AT 540 / AT 545 parts diagram
Same diagram:
AT 545
Positions:
142 total, 118 on the diagram
Parts:
190 total, 88 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 111000 | Paper & Rubber Kit, AT540/AT545 | — |
| 002 not on diagram | Part # 111002 | Overhaul Kit, AT540/AT545 | — |
| 004 not on diagram | Part # 111004 | Master L/Steels Kit, AT540/AT545 | — |
| 006 not on diagram | Part # 111006 | Master W/Steels Kit, AT540/AT545 | — |
| 011 not on diagram | Part # 111011 | Filter Kit, AT540 (Flat, Brass Screen)(400 Type Filter) | — |
| 011 not on diagram | Part # 111011A | Filter Kit, AT545 | — |
| 030 not on diagram | Part # 111030 | Bushing Kit, AT540/Early AT545 1970-Up (Up To Serial # 3210775437) | — |
| 175 not on diagram | Part # 111175 | Ring Kit, AT540/AT545 | — |
| 200 not on diagram | Part # 111200 | Washer Kit, AT540/AT545 (5 Pieces) 1988-Up | — |
| 200 not on diagram | Part # 111200A | Washer Kit, AT540/AT545 (13 Pieces) 1988-Up | — |
| 231 | Part # 111231K | Bearing Set, AT540/AT545 Forward Drum To Forward Clutch Hub (Bearing & 2 Races) | 1 |
| 560 not on diagram | Part # 111560 | Piston Kit, AT540 4th Range Drum (Use 111564) | — |
| 560 not on diagram | Part # 111560C | Piston Kit, AT545 4th Range Drum (Use 111564C) | — |
| 562 not on diagram | Part # 111562 | Piston Kit, AT540/AT545 2nd Range Clutch (Use 111565) | — |
| 564 not on diagram | Part # 111564 | Piston Kit, AT540 Forward Drum (.680” thick) (Also Fits AT540 4th Range Drum) | — |
| 564 not on diagram | Part # 111564C | Piston Kit, AT545 Forward Drum (.730” thick) (Also Fits AT545 4th Range Drum) | — |
| 565 not on diagram | Part # 111565 | Piston Kit, AT540/AT545 3rd Range Clutch (Also Fits 2nd Range Clutch) | — |
| 567 not on diagram | Part # 111567 | Piston Kit, AT540/AT545 1st Range Clutch | — |
| 777 | Part # 111777AK | Bolt Set, AT540/AT545 Stator To Case (9 Pieces) | — |
| 777 | Part # 111777K | Bolt Set, AT540 Pump Body To Stator (Front) 6 Pieces | — |
| 778 | Part # 111778K | Bolt Set, AT540 Stator To Pump Body (Rear) (5 Pieces) | — |
| 779 | Part # 111779K | Bolt Set, AT540/AT545 Bottom Pan To Case (21 Per Set) | — |
| 782 not on diagram | Part # 111782AK | Bolt Set, AT540 Valve Body To Case (19 Pieces) | — |
| 782 not on diagram | Part # 111782CK | Bolt Set, AT545 Valve Body To Case (19 Pieces) | — |
| 999 not on diagram | Part # 111999A | Tube Set, AT540 | — |
| 999 not on diagram | Part # 111999C | Tube Set, AT545 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 160 not on diagram | Part # 111160 | Modulator, AT540/AT545 (Allison) White (Adjustable) | 1 |
| 680 | Part # 111680 | Governor Assembly, AT540/AT545 (ID # 460) | 2 |
| 680 | Part # 111680A | Governor Assembly, AT540/AT545 (ID # 461) | 2 |
| 680 | Part # 111680B | Governor Assembly, AT540/AT545 (ID # 462) | 2 |
| 740 | Part # 111740A | Valve Body, AT540/AT545 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 111410A | Switch, AT540/AT545 Neutral Safety | — |
