # 36110HP | Friction, C-6/E4OD Reverse Clutch (.075”) (72 Teeth) (Hi-Performance) 1966-E97 | — |
| 112 not on diagram | Part # 36112 | Friction, E4OD/4R100 Coast Clutch (.078”) 1989-Up | 1 |
| 112 not on diagram | Part # 36112HP | Friction, E4OD/4R100 Coast Clutch (.078”) Hi-Performance 1989-Up | — |
| 119 not on diagram | Part # 36119A | Friction Module, C-6 L1967-E76 | — |
| 119 not on diagram | Part # 36119B | Friction Module, C6 L1976-Up | — |
| 119 not on diagram | Part # 36119BHP | Friction Module, C-6 (Hi-Performance) Indy Reds 1967-Up | — |
| 119 not on diagram | Part # 36119BS1 | Friction Module, C-6 (Stage 1) L1976-Up | — |
| 119 not on diagram | Part # 36119E | Friction Module, E4OD 1989-95 | — |
| 119 not on diagram | Part # 36119EB | Friction Module, E4OD (With 72 Teeth Reverse Frictions) 1996-E97 (Retro Fits 1989-E97) | — |
| 119 not on diagram | Part # 36119ED | Friction Module, E4OD/4R100 (With 24 Teeth Reverse & 64 Teeth Overdrive Frictions) L1997-L98 | — |
| 119 not on diagram | Part # 36119EG | Friction Module, 4R100 (With 24 Teeth Reverse & 32 Teeth Overdrive Frictions) 1998-Up | — |
| 119 not on diagram | Part # 36119EGHP | Friction Module, 4R100 (With 24 Teeth Reverse & 32 Teeth Overdrive Frictions)(Generation 2) 1998-Up | — |
| 119 not on diagram | Part # 36119EGS1 | Friction Module, 4R100 (With 24 Teeth Reverse & 32 Teeth Overdrive Frictions) (Stage 1) 1998-Up | — |
| 119 not on diagram | Part # 36119EHP | Friction Module, E4OD (Generation 2) 1989-95 | — |
| 119 not on diagram | Part # 36119ES1 | Friction Module, E4OD (Stage 1) 1989-95 | — |
| 120 not on diagram | Part # 36120 | Steel, E4OD/4R100 Overdrive Clutch (.080”)(6 Teeth) 1989-Up | 1 |
| 120 not on diagram | Part # 36120HP | Steel, E4OD/4R100 Overdrive Clutch (.080”)(6 Teeth)(Kolene) 1989-Up | — |
| 124 not on diagram | Part # 36124 | Steel, E4OD/4R100 Intermediate Clutch (.080”) 1989-Up | 1 |
| 124 not on diagram | Part # 36124A | Steel, 4R100 Intermediate Clutch (.125”) 1998-Up (Use 36145) | — |
| 124 not on diagram | Part # 36124HP | Steel, E4OD/4R100 Intermediate Clutch (.080”)(Koleen) 1989-Up | — |
| 126 | Part # 36126 | Steel, C-6/E4OD/4R100 Forward & Direct Clutch (.078”) 1966-Up | 1 |
| 126 | Part # 36126A | Steel, C-6/E4OD/4R100 Forward & Direct Clutch (.078”) Kolene | — |
| 126 | Part # 36126B | Steel, C-6 Forward Clutch .081” (Waved) (26 Teeth) 1967-76 | — |
| 126 | Part # 36126X | Steel, C-6/E4OD/4R100 Forward & Direct (.095”) (Oversized) | — |
| 130 | Part # 36130 | Steel, 5R110W Low/Reverse Clutch (.068”) 2003-Up | 1 |
| 130 | Part # 36130A | Steel, 5R110W Low/Reverse Clutch (.068”)(Kolene) 2003-Up | — |
| 130 | Part # 36130X | Steel, C-6/E4OD/4R100 Reverse Clutch (.081”) (Oversized) | — |
| 132 not on diagram | Part # 36132 | Steel, E4OD/4R100 Coast Clutch (.080”)(60 Teeth) 1989-Up (For Cast Iron Drum) | 1 |
| 132 not on diagram | Part # 36132E | Steel, 4R100 Coast Clutch (.079”)(32 Teeth) 1998-Up (For Stamped Steel Drum) | 1 |
| 139 not on diagram | Part # 36139 | Steel Module, C-6 1966-Up | — |
| 139 not on diagram | Part # 36139E | Steel Module, E4OD/4R100 (W/Cast Iron Coast Clutch Drum) 1989-98 | — |
| 139 not on diagram | Part # 36139ED | Steel Module, E4OD/4R100 L1997-L98 | — |
| 139 not on diagram | Part # 36139EG | Steel Module, 4R100 (With .125” Thick Intermediate Steels) 1998-Up | — |
| 139 not on diagram | Part # 36139EHP | Steel Module, E4OD/4R100 (High Performance)(Kolene)1989-98 (With Cast Iron Coast Clutch Drum) | — |
| 139 not on diagram | Part # 36139HP | Steel Module, C6 1996-Up (High Performance) | — |
| 140 not on diagram | Part # 36140 | Pressure Plate, E4OD Overdrive Clutch (.490”) | 1 |
| 140 not on diagram | Part # 36140A | Pressure Plate, 5R110W Overdrive Clutch (.320”)(6 Teeth) 2003-04 | 1 |
| 140 not on diagram | Part # 36140B | Pressure Plate, E4OD/4R100 Overdrive Clutch (.203”)(6 Teeth) | — |
| 144 not on diagram | Part # 36144 | Pressure Plate, E4OD Intermediate Clutch (Rear) (.580”) | 1 |
| 144 not on diagram | Part # 36144A | Pressure Plate, E4OD Intermediate Clutch (Rear) (.415”) | 1 |
| 144 not on diagram | Part # 36144B | Pressure Plate, 4R100 Intermediate Clutch (Rear) (.325”) | — |
| 145 not on diagram | Part # 36145 | Pressure Plate, 5R110W (Intermediate Steel #124) 2003-04 | 1 |
| 146 | Part # 36146 | Pressure Plate, C-6/E4OD/4R100 Forward & Direct Clutch (Top) Flat (.337”) | 1 |
| 146 | Part # 36146HD | Pressure Plate, C-6/E4OD Forward & Direct Clutch (Top) Flat (.220”) | — |
