40TE / 40TES parts diagram
Same diagram:
40TES
Transmission page:
Positions:
189 total, 147 on the diagram
Parts:
417 total, 218 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 92000 | Paper & Rubber Kit, A604 1989-Up | — |
| 002 not on diagram | Part # 92002 | Overhaul Kit, A604 1989-03 (For Bonded Underdrive Piston Sell # 92960)(For AWD Sell Two 32074A Also) | 1 |
| 002 not on diagram | Part # 92002A | Overhaul Kit, A604 (For Bonded Pistons Sell # 92960CK For 40TE Or #92960DK For 41TE) (For AWD Sell Two 32074A Also) | — |
| 004 not on diagram | Part # 92004A | Master L/Steels Kit, A604 1990-03 (For Bonded Underdrive Piston Sell 92960)(For AWD Sell Two 32074A Also) | — |
| 004 not on diagram | Part # 92004B | Master L/Steels Kit, A604 1990-03 (W/Hi-Energy Frictions) (For Bonded Underdrive Piston Sell #92960)… | 1 |
| 004 not on diagram | Part # 92004C | Master L/Steels Kit, A604 2004-Up (For Bonded Pistons Sell #92960CK For 40TE Or Sell #92960DK For 41TE)… | — |
| 006 not on diagram | Part # 92006B | Master W/Steels Kit, A604 1990-03 (W/Hi-Energy Frictions) (For Bonded Underdrive Piston Sell #92960)… | — |
| 006 not on diagram | Part # 92006C | Master W/Steels Kit, A604 2004-Up (For Bonded Pistons Sell #92960CK For 40TE Or Sell #92960DK For 41TE)… | — |
| 011 not on diagram | Part # 92011 | Filter Kit, A604 1989-Up | — |
| 030 not on diagram | Part # 92030 | Bushing Kit, A604 1989-95 | — |
| 030 not on diagram | Part # 92030A | Bushing Kit, 42RLE 2003-Up (For 2001-Up Sell 92047A Also) | — |
| 100 | Part # A92100BPPK | Fiction/Steel Kit, 42RLE Overdrive Clutch (.073”)(Hi-Energy) 2003-Up | — |
| 167 not on diagram | Part # T92167 | Shift Kit, 42RLE 1989-Up (Transgo) | — |
| 175 not on diagram | Part # 92175 | Ring Kit, A604 1989-Up (With Selectives) (6 Pieces Total) | — |
| 181 | Part # 92181TK | Ring Kit, 4L80E Center Support (4 Rings Per Kit)(Teflon) 1991-Up | 1 |
| 191 | Part # 92191K | Ring Kit, 42RLE (8 Accumulator & 4 Stator Rings) 2003-Up | — |
| 200 not on diagram | Part # 92200 | Washer Kit, A604 (With Selectives) (7 Pieces) 1989-Up | — |
| 201 not on diagram | Part # 92201A | Bearing Kit, A604 1988-Up (Torrington) | — |
| 220 | Part # 92220K | Washer Set, 62TE Underdrive Hub To Overdrive Hub (Contains:92220 & 92221) 2007-Up | 1 |
| 251 | Part # 92251K | Bearing & Race Kit, A604 Presses On Rear Planet 1989-Up (Use 32274K) | — |
| 274 | Part # 32274K | Bearing & Race Kit, A404/413/470/670 Differential/Pinion/Both Transfer Gears (22 Rollers) | — |
| 274 | Part # 92274K | Bearing & Race Kit, A604 Differential / Pinion (20 Roller) (1.500”ID) | 1 |
| 276 | Part # S92276AK | Shim Kit, A604 (.005”) (10 Piece) (Use W/OE Shims) Sonnax | 1 |
| 276 | Part # S92276BK | Shim Kit, A604 (.030”) (10 Piece) (Use W/OE Shims) Sonnax | 1 |
| 276 | Part # S92276CK | Shim Kit, A604 (.037”) (10 Piece) (Use W/OE Shims) Sonnax | 1 |
| 276 | Part # S92276DK | Shim Kit, A604 (.045”) (10 Piece) (Use W/OE Shims) Sonnax | 1 |
| 281 | Part # 92281K | Bearing & Race Kit, A604 Driven Transfer Gear To Case | — |
| 290 | Part # S92290AK | Shim Kit, A404/413/470/670 Differential Bearing Race (.005”)(Fits Small Cup Race 2.480”OD) (10 Per Kit) Sonnax | 1 |
| 290 | Part # S92290BK | Shim Kit, A404/413/470/670 Differential Bearing Race (.005”)(Fits Large Cup Race 2.880”OD) (10 Per Kit) Sonnax | — |
| 329 | Part # S92329AK | Gasket / Seal Kit, A604 Low/Reverse Piston Retainer (Sonnax) Steel Gasket W/Rubber Grommet | — |
| 376 | Part # S92376DK | Diaphragm Kit, A604 Switch Seal Kit (In Solenoid Pack) (3 Diaphragms, 3 Brass Contacts) Sonnax | — |
| 424 not on diagram | Part # 92424 | Repair Kit, A604 Solenoid Pack 1989-98 (92328A Is The Gasket For 1999-Up For This Kit) | — |
| 424 not on diagram | Part # 92424A | Repair Kit, A604 Solenoid Pack 1999-Up | — |
| 445 not on diagram | Part # 92445BK | Repair Kit, A604 Wire Harness (PRNDL / Neutral Switch) | 1 |
| 445 not on diagram | Part # 92445CK | Repair Kit, A604 Wire Harness (Input / Output Speed Sensor Connector) (W/Heat Shrinks) | 1 |
| 445 not on diagram | Part # 92445DK | Repair Kit, A604 Wire Harness (Solenoid Connector) | 1 |
| 554 | Part # 92554AK | Drum Kit, A604 Input Clutch Retainer (W/Out Bevel) 1990-96 (Contains: # 860, 876 & (2) # 142) | 1 |
| 560 not on diagram | Part # 92560 | Piston Kit, A604 Overdrive/Reverse Clutch (Contains Snap Ring & Spring) 1989 | — |
| 564 not on diagram | Part # 92564 | Piston Kit, 42RLE Underdrive Clutch 2003-Up | — |
| 567 not on diagram | Part # 92567 | Piston Kit, A604 Low/Reverse Clutch (Piston/Spring/Snap Ring) 1989-Up | — |
| 568 not on diagram | Part # 92568 | Piston Kit, 42RLE 2-4 Clutch (Contains #630, 968, 978) | 1 |
| 568 not on diagram | Part # 92568A | Piston Kit, 42RLE 2-4 Clutch (Contains #630A, 968D, 978)(#630 Has A Locking Tab At 6:00 And A Feed Hole At 6:00) | — |
| 570 | Part # 92570K | Clutch Hub Kit, A604 Overdrive & Reverse (1.160”OD Shaft)(Contains: 2-4 Hub & Front Planet) 1996-Up (Retro Fits To… | — |
| 583 not on diagram | Part # 92583 | Planet Kit, A604 (Contains: Front Planet, Rear Planet, 2-4 Hub, Sun Gear, Ring Gear) 1989-E91 Rear Planet Is 4 Gear And… | — |
| 583 not on diagram | Part # 92583A | Planet Kit, A604 (Contains: Front Planet, Rear Planet, 2-4 Hub, Overdrive Hub, Sun Gear, Ring Gear) L1991-Up… | — |
