9HP48 / 948TE parts diagram
Same diagram:
948TE
Transmission page:
Positions:
160 total, 142 on the diagram
Parts:
177 total, 19 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 339002B | Overhaul Kit, ZF9HP48 2013-Up | — |
| 004 not on diagram | Part # 339004B | Master L/Steels Kit, ZF9HP48 2013-Up | — |
| 006 not on diagram | Part # 339006B | Master W/Steels Kit, ZF9HP48 2013-Up | — |
| 030 not on diagram | Part # 339030A | Bushing Kit, ZF9HP48 (948TE) 2013-Up (Contains 4 Bushings) | — |
| 560 not on diagram | Part # 339560B | Piston Kit, ZF9HP48 E Clutch (Bonded Piston) 2013-Up | — |
| 564 not on diagram | Part # 339564B | Piston Kit, ZF9HP48 C Clutch (Aluminum Piston) 2013-Up | — |
| 565 not on diagram | Part # 339565B | Piston Kit, ZF9HP48 B Clutch (Aluminum Pistons) 2013-Up | — |
| 566 not on diagram | Part # 339566B | Piston Kit, ZF9HP48 D Clutch (Aluminum Pistons) 2013-Up | — |
| 776 not on diagram | Part # 339776BK | Bolt Set, ZF9HP48 Bell Housing To Case (25 Pieces) 2013-Up | — |
| 777 | Part # 339777BK | Bolt Set, ZF9HP48 Bell Housing To Pump Housing (9 Pieces) 2013-Up | — |
| 778 | Part # 339778-1BK | Bolt Set, ZF9HP48 Pump Housing To Bell Housing (6 Pieces) 2013-Up | — |
| 778 | Part # 339778BK | Bolt Set, ZF9HP48 Stator To Pump Housing (7 Pieces) 2013-Up | — |
| 780 not on diagram | Part # 339780BK | Bolt Set, ZF9HP48 Rear Cover To Case (4 Pieces) 2013-Up | — |
| 782 | Part # 339782BK | Bolt Set, ZF9HP48 Valve Body To Case (10 Pieces) 2013-Up | — |
| 785 not on diagram | Part # 339785BK | Bolt Set, ZF9HP48 Hydraulic Cover Plate To Case (11 Pieces) 2013-Up | — |
| 786 | Part # 339786BK | Bolt Set, ZF9HP48 Differential Ring Gear To Differential Housing (12 Pieces) 2013-Up | — |
| 787 | Part # 339787BK | Bolt Set, ZF9HP48 Transfer Shaft Plate To Bell Housing (7 Pieces) 2013-Up | — |
| 791 not on diagram | Part # 339791BK | Bolt Set, ZF9HP48 Cooler & Lines To Bell Housing (9 Pieces) 2013-Up | — |
| 793 not on diagram | Part # 339793BK | Bolt Set, ZF9HP48 Filter Pick Up Tube To Filter (3 Pieces) 2013-Up | — |
| 996 | Part # 339996-1BK | Bracket Set, ZF9HP48 Holds Cooler Lines (4 Pieces) 2013-Up | — |
| 996 | Part # 339996-2BK | Tube Set, ZF9HP48 Cooler To Bell Housing (2 Pieces) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 421 | Part # 339421B | Solenoid, ZF9HP48 C Clutch (Orange Connector) 2013-Up… | — |
| 422 | Part # 339422B | Replaced by 339421B | — |
| 425 | Part # 339425B | Replaced by 339421B | — |
| 427 | Part # 339427B | Replaced by 339421B | — |
| 428 | Part # 339428B | Replaced by 339421B | — |
| 430 | Part # 339430B | Replaced by 339421B | — |
| 450 | Part # 339450B | Replaced by 339458B | — |
| 451 | Part # 339451B | Replaced by 339458B | — |