| 146 | Part # 36146J | Pressure Plate, C-6/E4OD/4R100 Forward Clutch (.250”) (Top) Flat (Powerpack) 1989-Up | — |
| 149 | Part # 36149 | Pressure Plate, C-6/E4OD/4R100 Forward Clutch (Beveled)(Bottom) | 1 |
| 150 | Part # 36150 | Pressure Plate, C-6 Reverse Clutch | — |
| 150 | Part # 36150E | Pressure Plate, E4OD/4R100 Reverse Clutch (.547”) | 1 |
| 152 not on diagram | Part # 36152 | Pressure Plate, E4OD/4R100 Coast Clutch (60 Teeth) Cast Iron Drum | 1 |
| 152 not on diagram | Part # 36152A | Pressure Plate, 4R100 Coast Clutch (32 Teeth) Stamped Steel Drum (1998-Up) | — |
| 447 not on diagram | Part # 36447C | Controller, E4OD Coast Clutch 1989-94 | — |
| 447 not on diagram | Part # 36447CA | Controller, E4OD Coast Clutch 1995-98 | — |
| 545 not on diagram | Part # 36545 | Cylinder, E4OD Intermediate/Overdrive Clutch (For Aluminum Pistons) 1989-95 | — |
| 545 not on diagram | Part # 36545A | Cylinder, E4OD/4R100 Intermediate/Overdrive Clutch(Uses Bonded Overdrive Piston) 96-Up | 1 |
| 741 not on diagram | Part # 44741-5 | Check Ball 250/205C/350/350C Valve Body .250” (Steel) 1969-86 | 2 |
| 853 | Part # 36853 | Cushion, C-6/E4OD Forward Clutch | 1 |
| 854 | Part # 36854 | Cushion, C-6 Reverse Clutch (.062”) L1976-Up | — |
| 854 | Part # 36854A | Cushion, C-6 Reverse Clutch (.085”) 1992-Up | — |
| 854 | Part # 36854EC | Cushion, E4OD Reverse Clutch (.080”) 1996-Up | 1 |
| 907 | Part # 36907 | Piston, C-6 Intermediate Servo (No Dimples)(Fits L Cover) | 1 |
| 907 | Part # 36907A | Piston, C-6 Intermediate Servo (1 Dimple)(Fits N Cover) | 1 |
| 907 | Part # 36907B | Piston, C-6 Intermediate Servo (2 Dimples)(Fits P Cover) | 1 |
| 907 | Part # 36907C | Piston, C-6 Intermediate Servo (3 Dimples)(Fits S Cover) | 1 |
| 907 | Part # 36907D | Piston, C-6 Intermediate Servo (Early) Aluminum (Fits D Cover) | — |
| 907 | Part # 36907E | Piston, E4OD Servo (1st Design) (Uses A Cover # 909) | 1 |
| 960 not on diagram | Part # 36960 | Piston, E4OD Overdrive Clutch 1989-95 | 1 |
| 960 not on diagram | Part # 36960A | Piston, E4OD Overdrive Clutch (Bonded Rubber) 1996-Up | 1 |
| 962 not on diagram | Part # 36962 | Piston, E4OD/4R100 Intermediate Clutch (Aluminum) | 1 |
| 964 | Part # 36964 | Piston, C-6/E4OD Forward Clutch 1976-Up | 1 |
| 965 | Part # 36965 | Piston, C-6 Direct Clutch Piston | 1 |
| 965 | Part # 36965E | Piston, E4OD/4R100 Direct Clutch (Cast # E9TP-7A262-CA) (Used With A Washer Type Direct Drum) 1989-98 | 2 |
| 965 | Part # 36965EA | Piston, E4OD/4R100 Direct Clutch (Cast # YC3P-7A262-AA) (Used With A Bearing Type Direct Drum) 1998-Up | 1 |
| 966 | Part # 36966 | Piston, C-6 Reverse Clutch 1966-E76 | 1 |
| 966 | Part # 36966A | Piston, C-6 Reverse Clutch L1976-E86 | — |
| 966 | Part # 36966B | Piston, C-6 Reverse Clutch L1986-Up | 1 |
| 966 | Part # 36966C | Piston, E4OD Reverse Clutch 1989-98 | 1 |
| 966 | Part # 36966CA | Piston, 4R100 Reverse Clutch 1998-Up | 1 |
| 969 not on diagram | Part # 36969 | Piston, E4OD Coast Clutch (Inner) Aluminum (For Cast Iron Drum) | — |
| 969 not on diagram | Part # 36969B | Piston, 4R100 Coast Clutch (Molded Rubber) (For Stamped Steel Drum) | 1 |
| 974 | Part # 36974A | Spring, C-6 Forward Clutch Disc Spring (.076”) 1966-E76 | 1 |
| 974 | Part # 36974B | Spring, C-6/E4OD Forward Clutch Disc Spring (.094”) L1976-Up | 1 |
| 975 | Part # 36975 | Spring, C-6 Direct Clutch Return 1966-E76 | 1 |
| 975 | Part # 36975A | Springs W/Retainer, C-6 Direct Clutch Return L1976-91 | — |
| 975 | Part # 36975B | Springs W/Retainer, E4OD/4R100 Direct Clutch Return 1989-Up | 1 |
| 976 | Part # 36976 | Springs, C-6 Reverse Clutch Return 1966-E76 | — |
| 976 | Part # 36976A | Springs W/Retainer, C-6 Reverse Clutch Return L1976-E86 | 1 |
| 976 | Part # 36976B | Springs W/Retainer, C-6/E4OD Reverse Clutch Return (3.00”ID)(4.925”OD) L1986-Up | 1 |
| 976 | Part # 36976C | Springs W/Retainer, 4R100 Reverse Clutch Return (3.00”ID)(5.190”OD) 1998-Up | 1 |
| 979 not on diagram | Part # 36979A | Springs W/Retainer, 4R100 Coast Clutch | 1 |
| 991 | Part # 36991A-2 | Detent Spring & Roller, C-6 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 554 | Part # 36554 | Drum, C-6 Forward Clutch (31 Splines, 4 Clutch) 1966-E71 | 1 |
| 554 | Part # 36554A | Drum, C-6 Forward Clutch (31 Splines, 5 Clutch) 1966-E71 | — |
| 554 | Part # 36554B | Drum, C-6 Forward Clutch (31 Splines, 3 Clutch) 1966-E71 | — |
| 554 | Part # 36554C | Drum, C-6 Forward Clutch (30 Splines, 5 Clutch) 1971-E76 | — |
| 554 | Part # 36554D | Drum, C-6 Forward Clutch (30 Splines, 4 Clutch) L1976-Up | — |