| 583 not on diagram | Part # 92583B | Planet Kit, A604 (Contains: Front Planet, Rear Planet, 2-4 Hub, Overdrive Hub, Sun Gear, Ring Gear) 1996-Up… | — |
| 630 | Part # 92630AK | Retainer Kit, A604 2nd-4th Clutch Piston (Contains: # 92630 & A Bonded Piston # 92968) | 1 |
| 630 | Part # 92630K | Retainer Kit, A604 2nd-4th Clutch Piston… | 1 |
| 717 not on diagram | Part # 32717BK | Gear Kit, A604 (12 Bolt) Side & Spider Gears W/Washers & Pins) | — |
| 741 not on diagram | Part # S92741PCK | Sure Cure Kit, A604 (Sonnax) | — |
| 741 not on diagram | Part # S92741PK | Valve Kit, 45RFE/5-45RFE/68RFE Converter Regulator (2 Valves)(Sonnax) | 1 |
| 761 not on diagram | Part # 92761CD | Case Kit, A604 (Converts 1991-94 3.3 & 3.8 Liter To 1996-98) Case Must Be Machined For The Tapered Case Connector… | — |
| 761 not on diagram | Part # 92761CE | Case Kit, A604 (Converts 1991-94 3.3 & 3.8 Liter To 1999-Up) Case Must Be Machined For The Tapered Case Connector… | — |
| 774 | Part # 92774BK | Repair Kit, A604 Speed-O Housing (VSS) (3 Prong W/Connector) (Includes: Speed-O Housing, Connector W/8” Wires To… | — |
| 777 not on diagram | Part # 92777K | Bolt Set, 42RLE Pump To Case (5 Pieces) 2003-Up | — |
| 778 not on diagram | Part # 92778K | Bolt Set, 42RLE Pump Body To Stator (6 Pieces) 2003-Up | — |
| 779 | Part # 92779K | Bolt Set, A604 Bottom Pan To Case (10mm)(14 Pieces) | — |
| 780 | Part # 92780K | Bolt Set, A604 Transfer Gear Cover To Case (10mm) (10 Pieces) (Can Use 92779K) | — |
| 781 | Part # 92781K | Bolt Set, A604 Extension Housing To Case (13mm X 1 1/2” Long) (4 Pieces) | — |
| 782 not on diagram | Part # 92782K | Bolt Set A604 Valve Body To Case (10mm) (18 Pieces) | — |
| 785 | Part # 92785K | Bolt Set, A604 Differential Cover To Case (10mm) (12 Pieces) (Can Use 92779K) | — |
| 786 | Part # 92786K | Bolt Set, A604 Differential To Ring Gear | — |
| 792 | Part # 92792K | Bolt Set, A604 External Solenoid To Case (10mm) (3 Pieces) | — |
| 793 | Part # 92793K | Bolt Set, A604 Differential Retainer To Case (13mm X 1 1/8” Long) (6 Pieces) | — |
| 937 | Part # 92937HDK | Piston Kit, A604 Overdrive Accumulator (Aluminum) With Rubber O-Rings (Southeast)… | — |
| 937 | Part # 92937K | Piston KIt, A606 Overdrive Accumulator With Rings 1989-Up (Also Fits 2-4 Accumulator and Underdrive Accumulator) | — |
| 937 | Part # S92937-1K | Sleeve Kit, 42RLE Overdrive, 2-4, Low/Reverse, Underdrive Accumulator 1989-03 (Sonnax)… | — |
| 937 | Part # S92937K | Sleeve Kit, 42RLE Overdrive, 2-4, Low/Reverse, Underdrive Accumulator 1989-03 (Sonnax)… | — |
| 960 | Part # 92960CK | Piston Kit, A604 (40TE) (Contains: # 960, 967C, 968C) 2004-Up | — |
| 960 | Part # 92960DK | Piston Kit, A604 (41TE) (Contains: # 960, 967D, 968D) 2004-Up | — |
| 961 | Part # 92961AK | Piston Kit, A604 Overdrive & Reverse W/Input Clutch Hub 1990-Up (Includes: Piston, Input Clutch Hub And 2 O-Rings) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 376 | Part # S92376D | Diaphragm, A604 Switch Seal (In Solenoid Pack) (9 Per Pack) Sonnax | — |
| 420 | Part # 92420A | Solenoid Pack, A604 (Shift Control) 1999-Up (Retro Fits) Has 7 Screws That Holds On The Tin Solenoid Cover | 1 |
| 431 not on diagram | Part # 92431C | Solenoid, 42RLE EPC 2006-Up | — |
| 540 not on diagram | Part # 92540 | By-Pass Valve, 42RLE (In Case Under Pump) 2003-Up | 1 |
| 540 not on diagram | Part # 92540A | By-Pass Valve, A604 (Splices Into Cooler Line) | 1 |
| 740 | Part # 92740 | Valve Body, A604 (#33 On Plate) 1989-90 | — |
| 740 | Part # 92740A | Valve Body, A604 (#46 On Plate) 1991-92 | — |
| 740 | Part # 92740B | Valve Body, A604 (#66 On Plate) 1993-94 | — |
| 740 | Part # 92740BA | Valve Body, A604 (#66 On Plate) 1993-94 (No PRNDL Switch) | — |
| 740 | Part # 92740C | Valve Body, A604 (Uses PRNDL Switch)(With 9 Round Pin Connector)(PRNDL Switch Is The Black Switch On Valve Body)… | — |
| 740 | Part # 92740CA | Valve Body, A604 (Uses A PRNDL Switch)(With 9 Flat Blade Connector)(PRNDL Switch Is The Black Switch On Valve Body)… | — |
| 740 | Part # 92740D | Valve Body, A604 (With Governor Pressure Solenoid)(With 2 Case Connectors) 2006-08 | — |
| 741 not on diagram | Part # A12741A-5 | Check Ball, Chrysler (All) (11/32”OD) (Torlon) | — |
| 741 not on diagram | Part # S92741CS-1 | Valve, 42RLE Solenoid Switch (Oversize) (Sonnax) Must Use T-F-92835-TL Reamer | — |
| 930 not on diagram | Part # 92930 | Replaced by 92950A | — |
| 935 not on diagram | Part # 92935 | Accumulator Assembly, A604 Overdrive & Underdrive (W/1 Spring) 1989-Up | — |
| 950 not on diagram | Part # 92950 | Accumulator Assembly, A604 Underdrive (W/1 Spring) (Use 92935). | — |
| 950 not on diagram | Part # 92950A | Accumulator Assembly, 42RLE Overdrive, Underdrive & 2-4 Accumulator | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 92410 | Switch, A604 Neutral Safety (External) 1989-95 | 1 |
| 410 | Part # 92410C | Switch, A604 Neutral Safety & PRNDL (Internal) 1995-9/98 (Round Pins) | 1 |
| 410 | Part # 92410CA | Switch, A604 Neutral Safety & PRNDL (Internal) 10/98-Up (Flat Blades) | 1 |
| 436 | Part # 92436 | Sensor, A500SE (42RE) Output Speed Sensor (.928”OD Threads) | 1 |