| 412 not on diagram | Part # 111412A | Switch, AT540/AT545 Pressure (On Passenger Side Of Case) | — |
| 847 | Part # 111847C | Reluctor, AT545 Drive Speed-O (16 Teeth) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 34010B | Filter, 400 Flat (Brass) L1967-Up | — |
| 010 | Part # 101010 | Filter, AT545 | 1 |
| 765 | Part # 111765A | Pan, AT540 Bottom (W/1 Screw In Dipstick Hole) | — |
| 765 | Part # 111765C | Pan, AT545 Bottom (W/2 Screw In Dipstick Holes) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 44070 | Seal, 180/180C Front (Converter Housing) 1969-Up | 3 |
| 072 | Part # 44072 | Seal, 1000/2000 Allison Manual Lever 2000-Up | 2 |
| 074 | Part # 111074 | Seal, AT540/AT545 Rear Case (Extension Housing) (3.630”OD, 2.500”ID) | 1 |
| 178 | Part # 111178 | Ring, AT540/AT545 Turbine Shaft | 1 |
| 179 | Part # 111179 | Ring, AT540/AT545 Stator To Forward Drum & Center Support 1970-Up | 1 |
| 300 | Part # 111300 | Gasket, AT540/AT545 Bottom Pan (Also Fits MT600 Series) | 1 |
| 300 | Part # 111300A | Gasket, AT540/AT545 Bottom Pan (Also Fits MT600 Series) (Armstrong) | — |
| 300 | Part # 111300F | Gasket, AT540/AT545 Bottom Pan (Also Fits MT600 Series) (Farpak) | — |
| 305 not on diagram | Part # 34305 | Gasket, 400 Extension Housing 1964-Up | 1 |
| 306 | Part # 34306 | Gasket, 400 Governor Cover 1964-Up | 1 |
| 309 | Part # 44309 | Gasket, 180/180C Pump Bolt Washer 1969-Up | 2 |
| 310 | Part # 111310 | Gasket, AT540/AT545 Pump To Case | 1 |
| 311 | Part # 44311 | O-Ring, 250/250C/350/350C Pump 1969-86 | 2 |
| 319 | Part # 111319 | Gasket, AT540/AT545 PTO Cover | 1 |
| 334 | Part # 34334C | Lip Seal, 400/4L80E Forward & Direct Clutch (Center) 1964-Up | 1 |
| 335 | Part # 34335 | Lip Seal, 250/250C/350/350C Forward Clutch (Outer) 1969-86 | 1 |
| 336 | Part # 34336 | Lip Seal, 400/4L80E Forward & Direct Clutch (Inner) 1964-Up | 1 |
| 346 not on diagram | Part # 111346 | O-Ring, AT540/AT545 Modulator (Use 103368) | 1 |
| 379 | Part # 111379 | O-Ring, AT540/AT545 Filler Tube (Use 12368A) | 1 |
| 381 | Part # 111381 | O-Ring, AT540/AT545 Pump Stator (Lathe Cut) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 111034B | Bushing, AT540/AT545 Front Pump Body | 1 |
| 036 | Part # 111036 | Bushing, AT540/AT545 Stator (Front) (Use 34037) | — |
| 037 | Part # 34037 | Bushing, 400 Stator Support (Front & Rear), 400/4L80E Sun Gear Shaft, 4L80E Overrun Drum (Rear, Small) 1964-Up | 1 |
| 037 | Part # 111037B | Caged Needle Bearing, AT540/AT545 Stator (Rear) (Use 111209B) | — |
| 044 | Part # 111044 | Bushing, AT540/AT545 Center Support (1.475”ID)(1.600”OD) | — |
| 053 | Part # 111053 | Bushing, AT540/AT545 Front Planet | — |
| 054 | Part # 111054 | Bushing, AT540/AT545 Sun Gear (Front & Rear) (Use 34037 or 12052) | — |
| 062 | Part # 111062 | Bushing, AT540/AT545 Output Shaft Pilot | — |
| 209 not on diagram | Part # 111209B | Caged Needle Bearing, AT540 Stator (Rear) | 1 |