| 554 | Part # 36554E | Drum, C-6 Forward Clutch (30 Splines, 4 Clutch) L1971-Up | — |
| 554 | Part # 36554EA | Drum, C-6 Forward Clutch (30 Splines, 3 Clutch) 1971-E76 | — |
| 554 | Part # 36554G | Drum, C-6 Forward Clutch (30 Splines, 5 Clutch) L1976-Up | — |
| 554 | Part # 36554H | Drum, E4OD/4R100 Forward Clutch (4 Clutch) 1989-Up (Spline Length Is The Full Length of The Drum Bore) | — |
| 554 | Part # 36554HA | Drum, E4OD/4R100 Forward Clutch (4 Clutch) 1998-Up (Spline Length Is Only 1/2 The Length Of The Drum Bore)… | 1 |
| 554 | Part # 36554J | Drum, E4OD/4R100 Forward Clutch (3 Clutch) 1989-Up | — |
| 555 | Part # 36555 | Drum, C-6 Direct Clutch (4 Clutch) 1966-Up | — |
| 555 | Part # 36555A | Drum, C-6 Direct Clutch (3 Clutch) 1966-Up | — |
| 555 | Part # 36555AC | Drum, C-6 Direct Clutch (5 Clutch) 1966-Up (This is a 3 Clutch With a New Snap Ring Groove Cut For 5 Clutch) | — |
| 555 | Part # 36555B | Drum, E4OD Direct Clutch (3 Clutch) W/Out Sprag (W/2 Feed Holes) 1989-94 | 1 |
| 555 | Part # 36555BA | Drum, E4OD Direct Clutch (3 Clutch) W/Out Sprag (W/1 Feed Hole) 1995-97 (Uses A Washer # 229) | — |
| 555 | Part # 36555BB | Drum, E4OD/4R100 Direct Clutch (3 Clutch) W/Out Sprag (W/1 Feed Hole)1998-Up (No Longer Uses A Washer # 229) | — |
| 555 | Part # 36555C | Drum, E4OD/4R100 Direct Clutch (4 Clutch) W/Out Sprag (W/2 Feed Holes) 1989-94 | — |
| 555 | Part # 36555CA | Drum, E4OD Direct Clutch (4 Clutch) W/Out Sprag (W/1 Feed Hole) 1995-97 (Uses A Washer # 229) | — |
| 555 | Part # 36555CB | Drum, E4OD/4R100 Direct Clutch (4 Clutch) W/Out Sprag (W/1 Feed Hole) 1998-Up (No Longer Uses A Washer # 229) | — |
| 555 | Part # 36555D | Drum, E4OD/4R100 Direct Clutch (5 Clutch) W/Out Sprag (W/2 Feed Holes) 1989-94 | — |
| 555 | Part # 36555DA | Drum, E4OD Direct Clutch (5 Clutch) W/Out Sprag (W/1 Feed Hole) 1995-97 (Uses A Washer # 229) | — |
| 555 | Part # 36555DB | Drum, E4OD/4R100 Direct Clutch (5 Clutch) W/Out Sprag (W/1 Feed Hole) 1998-Up (No Longer Uses A Washer # 229) | — |
| 555 | Part # 36555E | Drum, 4R100 Direct Clutch (4 Clutch) W/Out Diode 2000-01 (Has 16 Lugs For Mechanical Diode) Can Use 36555CK | — |
| 555 | Part # 36555F | Drum, 4R100 Direct Clutch (5 Clutch) W/Out Diode 2000-01 (Has 16 Lugs For Mechanical Diode) Can Use 36555DK | — |
| 559 not on diagram | Part # 36559 | Drum, E4OD Coast Clutch (W/Out Electronic Pick-Up) Cast Iron (W/Groove For Inner Lip Seal) | 1 |
| 559 not on diagram | Part # 36559A | Drum, E4OD Coast Clutch (W/Out Electronic Pick-Up) Cast Iron (No Inner Lip Seal Groove) Uses Bonded Piston | — |
| 559 not on diagram | Part # 36559B | Drum, E4OD/4R100 Coast Clutch (W/Electronic Pick-Up) Cast Iron | — |
| 559 not on diagram | Part # 36559D | Drum, 4R100 Coast Clutch W/Sun Gear (Stamped Steel) W/Out PTO | 1 |
| 559 not on diagram | Part # 36559E | Drum, 4R100 Coast Clutch (With Sun Gear)(2 Clutch)(Stamped Steel) With PTO | — |
| 559 not on diagram | Part # 36559EA | Drum, 4R100 Coast Clutch (With Sun Gear)(3 Clutch)(Stamped Steel) With PTO | — |
| 576 | Part # 36576 | Clutch Hub, C-6/E4OD Reverse Clutch (W/12 Lugs For Planet) 1966-92 (Has Snap Ring Groove For The Sprag) | 1 |
| 576 | Part # 36576A | Clutch Hub, C-6/E4OD Reverse Clutch (W/12 Lugs For Planet) 1993-97 (No Snap Ring Groove For The Sprag)… | 1 |
| 576 | Part # 36576C | Clutch Hub, E4OD/4R100 Reverse Clutch (W/24 Lugs For Planet) 1998-Up | 1 |
| 580 not on diagram | Part # 36580A | Planet, E4OD Overdrive (3 Gear) Aluminum (1 7/8” Long Hub) 1989-93 | — |
| 580 not on diagram | Part # 36580AA | Planet, E4OD Overdrive (3 Gear) Aluminum (1 7/16” Long Hub) 1994-98 | — |
| 580 not on diagram | Part # 36580AB | Planet, E4OD/4R100 Overdrive (3 Gear) Steel (1 7/16” Long Hub) 1999-Up | 1 |
| 580 not on diagram | Part # 36580B | Planet, E4OD Overdrive (4 Gear) Aluminum (1 7/16” Long Hub) 1994-98 | 1 |
| 580 not on diagram | Part # 36580BA | Planet, E4OD Overdrive (4 Gear) Aluminum (1 7/8” Long Hub) 1989-93 | — |
| 580 not on diagram | Part # 36580BB | Planet, E4OD Overdrive (4 Gear) Steel (1 7/16” Long Hub) 1994-98 (Uses Washer # 214 With Inner Tabs)(Metal & Plastic) | 1 |
| 580 not on diagram | Part # 36580BC | Planet, E4OD Overdrive (4 Gear) Steel (1 7/8” Long Hub) 1989-93 | — |
| 580 not on diagram | Part # 36580BD | Planet, 4R100 Overdrive (4 Gear) Steel (1 7/16” Long Hub) 1999-Up (Uses Washer # 214 With 1 Outer Tab)(Plastic) When… | 1 |
| 582 | Part # 36582 | Planet, C-6 Forward (3 Gear) Aluminum (With 3 Piece Bearing Inside) 1966-E76 | — |