| 438 | Part # 92438 | Speed Sensor, A604 Input (.855”OD Threads) | 1 |
| 439 | Part # 92439 | Sensor, A604 Trans Range (PRNDL) (External) 1989-90 | 1 |
| 439 | Part # 92439A | Sensor, A604 Trans Range (PRNDL) (External) 1991-96 | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 92010 | Filter, A604 1989-Up | 1 |
| 015 not on diagram | Part # 92015 | Screen, 42RLE Low/Reverse Piston Feed (Orifice)(Black) | 1 |
| 016 not on diagram | Part # 92016 | Screen, A604 Solenoid | — |
| 018 not on diagram | Part # 12018 | Screen, A604 Valve Body Regulator Feed | — |
| 765 | Part # 92765 | Pan, A604 Bottom (Fits Case With 1 Valve Body Connector) 1989-05 | 1 |
| 765 | Part # 92765D | Pan, A604 Bottom (Fits Case With 2 Valve Body Connectors) 2006-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 12070 | Seal, A404/413/470/670 Front (Without Flange)(.363” Thick) | 1 |
| 070 | Part # 12070A | Seal, 42RLE Front (With Flange) 2003-Up | — |
| 070 | Part # 92070AA | Seal, 62TE Front (W/Flange)(.283”Thick) 2007-Up | — |
| 072 | Part # 92072 | Seal, 42RLE Linkage/Valve Body Stem Seal) (Rubber) 2003-Up | 1 |
| 074 | Part # 32074 | Seal, 62TE (Both Axles)(2.290”OD) | 2 |
| 074 | Part # 32074A | Seal, A413/470/670 Axle AWD (Goes In Transfer Case Adapter) | 1 |
| 177 | Part # 92177T | Ring, 42RLE Input Shaft (1.443”OD) (Teflon) 2003-Up | 1 |
| 179 not on diagram | Part # 12179A | Ring, 42RLE Stator (2.062”OD) (Metal) (Seal Plated) 2003-Up | 1 |
| 181 | Part # 92181T | Ring, 4L80E Center Support (Teflon) 1991-Up | 1 |
| 191 | Part # 92191 | Ring, 42RLE Accumulator Non-Rotating (1.013”OD)(Graphite) 2003-Up | 1 |
| 191 | Part # 92191T | Ring, A604 Accumulator (1.013”OD) (Teflon) 1989-Up | — |
| 300 | Part # 92300 | Gasket, A604 Bottom Pan | 1 |
| 303 | Part # 92303 | Gasket, A604 Differential Cover | 1 |
| 304 | Part # 92304 | Gasket, A604 Transfer Gear Cover | 1 |
| 310 | Part # 92310 | Gasket, 42RLE Pump 2003-Up | 1 |
| 311 | Part # 32311 | O-Ring, 42RLE Pump 2003-Up | 2 |
| 328 | Part # 92328 | Gasket, A604 Solenoid Pack (Takes 2) 1989-98 | 1 |
| 328 | Part # 92328A | Gasket, A604 Solenoid Pack 1999-Up | 1 |
| 329 | Part # 92329 | Gasket, 42RLE Low/Reverse Piston Retainer 2003-Up | 1 |
| 330 | Part # 92330B | O-Ring, 42RLE Overdrive/Reverse Clutch (Inner) 2003-Up | 1 |
| 331 | Part # 92331B | Lip Seal, 42RLE Overdrive/Reverse Clutch (Outer) & Input Clutch Retainer (Outer) 03-Up | 1 |
| 332 | Part # 92332A | D-Ring, 42RLE 2-4 Clutch (Inner) 2003-Up | 1 |
| 333 | Part # 92333A | D-Ring, 42RLE 2-4 Clutch (Outer) 2003-Up | 1 |
| 334 | Part # 92334A | O-Ring, A604 Input Clutch Rear (.070”) (Green) (Inner) 1989-E90 | 1 |
| 334 | Part # 92334AA | O-Ring, 42RLE Input Clutch Rear (.103”) Red (Inner) 2003-Up | 1 |
| 334 | Part # 92334B | O-Ring, A604 Input Clutch Front (.070”) (Orange) (Inner) 1989-E90 | 1 |
| 334 | Part # 92334BA | O-Ring, 42RLE Input Clutch Front (.103”) Blue (Inner) 2003-Up | 1 |
| 338 | Part # 92338A | D-Ring, 42RLE Low/Reverse Clutch (Inner) 2003-Up | 1 |
| 339 | Part # 92339A | D-Ring, 42RLE Low/Reverse Clutch (Outer) 2003-Up | 1 |
| 340 | Part # 92340 | Lip Seal, 62TE Underdrive Clutch (Inner) 2007-Up | 2 |
| 341 | Part # 92341 | Lip Seal, A604 Underdrive Clutch (Outer) 1989 | 1 |
| 341 | Part # 92341A | Lip Seal, 42RLE Underdrive Clutch (Outer) 2003-Up | 1 |
| 342 | Part # 92342 | Seal, A604 2nd-4th Feed (Valve Body To Case) | 1 |
| 347 | Part # 92347C | Grommet, A604 PRNDL Switch To Case (Thin, 1.350”OD For Case Connector Hole)(Rubber) 1996-98 | — |
| 347 | Part # 92347CA | Grommet, 42RLE PRNDL Switch To Case (Thick 1.420”OD For Case Connector Hole) (Rubber) 2003-Up | — |
| 348 | Part # 32348 | O-Ring, A604 Extension Housing 1989-Up | 1 |
| 355 | Part # 92355 | O-Ring, A604 Low/Reverse Accumulator Cover | 1 |
| 370 | Part # 92370A | O-Ring, A604 Input Speed Sensor(Small) | 1 |
| 370 | Part # 92370B | O-Ring, A604 Output Speed Sensor(Large) | 1 |
| 371 | Part # 44371A | Gasket, 010/087/089/090 Filler Tube | 1 |
| 376 | Part # 92376A | Seal, A604 Solenoid Connector To External Wire Harness 1989-Up (Flat, Fits Over The Connector Prongs) | — |
| 378 not on diagram | Part # 92378 | O-Ring, A604 Cooler By-Pass Valve | — |
| 379 | Part # 92379 | O-Ring, 42RLE Filter 2003-Up | — |
| 381 | Part # 92381 | O-Ring, A604 Transfer Shaft Bearing Retainer | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 12034 | Bushing, 42RLE Pump Body (Babbit) 2003-Up | 2 |
| 034 | Part # 12034A | Bushing, A404/413/470/670 Pump Body (Bronze) | 1 |
| 039 | Part # 92039 | Bushing, A604 2-4 Clutch Hub 1989-95 | — |
| 039 | Part # 92039A | Bushing, 42RLE Clutch Hub 2003-Up | — |
| 047 | Part # 92047 | Bushing, A604 Input Shaft (Rear) (.595”OD) 1989-01 | 1 |
| 047 | Part # 92047A | Bushing, 42RLE Input Shaft (Rear) (.605”OD) 2003-Up | — |
| 050 | Part # 92050 | Bushing, 42RLE Input Clutch Hub (Front) 2003-Up | 1 |
| 050 | Part # S92050 | Bushing, 42RLE Input Clutch Hub (Front) 2003-Up (Sonnax) (Has A Tighter | — |
| 052 | Part # 92052 | Bushing, A604 Overdrive Clutch Hub (.365” Tall) 1989-95 | 1 |
| 052 | Part # 92052A | Bushing, 42RLE Overdrive Clutch Hub (.283” Tall) 2003-Up | 1 |
| 052 | Part # S92052E | Bushing, A604 Overdrive Clutch Hub (1 Piece) 1989-95 (Sonnax) | 1 |
