8HP70 / 8HP75 / 8HP90 parts diagram
Same diagram:
8HP75, 8HP90
Positions:
164 total, 139 on the diagram
Parts:
179 total, 17 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 002 not on diagram | Part # 329002A | Overhaul Kit, ZF8HP70 2009-Up | — |
| 004 not on diagram | Part # 329004A | Master L/Steels Kit, ZF8HP70 2009-Up | — |
| 006 not on diagram | Part # 329006A | Master W/Steels Kit, ZF8HP70 2009-Up | — |
| 030 not on diagram | Part # 319030A | Bushing Kit, ZF8HP45/845RE 2012-Up | — |
| 470 | Part # 329470AK | Rivit Kit, ZF8HP55 D Clutch Repair For Bonded Lip Seal In Drum (8 Pcs Of Threaded Torx Screws) | — |
| 564 not on diagram | Part # 309564A | Piston Kit, ZF8HP55 A Clutch (Piston Cast #1087 470 023) 2009-Up | 1 |
| 741 not on diagram | Part # S319741PK | Valve Kit ZF8HP45 Pressure Regulator Valve (Oversized)(Contains Valve & Sleeve)(Sonnax) (Must Use T-F-35740-TL) | — |
| 777 | Part # 329777AK | Bolt Set, ZF8HP70 Pump To Case (3.167”Long)(T50)(14 Pieces) 2009-Up | — |
| 779 not on diagram | Part # 319779AK | Bolt Set, ZF8HP45/845RE Bottom Pan To Case (13 Pieces) 2012-Up | — |
| 781 not on diagram | Part # 319781AK | Bolt Set, ZF8HP70 Extension Housing To Case (7 Pieces)(15mm Hex x 1.900”Long)(Allen) (4x4 Only) 2009-Up | — |
| 960 | Part # 329960AK | Piston Kit, ZF8HP70 (Bonded) 2009-Up (Contains 4 Pistons) (Includes (B) Brake Balance, (C) Clutch Apply, (E) Clutch, &… | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 420 not on diagram | Part # 319420A | Solenoid Assembly, 845RE (8 Solenoid) 2012-Up | — |
| 740 | Part # 319740AA | Valve Body, ZF8HP45 (9 Solenoids)(Cast # 1087-427-174)(W/O HIS)(A048 On Plate) 2012-Up | 1 |
| 747 not on diagram | Part # A319747A | Plate, ZF8HP70 Valve Body (Bonded)(Cast # 1087-327-175 W/ A048/B048 Stamped) | 3 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 444 | Part # 319444A | Connector, 845RE Case (Plastic) 2012-Up | — |
| 446 not on diagram | Part # 329446A | Wire Harness, ZF8HP70 Internal (16 Pin Connector)(W/TCM)(No HIS) 2009-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 765 | Part # 319765A | Pan, ZF8HP45 Bottom (Platic W/Filter)(4 Flat Magnets) (Rounded Pocket On Bottom For Start-Stop Acc.)(Also Some Non-HIS) | — |
| 765 | Part # 319765AA | Pan, 845RE Bottom (Plastic W/Filter) (4 Flat Magnets) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 319070A | Seal, ZF8HP45/845RE Front (2.800"OD)(2.050"ID) 2012-Up | — |
| 071 | Part # 309071A | Seal, ZF8HP55 Driven Pump Shaft (.830"OD)(.432"ID) 2009-Up | — |
| 072 | Part # 309072A | Seal, ZF8HP55 External Linkage (.715"OD)(.390"ID)(.195"Thick) 2009-Up | — |
| 074 not on diagram | Part # 319074AA | Seal, 845RE Rear Output Shaft (2.835”OD)(1.510”ID)(4WD) (Cast # 52854000AA) 2012-Up | 1 |
