C4 / C5 parts diagram
Same diagram:
C5
Positions:
144 total, 104 on the diagram
Parts:
358 total, 135 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 26000 | Paper & Rubber Kit, C-4 1964-69 (For 1964 Only Sell One 26320 Also) | — |
| 000 not on diagram | Part # 26000C | Paper & Rubber Kit, C-4 1970-83 | — |
| 000 not on diagram | Part # 26000E | Paper & Rubber Kit, C-5 1982-86 | — |
| 002 not on diagram | Part # 26002 | Overhaul Kit, C-4 1964-69 (For 1964 Only Sell One 26320 Also) | — |
| 002 not on diagram | Part # 26002C | Overhaul Kit, C-4 Combo 1970-83 | — |
| 002 not on diagram | Part # 26002E | Overhaul Kit, C-5 1982-86 | — |
| 004 not on diagram | Part # 26004 | Master L/Steels Kit, C-4 1964-69 (For 1964 Only Sell One 2632 Also) | — |
| 004 not on diagram | Part # 26004C | Master L/Steels Kit, C-4 Combo 1970-83 | — |
| 004 not on diagram | Part # 26004E | Master L/Steels Kit, C-5 1982-86 | — |
| 006 not on diagram | Part # 26006 | Master W/Steels Kit, C-4 1964-69 (For 1964 Only Sell One 26320 Also) | — |
| 006 not on diagram | Part # 26006C | Master W/Steels Kit, C-4 Combo 1970-83 | — |
| 006 not on diagram | Part # 26006E | Master W/Steels Kit, C-5 1982-86 | — |
| 011 not on diagram | Part # 26011 | Filter Kit, C-4 1964 (Cork) | — |
| 011 not on diagram | Part # 26011A | Filter Kit, C-4 1965-69 (Cork) | — |
| 011 not on diagram | Part # 26011B | Filter Kit, C-4 Flat (Shallow Pan) 1970-83 (Cork) | — |
| 011 not on diagram | Part # 26011C | Filter Kit, C-4 W/Hump (Deep Pan) 1974-83 (Cork) | — |
| 011 not on diagram | Part # 26011D | Filter Kit, C-4 Bronco (4x4) 1973-77 (Cork) | — |
| 011 not on diagram | Part # 26011E | Filter Kit, C-5 (2WD) 1982-86 (Cork) | — |
| 011 not on diagram | Part # 26011EA | Filter Kit, C-5 (4x4) 1982-86 (Cork) | — |
| 011 not on diagram | Part # 26011G | Filter Kit, C-4 (Felt) (Flat) Shallow Bottom 1970-83 (Cork) | — |
| 030 not on diagram | Part # 26030 | Bushing Kit, C-4 1964-69 | — |
| 030 not on diagram | Part # 26030B | Bushing Kit, C-4/C-5 1970-86 | — |
| 165 not on diagram | Part # T26165 | Shift Kit, C-4 All 1964 & Early 65 Mustang (Corrects, Reduces Chatter & Spin Up) | — |
| 165 not on diagram | Part # T26165A | Shift Kit, C-4 1965-66 Except 64 1/2 Mustang (Corrects, Reduces Soft Shifts Spin Up 3-2, Long 2-3) | — |
| 165 not on diagram | Part # T26165C | Shift Kit, C-4 1967-69 (6 Cylinder Only) Was T26165B But Now Included In T26165C) | — |
| 165 not on diagram | Part # T26165E | Shift Kit, C-4 1970-72… | — |
| 165 not on diagram | Part # T26165F | Shift Kit, C-4/C-5 1973-Up… | — |
| 169 not on diagram | Part # T26169 | Reprogramming Kit, C-4 1967-69 Automatic Shift, Heavy Duty, Competition / Off Road / Heavy Duty | — |
| 169 not on diagram | Part # T26169A | Reprogramming Kit, C-4 1970-Up Automatic Shift, Heavy Duty, Competion / Off Road / Heavy Duty | — |
| 171 not on diagram | Part # T26171 | Reprogramming Kit, C-4 1967-69 Stick Shift Full Manual Converts Back To Auto C-5 Heavy Duty & | — |
| 171 not on diagram | Part # T26171A | Reprogramming Kit, C-4 1970-Up Stick Shift Full Manual Converts Back To Auto | — |
| 175 not on diagram | Part # 26175 | Ring Kit, C-4 1964-69 | — |
| 175 not on diagram | Part # 26175A | Ring Kit, C-4 1970-77 | — |
| 175 not on diagram | Part # 26175AT | Ring Kit, C-4 1970-77 (Teflon) | — |
| 175 not on diagram | Part # 26175B | Ring Kit, C-4/C-5 1978-86 | — |
| 175 not on diagram | Part # 26175BT | Ring Kit, C-4/C-5 (Teflon) 1978-86 | — |
| 175 not on diagram | Part # 26175C | Ring Kit, C-4/C-5 Combo 1970-86 | — |
| 200 not on diagram | Part # 26200 | Washer Kit, C-4 1964-69 | — |
| 200 not on diagram | Part # 26200C | Washer Kit, C-4/C-5 1970-86 | — |
| 211 | Part # 26211AK | Washer Kit, C-4 Stator To Direct Drum W/Tangs 1967-Up | — |
| 211 | Part # 26211K | Washer Kit, C-4 Stator To Direct Drum W/Out Tangs 1964-66 | — |
| 229 | Part # 26229K | Washer Kit, C-4/C-5 Stator To Forward Drum 1964-86 | — |