| 582 | Part # 36582A | Planet, C-6 Forward (3 Gear) Aluminum (With 1 Piece Bearing Inside) L1976-Up | — |
| 582 | Part # 36582B | Planet, E4OD Forward (4 Gear) Aluminum (Washer Type) 1989-96 Can Use 36582BA With 36602BA | 1 |
| 582 | Part # 36582BA | Planet, E4OD/4R100 Forward (4 Gear) Aluminum (Bearing Type) 1997-Up | 1 |
| 582 | Part # 36582C | Planet, E4OD Forward (3 Gear) Aluminum (Washer Type) 1989-96 | — |
| 582 | Part # 36582CA | Planet, E4OD/4R100 Forward (3 Gear) Aluminum (Bearing Type) 1997-Up | — |
| 582 | Part # 36582D | Planet, E4OD/4R100 Forward (6 Gear) Steel (Bearing Type) 1997-Up | 1 |
| 584 | Part # 36584 | Planet, C-6 Rear (3 Gear) Aluminum 1966-Up | — |
| 584 | Part # 36584A | Planet, C-6 Rear (4 Gear) Aluminum 1966-Up | — |
| 584 | Part # 36584B | Planet, E4OD Rear (3 Gear) Aluminum (W/12 Lug Hub) 1989-97 | — |
| 584 | Part # 36584C | Planet, E4OD Rear (4 Gear) Aluminum (W/12 Lug Hub) 1989-97 | 1 |
| 584 | Part # 36584CA | Planet, E4OD/4R100 Rear (3 Gear) Aluminum (W/24 Lug Hub) 1998-Up | 1 |
| 584 | Part # 36584CB | Planet, E4OD/4R100 Rear (4 Gear) Aluminum (W/24 Lug Hub) 1998-Up | 1 |
| 584 | Part # 36584CD | Planet, E4OD REar (6 Gear Steel With 12 Lug Hub) 1989-97 | — |
| 584 | Part # 36584D | Planet, E4OD/4R100 Rear (6 Gear) Steel (W/24 Lug Hub) 1998-Up | 1 |
| 590 not on diagram | Part # 36590 | Ring Gear, E4OD Overdrive Planet 1989-97 | 1 |
| 590 not on diagram | Part # 36590A | Ring Gear, 4R100 Overdrive Planet 1998-Up | 1 |
| 592 | Part # 36592 | Ring Gear, C-6 Forward Planet L1967-E76 | — |
| 592 | Part # 36592A | Ring Gear, C-6 Forward Planet L1976-Up | 1 |
| 592 | Part # 36592B | Ring Gear, 5R110W Forward Planet (Small Planet) 2003-04 | 1 |
| 594 | Part # 36594 | Ring Gear, C-6 Rear Planet | — |
| 594 | Part # 36594A | Ring Gear, E4OD/4R100 Rear Planet 1989-Up | 1 |
| 602 | Part # 36602 | Hub, C-6 Forward Planet Ring Gear 1966-E76 | — |
| 602 | Part # 36602A | Hub, C-6 Forward Planet Ring Gear L1976-Up | — |
| 602 | Part # 36602B | Hub, E4OD Forward Planet Ring Gear (Washer Type) 1989-96 | — |
| 602 | Part # 36602BA | Hub, E4OD/4R100 Forward Planet Ring Gear (Bearing Type) 1997-Up | 1 |
| 604 | Part # 36604 | Hub, C-6 Output (2 Tang Washer Type) Long Splines 1966-E67 | — |
| 604 | Part # 36604A | Hub, C-6 Output (2 Tang Washer Type) Short Splines 1966-E67 | — |
| 604 | Part # 36604B | Hub, C-6 Output (3 Tang Washer Type) L1967-87 | — |
| 604 | Part # 36604C | Hub, C-6/E4OD/4R100 Output (Bearing Type) 1988-Up | 1 |
| 610 not on diagram | Part # 36610 | Sun Gear, E4OD/4R100 Overdrive (Used With Cast Iron Drum) 1989-98 | 1 |
| 610 not on diagram | Part # 36610A | Sun Gear, E4OD/4R100 Overdrive (Use With Stamped Steel Drum) 1998-Up… | 1 |
| 612 | Part # 36612 | Sun Gear, C-6 Forward 1966-Up | — |
| 612 | Part # 36612A | Sun Gear, E4OD/4R100 Forward 1989-Up | 1 |
| 622 | Part # 36622 | Shell, C-6 Input 1966-Up | — |
| 622 | Part # 36622B | Shell, E4OD/4R100 Input (Retro Fits Early) 1998-Up | 1 |
| 622 | Part # 36622BA | Shell, E4OD/4R100 Input (Retro Fits Early) 1998-Up (Hardened) | 1 |
| 630 not on diagram | Part # 36630 | Center Support, E4OD/4R100 (Aluminum Plate Only) 1989-Up (These Are Machined & Comes With S36630-2) | 1 |
| 636 not on diagram | Part # 36636 | Support, E4OD Direct Drum (Steel Half) 1989-93 | — |
| 636 not on diagram | Part # 36636B | Support, E4OD Direct Drum (Steel Half) OE Type W/Bearing 1994 | — |
| 636 not on diagram | Part # 36636BA | Support, E4OD/4R100 Direct Drum (With 36630) W/Bearing (OE Type) 1995-Up | 1 |
| 640 not on diagram | Part # 36640B | Sprag Assembly, E4OD Overdrive (34 Lugs) 3 Pieces (Metal Cage) 1989-94 | — |
| 640 not on diagram | Part # 36640BA | Sprag Assembly, E4OD Overdrive (12 Rollers) 3 Pieces (Plastic Cage)(4.080”OD) 1995-Up | 1 |
| 640 not on diagram | Part # 36640C | Sprag Assembly, E4OD Overdrive (12 Lugs) 3 Pieces (4.080”ID #661) 1995-98 (Some) | 1 |
| 640 not on diagram | Part # 36640D | Sprag Assembly, E4OD Overdrive (26 Lugs) 3 Pieces (4.080”ID #661) 1995-98 (Some) | 1 |
| 642 not on diagram | Part # 36642 | Sprag Assembly, E4OD/4R100 Intermediate (34 Lugs) W/Outer Race 1989-Up | — |
| 642 not on diagram | Part # 36642A | Sprag Assembly, E4OD Intermediate (24 Lugs) W/Outer Race | — |
| 642 not on diagram | Part # 36642E | Mechanical Diode, 4R100 Intermediate (W/16 Inner Lugs) 2000-01 (Use 36555CK Or 555DK) | — |
| 650 not on diagram | Part # 36650B | Sprag, E4OD Overdrive (34 Elements) Metal Cage 1989-94 | — |
| 650 not on diagram | Part # 36650BA | Sprag, E4OD Overdrive (12 Rollers) Plastic Cage (4.080”OD) 1995-Up (Can Use 86656A) | 1 |