| 177 | Part # 319177AT | Sealing Ring, ZF8HP45/845RE Input Shaft (Front)(.076" Thick)(1.230"OD)(Teflon) 2012-Up (Also Fits #179) | — |
| 179 | Part # 319179AT | Replaced by 319177AT | — |
| 180 not on diagram | Part # 309180AT | Sealing Ring, ZF8HP55 Output Shaft (1.870"OD)(.103" Wide)(Teflon) 2009-Up | — |
| 300 | Part # 319300AW | Gasket, ZF8HP45/845RE Bottom Pan (Rubber) 2012-Up | — |
| 309 | Part # 319309A | Seal, ZF8HP45/845RE Pump Bolt (.707”OD)(.275”ID) (.040”/.080”Thick) 2012-Up | — |
| 310 | Part # 309310A | O-Ring, ZF8HP55 Stator (Outer) (8 1/8”)(.107”Thk) 2009-Up (Also Fits ZF8HP70) | — |
| 311 | Part # 309311A | O-Ring, ZF8HP55 Pump (Rear Cover)(.075"Thick)(2.345"OD) 2009-Up | — |
| 312 | Part # 309312A | Gasket, ZF8HP70 Bonded Lip Seal To D Clutch Drum (Used To Seal The Rivits To Drum While Changing The Bonded Lip Seal) | — |
| 313 | Part # 309313A | O-Ring, ZF8HP55 Pump (Front Cover)(2.665"OD)(.074"Thick) 2009-Up | — |
| 315 not on diagram | Part # 309315A | Seal, ZF8HP55 Pump (Rear Cover)(Teflon W/Bonded Rubber) (.124"Thick)(.755"OD)(.600"ID) 2009-Up | — |
| 324 | Part # 329324A | O-Ring, ZF8HP70 Thermo Element Cover To Bracket (.885”OD)(.076”Thick) 2009-Up | — |
| 331 | Part # 309331A | Lip Seal, ZF8HP55 C Clutch Piston (Outer) 2009-Up | — |
| 332 | Part # 309332-1A | O-Ring, ZF8HP55 E Clutch Hub (Rear)(1.765"OD)(.060"Thick) 2009-Up | — |
| 332 | Part # 309332A | O-Ring, ZF8HP55 E Clutch Hub (Rear)(1.805"OD)(.105"Thick) 2009-Up | — |
| 333 | Part # 309333A | Lip Seal, ZF8HP55 E Clutch Piston (Outer) 2009-Up | — |
| 334 | Part # 309334A | Lip Seal, ZF8HP55 A Clutch Piston (Outer) 2009-Up | — |
| 335 | Part # 309335A | Lip Seal, ZF8HP55 A Clutch Piston (Inner) 2009-Up | — |
| 336 | Part # 309336A | O-Ring, ZF8HP55 D Clutch Piston (Inner) 2009-Up | — |
| 337 | Part # 309337A | O-Ring, ZF8HP55 D Clutch Piston Retainer (Outer) 2009-Up | — |
| 338 | Part # 309338A | O-Ring, ZF8HP55 B Clutch Piston (Inner)(7"OD) 2009-Up | — |
| 339 | Part # 309339A | O-Ring, ZF8HP55 B Clutch Piston (Outer)(9 1/4"OD) 2009-Up | — |
| 347 not on diagram | Part # 319347-1A | O-Ring, ZF8HP45/845RE Case Connector (With 3 Lips) 2012-Up | — |
| 356 | Part # 309356A | O-Ring, ZF8HP55 C Clutch Inner Hub (.082"Thick)(1.210"ID) 2009-Up | — |
| 356 | Part # 329356AB | O-Ring, ZF8HP70 C Clutch Outer Hub To Input Shaft (Front)(1.775”OD)(.105”Thick) 2009-Up | — |
| 357 | Part # 309357A | O-Ring, ZF8HP55 C Clutch Inner Hub (.082"Thick)(1.190"ID) 2009-Up | — |
| 357 | Part # 329357AB | O-Ring, ZF8HP70 C Clutch Outer Hub To Input Shaft (Rear)(1.880”OD)(.105”Thick) 2009-Up | — |
| 378 not on diagram | Part # 329378A | O-Ring, ZF8HP70 Cooler Fitting To Adaptor (.813”OD)(.090”Thick) 2009-Up | — |
| 378 not on diagram | Part # 329378A-1 | O-Ring, ZF8HP70 Cooler Fitting To Line (.620”OD)(.075”Thick) 2009-Up | — |