| 457 | Part # 339457B | Solenoid, ZF9HP48 Mechanical Park (Tan Connector) 2013-Up | — |
| 458 | Part # 339458B | Solenoid, ZF9HP48 Park Control (Black & White Connector) 2013-Up… | — |
| 740 | Part # 339740B | Valve Body, ZF9HP48 (10 Solenoid)(Cast # 1094 427 079 On Transmission Side & 1094 427 080 On Pan Side) 2013-Up | 2 |
| 991 | Part # 339991-3B | Rooster Comb, ZF9HP48 Linkage (No Detents) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 411 | Part # 339411B | Switch, ZF9HP48 Pressure Transducer (Black Connector) 2013-Up | — |
| 446 | Part # 339446B | Wire Harness, ZF9HP48 Internal (26 Pin Connector)(W/Speed Sensors & TRS) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 339010B | Filter, ZF9HP48 (948TE) (Plastic)(Long Oval Pick-Up) 2013-Up | — |
| 766 | Part # 339766B | Side Pan, ZF9HP48 (Plastic) (W/8 Bolts Attached)(Cast # 276.100.008.951) 2013-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 339070B | Seal, ZF9HP48 Front (.275”Thick)(2.370”OD)(1.760”ID) 2013-Up | — |
| 072 not on diagram | Part # 339072B | Seal, ZF9HP48 Linkage (.193”Thick)(.720”OD)(.367”ID) 2013-Up | — |
| 076 | Part # 339076B | Seal, ZF9HP48 Axle (Bell Houisng Side)(Inner)(2.650”OD)(1.675”ID) 2013-Up (Also Fits ZF9HP48 Axle(Case Side)(Inner)… | — |
| 077 | Part # 339077B | Replaced by 339076B | — |
| 081 | Part # 339081B | Seal, ZF9HP48 AWD Adapter (Inner)(2.840”OD)(1.705”ID) 2013-Up | — |
| 082 | Part # 339082-1B | Seal, ZF9HP48 Axle (Case Side)(Outer)(2.795”OD)(1.710”ID) 2013-Up | — |
| 082 | Part # 339082B | Seal, ZF9HP48 Axle (Bell Housing Side)(Outer)(2.685”OD)(1.470”ID) 2013-Up | — |
| 318 | Part # 339318B | Gasket, ZF9HP48 Bell Housing To Case (Metal) 2013-Up | — |
| 319 | Part # 339319B | Gasket, ZF9HP48 Hydraulic Cover Plate To Case (Bonded Metal) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 036 | Part # 339036B | Bushing, ZF9HP48 Stator (Front)(.500”Wide)(.950”OD)(.830”ID) 2013-Up | — |
| 039 | Part # 339039B | Bushing, ZF9HP48 E Clutch Hub (Front)(1.246”OD)(1.103”ID) 2013-Up | — |
| 040 | Part # 339040B | Bushing, ZF9HP48 E Clutch Hub (Rear)(1.246”OD)(1.111”ID) 2013-Up | — |
| 050 | Part # 339050B | Bushing, ZF9HP48 P2 Planet Ring Gear Hub (.300”Wide)(1.155”OD)(1.117”ID) 2013-Up | — |
| 213 | Part # 339213B | Bearing W/Races, ZF9HP48 “E” Clutch Drum To Hub (.141”Thick)(1.858”OD)(1.325”ID) 2013-Up | — |
| 214 | Part # 339214B | Washer, ZF9HP48 Support To “F” Dog Clutch Sun Gear (.195”Thick)(2.480”OD)(1.962”ID) (Stepped) 2013-Up | — |
| 217 | Part # 339217B | Washer, ZF9HP48 P4 Planet To P3 Planet (.155”Thick)(2.790”OD)(2.343”ID)(4 Tab)(Black Plastic) 2013-Up | — |
| 219 | Part # 339219B | Bearing W/Races, ZF9HP48 P3 Planet To P1 Ring Gear Hub (.148”Thick)(2.312”OD)(1.720”ID) 2013-Up | — |