| 211 | Part # 111211A | Washer, AT540/AT545 Stator To Forward Drum (# 0) (.056”-.060”) | 1 |
| 211 | Part # 111211AA | Washer, AT540/AT545 Stator To Forward Drum (# 1) (.072”-.076”) | 1 |
| 211 | Part # 111211AB | Washer, AT540/AT545 Stator To Forward Drum (# 2) (.089”-.093”) | 1 |
| 211 | Part # 111211AC | Washer, AT540/AT545 Stator To Forward Drum (# 3) (.105”-.109”) | 1 |
| 211 | Part # 111211AD | Washer, AT540/AT545 Stator To Forward Drum (# 4) (.121”-.125”) | 1 |
| 211 | Part # 111211AE | Washer, AT540/AT545 Stator To Forward Drum (# 5) (.138”-.142”) | 1 |
| 235 | Part # 34235 | Washer, 400/4L80E Forward Hub to Direct Drum (Metal) 1964-Up | 1 |
| 238 | Part # 111238 | Washer, AT540/AT545 Front Planet To Center Planet (Fiber) (3.085”OD) | 1 |
| 239 | Part # 111239 | Washer, AT540/AT545 Front Sun Gear To Center Support (Fiber) (2.135”OD) | 1 |
| 241 | Part # 111241 | Washer, AT540/AT545 Front Sun Gear To Front Planet (Brass) | 1 |
| 244 | Part # 111244 | Washer, AT540/AT545 Center Planet To Center Ring Gear (.062”) | 1 |
| 247 | Part # 111247 | Bearing, AT540/AT545 Rear Sun Gear To Rear Planet (1.766”OD) | — |
| 248 | Part # 111248 | Race, AT540/AT545 Rear Sun Gear To Rear Planet (1.809”OD) | — |
| 268 | Part # 111268 | Ball Bearing, AT540/AT545 Output Shaft To Case (Front) (2.953”OD) (3L09) | — |
| 269 | Part # 111269 | Spacer, AT540/AT545 Output Shaft Bearing (Front) To Governor Drive Gear (1.924” Thick) | — |
| 271 | Part # 111271 | Ball Bearing, AT540/AT545 Output Shaft To Case (Rear) (3.350”OD) (NDH 3209) | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 510 not on diagram | Part # 34510 | Pump Body, 400 (6 Bolt)(Cast # 895) 1971-Up | 2 |
| 510 not on diagram | Part # 34510A | Pump Body, 400 (8 Bolt)(Cast # 895) 1964-Up | 1 |
| 510 not on diagram | Part # 34510B | Pump Body, 400 (8 Bolt)(Cast # 121) 1964-Up | 1 |
| 510 not on diagram | Part # 111510B | Pump Body, AT545 (Cast # 919) (6 Bolts From Front Of Body To Stator) | 2 |
| 510 not on diagram | Part # 111510CA | Pump Body, AT545 (Cast # 336) (7 Bolts From Front Of Body To Stator) | 1 |
| 520 | Part # 111520A | Stator, AT540 (Uses Pump Body Cast # 895) | 2 |
| 520 | Part # 111520B | Stator, AT545 (uses A Body W/Cast # 919)(With 6 Bolts From Front Of Body To Stator)… | 1 |
| 520 | Part # 111520BA | Stator, AT545 (Uses A Body With Cast #919)(With 6 Bolts From Front Of Body To Stator)… | 1 |
| 520 | Part # 111520BB | Stator, AT545 (Uses A Body With Cast #919)(With 6 Bolts From Front Of Body To Stator)… | 1 |
| 520 | Part # 111520CA | Stator, AT545 (Uses Pump Body Cast # 919) (With 7 Bolts From Front Of Body To Stator) | 1 |
| 530 | Part # 44530AC | Pump Gear Set, 250/350 (.727” Thick) 1969-79 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 104 | Part # 111104 | Friction, AT540/AT545 4th, Forward & Reverse Clutch (.080”) 42 Teeth (5.89”OD) | 1 |
| 106 | Part # 111106 | Friction, AT540/AT545 2nd & 3rd Clutch (.100”) 80 Teeth (9.10”OD) | 1 |