| 379 | Part # 329379A | O-Ring, ZF8HP70 External Cooler Bracket To Case (On Transfer Tube)(.680”OD)(.105”Thick) 2009-Up | — |
| 379 | Part # 329379A-1 | Lathe Cut Seal, ZF8HP70 Bracket To Cooler (Green)(.235”Thick)(1.255”OD)(8 Dimples) 2009-Up | — |
| 380 | Part # 309380A | O-Ring, ZF8HP55 Input Shaft (Front) 2009-Up | — |
| 381 | Part # 329381A | O-Ring, ZF8HP70 Pump Body To Case (11 1/2”OD)(.118”Thick) 2009-Up | — |
| 965 | Part # 329965-1 | Lip Seal, ZF8HP55 D Clu (Bonded)(Rivits Into D Clutch Drum) (Must Use T-329586A To Install) 2009-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 036 | Part # 309036A | Bushing, ZF8HP55 Stator (Front) (.600"Wide)(1.208"OD) 2009-Up | — |
| 038 | Part # 309038A | Bushing, ZF8HP22 A Clutch Hub (Front)(Brass)(1.445"OD) (1.315"ID)(.275"Wide) 2009-Up | — |
| 039 | Part # 309039A | Bushing, ZF8HP55 A Clutch Hub (Rear)(Brass)(1.445"OD) (1.305"ID)(.450"Wide) (2 Straight Grooves) 2009-Up | — |
| 056 | Part # 309056A | Bushing, ZF8HP55 P4 Planet Sun Gear (Front)(.400" Wide) (1.040"ID) 2009-Up | — |
| 059 | Part # 309059A | Bushing, ZF6HP22 P4 Planet Sun Gear (Rear)(.400" Wide) (1.00"OD)(.875"ID) 2009-Up | — |
| 062 | Part # 309062A | Bushing, ZF8HP55 P4 Planet (.340"Wide)(.875"ID) 2009-Up | — |
| 203 | Part # 309203A | Cup Race, ZF8HP45/845RE Pump Drive To Stator Retainer (2.185”OD)(1.630”ID) 2012-Up | — |
| 209 | Part # 309209A | Needle Bearing, ZF8HP55 Stator (Rear)(1.515"OD)(.450"Thick) 2009-Up | — |
| 214 | Part # 309214A | Bearing W/Races, ZF8HP55 C Clutch Hub To P4 Sun Gear (.195"Thick)(1.900"OD)(1.245"ID) 2009-Up | — |
| 222 | Part # 309222A | Race, ZF8HP55 P3 Sun Gear To Planet (Stepped)(2.860"OD)(2.235"ID) 2009-Up | — |
| 232 | Part # 309232-1A | Cupped Race, ZF8HP55 Bearing To A Clutch Hub (2.705"OD) 2009-Up | — |
| 232 | Part # 319232A | Bearing W/Race, ZF8HP45/845RE Stator To A Clutch Hub (.157"Thick)(2.788"OD)(2.010"ID) 2012-Up (Also Fits #233) | — |
| 233 | Part # 329233A | Replaced by 319232A | — |
| 234 | Part # 309234A | Race, ZF8HP55 A Clutch Hub To P1 Planet Ring Gear (.101"Thick)(2.788"OD)(2.082"ID) 2009-Up | — |
| 235 | Part # 309235A | Bearing W/Races, ZF8HP55 E Clutch Hub To C Clutch Hub (.195"Thick)(1.895"OD)(1.245"ID) 2009-Up | — |
| 236 | Part # 309236A | Race, ZF8HP55 Ring Gear To P1 Planet (Front)(Cupped)(3.485"OD) 2009-Up | — |
| 237 | Part # 309237A | Bearing W/Race, ZF8HP55 Ring Gear To P1 Planet (Front)(3.180"OD)(2.005"ID)(.240"Thick) 2009-Up | — |
| 239 | Part # 329239A | Washer, ZF8HP70 Ring Gear To P1 Planet (Front & Rear)(Plastic)(6 Tabs)(3.085”ID)(Stepped) (Cast # 1087 331 041) 2009-Up | 1 |
| 240 | Part # 309240A | Race, ZF8HP55 P2 Planet (Rear)(Cupped)(3.185"OD)(1.920"ID) 2009-Up | — |
| 241 | Part # 309241A | Bearing W/Race, ZF8HP55 P2 Planet To Sun Gear (Rear)(Cupped)(3.510"OD)(2.275"ID) (.245"Thick) 2009-Up | — |