| 223 not on diagram | Part # 339223B | Caged Needle Bearing, ZF9HP48 Input Shaft To Rear Ring Tower (.263”Thick)(.785”OD)(Split) (18 Needles) 2013-Up | — |
| 229 | Part # 339229B | Bearing W/Races, ZF9HP48 “B” Clutch Drum To Case (.142”Thick)(1.735”OD)(.987”ID) 2013-Up | — |
| 230 | Part # 339230A | Shim, ZF9HP48 “B” Clutch Drum To Case (Selective) 2013-Up | — |
| 238 | Part # 339238B | Bearing W/Races, ZF9HP48 P1 Ring Gear Hub To P1/P2 Planet (.142”Thick)(2.765”OD) (2.135”ID) 2013-Up | — |
| 242 | Part # 339242B | Dual Top Hat Bearing, ZF9HP48 P1/P2 Planet To Hub # 602 (.380”Thick)(2.820”OD) (Dual Set Of Needles) 2013-Up | — |
| 254 | Part # 339254B | Bearing W/Races, ZF9HP48 Hub # 604 To “C” Clutch Hub (.142”Thick)(2.707”OD)(2.132”ID) 2013-Up | — |
| 257 | Part # 339257B | Bearing W/Races, ZF9HP48 “C” Clutch Hub To “B” Clutch Drum (.143”Thick)(2.715”OD) (2.000”ID) 2013-Up | — |
| 273 | Part # 339273B | Cup Race, ZF9HP48 Pinion To Bell Housing (.570”Thick)(2.677”OD)(Cast # F581319.TR1) 2013-Up | 1 |
| 274 | Part # 339274B | Cone Bearing, ZF9HP48 Pinion To Bell Housing (22 Rollers)(1.575”ID)(Cast # F-581319.TR1) 2013-Up | 1 |
| 275 | Part # 339275B | Caged Needle Bearing, ZF9HP48 Transfer Shaft To Case (Cast # HK 2816 INA)(1.375”OD) 2013-Up | 1 |
| 276 | Part # 339276B | Ball Bearing, ZF9HP48 Transfer Shaft To Bell Housing (.785”Thick)(3.545”OD)(1.772”ID) (Cast # F-589874) 2013-Up | 1 |
| 277 | Part # 339277B | Shim, ZF9HP48 Pinion To Case (.044”Thick)(2.638”OD)(1.985”ID) 2013-Up | — |
| 279 | Part # 339279B | Ball Bearing, ZF9HP48 Support To Drive Transfer Gear (.905”Thick)(3.780”OD)(2.915”ID) (Cast # 0501 323 939) 2013-Up | 1 |
| 280 | Part # 339280B | Cup Race, ZF9HP48 Pinion To Case (.670”Thick)(3.545”OD)(Cast # F-577855.01.TR1) 2013-Up | 1 |
| 281 | Part # 339281B | Cone Bearing, ZF9HP48 Pinion To Case (20 Rollers)(1.970”ID)(Cast # F-577855.01.TR1) 2013-Up | 1 |
| 287 | Part # 339287B | Washer/Retainer, ZF9HP48 Under Nut # 795 (.220”Thick)(3.490”OD)(2.850”ID)(1 Tab) 2013-Up | — |
| 290 | Part # 339290B | Shim, ZF9HP48 Differential Bearing To Case (.058”Thick)(3.522”OD)(3.170”ID) 2013-Up | — |
| 291 | Part # 339291B | Cup Race, ZF9HP48 Differential To Bell Housing (.685”Thick)(3.545”OD) (Cast # F574896.02 TR1) 2013-Up… | 1 |
| 292 | Part # 339292B | Cone Bearing, ZF9HP48 Differential To Bell Housing (25 Rollers)(2.165”ID) (Cast # F574896.02.TR1) 2013-Up… | 1 |
| 295 | Part # 339295B | Caged Needle Bearing, ZF9HP48 Convertor To Bell Housing (.465”Thick)(2.365”OD) (Cast # F-560471) 2013-Up | 1 |
| 297 | Part # 339297B | Shim, ZF9HP48 Pump Drive Gear To Stator (.054”Thick)(2.440”OD)(2.112”ID) 2013-Up | — |