| 390 not on diagram | Part # 26390 | External Seal Kit, C-4/C-5 W/Pan Gasket 1966-86 | — |
| 564 not on diagram | Part # 26564 | Piston Kit, C-4 Forward Clutch (2.250”ID) (Cast #C4-AP) 1964-69 | 1 |
| 564 not on diagram | Part # 26564A | Piston Kit, C-4/C-5 Forward Clutch (2.300”ID) (Cast #RF-DO) 1970-Up | — |
| 565 not on diagram | Part # 26565 | Piston Kit, C-4 Direct Clutch (1 Spring Type) 1970-83 | — |
| 565 not on diagram | Part # 26565A | Piston Kit, C-5 Direct Clutch (1 Spring Type) 1982-86 | — |
| 565 not on diagram | Part # 26565AA | Piston Kit, C-4 Direct Clutch (10 Spring Type) 1964-69 | — |
| 654 | Part # 26654AK | Sprag Kit, C-5 Spring & Roller Kit 1982-86 | — |
| 654 | Part # 26654K | Sprag Kit, C-4 Spring & Roller Kit 1964-81 | 1 |
| 905 not on diagram | Part # S26905AA | Servo Assembly. C-4/C-5 Intermediate (Shelby Hi-Performance) Sonnax (Purple Anodized Cover) | — |
| 999 | Part # 26999 | Tube Set, C-4/C-5 Oil | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 160 | Part # 26160 | Modulator, C-4 White Stripes (Screw In) 1964-72 | 1 |
| 160 | Part # 26160A | Modulator, C-4 Dual Red Stripe (Push In) 1973-76 | 1 |
| 160 | Part # 26160B | Modulator, C-4 Single Blue Stripe | 1 |
| 160 | Part # 26160G | Modulator, C-4/C-5 Single Green Stripe (Push In) 1974-86 | 1 |
| 160 | Part # 26160W | Modulator, C-5 Single White Stripe (Push In) 1982-86 | 1 |
| 160 | Part # 26160Y | Modulator, C-4 Single Yellow Stripe (Push In) 1973-83 | 1 |
| 163 | Part # 26163 | Valve, C-4 Under Modulator Pin (.435”OD) (For Screw In Type Modulator) 1966-72 | — |
| 163 | Part # 26163A | Valve, C-4/C-5 Under Modulator Pin (.375”OD) (For Push In Type Modulator) 1972-86 | — |
| 680 | Part # 26680 | Governor, C-4 1964-72 | — |
| 680 | Part # 26680A | Governor, C-4 (Orange Ink Identification) 1973-83 | — |
| 680 | Part # 26680B | Governor, C-5 (Pink/Black Ink Identification) | — |
| 740 not on diagram | Part # 26740 | Valve Body, C-4 (8 Bolt) 1965-66 (Detents On Manual Valve) | — |
| 740 not on diagram | Part # 26740A | Valve Body, C-4 (9 Bolt) 1970-83 | — |
| 740 not on diagram | Part # 26740B | Valve Body, C-4 (9 Bolt) Pinto 1973-83 | — |
| 740 not on diagram | Part # 26740C | Valve Body, C-5 Lock-Up 1982-86 | — |
| 740 not on diagram | Part # 26740D | Valve Body, C-4 (8 Bolt) 1967-69 (Detents On Manual Valve) | — |
| 740 not on diagram | Part # 26740E | Valve Body, C-4 (8 Bolt) 1970 (W/Slider Manual Valve) | — |
| 741 not on diagram | Part # A26741V-5 | Check Ball, C-4/C-5 Valve Body (.212”)(Rubber) | — |
| 741 not on diagram | Part # S26741TK | Boost Valve & Sleeve, C-4/C-5 (Hi-Performance) (Sonnax) | — |
| 747 | Part # 26747 | Plate, C-4 Valve Body Seperator 1970-83 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 not on diagram | Part # 26410 | Switch, C-4 Neutral Safety (With 1 Round 4 Blade Connector) | 2 |
| 410 not on diagram | Part # 26410C | Switch, C-4 Neutral Safety (With 2 Flat 1 Pin/1Hole Connector)(These Are For Australia/New Zealand) | — |
| 414 not on diagram | Part # 26414 | Switch, C-4 Spark Control | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 26010 | Filter, C-4 1964 | 1 |
| 010 | Part # 26010A | Filter, C-4 1965-69 | 1 |
| 010 | Part # 26010B | Filter, C-4 Flat (Shallow Pan) 1970-83 | 1 |
| 010 | Part # 26010C | Filter, C-4 W/Hump (Deep Pan) 1974-83 | 1 |
| 010 | Part # 26010D | Filter, C-4 Bronco (4x4) 1973-77 | 1 |
| 010 | Part # 26010E | Filter, C-5 (2WD) 1982-86 | 1 |
| 010 | Part # 26010EA | Filter, C-5 (4x4) 1982-86 | 1 |
| 010 | Part # 26010G | Filter, C-4 (Felt) (Flat) Shallow Bottom 1970-83 | — |
| 012 | Part # 26012 | Screen, C4/C5 Pump Inlet | — |
| 014 not on diagram | Part # 26014 | Screen, C-4 Governor | 1 |
| 765 | Part # 26765 | Pan, C-4 2WD (Less Filler Tube) (Filler Tube Screws Into Pan) | — |
| 765 | Part # 26765A | Pan, C-4 2WD (1.175” Deep At The Shallow End) (Filler Tube Is In The Case) | — |