| 052 | Part # S92052EA | Bushing, 42RLE Overdrive Clutch Hub (1 Piece)(Fits Hub With .937”ID) 2003-Up (Sonnax) | 1 |
| 052 | Part # S92052EB | Bushing, 42RLE Overdrive Clutch Hub (1 Piece)(Fits Hub With .941”ID) 2003-Up (Sonnax) | — |
| 058 | Part # 92058 | Bushing, 42RLE Rear Planet 2003-Up | 1 |
| 066 | Part # 32066 | Bushing, A404/413/470/670 Extension Housing | 2 |
| 207 | Part # 92207 | Washer, 62TE Output Gear (Under Bolt) 2007-Up | 1 |
| 208 | Part # 92208 | Washer, A604 Driven Transfer Gear (Under Nut) | 1 |
| 211 | Part # 92211 | Bearing W/Races, 42RLE Stator To Input Drum (1.713”ID) 2003-Up | 1 |
| 213 | Part # 92213 | Race, 42RLE Overdrive Hub To 2-4 Hub (.039”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213A | Race, 42RLE Overdrive Hub To 2-4 Hub (.048”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213B | Race, 42RLE Overdrive Hub To 2-4 Hub (.057”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213C | Race, 42RLE Overdrive Hub To 2-4 Hub (.066”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213D | Race, 42RLE Overdrive Hub To 2-4 Hub (.074”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213E | Race, 42RLE Overdrive Hub To 2-4 Hub (.083”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213F | Race, 42RLE Overdrive Hub To 2-4 Hub (.091”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213G | Race, 42RLE Overdrive Hub To 2-4 Hub (.100”) (3 Slot) 2003-Up | 1 |
| 213 | Part # 92213H | Race, 42RLE Overdrive Hub To 2-4 Hub (.109”) (3 Slot) 2003-Up | 2 |
| 213 | Part # 92213HA | Race, 42RLE Overdrive Hub To 2-4 Hub (.117”) (3 Slot) 2003-Up | 2 |
| 213 | Part # 92213J | Race, 42RLE Overdrive Hub To 2-4 Hub (.126”) (3 Slot) 2003-Up | 2 |
| 213 | Part # 92213JA | Race, 62TE Overdrive Hub To 2-4 Hub (.135”)(3 Slot) 2007-Up | 1 |
| 214 | Part # 92214 | Washer, A604 Overdrive Hub To 2-4 Hub (4 Tab) (1.263”ID) | 1 |
| 220 | Part # 92220 | Washer, 62TE Underdrive Hub To Overdrive Hub (5 Tab)(.050”Thick)(1.260”ID) 2007-Up | 1 |
| 221 | Part # 92221 | Race, 62TE Underdrive Hub To Overdrive Hub (3 Tab)(.031”Thick)(1.265”ID) 2007-Up | 1 |
| 232 | Part # 92232 | Bearing W/Races, 62TE Input Drum To Underdrive Hub)(1.790”OD) 2007-Up… | 1 |
| 238 | Part # 92238 | Bearing, A604 Front Planet To Rear Sun Gear | 1 |
| 241 | Part # 92241 | Bearing, A604 Rear Sun Gear To Rear Planet 1989-93 (Use 92211) | 1 |
| 241 | Part # 92241A | Bearing, A604 Rear Sun Gear To Rear Planet 1994-Up (Use 92232) | 1 |
| 251 | Part # 92251 | Bearing, A604 Presses On Rear Planet 1989-UP (use 32274) | — |
| 252 | Part # 92252 | Cup Race, A604 Rear Planet Bearing To Case 1989-Up (use 32273) | — |
| 269 | Part # 92269 | Shim, A604 Transfer Gear (.144”) Output (Use 92276) | 1 |
| 273 | Part # 32273 | Cup Race, 42RLE Case To Output Shaft (#278) 2003-Up | 1 |
| 273 | Part # 92273 | Cup Race, A604 Pinion (Fits 20 Roller Bearing) | 1 |
| 273 | Part # 92273A | Cup Race, A604 Differential (Fits 19 Roller Bearing) | 1 |
| 273 | Part # 92273C | Cup Race, A604 Differential (AWD)(Cast # BT1B329135/Q/CL7C)(Presses Into 92770C Housing)… | 1 |
| 274 | Part # 32274 | Bearing, 42RLE Case To Output Shaft (#279) 22 Rollers (1.497”ID) 2003-Up | 1 |
| 274 | Part # 92274 | Bearing, A604 Differential/Pinion (20 Roller) (1.500”ID) | 1 |
| 274 | Part # 92274A | Bearing, A404/413/470/670 Differential (19 Roller) (1.625”ID) | 1 |
| 274 | Part # 92274C | Cone Bearing, A604 Differential (24 or 25 Rollers) (1.810”ID) AWD (CAst # LM503349) | 1 |
| 275 not on diagram | Part # T32275 | Support Bearing W/Seal, A404/413/470/670 Axle Stabilizer (Teckpak) | — |
| 276 | Part # 92276B | Shim, 62TE Drive Transfer Gear # 269 (.144” ) 2007-Up | 1 |
| 276 | Part # 92276C | Shim, 62TE Drive Transfer Gear # 269 (.148” ) 2007-Up | — |
| 276 | Part # 92276D | Shim, 62TE Drive Transfer Gear # 269 (.152” ) 2007-Up | — |
| 276 | Part # 92276E | Shim, 62TE Drive Transfer Gear # 269 (.158” ) 2007-Up | — |
| 278 | Part # 92278 | Cup Race, 42RLE Rear Planet To Case (#252) 2003-Up | 1 |
| 279 | Part # 92279 | Cone Bearing, 42RLE Presses On Rear Planet (#251) 2003-Up | 1 |
| 280 | Part # 92280 | Cup Race, A604 Driven Transfer Gear To Case | 1 |
| 281 | Part # 92281 | Bearing, A604 Driven Transfer Gear (20 Rollers) (1.625”ID) | 1 |
| 309 not on diagram | Part # 92309 | Gasket / Washer, A604 Pump Bolt | — |
| 741 not on diagram | Part # 92741T-2 | Bushing, A604 Boost Valve (Transgo) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 92500 | Pump, A604 (25 Teeth Inner Gear)(3 Ring Stator) 1989 | — |
| 500 not on diagram | Part # 92500A | Pump, A604 (25 Teeth Inner Gear)(4 Ring Stator With Cast # 4377161 Or 4567666)(Stator Shaft Length Is 3 7/16” Long)… | 3 |
| 500 not on diagram | Part # 92500B | Pump, A604 (12 Teeth Inner Gear)(4 Ring Stator With Cast # 4659715)(Stator Shaft Length Is 3 7/16” Long) 2000-Up… | 1 |
| 510 not on diagram | Part # 92510 | Pump Body W/Gears, 42RLE (25 Teeth Inner Gear)(.708” Thick) 2003-Up (5 Bolts To Case) (With 2 Cutouts In Gasket Area)… | — |
| 510 not on diagram | Part # 92510A | Pump Body W/GEars, 42RLE (12 Teeth Inner Gear)(.495” Thick) 2003-Up | — |
| 520 | Part # 92520 | Stator, A604 (3 Ring) 1989 | — |