| 713 | Part # 339713B | Retainer Plate, ZF9HP48 Holds Transfer Shaft Bearing To Bell Housing (7 Bolt)(.160” Thick) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 339500B | Pump Assy, ZF9HP48 2013-Up | — |
| 507 | Part # 339507-1B | Diverter, ZF9HP48 Pump Bleed Off (Plastic)(Elbow) 2013-Up | — |
| 510 | Part # 339510-1B | Pump Housing, ZF9HP48 (Aluminum)(9 Bolts to Bell)(Cast # 1094-410-043) 2013-Up | 1 |
| 520 | Part # 339520-1B | Stator, ZF9HP48 (Steel)(3 3/8” Tall)(Cast # 1094.210.060A) 2013-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 339100B | Friction, ZF9HP48 E Clutch (.073”)(36 Teeth)(6 3/8”OD) 2013-Up | — |
| 106 | Part # 339106B | Friction, ZF9HP48 C Clutch (.091”)(48 Teeth)(8 3/16”OD) 2013-Up | — |
| 108 | Part # 339108B | Friction, ZF9HP48 B Clutch (.090”)(64 Teeth Outer)(5.521”ID) 2013-Up | — |
| 114 | Part # 339114B | Friction, ZF9HP48 D Clutch (.075”)(40 Teeth)(8 1/2”OD) 2013-Up | — |
| 120 | Part # 339120B | Steel, ZF9HP48 E Clutch (.083”)(36 Teeth)(5.795”ID) 2013-Up | — |
| 121 | Part # 339121B | Steel, ZF9HP48 E Clutch (.020”)(36 Teeth)(5.805”ID)(Waved) 2013-Up | — |
| 126 | Part # 339126B | Steel, ZF9HP48 C Clutch (.119”)(30 Teeth Dipped & 3 Wide Teeth)(7 5/15”ID) 2013-Up | — |
| 128 | Part # 339128B | Steel, ZF9HP48 B Clutch (.119”)(30 Teeth On ID)(6 7/16”OD) 2013-Up | — |
| 134 | Part # 339134B | Steel, ZF9HP48 D Clutch (.117”)(36 Teeth)(8”ID) 2013-Up | — |
| 140 | Part # 339140B | Pressure Plate, ZF9HP48 E Clutch (.149”)(36 Teeth)(5.790”ID) 2013-Up | — |
| 146 | Part # 339146B | Pressure Plate, ZF9HP48 C Clutch (.197”)(36 Teeth)(7 1/16”ID) 2013-Up | — |
| 148 | Part # 339148B | Pressure Plate, ZF9HP48 B Clutch (.131”)(30 Teeth On ID)(6 7/16”OD) 2013-Up | — |
| 154 | Part # 339154B | Pressure Plate, ZF9HP48 D Clutch (.131”)(36 Teeth)(8”ID) 2013-Up | — |
| 833 | Part # 339833B | Dog Clutch, ZF9HP48 “F” Dog (1.400” Wide)(2.378”OD)(With Inner Long & Short Dog Splines) (Uses Inner And Outer O-Ring)… | — |
| 835 | Part # 339835-1B | Piston, ZF9HP48 A Dog Gear (.825”OD)(1.077”Long) 2013-Up | — |
| 858 | Part # 339858B | Cushion, ZF9HP48 B Clutch (.044”)(30 Teeth On ID)(6 3/8”OD) 2013-Up | — |
| 960 | Part # 339960-1B | Piston, ZF9HP48 E Clutch (Bonded) (.310”Thick)(5.665”OD)(4.840”ID)(Presses Onto The E Clutch Drum) 2013-Up | — |
| 960 | Part # 339960B | Piston, ZF9HP48 E Clutch (Bonded)(.782”Thick)(6.210”OD)(2.215”ID) 2013-Up | — |
| 964 | Part # 339964B | Piston, ZF9HP48 C Clutch (Aluminum)(.923”Thick)(7 15/16”OD)(7 1/8”ID)(12 Castles) 2013-Up | — |
| 965 | Part # 339965-1B | Piston, ZF9HP48 B Clutch (Aluminum)(Inner)(.575”Thick)(3.965”OD)(2.436”ID) 2013-Up | — |
| 965 | Part # 339965B | Piston, ZF9HP48 B Clutch (Aluminum)(Outer)(.813”Thick)(6.185”OD)(2.470”ID) 2013-Up | — |