| 765 | Part # 26765B | Pan, C-5 Lock-Up 2WD (1.900” Deep At The Shallow End) 1982-86 | — |
| 765 | Part # 26765C | Pan, C-4 4x4 (Has Filler Tube In Case) Flat Bottom | — |
| 765 | Part # 26765D | Pan, C-4 4x4 (W/Hump) (Filler Tube Is In The Case) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 36070 | Seal, AOD Front W/Out Flange | 1 |
| 070 | Part # 36070A | Seal, C-4/C-5 Front (With Flange) | 1 |
| 072 | Part # 36072 | Seal, 5R110W Linkage Shaft 2003-Up | 1 |
| 074 | Part # 26074T | Seal, C-4/C-5 Rear (Large, Truck W/Bolt On Yoke) | — |
| 074 | Part # 44074 | Seal, 180/180C/4L30E Rear 1969-Up | 2 |
| 074 | Part # 44074B | Seal, 250/250C/350/350C Rear (W/Flange, W/Long Boot) 1969-86 | — |
| 074 | Part # 44074C | Seal, 180/180C/4L30E Rear (With Flange) With Short Boot | — |
| 179 | Part # 26179 | Ring, C-4 Direct Clutch (1.750”OD) (.093” Wide) Metal 1964-69 | 1 |
| 179 | Part # 26179A | Ring, C-4/C-5 Direct Clutch (1.800”OD) (.093” Wide) Metal 1970-86 | 1 |
| 181 | Part # 26181 | Ring, C-4 Forward Clutch (1.707”OD) (.093” Wide) Metal 1964-69 | 1 |
| 181 | Part # 26181A | Ring, C-4 Forward Clutch (1.757”OD) (.093” Wide) Metal 1970-77 | 1 |
| 181 | Part # 26181B | Ring, C-4/C-5 Forward Clutch (1.757”OD) (.123” Wide) Metal 1978-86 | 1 |
| 189 | Part # 26189 | Ring, C-4/C-5 Governor (2.687”OD) (.093” Wide) Metal 1964-86 | 1 |
| 189 | Part # 26189T | Ring, C-4/C-5 Governor (2.687”OD) (.093” Wide) Teflon 1964-86 | — |
| 300 | Part # 26300 | Gasket, C-4/C-5 Bottom Pan 1964-86 (Cork) | — |
| 300 | Part # 26300F | Gasket, C-4/C-5 Bottom Pan 1964-86 (Farpak) | — |
| 305 | Part # 26305 | Gasket, C-4/C-5 Extention Housing 1964-86 | 1 |
| 305 | Part # 26305A | Gasket, Extention Housing Bronco 4x4 | — |
| 307 | Part # 26307 | Gasket, C-4/C-5 Front Servo Cover 1964-86 | 1 |
| 310 | Part # 26310 | Gasket, C-4/C-5 Pump 1964-86 | 1 |
| 311 | Part # 26311 | O-Ring, C-4 Pump 1964-65 | 1 |
| 320 | Part # 26320 | Gasket, C-4 Valve Body 1964 | 1 |
| 320 | Part # 26320A | Gasket, C-4 Valve Body 1965-66 | — |
| 320 | Part # 26320B | Gasket, C-4 Valve Body (In Line 6 Cylinder & V6) 1970-83 | 1 |
| 320 | Part # 26320BA | Gasket, C-4 Valve Body (4 Cylinder & V6) 1970-83 | 1 |
| 320 | Part # 26320E | Gasket, C-5 Valve Body 1982-86 | 1 |
| 322 | Part # 26322 | Gasket, C-5 3-2 Timing Body Seperator 1982-86 | 1 |
| 326 | Part # 26326 | Gasket, C-4 Filter (Paper) 1973-83 | 1 |
| 327 not on diagram | Part # 26327 | Gasket, C-4 Modulator To Case (Screw In Type Modulator) | 1 |
| 334 | Part # 26334 | O-Ring, C-4 Forward Clutch Piston Inner 1964-69 | 1 |
| 334 | Part # 26334A | O-Ring, C-4/C-5 Forward Clutch Piston Inner 1970-86 | 1 |
| 335 | Part # 26335 | Lathe Cut Seal, C-4 Forward Clutch Piston Outer 1964-78 | 1 |
| 335 | Part # 26335A | Lip Seal, C-4/C-5 Forward Clutch Piston Outer 1978-86 | 1 |
| 336 | Part # 26336 | O-Ring, C-4 Direct Clutch Piston (Inner) 1964-67 | 1 |
| 336 | Part # 26336A | Lathe Cut Seal, C-4 Direct Clutch Piston (Inner) 1968-69 | 1 |
| 336 | Part # 26336B | Lathe Cut Seal, C-4/C-5 Direct Clutch Piston (Inner) 1970-86 | 1 |
| 337 | Part # 26337 | Lathe Cut Seal, C-4 Direct Clutch Piston (Outer) 1964-5/81 | 1 |
| 337 | Part # 26337A | Lip Seal, C-4/C-5 Direct Clutch Piston (Outer) 6/81-1986 | 1 |
| 346 | Part # 26346 | O-Ring, C-4/C-5 Modulator (Use 36349) | 1 |
| 349 not on diagram | Part # 36349 | O-Ring, C-3/A4LD Throttle Shaft (No Lobes) | 1 |
| 361 | Part # 26361 | Seal, C-4 Intermediate Servo | — |
| 361 | Part # 26361A | Lathe Cut Seal, C-4 Intermediate Servo (Small 1.823”ID) 1965-70 | 1 |
| 361 | Part # 26361AA | Lathe Cut Seal, C-4 Intermediate Servo (Small 1.945”ID) 1965-74 | 1 |
| 361 | Part # 26361AB | Lathe Cut Seal, C-4 Intermediate Servo (Small 2.060”ID) 1964-77 | 1 |
| 361 | Part # 26361AC | Lathe Cut Seal, C-4 Intermediate Servo (Small 2.271”ID) 1964-83 | 1 |
| 361 | Part # 26361AD | O-Ring, C-5 Intermediate Servo (Small 2.237”ID) 1982-86 | 1 |
| 361 | Part # 26361AE | O-Ring, C-5 Intermediate Servo (Small 2.362”ID) 1982-86 | 1 |