| 250 | Part # 309250A | Race, ZF8HP50 P3 Planet To E Clutch Hub (Top Hat)(3.030"OD)(1.980"ID)(.565"Tall) 2009-Up | — |
| 251 | Part # 309251A | Bearing W/Race, ZF8HP55 P3 Planet To E Clutch Hub (.155"Thick)(2.650"OD)(2.010"ID) 2009-Up | — |
| 270 | Part # 319270A | Caged Needle Bearing, ZF8HP70 Case To Output Shaft (Cast # F-559282.05) 2009-Up | 1 |
| 272 | Part # 329272A | Needle Brg W/Sleeve, ZF8HP70 Case (Rear)(Aluminum)(2.828”OD)(1.845”Tall)(1.570”ID) (6 Spokes)(Cast # 1087 414 012) | 1 |
| 287 not on diagram | Part # 319287BA | Shim, 845RE Ball Bearing To Yoke (.041”Thick)(1.867”OD) 2012-Up | — |
| 295 | Part # 319295A | Caged Needle Bearing, ZF8HP45/845RE Front Cover (.475" Thick)(2.350"OD)(Cast # F-560471) 2012-Up | 1 |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 510 | Part # 329510-1A | Pump Body, ZF8HP70 To Stator (11 1/2”OD)(14 Bolts) (Cast # 1087 410 067) 2009-Up | 1 |
| 532 | Part # 309532A | Rotor, ZF8HP55 Pump (.590"Thick) (12 Vane Slots) 2009-Up (2 Outer Grooves) | — |
| 533 not on diagram | Part # 309533A | Vane, ZF8HP55 Pump Rotor (.039"Thick)(.284"Wide) 2009-Up | — |
| 534 | Part # 309534A | Outer Slide, ZF8HP55 Pump (.591"Thick)(2 Outer Lugs) 2009-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 104 | Part # 309104A | Friction, ZF8HP55 E Clutch (.085"Thick) (32 Outer Teeth)(5.340"ID) 2009-Up (Takes 5) (Also Fits ZF8HP55 C Clutch)… | — |
| 106 | Part # 309106A | Friction, D Clutch (.085")(63 Teeth) (6.775"OD) 2009-Up | — |
| 108 | Part # 309108A | Friction, ZF8HP55 A Clutch (.061") (32 Teeth)(5.740"OD) 2009-Up | — |
| 110 | Part # 309110A | Friction, ZF8HP55 B Clutch (.080") (38 Teeth)(7.810"OD) 2009-Up | — |
| 119 not on diagram | Part # 319119BH | Friction Module, ZF8HP75 2018-Up | — |
| 119 not on diagram | Part # 329119A | Friction Module, ZF8HP70 2009-Up | — |
| 119 not on diagram | Part # 329119AH | Friction Module, ZF8HP70/8HP55 2010-Up (GPZ) | — |
| 121 | Part # 309121A | Steel, ZF8HP55 C Clutch (.015") (24 Inner Teeth)(6.360"OD) 2009-Up | — |
| 124 | Part # 309124A | Steel, ZF8HP55 E Clutch (.080"Thick)(24 Inner Teeth)(6.430"OD) 2009-Up (Also Fits ZF8HP55 C Clutch)(Takes 6) | — |
| 125 | Part # 309125A | Steel, ZF8HP55 E Clutch (.015") (22 Inner Teeth)(6.360"OD) 2009-Up | — |
| 126 | Part # 309126A | Steel, ZF8HP55 D Clutch (.076") (30 Teeth)(5.720"ID) 2009-Up | — |
| 127 | Part # 309127A | Steel, ZF8HP55 D Clutch (.018") (30 Teeth)(5.825"ID)(Waved) 2009-Up | — |
| 128 | Part # 309128A | Steel, ZF8HP55 A Clutch (.070") (30 Teeth)(6.020"OD) 2009-Up | — |
| 129 | Part # 309129A | Steel, ZF8HP55 A Clutch (.026") (30 Teeth)(Waved)(Bottom) 2009-Up | — |
| 130 | Part # 329130A | Steel, ZF8HP70 B Clutch (.069”) (35 Teeth)(6.802”OD)(Dipped Teeth) 2009-Up | — |
| 139 not on diagram | Part # 309139A | Steel Module, ZF8HP55 2013-Up | — |
