42RE / 42RH / 44RE parts diagram
Same diagram:
40RH, 42RH, 44RE
Transmission page:
Positions:
216 total, 151 on the diagram
Parts:
675 total, 260 with a confirmed cross number
Kits:
Data as of:
2026-10-17
Point at a part on the diagram (tap it on a phone) to see its position. Click it to see the parts.
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 000 not on diagram | Part # 12000A | Paper & Rubber Kit, A904 1960-71 | — |
| 000 not on diagram | Part # 12000C | Paper & Rubber Kit, A904 (Except Colt, Arrow) 1972-Up | — |
| 000 not on diagram | Part # 12000D | Paper & Rubber Kit, A904 (Colt, Arrow) | — |
| 000 not on diagram | Part # 12000E | Paper & Rubber Kit, A500 1988-Up | — |
| 002 not on diagram | Part # 12002A | Overhaul Kit, A904 1960-71 | — |
| 002 not on diagram | Part # 12002C | Overhaul Kit, A904 (Except Colt, Arrow) 1972-Up (For 4x4 Sell 12074J) | — |
| 002 not on diagram | Part # 12002D | Overhaul Kit, A904 (Colt, Arrow) | — |
| 002 not on diagram | Part # 12002E | Overhaul Kit, A500 1988-Up | — |
| 004 not on diagram | Part # 12004A | Master L/Steels Kit, A904 1960-71 | — |
| 004 not on diagram | Part # 12004C | Master L/Steels Kit, A904 (Except Colt, Arrow) 1972-Up (For 4x4 Sell 12074J) | — |
| 004 not on diagram | Part # 12004D | Master L/Steels Kit, A904 (Colt, Arrow) | — |
| 004 not on diagram | Part # 12004E | Master L/Steels Kit, A500 1988-Up | — |
| 006 not on diagram | Part # 12006A | Master W/Steels Kit, A904 1960-71 | — |
| 006 not on diagram | Part # 12006C | Master W/Steels Kit, A904 (Except Colt, Arrow) 1972-Up (Except 1999-04 Jeep)(For 4x4 Sell 12074J Also) | — |
| 006 not on diagram | Part # 12006CA | Master W/Steels Kit, A904 1999-04 (Jeep Only)(Has V Notched Direct Steels) | — |
| 006 not on diagram | Part # 12006D | Master W/Steels Kit, A904 (Colt, Arrow) | — |
| 006 not on diagram | Part # 12006E | Master W/Steels Kit, A500 1988-Up (Except 1999-04 Jeep) | — |
| 006 not on diagram | Part # 12006EA | Master W/Steels Kit, A500 1999-04 (Jeep Only)(Has V Notched Direct Steels) | — |
| 011 not on diagram | Part # 12011A | Filter Kit, A904 Small Dacron Filter 1960-Up | — |
| 011 not on diagram | Part # 12011B | Filter Kit, A904 Small Brass Filter | — |
| 011 not on diagram | Part # 12011C | Filter Kit, A904 Large Dacron Filter | — |
| 011 not on diagram | Part # 12011D | Filter Kit, A904 Large Brass Filter | — |
| 011 not on diagram | Part # 12011E | Filter Kit, A727/A518/A618 Combo Small Dacron 1962-Up | — |
| 011 not on diagram | Part # 12011G | Filter Kit, A727/A518/A618 Combo Large Dacron 1962-Up | — |
| 011 not on diagram | Part # 12011H | Filter Kit, A904 (Colt, Arrow) Large Dacron Filter | — |
| 030 not on diagram | Part # 12030 | Bushing Kit, A904 1960-65 | — |
| 030 not on diagram | Part # 12030B | Bushing Kit, A904/A500 (W/Out Overdrive Section) 1965-E92 | — |
| 030 not on diagram | Part # 12030BA | Bushing Kit, A904/A500 (W/Out Overdrive Section) L1992-Up | — |
| 030 not on diagram | Part # 12030E | Bushing Kit, A500 (Overdrive Section Only) 1988-Up | — |
| 030 not on diagram | Part # 12030EB | Bushing Kit, A500 Complete W/Overdrive Section 1988-E92 | — |
| 030 not on diagram | Part # 12030EC | Bushing Kit, A500 Complete W/Overdrive Section L1992-E99 | — |
| 030 not on diagram | Part # 12030ED | Bushing Kit, A500 Complete W/Overdrive Section L1999-Up | — |
| 106 | Part # 12106HPK | Friction Kit, A904/A500 Direct (.086”) (Hi-Performance)(4 Per Kit) | — |
