F4A33-1 / W4A33-1 / W4A-32 parts diagram
Same diagram:
F4A33-1 A, W4A-32, W4A33-1
Transmission page:
Positions:
186 total, 127 on the diagram
Parts:
945 total, 185 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 42000A | Paper & Rubber Kit, KM170/KM17/KM172 1979-88 | — |
| 000 not on diagram | Part # 42000C | Paper & Rubber Kit, KM175/KM177 1985-88 | — |
| 000 not on diagram | Part # 42000E | Paper & Rubber Kit, KM175-5/KM176-5/KM177-8 1988-Up | — |
| 000 not on diagram | Part # 42000H | Paper & Rubber Kit, KM171-5/KM172-5 1989-Up | — |
| 000 not on diagram | Part # 42000L | Paper & Rubber Kit, A4AF1 1991-Up | — |
| 000 not on diagram | Part # 42000LB | Paper & Rubber Kit, A4AF2 / A4BF1 (Elantra 1996-99) (Tiburon 1997-99) | — |
| 000 not on diagram | Part # 42000LC | Paper & Rubber Kit, A4AF3/A4BF2/A4BF3 (Elantra 2000)(Tiburon 2000-01)(Accent 2000-03) | — |
| 000 not on diagram | Part # 42000M | Paper & Rubber Kit, F4A33-1 1990-Up / W4A32/W4A33 (Without Transfer Case Parts) 1990-Up | — |
| 000 not on diagram | Part # 42000MA | Paper & Rubber Kit, W4A32/W4A33 (With Transfer Case Parts) 1990-Up | — |
| 002 not on diagram | Part # 42002A | Overhaul Kit, KM170/KM171/KM172 1979-88 | — |
| 002 not on diagram | Part # 42002C | Overhaul Kit, KM175/KM177 1985-88 | — |
| 002 not on diagram | Part # 42002E | Overhaul Kit, KM175-5/KM176-5/KM177-8 1988-Up | — |
| 002 not on diagram | Part # 42002H | Overhaul Kit, KM171-5/KM172-5 1989-Up | — |
| 002 not on diagram | Part # 42002L | Overhaul Kit, A4AF1/A4AF2 1991-Up (A4AF2 Accent 1995-9/99) | — |
| 002 not on diagram | Part # 42002LB | Overhaul Kit, A4AF2 / A4BF1 (Elantra 1996-99) (Tiburon 1997-99) | — |
| 002 not on diagram | Part # 42002LC | Overhaul Kit, A4AF3/A4BF2/A4BF3 (Elantra 2000) (Accent 2000-03) (Tuburon 2000-01) | — |
| 002 not on diagram | Part # 42002M | Overhaul Kit, F4A33-1 1990-Up / W4A32/W4A33 (Without Transfer Case Parts) 1990-Up | — |
| 002 not on diagram | Part # 42002MA | Overhaul Kit, W4A32/W4A33 (With Transfer Case Parts) 1990-Up | — |
| 004 not on diagram | Part # 42004A | Master L/Steels Kit, KM170/KM171/KM172 1979-88 | — |
| 004 not on diagram | Part # 42004C | Master L/Steels Kit, KM175/KM177 1985-88 | — |
| 004 not on diagram | Part # 42004E | Master L/Steels Kit, KM175-5/KM176-5/KM177-8 1988-Up | — |
| 004 not on diagram | Part # 42004H | Master L/Steels Kit, KM171-5/KM172-5 1989-Up | — |
| 004 not on diagram | Part # 42004L | Master L/Steels Kit, A4AF1 1991-Up (Also A4AF2 Accent 1995-9/1999) | — |
| 004 not on diagram | Part # 42004LB | Master L/Steels Kit, A4AF2 / A4BF1 (Elantra 1996-99) (Tiburon 1997-99) | — |
| 004 not on diagram | Part # 42004LC | Master L/Steels Kit, A4AF3/A4BF2/A4BF3 (Elantra 2000)(Tiburon 2000-01) | — |
| 004 not on diagram | Part # 42004LD | Master L/Steels Kit, A4AF3 (Accent) 2000-Up | — |
| 004 not on diagram | Part # 42004M | Master L/Steels Kit, F4A33-1/W4A33 (Without Transfer Case Parts) 1990-Up | — |
| 004 not on diagram | Part # 42004MA | Master L/Steels Kit, W4A33 (With Transfer Case Parts) 1990-Up | — |
| 004 not on diagram | Part # 42004NA | Master L/Steels Kit, W4A32 (With Transfer Case Parts) 1990-Up | — |
| 006 not on diagram | Part # 42006A | Master W/Steels Kit, KM170/KM171/KM172 1979-88 | — |
| 006 not on diagram | Part # 42006C | Master W/Steels Kit, KM175 1985-88 | — |
| 006 not on diagram | Part # 42006E | Master W/Steels Kit, KM175-5/KM177-8 1988-Up | — |
| 006 not on diagram | Part # 42006H | Master W/Steels Kit, KM171-5/KM172-5 1989-Up | — |
| 006 not on diagram | Part # 42006J | Master W/Steels Kit, KM176-5 1989-Up | — |
| 006 not on diagram | Part # 42006L | Master W/Steels Kit, A4AF1 1991-Up (Also A4AF2 Accent 1995-9/1999) | — |
| 006 not on diagram | Part # 42006LB | Master W/Steels Kit, A4AF2/A4BF1 (Elantra 1996-99) (Tiburon 1997-99) | — |
| 006 not on diagram | Part # 42006LC | Master W/Steels Kit, A4AF3/A4BF2/A4BF3 (Elantra 6/1999-6/2000) (Accent 9/1999-2003) (Tiburon 6/1999-9/2001) | — |
| 006 not on diagram | Part # 42006LD | Master W/Steels Kit, A4AF3 (Accent) 2000-Up | — |
| 006 not on diagram | Part # 42006M | Master W/Steels Kit, F4A33-1/ W4A33 (Without Transfer Case Parts) 1990-Up | — |
| 006 not on diagram | Part # 42006MA | Master W/Steels Kit, W4A33 (With Transfer Case Parts) 1990-Up | — |
| 006 not on diagram | Part # 42006NA | Master W/Steels Kit, W4A32 (With Transfer Case Parts) 1990-Up | — |
| 006 not on diagram | Part # 42006P | Master W/Steels Kit, KM177 1985-88 | — |
| 011 not on diagram | Part # 42011A | Filter Kit, KM170 (Felt) 1979-81 | — |
| 011 not on diagram | Part # 42011AA | Filter Kit, KM170/KM171/KM172/KM175 (Felt) 1982-87 | — |
| 011 not on diagram | Part # 42011E | Filter Kit, KM171-5/KM172-5/KM175-5/KM176-5 (Zero Leak) (.700”) 1987-Up | — |
| 011 not on diagram | Part # 42011EA | Filter Kit, KM171-5/KM172-5/KM175-5/KM176-5 (Felt) 1987-Up | — |
| 011 not on diagram | Part # 42011L | Filter Kit, A4AF1/A4BF1/A4BF2 1991-Up (Half Plastic) | — |
| 011 not on diagram | Part # 42011LA | Filter Kit, A4BF-3 (Hyundai) 2000-Up | — |
| 011 not on diagram | Part # 42011M | Filter Kit, F4A33-1/W4A32-1/W4A33-1 (Zero Leak) 1990-Up | — |
| 011 not on diagram | Part # 42011P | Filter Kit, KM177 1987-Up | — |
| 030 not on diagram | Part # 42030AC | Bushing Kit, KM170/KM171/KM172/KM171-5/KM172-5 1979-Up | — |
| 030 not on diagram | Part # 42030DC | Bushing Kit, KM172/KM175 1983-88 | — |
| 030 not on diagram | Part # 42030E | Bushing Kit, KM171-5/KM175-5/KM176-5/KM177-8/A4AF/A4BF 1989-Up | — |
| 030 not on diagram | Part # 42030M | Bushing Kit, F4A33 | — |
| 165 not on diagram | Part # T42165C | Shift Kit, KM175/KM177/KM175-5/KM176-5/KM177-5 (4 Speed) 1988-Up (Mitsubishi, Hyundai, Dodge) Prevents/Reduces 2-3… | 2 |
| 175 not on diagram | Part # 42175A | Ring Kit, KM170/KM171/KM172 1979-88 | — |
| 175 not on diagram | Part # 42175C | Ring Kit, KM175/KM177 1985-88 | — |
| 175 not on diagram | Part # 42175CC | Ring Kit, All KM Series 4 Speed (Except F4A33/W4A33) Combo 1985-Up | — |
| 175 not on diagram | Part # 42175E | Ring Kit, KM175-5/KM176-5/KM177-8/A4AF/W4A32 1989-Up | — |
| 175 not on diagram | Part # 42175H | Ring Kit, KM171-5/KM172-5 1989-Up | — |
| 175 not on diagram | Part # 42175M | Ring Kit, F4A33/W4A33 1990-Up | — |
| 211 | Part # S42211K | Washer & Shim Kit, All Km Series Stator To Drums (Sonnax) | — |
| 220 | Part # 42220LK | Kit, A4BF1/A4BF2 (Some)/A4AF2/A4AF3 Overdrive Hub (Front)(Contains: 42220L, 42220LA & 42056E) | — |
| 330 not on diagram | Part # 42330CAK | Repair Kit, KM175/KM175-5/KM176-5/KM177/KM177-8 Overdrive Clutch (O-Rings) 1987-Up | — |
| 330 not on diagram | Part # 42330CKK | Repair Kit, KM175/KM175-5/KM176-5/KM177/KM177-8 Overdrive Clutch (O-Rings, Frictions, & Steels) 1985-UP | — |
| 330 not on diagram | Part # 42330YK | Repair Kit, F4A33/W4A32/W4A33 Overdrive Clutch (End Clutch) 1991-Up | — |
| 420 | Part # 42420CK | Solenoid Kit, KM 4 Speed (4 Solenoid)(With Wire Harness)(All Hyundai 1985-Up & Mitsubishi 1987-92) | — |
| 420 | Part # 42420EK | Solenoid Kit, All KM 4 Speed (With 4 Solenoids) With 13 OHM Lock-Up Solenoid (For Mitsubishi 1993-Up)… | — |
| 420 | Part # T42420CK-1 | Solenoid Master Kit, KM 4 Speed (With Wire Harness) (Teckpak) (All Hyundai 1985-Up & Mitsubishi 1987-92) | — |
| 420 | Part # T42420EK-1 | Solenoid Master Kit, KM 4 Speed )4 Solenoid)(With Wire Harness)(For Mitsubishi 1993-Up Not For Hyundai)(Teckpak) | — |
| 520 | Part # 42520LEK | Stator/Drum Kit, A4BF3 (1 Caged Needle Bearing In Direct Drum)… | — |
| 560 not on diagram | Part # 42560C | Piston Kit, KM175 Overdrive Clutch 1985-89 | — |
| 560 not on diagram | Part # 42560E | Piston Kit, KM175-5/KM176-5/A4AF Overdrive Clutch (Cast # D) 1988-Up | — |
| 560 not on diagram | Part # 42560G | Piston Kit, KM177-8/A4BF1/A4BF2 Overdrive Clutch (Cast # E) 1989-Up (Steel Piston) | — |
| 560 not on diagram | Part # 42560LB | Piston Kit, A4AF3 Overdrive Clutch (Aluminum Piston) | — |
| 560 not on diagram | Part # 42560M | Piston Kit, F4A33/W4A32/W4A33 Overdrive Clutch (Cast # C) 1990-Up | — |
| 564 not on diagram | Part # 42564B | Piston Kit, KM171/KM172 Forward Clutch 1983-88 | — |
| 564 not on diagram | Part # 42564C | Piston Kit, KM175 Forward Clutch 1985-89 | — |
| 564 not on diagram | Part # 42564E | Piston Kit, KM175-5/KM176-5/KM177-8/A4AF1/A4BF1 Forward Clutch 1988-Up | — |
| 564 not on diagram | Part # 42564H | Piston Kit, KM171-5/KM172-5 Forward Clutch 1989-Up | — |
| 564 not on diagram | Part # 42564L | Piston Kit, A4AF3 Forward Clutch | — |
| 564 not on diagram | Part # 42564M | Piston Kit, F4A33/W4A33 Forward Clutch 1990-Up | — |
| 564 not on diagram | Part # 42564N | Piston Kit, W4A32 Forward Clutch 1991-Up | — |
| 565 not on diagram | Part # 42565B | Piston Kit, KM171/KM172 Direct Clutch (4.500”OD Piston) 1983-88 | — |
| 565 not on diagram | Part # 42565BA | Piston Kit, KM171/KM172 Direct Clutch (5.000”OD Piston) 1983-88 | — |
| 565 not on diagram | Part # 42565C | Piston Kit, KM175 Direct Clutch 1985-89 | — |
| 565 not on diagram | Part # 42565E | Piston Kit, KM175-5/W4A32/A4BF1/A4BF2 Direct Clutch 1988-Up | — |
| 565 not on diagram | Part # 42565H | Piston Kit, KM171-5/KM176-5/A4AF1 Direct Clutch 1989-Up | — |
| 565 not on diagram | Part # 42565L | Piston Kit, A4AF3 Direct Clutch (Piston Cast #45490-22700) | 1 |
| 565 not on diagram | Part # 42565M | Piston Kit, F4A33/W4A33 Direct Clutch 1990-Up | — |
| 565 not on diagram | Part # 42565Y | Piston Kit, KM172-5 Direct Clutch 1989-Up | — |
| 567 not on diagram | Part # 42567B | Piston Kit, KM171 Center Support (Low/Reverse Clutch) 1983-88 | — |
| 567 not on diagram | Part # 42567C | Piston Kit, KM172/KM175 Center Support (Low/Reverse Clutch) 1983-89 | — |
| 567 not on diagram | Part # 42567E | Piston Kit, KM172-5/KM175-5/KM177-8/A4BF1/A4BF2/W4A32 Center Support (Low/Reverse Clutch) 1988-Up | — |
| 567 not on diagram | Part # 42567H | Piston Kit, KM171-5/KM176-5/A4AF1/A4AF3/F4A32 Center Support (Low/Reverse Clutch) 1989-Up | — |
| 567 not on diagram | Part # 42567M | Piston Kit, F4A33/W4A33 Center Support (Low/Reverse Clutch) 1990-Up | — |
| 583 not on diagram | Part # 42583B | Planet Kit, KM171 1983-88 | — |
| 583 not on diagram | Part # 42583C | Planet Kit, KM175 (26 Teeth Forward Sun Gear) 1985-89 | — |
| 583 not on diagram | Part # 42583CA | Planet Kit, KM175 (29 Teeth Forward Sun Gear) 1985-89 | — |
| 583 not on diagram | Part # 42583D | Planet Kit, KM172 (15/16” Thick Low/Reverse Clutch Hub) 1983-88 | — |
| 583 not on diagram | Part # 42583DA | Planet Kit, KM172 (13/16” Thick Low/Reverse Clutch Hub) 1983-88 | — |
| 583 not on diagram | Part # 42583E | Planet Kit, KM175-5 / A4AF-2 (No Groove) Lug Height Is .950” (Can Use 42583EA) 1988-Up | — |
| 583 not on diagram | Part # 42583EA | Planet Kit, KM175-5 / A4BF-2 (1 Groove) Lug Height Is .950” (Can Use 42583E) 1988-Up | — |
| 583 not on diagram | Part # 42583G | Planet Kit, KM177-8 (No Groove) 1989-Up (Planet With Sun Gears & Bearings Less Ring Gear) Retro Fits With The 42583GA… | — |
| 583 not on diagram | Part # 42583GA | Planet Kit, KM177-8/W4A32 (1 Groove) Can Use 42583G 1989-Up… | — |
| 583 not on diagram | Part # 42583H | Planet Kit, KM171-5 (No Groove) 1989-Up | — |
| 583 not on diagram | Part # 42583J | Planet Kit, KM176-5/A4AF1/A4AF2 (Lug Height Is .844”) (Bearing #247 Has 1 Race On The Bottom) 1989-Up | — |
| 583 not on diagram | Part # 42583LB | Planet Kit, A4AF3 (Lug Height Is .844”)(Bearing #247 Has 2 Races) 2002-Up | — |
| 583 not on diagram | Part # 42583LC | Planet Kit, A4BF1/A4BF2 (Lug Height Is .950”) (Bearing #247 Has 2 Races) 2002-Up | — |
| 583 not on diagram | Part # 42583M | Planet Kit, F4A33/W4A33 1990-Up | — |
| 583 not on diagram | Part # 42583Y | Planet Kit, KM172-5 1989-Up | — |
| 781 | Part # 42781EK | Bolt Set, KM175-5/KM176-5/KM177-8 Overdrive Plate To Case (4 Pieces) | — |
| 781 | Part # 42781LBK | Bolt Set, A4AF3 For Double Ball Bearing Flange #692 (T40 Torx Head)(1.107” Long)(4 Pieces) | — |
| 781 | Part # 42781LK | Bolt Set, A4BF1/A4BF2 For Overdrive Adapter # 692 (T40 Torx Head)(.670”Long)(5 Pieces) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 165 not on diagram | Part # 42165CA | Valve Body Kit, KM With 4 Solenoids 1988-Up (Translab)… | — |
| 165 not on diagram | Part # A42165L | Valve Body Kit, A4AF/A4BF With 6 Solenoids (Translab) | — |
| 420 | Part # 42420LD | Solenoid Assembly, A4AF3/A4BF1 (6 Solenoids With Case Connector) 2000-Up | — |
| 420 | Part # 42420MC | Solenoid Assembly, F4A33 (Diamante, 3000GT, Expo, Gallant) 1990-92 | 1 |