| 966 | Part # 339966-1B | Piston, ZF9HP48 D Clutch (Aluminum)(Rear)(.661”Thick)(9”OD)(7 7/16”ID) 2013-Up | — |
| 966 | Part # 339966B | Piston, ZF9HP48 D Clutch (Aluminum)(Front)(1.220”Thick)(8 7/8”OD)(7 1/4”ID)(12 Castles) 2013-Up | — |
| 970 | Part # 339970B | Spring, ZF9HP48 E Clutch Return (4.315”OD)(10 Fingers)(Dished) 2013-Up | — |
| 974 | Part # 339974B | Spring, ZF9HP48 D Clutch Return (.069”Thick)(8 1/4”OD)(12 Fingers)(Dished) 2013-Up | — |
| 975 | Part # 339975B | Spring, ZF9HP48 B Clutch Return (.065”Thick)(4.825”OD)(12 Fingers)(Dished) 2013-Up | — |
| 976 | Part # 339976B | Spring, ZF9HP48 D Clutch Return (.088”Thick)(8 7/8”OD)(12 Fingers)(Dished) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 525 | Part # 339525B | Chain, ZF9HP49 Pump Drive (36 Links) 2013-Up | — |
| 526 | Part # 339526B | Sprocket, ZF9HP48 Pump Drive (34 Teeth W/4 ID Flats For Convertor) 2013-Up | — |
| 550 | Part # 339550B | Drum, ZF9HP48 E Clutch (5 Clutch)(36 Teeth Steels) 2013-Up | — |
| 555 | Part # 339555B | Drum, ZF9HP48 B Clutch (Aluminum W/Steel Sleeve)(2.032”Tall) 2013-Up | — |
| 570 | Part # 339570B | Clutch Hub, ZF9HP48 E Clutch W/Shaft (36 Clutch Teeth)(5.107”Tall) 2013-Up | — |
| 575 | Part # 339575B | Clutch Hub, ZF9HP48 C Clutch (Outer) B Clutch (Inner)(Aluminum)(1.550”Thick) 2013-Up | — |
| 580 | Part # 339580B | Planet, ZF9HP48 P4 (4 Gear Steel)(Uses 42 Teeth Sun Gear) 2013-Up | — |
| 582 | Part # 339582B | Planet, ZF9HP48 P1/P2 (Aluminum Housing)(Uses A 42 Teeth Sun Gear # 612) 2013-Up | — |
| 586 | Part # 339586B | Planet, ZF9HP48 P3 (4 Gear Steel)(Uses 42 Teeth Sun Gear) (W/110 Teeth P4 Planet Ring Gear) 2013-Up | — |
| 592 | Part # 339592B | Ring Gear, ZF9HP48 P2 Planet (138 Teeth)(40 Outer Lugs)(7 11/16”OD) 2013-Up | — |
| 596 | Part # 339596B | Ring Gear, ZF9HP48 P3 Planet (110 Teeth)(36 Outer Lugs)(6 3/8”OD) 2013-Up | — |
| 602 | Part # 339602B | Hub, ZF9HP48 P2 Planet Ring Gear (40 D Clutch Splines)(This Hub Is Crimped To The P2 Ring Gear) 2013-Up | — |
| 604 | Part # 339604B | Hub, ZF9HP48 P1 Planet Ring Gear (86 Outer Teeth)(4.265”OD)(With Inner A Dog Splines) 2013-Up | — |
| 610 | Part # 339610B | Sun Gear, ZF9HP48 P3/P4 Planet With F Dog Clutch Splines (42 Teeth) 2013-Up | — |
| 612 | Part # 339612B | Sun Gear, ZF9HP48 P1 Planet (42 Teeth)(1.680” Long) 2013-Up | — |
| 614 | Part # 339614B | Sun Gear, ZF9HP48 P2 Planet (94 Teeth Outer)(W/86 Teeth Inner, P1 Planet Ring Gear) 2013-Up | — |
| 670 | Part # 339670B | Input Shaft, ZF9HP48 (12 7/8” Long) 2013-Up | — |
| 707 | Part # 339707B | Ring Gear, ZF9HP48 AWD Drive Transfer (69 Teeth)(12 Holes) 2013-Up | — |
| 708 | Part # 339708B | Transfer Shaft, ZF9HP48 (32 Teeth)(3.725”OD)(6 7/8”Long) 2013-Up | — |