| 144 | Part # 309144A | Pressure Plate, ZF8HP55 E Clutch (Top) (Selective)(6.425"OD) (24 Inner Teeth) 2009-Up (Also Fits ZF8HP55 C Clutch) | — |
| 146 | Part # 309146A | Pressure Plate, ZF8HP55 D Clutch (.115" Thick)(30 Teeth)(5.720"ID) 2009-Up | — |
| 148 | Part # 309148A | Pressure Plate, ZF8HP55 A Clutch (Top) (30 Teeth)(4.837"ID) 2009-Up | — |
| 150 | Part # 309150A | Pressure Plate, ZF8HP55 B Clutch (Top) (36 Teeth)(Selective)(6.805"ID) 2009-Up | — |
| 960 | Part # 309960A | Piston, ZF8HP55 C Clutch (Aluminum)(3.765"OD)(1.760"ID)(.735"Thick) 2009-Up | — |
| 962 | Part # 309962A | Piston, ZF8HP55 E Clutch (Aluminum)(Cast #1087 471 019) 2009-Up | 1 |
| 964 | Part # 309964A | Piston, ZF8HP55 A Clutch (Aluminum)(Cast # 1087 470 023)(5.678"OD (3.923"ID)(.835"Thick) 2009-Up | 1 |
| 965 | Part # 309965A | Piston, ZF8HP55 D Clutch (6.677"OD)(2.450"ID)(1.215"Thick) 2009-Up | — |
| 966 | Part # 309966A | Piston, ZF8HP55 B Clutch (Aluminum)(Cast #1087 472 044) 2009-Up | 1 |
| 970 | Part # 309970A | Spring, C Clutch Piston Return (.065"Thick)(4.495"OD) 2009-Up | — |
| 972 | Part # 309972A | Spring, ZF8HP55 E Clutch Piston Return (.070"Thick)(4.510"OD)(8 Lugs) 2009-Up | — |
| 974 | Part # 309974A | Spring, ZF8HP55 A Clutch Piston Return (5.240"OD) 2009-Up | — |
| 975 | Part # 309975A | Spring, ZF8HP55 D Clutch Return (.077")(4.960"OD)(12 Fingers) 2009-Up | — |
| 980 | Part # 309980A | Piston/Retainer, ZF8HP55 C Clutch (Bonded)(6.150"OD) 2009-Up | — |
| 982 | Part # 309982A | Piston/Retainer, ZF8HP55 E Clutch (Bonded) 2009-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 520 | Part # 309520A | Cover, ZF8HP55 Pump (Front)(Alum) 2009-Up | — |
| 525 | Part # 309525A | Chain, ZF8HP55 Pump Drive (33 Links)(.240"Thick)(Mouse Ear Links) 2009-Up | — |
| 526 | Part # 329526A | Sprocket, ZF8HP70 Pump Drive (2.019”Long W/O #s 699/ 202 & 203 Stacked On It) 2009-Up | — |
| 528 | Part # 309528A | Cover, ZF8HP55 Pump (Rear) (Aluminum) 2009-Up | — |
| 557 | Part # 309557A | Hub, ZF8HP55 D Clutch (Aluminum)(Cast #1087-478-030)(6 7/8"Tall) 2009-Up | 1 |
| 570 | Part # 309570-1A | Hub, ZF8HP55 C Clutch (Inner) (W/2 Inner & 2 Outer O-Rings) 2009-Up | — |
| 570 | Part # 309570A | Hub, ZF8HP55 C Clutch (Outer) (Alum)(Cast #1087 475 012) 2009-Up | 1 |
| 574 | Part # 309574A | Hub, ZF8HP55 E Clutch (Aluminum) (Cast #1087-471-023)(24 Outer Clutch Teeth)(38 Splines) 2009-Up | 1 |
| 580 | Part # 309580A | Planet, ZF8HP55 P2 (3 Gear) (48 Teeth Sun Gear) 2009-Up | — |
| 582 | Part # 329582A | Planet, ZF8HP70 P1 (4 Gear) (28 Teeth Sun Gear) 2009-Up | — |
| 584 | Part # 309584A | Planet, ZF8HP55 P3 (3 Gear) (Aluminum)(69 Teeth Sun Gear) 2009-Up | — |
| 586 | Part # 329586A | Planet, ZF8HP70 P4 With Output Shaft (4 Gear)(11 1/2”Long)(20 Park Lugs) 2009-Up | — |
| 590 | Part # 309590A | Ring Gear, ZF8HP55 P2 Planet (24 Lugs) 2009-Up | — |