| 520 | Part # 92520A | Stator, A604 Pump Cover (4 Ring) 1990-Up (Cast # 4377161 or 4567666)(Shaft Length Is 3 7/16” Long) | 2 |
| 520 | Part # 92520B | Stator, A604 Pump Cover (4 Ring) 2000-Up (Cast # 4659715)(Shaft Length Is 3 7/16” Long) | 1 |
| 530 | Part # 92530A | Pump Gears, A604 (25 Teeth Inner Gear) (.708” Thick) 1989-Up | — |
| 530 | Part # 92530B | Pump Gear Set, 42RLE (12 Teeth Inner Gear) (.495” Thick) 2003-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 92100 | Friction, A604 Overdrive Clutch (.086”) 1st Design 1989 | 1 |
| 100 | Part # 92100A | Friction, 42RLE Underdrive & Reverse Clutch (.071”) (Tan) 2003-Up | 1 |
| 100 | Part # 92100B | Friction, 42RLE Overdrive Clutch (.073”) (High Energy) 2003-Up | 1 |
| 104 | Part # 92104 | Friction, 42RLE 2-4 Clutch (.086”) (High Energy) 2003-Up | 1 |
| 104 | Part # 92104A | Friction, A604 2-4 Clutch (.086”) Tan 1989-91 | 1 |
| 114 | Part # 92114 | Friction, 42RLE Low/Reverse Clutch (.072”) (High Energy) 2003-Up | 1 |
| 114 | Part # 92114A | Friction, A604 Low/Reverse Clutch (.072”) Tan 1989-91 | 1 |
| 119 not on diagram | Part # 92119A | Friction Module, A604 1990-Up | — |
| 119 not on diagram | Part # 92119B | Friction Module, A604 Hi-Energy 1990-Up | — |
| 120 | Part # 92120 | Steel, 42RLE Overdrive, Underdrive & Reverse Clutch (.068”) 2003-Up | 1 |
| 120 | Part # 92120A | Steel, A604 Overdrive Clutch (.098”) 1989 | 1 |
| 124 | Part # 92124 | Steel, 42RLE 2-4 Clutch (.101”) 2003-Up | 1 |
| 134 | Part # 92134 | Steel, 42RLE Low/Reverse Clutch (.067”) 2003-Up | 1 |
| 139 not on diagram | Part # 92139 | Steel Module, A604 | — |
| 140 | Part # 92140 | Pressure Plate, A604 Overdrive Clutch (8 Lug) 1989-E90 | 1 |
| 140 | Part # 92140A | Pressure Plate, 42RLE Overdrive Clutch (4 Lugs)(4.530”ID) L1990-Up | 1 |
| 142 | Part # 92142A | Pressure Plate, A604 Underdrive Clutch (.215”) 1990-96 (Use 92142BK) | 1 |
| 142 | Part # 92142AK | Pressure Plate Kit, 62TE Underdrive Clutch (.215”) 2007-Up (W/92860A Snap Ring) | — |
| 142 | Part # 92142B | Pressure Plate, 42RLE Underdrive Clutch (.235”) 2003-Up | 1 |
| 142 | Part # 92142BA | Pressure Plate, 42RLE Underdrive Clutch (.245”) 2003-Up | — |
| 142 | Part # 92142BAK | Pressure Plate Kit, 62TE Underdrive Clutch (.245”) 2007-Up (W/92140A & 92860A) | — |
| 142 | Part # 92142BK | Pressure Plate Kit, 62TE Underdrive Clutch (.235”) 2007-Up (W/92860A Snap Ring) | 1 |
| 142 | Part # 92142C | Pressure Plate, 42RLE Underdrive Clutch (.255”) 2003-Up | 1 |
| 142 | Part # 92142CK | Pressure Plate Kit, 62TE Underdrive Clutch (.255”) 2007-Up (W/92860A Snap Ring) | 1 |
| 142 | Part # 92142DK | Pressure Plate Kit, 62TE Underdrive Clutch (.275”) 2007-Up (W/92860A Snap Ring) | — |
| 150 | Part # 92150A | Pressure Plate, 42RLE Reverse Clutch (.355” Thick) At The Edge 2003-Up | — |
| 150 | Part # 92150B | Pressure Plate, 42RLE Reverse Clutch (.186” Thick) 2003-Up | 1 |
| 154 | Part # 92154 | Pressure Plate, A604 Low/Reverse Clutch (.210”) 1989-Up | — |
| 154 | Part # 92154A | Pressure Plate, A604 Low/Reverse Clutch (.220”) 1989-Up | — |
| 154 | Part # 92154B | Pressure Plate, A604 Low/Reverse Clutch (.230”) 1989-Up | 1 |
| 154 | Part # 92154C | Pressure Plate, A604 Low/Reverse Clutch (.240”) 1989-Up | 1 |
| 154 | Part # 92154D | Pressure Plate, 42RLE Low/Reverse Clutch (.250”) 2003-Up | 1 |
| 154 | Part # 92154EA | Pressure Plate, A604 Low/Reverse Clutch (.268”) 1989-Up | 1 |
| 154 | Part # 92154F | Pressure Plate, A604 Low/Reverse Clutch (.270”) 1989-Up | 1 |
| 154 | Part # 92154G | Pressure Plate, A604 Low/Reverse Clutch (.206”) 1989-Up | 1 |
| 932 | Part # 92932 | Replaced by 92937 | — |
| 937 | Part # 92937 | Piston, 42RLE Overdrive/2-4/Underdrive Accumulator (Aluminum) 2003-Up (Takes Two 72191AT Teflon Rings) | 1 |
| 937 | Part # 92937A | Piston, 42RLE Overdrive/2-4/Low/Reverse & Underdrive Accumulators (Bonded) 2004-Up | — |
| 947 | Part # 92947 | Piston, 42RLE Low/Reverse Accumulator (Aluminum) 2003-Up | 1 |
| 952 | Part # 92952 | Piston, A604 Overdrive Accumulator (Use 92937) | 1 |
| 960 | Part # 92960 | Piston, 42RLE Underdrive Clutch (With Molded Rubber) 2003-Up | 1 |
| 961 | Part # 92961 | Piston, 42RLE Overdrive/Reverse Clutch (8 Lug Overdrive Pressure Plate) 2003-Up | 1 |
| 961 | Part # 92961A | Piston, 62TE Overdrive/Reverse Clutch (4 Lug Overdrive Pressure Plate) 2007-Up | 1 |
| 967 | Part # 92967 | Piston, A604 (40TE/41TE) Low/Reverse Clutch (Aluminum) (1.055” Thick) 1989-03 | 1 |
| 967 | Part # 92967C | Piston, A604 (40TE) Low/Reverse Clutch (Bonded)(1.185” Thick) 2004-Up | — |
| 967 | Part # 92967D | Piston, A604 (41TE) Low/Reverse Clutch (Bonded)(1.040” Thick) 2004-Up (Cast # 4800256AA) (When Out Use 262967A) | 1 |
| 967 | Part # 262967A | Piston, 62TE Low/Reverse Clutch (Bonded)(1.054”Thick)(Cast # 5078591AA) 2007-Up | 2 |
| 968 | Part # 92968 | Piston, 42RLE 2-4 Clutch (.668” Thick)(Aluminum) 2003-Up | 1 |
| 968 | Part # 92968C | Piston, A604 (40TE) 2-4 Clutch (Bonded)(.855” Thick) 2004-Up | — |
| 968 | Part # 92968D | Piston, 42RLE 2-4 Clutch (Bonded)(.665” Thick) 2004-Up | — |
| 970 | Part # 92970 | Spring, 42RLE Underdrive Clutch Return (3.002”OD) (2.250” Tall) 2003-Up | 1 |
| 971 | Part # 92971 | Spring, 42RLE Overdrive & Reverse Clutch Return (.063” Thick) (4.992”OD)(8 Fingers) 2003-Up | 1 |