| 361 | Part # 26361AG | Lathe Cut Seal, C-4 Intermediate Servo (Small 2.381”ID) 1964-83 | 1 |
| 361 | Part # 26361AH | Lathe Cut Seal, C-4 Intermediate Servo (Small 2.505”ID) 1964-83 | 1 |
| 361 | Part # 26361AJ | O-Ring, C-5 Intermediate Servo (Small 2.550”ID) 1982-86 | 1 |
| 361 | Part # 26361AK | O-Ring, C-5 Intermediate Servo (Small 2.612”ID) 1982-86 | 1 |
| 361 | Part # 26361AL | Lathe Cut Seal, C-4 Intermediate Servo (Small 2.687”ID) 1965-68 | 1 |
| 361 | Part # 26361AM | Lathe Cut Seal, C-4 Intermediate Servo (Small 3.060”ID) 1965-68 | — |
| 361 | Part # 26361B | Lathe Cut Seal, C-4 Intermediate Servo (Large 2.807”ID) 1970-77 | 1 |
| 361 | Part # 26361BA | Lathe Cut Seal, C-4 Intermediate Servo (Large 2.867”ID) 1972-83 | 1 |
| 361 | Part # 26361BB | Lathe Cut Seal, C-4 Intermediate Servo (Large 3.390”ID) 1964-83 | 1 |
| 361 | Part # 26361BC | O-Ring, C-5 Intermediate Servo (Large) (3.487”ID) 1982-86 | 1 |
| 364 | Part # 26364 | Lathe Cut Seal, C-4/C-5 Reverse Servo Cover 1964-86 | 1 |
| 371 | Part # 44371A | Gasket, 010/087/089/090 Filler Tube | 1 |
| 378 not on diagram | Part # 26378 | O-Ring, C-4/C-5 Cooler Lines & Fittings | 1 |
| 385 not on diagram | Part # 26385 | Hockey Puck, C-3 Intermediate Accumulator Check Valve Seal (Rubber) 1964-86 | 1 |
| 385 not on diagram | Part # 56385 | Orifice Puck, A4LD/4R44E/4R55E/4R55E/5R55E Intermediate Accumulator Check Valve Seal (White Plastic) 1985-Up | — |
| 487 not on diagram | Part # 26487 | Grommet, AOD Linkage Grommet (5/16”ID) | 2 |
| 487 not on diagram | Part # 26487A | Grommet, ATX Linkage (5/8”ID) | — |
| 487 not on diagram | Part # 26487B | Grommet, AOD Passing Gear Grommet (Narrow Groove) Green | 1 |
| 487 not on diagram | Part # 26487BA | Grommet, AOD Passing Gear Grommet (Wide Groove) Black | — |
| 487 not on diagram | Part # 26487BW | Grommet, AOD/AODE/4R70W Passing Gear (Narrow Groove) Yellow | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 26034 | Bushing, C-4/C-5 Pump (Babbit) | 1 |
| 034 | Part # 26034A | Bushing, C-4/C-5 Pump (Bronze) | — |
| 036 | Part # 26036 | Bushing, C-4 Front Stator 1964-69 | 1 |
| 036 | Part # 26036A | Bushing, C-4/C-5 Front Stator 1970-86 | 1 |
| 037 | Part # 26037 | Bushing, C-4/C-5 Rear Stator 1970-86 | 1 |
| 037 | Part # 26037A | Bushing, C-4 Rear Stator 1964-69 | 1 |
| 046 | Part # 26046 | Bushing, C-4 Direct Drum 1964-69 | 1 |
| 046 | Part # 26046A | Bushing, C-4/C-5 Direct Drum 1970-86 | 1 |
| 050 | Part # 26050 | Bushing, C-4/C-5 Forward Clutch Hub | 1 |
| 052 | Part # 26052 | Bushing, C-4/C-5 Sun Gear | 1 |
| 061 | Part # 26061 | Bushing, C-4 Reverse Brake Drum (4.527”OD)1964-69 | 1 |
| 064 | Part # 26064 | Bushing, C-4/C-5 Case 1964-86 | 1 |
| 066 | Part # 26066 | Bushing, AOD Extention Housing (1.500”ID) (Babbit) 1980-92 | — |
| 066 | Part # 26066A | Bushing, AOD Extension Housing (1.500”ID) (Bronze) 1980-92 | — |
| 211 | Part # 26211 | Washer, C-4 Stator To Direct Drum W/Out Tangs (.040”) 1964-66 | 1 |
| 211 | Part # 26211A | Washer, C-4 Stator To Direct Drum W/Out Tangs (.055”) 1964-66 | 1 |
| 211 | Part # 26211B | Washer, C-4 Stator To Direct Drum W/Out Tangs (.072”) 1964-66 | 1 |
| 211 | Part # 26211BA | Washer, C-4/C-5 Stator To Direct Drum W/Tangs (.072”) 1966-86 | 1 |
| 211 | Part # 26211C | Washer, C-4/C-5 Stator To Direct Drum W/Out Tangs (.089”) 1966-86 | 1 |
| 211 | Part # 26211CA | Washer, C-4/C-5 Stator To Direct Drum W/Tangs (.089”) 1966-86 | 1 |
| 211 | Part # 26211D | Washer, C-4/C-5 Stator To Direct Drum W/Out Tangs (.106”) 1966-86 | 1 |
| 211 | Part # 26211DA | Washer, C-4/C-5 Stator To Direct Drum W/Tangs (.106”) 1966-86 | 1 |
| 211 | Part # 26211EA | Washer, C-4/C-5 Stator To Direct Drum W/Tangs (.123”) 1966-86 | 1 |
| 211 | Part # 26211GA | Washer, C-4/C-5 Stator To Direct Drum W/Tangs (.140”) 1966-86 | 1 |
| 229 | Part # 26229 | Washer, C-4/C-5 Stator To Forward Drum #1 (.042”) 1964-86 | 1 |