| 108 | Part # 12108HPK | Friction Kit, A904/A500 Forward (.061”) (Hi-Performance)(4 Per Kit) | — |
| 169 not on diagram | Part # T22169 | Reprogramming Kit, A727 (Heavy Duty & Hi-Performance) (Transgo) | — |
| 169 not on diagram | Part # T22169B | Reprogramming Kit, A500 (Heavy Duty & Hi-Performance) (Transgo) (Will Not Work On 2003-Up 48RE, Sell T22165G) | 1 |
| 171 not on diagram | Part # T22171 | Reprogramming Kit, A727 (Full Race) (Transgo) | — |
| 173 not on diagram | Part # T22173 | Reprogramming Kit, A727 (Manual Shift) (Transgo) | — |
| 173 not on diagram | Part # T22173B | Reprogramming Kit, A500 (Manual Shift) (Transgo) | 1 |
| 175 not on diagram | Part # 12175 | Ring Kit, A904 Complete 1960-77 (11 Pieces) | — |
| 175 not on diagram | Part # 12175B | Ring Kit, A904 Short 1960-Up (6 Pieces) | — |
| 175 not on diagram | Part # 12175C | Ring Kit, A904 Complete 1967-95 | — |
| 175 not on diagram | Part # 12175CT | Ring Kit, A904 Complete (Teflon) 1967-Up | — |
| 175 not on diagram | Part # 12175E | Ring Kit, A500 1988-Up | — |
| 175 not on diagram | Part # 12175ET | Ring Kit, A500 (Teflon) 1988-Up | — |
| 175 not on diagram | Part # 17175D | Ring Kit, A904 Colt | — |
| 200 not on diagram | Part # 12200 | Washer Kit, A904 1968-74 | — |
| 200 not on diagram | Part # 12200A | Washer Kit, A904 (W/Out Selectives) (9 Washers) 1974-Up | — |
| 200 not on diagram | Part # 12200AA | Washer Kit, A904 (W/Selectives) (12 Washers) 1979-89 | — |
| 200 not on diagram | Part # 12200AB | Washer Kit, A904 1960-67 | — |
| 200 not on diagram | Part # 12200B | Washer Kit, A500 (W/Out Selectives) 1988-Up (Does Not Have 12238C) | — |
| 201 not on diagram | Part # 12201A | Bearing Kit, A500 1989-Up (Torrington) | — |
| 213 | Part # S12213K | Race Kit, A500 Overdrive Piston To Hub (Sonnax)… | 1 |
| 232 | Part # 12232DS | Shim Kit, A500 (Goes Under # 232 Washer)(3 Each .015” & .025” Shims)(Superior) | 1 |
| 239 not on diagram | Part # S12239AK | Shim Kit, A904/A500 (Goes Under # 238) (10 Per Kit) Sonnax | 1 |
| 390 not on diagram | Part # 12390 | External Seal Kit, A904 1966-Up | — |
| 420 | Part # 12420BK | Solenoid Kit, A500 Overdrive & Lock-Up (8 Pin Case Connector) (W/4 Pin Governor Sensor) 1993-99… | — |
| 432 | Part # 12432AK | Repair Kit, A500 Governor Pressure Solenoid 1994-Up (Transgo) (Fixes 8 Solenoids) | — |
| 432 | Part # 12432BK | Conversion Kit, A518/A618/48RE Governor Solenoid (Converts The Governor Solenoid To Use The GM # 34435B Solenoid)… | — |
| 445 not on diagram | Part # 12445BK | Repair Kit, A500 External Wire Harness (8 Pin Connector W/8 Crimp Style Connectors) 1993-Up (Rostra) | — |
| 555 | Part # 12555CAK | Drum Kit, A904/A500 Direct (4 Clutch Made Into A 6 Clutch) (2 Bushing) Outer O-Ring #337 Goes On The Piston 1992-Up… | — |
| 564 not on diagram | Part # 12564 | Piston Kit, A904/A500 For All Forward Drums | — |
| 565 not on diagram | Part # 12565 | Piston Kit, A904/A500 For 4 Clutch Direct Drum 1971-91 | — |
| 565 not on diagram | Part # 12565A | Piston Kit, A904/A500 For 5 Clutch Direct Drum 1976-91 | — |
| 565 not on diagram | Part # 12565B | Piston Kit, A904/A500 For 4 & 5 Clutch Direct Drum 1992-Up (Fits Drum W/2 Bushings) | — |
| 565 not on diagram | Part # 12565D | Piston Kit, A904/A500 Direct (Piston Uses No O-Rings) 1998-Up | — |
| 580 | Part # 12580ABK | Planet Kit, A500 Overdrive (4 Gear) (W/15 Degree Teeth) 1995-Up (Sun Gear Has 1 I.D. Groove) Contains: From # 864 To #… | 1 |