| 650 not on diagram | Part # 36650BB | Sprag, 4R100 Overdrive (12 Rollers) Plastic Cage 1998-Up (3.313”OD) | 1 |
| 652 not on diagram | Part # 36652 | Sprag, E4OD/4R100 Intermediate (34 Lugs) 1989-Up | — |
| 652 not on diagram | Part # 36652A | Sprag, E4OD Intermediate (24 Lugs) | — |
| 652 not on diagram | Part # 36652B | Sprag, E4OD/4R100 Intermediate (45 Lugs) Heavy Duty 1989-Up | — |
| 654 | Part # 36654A | Sprag, C-6/E4OD Rear (Spring, Retainer, Rollers) 1966-92 | 1 |
| 654 | Part # 36654AK | Sprag, C-6/E4OD Rear (Spring, Retainer, Rollers, Brass Washers) 1966-92 | — |
| 654 | Part # 36654D | Sprag, C-6/E4OD Rear (16 Roller W/Plastic Cage) 1989-4/97 | 1 |
| 654 | Part # 36654E | Sprag, E4OD/4R100 Rear (17 Roller W/Plastic Cage) 5/97-Up | 1 |
| 670 | Part # 36670 | Input Shaft, C-6 (31 Spline Converter End)(31 Spline Drum End) 1966-E71 | — |
| 670 | Part # 36670A | Input Shaft, C-6 (31 Spline Converter End)(30 Spline Drum End) L1971-Up | — |
| 670 | Part # 36670B | Input Shaft, E4OD (14 1/8” Long) | 1 |
| 670 | Part # 36670C | Input Shaft, 5R110W (13 5/8” Long) 2003-Up | 1 |
| 675 not on diagram | Part # 36675 | Shaft, E4OD Overdrive W/Pilot (For Bushing Type Output Shaft) | 1 |
| 675 not on diagram | Part # 36675A | Shaft, E4OD Overdrive W/Pilot (For Bearing Type Output Shaft) | — |
| 675 not on diagram | Part # 36675B | Shaft, E4OD Overdrive (No Pilot)(For Cup Plug Type Output Shaft) 1994 | — |
| 675 not on diagram | Part # 36675BA | Shaft, E4OD/4R100 Overdrive (No Pilot)(For Cup Plug Type Output Shaft) 1995-Up | 1 |
| 678 | Part # 36678 | Output Shaft, C-6 2WD (17 3/8” Long) Bolt On Yoke Type | — |
| 678 | Part # 36678A | Output Shaft, C-6 2WD (23” Long) W/6 Teeth Speed-o Gear | — |
| 678 | Part # 36678AA | Output Shaft, C-6 2WD (23” Long) W/7 Teeth Speed-o Gear | — |
| 678 | Part # 36678AB | Output Shaft, C-6 2WD (23” Long) W/8 Teeth Speed-o Gear | — |
| 678 | Part # 36678AC | Output Shaft, C-6 2WD (23” Long) W/9 Teeth Speed-o Gear | — |
| 678 | Part # 36678B | Output Shaft, C-6 2WD (26 3/4” Long) W/6 Teeth Speed-o Gear | — |
| 678 | Part # 36678BA | Output Shaft, C-6 2WD (26 3/4” Long) W/7 Teeth Speed-o Gear | — |
| 678 | Part # 36678BB | Output Shaft, C-6 2WD (26 3/4” Long) W/8 Teeth Speed-o Gear | — |
| 678 | Part # 36678BC | Output Shaft, C-6 2WD (26 3/4” Long) W/9 Teeth Speed-o Gear | — |
| 678 | Part # 36678C | Output Shaft, C-6 4x4 (15 3/8” Long) | — |
| 678 | Part # 36678D | Output Shaft, C-6 4x4 (18 1/2” Long) | — |
| 678 | Part # 36678E | Output Shaft, E4OD 4x4 (14 3/8” Long) W/Bushing | — |
| 678 | Part # 36678EA | Output Shaft, E4OD 4x4 (14 3/8” Long) W/Bearing | — |
| 678 | Part # 36678EB | Output Shaft, E4OD 4x4 (14 3/8” Long) W/Cup Plug | — |
| 678 | Part # 36678ED | Output Shaft, 4R100 4x4 (14 3/8” Long) W/Cup Plug (Uses A Rotor) | — |
| 678 | Part # 36678G | Output Shaft, E4OD 4x4 (15 3/4” Long) W/Bushing | — |
| 678 | Part # 36678GA | Output Shaft, E4OD 4x4 (15 3/4” Long) W/Bearing | — |
| 678 | Part # 36678GB | Output Shaft, E4OD 4x4 (15 1/2” Long) W/Cup Plug 1994 | — |
| 678 | Part # 36678HA | Output Shaft, E4OD 4x4 (18 1/2” Long) W/Bearing | — |
| 678 | Part # 36678HB | Output Shaft, E4OD 4x4 (18 1/2” Long) W/Cup Plug 1994-Up | — |
| 678 | Part # 36678HC | Output Shaft, 4R100 4x4 (18 1/2” Long) W/Cup Plug (Uses A Rotor) | — |
| 678 | Part # 36678J | Output Shaft, E4OD 2WD (20” Long) W/Bushing (No Speed-o Gear) | — |
| 678 | Part # 36678JA | Output Shaft, E4OD 2WD (20” Long) W/Bearing (No Speed-o Gear) | — |
| 678 | Part # 36678JB | Output Shaft, E4OD/4R100 2WD (20” Long) W/Cup Plug (No Speed-o Gear) | — |
| 678 | Part # 36678JC | Output Shaft, E4OD 2WD (20” Long) W/Bushing ( 7 Teeth Speed-o Gear) | — |
| 678 | Part # 36678JD | Output Shaft, E4OD 2WD (20” Long) W/Bearing ( 7 Teeth Speed-o Gear) | — |
| 678 | Part # 36678JE | Output Shaft, E4OD 2WD (20” Long) W/Cup Plug ( 7 Teeth Speed-o Gear) | — |
| 678 | Part # 36678JF | Output Shaft, 4R100 2WD (20” Long) W/Cup Plug (Uses A Rotor) | — |
| 678 | Part # 36678JG | Output Shaft, E4OD 2WD (20” Long) W/Bushing ( 8 Teeth Speed-o Gear) | — |
| 678 | Part # 36678JH | Output Shaft, E4OD 2WD (20” Long) W/Bearing ( 8 Teeth Speed-o Gear) | — |
| 678 | Part # 36678JJ | Output Shaft, E4OD 2WD (20” Long) W/Cup Plug ( 8 Teeth Speed-o Gear) | — |
| 678 | Part # 36678LA | Output Shaft, E4OD 2WD (23” Long) W/Bearing (No Speed-o Gear) | — |
| 678 | Part # 36678LB | Output Shaft, E4OD 2WD (23” Long) W/Cup Plug (No Speed-o Gear) | — |
| 685 | Part # 36685 | Support, C-6 Governor (With 3 Ring Grooves) | 1 |