| 592 | Part # 309592A | Ring Gear, ZF8HP55 P1 Planet W/Hub (40 Teeth Clutch Hub) 2009-Up | — |
| 594 | Part # 309594A | Ring Gear, ZF8HP55 P3 Planet (32 Tabs) 2009-Up | — |
| 596 | Part # 309596A | Ring Gear, ZF8HP55 P4 Planet (104 Teeth)(60 Outer Splines)(1.085"Thick) 2009-Up | — |
| 612 | Part # 309612A | Sun Gear, ZF8HP55 P1/P2 Planet (48 Teeth)(2.450"Long) 2009-Up | — |
| 614 | Part # 309614A | Sun Gear, ZF8HP55 P3 Planet (W/24 Tab Hub)(69 Teeth) 2009-Up | — |
| 616 | Part # 329616A | Sun Gear, ZF8HP70 P4 Planet With C & D Clutch Housing (28 Teeth)(7 7/8”Tall)(32 Clutch Splines)(No Grooves) 2009-Up | — |
| 626 | Part # 309626A | Output Shell, ZF8HP55 (Aluminum)(9 15/16"Long) 2009-Up | — |
| 670 | Part # 309670A | Input Shaft, ZF8HP55 (20 1/2" Long)(32 Converter Splines) 2009-Up | — |
| 674 | Part # 309674A | Hub, ZF8HP55 A Clutch (32 Clutch Splines)(3.155"Tall)(4.740"OD) 2009-Up | — |
| 697 | Part # 319697A | Housing, ZF8HP45/845RE Output Shaft Ring (Rear) In Case (2.584"OD)(1.891"ID)(Tin) 2012-Up | — |
| 760 | Part # 329760A | Case, ZF8HP70 (9 & 3 O’clock Starters)(4 Threaded Bosses On Driver Side)(2 Threaded Bosses On Pass. Side)(Non HIS)… | 1 |
| 760 | Part # 329760B | Case, ZF8HP70 (9 & 3 O’clock Starters)(10 Threaded Bosses On Driver Side)(9Threaded Bosses On Pass. Side)(Non HIS)… | 1 |
| 765 | Part # 329765A-5 | Thermo Element, ZF8HP70 (Brass)(With 2 Springs)(3.045”Long) 2009-Up | — |
| 956 | Part # 309956A | Housing, ZF8HP55 B Clutch Piston (Bonded)(1.130"Thick)(9 1/4"OD) 2009-Up | — |
| 995 | Part # 329995A | Park Pawl Assembly, ZF8HP70 (Internal)(6 Pieces) 2009-Up (#995-1 Is 4.770”Long) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 202 | Part # 309202A | Spacer Ring, ZF8HP45/845RE Pump Drive To Stator (1.795”OD)(1.600”ID)(.116”Thick) 2012-Up | — |
| 492 | Part # 329492A | Plug, ZF8HP70 External Cooler Bracket (Threaded)(14mm Hex)(1.010”Long) 2009-Up | — |
| 493 | Part # 319493A | Plug, ZF8HP70 Case (8mm)(Allen)(.675”Long) 2009-Up | — |
| 495 | Part # 319495A | Connector Tube, ZF8HP45/845RE Valve Body To Case (Aluminum)(1.055”Long) 2012-Up | — |
| 507 | Part # 309507-3A | Spring, ZF8HP55 Pump (Rear Cover)(Dished) 2009-Up | — |
| 535 not on diagram | Part # 309535A | Pin, ZF8HP55 Pump Outer Slide (1.082"Long)(.157"OD) 2009-Up | — |
| 699 | Part # 329699A | Waved Spring, ZF8HP70 Pump Drive To Stator (1.810”OD) (1.638”ID)(.012”Thick) 2009-Up | — |
| 761 | Part # 329761A-7 | Bracket, ZF8HP70 External Cooler (3 Bolts To Case) 2009-Up | — |
| 846 | Part # 329846A | Cap, ZF8HP70 Thermo Element (Plastic)(1.185”Long)(1.000”OD)(O-Ring Groove) 2009-Up | — |
| 860 | Part # 309860A | Snap Ring, ZF8HP70 Holds Needle Bearing In Stator (Rear)(1.615”OD)(.069”Thick) 2009-Up | — |
| 862 | Part # 309862A | Snap Ring, ZF8HP55 Holds C Clutch Piston In (.094"Thick)(1.905"OD) 2009-Up | — |