| 420 | Part # 42420MD | Solenoid Assembly, F4A33 (Mitsubishi, Eclipse) 1991-92 | 1 |
| 420 | Part # 42420MG | Solenoid Assembly, F4A33 (Mitsubishi, Eclpise) 1993-94 | 1 |
| 420 | Part # 42420MH | Solenoid Assembly, F4A33 1993-98 | 1 |
| 421 not on diagram | Part # 42421C | Solenoid, KM 4 Speed 1-2 Shift (Orange Wire) 1987-97 | — |
| 421 not on diagram | Part # 42421CA | Solenoid, KM 4 Speed 3-4 Shift (Yellow Wire) 1987-97 | — |
| 425 not on diagram | Part # 42425E | Solenoid, KM Series TCC (Red Wire) 1987-93 | — |
| 425 not on diagram | Part # 42425EA | Solenoid, KM Series TCC (Lock-Up) (White Wire) 1993-Up | — |
| 425 not on diagram | Part # 42425EB | Solenoid, KM Series EPC (Blue Wire) 1987-97 | — |
| 431 not on diagram | Part # 42431E | Solenoid, KM175-5/KM177-5 EPC | — |
| 507 not on diagram | Part # 42507A-5 | Check Ball, KM Series Pump Stator | 1 |
| 680 not on diagram | Part # 42680B | Governor, KM171/KM171-5/KM172-5 With Valve (1.095”OD Of Weight) 1983-Up | — |
| 680 not on diagram | Part # 42680D | Governor, KM172 With Valve (1.295”OD Of Weight) 1983-88 | — |
| 740 | Part # 42740B | Valve Body, KM171 (1 Solenoid) Round Connector (Cast # 3A/T3 Filter Side) | 1 |
| 740 | Part # 42740BA | Valve Body, KM171 (1 Solenoid) Square Connector Z(Cast # H-172-2) | 1 |
| 740 | Part # 42740C | Valve Body, KM175 (4 Solenoid) Round Connector (Cast # 175 Filter Side) | 1 |
| 740 | Part # 42740D | Valve Body, KM172 (1 Solenoid) Round Connector (Cast # 3A/T1 Filter Side) | 1 |
| 740 | Part # 42740E | Valve Body, KM175-5 (4 Solenoid) Square Connector (Cast # 177 Filter Side) | 1 |
| 740 | Part # 42740EA | Valve Body, KM175-5 (4 Solenoid) Square Connector (Cast # 3A32 Filter Side) | 1 |
| 740 | Part # 42740EB | Valve Body, KM175-5/A4AF/F4A33 (4 Solenoid) Square Connector (Cast # 4A3) Long Wire Harness | 1 |
| 740 | Part # 42740EC | Valve Body, KM175-5/A4AF (4 Solenoid) Square Connector (Cast # DOHC 8) Long Wire Harness | 1 |
| 740 | Part # 42740G | Valve Body, KM177-8 (3 Solenoid) Square Connector (Cast # 4AT1A Filter Side) | 1 |
| 740 | Part # 42740H | Valve Body, KM171-5 (1 Solenoid) Square Connector (Cast # 3A/T3 Filter Side) | 1 |
| 740 | Part # 42740J | Valve Body, KM176-5 (4 Solenoid) Square Connector (Cast # 4AT Filter Side) 14” Long Wire Harness | 1 |
| 740 | Part # 42740JA | Valve Body, KM176-5 (4 Solenoid) Square Connector (Cast # 4AT Filter Side) 27” Long Wire Harness | 1 |
| 740 | Part # 42740LA | Valve Body, A4AF1 (4 Solenoid) Square Connector (Cast # A4AF1 Filter Side) | 1 |
| 740 | Part # 42740LB | Valve Body, A4AF (4 Solenoid) Square Connector (Cast # X-3 Filter Side) | — |
| 740 | Part # 42740LC | Valve Body, A4BF1/A4BF2 (4 Solenoid) Square Connector (Cast # A4AF2 Filter Side) | 1 |
| 740 | Part # 42740LD | Valve Body, A4AF3 (6 Solenoid) (Cast # A4AF3 On Both Sides) | 1 |
| 740 | Part # 42740LE | Valve Body, A4AF (4 Solenoid) Square Connector (Cast # V-6 #3 Filter Side) | — |
| 740 | Part # 42740M | Valve Body, F4A33 (3 Solenoid) Square Connector (Cast # 4A31 Filter Side) | 1 |
| 740 | Part # 42740MA | Valve Body, F4A33 (4 Solenoid) Square Connector (Cast # 4A33 Filter Side) (Can Use 42740EB) | 1 |
| 740 | Part # 42740MB | Valve Body, W4A33 (3 Solenoid) Square Connector (Cast # 4A33 Filter Side) | 1 |
| 740 | Part # 42740N | Valve Body, W4A332 (4 Solenoid) Square Connector (Cast # 4A36 Filter Side) | 1 |
| 740 | Part # 42740Y | Valve Body, KM172-5 (1 Solenoid) Square Connector (Cast # 3A/T6 Filter Side) | 1 |
| 741 not on diagram | Part # S42741AM-1 | Manual Valve, KM Series Increases Converter Charge Pressure (Sonnax) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 not on diagram | Part # 42410B | Neutral Switch, KM171/KM172 (4 Prong Round Connector) | — |
| 410 not on diagram | Part # 42410C | Neutral Switch, KM175 (11 Prong Round Connector) | — |
| 410 not on diagram | Part # 42410E | Neutral Switch, KM171-5/KM175-5/KM176-5 (With Wire Harness)(11 Prong Rectangular Connector) Overall Length Is 10 1/4” | — |
| 410 not on diagram | Part # 42410EA | Neutral Switch, KM175-5 (With 7 Prong Connector) Cast # PPS-GF15 | 1 |
| 410 not on diagram | Part # 42410EB | Neutral Switch, F4A22/F4A23 (With 11 Prong Oval Connector) Cast # PPS-GF15 (Connector Points Up) | 1 |
| 410 not on diagram | Part # 42410G | Neutral Switch, KM177-8 (With Wire Harness)(With 11 Prong Rectangle Connector) Overall Length Is 17” | — |
| 410 not on diagram | Part # 42410L | Neutral Switch, A4AF3/A4BF1/A4BF2 (With 11 Prong Oval Connector)(Cast # PA66-0GF15) | 1 |
| 410 not on diagram | Part # 42410M | Neutral Switch, F4A33/W4A33 (With Wire Harness)(With 11 Prong Rectangle Connector) Overall Length Is 13 1/4” | — |
| 410 not on diagram | Part # 42410MA | Neutral Switch, F4A33 (With Wire Harness)(With 11 Prong Oval Connector) Overall Length Is 13 3/4” | — |
| 410 not on diagram | Part # 42410MB | Neutral Switch, F4A33 (With 11 Prong Oval Connector) Cast # PPS-GF15 (Connector Points Down) | 1 |
| 410 not on diagram | Part # 42410Y | Neutral Switch, KM172-5 (4 Prong Square Connector) | — |
| 436 | Part # 42436B | Switch, KM171/KM172/KM175 Pulse Generator (Speed Sensors) | — |
| 436 | Part # 42436E | Switch, KM171-5/KM175-5/KM176-5 Pulse Generators (Speed Sensors) | — |
| 436 | Part # 42436G | Switch, KM177-8 Pulse Generator (Speed Sensor) | — |
| 436 | Part # 42436LB | Switch, A4AF3/A4BF1/A4BF2 Pulse Generator (Speed Sensors) | — |
| 436 | Part # 42436LC | Sensor, A4AF3 Output Speed 2006-Up | — |
| 436 | Part # 42436M | Switch, F4A33/W4A33 Pulse Generator (Speed Sensors) | — |
| 436 | Part # 42436P | Switch, KM177 Pulse Generator | — |
| 437 | Part # 42437J | Sensor, KM175-5/F4A22 Oil Temperature (TOT) 1989-95 | — |
| 437 | Part # 42437L | Sensor, A4AF1/A4AF2/A4BF2/A4BF3/F4A32 Oil Temperature (TOT) 1993-99 | — |
| 437 | Part # 42437M | Sensor, F4A33/W4A33 Oil Temperature (Brass) | — |
| 437 | Part # 42437MA | Sensor, F4A33/W4A33 Oil Temperature (TOT) (Plastic) 1991-99 | — |
| 440 not on diagram | Part # 42440C | Switch, KM175/KM177 Kickdown Servo 1985-88 | — |
| 440 not on diagram | Part # 42440E | Switch, KM175-5/KM177-8 Kickdown Servo 1989-Up | — |
| 440 not on diagram | Part # 42440J | Switch, KM176-5 Kickdown Servo | — |
| 440 not on diagram | Part # 42440M | Switch, F4A33/W4A33 Kickdown Servo | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 not on diagram | Part # 42010A | Filter, KM170 (Felt) 1979-81 | 1 |
| 010 not on diagram | Part # 42010AA | Filter, KM170/KM171/KM172/KM175 (Felt) 1982-87 | 1 |
| 010 not on diagram | Part # 42010E | Filter, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8 (.700”) 1987-Up (Half Plastic) | 1 |
| 010 not on diagram | Part # 42010EA | Filter, KM171-5/KM172-5/KM175-5/KM177-8 (Felt) 1987-Up | 1 |
| 010 not on diagram | Part # 42010L | Filter, A4AF1/ A4BF1 / A4BF2 (Half Plastic) 1991-Up | — |
| 010 not on diagram | Part # 42010LA | Filter, A4AF3/A4BF3 (Hyundai) (Half Plastic) 2000-Up | — |
| 010 not on diagram | Part # 42010P | Filter, KM175-5KM177-8 (Felt) (loks Like A Boot) 1987-Up | — |
| 015 not on diagram | Part # 42015A | Filter, A4AF1/A4AF2/A4AF3/A4BF1/A4BF2/A4BF3 In Valve Body (Flat Plastic)(L Shaped) | — |
| 765 | Part # 42765B | Pan, KM171/KM172/KM175 Bottom (12 Bolt) No Drain Plug 1983-89 | — |
| 765 | Part # 42765E | Pan, KM171-5/KM175-5/KM176-5 Bottom (12 Bolt) With Drain Plug | — |
| 765 | Part # 42765G | Pan, KM177-8 Bottom (13 Bolt) With Side Drain Plug | — |
| 765 | Part # 42765GA | Pan, KM177-8 Bottom (13 Bolt) With Bottom Drain Plug | — |
| 765 | Part # 42765L | Pan, A4BF1/A4BF2 Bottom (13 Bolt) With Drain Plug Facing Rear Cover 1991-Up | — |
| 765 | Part # 42765LB | Pan, A4AF3 Bottom (13 Bolt) With Drain Plug Facing Servo Side Of Case | — |
| 765 | Part # 42765M | Pan, F4A33/W4A32/W4A33 Bottom (14 Bolt) With Drain Plug 1990-Up | — |
| 765 | Part # 42765Y | Pan, KM172-5 Bottom (12 Bolt) With Drain Plug 1989-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 42070A | Seal, All KM Series (Front) 1979-Up (Also A4AF1/A4AF2/A4AF3/A4BF1/A4BF2/A4BF3) | 2 |
| 076 | Part # 42076A | Seal, 4F27E/FNR5 Axle (Both Sides) (.395” Thick)(2.205”OD) 1999-Up | 4 |
| 076 | Part # 42076L | Seal, A4AF1/A4SF2/A4AF3/A4BF1/A4BF2/A4BF3 Axle (Both Axles) 1993-Up | — |
| 076 | Part # 42076M | Seal, F4A33 (Both Axles) 6/1992-Up | — |
| 083 | Part # 42083E | Seal, KM175-5/KM176-5/KM177-8/A4AF3/A4BF1/A4BF2/F4A33/W4A32/W4A33 Overdrive Drum 1988-Up (11/16”ID) 1988-Up | 1 |
| 083 | Part # 42083EA | Seal, KM175-5/KM176-5/KM177-8/A4AF1/W4A32 Overdrive Drum (1/2”ID) 1992-Up | 1 |
| 177 not on diagram | Part # 42177A | Ring, KM170/KM171/KM172/KM175 Input Shaft (Front) Small .944”OD (Metal) 1979-88 | 1 |
| 177 not on diagram | Part # 42177ET | Ring, KM171-5/KM172-5/KM176-5/KM177/KM177-8/A4AF/F4A32/W4A32/W4A33 Input Shaft (Front) Small 1.023”OD (Teflon) 1983-Up | 1 |
| 179 | Part # 42179A | Ring, All KM Series Pump Stator 2.165”OD (Metal) 1979-Up | 1 |
| 179 | Part # 42179ET | Ring, All KM Series Pump Stator 2.165”OD (Teflon) 1988-Up | 1 |
| 181 | Part # 42181A | Ring, KM170/KM171/KM172/KM175 Forward Drum (Front) 1.259”OD (Metal) 1979-88 | 1 |
| 181 | Part # 42181AT | Ring, KM170/KM171/KM172/KM175 Forward Drum (Front) 1.259”OD (Teflon) 1979-88 | — |
| 181 | Part # 42181E | Ring, KM171-5/KM172-5/KM175-5/KM176-5/KM177/KM177-8/A4AF/F4A33/W4A32/W4A33 Forward Drum (Front) 1.370”OD (Metal)… | 1 |
| 182 not on diagram | Part # 42182ET | Ring, KM175-5/KM172-5/KM175-5/KM176-5/KM177-5/F4A32/F4A33/W4A32/W4A33 Reverse Sun Gear 1.574”OD (Teflon) 1989-Up | 1 |
| 185 | Part # 42185AT | Ring, All KM 3 Speed Series Input Shaft (Rear) .513”OD (Teflon) 1979-Up | 1 |
| 185 | Part # 42185C | Ring, All KM 4 Speed Series Overdrive Drum (Lock Joint) (Metal) 1985-Up | — |
| 189 not on diagram | Part # 42189A | Ring, KM170/KM171/KM172/KM175/KM171-5/KM172-5 Governor 1.389”OD (Metal) 1979-Up | 1 |
| 191 not on diagram | Part # 42191A | Ring, Accumulator Piston (Inner) .882”OD (Metal) | 1 |
| 192 not on diagram | Part # 42192A | Ring, All KM Series Accumulator Piston (Outer) 1.772”OD (Metal) | 1 |
| 194 | Part # 42194BT | Ring, Servo Piston (Small) 1.785”OD (Teflon) | 1 |
| 194 | Part # 42194DT | Ring, Servo Piston (Small) 1.947”OD (Teflon) | 1 |
| 195 | Part # 42195BT | Ring, Servo Piston (Large) 2.800”OD (Teflon) | — |
| 195 | Part # 42195ET | Ring, Servo Piston (Large) 2.840”OD (Teflon) | — |
| 195 | Part # 42195MT | Ring, Servo Piston (Large) 3.700”OD (Teflon) | — |
| 195 | Part # 42195PT | Ring, Servo Piston (Large) 3.000”OD (Teflon) | — |
| 300 | Part # 42300A | Gasket, KM170 Bottom Pan (12 Bolt) 1979-81 | — |
| 300 | Part # 42300C | Gasket, KM171/KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5 Bottom Pan (12 Bolt) | — |
| 300 | Part # 42300L | Gasket, A4AF1/A4AF3 Bottom Pan (13 Bolt) 1991-Up | — |
| 300 | Part # 42300LA | Gasket, A4BF1/A4BF2/A4BF3 Bottom Pan (13 Bolt) 1996-Up | — |
| 300 | Part # 42300LAF | Gasket, A4BF1/A4BF2/A4BF3 Bottom Pan (13 Bolt) 1996-Up (Farpak) | — |
| 300 | Part # 42300LF | Gasket, A4AF1/A4AF3 Bottom Pan (13 Bolt) (Durapreme) 1991-Up | — |
| 300 | Part # 42300M | Gasket, F4A33/W4A32/W4A33 Bottom Pan (14 Bolt) 1990-Up | — |
| 300 | Part # 42300P | Gasket, KM177/KM177-8 Bottom Pan (13 Bolt) 1987-Up | — |
| 309 not on diagram | Part # 42309A | Seal, All KM Series Pump Bolt 1979-Up | 1 |
| 310 | Part # 42310A | Gasket, KM170 Pump 1979-81 | 1 |
| 310 | Part # 42310B | Gasket, All KM Series (Except F4A33/W4A32/W4A33) Pump 1982-Up | 1 |
| 310 | Part # 42310L | Gasket, A4AF1/A4AF2/A4AF3/A4BF2 Pump To Case 1991-Up | — |
| 310 | Part # 42310M | Gasket, F4A33/W4A32/W4A33 Pump 1990-Up | 1 |
| 311 | Part # 42311A | O-Ring, All KM Series Pump 1979-Up | 1 |
| 313 | Part # 42313E | Seal, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF/F4A33 Inner Pump Gear To Converter Hub L1988-Up | 1 |
| 318 not on diagram | Part # 42318A | Gasket, KM170/KM171/KM172 Case To Bell Housing Gasket (14 Hole Cork) 1979-88 | 1 |
| 318 not on diagram | Part # 42318B | Gasket, KM171/KM172/KM175 Case To Bell Housing Gasket (18 Hole Cork) 1984-88 | 1 |
| 318 not on diagram | Part # 42318E | Gasket, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8 Case To Bell Housing (18 Hole Metal) 1989-Up | 1 |
| 326 | Part # 42326 | Gasket, All KM Series Filter 1979-81 | — |
| 326 | Part # 42326A | Gasket, All KM Series Filter 1982-Up | — |
| 381 not on diagram | Part # 42381A | O-Ring, All KM Series (With 2 Piece Case) Stator Tube | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 42034A | Bushing, All KM Pump Body 1979-Up | — |