| 690 | Part # 36690 | Gear, C-6 Parking | — |
| 690 | Part # 36690A | Gear, E4OD Parking (Washer Type) 1989-98 | 1 |
| 690 | Part # 36690B | Gear, 4R100 Parking (Bearing Type) 1999-Up | — |
| 757 not on diagram | Part # 36757E | Cover, E4OD/4R100 PTO (6 Bolt) | — |
| 760 | Part # 36760A | Case, C-6 360/390 Round Bell (Screw-In Modulator) 1966-72 | — |
| 760 | Part # 36760AA | Case, C-6 360-390 Round Bell (Push-In Modulator) 1972-76 | — |
| 760 | Part # 36760B | Case, C-6 Big Block (Flat Top) (Screw-In Modulator) 1968-72 | — |
| 760 | Part # 36760BA | Case, C-6 Big Block (Flat Top) (Push-In Modulator) 1973-E76 | — |
| 760 | Part # 36760BB | Case, C-6 Big Block (Flat Top) (Push-In Modulator) L1976-E86 (Cast # RF-D7) | 1 |
| 760 | Part # 36760BC | Case, C-6 Big Block (Flat Top) (Push-In Modulator) L1986-Up (Cast # RF-E7) | 1 |
| 760 | Part # 36760BG | Case, C-6 Diesel (Cast # RF-E3) 1983-86 | 2 |
| 760 | Part # 36760BH | Case, C-6 Diesel (Cast # RF-E7) 1987-96 | 1 |
| 760 | Part # 36760C | Case, C-6 Small Block (Screw-In Modulator) 1968-72 | — |
| 760 | Part # 36760CA | Case, C-6 Small Block (Push-In Modulator) 1973-E76 | — |
| 760 | Part # 36760CB | Case, C-6 Small Block (Push-In Modulator) (Cast # RF-D7) L1976-E86 | 1 |
| 760 | Part # 36760CC | Case, C-6 Small Block (Push-In Modulator) (Cast # RF-E7) L1986-Up | 1 |
| 760 | Part # 36760D | Case, E4OD Big Block (W/4 Bath Tub Slots) 1989 | — |
| 760 | Part # 36760DA | Case, E4OD Big Block (W/3 Bath Tub Slots) 1990-97 | — |
| 760 | Part # 36760E | Case, E4OD 5.0L/5.8L (W/4 Bath Tub Slots) 1989 | — |
| 760 | Part # 36760EA | Case, E4OD 5.0L/5.8L (W/3 Bath Tub Slots) 1990-95 | — |
| 760 | Part # 36760EB | Case, E4OD 5.4L/5.8L/6.8L (V10) (W/2 Bath Tub Slots)(3 Bolt Starter) 1996-97 | — |
| 760 | Part # 36760EC | Case, 4R100 5.4L/6.8L (V10) (W/2 Bath Tub Slots)(3 Bolt Starter) W/Turbine Speed Sensor (No PTO) 1998-Up | — |
| 760 | Part # 36760ED | Case, 4R100 5.4L/6.8L (V10) (W/2 Bath Tub Slots)(3 Bolt Starter) W/Turbine Speed Sensor (With PTO) 1998-Up | — |
| 760 | Part # 36760G | Case, E4OD Diesel (W/4 Bath Tub Slots) 1989 | — |
| 760 | Part # 36760GA | Case, E4OD Diesel (W/3 Bath Tub Slots) 1990-95 | — |
| 760 | Part # 36760GB | Case, E4OD Diesel (W/3 Bath Tub Slots) 1996-97 | — |
| 760 | Part # 36760GBA | Case, E4OD Diesel (W/3 Bath Tube Slots) (Cast # RFF7-AA) 1996-97 | 1 |
| 760 | Part # 36760GC | Case, 4R100 7.3L Diesel (W/Out PTO) 1998-Up (W/3 Bath Tub Slots)(W/Turbine Shaft Speed Sensor) | — |
| 760 | Part # 36760GCC | Case, 4R100 7.3L (Diesel)(W/Out PTO) 1998-Up (W/3 Bath Tub SLots)(W/Turbine Shaft Speed Sensor)… | — |
| 760 | Part # 36760GG | Case, 4R100 7.3L Diesel (W/PTO) 1998-Up (W/3 Bath Tub Slots)(W/Turbine Shaft Speed Sensor) | — |
| 770 | Part # 36770 | Extension Housing, C-6 2WD (Aluminum) (All Except Lincoln) | — |
| 770 | Part # 36770A | Extension Housing, C-6 2WD (Aluminum) (Lincoln Only) | — |
| 770 | Part # 36770AA | Extension Housing, C-6 2WD (Bolt On Type Yoke) | — |
| 770 | Part # 36770B | Extension Housing, C-6 4x4 (Aluminum) | — |
| 770 | Part # 36770BA | Extension Housing, C-6 4x4 (8 3/4”)(Cast Iron) | — |
| 770 | Part # 36770BB | Extension Housing, C-6 4x4 (5 3/4”)(Cast Iron) | — |
| 770 | Part # 36770C | Extension Housing, E4OD 2WD 1989-97 | — |
| 770 | Part # 36770D | Extension Housing, E4OD 2WD (For Brake Drum)(Aluminum)(4 5/8”)(Cast # F7TP-7A040-AA) | 1 |
| 770 | Part # 36770DA | Extension Housing, 4R100 2WD (10 1/2”)(3.180”OD Seal) No Sensor | — |
| 770 | Part # 36770DB | Extension Housing, 4R100 2WD (10 1/2”)(3.180”OD Seal ) W/Sensor | — |
| 770 | Part # 36770DC | Extension Housing, 4R100 2WD (10 1/2”)(2 1/2”OD Seal) No Sensor & No Speed-O) 1998-Up | — |
| 770 | Part # 36770DD | Extension Housing, 4R100 2WD (10 1/2”)(2 1/2”OD Seal) w/Sensor Hole On Top 1998-Up | — |
| 770 | Part # 36770DE | Extension Housing, 4R100 2WD (10 1/2”)(2 1/2”OD Seal) No Sensor Hole w/Speed-O Hole 1998-Up | — |
| 770 | Part # 36770E | Extension Housing, E4OD 4x4 (Aluminum) 1989-97 | — |
| 770 | Part # 36770EB | Extension Housing, E4OD/4R100 4x4 (Aluminum) W/Speed Sensor 1998-Up (Cast # RF-F81P) | 1 |
| 770 | Part # 36770EC | Extension Housing, E4OD/4R100 4x4 (Cast Iron) W/Speed Sensor 1998-Up | — |
| 770 | Part # 36770ED | Extension Housing, E4OD/4R100 4x4 (Aluminum) W/Out Speed Sensor 1998-Up | — |
| 774 not on diagram | Part # 36774D | Speed-O Housing, E4OD With Sensor (2 Pin Connector) (2.21 OHMS) 1997-Up (Does Not Use A Cable) | 1 |