| 868 | Part # 309868A | Snap Ring, ZF8HP55 Holds P3 Sun Gear To Ring Gear (.073" Thick)(6.480"OD) 2009-Up | — |
| 874 | Part # 319874A | Snap Ring, ZF8HP45/845RE Holds E Clutch Piston To Hub (.117" Thick)(1.826"OD) 2012-Up | — |
| 876 | Part # 309876A | Snap Ring, ZF8HP55 Holds A Clutch Pressure Plate In (Selective) 2009-Up | — |
| 877 | Part # 309877A | Retainer, ZF8HP55 A Clutch Piston Spring (2 Piece) 2009-Up | — |
| 878 | Part # 309878A | Snap Ring, ZF8HP55 Holds D Clutch Pressure Plate In (Selective)(7 3/8"OD) 2009-Up | — |
| 879 | Part # 309879A | Snap Ring, ZF8HP55 Holds P4 Ring Gear To Output Shell (.050"Thick)(7 1/4"OD)(.230"Wide) (2 Eyelets) 2009-Up | — |
| 880 | Part # 309880A | Snap Ring, ZF8HP55 Holds Input Shaft To P2 Planet (.071"Thick)(1.860"OD) 2009-Up | — |
| 888 | Part # 309888A | Snap Ring, ZF8HP55 P3 Planet To D Clutch Hub (.072"Thick)(7.365"OD) 2009-Up | — |
| 889 | Part # 309889A | Snap Ring, ZF8HP55 Holds Ring Gear To E/C Clutch Drum (.075"Thick)(6.900"OD) 2009-Up | — |
| 890 | Part # 319890A | Snap Ring, ZF8HP45/845RE Holds Caged Needle Bearing To Case (.055" Thick)(2.800"OD) 2012-Up | — |
| 891 | Part # 319891A | Snap Ring, ZF8HP45/845RE Holds Output Ring Housing In Case (.076"Thick)(2.605"OD) 2012-Up | — |
| 892 | Part # 309892A | Snap Ring, ZF8HP55 P1 Planet To Output Shell (7.770"OD)(.075"Thick) 2009-Up | — |
| 893 not on diagram | Part # 319893A | Snap Ring, ZF8HP45/845RE Holds Ball Bearing To Case (.115" Thick)(3.052"OD) 2012-Up | — |
| 894 not on diagram | Part # 319894A | Snap Ring, ZF8HP70 Holds Extenson Housing (.057”Thick)(1.640”OD)(4x4) 2009-Up | — |
| 896 not on diagram | Part # 309896A | Snap Ring, ZF8HP55 Holds Rotor To Pump Shaft (.032"Thick)(.362"OD) 2009-Up | — |
| 898 | Part # 329898A | Snap Ring, ZF8HP70 Thermo Element To Bracket (1.077”OD) (.041”Thk) 2009-Up | — |
| 899 | Part # 309899A | Snap Ring, ZF8HP55 Holds Dished Spring To Pump Cover (.039"Thick)(2.360"OD)(.051"Wide) 2009-Up | — |
| 985 | Part # 309985A | Retainer, ZF8HP55 D Clutch Piston (Steel)(5.015"OD) 2009-Up | — |
| 991 | Part # 319991A | Linkage, ZF8HP45 Internal (5 Pieces) 2012-Up | — |
| 992 | Part # 329992A | Lever W/Mainshaft, ZF8HP70 (2.240”Long)(No Ball) 2009-Up | — |
| 996 not on diagram | Part # 319996A | Fitting, ZF8HP45/845RE Cooler Line (1.120”Long)(Threaded In Case)(Aluminum) 2012-Up | — |
| 996 not on diagram | Part # 319996B-4 | C-Clip, ZF8HP45/845RE Cooler Line Fitting (.945”Wide) (.720”Tall) 2009-Up | — |
| 997 | Part # 329997A | Transfer Tubes, ZF8HP70 External (Aluminum)(1.130”Long) (2 O-Ring Grooves) 2009-Up | — |
| 998 | Part # 329998A | Cooler, ZF8HP70 External (5 Bolt Holes)(2 3/4”Thick)(Finned Area 4 5/16” x 6 1/8”) 2009-Up | — |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.