| 036 | Part # 42036A | Bushing, All KM Stator Support (Front)(.945”OD) 1979-88 | — |
| 036 | Part # 42036E | Bushing, All KM Stator Support (Front)(.988”OD) 1989-Up | — |
| 041 | Part # 42041C | Bushing, KM175/KM177 Overdrive Shaft (.732”ID) 1985-88 (Use 42056C) | — |
| 041 | Part # 42041E | Bushing, KM175-5/KM176-5/KM177-8/A4AF-1/W4A32/W4A33 Overdrive Shaft (.808”ID) (Use 42056E) | — |
| 044 | Part # 42044A | Bushing, KM170/KM171 Center Support (Wide) (1.537”ID) 1979-88 | 1 |
| 044 | Part # 42044C | Bushing, KM172/KM175/KM177 Center Support (Front) (Narrow) (1.653”ID) 1983-88 | — |
| 044 | Part # 42044CR | Bushing, KM172/KM175/KM177 Center Support (Rear ) (Narrow) (1.576”ID) 1983-88 | — |
| 044 | Part # 42044E | Bushing, All KM With Steel Center Support (Narrow) 1.690”ID 1988-Up | — |
| 046 | Part # 42046A | Bushing, KM170/KM171/KM172/KM175/KM171-5/KM176-5/A4AF1/A4BF2 Direct Drum (Wide) (2.047”ID) 1979-Up | 1 |
| 046 | Part # 42046E | Bushing, 4F27E Reverse Drum (2.157”ID) 1999-Up | — |
| 046 | Part # 42046ER | Bushing, KM172-5/KM175-5/KM177-8/A4BF1/F4A33/W4A32/W4A33 Direct Drum (Rear) Narrow (2.047”ID) 1989-Up | — |
| 046 | Part # 42046L | Bushing, A4AF3 Direct Drum (Front) (2.054”ID) Fits The 42555L Drum (These Are Special Made For Us) | — |
| 052 | Part # 42052A | Bushing, KM170/KM171 Reverse Sun Gear (.823”ID) 1979-88 | 1 |
| 052 | Part # 42052C | Bushing, KM175/KM177 Reverse Sun Gear (1.023”ID) 1985-88 | — |
| 052 | Part # 42052D | Bushing, KM172/KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/ F4A33/W4A32/W4A33 Reverse Sun Gear… | 1 |
| 056 | Part # 42056C | Bushing, F4A41/F4A42/W4A42 Output Sun Gear # 056 1996-Up (.732”ID)(Bronze) | 1 |
| 056 | Part # 42056E | Bushing, F4A51/W4A51(W4A5A)/F5A51/A5HF1 Output Sun Gear # 056 (.808” ID) 1996-Up | 1 |
| 058 not on diagram | Part # 42058A | Bushing, KM170/KM171/KM172/KM171-5/KM172-5 Planet (.469”ID) 1979-Up | 1 |
| 060 | Part # 42060A | Bushing, KM170/KM171 Output Shaft (.904”ID) 1979-88 | 1 |
| 060 | Part # 42060C | Bushing, KM172/KM175/KM177 Output Shaft (Front) (1.178”ID) 1983-88 | 1 |
| 060 | Part # 42060CR | Bushing, KM172/KM175/KM177 Output Shaft (Rear) (1.018”ID) 1985-88 | — |
| 060 | Part # 42060E | Bushing, KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/F4A33/W4A32/W4A33 Output Shaft (Front) (1.300”ID) 1988-Up | — |
| 060 | Part # 42060H | Bushing, KM171-5 Output Shaft (.924”ID) 1989-Up | — |
| 211 | Part # 42211B | Washer, All KM Series Stator To Direct Drum (.055”) Fiber (Also Fits Forward Drum To Direct Drum) | — |
| 211 | Part # 42211BA | Washer, All KM Series Stator To Direct Drum (.070”) Fiber | — |
| 211 | Part # 42211BB | Washer, All KM Series Stator To Direct Drum (.086”) Fiber | — |
| 211 | Part # 42211BC | Washer, All KM Series Stator To Direct Drum (.100”) Fiber | — |
| 211 | Part # 42211BD | Washer, All KM Series Stator To Direct Drum (.118”) Fiber | — |
| 214 | Part # 42214C | Washer, KM175 Hub To Overdrive Drum (4 Tab) (1.415”OD) | — |
| 214 | Part # 42214E | Washer, KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32 Hub To Overdrive Drum (4 Tab) (1.490”OD) | 1 |
| 214 | Part # 42214L | Washer, A4AF3 Hub To Overdrive Drum (.079” Thick) No Tabs (1.008”ID) (1.415”OD) | — |
| 214 | Part # 42214M | Washer, F4A33/W4A33 Hub To Overdrive Drum (4 Tab) (1.500”OD) | — |
| 219 | Part # 42219L | Cup Race, A4BF1/A4BF2/A4BF3 Overdrive Hub (Front)(.205” Thick)(1.785”OD)(1.182”ID) (Has 6 Outer Tabs) | — |
| 219 | Part # 42219LB | Cup Race, A4AF3/A4BF2 Overdrive Hub (Front)(.080” Thick)(1.758”OD)(1.118”ID)(Has 4 Outer Tabs) | — |
| 220 | Part # 42220C | Washer, KM175 Overdrive Hub Front With (1 Tab) (.072”) | 1 |
| 220 | Part # 42220E | Bearing With Race, KM175-5/KM176-5/KM177-8/A4AF1/W4A32/W4A33 (Some A4BF2) Overdrive Hub (Front)(2.275”OD)(1.720”ID)… | — |
| 220 | Part # 42220L | Bearing W/Race & Cup Race, A4BF1/A4AF2/A4AF3 Overdrive Hub (Front) (Bearing W/Race Is .109” Thick, 1.672”OD, 1.108”ID)… | — |
| 220 | Part # 42220LA | Shim, A4BF1/A4BF2 Overdrive Hub (Front)(.015” Thick)(1.270”ID)(Use With 42220L Bearing To Correct Inplay, Per ATRA)… | — |
| 220 | Part # 42220LB | Bearing W/Race & Cup Race, A4AF3/A4BF2 Overdrive Hub (Front)(Bearing W/Race Is .109” Thick, 1.672”OD, 1.132”ID)… | — |
| 220 | Part # 42220P | Bearing W/Race, KM177 Overdrive Hub (Front) | — |
| 223 | Part # 42223C | Ball Bearing, KM175-KM177 Overdrive Drum To Overdrive Cover (1.118”OD) (11/16”ID) 1985-88 | — |
| 223 | Part # 42223E | Ball Bearing, KM175-8/KM176-5/KM177-8/A4AF1/F4A33/W4A32/W4A33 Overdrive Drum To Overdrive Cover (1.122”OD) (1/2”ID)… | — |
| 223 | Part # 42223L | Ball Bearing, A4AF3/A4BF1/A4BF2 Overdrive Drum To Overdrive Cover (1.181”OD) (.671”ID) | — |
| 228 | Part # 42228B | Race, All KM Series Forward Drum To Stator (.030”) | — |
| 228 | Part # 42228BA | Race, All KM Series Forward Drum To Stator (.046”) | — |
| 228 | Part # 42228BAA | Race, All KM Series Forward Drum To Stator (.055”) | — |
| 228 | Part # 42228BB | Race, All KM Series Forward Drum To Stator (.062”) | — |
| 228 | Part # 42228BBB | Race, All KM Series Forward Drum To Stator (.070”) | — |
| 228 | Part # 42228BC | Race, All KM Series Forward Drum To Stator (.078”) | — |
| 229 | Part # 42229B | Bearing With Race, All KM Series Forward Drum To Stator | — |
| 230 | Part # 42230B | Washer, All KM Series Forward Drum To Direct Drum (2 3/4”OD) (.055”) (Use 42211B) | — |
| 230 | Part # 42230M | Washer, F4A33/W4A33 Forward Drum To Direct Drum (2 9/16”OD) | — |
| 231 | Part # 42231B | Race, KM170/KM171 Forward Drum To Hub (1 3/8”OD) | — |
| 231 | Part # 42231C | Race, KM172/KM175 Forward Drum To Hub (1 9/16”OD) (3/4”ID) | — |
| 231 | Part # 42231E | Race, KM171-5/KM172-5/KM176-5/A4AF1/A4AF3/A4BF1/A4BF2/F4A33/W4A32/W4A33 Forward Drum To Hub (1 9/16”OD) (13/16”ID) | — |
| 232 | Part # 42232B | Bearing W/Race, KM170/KM171 Forward Drum To Hub | — |
| 232 | Part # 42232C | Bearing W/Race, KM172/KM175 Forward Drum To Hub | — |
| 232 | Part # 42232E | Bearing W/Race, KM171-5/KM172-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/F4A33/ W4A32/W4A33 Forward Drum To Hub | — |
| 234 | Part # 42234B | Race, All KM Series Forward Hub To Kickdown Drum (.060”) | — |
| 234 | Part # 42234C | Race, All KM Series Forward Hub To Kickdown Drum (.030”) | — |
| 234 | Part # 42234M | Race, All KM Series Forward Hub To Kickdown Drum (.063”) | — |
| 241 | Part # 42241B | Bearing, KM170/KM171 Reverse Sun Gear To Forward Sun Gear (.880”ID) | — |
| 241 | Part # 42241C | Bearing, KM170/KM171 Reverse Sun Gear To Forward Sun Gear (1.030”ID) | — |
| 241 | Part # 42241E | Bearing, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32 Reverse Sun GearTo Forward Sun Gear… | — |
| 241 | Part # 42241M | Race, F4A33/W4A33 Reverse Sun Gear To Forward Sun Gear (1.225”ID) | — |
| 242 | Part # 42242C | Race, KM172/KM175 Reverse Sun Gear To Forward Sun Gear (1.028”ID) | — |
| 242 | Part # 42242E | Race, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32 Reverse Sun Gear To Forward Sun Gear… | — |
| 242 | Part # 42242M | Bearing W/Race, F4A33/W4A33 Reverse Sun Gear To Forward Sun Gear | — |
| 247 | Part # 42247B | Bearing, KM170/KM171/KM172/KM175-5/KM176-5/KM177-8/A4AF1/W4A32 Forward Sun Gear To Planet (Stays In Planet) | — |
| 247 | Part # 42247D | Bearing, KM172/KM175 (Some) Forward Sun Gear To Planet | — |
| 247 | Part # 42247L | Bearing W/Races, A4AF3/A4BF1/A4BF2 Forward Sun Gear To Planet (Stays In Planet) | — |
| 247 | Part # 42247M | Bearing W/Race, F4A33/W4A33 Forward Sun Gear To Planet (Stays In Planet) | — |
| 248 not on diagram | Part # 42248D | Race, KM172/KM175 (Some) Forward Sun Gear To Planet | — |
| 251 | Part # 42251B | Bearing W/Race, KM170/KM171 Planet To Output Hub (1.805”OD) (Also Forward Hub To Kickdown Drum) | — |
| 251 | Part # 42251C | Bearing W/Race, KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/A4AF1 Planet To Output Hub (2.045”OD)… | — |
| 251 | Part # 42251G | Bearing W/Race, KM177-8/F4A33/W4A33 Planet To Output Hub (2.128”OD) (Also Forward Hub To Kickdown Drum) | — |
| 251 | Part # 42251L | Bearing W/Races, A4BF3/A4BF1/A4BF2 Planet To Hub (.142” Thick)(2.100”OD) | — |
| 252 | Part # 42252B | Race, KM170/KM171 Planet To Output Hub (1.455”ID) | — |
| 252 | Part # 42252C | Race, KM175/KM171-5/KM172-5 Planet To Output Hub (1.528”ID) | — |
| 268 | Part # 42268B | Ball Bearing, KM170/KM171/KM171-5 Drive Gear (Front) (1.358”ID) | — |
| 268 | Part # 42268C | Ball Bearing, KM172/KM175 Drive Gear (Front) 1.575”ID (2.830”OD) | — |
| 268 | Part # 42268E | Ball Bearing, KM175-5/KM176-5/KM177-8 Drive Gear (Front) 1.770”ID | — |
| 268 | Part # 42268L | Ball Bearing, A4AF1/F4A33/W4A32/W4A33 Drive Gear (Front) 2.365”ID | — |
| 268 | Part # 42268LB | Double Ball Bearing, A4AF3/A4BF2 Drive Gear (Front)(With 4 Bolt Flange)(2.045”ID) (4.109”OD With Flange) | — |
| 268 | Part # 42268LC | Ball Bearing, A4AF1 Drive Gear (Front)(2.165”ID) | — |
| 268 | Part # 42268Y | Ball Bearing, KM172-5 Drive Gear (Front) 1.575”ID (3.145”OD) | — |
| 271 | Part # 42271B | Ball Bearing, KM170/KM171/KM171-5 Drive Gear (Rear) 1.175”ID | — |
| 271 | Part # 42271C | Ball Bearing, KM172/KM175 Drive Gear (Rear) 1.375”ID | — |
| 271 | Part # 42271E | Ball Bearing, KM175-5/KM176-5/KM177-8 Drive Gear (Rear) 1.572”ID | — |
| 271 | Part # 42271L | Ball Bearing, A4AF1/F4A33/W4A32/W4A33 Drive Gear (Rear) 2.165”ID | — |
| 271 | Part # 42271LC | Ball Bearing, A4AF1/A4AF2 Drive Gear (Rear)(1.930”ID) | — |
| 271 | Part # 42271Y | Ball Bearing, KM172-5 Drive Gear (Rear) 1.575”ID | — |
| 273 | Part # 42273B | Cup Race, KM170/KM171/KM172/KM175/KM171-5/KM172-5 Pinion To Case & Driven Transfer Gear To Case | — |
| 273 | Part # 42273E | Cup Race, KM175-5/KM176-5/KM177-8 Pinion To Case & Driven Transfer Gear To Case | — |
| 273 | Part # 42273L | Cup Race, A4AF1/A4AF3/A4BF1/A4BF2 Pinion To Case (2.840”OD) | — |
| 273 | Part # 42273M | Cup Race, F4A33/W4A32/W4A33 Pinion To Case & Driven Transfer Gear To Case (Cast # 322009J) | 1 |
| 274 | Part # 42274B | Cone Bearing, KM170/KM171/KM172/KM175/KM171-5/KM172-5 Pinion & Driven Transfer Gear | — |
| 274 | Part # 42274E | Cone Bearing, KM175-5/KM176-5/KM177-8/A4AF/F4A33/W4A32/W4A33 Pinion & Driven Transfer Gear | — |
| 274 | Part # 42274L | Cone Bearing, A4AF1/A4AF3/A4BF1/A4BF2 Pinion Shaft (17 Rollers)(1.375”ID) | — |
| 275 | Part # 42275E | Shim, KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2 Pinion Shaft To Driven Transfer Gear (.062”) | — |
| 280 | Part # 42280L | Cone Bearing, A4AF3/A4BF1/A4BF2 Transfer Drive Gear (19 Rollers)(1.770”ID) | — |
| 281 | Part # 42281L | Cup Race, A4AF3/A4BF1/A4BF2 Transfer Drive Gear (.627” Thick)(3.350”OD)(2.805”ID) | — |
| 284 | Part # 42284B | Washer, All KM Series (Except F4A33/W4A33) Idler Gear To Case (With 1 Tab) (2.440”OD) | — |
| 284 | Part # 42284M | Washer, F4A33/W4A33 Idler Gear To Case (With 1 Tab) (1.965”OD) | — |
| 289 | Part # 42289LB | Ball Bearing, A4AF3 Differential Housing (Both Sides)(2.835”OD)(1.377”ID)(.715” Thick) (8 Balls) | — |
| 290 | Part # 42290E | Shim, KM175-5/KM176-5/KM177-8 Differential Bearing Race To Case (.090”) | — |
| 290 | Part # 42290LB | Shim, A4AF3/A4BF1/A4BF2 Differential Bearing Race To Case (.063”) | — |
| 291 | Part # 42291M | Cup Race, F4A33 Differential Bearing | — |
| 292 | Part # 42292LB | Replaced by 42289LB | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 42022A | Band, KM170/KM171/KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/A4AF1/A4AF3 (1 9/16” Wide) | 1 |
| 022 | Part # 42022G | Band, KM177/KM177-8/A4BF1/A4BF2/W4A32 (1 3/4” Wide) 1987-Up | 1 |
| 022 | Part # 42022M | Band, F4A33/W4A33 Kickdown (2 3/8” Wide) 1990-Up | 1 |
| 905 not on diagram | Part # 42905B | Servo Assembly, KM171 (2.075”OD & 3.056”OD) Aluminum Cover 1983-88 | — |
| 905 not on diagram | Part # 42905C | Servo Assembly, KM175 (1.770”OD & 3.056”OD) Tin Cover 1985-89 | — |
| 905 not on diagram | Part # 42905D | Servo Assembly, KM172/KM172-5 (1.955”OD & 3.056”OD) Aluminum Cover 1983-Up | — |
| 905 not on diagram | Part # 42905E | Servo Assembly, KM175-5/KM177-8 (1.872”OD & 3.252”OD) 1988-Up (Plastic Cover With 1 Wire Made To Cover) With Triangle… | — |
| 905 not on diagram | Part # 42905EA | Servo Assembly, KM175-5/KM177-8 (1.872”OD & 3.252”OD) 1988-Up (Plastic Cover With 1 Wire Made To Cover) With Round… | — |
| 905 not on diagram | Part # 42905EB | Servo Assembly, KM175-5/KM177-8 (1.872”OD & 3.252”OD) 1988-Up (Plastic Cover With Connector On Cover) No Wires… | — |