| 229 | Part # 26229A | Washer, C-4/C-5 Stator To Forward Drum #2 (.057”) 1964-86 | 1 |
| 229 | Part # 26229B | Washer, C-4/C-5 Stator To Forward Drum #3 (.074”) 1964-86 | 1 |
| 229 | Part # 26229C | Washer, C-4/C-5 Stator To Forward Drum #4 (.091”) 1964-86 | 1 |
| 229 | Part # 26229D | Washer, C-4/C-5 Stator To Forward Drum #5 (.108”) 1964-86 | 1 |
| 232 | Part # 26232 | Washer, C-4 Forward Drum To Clutch Hub (7 Tabs & 4 Rectangle Holes) 1964-69 | 1 |
| 232 | Part # 26232A | Washer, C-4/C-5 Forward Drum To Clutch Hub (6 Tabs & 3 Round Holes) 1970-86 | 1 |
| 235 | Part # 26235 | Washer, C-4/C-5 Hub To Front Planet | 1 |
| 240 not on diagram | Part # 26240 | Race, C-4/C-5 Front Planet To Sun Gear (Front) Stays In Planet | — |
| 241 not on diagram | Part # 26241 | Bearing, C-4/C-5 Front Planet To Sun Gear (Stays In Planet) | — |
| 242 not on diagram | Part # 26242 | Race, C-4/C-5 Front Planet To Sun Gear (Rear) | — |
| 243 | Part # 26243 | Race, C-4/C-5 Input Shell To Rear Planet | — |
| 244 | Part # 26244 | Washer, C-4 Input Shell To Rear Planet 1964-71 (Use 26235) | 1 |
| 244 | Part # 26244B | Washer, C-4/C-5 Shell To Rear Planet (3 Tabs)(2.150”ID) 1972-86 | 1 |
| 251 | Part # 26251 | Washer, C-4 Rear Planet To Rear Hub & Rear Hub To Reverse Drum (3 Inner Tabs)(2.050”ID) (Can Use 26251A) 1964-79 | 1 |
| 251 | Part # 26251A | Washer, C-4/C-5 Rear Planet To Rear Hub To Rear Hub To Reverse Drum (3 Outer Tabs) (2.050”ID) 1980-86 (Can Use 26251) | 1 |
| 257 | Part # 26257 | Washer, C-4/C-5 Rear Sprag Inner Race To Case (2 Wide ID Tabs & 2 ID Cut-Outs) 1964-69 (Can Use 26257A) | 1 |
| 257 | Part # 26257A | Washer, C-4/C-5 Rear Sprag Inner Race To Case (2 Narrow ID Tabs & No Cut-Outs) 1970-86 | — |
| 263 | Part # 26263 | Washer, C-4/C-5 Case To Parking Gear (Steel)(With 3 Outer Notches)(1.215”ID) 1964-86 | 1 |
| 664 | Part # 26664 | Inner Race, C-4 Sprag 1964-73 | — |
| 664 | Part # 26664A | Inner Race, C-4/C-5 Sprag 1974-86 | — |
| 665 | Part # 26665 | Outer Race, C-4 Sprag 1964-E73 | — |
| 665 | Part # 26665A | Outer Race, C-4/C-5 Sprag L1973-86 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 26022 | Band, C-4/C-5 Intermediate (Flex) 1965-86 | 1 |
| 022 | Part # 26022A | Band, C-4 Intermediate (Rigid) (1.280”) W/Arrow 1964-E65 | — |
| 022 | Part # 26022AA | Band, C-4 Intermediate (Rigid) (1.280”) No Arrow 1964-E65 | — |
| 022 | Part # 26022B | Band, C-4 Intermediate (Rigid) (2.100”) 1965-67 | — |
| 022 | Part # 26022K | Band, C-4/C-5 Intermediate (Flex) 1965-86 Kevlar | — |
| 022 | Part # 26022S | Band, C-4/C-5 Intermediate (Slip-In Or Snap) 1965-86 | 1 |
| 024 | Part # 26024 | Band, C-4/C-5 Reverse (Rear) 1964-86 | 1 |
| 905 not on diagram | Part # 26905 | Servo Assembly, C-4/C-5 Intermediate | — |
| 905 not on diagram | Part # S26905AB | Servo Assembly, C-4/C-5 Intermediate (Shelby Hi-Performance) Sonnax (Non-Anodized Cover) | — |
| 916 | Part # 26916 | Strut Assembly, C-4/C-5 Intermediate Band | — |
| 917 | Part # 26917 | Strut Assembly, C-4/C-5 Reverse (Rear) Band | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 26500 | Pump, C-4 (O-Ring Type) (Uses A No Tang Washer #211) 1964-66 | 1 |
| 500 not on diagram | Part # 26500A | Pump, C-4 (Uses A Washer #211 With Tangs) 1967-69 | — |
| 500 not on diagram | Part # 26500B | Pump, C-4 1970-77 (Can Use 26500C If Customer Has The Wide Rings # 26181B) | 1 |
| 500 not on diagram | Part # 26500C | Pump, C-4 1978-83 | 1 |
| 500 not on diagram | Part # 26500D | Pump, C-5 Lock-Up 1982-86 | 1 |
| 510 not on diagram | Part # 26510 | Pump Body W/Gears, C-4 (O-Ring Type) 1964-66 | — |
| 510 not on diagram | Part # 26510A | Pump Body W/Gears, C-4/C-5 (W/Out O-Ring) 1966-86 | — |
| 520 | Part # 26520 | Stator, C-4 (Uses A Washer #211 With No Tangs) 1964-66 (Uses .790”ID Bushings & .093” Wide Rings #181) | — |
| 520 | Part # 26520A | Stator, C-4 (Uses A Washer #211 With Tangs) 1966-69 (Uses .790”ID Bushings & .093” Wide Rings #181) | 1 |