| 108 | Part # 111108 | Friction, AT540/AT545 1st Range Clutch (.097”) 60 Teeth (8.15”OD) | 1 |
| 124 | Part # 111124 | Steel, AT540/AT545 4th & Forward Clutch (Use 34126A) | 1 |
| 126 | Part # 34126A | Steel, 400/425/4L80E Direct Clutch (.090”) 1964-Up | 1 |
| 126 | Part # 111126 | Steel, AT540/AT545 2nd & 3rd Clutch .098” (9 Teeth) (7.25”ID) | 1 |
| 128 | Part # 111128 | Steel, AT540/AT545 1st Range Clutch .098” (30 Teeth) (6.50”ID) | 1 |
| 144 | Part # 111144 | Pressure Plate, AT540/AT545 4th Range Clutch (Use 34146) | — |
| 146 | Part # 34146 | Pressure Plate, 400/4L80E Direct Clutch 1964-Up | 1 |
| 146 | Part # 111146AA | Pressure Plate, AT540/AT545 2nd & 3rd Range Clutch (Selective) | — |
| 148 | Part # 111148AA | Pressure Plate, AT540/AT545 1st Range Clutch (Selective) | — |
| 960 | Part # 111960 | Piston, AT540 4th Range Drum (.680” Thick) (Use 111964) | — |
| 960 | Part # 111960C | Piston, AT545 4th Range Drum (.730” Thick) (Use 111964C) | — |
| 962 | Part # 111962 | Piston, AT540/AT545 2nd Range Clutch (Use 111965) | — |
| 964 | Part # 111964 | Piston, AT540 Forward Clutch (4 Ears)(Cast # 68316321) (Also Fits AT540 4th Range Clutch) | 1 |
| 964 | Part # 111964B | Piston, AT545 Forward Clutch (No Ears) (Cast # 29505882) (Also Fits AT545 4th Range Clutch) | 1 |
| 964 | Part # 111964C | Piston, AT545 Forward Clutch (No Ears)(Cast # 6884280) (Also Fits AT545 4th Range Clutch) | 1 |
| 965 | Part # 111965 | Piston, AT540/AT545 3rd Range Clutch (Aluminum) Cast # 6834817(Also Fits AT540/AT545 2nd Range Clutch) | 2 |
| 967 | Part # 111967 | Piston, AT540/AT545 1st Range Clutch (Cast # 6834816) | 1 |
| 970 | Part # 111970 | Springs, AT540/AT545 4th Range Clutch Return (Use 34974) | — |
| 972 | Part # 111972 | Springs, AT540/AT545 2nd Range Clutch Return (Use 111975) | — |
| 974 | Part # 34974 | Spring, 400 Forward & Direct Clutch Return 1964-Up | 1 |
| 975 | Part # 111975K | Spring Set, AT540/AT545 3rd Range Clutch Return (12 Pieces) (Also Fits AT540/AT545 2nd Range Clutch Return) | — |
| 977 | Part # 111977K | Spring Set, AT540/AT545 1st Range Clutch Return (22 Pieces) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 550 | Part # 111550A | Drum, AT540/AT545 4th Range Clutch (5 Clutch) (No Snap Ring Groove On The OD)… | 1 |
| 550 | Part # 111550AA | Drum, AT540/AT545 4th Range Clutch (5 Clutch)(No Snap Ring Groove On OD)(1.398”OD Front Splines On # 674, Must Measure)… | — |
| 554 | Part # 111554 | Drum, AT540/AT545 Forward Drum (No Snap Ring Groove On The OD) (Use 111550) | — |
| 554 | Part # 111554A | Drum, AT540/AT545 Forward Clutch (5 Clutch) (With Snap Ring Groove On The OD For The PTO Gear) | 1 |
| 570 | Part # 111570 | Hub, AT540/AT545 4th Range Clutch (Use 34575) | — |
| 574 | Part # 34574E | Clutch Hub, 400/4L80E Forward Clutch 1966-Up | 1 |
| 574 | Part # 111574 | Hub, AT540/AT545 Forward Clutch (Use 34574E) | — |
| 574 | Part # 111574A | Clutch Hub, AT545 Forward Clutch (2.113” Overall Height)(1.150”ID Of Hub) | — |