| 710 | Part # 339710B | Gear, ZF9HP48 Dirve Transfer (55 Teeth)(1.490”Thick)(With Four 9 Spline Lugs) 2013-Up | — |
| 711 | Part # 339711B | Support, ZF9HP48 Drive Transfer Gear (Cast # 1094 477 061) 2013-Up | 1 |
| 716 | Part # 339716B | Differential Housing, ZF9HP48 AWD (12 Bolt Ring Gear)(25 Roller Bearing On Both Ends) 2013-Up | — |
| 720 | Part # 339720B | Ring Gear, ZF9HP48 Differential (69 Teeth)(12 Bolt)(1.985”Thick) 2013-Up | — |
| 730 | Part # 339730B | Pinion, ZF9HP48 (22 Teeth)(76 Teeth Driven Transfer Gear)(12 Park Lugs) 2013-Up | — |
| 750 | Part # 339750B | Bell Housing, ZF9HP49 AWD (Starter At 12:00)(Cast # 1094 422 175) 2013-Up | 1 |
| 757 | Part # 339757B | Hydraulic Cover Plate, ZF9HP48 (Aluminum)(Cast # 1094 401 123) (11 Bolt) 2013-Up | 1 |
| 759 | Part # 339759B | Rear Cover, ZF9HP48 To Case (Aluminum)(1.670”OD)(4 Bolt Holes) 2013-Up | — |
| 760 | Part # 339760B | Case, ZF9HP48 AWD (ZF9HP48 On Metal Tag)(Cast # 1094 401 133) 2013-Up | 1 |
| 835 | Part # 339835B | Gear, ZF9HP48 A Dog (1.200”Long)(2 Holes For Pin # 835-5) 2013-Up | — |
| 991 | Part # 339991-4B | Manual Shaft, ZF9HP48 (4.600” Long)(.392”OD) 2013-Up | — |
| 995 | Part # 339995B | Park Pawl Assembly, ZF9HP48 (5 Pieces) 2013-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 339010-2B | Outlet Tube, ZF9HP48 Filter To Oil Pump Housing (4 Bolt)(Plastic) 2013-Up | — |
| 215 | Part # 339215B | Washer/Oil Slinger, ZF9HP48 Support To P4 Planet (Black Plastic)(2.805”ID) 2013-Up | — |
| 288 | Part # 339288B | Replaced by U339291B | — |
| 289 | Part # 339289B | Replaced by U339292B | — |
| 465 | Part # 339465B | ECM, ZF9HP48 (58 Blade Connector)(Cast # 609-20969 0501 220945) 2013-Up | 1 |
| 492 | Part # 339492B | Drain Plug, ZF9HP48 On Bottom Of Bell Housing (8mm Allen) 2013-Up | — |
| 495 | Part # 339495-2B | Oil Tube, ZF9HP48 Valve Body To Pump Housing (Aluminum)(1.630”Long)(2nd, 3rd, 4th Ones Down) 2013-Up | — |
| 495 | Part # 339495-3B | Oil Tube, ZF9HP48 Valve Body To Pump Housing (Aluminum)(2.985”Long)(.906”OD) 2013-Up | — |
| 495 | Part # 339495-4B | Oil Tube, ZF9HP48 Valve Body To Drive Transfer Gear Support (1.752”Long)(Round On One End & Oval On One End) 2013-Up | — |
| 495 | Part # 339495-5B | Oil Tube, ZF9HP48 Valve Body To Filter (Aluminum)(2.828”Long)(.783”OD) 2013-Up | — |
| 689 not on diagram | Part # 339689-2B | Oil Guide, ZF9HP48 Transfer Shaft (2 Bolts To Case) 2013-Up | — |
| 698 | Part # 339698B | Oil Guide, ZF9HP48 Differential (2 Bolts To Bell) 2013-Up | — |
| 795 | Part # 339795B | Nut, ZF9HP48 Holds Driven “F” Dog Clutch To Support 2013-Up | — |
| 835 | Part # 339835-5B | Pin, ZF9HP48 A Dog Gear To Piston (.255”OD)(1.480”Long) 2013-Up | — |