| 905 not on diagram | Part # 42905J | Servo Assembly, KM176-5 (1.770”OD & 3.056”OD) 1989-Up (Plastic Cover With 1 Prong Connector On Cover) No Wires… | — |
| 905 not on diagram | Part # 42905JA | Servo Assembly, KM176-5 (1.770”OD & 3.056”OD) 1989-Up (Plastic Cover With 1 Wire Made To Cover) With Triangle Connector… | — |
| 905 not on diagram | Part # 42905L | Servo Assembly, A4AF1/A4AF3 (1.770”OD & 3.056”OD) Plastic Cover With 1 Wire Made To Cover (With 1 Prong Connector) Non… | — |
| 905 not on diagram | Part # 42905LB | Servo Assembly, A4BF1/A4BF2 (1.872”OD & 3.252”OD) Plastic Cover With 1 Wire Made To Cover (With 1 Prong Connector) Non… | — |
| 905 not on diagram | Part # 42905M | Servo Assembly, F4A33/W4A33 (2.225”OD & 3.925”OD) Plastic Cover 1990-Up | — |
| 905 not on diagram | Part # 42905N | Servo Assembly, W4A32 (2.041”OD & 3.575”OD) Plastic Cover 1991-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 42500A | Pump, KM170 1979-86 | — |
| 500 not on diagram | Part # 42500B | Pump, KM171 Non Vented Body (Use With Vented Case) 1983-88 | — |
| 500 not on diagram | Part # 42500BA | Pump, KM171 With Vented Body (Use With Non Vented Case) 1983-88 | — |
| 500 not on diagram | Part # 42500C | Pump, KM175 Non Vented Body (Use With Vented Case) 1985-88 | — |
| 500 not on diagram | Part # 42500CA | Pump, KM175 With Vented Body (Use With Non Vented Case) 1985-88 | — |
| 500 not on diagram | Part # 42500D | Pump, KM172 Non Vented Body (Use With Vented Case) 1983-88 | — |
| 500 not on diagram | Part # 42500DA | Pump, KM172 With Vented Body (Use With Non Vented Case) 1983-88 | — |
| 500 not on diagram | Part # 42500E | Pump, KM175-5 1988-Up | — |
| 500 not on diagram | Part # 42500G | Pump, KM177-8 1989-Up | — |
| 500 not on diagram | Part # 42500H | Pump, KM171-5/KM176-5 (With 3 Rings On Input Shaft) (1 Bushing Direct Drum) 1989-Up | — |
| 500 not on diagram | Part # 42500L | Pump, A4AF1 (1 Bushing Direct Drum) 1991-99 (Ring Tower Measures 1 5/8” From Washer Surface To The End) | — |
| 500 not on diagram | Part # 42500LB | Pump, A4BF1 (2 Bushing Direct Drum) 1991-99 | — |
| 500 not on diagram | Part # 42500LC | Pump, A4BF2 (1 Bushing Direct Drum) 2000-Up (Ring Tower Measures 1 1/2” From Washer Surface To The End) | — |
| 500 not on diagram | Part # 42500LD | Pump, A4AF3 (1 Bushing Direct Drum) 2000-Up (Ring Tower Measures 1 5/16” From Washer Surface To The End) | — |
| 500 not on diagram | Part # 42500LE | Pump, A4BF3 (1 Caged Needle Bearing In Direct Drum) 2000-Up(Ring Tower Measures 1 5/16” From Washer Surface To The End)… | — |
| 500 not on diagram | Part # 42500M | Pump, F4A33/W4A33 (With 1 Ring On Input Shaft) 1990-Up | — |
| 500 not on diagram | Part # 42500MA | Pump, F4A33/W4A32/W4A33 (With 3 Rings On Input Shaft) (2 3/4” Long Stator Shaft) 1990-Up | — |
| 500 not on diagram | Part # 42500MB | Pump, F4A33/W4A32/W4A33 (With 3 Rings On Input Shaft) (2 1/2” Long Stator Shaft) 1990-Up | — |
| 500 not on diagram | Part # 42500P | Pump, KM177 (With 1 Ring Input Shaft) 1 Bushing Direct Drum 1987-88 | — |
| 500 not on diagram | Part # 42500Y | Pump, KM172-5 1989-Up | — |
| 510 not on diagram | Part # 42510B | Pump Body W/Gears, KM171/KM172/KM175 Non Vented (Use With Vented Case) 1983-88 | — |
| 510 not on diagram | Part # 42510BA | Pump Body W/Gears, KM171/KM172/KM175 Vented (Use With Non Vented Case) 1983-88 | — |
| 510 not on diagram | Part # 42510E | Pump Body W/Gears, KM171-5/KM175-5/KM176-5/KM177-8 1988-Up | — |
| 510 not on diagram | Part # 42510L | Pump Body W/Gears, A4AF1/ A4BF1 (13 Teeth Inner Pump Gear) 1991-99 | — |
| 510 not on diagram | Part # 42510LC | Pump Body W/Gears, A4AF3 / A4BF2 (11 Teeth Inner Pump Gear) 2000-Up | — |
| 510 not on diagram | Part # 42510M | Pump Body W/Gears, F4A33/W4A32/W4A33 1990-Up | — |
| 510 not on diagram | Part # 42510Y | Pump Body W/Gears, KM172-5 1989-Up | — |
| 520 | Part # 42520B | Stator, KM171/KM172/KM175 (With 3 Ring Input Shaft) Use With Vented Case 1983-88 | — |
| 520 | Part # 42520BA | Stator, KM171/KM172/KM175 (With 3 Ring Input Shaft) For Non Vented Case) 1983-88 | — |
| 520 | Part # 42520E | Stator, KM175-5/KM172-5 (With 3 Ring Input Shaft) 2 Bushing Direct Drum 1988-Up | — |
| 520 | Part # 42520G | Stator, KM177-8 (With 1 Ring On Input Shaft) 2 Bushing Direct Drum 1989-Up | — |
| 520 | Part # 42520H | Stator, KM171-5/KM176-5 (With 3 Rings On Input Shaft) 1 Bushing Direct Drum 1989-Up | — |
| 520 | Part # 42520HA | Stator, KM171-5 (With 1 Ring On Input Shaft) 1 Bushing Direct Drum 1989-Up | — |
| 520 | Part # 42520L | Stator, A4AF1 (1 Bushing Direct Drum) 1991-99 (Ring Tower Measures 1 5/8” From Washer Surface To The End) | — |
| 520 | Part # 42520LB | Stator, A4BF1 (2 Bushing Direct Drum) 1991-99 (Ring Tower Measures 1 7/8” From Washer Surface To The End) | — |
| 520 | Part # 42520LC | Stator, A4BF2 (1 Bushing Direct Drum) 2000-Up (Ring Tower Measures 1 1/2” From Washer Surface To The End) | — |
| 520 | Part # 42520LD | Stator, A4AF3 (1 Bushing Direct Drum) 2000-Up (Ring Tower Measures 1 5/16” From Washer Surface To The End)… | — |
| 520 | Part # 42520LE | Stator, A4BF3 (1 Caged Needle Bearing In Direct Drum) (Ring Tower Measures 1 5/16” From Washer Surface To The End)… | — |
| 520 | Part # 42520M | Stator, F4A33/W4A33 (With 1 Ring On Input Shaft) 1990-Up | — |
| 520 | Part # 42520MA | Stator, F4A33/W4A32/W4A33 (With 3 Rings On Input Shaft) 1990-Up (2 3/4” Long Shaft) | — |
| 520 | Part # 42520MB | Stator, F4A33/W4A32/W4A33 (With 3 Rings On Input Shaft) 1990-Up (2 1/2” Long Shaft) | — |
| 520 | Part # 42520P | Stator, KM177 (With 1 Ring Input Shaft) 1 Bushing Direct Drum 1987-88 | — |
| 530 | Part # 42530E | Pump Gears, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF | — |
| 530 | Part # 42530M | Pump Gears, W4A32/F4A33/W4A33 | — |
| 764 not on diagram | Part # 42764C | Plate, KM175 Pump Spacer To Case (16 Hole) Aluminum 1985-89 | — |
| 764 not on diagram | Part # 42764D | Plate, KM172 Pump Spacer To Case (15 Hole) Aluminum 1983-89 | — |
| 764 not on diagram | Part # 42764E | Plate, KM175-5 Pump Spacer To Case (Aluminum) 1988-Up | — |
| 764 not on diagram | Part # 42764G | Plate, KM177-8 Pump Spacer To Case (Aluminum) 1989-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 42100C | Friction, KM175/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/F4A33/W4A32/W4A33 Overdrive Clutch (.074”) (40 Teeth) 1985-Up | 1 |
| 100 | Part # 42100L | Friction, A4AF3 Overdrive Clutch (.065”) (36 Teeth) 2000-Up | — |
| 106 | Part # 42106A | Friction, KM171/KM172 Forward Clutch (.075”) (10 Teeth) 1982-88 | 1 |
| 106 | Part # 42106B | Friction, KM170/KM171/KM172/KM175/KM177 Forward & Direct Clutch (.075”) (38 Teeth) (5.000”OD) 1979-88 | 1 |
| 106 | Part # 42106E | Friction, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32 Forward & Direct Clutch (.075”)… | 1 |
| 106 | Part # 42106L | Friction, A4AF3/A4BF2/A4BF3 Forward Clutch (.066”) 38 Teeth (Eclipse) 2000-Up | — |
| 106 | Part # 42106M | Friction, F4A33/W4A33 Direct Clutch (.067”) (38 Teeth) (5 7/16”OD) 1990-Up | 1 |
| 106 | Part # 42106MC | Friction, F4A33/W4A33 Forward Clutch (.067”) (42 Teeth) (5 7/16”OD) 1990-Up | 1 |
| 114 | Part # 42114B | Friction, KM170/KM171/KM172/KM175 Low/Reverse Clutch (.072”) (48 Teeth) 1979-88 | 1 |
| 114 | Part # 42114E | Friction, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32 Low/Reverse Clutch (.071”) (51 Teeth)… | 1 |
| 114 | Part # 42114L | Friction, A4AF1/A4BF2/A4BF3 Low/Reverse Clutch (.071”) 51 Teeth (Eclipse) 2000-Up | — |
| 114 | Part # 42114M | Friction, F4A33/W4A33 Low/Reverse Clutch (.067”) (54 Teeth) (6 1/4”OD) 1990-Up | 1 |
| 119 not on diagram | Part # 42119E | Friction Module, KM175-5/KM176-5/KM177-8/A4AF1/A4AF2/A4BF1/W4A32 1988-Up | — |
| 119 not on diagram | Part # 42119H | Friction Module, KM171-5/KM172-5 1988-Up | — |
| 119 not on diagram | Part # 42119LD | Friction Module, A4AF3/A4BF2/A4BF3 2000-Up | — |
| 119 not on diagram | Part # 42119M | Friction Module, F4A33/W4A33 1990-Up | — |
| 120 | Part # 42120C | Steel, KM175/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/F4A33/W4A32/W4A33 Overdrive Clutch (.032”) (25 Teeth) 1985-Up | 1 |
| 120 | Part # 42120L | Steel, A4AF3 Overdrive Clutch (.097”) 25 Teeth (3.770”ID) 1993-Up | — |
| 120 | Part # 42120LD | Steel, A4BF Overdrive Clutch (.160”) 25 Teeth (3.770”ID) 2000-Up | — |
| 126 | Part # 42126B | Steel, KM170/KM171/KM172/KM175/KM177 Direct Clutch (.150”) (24 Teeth) (3.970”ID) 1979-88… | 1 |
| 126 | Part # 42126E | Steel, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32 Direct Clutch (.146”) (24 Teeth)… | 1 |
| 126 | Part # 42126G | Steel, F4A33 Direct Clutch (.120”) (24 Teeth) (4.117”ID) 1992-Up) | 1 |
| 126 | Part # 42126M | Steel, F4A33/W4A33 Direct Clutch (.088”) (26 Teeth) (4.115”ID) 1990-Up | 1 |
| 126 | Part # 42126MB | Steel, F4A33/W4A33 Direct Clutch (.150”) (26 Teeth) (4.115”ID) 1990-Up | — |
| 128 | Part # 42128A | Steel, KM170/KM171/KM172/KM175/KM177 Forward Clutch (.071”) (24 Teeth) (3.970”ID) 1979-88 | 1 |
| 128 | Part # 42128E | Steel, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32 Forward Clutch (.071”) (24 Teeth) (4.100”ID)… | 1 |
| 128 | Part # 42128L | Steel, A4AF3 Forward Clutch (.077”) 24 Teeth (4.100”ID) 1993-Up | — |
| 128 | Part # 42128LA | Steel, A4AF1/A4AF2/A4BF1 Forward Clutch (.087”)(24 Teeth)(4.100”ID) 1999-Up | — |
| 128 | Part # 42128M | Steel, F4A33/W4A33 Forward Clutch (.071”) (26 Teeth) (4.360”ID) 1990-Up | 1 |
| 134 | Part # 42134A | Steel, KM170 Low/Reverse Clutch (.071”) (6 Teeth) (5.00”ID) 1979-81 | 1 |
| 134 | Part # 42134B | Steel, KM171 Low/Reverse Clutch (.071”) (12 Teeth) (5.00”ID) 1982-84 | 1 |
| 134 | Part # 42134BB | Steel, KM172/KM175/KM177 Low/Reverse Clutch (.039”) (24 Teeth) (5.00”ID) 1984-88 | 1 |
| 134 | Part # 42134BC | Steel, KM171/KM172/KM175 Low/Reverse Clutch (.071”) (24 Teeth) (5.00”ID) 1985-88 | 1 |
| 134 | Part # 42134E | Steel, KM172-5/KM175-5/KM176-5/KM177-8/A4AF3 Low/Reverse Clutch (.039”) (20 Teeth) (5.300”ID) 1987-Up | 1 |
| 134 | Part # 42134H | Steel, KM171-5/KM176-5/A4AF1/A4BF1/A4BF2/W4A32 Low/Reverse Clutch (.071”) (20 Teeth)(5.300”ID) 1989-Up | 1 |
| 134 | Part # 42134M | Steel, F4A33/W4A33 Low/Reverse Clutch (.039”) (20 Teeth) (5.540”ID) 1990-Up | 1 |
| 134 | Part # 42134P | Steel, KM177 Low/Reverse Clutch (.039”) (24 Teeth) (5.300”ID) 1987-88 | 1 |
| 139 not on diagram | Part # 42139E | Steel Module, KM175-5/177-8 1988-Up | — |
| 139 not on diagram | Part # 42139H | Steel Module, KM171-5/172-5 1988-Up | — |
| 139 not on diagram | Part # 42139M | Steel Module, F4A33/W4A33 1990-Up | — |
| 140 | Part # 42140C | Pressure Plate, P.Plate, KM175/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/F4A33/ W4A32/W4A33 Overdrive Clutch (25 Teeth)… | — |
| 140 | Part # 42140L | Pressure Plate, A4AF3 Overdrive Clutch (25 Teeth) .177” (3.770”ID) 1993-Up | — |
| 146 | Part # 42146B | Steel, Km170/KM171/KM172/KM175/KM177 Direct Clutch (.150”) (24 Teeth) (3.970”ID) 1979-88 (Use 42126B) | 1 |
| 146 | Part # 42146E | Pressure Plate, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF/W4A32 Forward & Direct Clutch (.146”) (24 Teeth)… | — |
| 146 | Part # 42146EA | Pressure Plate, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/W4A32 Forward & Direct Clutch (.192”) (24 Teeth)… | — |
| 146 | Part # 42146L | Pressure Plate, A4AF3 Forward Clutch (.246”)(24 Teeth)(4.215”ID) | — |
| 146 | Part # 42146M | Pressure Plate, F4A33/W4A33 Direct Clutch (.195”) (26 Teeth) (4.120”ID) 1990-Up | — |
| 148 | Part # 42148M | Pressure Plate, F4A33/W4A33 Forward Clutch (.240”) (26 Teeth) (Stepped) 1990-Up | — |
| 149 not on diagram | Part # 42149B | Apply Plate, KM170/KM171/KM172/KM175/KM177 Forward Clutch (Bottom) (.195”) (24 Teeth) (4.00”ID) (Beveled) 1979-88 | 1 |
| 149 not on diagram | Part # 42149E | Pressure Plate, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32 Forward Beveled (24 Teeth) .195”… | 1 |
| 149 not on diagram | Part # 42149M | Pressure Plate, F4A33/W4A33 Forward Clutch (26 Teeth) .160” (Stepped) Bottom 1990-Up | — |
| 154 | Part # 42154A | Pressure Plate, KM170 Low/Reverse Clutch (.150”) (6 Teeth) (5.00”ID) 1979-81 | — |
| 154 | Part # 42154B | Pressure Plate, KM171/KM172/KM175 Low/Reverse Clutch (.145”) (12 Teeth) (5.00”ID) 1982-88 | — |
| 154 | Part # 42154E | Pressure Plate, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/ W4A32 Low/Reverse Clutch (.145”)… | — |
| 154 | Part # 42154G | Pressure Plate, KM177-8 Low/REverse Clutch (20 Teeth) .100” Thick (5.300”ID) 1989-Up | — |
| 154 | Part # 42154M | Pressure Plate, F4A33/W4A33 Low/Reverse Clutch (.160”) (20 Teeth) (5.540”ID) 1990-Up | — |