| 977 | Part # 92977 | Spring, 42RLE Low/Reverse Clutch Return (.072” Thick) (5.390”OD)(8 Fingers) 2003 Only | 1 |
| 978 | Part # 92978 | Spring, 42RLE 2-4 Clutch Return (.063” Thick) (6 1/2”OD) (8 Fingers) 2003-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 554 | Part # 92554 | Drum, A604 Input Clutch Retainer (W/Bevel) 1989 | — |
| 554 | Part # 92554A | Drum, A604 Input Clutch Retainer (W/Out Bevel) 1990-96 | 1 |
| 554 | Part # 92554B | Drum, 42RLE Input Clutch Retainer (Cast # 4446635) 2003-Up | 2 |
| 560 not on diagram | Part # 92560A | Drum, 42RLE Input Clutch Retainer (Cast # 4446635) 2003-Up | 1 |
| 570 | Part # 92570 | Hub, A604 Overdrive & Reverse (1.140”OD Shaft) 1989-95 | — |
| 570 | Part # 92570A | Hub, 42RLE Overdrive & Reverse (1.160”OD Shaft) 2003-Up | 2 |
| 571 | Part # 92571 | Hub, 42RLE Underdrive Clutch With Solid Shaft 2003-Up | 1 |
| 574 | Part # 92574 | Hub, A604 Input Clutch (For 3 Ring Stator) 1989 | — |
| 574 | Part # 92574A | Hub, 42RLE Input Clutch (For 4 Ring Stator) 2003-Up | 1 |
| 578 | Part # 92578 | Hub & Sun Gear, A604 2nd-4th Clutch (1.140”OD Bushing) 1989-95 | 1 |
| 578 | Part # 92578A | Hub & Sun Gear, 42RLE 2nd-4th Clutch (1.160”ID Bushing) 2003-Up | 1 |
| 582 | Part # 92582 | Planet, A604 Front 1989-95 | 1 |
| 582 | Part # 92582A | Planet, 42RLE Front (With Heat Treated Splines) 2003-Up | 1 |
| 584 | Part # 92584 | Planet, A604 Rear (4 Gear) 1989-E91 (1” From Step To End OF Shaft) | 1 |
| 584 | Part # 92584A | Planet, A604 Rear (4 Gear) L1991-Up (1 1/8” From Step To End Of Shaft) | 1 |
| 584 | Part # 92584B | Planet, A604 Rear (5 Gear) 1996-Up (1 1/8” From Step To End Of Shaft) Can Use 92584A | 1 |
| 584 | Part # 92584K | Planet Assembly, A604 Rear (4 Gear) 1989-E91 (1” From Step To End Of Shaft) (Contains: Rear Cover, | 1 |
| 594 | Part # 92594 | Ring Gear, 42RLE Rear Planet 2003-Up | 1 |
| 614 | Part # 92614 | Sun Gear, 42RLE Rear Planet 2003-Up | 1 |
| 670 | Part # 92670A | Shaft, A604 Input (22 Splines)(9 1/2” Long) | — |
| 670 | Part # 92670B | Shaft, A604 Input (24 Splines)(9 1/2” Long) | — |
| 710 not on diagram | Part # 92710 | Gear, A604 Output (59 Teeth) | — |
| 710 not on diagram | Part # 92710A | Gear, A604 Output (55 Teeth) | — |
| 710 not on diagram | Part # 92710B | Gear, A604 Output (47 Teeth) | — |
| 710 not on diagram | Part # 92710C | Gear, A604 Output (53 Teeth) | — |
| 710 not on diagram | Part # 92710D | Gear, A604 Output (49 Teeth) | — |
| 710 not on diagram | Part # 92710E | Gear, A604 Output (46 Teeth) | — |
| 710 not on diagram | Part # 92710F | Gear, A604 Output (50 Teeth) | — |
| 712 not on diagram | Part # 92712 | Gear, A604 Transfer (54 Teeth) | — |
| 712 not on diagram | Part # 92712A | Gear, A604 Transfer (58 Teeth) | — |
| 712 not on diagram | Part # 92712B | Gear, A604 Transfer (50 Teeth) | — |
| 712 not on diagram | Part # 92712C | Gear, A604 Transfer (46 Teeth) | — |
| 712 not on diagram | Part # 92712D | Gear, A604 Transfer (49 Teeth) | — |
| 716 | Part # 92716 | Differential Housing, A604 (W/22 Roller Bearings On Both Sides) Axle Does Not Use A Snap Ring To Hold It To… | — |
| 716 | Part # 92716A | Differential Housing, A604 (W/22 Roller Bearing On Housing Side) (W/19 Roller Bearing On Ring Gear Side) Roll Pin Holds… | — |
| 716 | Part # 92716AA | Differential Housing, A604 (W/22 Roller Bearing On Housing Side) (W/19 Roller Bearing On Ring Gear Side) Roll Pin Holds… | — |
| 716 | Part # 92716AAA | Differential Housing, A604 (W/22 Roller Bearing On Housing Side)(W/19 Roller Bearing On Ring Gear Side)… | — |
| 716 | Part # 92716AB | Differential Housing, A604 (W/22 Roller Bearing On Housing Side) (W/19 Roller Bearing On Ring Gear Side) 2 Brackets… | — |
| 716 | Part # 92716AC | Differential Housing, A604 (W/22 Roller Bearing On Housing Side) (W/19 Roller Bearing On Ring Gear Side)… | — |
| 716 | Part # 92716AD | Differential Housing, A604 (W/22 Roller Bearing On Housing Side) (W/19 Roller Bearing On Ring Gear Side)… | — |
| 716 | Part # 92716AE | Differential Housing, A604 (W/22 Roller Bearing On Both Sides) (Axle Uses A Snap Ring To Hold It To The Differential) | — |
| 716 | Part # 92716B | Differential Housing, A604 All Wheel Drive (W/25 Roller Bearing On Housing Side) (W/22 Roller Bearing On Ring Gear… | — |
| 716 | Part # 92716BA | Differential Housing, A604 All Wheel Drive (W/25 Roller Bearing On Housing Side) (W/19 Roller Bearing On Ring Gear… | — |
| 720 | Part # 92720A | Ring Gear, A604 Differential (59 Teeth) | — |
| 720 | Part # 92720B | Ring Gear, A604 Differential (60 Teeth) | — |
| 720 | Part # 92720BA | Ring Gear, A604 Differential (63 Teeth) | — |
| 720 | Part # 92720C | Ring Gear, A604 Differential (56 Teeth) | — |
| 727 | Part # 92727B | Plate, 62TE Drive Transfer Gear Nut Retainer 2007-Up (This Plate Goes With 92727A) | — |
| 730 | Part # 92730A | Pinion, A604 Transfer Shaft (17 Teeth) | 1 |
| 730 | Part # 92730B | Pinion, A604 Transfer Shaft (16 Teeth)(No Groove)(2.410”OD) | 1 |
| 730 | Part # 92730BA | Pinion, A604 Transfer Shaft (16 Teeth)(3 Groove)(2.270”OD) | — |
| 730 | Part # 92730C | Pinion, A604 Transfer Shaft (15 Teeth) | — |
| 758 | Part # 92758 | Cover, A604 Differential | 1 |