| 520 | Part # 26520AA | Stator, C-4 1970-77 (Uses .845” Wide Bushings & .093” Wide Rings #181) | — |
| 520 | Part # 26520B | Stator, C-4 (W/Spring) 1978-83 (Uses .845”ID Bushings ^ .123” Wide Rings #181) | 1 |
| 520 | Part # 26520C | Stator, C-5 (W/Out Spring) 1982-86 (Uses .845” ID Bushings & .123” Wide Rings #181) | 1 |
| 530 | Part # 26530 | Pump Gears, C-4/C-5 | 1 |
| 530 | Part # 26530X | Pump Gears, C-4/C-5 (Oversized) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 106 | Part # 26106 | Friction, C-4/C-5 Direct Clutch (.078”) (Waffle) 1965-86 | 1 |
| 106 | Part # 26106A | Friction, C-4 Direct Clutch (.093”) (Waffle) 1964-65 | 1 |
| 106 | Part # 26106G | Friction, C-4/C-5 Direct Clutch (.078”) (Parallel Grooves) 1981-86 | 1 |
| 106 | Part # 26106HD | Friction, C-4/C-5 Direct Clutch (.078”) (Heavy Duty) 1965-86 | — |
| 106 | Part # 26106HP | Friction, C-4/C-5 Direct Clutch (.078”) (Hi Performance) 1965-86 | — |
| 108 | Part # 26108 | Friction, C-4/C-5 Forward Clutch (.061”) (Smooth) 1964-86 | — |
| 108 | Part # 26108HD | Friction, C-4/C-5 Forward Clutch (.061”) (Heavy Duty) 1964-86 | — |
| 108 | Part # 26108HP | Friction, C-4/C-5 Forward Clutch (.061”) (Hi Performance) 1964-86 | — |
| 108 | Part # 26108S1 | Friction, C-4/C-5 Forward Clkutch (.061”) (Smooth) (Stage 1) 1964-86 (Also Fits C-4/C-5 Direct Clutch 1964-86) | — |
| 119 not on diagram | Part # 26119 | Friction Module, C-4/C-5 1964-Up | — |
| 119 not on diagram | Part # 26119AHP | Friction Module, C-4/C-5 (Hi Performance) Indy Reds 1964-Up | — |
| 119 not on diagram | Part # 26119HP | Friction Module, C-4/C-5 (Hi-Performance) Blue Plates 1964-Up | — |
| 126 | Part # 26126 | Steel, C-4 Forward & Direct Clutch (C-5 Forward) (.078”Thk)(26 Teeth)(4.780”OD) 1964-86 | — |
| 126 | Part # 26126A | Steel, C-4 Forward Clutch 1964-67 | — |
| 126 | Part # 26126B | Steel, C-4 Forward & Direct Clutch (C-5 Forward) (.078”) 1964-86 (Kolene) | — |
| 126 | Part # 26126C | Steel, C-4/C-5 Direct Clutch (.060”) (Thin) 1964-86 | — |
| 126 | Part # 26126E | Steel, C-5 Direct Clutch (.090”) 1982-86 | — |
| 126 | Part # 26126X | Steel, C-4/C-5 Forward & Direct Clutch (.095”) Oversized 1964-86 | — |
| 139 not on diagram | Part # 26139 | Steel Module, C-4 1964-83 | — |
| 139 not on diagram | Part # 26139E | Steel Module, C-5 1982-86 | — |
| 146 | Part # 26146 | Pressure Plate, C-4/C-5 Forward & Direct Clutch (Top)(.220”)(28 Teeth)(3.573”ID) | — |
| 146 | Part # 26146A | Pressure Plate, C-4/C-5 Forward & Direct Clutch (Top)(.141”)(28 Teeth)(3.573”ID) | 1 |
| 146 | Part # 26146B | Pressure Plate, C-4/C-5 Forward & Direct Clutch (.297”) Top | 1 |
| 149 | Part # 26149 | Pressure Plate, C-4/C-5 Forward Clutch (.267”) Bottom | — |
| 149 | Part # 26149A | Pressure Plate, C-4/C-5 Forward Clutch (.313”) Bottom | 1 |
| 907 | Part # 26907 | Piston, C-4/C-5 Intermediate Servo | — |
| 912 | Part # 26912 | Piston, C-4/C-5 Reverse Servo | 1 |
| 964 | Part # 26964 | Piston, C-4/C-5 Forward Clutch | — |
| 965 | Part # 26965 | Piston, C-4/C-5 Direct Clutch | — |
| 974 | Part # 26974 | Spring, C-4/C-5 Forward Clutch Return | 1 |
| 975 | Part # 26975 | Spring, C-4/C-5 Direct Clutch Return (10 Springs) 1964-69 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 554 | Part # 26554 | Drum, C-4 Forward (4 Clutch) (24 Spline) 1964-69 | — |
| 554 | Part # 26554A | Drum, C-4 Forward (5 Clutch) (24 Spline) 1964-69 | — |
| 554 | Part # 26554AC | Drum, C-4 Forward Clutch (5 Clutch) (26 Spline) 1970 Only | 1 |
| 554 | Part # 26554AE | Drum, C-4 Forward Clutch (5 Clutch) (24 Spline) 1971-80 | 1 |
| 554 | Part # 26554B | Drum, C-4/C-5 Forward Clutch (5 Clutch) (24 Spline) 1981-86 | 1 |
| 555 | Part # 26555A | Drum, C-4 Direct Clutch (4 Clutch) (2 7/16” Tall) 1964 Only | — |
| 555 | Part # 26555AA | Drum, C-4 Direct Clutch (4 Clutch) (2 11/16” Tall) 1964-69 | — |
| 555 | Part # 26555B | Drum, C-4 Direct Clutch (4 Clutch) 1970-81 | — |
| 555 | Part # 26555C | Drum, C-5 Direct Clutch (3 Clutch) 1982-86 | — |