| 154 | Part # 42154P | Pressure Plate, KM177 Low/Reverse Clutch (.166”) (20 Teeth) (5.540”ID) 1988 | — |
| 155 | Part # 42155A | Apply Plate, KM170 Low/Reverse Clutch (.150”) (6 Teeth) (5.00”ID) 1979-83 | — |
| 155 | Part # 42155B | Apply Plate, KM171/KM172/KM175 Low/Reverse Clutch (.220”) (12 Teeth) (5.00”ID) (Beveled) 1982-88 | 1 |
| 155 | Part # 42155E | Apply Plate, KM171-5/KM172-5/KM175-5/KM176-5/A4AF1/A4AF3/A4BF1/A4BF2/W4A32 Low/Reverse Clutch (.245”) (20 Teeth)… | — |
| 155 | Part # 42155EA | Apply Plate, KM171-5/KM172-5/KM175-5/KM176-5/A4AF1/A4AF3/A4BF1/A4BF2/W4A32 Low/Reverse Clutch (.155”) (20 Teeth)… | — |
| 155 | Part # 42155M | Apply Plate, F4A33/W4A33 Low/Reverse Clutch (.255”) (20 Teeth) (5.540”ID) (Beveled) 1990-Up | — |
| 858 | Part # 42858M | Wave Plate, F4A33 Forward Clutch (Bottom) 7 Tab | — |
| 960 | Part # 42960C | Piston, KM175 Overdrive Clutch 1985-89 | — |
| 960 | Part # 42960E | Piston, KM175-5/KM176-5 Overdrive Clutch 1988-Up | — |
| 960 | Part # 42960G | Piston, KM177-8/A4BF1/A4BF2 Overdrive Clutch (Steel) 1988-Up | — |
| 960 | Part # 42960LB | Piston, A4AF3 Overdrive Clutch (Aluminum) | — |
| 960 | Part # 42960M | Piston, F4A33/W4A32/W4A33 Overdrive 1990-Up | — |
| 967 | Part # 42967B | Piston, KM171 Low/Reverse Clutch 1983-88 | — |
| 967 | Part # 42967C | Piston, KM172/KM175 Low/Reverse Clutch 1983-89 | — |
| 967 | Part # 42967E | Piston, KM172-5/KM175-5/KM177-8/A4BF1/A4BF2/W4A32 Low/Reverse Clutch 1988-Up | — |
| 967 | Part # 42967H | Piston, KM171-5/KM176-5/A4AF1/A4AF3/F4A32 Low/Reverse Clutch 1989-Up | — |
| 967 | Part # 42967M | Piston, F4A33/W4A33 Low/Reverse Clutch 1990-Up | — |
| 970 | Part # 42970C | Spring, KM175 Overdrive Clutch Return 1985-89 | — |
| 970 | Part # 42970E | Spring, KM175-5/KM176-5 Overdrive Clutch Return 1988-Up | — |
| 970 | Part # 42970G | Spring, KM177-8/A4BF1/A4BF2 Overdrive Clutch Return 1989-Up | — |
| 970 | Part # 42970LB | Springs W/Retainer, A4AF3 Overdrive Clutch Return (16 Springs) | — |
| 970 | Part # 42970M | Spring, F4A33/W4A32/W4A33 Overdrive Clutch Return 1990-Up | — |
| 974 | Part # 42974B | Return Spring, KM171/KM172 Forward Clutch 1983-88 | — |
| 974 | Part # 42974C | Return Spring, KM175 Forward Clutch 1985-89 | — |
| 974 | Part # 42974E | Return Spring, KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/W4A32 Forward Clutch 1988-Up | — |
| 974 | Part # 42974H | Return Spring, KM171-5/KM172-5 Forward Clutch 1989-Up | — |
| 974 | Part # 42974L | Return Spring, A4AF3 Forward Clutch (19 Coil Springs) | — |
| 974 | Part # 42974M | Return Spring, F4A33/W4A33 Forward Clutch 1990-Up | — |
| 975 | Part # 42975B | Return Spring, KM171/KM172/KM175 Direct Clutch (1 Coil Spring) 1983-89 | — |
| 975 | Part # 42975E | Return Spring Set, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2W4A32 Direct Clutch (23 Coil Springs)… | — |
| 975 | Part # 42975L | Return Spring Set, A4AF3 Direct Clutch (23 Coil Springs)(2.535”ID) | — |
| 975 | Part # 42975M | Return Spring Set, F4A33/W4A33 Direct Clutch (23 Coil Springs) 1992-Up | — |
| 977 | Part # 42977M | Cushion, F4A33/W4A33 Low/Reverse Clutch (6 3/8”OD) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 550 | Part # 42550C | Drum, KM175 Overdrive (3 Clutch) (1 Groove On ID) 1985-89 | — |
| 550 | Part # 42550E | Drum, KM175-5/KM176-5/A4AF1 Overdrive (3 Clutch) (Stepped Lugs On OD) (1 1/8”Tall) | — |
| 550 | Part # 42550EA | Drum, KM175-5/KM176-5 Overdrive (3 Clutch) (Lugs On OD Are Not Stepped) | — |
| 550 | Part # 42550G | Drum, KM177-8/F4A23 Overdrive (4 Clutch) (Stepped Lugs On OD) | — |
| 550 | Part # 42550GA | Drum, KM177-8/A4BF1/A4BF2 Overdrive (4 Clutch)(Lugs On OD Are Not Stepped)(1 1/4”Tall) | — |
| 550 | Part # 42550L | Drum, A4BF Overdrive (3 Clutch) (1 Groove On OD)(1 5/8” Tall) | — |
| 550 | Part # 42550LA | Drum, A4AF3 Overdrive (5 Clutch)(No Groove On OD)(1 3/4” Tall) | — |
| 550 | Part # 42550M | Drum, F4A33/W4A32/W4A33 Overdrive (4 Clutch) (1.230”ID Piston) 1990-Up | — |
| 554 | Part # 42554BK | Drum, KM171 Forward With Input Shaft (2 Clutch) | — |
| 554 | Part # 42554C | Drum, KM175 Forward Without Shaft (3 Clutch) 5 5/8”OD 1985-89 | — |
| 554 | Part # 42554DK | Drum, KM172 Forward With Input Shaft (3 Clutch) | — |
| 554 | Part # 42554E | Drum, KM175-5 / (KM177-8 Some) / A4BF1 Forward Without Shaft (3 Clutch) 5 5/8”OD (.640” Tall Inner Piston Hub) 1988-Up | — |
| 554 | Part # 42554G | Drum, KM177-8 (Some) Forward Without Shaft (3 Clutch) 5 5/8”OD (.570” Tall Inner Piston Hub) 1994-Up | — |
| 554 | Part # 42554H | Drum, KM171-5 Forward Without Shaft (2 Clutch) (5 5/8”OD) 1989-Up | — |
| 554 | Part # 42554HK | Drum, KM171-5 Forward With 3 Ring Input Shaft (2 Clutch) (5 5/8”OD) 1989-Up | — |
| 554 | Part # 42554J | Drum, KM176-5/A4AF1 Forward Without Shaft (2 Clutch) (5 5/8”OD) 1989-Up | — |
| 554 | Part # 42554L | Drum, A4BF2 Forward Without Shaft (5 Clutch) (5 1/2”OD) (With 1” Tall Inner Piston Hub) 2000-Up | — |
| 554 | Part # 42554LA | Drum, A4AF3 Forward Without Shaft (4 Clutch) (5 1/2”OD) (With 7/8” Tall Inner Piston Hub) 2000-Up | — |
| 554 | Part # 42554M | Drum, F4A33/W4A33 Forward Without Shaft (5 Clutch) 6”OD 1990-Up | — |
| 554 | Part # 42554YK | Drum, KM172-5 Forward With Input Shaft (3 Clutch) 1989-Up | — |
| 555 | Part # 42555B | Drum, KM171 Direct (2 Clutch) 4.50”OD Piston (8 Lugs) 1983-88 | — |
| 555 | Part # 42555BA | Drum, KM171 Direct (2 Clutch) 5.00”OD Piston (8 Lugs) 1983-88 | — |
| 555 | Part # 42555C | Drum, KM175 Direct (3 Clutch) 1 3/4” Tall (1 Bushing) 1985-89 | — |
| 555 | Part # 42555D | Drum, KM172 Direct (3 Clutch) 1 1/2” Tall (1 Bushing) 1983-89 (Has A .085” Snap Ring Groove For Snap Ring # 879) | — |
| 555 | Part # 42555DA | Drum, KM172 Direct (3 Clutch) 1 1/2” Tall (1 Bushing) 1983-89 (Has A .060” Snap Ring Groove For Snap Ring # 879) | — |
| 555 | Part # 42555E | Drum, KM175-5/KM177-8/A4BF1 Direct (3 Clutch) 1 5/8” Tall (2 Bushing) 1988-Up | — |
| 555 | Part # 42555H | Drum, KM171-5/KM176-5/A4AF Direct (2 Clutch) 1 Bushing (12 Lugs) 1989-Up | — |
| 555 | Part # 42555L | Drum, A4AF3 Direct Clutch (2 Clutch)(1.325” Tall)(1 Bushing 5/16” Wide)(Lugs Are 1/4” Down From The Top Of Drum)… | — |
| 555 | Part # 42555LA | Drum, A4BF3 Direct Clutch (3 Clutch)(1.550” Tall)(1 Bushing 1/2” Wide)(Lugs Are 1/2” Down From The Top Of Drum) 2000-Up | — |
| 555 | Part # 42555LE | Drum, A4BF3 Direct Clutch (2 Clutch)(1.325” Tall)(1 Caged Needle Bearing Inside Instead Of A Bushing) | — |
| 555 | Part # 42555M | Drum, F4A33/W4A33 Direct (4 Clutch) 2 Bushings 1990-Up | — |
| 555 | Part # 42555Y | Drum, KM172-5 Direct (3 Clutch) 1 1/2” Tall (2 Bushing) 1989-Up | — |
| 570 | Part # 42570C | Clutch Hub, KM175 Overdrive (2 Clutch) 26 Splines 1985-89 | — |
| 570 | Part # 42570E | Clutch Hub, KM171-5/KM176-5/A4AF1/(A4BF1/A4BF2 Some) Overdrive (3 Clutch)(27 Splines) (4.030”OD)(40 Teeth Clutch Hub)… | — |
| 570 | Part # 42570G | Clutch Hub, KM177-8/W4A32 Overdrive (4 Clutch) 27 Splines (.930” Tall) 1989-Up | — |
| 570 | Part # 42570L | Clutch Hub, A4AF3 (A4BF1/A4BF2 Some) Overdrive (4 Clutch)(3.660”OD)(36 Teeth Clutch Hub) 2000-Up | — |
| 570 | Part # 42570M | Clutch Hub, F4A33/W4A33 Overdrive (4 Clutch) 40 Teeth (4.030”OD)1990-Up | — |
| 574 | Part # 42574B | Clutch Hub, KM171 Forward (10 Teeth) 1983-88 | — |
| 574 | Part # 42574BA | Clutch Hub, KM171 Forward (38 Teeth) 1983-88 | — |
| 574 | Part # 42574C | Clutch Hub, Km172/KM175 Forward (38 Teeth) 1983-89 | — |
| 574 | Part # 42574E | Clutch Hub, KM172-5/KM177-5/Some KM177-8/A4BF1/A4BF2/W4A32 Forward (38 Teeth) 1988-Up | — |
| 574 | Part # 42574G | Clutch Hub, Some KM177-8 Forward (38 Teeth) With 4.060”OD At Friction Splines | — |
| 574 | Part # 42574H | Clutch Hub, KM171-5/KM176-5/A4AF Forward (38 Teeth) 1989-Up | — |
| 574 | Part # 42574L | Clutch Hub, A4BF2 Forward (38 Teeth)(5 Clutch)(1.510” Overall Height)(.960”Thick At Friction Splines) | — |
| 574 | Part # 42574LA | Clutch Hub, A4AF3 Forward (38 Teeth)(4 Clutch)(1.190” Overall Height)(.775” Thick At Friction Splines) | — |
| 574 | Part # 42574M | Clutch Hub, F4A33/W4A33 Forward (42 Teeth) 5 Clutch (27 Splines) 1.580” Tall 1990-Up | — |
| 584 | Part # 42584BK | Planet W/Sprag, KM171 1983-88 | — |
| 584 | Part # 42584CA | Planet W/Sprag, KM175 (Has A 29 Tooth Forward Sun Gear) 1985-89 | — |
| 584 | Part # 42584CK | Planet W/Sprag, KM175 (Has A 26 Tooth Forward Sun Gear) 1985-89 | — |
| 584 | Part # 42584DAK | Planet W/Sprag, KM172 (13/16” Thick Low/Reverse Clutch Hub) 1983-88 | — |
| 584 | Part # 42584DK | Planet W/Sprag, KM172 (15/16” Thick Low/Reverse Clutch Hub) 1983-88 | — |
| 584 | Part # 42584EAK | Planet W/Sprag, KM175-5 (22 Teeth On Short Gears With 1 Groove) 1988-Up | — |
| 584 | Part # 42584EBK | Planet W/Sprag, KM175-5 (19 Teeth On Short Gears With 1 Groove) 1988-Up | — |
| 584 | Part # 42584EK | Planet W/Sprag, KM175-5 (22 Teeth On Short Gears With No Groove) 1988-Up | — |
| 584 | Part # 42584GAK | Planet W/Sprag, KM177-8/W4A32 (With 1 Groove On Short Gears) 1989-Up | — |
| 584 | Part # 42584GK | Planet W/Sprag, KM177-8 (No Groove On Short Gears) 1989-Up | — |
| 584 | Part # 42584HK | Planet W/Sprag, KM171-5 1989-Up | — |
| 584 | Part # 42584JK | Planet W/Sprag, KM176-5/A4AF 1989-Up | — |
| 584 | Part # 42584MK | Planet W/Sprag, F4A33/W4A33 1990-Up | — |
| 584 | Part # 42584YK | Planet W/Sprag, KM172-5 1989-Up | — |
| 594 | Part # 42594B | Ring Gear, All KM (Except F4A33/W4A33) Annulus (74 Teeth)(22 Outer Lugs)(5 1/4”OD) | — |
| 594 | Part # 42594M | Ring Gear, F4A33/W4A33 Annulus (5 7/8”OD) 1990-Up | — |
| 604 | Part # 42604LB | Hub, A4AF3 Annulus Gear (2.550” Overall Height)(3/4” Spline Length)(Uses A Nut To Hold On The Gear) | — |
| 604 | Part # 42604LC | Hub, A4BF1/A4BF2 Annulus Gear (2.940” Overall Height)(1 1/8” Spline Length)(Uses A Snap Ring To Hold On The Gear) | — |
| 605 not on diagram | Part # 42605B | Hub, KM171 Annulus With 22 Teeth Gear & Ball Bearings 1983-88 | — |
| 605 not on diagram | Part # 42605C | Hub, KM175 Annulus With 20 Teeth Gear & Ball Bearings 1985-89 | — |
| 605 not on diagram | Part # 42605D | Hub, KM172 Annulus With 20 Teeth Gear & Ball Bearings 1983-88 | — |
| 605 not on diagram | Part # 42605E | Hub, KM175-5/KM176-5 Annulus With 24 Teeth Gear & Ball Bearings (No Groove) 1988-Up | — |
| 605 not on diagram | Part # 42605EA | Hub, KM175-5/KM176-5 Annulus With 24 Teeth Gear & Ball Bearings (1 Groove) 1988-Up | — |
| 605 not on diagram | Part # 42605EB | Hub, KM175-5/KM176-5 Annulus With 24 Teeth Gear & Ball Bearings (2 Groove) 1988-Up | — |
| 605 not on diagram | Part # 42605G | Hub, KM177-8 Annulus With 24 Teeth Gear & Ball Bearings (No Groove) 1989-Up | — |
| 605 not on diagram | Part # 42605GA | Hub, KM177-8 Annulus With 24 Teeth Gear & Ball Bearings (1 Groove) 1989-Up | — |
| 605 not on diagram | Part # 42605H | Hub, KM171-5 Annulus With 24 Teeth Gear & Ball Bearings 1989-Up | — |
| 605 not on diagram | Part # 42605L | Hub, A4AF1 Annulus With 58 Teeth Gear & Ball Bearings 1991-Up | — |
| 605 not on diagram | Part # 42605LB | Hub, A4AF3 (No Longer Available) Use 42604LB & 42710LB | — |
| 605 not on diagram | Part # 42605LC | Hub, A4BF1/A4BF2 (No Longer Available) Use 42604LC & 42710LC | — |
| 605 not on diagram | Part # 42605M | Hub, F4A33 Annulus With 35 Teeth Gear (3.680”OD) And Ball Bearings 1990-Up | — |
| 605 not on diagram | Part # 42605MA | Hub, F4A33/W4A32/W4A33 Annulus With 35 Teeth Gear (3.705”OD) And Ball Bearings 1990-Up | — |
| 605 not on diagram | Part # 42605Y | Hub, KM172-5 Annulus With 23 Teeth Gear & Ball Bearings 1989-Up | — |
| 612 | Part # 42612B | Sun Gear, KM171 Forward (26 Teeth) 3.780” Long 1983-88 | — |
| 612 | Part # 42612C | Sun Gear, KM175 Forward (26 Teeth) 3.195” Long (1.020”OD Of Shaft) 1985-89 | — |
| 612 | Part # 42612CA | Sun Gear, KM175 Forward (29 Teeth) 3.195” Long (1.020”OD Of Shaft) 1985-89 | — |
| 612 | Part # 42612D | Sun Gear, KM172 Forward (26 Teeth) 3.930” Long 1983-88 | 1 |
| 612 | Part # 42612DA | Sun Gear, KM172 Forward (29 Teeth) 3.760” Long 1983-88 | — |
| 612 | Part # 42612E | Sun Gear, KM175-5 Forward (26 Teeth) 3.195” Long (1.095”OD Of Shaft) 1.610”OD Of Gear (No Groove) 1988-Up | 1 |
| 612 | Part # 42612EA | Sun Gear, KM175-5 Forward (26 Teeth) 3.195” Long (1.095”OD Of Shaft) 1.610”OD Of Gear (1 Groove) 1988-Up | — |
| 612 | Part # 42612EB | Sun Gear, KM175-5 Forward (26 Teeth) 3.195” Long (1.095”OD Of Shaft) 1.775”OD Of Gear (1 Groove) 1988-Up | — |
| 612 | Part # 42612G | Sun Gear, KM177-8 Forward (29 Teeth) 3.195” Long (No Groove) 1989-Up | — |