| 575 not on diagram | Part # 34575 | Clutch Hub, 400/4L80E Direct Clutch (1.230” Thick Splines) | — |
| 580 | Part # 111580 | Planet, AT540/AT545 Center Planet (4 Gear) (Straight Teeth) | 1 |
| 582 | Part # 111582 | Planet, AT540/AT545 Front Planet (4 Gear) (Straight Teeth) | 1 |
| 584 | Part # 111584 | Planet, AT540 Rear (4 Gear, No Groove) Can Use 111584C | 1 |
| 584 | Part # 111584C | Planet, AT545 Rear (4 Gear, 1 Groove) Can Use 111584 | — |
| 590 | Part # 111590 | Ring Gear, AT540/AT545 Center Planet (54 Teeth) | — |
| 592 | Part # 111592 | Ring Gear, AT540/AT545 Front Planet (54 Teeth) | — |
| 594 | Part # 111594 | Ring Gear, AT540/AT545 Rear Planet (Straight Teeth) | — |
| 610 | Part # 111610 | Sun Gear, AT540/AT545 Center (22 Teeth) (1.963” Long) | 1 |
| 612 | Part # 111612 | Sun Gear, AT540 Front Planet (26 Teeth, No Groove) Can Use 111612C | 1 |
| 612 | Part # 111612C | Sun Gear, AT545 Front Planet (26 Teeth, 1 Groove) Can Use 111612 | 1 |
| 614 | Part # 111614 | Sun Gear, AT540/AT545 Rear (22 Teeth) 2.142” Long (Straight Teeth) | 1 |
| 626 | Part # 111626 | Connecting Drum,AT540/AT545 Center Planet To Rear Planet | — |
| 630 | Part # 111630 | Center Support, AT540/AT545 (Aluminum) (1.404”ID Of Bushing) | — |
| 630 | Part # 111630A | Center Support, AT540/AT545 (Aluminum) (1.378”ID Of Bushing) | — |
| 630 | Part # 111630B | Center Support, AT540/AT545 (Aluminum) (1.460”ID Of Bushing) | 1 |
| 670 | Part # 111670 | Shaft, AT540/AT545 Input (9 1/4” Long, 1 Ring) | 1 |
| 672 | Part # 111672 | Shaft, AT540/AT545 Main (10 5/8” Long) | 1 |
| 674 | Part # 111674 | Shaft, AT540/AT545 Sun Gear (5.475” Long)(1.402”OD Bushing Land)(1.350”OD Front Splines) | 1 |
| 674 | Part # 111674AA | Shaft, AT540/AT545 Sun Gear (5.475”Long)(1.402”OD Bushing Land)(1.398”OD Front Splines) | — |
| 678 | Part # 111678A | Shaft, AT540/AT545 Output Shaft (9 1/2” Long) (Bolt-On Yoke Type) | — |
| 683 | Part # 111683 | Gear, AT540/AT545 Governor (Drive) (12 Teeth) (1 Notch) (Steel) | 1 |
| 684 | Part # 34684B | Gear, 425 Governor Driven (Left Angle) (With 1 Pin & 2 Nails) 1966-78 | — |
| 686 | Part # 111686 | Cover, AT540/AT545 Governor | — |
| 704 | Part # 111704 | Gear, AT540/AT545 PTO Ring | — |
| 757 | Part # 111757 | Cover, AT540/AT545 PTO (6 Bolt) | — |
| 760 | Part # 111760A | Case, AT540 (W/PTO Cover) (Cast # 6839580) Can Use 111760C | 1 |
| 760 | Part # 111760C | Case, AT545 (W/PTO Cover) (Cast # 1950074) Can Use 111760A | 1 |
| 774 | Part # 111774A | Speed-O Housing, AT540 (W/20 Teeth Gear) 3 1/4” Long (Screw-In) | — |
| 847 | Part # 111847A | Gear, AT540 Speed-O Drive (5 Teeth) (Steel) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 495 | Part # 111495A | Filter Tube, AT540 (6 1/2” Long) (3/4”OD At Each End) | — |
| 495 | Part # 111495C | Filter Tube, AT545 (7 15/16” Long) (1 3/16”OD At 1 End) | — |
| 681 not on diagram | Part # 111681-5 | Roll Pin, AT540/AT545 Holds Governor Drive Gear To Output Shaft | — |