| 556 | Part # 26556 | Drum, C-4/C-5 Reverse (Rear Band Drum) 1964-86 | — |
| 574 | Part # 26574 | Hub, C-4 Forward Clutch (W/Out Bushing) 1964 | — |
| 574 | Part # 26574A | Clutch Hub, C-4 Forward Clutch 1965-80 | — |
| 574 | Part # 26574B | Hub, C-4/C-5 Forward Clutch 1981-86 | — |
| 582 not on diagram | Part # 26582 | Planet, C-4 Front (Uses A 3 Piece Bearing Inside) 1964-83 | — |
| 582 not on diagram | Part # 26582A | Planet, C-5 Front (Uses A 1 Piece Bearing Inside) 1982-86 | — |
| 584 | Part # 26584 | Planet, C-4/C-5 Rear 1964-86 | — |
| 592 | Part # 26592 | Ring Gear, C-4/C-5 Front & Rear Planet 1964-86 | — |
| 604 | Part # 26604 | Hub, C-4/C-5 Output Shaft 1964-86 | — |
| 612 not on diagram | Part # 26612 | Sun Gear, C-4 W/Small Lube Holes 1964-80 | — |
| 612 not on diagram | Part # 26612A | Sun Gear, C-4/C-5 W/large Lube Holes 1981-86 | — |
| 622 | Part # 26622 | Shell, C-4/C-5 Primary Sun Gear 1965-86 | — |
| 670 | Part # 26670 | Input Shaft, C-4 (24 & 24 Spline) 1964-69 | — |
| 670 | Part # 26670A | Input Shaft, C-4 (26 & 26 Spline) 1970 Only | — |
| 670 | Part # 26670B | Input Shaft, C-4/C-5 (26 & 24 Spline) 1974-86 | — |
| 678 | Part # 26678 | Output Shaft, C-4/C-5 2WD (7 Teeth Speed-O Gear) | — |
| 678 | Part # 26678A | Output Shaft, C-4/C-5 2WD (8 Teeth Speed-O Gear) | — |
| 678 | Part # 26678AB | Output Shaft, C-4/C-5 (8 Teeth Speed-O Gear) 1965-Up | — |
| 678 | Part # 26678B | Output Shaft, C-4/C-5 (9 Teeth Speed-O Gear) 1965-Up | — |
| 678 | Part # 26678C | Output Shaft, C-4/C-5 (Bolt On Yoke Type) | — |
| 678 | Part # 26678D | Output Shaft, C-4 4x4 (12” Long) | — |
| 678 | Part # 26678E | Output Shaft, C-4/C-5 4x4 (13 1/4” Long) | — |
| 685 | Part # 26685 | Support, C-4/C-5 Governor | — |
| 690 | Part # 26690 | Gear, C-4/C-5 Parking | — |
| 750 | Part # 26750AC | Bell Housing, C-4 (4 Cylinder) Top Bolts 5 1/8” (3 Bolt Starter) Bolts To Pump | — |
| 750 | Part # 26750AD | Bell Housing, C-4 (4 Cylinder) Top Bolts 4 3/4” (3 Bolt Starter At 11:00) Cast #D8BP 7976AA (Bolts To Pump) | 1 |
| 750 | Part # 26750BD | Bell Housing, C-4 (V-6) Top Bolts 3 1/2” (Bolts To Pump) | — |
| 750 | Part # 26750CA | Bell Housing, C-4 (302) With 10 3/4” Converter (W/Out Cable Mount Holes) Bolts To Pump | — |
| 750 | Part # 26750CB | Bell Housing, C-4 (302) With 11 3/4” Converter (W/Cable Mount Holes) Bolts To Pump | — |
| 750 | Part # 26750CC | Bell Housing, C-4 (302) With 12 3/4” Converter (W/Cable Mount Holes) Bolts To Pump | — |
| 750 | Part # 26750CD | Bell Housing, C-4 (302) With 12 3/4” Converter (W/Out Cable Mount Holes) Bolts To Pump | — |
| 750 | Part # 26750CE | Bell Housing, C-4 (302) With 12 3/4” Converter (W/Cable Mount Holes) Bolts To Case | — |
| 750 | Part # 26750CF | Bell Housing, C-4 (302) With 12 3/4” Converter (W/Out Cable Mount Holes) Bolts To Case | — |
| 750 | Part # 26750D | Bell Housing, C-4 (460 Big Block) Bolts To Case | — |
| 750 | Part # 26750EA | Bell Housing, C-5 (Top Bolts 5”) (W/Cable Mount Holes) Bolts To Pump 1982-86 | — |
| 750 | Part # 26750EB | Bell Housing, C-5 (Top Bolts 5”) (W/Out Cable Mount Holes) Bolts To Pump 1982-86 | — |
| 750 | Part # 26750EC | Bell Housing, C-5 (Top Bolts 5”) (With Cable Mount Holes) Bolts To Case 1982-86 | — |
| 750 | Part # 26750EG | Bell Housing, C-5 (Top Bolts 7”) Bolts To Pump 1982-86 | — |
| 760 | Part # 26760 | Case, C-4 (Screw In Modulator) Bell Bolts To Pump 1964-66 (Uses A Pump Body With O-Ring) | — |
| 760 | Part # 26760A | Case, C-4 (Screw In Modulator) Bell Bolts To Pump 1966-72 (Uses A Pump Body With No O-Ring) | — |
| 760 | Part # 26760AC | Case, C-4 Screw In Modulator) Bell Bolts To Case 1966-72 (Humpback Case) (Uses A Pump Body With No O-ring) | — |
| 760 | Part # 26760B | Case, C-4 (Push In Modulator) Bell Bolts To Pump 1972-83 | — |
| 760 | Part # 26760C | Case, C-4 (Push In Modulator) Bell Bolts To Case 1972-83 (Humpback Case) | — |