| 612 | Part # 42612GA | Sun Gear, KM177-8/W4A32 Forward (29 Teeth) 3.195” Long (1 Groove) 1989-Up | — |
| 612 | Part # 42612H | Sun Gear, KM171-5 Forward (26 Teeth) 3.740” Long 1989-Up | 1 |
| 612 | Part # 42612J | Sun Gear, KM176-5 Forward (26 Teeth) 3.010” Long 1989-Up | 1 |
| 612 | Part # 42612LA | Sun Gear, A4AF3 Forward (26 Teeth)(3.040” Long) | — |
| 612 | Part # 42612LB | Sun Gear, A4BF1/A4BF2 Forward (29 Teeth)(1 Groove)(3.222” Long) | — |
| 612 | Part # 42612M | Sun Gear, F4A33/W4A33 Forward (29 Teeth) 3.435” Long 1990-Up | — |
| 612 | Part # 42612Y | Sun Gear, KM172-8 Forward (26 Teeth) 3.925” Long 1989-Up | — |
| 614 | Part # 42614B | Sun Gear, KM171 Reverse (34 Teeth) 2.075” Long (No Groove) 1983-88 | — |
| 614 | Part # 42614C | Sun Gear, KM175 Reverse (34 Teeth) 2.275” Long (2 Grooves) With Snap Ring 1985-88 | — |
| 614 | Part # 42614D | Sun Gear, KM175 Reverse (34 Teeth) 2.275” Long (No Grooves) With Snap Ring 1985-88 | 1 |
| 614 | Part # 42614DA | Sun Gear, KM172 Reverse (34 Teeth) 2.075” Long 1983-88 | — |
| 614 | Part # 42614E | Sun Gear, KM175-5 Reverse (34 Teeth) 2.265” Long (No Groove) Takes 1 Snap Ring And 1 Sealing Ring 1988-Up | 1 |
| 614 | Part # 42614EA | Sun Gear, KM175-5/A4BF1/A4BF2 Reverse (34 Teeth) 2.265” Long (1 Groove In Middle) Takes 1 Snap Ring And 1 Sealing Ring… | — |
| 614 | Part # 42614GA | Sun Gear, KM177-8 Reverse (34 Teeth) 2.265” Long (1 Groove At Edge) Takes 1 Snap Ring And 1 Sealing Ring 1989-Up | 1 |
| 614 | Part # 42614GB | Sun Gear, KM177-8 Reverse (34 Teeth) 2.265” Long (No Groove) Takes 1 Snap Ring And 1 Sealing Ring 1989-Up | — |
| 614 | Part # 42614H | Sun Gear, KM171-5/KM176-5/A4AF1/A4AF3 Reverse (34 Teeth) 2.080” Long (Takes 1 Snap Ring And 1 Sealing Ring 1989-Up | 1 |
| 614 | Part # 42614M | Sun Gear, F4A33/W4A33 Reverse (34 Teeth) 2.305” Long (Takes 1 Sealing Ring) 1990-Up | 1 |
| 614 | Part # 42614Y | Sun Gear, KM172-5 Reverse (34 Teeth) 2.265” Long (Takes 1 Snap Ring & 1 Sealing Ring) 1989-Up | — |
| 622 | Part # 42622B | Shell, KM171 (Kickdown Drum) 1983-88 | — |
| 622 | Part # 42622C | Shell, KM172/KM175/KM177 (Kickdown Drum) 1983-89 | — |
| 622 | Part # 42622E | Shell, KM172-5/KM175-5/KM177-8/A4BF1/A4BF2/F4A32/W4A32 1989-Up (3 7/8” Overall Height) | — |
| 622 | Part # 42622H | Shell, KM171-5/KM176-5/A4AF1/A4AF3 (3 1/2” Overall Height) 1989-Up | — |
| 622 | Part # 42622M | Shell, F4A33/W4A33 (4 1/8” Overall Height) 1990-Up | — |
| 630 | Part # 42630B | Center Support, KM171/KM172 Some (Aluminum) 2.080” Wide (24 Teeth Steels) 1 Bushing 1983-88 | — |
| 630 | Part # 42630C | Center Support, KM175/KM172 Some (Aluminum) 2.275” Wide (24 Teeth Steels) 2 Bushings 1983-89 | — |
| 630 | Part # 42630E | Center Support, KM172-5/KM175-5/KM177-8/A4BF1/A4BF2/W4A32 (Steel)(1.585” Overall Thickness) 1988-Up… | — |
| 630 | Part # 42630H | Center Support, KM171-5/KM176-5/A4AF1/A4AF3 (Steel)(1.460” Overall Thickness) 1989-Up… | — |
| 630 | Part # 42630M | Center Support, F4A33/W4A33 (Steel 1.535” Overall Thickness) 1990-Up (With The Support Laying On A Flat Surface… | — |
| 654 | Part # 42654B | Sprag, KM170/KM171 Low/Reverse (26 Lug) Narrow 1983-88 | 1 |
| 654 | Part # 42654C | Sprag, KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF/W4A32 Low/Reverse (26 Lug) Wide (Use 74658) 1983-Up | — |
| 654 | Part # 42654L | Sprag, KM176-5/A4AF3 Low/Reverse (26 Lugs)(.622”Thick) | — |
| 654 | Part # 42654M | Sprag, F4A33/W4A33 Low/Reverse (28 Lug) 1990-Up | — |
| 670 | Part # 42670B | Input Shaft, KM171/KM172/KM171-5/KM172-5 (Sold With Forward Drum) | — |
| 670 | Part # 42670C | Input Shaft, KM175 (14 3/4” Long) 3 Ring (24 Spline) 1985-89 | — |
| 670 | Part # 42670CA | Input Shaft, KM175 (14 15/16” Long) 3 Ring (24 Spline) 1985-89 | — |
| 670 | Part # 42670E | Input Shaft, KM175-5/A4BF1 (15 1/8” Long) 3 Ring (11/16”OD Of Rear Pilot) 1988-Up | — |
| 670 | Part # 42670EA | Input Shaft, KM175-5/W4A32 (15 1/8” Long) 3 Ring (1/2”OD Rear Pilot) 1988-Up | — |
| 670 | Part # 42670EB | Input Shaft, KM175-5/Some 177-8 (15 7/16” Long) 3 Ring (1/2”OD Rear Pilot) 1988-Up | — |
| 670 | Part # 42670G | Input Shaft, KM177-8 (15 7/16” Long) 1 Ring (11/16”OD Rear Pilot) 1989-Up | — |
| 670 | Part # 42670J | Input Shaft, KM176-5/A4AF1 (14 1/2” Long) 3 Ring (11/16”OD Rear Pilot) 1990-Up (With 1 O-Ring On Shaft Under Drum) | — |
| 670 | Part # 42670JA | Input Shaft, A4AF3 (14 1/2” Long) 3 Ring (11/16”OD Rear Pilot) 1990-Up (With 2 O-Rings On Shaft Under Drum) | — |
| 670 | Part # 42670L | Input Shaft, A4BF2 (15 1/8” Long) 3 Ring (11/16”OD Rear Pilot) 1990-Up (With 2 O-Rings On Shaft Under Drum) | — |
| 670 | Part # 42670M | Input Shaft, F4A33/W4A33 (16 11/16” Long) 3 Ring 1990-Up | — |
| 670 | Part # 42670MA | Input Shaft, F4A33/W4A33 (16 1/16” Long) 1 Ring 1990-Up | — |
| 670 | Part # 42670MB | Input Shaft, F4A33/W4A33 (16 5/8” Long) 3 Ring (.670”OD Rear Pilot) 1990-Up | — |
| 670 | Part # 42670MC | Input Shaft, F4A33/W4A33 (16 5/8” Long) 3 Ring (.510”OD Rear Pilot) 1990-Up | — |
| 670 | Part # 42670P | Input Shaft, KM177 (1 Ring) 1987-88 | — |
| 675 | Part # 42675C | Shaft, KM175 Overdrive (26 Spline) 3.060” Long 1985-89 | — |
| 675 | Part # 42675E | Shaft, KM175-5/KM176-5/A4AF1/A4AF3/W4A32 Overdrive (27 Spline)(3.065” Long)1988-Up | — |
| 675 | Part # 42675G | Shaft, KM177-8 Overdrive (27 Spline) 3.340” Long (The Splines On The Overdrive End Are 3/4” Long) 1989-Up | — |
| 675 | Part # 42675L | Shaft, A4BF1/A4BF2 Overdrive (27 Spline) 2.914” Long | — |
| 675 | Part # 42675M | Shaft, F4A33/W4A33 Overdrive (27 Spline) 3.340” Long (The Splines On The Overdrive End Are 15/16” Long) 1990-Up | — |
| 677 | Part # 42677M | Output Shaft, W4A32/W4A33 Rear (15 1/2” Long) 1990-Up | — |
| 679 | Part # 42679B | Idler Shaft, KM171/KM171-5/KM175-5/KM176-5 (1.175”OD) 2.740” Long 1983-Up | — |
| 679 | Part # 42679C | Idler Shaft, KM172/KM175 (1.375”OD) 1983-89 | — |
| 679 | Part # 42679G | Idler Shaft, KM177-8 (1.175”OD) 3.085” Long 1989-Up | — |
| 679 | Part # 42679M | Idler Shaft, F4A33/W4A33 (1.175”OD) 3.110” Long 1990-Up | — |
| 679 | Part # 42679Y | Idler Shaft, KM172-5/W4A32 (1.175”OD) 2.725” Long 1989-Up | — |
| 686 not on diagram | Part # 42686B | Cover, KM171/KM172/KM175 Pinion Shaft (Tin) 3.130”OD 1983-89 | — |
| 686 not on diagram | Part # 42686E | Cover, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8 Pinion Shaft (Tin) 3.330”OD 1988-Up | — |
| 691 not on diagram | Part # 42691B | Cover, KM171/KM171-5 Output Gear (Aluminum) | — |
| 691 not on diagram | Part # 42691D | Cover, KM172 Output Gear (Cast Iron) | — |
| 710 | Part # 42710B | Gear, KM171 Transfer Drive (22 Teeth) No Groove 1983-88 | — |
| 710 | Part # 42710C | Gear, KM175 Transfer Drive (20 Teeth) 1 Groove 1985-89 | — |
| 710 | Part # 42710D | Gear, KM172 Transfer Drive (20 Teeth) No Groove 1983-88 | — |
| 710 | Part # 42710E | Gear, KM175-5/KM176-5 Transfer Drive (24 Teeth) No Groove (1.020” Thick) 1988-Up | — |
| 710 | Part # 42710EA | Gear, KM175-5 Transfer Drive (24 Teeth) 2 Groove 1988-Up | — |
| 710 | Part # 42710G | Gear, KM177-8 Transfer Drive (24 Teeth) No Groove (1.220” Thick) 1989-Up | — |
| 710 | Part # 42710H | Gear, KM171-5 Transfer Drive (24 Teeth) 1 Groove 1989-Up | — |
| 710 | Part # 42710L | Gear, A4AF1 Transfer Drive (58 Teeth) No Groove 1991-Up | — |
| 710 | Part # 42710LB | Gear, A4AF3/A4BF2 Transfer Drive (53 Teeth) No Groove (Right Angled) (With 1 Bearing & 4 Bolt Flange) | — |
| 710 | Part # 42710LBA | Gear, A4AF3/A4BF2 Transfer Drive (53 Teeth) 1 Groove (Right Angled)(With 1 Bearing & With 4 Bolt Flange) | — |
| 710 | Part # 42710LC | Gear, A4BF1 Transfer Drive (53 Teeth) No Groove (Right Angled) (With Ball Bearing On Each Side Of Gear) | — |
| 710 | Part # 42710M | Gear, F4A33 Transfer Drive (35 Teeth) No Groove 1990-Up | — |
| 710 | Part # 42710MA | Gear, W4A32/W4A33 Transfer Drive (35 Teeth) 1 Groove 1990-Up | — |
| 710 | Part # 42710Y | Gear, KM172-5 Transfer Drive (23 Teeth) 1 Groove 1989-Up | — |
| 712 | Part # 42712B | Gear, KM171 Driven Transfer (25 Teeth) No Groove 1983-88 | — |
| 712 | Part # 42712C | Gear, KM175 Driven Transfer (23 Teeth) 2 Grooves 1985-89 | — |
| 712 | Part # 42712D | Gear, KM172 Driven Transfer (23 Teeth) No Groove 1983-88 | — |
| 712 | Part # 42712DA | Gear, KM172 Driven Transfer (23 Teeth) 1 Groove 1983-88 | — |
| 712 | Part # 42712E | Gear, KM175-5/KM176-5 Driven Transfer (27 Teeth) No Groove 1988-Up | — |
| 712 | Part # 42712EA | Gear, KM175-5 Driven Transfer (27 Teeth) 2 Groove 1988-Up | — |
| 712 | Part # 42712EB | Gear, KM175-5 Driven Transfer (27 Teeth) 1 Groove (.940” Thick) 1988-Up | — |
| 712 | Part # 42712G | Gear, KM177-8 Driven Transfer (27 Teeth) No Groove (1.140” Thick) 1989-Up | — |
| 712 | Part # 42712GA | Gear, KM177-8 Driven Transfer (27 Teeth) 1 Groove (1.140” Thick) 1989-Up | — |
| 712 | Part # 42712H | Gear, KM171-5/KM172-5 Driven Transfer (27 Teeth) 1 Groove (.900” Thick) 1989-Up | — |
| 712 | Part # 42712L | Gear, A4AF1 Driven Transfer (60 Teeth)(No Groove) 1991-Up | — |
| 712 | Part # 42712LA | Gear, A4AF3 Driven Transfer (55 Teeth)(1 Groove In Center Of Gear) | — |
| 712 | Part # 42712LB | Gear, A4BF1/A4BF2 Driven Transfer (55 Teeth)(No Groove) | — |
| 712 | Part # 42712LC | Gear, A4AF3 Driven Transfer (55 Teeth)(1 Groove On Bearing Side Of Gear) | — |
| 712 | Part # 42712M | Gear, F4A33 Driven Transfer (Is Made On The Pinion #730) 1990-Up | — |
| 712 | Part # 42712MA | Gear, W4A33 Driven Transfer (43 Teeth) 1 Groove (1.100” Thick) 1990-Up | — |
| 712 | Part # 42712N | Gear, W4A32 Driven Transfer (43 Teeth) 1 Groove (.860” Thick) 1991-Up | — |
| 714 | Part # 42714B | Idler Gear, KM171 (34 Teeth) No Groove 1983-88 | — |
| 714 | Part # 42714C | Idler Gear, KM175 (30 Teeth) 1 Groove 1985-89 | — |
| 714 | Part # 42714D | Idler Gear, KM172 (30 Teeth) No Groove 1983-88 | — |
| 714 | Part # 42714E | Idler Gear, KM175-5/KM176-5 (32 Teeth) No Groove (.930” Thick) 1988-Up | — |
| 714 | Part # 42714EA | Idler Gear, KM175-5 (32 Teeth) 2 Groove (.930” Thick) 1988-Up | — |
| 714 | Part # 42714EB | Idler Gear, KM175-5/KM176-5 (32 Teeth) 1 Groove (.930” Thick) 3.575”OD 1988-Up | — |
| 714 | Part # 42714G | Idler Gear, KM177-8 (32 Teeth) NO Groove (1.115” Thick) 1989-Up | — |
| 714 | Part # 42714GA | Idler Gear, KM177-8 (32 Teeth) 1 Groove (1.115” Thick) 1989-Up | — |
| 714 | Part # 42714H | Idler Gear, KM171-5 (32 Teeth) 1 Groove (.874” Thick) 1989-Up | — |
| 714 | Part # 42714HA | Idler Gear, KM171-5 (32 Teeth) 2 Groove (.874” Thick) | — |
| 714 | Part # 42714M | Idler Gear, F4A33 (38 Teeth) No Groove (4.080”OD) 1990-Up | — |
| 714 | Part # 42714MA | Idler Gear, F4A33/W4A32 (37 Teeth) 1 Groove (4.010”OD) 1990-Up | — |
| 714 | Part # 42714MB | Idler Gear, F4A33 (37 Teeth) 2 Groove 1990-Up | — |
| 714 | Part # 42714MC | Idler Gear, W4A33 (38 Teeth) No Groove (4.000”OD) 1990-Up | — |
| 714 | Part # 42714MD | Idler Gear, W4A33 (37 Teeth) No Groove (4.015”OD) 1990-Up | — |
| 714 | Part # 42714Y | Idler Gear, KM172-5 (32 Teeth) 1 Groove (.935” Thick) 3.630”OD 1989-Up | — |
| 715 not on diagram | Part # 42715B | Differential, KM171 (57 Teeth Ring Gear) 19 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715BA | Differential, KM171 (57 Teeth Ring Gear) 36 Teeth Speed-O Gear (.925” Thick Ring Gear) | — |
| 715 not on diagram | Part # 42715C | Differential, KM172/KM175 (51 Teeth Ring Gear) 19 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715CA | Differential, KM172/KM175 (51 Teeth Ring Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715CC | Differential, KM172/KM175 (52 Teeth Ring Gear) 1.125” Thick Gear (1 Groove) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715E | Differential, KM175-5 (57 Teeth) 1.355” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715EA | Differential, KM175-5 (57 Teeth) 1.355” Thick Gear (2 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715EB | Differential, KM175-5 (57 Teeth) 1.125” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715EC | Differential, KM175-5 (57 Teeth) 1.100” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715EG | Differential, KM175-5 (58 Teeth) 1.352” Thick Gear (2 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715G | Differential, KM177-8 (56 Teeth) 1.365” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715GA | Differential, KM177-8 (52 Teeth) 1.352” Thick Gear (2 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715GB | Differential, KM177-8 (58 Teeth) 1.486” Thick Gear (3 Groove Gear) 36 Teeth Speed-O Gear | — |
| 715 not on diagram | Part # 42715H | Differential, KM171-5/KM176-5 (64 Teeth) .925” Thick Gear (No Groove Gear) | — |