| 759 | Part # 92759 | Rear Cover, A604 Transfer Gear (1 Dimple) 1989-E91 | — |
| 759 | Part # 92759A | Rear Cover, A604 Transfer Gear (2 Dimples) L1991-Up | 1 |
| 760 | Part # 92760B | Case, A604 3.3/3.8 Liter (W/Out By-Pass Valve Under Pump) 1989-90 | — |
| 760 | Part # 92760C | Case, A604 3.3/3.8 Liter (W/By-Pass Valve Under Pump) 1991-94 | — |
| 760 | Part # 92760CC | Case, A604 3.3/3.8 Liter (No Black Switch On Valve Body) 1995 | — |
| 760 | Part # 92760CCC | Case, A604 3.3/3.8 Liter (No Black Switch On Valve Body) 1995-96 (Early Case Converted To Late) | — |
| 760 | Part # 92760CD | Case, A604 3.3/3.8 Liter (1.350”ID Case Connector Hole) 1996-98 (W/Black Switch On Valve Body) | — |
| 760 | Part # 92760CDC | Case, A604 3.3/3.8 Liter (1.350”ID Case Connector Hole) 1996-98 (W/Black Switch On Valve Body)… | — |
| 760 | Part # 92760CE | Case, A604 3.3/3.8 Liter (1.420”ID Case Connector Hole) 1999-Up (W/Black Switch On Valve Body) | 1 |
| 760 | Part # 92760CEC | Case, A604 3.3/3.8 Liter (1.420”ID Case Connector Hole) 1999-Up (W/Black Switch On Valve Body)… | — |
| 760 | Part # 92760CF | Case, A604 2.7L/3.3L/3.5L/3.8L (1.420”ID Case Connector Hole) 2001-05 (W/Black Switch On Valve Body) Has No Mounting… | — |
| 760 | Part # 92760CFC | Case, A604 2.7L/3.3L/3.5L/3.8L (1.420”ID Case Connector Hole) 2001-05 (With Black Switch On Valve Body) An Early Case… | — |
| 760 | Part # 92760CG | Case, A604 2.7L/3.3L/3.5L/3.8L (1.420”ID Case Connector Hole) 2001-05 (With Black Switch On Valve Body) Has 2 Mounting… | 1 |
| 760 | Part # 92760CH | Case, A604 (2.7L/3.3L/3.5L/3.8L) (1.420”ID Case Connector Hole) 2006-Up (Has A 1.130”ID EPC Solenoid Connector Hole)… | — |
| 760 | Part # 92760D | Case, A604 (2.5/3.0 Liter) (W/Out By-Pass Valve Under Pump) 1991-94 | — |
| 760 | Part # 92760E | Case, A604 (2.5/3.0 Liter) (W/By-Pass Valve Under Pump) 1991-94 | — |
| 760 | Part # 92760EA | Case, A604 (2.5/3.0 Liter) (No Black Switch On Valve Body) 1995-96 | — |
| 760 | Part # 92760EB | Case, A604 (2.5/3.0 Liter) (1.350”ID Case Connector Hole) 1995-98 (W/Black Switch On Valve Body) | — |
| 760 | Part # 92760EC | Case, A604 (2.5/3.0 Liter) (1.420”ID Case Connector Hole) 1998-05 (W/Black Switch On Valve Body)… | — |
| 760 | Part # 92760HA | Case, A604 (2.0/2.4 Liter) (1.350”ID Case Connector Hole) 1995-98 (W/Black Switch On Valve Body) | — |
| 760 | Part # 92760HB | Case, A604 (2.0/2.4 Liter) (No Black Switch On Valve Body) 1995-96 | — |
| 760 | Part # 92760HC | Case, A604 (2.0/2.4 Liter) (1.420”ID Case Connector Hole) 1999-05 (W/Black Switch On Valve Body)… | — |
| 760 | Part # 92760HD | Case, A604 2.0L/2.4L (6 1/8” Top Bolts)(1.420”ID Case Connector Hole)(1.130”ID EPC Solenoid Connector Hole)… | — |
| 760 | Part # 92760J | Case, A604 2.4L (5 1/4” Top Bolts)(1.420”ID Case Connector Hole)(1.130”ID EPC Solenoid Connector Hole)(Starter At 2:00)… | — |
| 770 | Part # 92770 | Extension Housing, A604 (W/Speed-O Hole) 1989-92 | — |
| 770 | Part # 92770A | Extension Housing, A604 (No Speed-O Hole) 1993-Up | — |
| 770 | Part # 92770B | Extension Housing, A604 (1 3/4” Overall Height) 4 Bolt (Cast # 4567511) | 2 |
| 770 | Part # 92770C | Adapter Housing, A604 AWD (Steel)(3 1/2” x 7 1/4”)(1.665” Thick)(With 8 Holes, 4 Holes Are Threaded)… | — |
| 980 | Part # 92980 | Housing, 42RLE Underdrive Piston 2003-Up | 1 |
| 980 | Part # 92980A | Housing, A604 (40TE) Underdrive Piston (.700” Thick) 2004-Up | — |
| 995 | Part # 92995 | Park Pawl, A604 W/Pin & Spring (.340”OD Pin) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 494 | Part # S92494-2 | Shield, A604 Dipstick Tube (Sonnax) Fits Cases With Filler Tubes That Extend Into The Case 1.25” Only | — |
| 540 not on diagram | Part # S92540-6 | Plug, A604 By-Pass Valve (2 Per Kit) Sonnax | — |
| 630 | Part # 92630 | Retainer, 42RLE 2-4 Clutch Piston (.956” Thick)(Steel) With Locking Tab At 6:00, The Feed Hole Is At 6:00 | — |
| 630 | Part # 92630A | Retainer, 42RLE 2-4 Clutch Piston (.912” Thick)(Steel) With Locking Tab At 6:00, The Feed Hole Is At 6:00 | — |
| 698 | Part # 92698 | Baffle, A604 Pinion Bearing (2.760”OD) Early’s Are Long & Late’s Are Short, But They All Retro-Fit | 1 |
| 698 | Part # 92698A | Baffle, A604 Differential Bearing (Under Axle Seal In Extension Housing) 2.210”OD | 1 |
| 698 | Part # 92698B | Baffle, A604 Differential Bearing (Under Axle Seal In Differential Retainer) 2.605”OD | 1 |
| 713 | Part # 92713 | Retainer, A604 Transfer Gear Cup Race (Steel Housing) | 1 |
| 717 not on diagram | Part # 92717A-11 | Retainer, A604 Differential Side Gear Cross Pin (Superior) (For .661”OD Pin) Holds Cross Pin In Housing | — |
| 717 not on diagram | Part # 92717AK-11 | Pin & Retainers, A604 Differential Side Gear (For .661”OD Pin) Contains: 2 Retainers & 1 Cross Pin | — |
| 717 not on diagram | Part # 92717B-11 | Retainer, A604 Differential Side Gear Cross Pin (Superior) (For .735”OD Pin) Holds Cross Pin In Housing | — |
| 717 not on diagram | Part # 92717BK-11 | Pin & Retainers, A604 Differential Side Gear (For .735”OD Pin) Contains: 2 Retainers & 1 Cross Pin | — |
| 717 not on diagram | Part # 92717C-11 | Retaining Pin, A604 Holds Differential Side Gear Cross Pin In Housing | — |