| 774 not on diagram | Part # 86774C | Speed-O Housing, AOD/AODE (With 2 Pin Connector)(.871”OD Housing Below O-Ring)(Less Speed-O Driven Gaer)(Uses A Cable) | 1 |
| 909 | Part # 36909 | Cover, C-6 Intermediate Servo (W/Cast Letter L) | — |
| 909 | Part # 36909A | Cover, C-6 Intermediate Servo (W/Cast Letter N) | — |
| 909 | Part # 36909B | Cover, C-6 Intermediate Servo (W/Cast Letter S) | — |
| 909 | Part # 36909C | Cover, C-6 Intermediate Servo (W/Cast Letter P) | — |
| 909 | Part # 36909D | Cover, C-6 Intermediate Servo (W/Cast Letter D) | — |
| 909 | Part # 36909DG | Cover, C-6 Intermediate Servo (W/Cast Letter G) | — |
| 991 | Part # 36991EB-4 | Manual Shaft, 4R100 (5.395” Long)(Threaded On Both Ends) 1998-Up | — |
| 995 | Part # 36995 | Park Pawl Assembly, C-6 | — |
| 995 | Part # 36995E | Park Pawl Assembly, 5R110W 2003-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 162 | Part # 44162 | Hose, 180/180C Modulator (Elbow) 1969-Up | 1 |
| 447 not on diagram | Part # 36447E | Interceptor, E4OD Adjustable Electron Modulator 1989-94 (Allows TCC & Line Pressure To Be Fine Tuned) | 1 |
| 447 not on diagram | Part # 36447EA | Interceptor, E4OD Adjustable Electron Modulator 1995-Up | 1 |
| 447 not on diagram | Part # 36447L | Adaptor, E4OD 1988-92 (For The Rostra LU1) | — |
| 484 not on diagram | Part # 36484E | Orifice Cup Plug, 5R110W Output Shaft (Front) | 1 |
| 495 | Part # 36495 | Pick Up Tube, C-6 4x4 Filter | 1 |
| 582 | Part # 36582-2 | Sleeve, C-6/E4OD/4R100 Forward Planet Repair | 1 |
| 654 | Part # 36654A-3 | Cage And Springs, C-6/E4OD Rear Sprag (No Rollers) 1966-92 | — |
| 697 | Part # 36697 | Oil Distribution Sleeve, C-6 (4 Bolts To Case) | 1 |
| 741 not on diagram | Part # A36741D-3 | Spring, E4OD Reverse Modulator (Fixes 3 Transmissions) (Superior) | — |
| 761 not on diagram | Part # 36761EP-4 | Roll Pin, 5R110W Holds Shift Lever In Case (.113”OD) (1.006” Long) | — |
| 779 not on diagram | Part # S36779 | Pan Bolt, C-4 (Sonnax) | — |
| 779 not on diagram | Part # S36779A | Pan Bolt, A604 (Metric)(Sonnax) | — |
| 783 not on diagram | Part # 36783 | Bolt, 5R110W Center Support To Case (2 Per Pack) 2003-04 | 1 |
| 784 not on diagram | Part # 36784 | Bolt, E4OD Intermediate Clutch Cylinder | 1 |
| 843 | Part # 36843 | Bracket, C-6 Modulator | — |
| 860 not on diagram | Part # 36860 | Snap Ring, 5R110W Holds Overdrive Pressure Plate In Case (.050”) 2003-Up | — |
| 860 not on diagram | Part # 36860A | Snap Ring, 5R110W Holds Overdrive Pressure Plate In Case (.079”) 2003-Up | — |
| 860 not on diagram | Part # 36860B | Snap Ring, 5R110W Holds Overdrive Pressure Plate In Case (.099”) 2003-Up | — |
| 860 not on diagram | Part # 36860C | Snap Ring, 5R110W Holds Overdrive Pressure Plate In Case (.119”) 2003-Up | — |
| 860 not on diagram | Part # 36860D | Snap Ring, 5R110W Holds Overdrive Pressure Plate In Case (.139”) 2003-Up | 1 |
| 862 not on diagram | Part # 36862 | Snap Ring, E4OD Holds Overdrive Return Spring In Drum (Update)(With More Tension) | 1 |
| 863 not on diagram | Part # 36863 | Snap Ring, E4OD Holds Overdrive Sprag In Ring Gear 1989-97 | — |
| 863 not on diagram | Part # 36863A | Snap Ring, 4R100 Holds Overdrive Sprag In Ring Gear 1998-Up | — |
| 864 not on diagram | Part # 36864 | Snap Ring, E4OD Holds Overdrive Sprag To Drum | — |
| 866 not on diagram | Part # 36866 | Snap Ring, E4OD Overdrive Sun Gear Stop | — |
| 868 not on diagram | Part # 36868 | Snap Ring, E4OD Holds Center Shaft In Overdrive Ring Gear 1989-97 | — |
| 868 not on diagram | Part # 36868A | Snap Ring, E4OD/4R100 Holds Center Shaft In Overdrive Ring Gear 1998-Up | 1 |
| 871 not on diagram | Part # 36871 | Snap Ring, E4OD Holds Coast Clutch Beveled Spring In Drum (3 1/16”OD) (.076” Thick) 1989-97 | 1 |
| 871 not on diagram | Part # 36871A | Snap Ring, 5R110W Holds Coast Clutch Beveled Spring In (3 1/4”OD) (.060” Thick) 2003-Up | 1 |
| 878 | Part # 36878 | Snap Ring, 5R110W Coast, Forward & Direct Clutch Pressure Plate (.058”) 2003-Up | 1 |
| 878 | Part # 36878A | Snap Ring, 5R110W Coast, Forward & Direct Clutch Pressure Plate (.067”) 2003-Up | 1 |
| 878 | Part # 36878B | Snap Ring, 5R110W Coast, Forward & Direct Clutch Pressure Plate (.076”) 2003-Up | 1 |
| 878 | Part # 36878C | Snap Ring, 5R110W Coast, Forward & Direct Clutch Pressure Plate (.085”) 2003-Up | — |
| 878 | Part # 36878D | Snap Ring, 5R110W Coast, Forward & Direct Clutch Pressure Plate (.094”) 2003-Up | — |
| 878 | Part # 36878F | Snap Ring, 5R110W Coast, Forward & Direct Clutch Pressure Plate (.112”) 2003-Up | — |