| 715 not on diagram | Part # 42715J | Differential, KM176-5 (66 Teeth) .925” Thick Gear (1 Groove Gear) | — |
| 715 not on diagram | Part # 42715JC | Differential, KM176-5 (65 Teeth) .925” Thick Gear (1 Groove Gear) | — |
| 715 not on diagram | Part # 42715L | Differential, A4AF3 (74 Teeth Ring Gear)(1.127” Thick)(No Groove)(36 Teeth Speed-O Gear) | — |
| 715 not on diagram | Part # 42715LA | Differential, A4AF1 (74 Teeth Ring Gear)(1.127” Thick)(2 Groove)(36 Teeth Speed-O Gear)… | — |
| 715 not on diagram | Part # 42715LAA | Differential, A4AF1 (74 Teeth Ring Gear)(1.127” Thick)(2 Groove)(36 Teeth Speed-O Gear)… | — |
| 715 not on diagram | Part # 42715LAB | Differential, A4AF1 (74 Teeth Ring Gear)(1.127” Thick)(1 Groove)(36 Teeth Speed-O Gear) | — |
| 715 not on diagram | Part # 42715LB | Differential, A4AF2 (67 Teeth Ring Gear)(1.205” Thick)(No Groove)(36 Teeth Speed-O Gear) | — |
| 715 not on diagram | Part # 42715LC | Differential, A4AF2 (67 Teeth Ring Gear)(1.205” Thick)(2 Groove)(36 Teeth Speed-O Gear) | — |
| 715 not on diagram | Part # 42715LD | Differential, A4BF1 (69 Teeth Ring Gear)(1.205” Thick)(1 Groove)(36 Teeth Speed-O Gear) | — |
| 715 not on diagram | Part # 42715M | Differential, F4A33 (58 Teeth) 3 Groove (1.110”ID Axle Housing) Cone Bearings | — |
| 715 not on diagram | Part # 42715MA | Differential, F4A33 (57 Teeth) No Groove | — |
| 715 not on diagram | Part # 42715MAA | Differential, F4A33 (57 Teeth) 2 Groove (1.110”ID Axle Housing) Cone Bearings | — |
| 715 not on diagram | Part # 42715MAB | Differential, F4A33 (58 Teeth) 3 Groove (1.041”ID Axle Housing) Cone Bearings | — |
| 715 not on diagram | Part # 42715MAC | Differential, F4A33 (58 Teeth) 2 Groove (1.041”ID Axle Housing) | — |
| 715 not on diagram | Part # 42715MB | Differential, W4A32/W4A33 (72 Teeth Ring Gear) 1 Groove | — |
| 715 not on diagram | Part # 42715MC | Differential, W4A32/W4A33 (72 Teeth) 2 Groove (1.040”ID Axle Housing) Ball Bearings | — |
| 715 not on diagram | Part # 42715Y | Differential, KM172-5 (56 Teeth) 1.125” Thick (No Groove Gear) 36 Teeth Speed-O Gear | — |
| 718 | Part # 42718M | Center Differential Assembly, W4A32/W4A33 (8 Bolt) 1990-Up | — |
| 730 | Part # 42730B | Pinion, KM171 (18 Teeth) Governor Type With Bearing On End Of Shaft 1983-88 | — |
| 730 | Part # 42730C | Pinion, KM175 (16 Teeth) With Bearing On End Of Shaft 1985-89 | — |
| 730 | Part # 42730D | Pinion, KM172 (16 Teeth) Governor Type With Bearing On End Of Shaft 1983-88 | — |
| 730 | Part # 42730E | Pinion, KM175-5 (16 Teeth) 1 Groove Next To Pilot (1.170” Thick Gear) Bearing On Middle Of Shaft 1988-Up | — |
| 730 | Part # 42730EA | Pinion, KM175-5 (16 Teeth) 1 Groove Next To Pilot (1.400” Thick Gear) Bearing On Middle Of Shaft 1988-Up | — |
| 730 | Part # 42730EB | Pinion, KM175-5 (16 Teeth) 1 Groove Next To Bearing (1.170” Thick Gear) Bearing On Middle Of Shaft 1988-Up | — |
| 730 | Part # 42730EC | Pinion, KM175-5 (15 Teeth) No Groove (1.500” Thick Gear) | — |
| 730 | Part # 42730ED | Pinion, KM175-5 (15 Teeth) No Groove (1.432” Thick Gear) 10 1/2” Long (3 Grooves On Shaft Next To Bearing) | — |
| 730 | Part # 42730EDA | Pinion, KM175-5 (15 Teeth) No Groove (1.432” Thick Gear) 10 1/2” Long (3 Grooves On Shaft, 2 Next To The Bearing | — |
| 730 | Part # 42730EE | Pinion, KM175-5 (16 Teeth) 1 Groove (1 3/8” Thick Gear) 10 1/2” Long (3 Grooves On Shaft) | — |
| 730 | Part # 42730EF | Pinion, KM175-5 (16 Teeth) 1 Groove (1 3/8” Thick Gear) 10 1/2” Long (2 Grooves On Shaft) | — |
| 730 | Part # 42730EG | Pinion, KM175-5 (15 Teeth) 1 Groove (10 1/2” Long) 3 Grooves On Shaft | — |
| 730 | Part # 42730EH | Pinion, KM175-5 (15 Teeth) No Grooves (1.580” Thick Gear) 10 1/2” Long (3 Grooves On Shaft) | — |
| 730 | Part # 42730G | Pinion, KM177-8 (17 Teeth) 2.370”OD Of Gear 1989-Up (Bearing On Middle Of Shaft) | — |
| 730 | Part # 42730H | Pinion, KM171-5 (20 Teeth) No Groove (Bearing On End Of Shaft) 1989-Up | — |
| 730 | Part # 42730HA | Pinion, KM171-5 (20 Teeth) 2 Grooves (Bearing On End Of Shaft) 1989-Up | — |
| 730 | Part # 42730J | Pinion, KM176-5 (18 Teeth) 1 Groove (2.180”OD Of Gear) 1989-Up (Bearing On Middle Of Shaft) | — |
| 730 | Part # 42730JA | Pinion, KM176-5 (17 Teeth) No Groove (2.075”OD Of Gear) 1989-Up (Bearing On Middle Of Shaft) | — |
| 730 | Part # 42730JB | Pinion, KM176-5 (17 Teeth) 1 Groove (2.075”OD Of Gear) 1989-Up (Bearing On Middle Of Shaft) | — |
| 730 | Part # 42730JC | Pinion, KM176-5 (16 Teeth) 1 Groove (2.235”OD Of Gear) 1989-Up (Bearing On Middle Of Shaft) | — |
| 730 | Part # 42730JD | Pinion, KM176-5 (18 Teeth) 2 Groove (2.180”OD Of Gear) 1989-Up (Bearing On Middle Of Shaft) | — |
| 730 | Part # 42730JE | Pinion, KM176-5 (18 Teeth) No Groove (2.250”OD Of Gear) 1989-Up | — |
| 730 | Part # 42730LA | Pinion, A4AF1 (21 Teeth Gear)(2.430”OD)(No Groove) Bearing On Middle Of Shaft (9 1/2” Long) | — |
| 730 | Part # 42730LB | Pinion, A4AF3 (19 Teeth Gear)(No Groove)(1 ID Groove On Shaft)(9 3/4” Long) | — |
| 730 | Part # 42730LC | Pinion, A4AF2 (19 Teeth Gear)(2.475”OD)(No Groove) Bearing On Middle Of Shaft (10 “ Long) | — |
| 730 | Part # 42730LD | Pinion, A4BF1 (18 Teeth)(No Groove)(1 ID Groove In Middle Of Shaft)(10” Long) | — |
| 730 | Part # 42730LE | Pinion, A4BF2 (16 Teeth)(No Groove)(10 1/4” Long) | — |
| 730 | Part # 42730M | Pinion, F4A33 (16 Teeth) With 43 Teeth Transfer Gear 1990-Up | — |
| 730 | Part # 42730MA | Pinion, F4A33 (18 Teeth) 3 Groove (With 43 Teeth Transfer Gear) 1990-Up | — |
| 730 | Part # 42730MAA | Pinion, F4A33 (18 Teeth) 2 Groove (With 43 Teeth Transfer Gear) 1990-Up | — |
| 730 | Part # 42730MB | Pinion, F4A33 (20 Teeth) With 43 Teeth Transfer Gear 1990-Up | — |
| 730 | Part # 42730MC | Pinion, W4A32/W4A33 (20 Teeth) 1 Groove On Edge (7 1/4” Long) 1990-Up | — |
| 730 | Part # 42730MD | Pinion, W4A33 (20 Teeth) 1 Groove In Center (7 1/4” Long) 1990-Up | — |
| 730 | Part # 42730Y | Pinion, KM172-5 (17 Teeth) Governor Type (With Bearing On End) 1989-Up | — |
| 750 not on diagram | Part # 42750B | Bell Housing, KM171 (14 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) 1983-88 | — |
| 750 not on diagram | Part # 42750BA | Bell Housing, KM171 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) 1983-88 | — |
| 750 not on diagram | Part # 42750C | Bell Housing, KM175/KM172-5/KM175-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # KM175-5 1985-Up… | 1 |
| 750 not on diagram | Part # 42750D | Bell Housing, KM172 (13 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) 1983-88 | — |
| 750 not on diagram | Part # 42750DA | Bell Housing, KM172 (14 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) 1983-88 | — |
| 750 not on diagram | Part # 42750DB | Bell Housing, KM172 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) 1983-88 | — |
| 750 not on diagram | Part # 42750E | Bell Housing, KM175-5 (14 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) Cast # F4A22 (Double Starter Location) 1989-Up | 1 |
| 750 not on diagram | Part # 42750EA | Bell Housing, KM175-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # F4A22 (Double Starter Location) 1989-Up | 1 |
| 750 not on diagram | Part # 42750G | Bell Housing, KM177-8 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # 177 (Uses An Aluminum Spacer Under… | 1 |
| 750 not on diagram | Part # 42750H | Bell Housing, KM171-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # KM170-1 1989-Up | 1 |
| 750 not on diagram | Part # 42750HA | Bell Housing, KM171-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast #F4A21 (Double Starter Location) 1989-Up | 1 |
| 750 not on diagram | Part # 42750J | Bell Housing, KM176-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # KM171 1989-Up | 1 |
| 757 | Part # 42757M | Idler Cover, F4A33/W4A33 (6 Bolt) Tin 1990-Up | — |
| 758 | Part # 42758L | Differential Cover, F4A33 (A4AF-1) 13 Bolt (Tin) 1991-Up | — |
| 758 | Part # 42758LB | Differential Cover, A4AF3/A4BF1/A4BF2 (13 Bolt)(Aluminum) | — |
| 758 | Part # 42758M | Differential Cover, F4A33/W4A33 (12 Bolt) Tin 1990-Up | — |
| 758 | Part # 42758MA | Differential Cover, F4A33 (12 Bolt) Aluminum 1990-Up | — |
| 760 | Part # 42760B | Case, KM171 (14 Bolt) 4 Dowels To Bell (Cast # 171) Non Vented (12 Pan Bolts, But Case Has 13 Holes) 1983-88 | 1 |
| 760 | Part # 42760BA | Case, KM171 (14 Bolt) 4 Dowels To Bell (Cast # 171) Vented Case (12 Pan Bolts, But The Case Has 13 Holes) 1983-88 | 1 |
| 760 | Part # 42760C | Case, KM175 (14 Bolts) 4 Dowels To Bell (Cast # 175) Non Vented Case (12 Pan Bolts, But The Case Has 13 Holes) 1985-89 | 1 |
| 760 | Part # 42760CA | Case, KM175 (14 Bolt) 4 Dowels To Bell (Cast # 175) Vented Case (12 Pan Bolts, But The Case Has 13 Holes) 1985-89 | 1 |
| 760 | Part # 42760D | Case, KM172 (13 Bolt) 4 Dowels To Bell (Cast # 175) Non Vented Case (12 Pan Bolts, But The Case Has 13 Holes) 1983-88 | 1 |
| 760 | Part # 42760DA | Case, KM172 (13 Bolt) 4 Dowels To Bell (Cast # 175) Vented Case (12 Pan Bolts, But The Case Has 13 Holes) 1983-88 | 1 |
| 760 | Part # 42760DB | Case, KM172 (14 Bolt) 4 Dowels To Bell (Cast # 175) Non Vented Case (12 Pan Bolts, But The Case Has 13 Holes) 1983-88 | 1 |
| 760 | Part # 42760DC | Case, KM172 (14 Bolt) 4 Dowels To Bell (Cast # 175) Vented Case (12 Pan Bolts, But The Case Has 13 Holes) 1983-88 | 1 |
| 760 | Part # 42760E | Case, KM175-5 (14 Bolt) 4 Dowels To Bell (Cast # S-KM175) 12 Pan Bolts, But The Case Has 13 Holes 1988-Up | 1 |
| 760 | Part # 42760EA | Case, KM175-5 (14 Bolt) 4 Dowels To Case (Cast # F4A22) 12 Pan Bolts, But The Case Has 13 Holes (Double Starter)… | 1 |
| 760 | Part # 42760G | Case, KM177-8 (14 Bolt) 4 Dowels To Bell (Cast # 177) 13 Pan Bolts 1989-Up | 1 |
| 760 | Part # 42760GA | Case, KM177-8 (14 Bolt) 4 Dowels To Bell (Cast # F4A23) 13 Pan Bolts 1989-Up | 1 |
| 760 | Part # 42760H | Case, KM171-5 (14 Bolt) 4 Dowels To Bell (Cast # S-KM171) 12 Pan Bolts, But The Case Has 13 Holes 1989-Up | 1 |
| 760 | Part # 42760HA | Case, KM171-5 (14 Bolt) 4 Dowels To Case (Cast # F3A21-S) 12 Pan Bolts, But The Case Has 13 Holes 1989-Up | 1 |
| 760 | Part # 42760J | Case, KM176-5 (14 Bolt) 4 Dowels To Bell (Cast # KM176) 12 Pan Bolts 1989-Up | 1 |
| 760 | Part # 42760L | Case, A4AF1 (4 3/8” Top Bolts) 2WD (Cast # A4AF1) 1991-Up | 1 |
| 760 | Part # 42760LA | Case, A4AF (5 1/8” Top Bolts) 2WD (Cast # A4AF2) 1991-Up | 1 |
| 760 | Part # 42760LB | Case, A4AF3 (5 1/8” Top Bolts) 2WD (Cast # A4AF3) 2000-Up (Uses A 6 Solenoid Valve Body) (13 3/4” Long Bell To Rear) | 1 |
| 760 | Part # 42760LC | Case, A4BF1 (5 1/8” Top Bolts) 2WD (Cast # A4BF) 1991-Up (Uses A 4 Solenoid Valve Body) (14 1/8” Long Bell To Rear) | 1 |
| 760 | Part # 42760LD | Case, A4BF2 (5 1/8” Top Bolts) 2WD (Cast # A4BF) 2000-Up (Uses A 6 Solenoid Valve Body) (14 1/8” Long Bell To Rear) | 1 |
| 760 | Part # 42760M | Case, F4A33 (4 3/8” Top Bolts) 2WD (Cast # F4A33EN) 1990-Up | 1 |
| 760 | Part # 42760MA | Case, F4A33 (3 9/16” Top Bolts) 2WD (Cast # F4A33EVS) 1990-Up (Detent For The Rooster Comb Bolts Into The Case) | 1 |
| 760 | Part # 42760MAA | Case, F4A33 (3 9/16” Top bolts) 2WD (Cast # F4A33EV) 1990-Up (Detent For The Rooster Comb Is Made In The Case) | 1 |
| 760 | Part # 42760MB | Case, W4A33 (4 3/8” Top Bolts) AWD (Cast # F4A33) 1990-Up (Detent For Rooster Comb Is Made In The Case) | 1 |
| 760 | Part # 42760MBA | Case, W4A33 (4 3/8” Top Bolts) 2WD (Cast # F4A33ENS) 1990-Up (Detent For The Rooster Comb Bolts Into The Case) | 1 |
| 760 | Part # 42760MC | Case, W4A33 (4 1/8” Top Bolts) AWD (Cast # W4A33) 1990-Up | 1 |
| 760 | Part # 42760N | Case, W4A32 (4 3/8” Top Bolts) AWD (Cast # W4A32) 1991-Up (Double Starter Location) | 1 |
| 760 | Part # 42760NA | Case, W4A32 (4 3/8” Top Bolts) AWD (Cast # W4A32) Single Starter Location | 1 |
| 760 | Part # 42760Y | Case, KM172-5 (14 Bolt) 4 Dowels To Bell (Cast # F3A22) 12 Pan Bolts 1989-Up | 1 |
| 762 | Part # 42762E | Housing, KM175-5 Overdrive (Cover) 4 Bolt (Cast # S-KM175) 1988-Up | 1 |
| 762 | Part # 42762EA | Housing, KM175-5 Overdrive (Cover) 4 Bolt (Cast # F4A22) 1989-Up (With Speed Sensor) | 1 |
| 762 | Part # 42762G | Housing, KM177-8 Overdrive (Cover) 4 Bolt (Cast # KM177) 1989-UP | 1 |
| 762 | Part # 42762GA | Housing, KM177 Overdrive (Cover) 4 Bolt (Cast # F4A23) With Speed Sensor Hole | 1 |
| 762 | Part # 42762L | Housing, A4AF1/A4AF2 Overdrive (Cover) 4 Bolt (Round)(With Speed Sensor Hole) 1991-99 | — |
| 762 | Part # 42762LC | Housing, A4AF3 Overdrive (Cover)(12 Bolt)(With Speed Sensor Hole) 2000-Up | — |