| 783 | Part # 111783 | Bolt, AT540/AT545 Center Support | — |
| 798 | Part # 111798 | Bolt, AT540/AT545 Output Flange (3/4” Head) 1/2” x 20 Fine Thread | — |
| 841 not on diagram | Part # 111841 | Yoke AT540/AT545 Output Shaft (4 Bolt, 6” Long) | — |
| 843 | Part # 44843A | Bracket, 250/250C/350/350C Holds Modulator in 1969-86 | 2 |
| 846 | Part # 111846C | Bracket, AT545 Filter To Valve Body | — |
| 862 | Part # 111862 | Snap Ring, AT540 4th Range Piston Retainer (Use 34877) | — |
| 862 | Part # 111862C | Snap Ring, AT545 4th Range Piston Retainer (Use 111877C) | — |
| 874 | Part # 111874 | Snap Ring, AT540/AT545 Holds 2nd Range Retainer In Case (Use 111878) | — |
| 876 | Part # 111876 | Snap Ring, AT540/AT545 Forward & 4th Range Clutch (Use 34878) | — |
| 877 | Part # 34877 | Snap Ring, 400/4L80E Holds Retainer to Forward Drum 1964-Up | 1 |
| 877 | Part # 111877C | Snap Ring, AT545 Forward Piston Retainer (Also Fits AT545 4th Range Piston Retainer) | 1 |
| 878 | Part # 34878 | Snap Ring, 400/4L80E Holds Forward & Direct Clutch Pressure Plate in 1964-Up | 1 |
| 878 | Part # 111878 | Snap Ring, AT540/AT545 Holds 3rd Range Clutch Pressure Plate In (Also Fits AT540/AT545 Center Support (Both Sides) | — |
| 879 | Part # 111879 | Snap Ring, AT540/AT545 Holds 3rd Range Retainer In Case (Use 111878) | — |
| 882 | Part # 111882 | Snap Ring, AT540/AT545 Holds Front Ring Gear To Center Planet & Holds Rear Planet To Connecting Drum) | — |
| 888 | Part # 111888 | Snap Ring, AT540/AT545 Holds Rear Sun Gear To Center Ring Gear | — |
| 889 | Part # 111889 | Snap Ring, AT540/AT545 Holds Rear Sun Gear To Main Shaft (Spiral) | — |
| 892 | Part # 111892 | Snap Ring, AT540/AT545 Holds 1st Range Clutch Pressure Plate In Case | — |
| 893 | Part # 111893 | Snap Ring, AT540/AT545 Holds 1st Range Piston Retainer In Case | — |
| 894 | Part # 111894 | Snap Ring, AT540/AT545 Holds Rear Planet To Output Shaft | — |
| 896 | Part # 111896 | Snap Ring, AT540/AT545 Stop For Rear Case Bearing (Stays In Case) | 1 |
| 897 | Part # 111897 | Snap Ring, AT540/AT545 Holds Rear Output Bearing In Case | 1 |
| 898 | Part # 111898 | Snap Ring, AT540/AT545 Holds PTO Gear To Forward Drum | 1 |
| 980 | Part # 111980 | Retainer, AT540/AT545 4th Range Clutch Spring (Use 34984) | — |
| 982 | Part # 111982 | Retainer, AT540/AT5452nd Range Clutch Spring (Use 111985) | — |
| 984 | Part # 34984 | Retainer, 400/4L80E Forward Return Spring 1964-Up | 1 |
| 985 | Part # 111985 | Retainer, AT540/AT545 3rd Range Clutch Spring (Also Fits AT540/AT545 2nd Range Clutch Spring Retainer) | — |
| 985 | Part # 111985-5K | Lock Ring Set, AT540/AT545 3rd Range Spring Retainer (4 Pieces) (Also Fits AT540/AT545 2nd Range Spring Retainer) | — |
| 987 | Part # 111987 | Retainer, AT540/AT545 1st Clutch Spring | — |
| 991 | Part # 111991 | Linkage Assembly, AT540/AT545 Internal | — |
| 996 | Part # 111996 | Cooler Fitting, AT540/AT545 (Elbow, Screw-In) | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.