| 879 | Part # 36879 | Snap Ring, 5R110W Holds Retainer In Direct Drum 2003-Up | 1 |
| 881 | Part # 36881 | Snap Ring, 5R110W Holds Forward Clutch Hub In Forward Ring Gear 2003-04 (For Small Planet) | 1 |
| 884 | Part # 36884 | Snap Ring, C-6/E4OD/4R100 Holds Sun Gear To Shell | 1 |
| 888 | Part # 36888 | Snap Ring, C-6/E4OD Holds Rear Planet In Reverse Hub 1966-97 | 1 |
| 888 | Part # 36888A | Snap Ring, C-6/E4OD Holds Rear Planet In Reverse Hub 1998-Up | — |
| 889 | Part # 36889A | Snap Ring, C-6/E4OD Holds Rear Hub To Rear Ring Gear | 1 |
| 890 | Part # 36890 | Snap Ring, C-6/E4OD/4R100 Holds Sprag In Reverse Hub | 1 |
| 892 | Part # 36892 | Snap Ring, 5R110W Holds Low Diode In Case (.075” Thick) 2003-04 | 1 |
| 893 | Part # 36893 | Snap Ring, C-6 Holds Reverse Clutch Spring Retainer In Case 1966-88 | — |
| 894 | Part # 36894A | Snap Ring, C-6 Output Shaft (Front) (.055” Thick) 1966-76 | 1 |
| 894 | Part # 36894B | Snap Ring, C-6/E4OD Output Shaft (Front) (.075” Thick) 1976-Up | 1 |
| 895 | Part # 36895 | Snap Ring, C-6/E4OD Output Shaft (Rear) | 1 |
| 896 not on diagram | Part # 36896 | Snap Ring, E4OD Holds Intermediate Servo In Case | — |
| 906 | Part # 36906 | Spring, C-6 Intermediate Servo | 1 |
| 906 | Part # 36906E | Spring, E4OD Intermediate Servo (1st Design) | — |
| 919 | Part # 36919 | Adjusting Bolt, C-6 Intermediate Band | — |
| 922 | Part # 36922 | Nut, C-6 Band Adjusting Nut | 1 |
| 969 not on diagram | Part # 36969A | Piston Ring, E4OD Coast Clutch (Outer) Steel (For Cast Iron Drum) | — |
| 970 not on diagram | Part # 36970 | Diaphram Spring, E4OD/4R100 Overdrive Clutch 1989-Up | 1 |
| 972 not on diagram | Part # 36972 | Diaphram Spring, E4OD/4R100 Intermediate Clutch 1989-Up | 1 |
| 979 not on diagram | Part # 36979 | Diaphram Spring, E4OD Coast Clutch | 1 |
| 985 | Part # 36985 | Retainer, C-6 Direct Clutch Spring 1966-E76 | — |
| 986 not on diagram | Part # 36986 | Retainer, C-6 Reverse Clutch Spring 1966-E76 | — |
| 991 | Part # 36991 | Linkage Assembly, C-6 W/Park Rod (Internal) 1966-69 | — |
| 991 | Part # 36991-1 | Kickdown Lever, C-6 (Internal) L1976-UP | 1 |
| 991 | Part # 36991-2 | Detent Roller Arm, E4OD | 1 |
| 991 | Part # 36991A | Linkage Assembly, C-6 W/Park Rod (Internal) 1970-UP | — |
| 991 | Part # 36991B | Linkage Assembly, E4OD/4R100 (Internal Park Rod) 1989-Up | — |
| 992 | Part # 36992 | Lever W/Shaft, C-6 Shift (External) Car (Floor Shift) 1966-69 (No Gormmet Type) | — |
| 992 | Part # 36992A | Lever W/Shaft, C-6 Shift (External) Car (Column Shift) 1966-69 (No Grommet Type) | — |
| 992 | Part # 36992AA | Lever W/Shaft, C-6 Shift (External) Truck (Column Shift) 1966-69 (No Grommet Type) | — |
| 992 | Part # 36992AB | Lever W/Shaft, C-6 Shift (External) Car (Floor Shift) 1970-E76 (Uses 3/8” Grommet) | — |
| 992 | Part # 36992AC | Lever W/Shaft, C-6 Shift (External) Car (Column Shift) 1970-E76 (Uses 3/8” Grommet) (Cast # D5UP-AA) | 1 |
| 992 | Part # 36992ACA | Lever W/Shaft, C-6 Shift (External) Car (Column Shift) 1970-E76 (Uses 3/8” Grommet) (Cast # D8TP-AA) | 1 |
| 992 | Part # 36992AD | Lever W/Shaft, C-6 Shift (External) Truck (Column Shift) 1970-E76 (Uses 3/8” Grommet) (Cast # D3TP-CA) | 1 |
| 992 | Part # 36992AE | Lever W/Shaft, C-6 Shift (External) Car (Floor Shift) L1976-Up (Uses 1/2” Grommet) (Cast # D5TP-AA) | 1 |
| 992 | Part # 36992AG | Lever W/Shaft, C-6 Shift (External) Car (Column Shift) L1976-Up (Uses 1/2” Grommet) (Cast # D2AP-AA) | 1 |
| 992 | Part # 36992AGA | Lever W/Shaft, C-6 Shift (External) Car (Column Shift) L1976-Up (Uses 1/2” Grommet) (Cast # E0TP-CA) | 1 |
| 992 | Part # 36992AH | Lever W/Shaft, C-6 Shift (External) Truck (Column Shift) L1976-Up (Uses 1/2” Grommet) | — |
| 992 | Part # 36992B | Lever W/Shaft, E4OD Shift (External) Truck 1989-91 | 1 |
| 992 | Part # 36992BA | Lever W/Shaft, E4OD Shift (External) Truck 1992-98 | 1 |
| 992 | Part # 36992BB | Lever W/Shaft, E4OD Shift (External) Truck 1996-97 (Cast # F75P) | 1 |
| 992 | Part # 36992C | Lever W/Out Shaft, 4R100 Shift (External) Truck (F2UP-BA) 1998-Up | — |
| 994 | Part # 36994E | Park Rod Actuator, 5R110W (10 3/8” Long) 2003-Up | — |
| 995 | Part # 36995E-3 | Spring, E4OD/4R100 Park Pawl Return | — |
| 996 | Part # 26996A | Fitting, C-4/C-5 Cooler Line (Straight) (5/16” Line x 1/8” Pipe Thread) Screw In Flared | — |
| 996 | Part # T86996 | Cooler Line Fitting, E4OD Double O-Ring (Teckpak) 1991-Up | — |
| 999 | Part # 36999A | Tube, C-6 Governor (Long) | 1 |
| 999 | Part # 36999B | Tube, C-6 Governor (Short) | 1 |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.