| 762 | Part # 42762M | Housing, F4A33/W4A32/W4A33 Overdrive (4 Bolt) Cast # W4A32 (Uses 1.220”OD Bearing #223) | 1 |
| 762 | Part # 42762MA | Housing, F4A33/W4A32/W4A33 Overdrive (4 Bolt) Cast # W4A32 (Uses 1.180”OD Bearing #223) | 1 |
| 771 not on diagram | Part # 42771LB | Spacer Plate, A4AF3 Case To Overdrive Cover (Aluminum)(12 Bolt)(1.030”Thick) | — |
| 774 | Part # 42774B | Driven Speed-O Gear, KM171 With Housing (17 Teeth) 1983-89 | — |
| 774 | Part # 42774C | Driven Speed-O Housing, KM175/KM171-5/KM172-5/KM175-5/KM176-5/KM177-8 With Housing (31 Teeth) 1985-UP | — |
| 774 | Part # 42774D | Driven Speed-O Gear, KM172 With Housing (16 Teeth) 1983-88 | — |
| 774 | Part # 42774L | Driven Speed-O Gear, A4AF1/A4AF3 With Housing (32 Teeth) 1991-Up | — |
| 774 | Part # 42774LA | Driven Speed-O Gear, A4BF1/A4BF2 With Housing (31 Teeth) | — |
| 774 | Part # 42774M | Driven Speed-O Gear, F4A33/W4A33 With Housing (29 Teeth) 1990-Up | — |
| 774 | Part # 42774N | Driven Speed-O Gear, W4A32 With Housing (28 Teeth) 1991-Up | — |
| 905 not on diagram | Part # 42905H | ServoAssembly, KM171-5 (1.955”OD & 3.056”OD) Aluminum Cover 1989-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 400 not on diagram | Part # 42400-1 | Those Darn KM’s (Book 1 Identification, Theory And Testing Manual)(ATRA) | — |
| 400 not on diagram | Part # 42400-2 | Those Darn KM’s (Book 2 Problems, Fixes & Tips Manual)(ATRA) | — |
| 400 not on diagram | Part # 42400B | Technical Manual, KM171/KM172 (3 Speed) | 1 |
| 400 not on diagram | Part # 42400C | Technical Manual, KM175 (4 Speed) | 1 |
| 400 not on diagram | Part # 42400M | Technical Manual, F4A33/W4A32/W4A33 (4 Speed) 1 Piece Case | — |
| 400 not on diagram | Part # 42400P | Technical Manual, KM177/KM177-8 (4 Speed) With V-6 | 1 |
| 484 not on diagram | Part # 42484A | Plug, KM Series Servo Air Exhaust Elbow | 1 |
| 494 | Part # 42494M | Filler Tube, F4A33/W4A33 (15” Long) | — |
| 494 | Part # 42494MA | Filler Tube, F4A33 (6” Long) | — |
| 687 not on diagram | Part # 42687B | Bracket, KM171/KM172/KM175 For Pinion Shaft Cover | — |
| 687 not on diagram | Part # 42687E | Bracket, Km171-5/KM172-5/KM175-5/KM176-5/KM177-8 For Pinion Shaft Cover | — |
| 692 | Part # 42692C | Plate, KM175 Overdrive Adapter (3 Bolt) 1985-89 | — |
| 692 | Part # 42692E | Plate, KM175-5/KM176-5/KM177-8 Overdrive Adapter (4 Bolt) 1988-Up | — |
| 692 | Part # 42692L | Plate, A4AF1/A4BF1/A4BF2 Overdrive Adapter (5 Bolt)(.225” Thick) 1991-Up | — |
| 692 | Part # 42692LB | Plate, A4AF3 Overdrive Adapter (4 Bolt)(4.109”OD)(Less Ball Bearings) | — |
| 692 | Part # 42692M | Plate, F4A33/W4A32/W4A33 Overdrive Adapter (5 Bolt)(.275” Thick) 1990-Up | — |
| 693 not on diagram | Part # 42693B | Bracket, KM171/KM171-5/KM175-5/KM176-5 Holds Idler Shaft | — |
| 693 not on diagram | Part # 42693C | Bracket, KM172/KM175 Holds Idler Shaft | — |
| 693 not on diagram | Part # 42693G | Bracket, KM177-8 Holds Idler Shaft | — |
| 693 not on diagram | Part # 42693Y | Bracket, KM172-8 Holds Idler Shaft | — |
| 719 | Part # 42719M | Viscous Coupling Unit, W4A32/W4A33 (4 1/4”OD) With 2 Splines | — |
| 725 | Part # 42725L | Retainer, A4AF1 Differential (5 Bolt) Aluminum (3.850”OD Where The O-Ring Sets) | — |
| 725 | Part # 42725LA | Retainer, A4AF3/A4BF1/A4BF2 Differential (5 Bolt) Aluminum (4.090”OD Where The O-Ring Sets) | — |
| 725 | Part # 42725M | Retainer, F4A33/W4A32/W4A33 Differential (4 Bolt) Cast Iron | — |
| 726 | Part # 42726LB | Retainer, A4AF3/A4BF1/A4BF2 Differential Cup (2 Bolt)(Aluminum) | — |
| 726 | Part # 42726M | Retainer, F4A33/W4A32/W4A33 Differential Cup (2 Bolt)(Aluminum) | — |
| 728 | Part # 42728M | Retainer, W4A32/W4A33 Center Differential (Aluminum) 1990-Up | — |
| 734 | Part # 42734M | Retainer, W4A32/W4A33 Pinion (Aluminum) 3 Bolt 1990-Up | — |
| 735 | Part # 42735M | Retainer, F4A33 Driven Transfer Gear (2.955”ID) 1990-Up (Without Oil Shield) | — |
| 735 | Part # 42735MA | Retainer, F4A33 Driven Transfer Gear (3.030”ID) 1990-Up (Without Tin Oil Shield) | — |
| 735 | Part # 42735MB | Retainer, W4A33 Driven Transfer Gear (2.955”ID) 1990-Up (With Tin Oil Shield) | — |
| 735 | Part # 42735MC | Retainer, W4A32/W4A33 Driven Transfer Gear (2.955”ID) 1990-Up (With Tin Oil Shield) Machined O-Ring Area Is 13/16” Wide | — |
| 775 not on diagram | Part # 42775A | Bolt, KM Series Converter (10mm X 1.5” Thread) | — |
| 775 not on diagram | Part # 42775E | Bolt, KM Series Converter (10mm X 1.25” Thread) | — |
| 795 not on diagram | Part # 42795LB | Nut, A4AF3 Holds Transfer Drive Gear To Annulus Hub # 604 (1.438”ID) | — |
| 796 not on diagram | Part # 42796L | Nut, A4AF1/A4AF3/A4BF1/A4BF2 Holds Transfer Driven Gear To The Pinion Shaft (.888”ID) | — |
| 857 | Part # 42857B | Wave Ring, KM171/KM172/KM175 Low/Reverse (5 3/16”OD) 1983-89 | 1 |
| 857 | Part # 42857G | Wave Ring, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/ W4A32 Low/Reverse (5 7/16”OD) 1988-Up | 1 |
| 857 | Part # 42857M | Wave Ring, F4A33/W4A33 Low/Reverse 1990-Up | — |
| 858 | Part # 42858MA | Wave Ring, W4A33 Forward Clutch (Bottom) No Tab | — |
| 861 | Part # 42861C | Snap Ring, KM Overdrive Pressure Plate (.040”) 1985-Up | 1 |
| 861 | Part # 42861CA | Snap Ring, KM Overdrive Pressure Plate (.050”) 1985-Up | 1 |
| 861 | Part # 42861CB | Snap Ring, KM Overdrive Pressure Plate (.060”) 1985-Up | 1 |
| 861 | Part # 42861CC | Snap Ring, KM Overdrive Pressure Plate (.070”) 1985-Up | 1 |
| 861 | Part # 42861CD | Snap Ring, KM Overdrive Pressure Plate (.080”) 1985-Up | 1 |
| 862 | Part # 42862C | Snap Ring, KM175/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32 Holds Retainer To Overdrive Drum 1985-Up | — |
| 862 | Part # 42862LB | Snap Ring, A4AF3 Holds Retainer To Overdrive Drum | — |
| 862 | Part # 42862M | Snap Ring, F4A33/W4A33 Holds Retainer To Overdrive Drum 1990-Up | — |
| 863 | Part # 42863C | Wire Ring, KM175/KM175-5/KM176-5/KM177-8/A4AF1/A4BF2/W4A32 Between Snap Ring & Overdrive Retainer 1985-Up | — |
| 863 | Part # 42863M | Wire Ring, F4A33/W4A33 Between Snap Ring & Overdrive Retainer 1990-Up | — |
| 869 not on diagram | Part # 42869B | Snap Ring, KM171/KM172/KM175/KM171-5/KM176-5 Servo Cover To Piston | — |
| 869 not on diagram | Part # 42869E | Snap Ring, KM175-5/KM177-8 Servo Cover To Piston | — |
| 869 not on diagram | Part # 42869M | Snap Ring, F4A33/W4A33 Servo Cover To Piston 1990-Up | — |
| 869 not on diagram | Part # 42869N | Snap Ring, W4A32 Servo Cover To Piston 1991-Up | — |
| 877 | Part # 42877B | Snap Ring, KM171/KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/ A4AF1/A4BF1/W4A32 Forward Drum Spring Retainer | — |
| 877 | Part # 42877L | Snap Ring, A4AF3 Forward Drum Spring Retainer (.060” Thick) | — |
| 877 | Part # 42877M | Snap Ring, F4A33/W4A33 Forward Drum Spring Retainer 1990-Up | — |
| 878 | Part # 42878B | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.063”) | 1 |
| 878 | Part # 42878BA | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.071”) | 1 |
| 878 | Part # 42878BB | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.079”) | 1 |
| 878 | Part # 42878BC | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.087”) | 1 |
| 878 | Part # 42878BD | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.094”) | 1 |
| 878 | Part # 42878BE | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.102”) | 1 |
| 878 | Part # 42878BG | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.110”) | 1 |
| 878 | Part # 42878BH | Snap Ring, All KM Except F4A33/W4A33 Forward & Direct Drum (.118”) | 1 |
| 879 | Part # 42879B | Snap Ring, KM171 Direct Drum Retainer | — |
| 879 | Part # 42879C | Snap Ring, KM172/KM175 Direct Drum Retainer | — |
| 879 | Part # 42879E | Snap Ring, KM175-5/KM177-8/A4BF1/A4BF2/W4A32 Direct Drum Retainer (.155”Thick, ID To OD) | — |
| 879 | Part # 42879H | Snap Ring, KM171-5/KM176-5/A4AF1 Direct Drum Retainer | — |
| 879 | Part # 42879L | Snap Ring, A4AF3 Direct Drum Retainer (.120” Thick, ID To OD) | — |
| 879 | Part # 42879M | Snap Ring, F4A33/W4A33 Direct Drum Retainer | — |
| 881 | Part # 42881B | Snap Ring, KM171 Holds Race To Input Shaft (7/16”ID) 1983-88 | — |
| 881 | Part # 42881C | Snap Ring, KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/ A4BF1/A4BF2/F4A33/W4A32/W4A33 Holds Race To… | — |
| 885 | Part # 42885B | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.071”) 1983-89 | 1 |
| 885 | Part # 42885BA | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.079”) 1983-89 | 1 |
| 885 | Part # 42885BB | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.087”) 1983-89 | 1 |
| 885 | Part # 42885BC | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.094”) 1983-89 | 1 |
| 885 | Part # 42885BD | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.102”) 1983-89 | 1 |
| 885 | Part # 42885BE | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.110”) 1983-89 | 1 |
| 885 | Part # 42885BG | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.118”) 1983-89 | 1 |
| 885 | Part # 42885BH | Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.126”) 1983-89 | 1 |
| 885 | Part # 42885E | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.071”) 1988-Up | — |
| 885 | Part # 42885EA | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.079”) 1988-Up | — |
| 885 | Part # 42885EB | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.087”) 1988-Up | — |
| 885 | Part # 42885EC | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.094”) 1988-Up | — |
| 885 | Part # 42885ED | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.102”) 1988-Up | — |
| 885 | Part # 42885EE | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.110”) 1988-Up | — |
| 885 | Part # 42885EG | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.118”) 1988-Up | — |
| 885 | Part # 42885EH | Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.126”) 1988-Up | — |
| 885 | Part # 42885M | Snap Ring, F4A33/W4A33 Holds Low/Reverse Top Pressure Plate In (.115”) 1990-Up | — |
| 889 | Part # 42889B | Snap Ring, All KM With Ring Gear To Hub (.037”) 1983-Up | — |
| 889 | Part # 42889M | Snap Ring, F4A33/W4A33 Holds Ring Gear To Hub (.060”) 1990-Up | — |
| 893 | Part # 42893B | Snap Ring, KM171/KM172/KM175 Holds Return Spring To Center Support | — |
| 893 | Part # 42893E | Snap Ring, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8 Holds Return Spring In Center Support | — |
| 894 | Part # 42894B | Snap Ring, KM171/KM171-5 Bearing To Case (2.710”ID) .060” | — |
| 894 | Part # 42894C | Snap Ring, KM171/KM171-5 Bearing To Case (2.710”ID) .035” | — |
| 894 | Part # 42894E | Snap Ring, KM172-5/KM175-5/KM176-5/KM177-8 Bearing To Case (3” ID) | — |
| 894 | Part # 42894LC | Snap Ring, A4AF1/A4AF2 Bearing To Case (.040” Thick)(3.884”OD) | — |
| 894 | Part # 42894M | Snap Ring, F4A33/W4A32/W4A33 Bearing To Case (3.650”ID) 1990-Up | — |
| 895 | Part # 42895B | Snap Ring, KM171/KM171-5 Bearing To Shaft (1.090”ID) | — |
| 895 | Part # 42895C | Snap Ring, KM172/KM175 Bearing To Shaft (1.300”ID) | — |
| 895 | Part # 42895E | Snap Ring, KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32/W4A33 Bearing To Shaft (1.500”ID) 1990-Up | — |
| 896 | Part # 42896B | Snap Ring, KM171/KM172/KM175/KM172-5/KM176-5 Servo Cover (Top) | — |
| 896 | Part # 42896E | Snap Ring, KM175-5/KM177-8 Servo Cover (Top) | — |
| 896 | Part # 42896M | Snap Ring, F4A33/W4A33 Servo Cover (Top) | — |
| 896 | Part # 42896N | Snap Ring, W4A32 Servo Cover (Top) Use 42869N | — |
| 897 not on diagram | Part # 42897B | Snap Ring, KM171/KM172/KM171-5/KM172-5 Holds Governor To Transfer Shaft | — |
| 898 not on diagram | Part # 42898L | Snap Ring, A4AF3/A4BF1/A4BF2 Pinion Bearing To Case (.099”Thick)(2 Eyelets) | — |
| 899 not on diagram | Part # 42899B | Snap Ring, KM171/KM172/KM175/KM171-5/KM172-5 Holds Gear To Shaft | — |
| 991 not on diagram | Part # 42991E | Linkage Assembly, KM175-5/KM176-5 Internal (.130” Thick Rooster Comb) | — |
| 991 not on diagram | Part # 42991EA | Linkage Assembly, KM175-5/KM176-5 Internal (.175” Thick Rooster Comb) | — |
| 991 not on diagram | Part # 42991G | Linkage Assembly, KM177-8 Internal 1989-Up | — |
| 991 not on diagram | Part # 42991L | Linkage Assembly, A4AF1/A4AF3/A4BF1/A4BF2 Internal | — |
| 994 | Part # 42994B | Park Actuator Rod, KM170/KM171/KM172/KM175/KM177/KM171-5/KM172-5/KM175-5/KM176-5 /KM177-8 (5 7/8” Long) | — |
| 994 | Part # 42994L | Park Actuator Rod, A4AF1/A4AF3/A4BF1/A4BF2 (6 1/4” Long) | — |
| 994 | Part # 42994M | Park Actuator Rod, F4A33/W4A32/W4A33 (With 2 Rollers) 1990-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.