| 843 | Part # 339843B | Clip, ZF9HP48 Holds Connector To Side Pan (2.168”Wide) 2013-Up | — |
| 861 | Part # 339861B | Snap Ring, ZF9HP48 Holds E Clutch Pressure Plate In (.109”Thick)(6 15/16”OD) 2013-Up | — |
| 862 | Part # 339862B | Snap Ring, ZF9HP48 Holds E Clutch Spring Retainer In (.068”Thick)(2.260”OD) 2013-Up | — |
| 866 | Part # 339866B | Snap Ring, ZF9HP48 Holds Ball Bearing To Drive Transfer Gear (.118”Thick)(4.025”OD) 2013-Up | — |
| 867 | Part # 339867B | Snap Ring, ZF9HP48 Holds “A” Dog Clutch In Support (.057”Thick)(2.600”OD) 2013-Up | — |
| 868 | Part # 339868B | Snap Ring, ZF9HP48 Holds Hub To P1 Planet Ring Gear (.057”Thick)(4.580”OD) 2013-Up | — |
| 877 | Part # 339877B | Snap Ring, ZF9HP48 Holds “C” Clutch Return Spring In (.119”Thick)(9”OD) 2013-Up | — |
| 878 | Part # 339878B | Snap Ring, ZF9HP48 Holds “C” Clutch Pressure Plate In Case (.069”Thick)(9 1/4”OD) 2013-Up | — |
| 879 | Part # 339879B | Snap Ring, ZF9HP48 Holds “B” Clutch Piston In (.077”Thick)(2.508”OD) 2013-Up | — |
| 880 | Part # 339880B | Snap Ring, ZF9HP48 Holds “A” Dog Clutch To Input Shaft (.045”Thick)(1.255”OD) 2013-Up | — |
| 887 | Part # 339887B | Snap Ring, ZF9HP48 Holds Ring Gear # 707 To Differential (.077”Thick)(5.410”OD) 2013-Up | — |
| 890 | Part # 339890-1B | Snap Ring, ZF9HP48 Holds Ring Gear # 707 To Differential (.117”Thick)(4.797”OD) 2013-Up | — |
| 890 | Part # 339890B | Snap Ring, ZF9HP48 Holds Ring Gear # 707 To Differential (.077”Thick)(5.610”OD) 2013-Up | — |
| 893 | Part # 339893B | Snap Ring, ZF9HP48 Holds “D” Clutch Piston In Case (.116”Thick)(9 1/2”OD) 2013-Up | — |
| 895 | Part # 339895B | Snap Ring, ZF9HP48 Holds Pump In Pump Housing # 510-1 (.127”Thick)(2.917”OD) (2 Bent Ends) 2013-Up | — |
| 896 | Part # 319896A | Snap Ring, ZF8HP45/845RE Holds Rotor To Pump Shaft (.032" Thick)(.362"OD) 2012-Up | — |
| 896 | Part # 339896-1B | Snap Ring, ZF9HP48 Holds Bearing # 275 In Case (.090”Thick)(1.465”OD) 2013-Up | — |
| 896 | Part # 339896B | Replaced by U319896A | — |
| 897 not on diagram | Part # 339897B | C-Clip, ZF9HP48 Holds Pump Shaft # 527 To Pump 2013-Up | — |
| 898 | Part # 339898B | Snap Ring, ZF9HP48 Holds Bearing # 295 In Bell Housing (.057”Thick)(2.480”OD) 2013-Up | — |
| 980 | Part # 339980B | Retainer, ZF9HP48 E Clutch Spring (.635”Thick)(5.280”OD) 2013-Up | — |
| 991 | Part # 339991-2B | Spring, ZF9HP48 Rooster Comb Linkage (Coil) 2013-Up | — |
| 994 | Part # 339994B | Park Actuator, ZF9HP48 (7 3/4” Long) 2013-Up | — |
| 998 | Part # 339998B | Cooler, ZF9HP48 External (3 Bolt To Bell Housing)(Aluminum) 2013-Up | — |
| 999 | Part # 339999-1B | Oil Tube, ZF9HP48 Pump Housing To Bell Housing (Steel)(C Shaped) 2013-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.