| 760 | Part # 26760D | Case, C-4/C-5 (Push In Modulator) Bell Bolts To Pump 1982-86 (Fine Thread Band Adjustment) | — |
| 760 | Part # 26760E | Case, C-4/C-5 (Push In Modulator) Bell Bolts To Case 1982-86 (Fine Thread Band Adjustment) | — |
| 770 | Part # 26770 | Extension Housing, C-4/C-5 2WD (Car) W/Vent 1970-Up | — |
| 770 | Part # 26770A | Extension Housing, C-4/C-5 (Truck, Bolt-On Type Yoke) 1970-86 | — |
| 770 | Part # 26770B | Extension Houisng, C-4/C-5 4x4 (6 3/4” Aluminum) | — |
| 770 | Part # 26770C | Extension Houisng, C-4 2WD (No Vent) 1964-69 | — |
| 909 | Part # 26909 | Cover, C-4/C-5 Intermediate Servo | — |
| 914 | Part # 26914 | Cover, C-4/C-5 Reverse (Rear) Servo | — |
| 995 not on diagram | Part # 26995 | Park Pawl Assembly, C-4/C-5 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 162 | Part # 44162 | Hose, 180/180C Modulator (Elbow) 1969-Up | 1 |
| 164 not on diagram | Part # 26164 | Modulator Pin, C-4/C-5 (1 5/8” Long) | — |
| 487 not on diagram | Part # 26487C | E-Clip, C-3/A4LD Linkage | — |
| 697 | Part # 26697 | Oil Distribution Sleeve, C-4/C-5 1970-86 | — |
| 741 not on diagram | Part # 26741-1K | Check Valve & Spring, C-4 (Under Filter) | 1 |
| 746 | Part # 26746 | Plate, C-5 Lock-Up 1982-86 | — |
| 775 not on diagram | Part # 26775 | Converter Nut, 5R55N/5R55S/5R55W Flange Type (Standard Thread) | — |
| 775 not on diagram | Part # 26775A | Converter Nut, AOD/AODE Self Locking (Standard Thread) | — |
| 775 not on diagram | Part # 26775C | Converter Plug, C-4/C-5 Allen Head | — |
| 775 not on diagram | Part # 26775D | Converter Plug, C-4/C-5 7/16” Hex Head | — |
| 779 | Part # S36779 | Pan Bolt, C-4 (Sonnax) | — |
| 797 not on diagram | Part # 26797 | Nut, C-4/C-5 Holds On Detent Lever | — |
| 843 | Part # 26843 | Bracket, C-4/C-5 Modulator | — |
| 877 | Part # 26877 | Snap Ring, C-4/C-5 Holds Forward Clutch Return Spring In (.082” Thick)(5”OD) | — |
| 878 | Part # 26878 | Snap Ring, C-4/C-5 Forward & Direct Clutch (.060”-.066”) | — |
| 878 | Part # 26878A | Snap Ring, C-4/C-5 Forward & Direct Clutch (.070”-.080”) | — |
| 878 | Part # 26878B | Snap Ring, C-4/C-5 Forward & Direct Clutch (.088”-.094”) | — |
| 878 | Part # 26878C | Snap Ring, C-4/C-5 Forward & Direct Clutch (.102”-.106”) | — |
| 879 | Part # 26879 | Snap Ring, C-4/C-5 Holds Direct Clutch Retainer In | — |
| 881 | Part # 26881 | Snap Ring, C-4/C-5 Holds Forward Clutch Hub To Front Ring Gear & Gear | — |
| 884 | Part # 26884 | Snap Ring, C-4/C-5 Holds Bowl To Sun Gear | — |
| 894 | Part # 26894 | Snap Ring, C-4/C-5 Holds Rear Hub To Output Shaft (Wire Type) (Can Use 26895) | — |
| 895 | Part # 26895 | Snap Ring, C-4/C-5 Holds Governor Support To Output Shaft (.050” Thick With 2 Eyelets) | — |
| 906 | Part # 26906 | Spring, C-4/C-5 Intermediate Servo Return | — |
| 911 | Part # 26911 | Spring, C-4/C-5 Reverse Servo | — |
| 919 | Part # 26919 | Bolt, C-4 Band Adjusting (Coarse Thread) 1964-81 | — |
| 919 | Part # 26919A | Bolt, C-4/C-5 Band Adjusting (Fine Thread) 1982-86 | — |
| 922 | Part # 26922 | Nut, C-3/A4LD/4R44E/4R55E/5R55E Band Adjustment Nut (Coarse Threads) | 1 |
| 922 | Part # 26922A | Nut, C-4/C-5 Band Adjustment (Fine Thread) 1982-86 | 1 |
| 985 | Part # 26985 | Retainer, C-4/C-5 Direct Clutch Spring | — |
| 989 | Part # 26989 | Retainer, C-4 Sprag (W/Out Springs) 1964-81 | 1 |
| 989 | Part # 26989A | Retainer, C-5 Sprag (With Snap On Springs) 1982-86 | — |
| 991 not on diagram | Part # 26991 | Linkage Assembly, C-4/C-5 Internal (Without Detent Spring) 1970-Up | — |
| 991 not on diagram | Part # 26991-1 | Kickdown Lever, C-4 (Internal) 1970-Up | — |
| 996 | Part # 26996 | Fitting, C-4/C-5 Cooler Line (90 Degree Elbow) (5/16” Line x 1/8” Pipe Thread) Screw In Flared | 1 |
| 996 | Part # 26996A | Fitting, C-4/C-5 Cooler Line (Straight) (5/16” Line x 1/8” Pipe Thread) Screw In Flared | — |
| 997 not on diagram | Part # 26997 | Lever, C-4/C-5 Detent | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.