| 717 not on diagram | Part # 92717D-11 | Retainer, A604 Differential Side Gear Cross Pin 2000-Up (Holds Cross Pin In Housing) | — |
| 725 | Part # 92725 | Retainer, A604 Differential 2WD (Cast Iron) (6 Bolt) (2.477” Tall) | 1 |
| 725 | Part # 92725B | Retainer, A604 Differential All Wheel Drive (Cast Iron) (6 Bolt) (2.676” Tall) | — |
| 725 | Part # 92725C | Retainer, A604 Differential All Wheel Drive (Steel) (6 Bolt) | — |
| 727 | Part # 92727A | Retainer, 62TE Drive Transfer Gear Nut 2007-Up (Keeps Nuts From Backing Off)(This Goes With 92727B) | — |
| 741 not on diagram | Part # S92741C-6 | Plugs, 42RLE Switch Valve (2 Plugs)(Non VLP Units) | — |
| 741 not on diagram | Part # S92741CA-6 | Plugs, 42RLE Switch Valve (Oversized)(Non VLP Units)(Use T-92835-RM)… | — |
| 741 not on diagram | Part # S92741P-2 | Sleeve, A604 Pressure Regulator (Sonnax) | 1 |
| 779 | Part # S36779A | Pan Bolt, A604 (Metric)(Sonnax) | — |
| 791 | Part # 62791 | Bolt, 42RLE MPLS Sensor To Valve Body 2003-Up | 1 |
| 795 | Part # 92795 | Bolt W/Washer, A604 Holds On Output Gear (1/4” Thick) 1989-E91 | — |
| 795 | Part # 92795A | Bolt W/Washer, A604 Holds On Output Gear (5/16” Thick) L1991-Up | 1 |
| 796 | Part # 92796 | Nut W/Washer, A604 Holds On Transfer Gear (Gray) 1989-E91 | 1 |
| 796 | Part # 92796A | Nut W/Washer, A604 Holds On Transfer Gear (Gold) L1991-Up | 1 |
| 860 | Part # 92860 | Snap Ring, A604 Holds Underdrive Pressure Plate In (.068” Thick) 1989-E90 | 1 |
| 860 | Part # 92860-1 | Snap Ring, A604 Holds Underdrive Pressure Plate In (.060” Thick) L1990-92 | — |
| 860 | Part # 92860A | Snap Ring, A604 Holds Underdrive Pressure Plate In (.076” Thick)(6 5/16”OD) L1990-Up | 1 |
| 860 | Part # 92860B | Snap Ring, 42RLE Holds Underdrive Pressure Plate In (.090” Thick)(6 5/16”OD) 1997-Up | — |
| 860 | Part # 92860K | Snap Ring Set, 42RLE (21 Pieces) 2001-On | 1 |
| 860 | Part # 92860KA | Snap Ring Set, A604 (10 Piece) 1989-96 (Contains: # 860, 860A, 860B, 861, 863A, 876A, 885, 891, 877 & 875) | — |
| 860 | Part # 92860KB | Snap Ring Set, A604 (8 Piece) 1997-Up (Contains: # 860B, 861, 863A, 875, 885, 891, 877 & 82876A) | — |
| 861 | Part # 92861 | Snap Ring, 42RLE Overdrive Pressure Plate (Bottom) .061” Thick (Wavy) (6 7/8”OD) 2003-Up | 1 |
| 862 | Part # 92862 | Snap Ring, 42RLE Holds Spring To Piston (.060” Thick) (5.325”OD) 2003-Up | 1 |
| 863 | Part # 92863 | Snap Ring, 42RLE Holds Low/Reverse Pressure Plate In Case (.068” Thick)(7”OD) | 1 |
| 863 | Part # 92863A | Snap Ring, 42RLE Holds Low/Reverse Pressure Plate In Case (.076” Thick)(7”OD) | — |
| 863 | Part # 92863B | Snap Ring, 42RLE Holds Low/Reverse Pressure Plate In Case (.076” Thick)(7”OD) | — |
| 875 | Part # 92875 | Snap Ring, 42RLE Holds Input Clutch Retainer In (.095” Thick) 2.595”OD (With 2 Eyelets) 2003-Up | 2 |
| 876 | Part # 92876 | Snap Ring, A604 Under The Underdrive Pressure Plate 1989-E90 | 1 |
| 876 | Part # 92876A | Snap Ring, A604 Under The Underdrive Pressure Plate (.060” Thick) L1990-Up | 1 |
| 877 | Part # 92877 | Snap Ring, 42RLE Holds Underdrive Retainer In (.077” Thick) 2.286”OD(With 2 Eyelets) 2003-Up | 1 |
| 880 | Part # 92880 | Snap Ring, 42RLE Holds Input Shaft To Hub (.061” Thick) 1.030”OD (Wire Type) | 1 |
| 882 | Part # 92882 | Snap Ring, 42RLE Front Planet To Rear Ring Gear (.061” Thick) 4.720”OD | 1 |
| 883 | Part # 92883 | Snap Ring, A604 Holds 2nd-4th Clutch Retainer In (.061” Thick) (7”OD) | 1 |
| 885 | Part # 92885 | Snap Ring, 42RLE Under Low/Reverse Clutch Pressure Plate (.038” Thick) | 1 |
| 891 | Part # 92891 | Snap Ring, 42RLE Overdrive Pressure Plate (Top) (.069” Thick) 2003-Up | 1 |
| 892 | Part # 92892 | Snap Ring, 42RLE Holds Reverse Pressure Plate In (.061” Thick) 2003-Up | 1 |
| 892 | Part # 92892A | Snap Ring, 42RLE Holds Reverse Pressure Plate In (.071” Thick) 2003-Up | 1 |
| 892 | Part # 92892B | Snap Ring, 42RLE Holds Reverse Pressure Plate In (.081” Thick) 2003-Up | 1 |
| 892 | Part # 92892C | Snap Ring, 42RLE Holds Reverse Pressure Plate In (.090” Thick) 2003-Up | 2 |
| 893 | Part # 92893 | Snap Ring, 42RLE Holds Low/Reverse Piston In (.062” Thick) (3.485”OD) 2003-Up | 1 |
| 899 | Part # 92899 | Snap Ring, A604 Transfer Shaft Retainer | 1 |
| 936 | Part # 92936 | Spring, A604 Overdrive Accumulator 1989-95 (Also Fits Underdrive Accumulator 1989-95) | — |
| 936 | Part # 92936A | Spring, 62TE Accumulator (Outer) 2007-Up | 1 |
| 949 | Part # 92949 | Retainer, 42RLE Low/Reverse Accumulator 2003-Up (Aluminum) | 1 |
| 951 | Part # 92951 | Spring, 42RLE Overdrive, Underdrive & 2-4 Accumulator (Outer) 2003-Up | 1 |
| 951 | Part # 92951A | Spring, A604 Overdrive Accumulator (1 Spring Type) (Use 92936) | — |
| 951 | Part # 92951B | Spring, 42RLE Overdrive, Underdrive & 2-4 Accumulator (Inner) 2003-Up | — |
| 957 | Part # 92957 | Retainer, 42RLE Low/Reverse Clutch Piston (Tin) 1989-03 (2nd Design, The 3 Holes In A Row Are All The Same Size)… | 1 |
| 957 | Part # 92957A | Retainer, 42RLE Low/Reverse Clutch Piston (Tin) 2004-Up (3rd Design, The 3 Holes In A Row Has A Larger Middle Hole)… | 1 |
| 994 | Part # 92994 | Park Rod Actuator, A604 (.413” Wide Roller) | 1 |
| 996 not on diagram | Part # 92996 | Cooler Line Fitting, A604 | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.