| 580 | Part # 12580AK | Planet Kit, A500 Overdrive (4 Gear) (W/22 Degree Teeth) 1989-94 (Sun Gear Has No I.D. Groove) Contains: From # 864 To #… | — |
| 580 | Part # 12580BBK | Planet Kit, A500 Overdrive (5 Gear) (W/15 Degree Teeth) 1995-Up (Sun Gear W/1 I.D. Groove) Contains: From # 864 To #… | 1 |
| 580 | Part # 12580CAK | Planet Kit, A500 Overdrive (6 Gear) (W/15 Degree Teeth) 1995-Up (Contains: Planet, Sun Gear, Ring Gear & # 12220) | — |
| 580 | Part # 12580CK | Planet Kit, A500 Overdrive (6 Gear) (W/22 Degree Teeth) 1989-94 (Contains: Planet, Sun Gear, Ring Gear & #12220) | — |
| 665 | Part # 12665K | Outer Race Kit, A904 Rear Sprag (Bolt In Outer Race & Retainer) 1960-89 (This Kit Replaces The 7 Rivet Outer Race) | — |
| 678 | Part # S22678PAK | Pin/Plug Kit, A500 Pilot Pin (Goes Into The Intermediate Shaft) With Orifice Plug For Rear Of Shaft 1990-Up (Sonnax) | — |
| 681 not on diagram | Part # 12681B-2K | Repair Kit, A518 Governor (With Weights & Springs) | — |
| 741 not on diagram | Part # 12741CK | Spring Kit, A727 Lock-Up Delay (Spring & Plate) | — |
| 741 not on diagram | Part # S12741D-6K | Plug Kit, A727/A518/A618/48RE Valve Body Governor Bore… | — |
| 741 not on diagram | Part # S12741NCK | Sure Cure kit, A500 (Sonnax) | — |
| 741 not on diagram | Part # S12741NHPK | Throttle Vlave Kit, A727/A518/A618/48RE (High Performance) (Sonnax) | — |
| 741 not on diagram | Part # S12741NK | Throttle Valve Kit, A727/A518/A618/48RE (Valve, Plunger, Springs & Sleeve) Sonnax | — |
| 741 not on diagram | Part # S12741NOK | Throttle Valve Kit, A727/A518/A618/48RE (Oversize) (Valve, Plunger, Springs & Sleeve) Sonnax… | — |
| 741 not on diagram | Part # S12741P-6K | Plug Kit, A904 Regulated Pressure Valve plugs (Sonnax) | — |
| 761 not on diagram | Part # S22761S-2K | Sleeve Adapter Kit, A500 Neutral Safety Switch… | — |
| 777 | Part # 12777K | Bolt Set, A904/A500 Pump To Case | — |
| 778 not on diagram | Part # 12778K | Bolt Set, A604/A500 Stator To Pump Body | — |
| 779 | Part # 12779K | Bolt Set, A904 Pan To Case | — |
| 781 not on diagram | Part # 12781AK | Bolt Set, A500 Extension Housing Top Case (7/16” Hex Head) | — |
| 781 not on diagram | Part # 12781K | Bolt Set, A904 Extension Housing To Case | — |
| 782 | Part # 12782K | Bolt Set, A904 Valve Body To Case | — |
| 787 not on diagram | Part # 22787K | Bolt Set, A727/A518/A618/48RE Holds Governor To Support | — |
| 789 not on diagram | Part # 12789AK | Bolt Set, A727/A518 Output Shaft Bearing Cover To Extension Housing (Phillips Head) (2 Per Set) | — |
| 789 not on diagram | Part # 12789BK | Bolt Set, A727/A518/A618/48RE Output Shaft Bearing Cover To Extension Housing (Torx Head)(2 Per Set) | — |
| 790 not on diagram | Part # 12790K | Bolt Set, A500 Overdrive Retainer (Or Rear Support) To Case (6 Pieces) | — |
| 790 not on diagram | Part # 22790K | Bolt Set, A727 Output Support To Case (4 Bolt) 1962-Up | — |
| 991 | Part # S12991-2K | Detent Ball & Spring Kit, A727/A518/A618/48RE Valve Body Rooster Comb (Contains: Sleeve & Detent Ball)… | — |
| 996 | Part # 12996CK | Repair Kit, A727/A518 Cooler Line Fitting (With 1/4” Pipe Fittings) A Fix For Cracked Cases At The Cooler Fittings… | — |
| 996 | Part # 12996D-5K | Clip Kit, A904/A500 Push In Cooler LIne (6 Clips & O-Rings) (For 1/2” Cooler Lines) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 165 not on diagram | Part # S22165 | Valve Body Kit, A727 (Superior) 1962-Up | 1 |
| 165 not on diagram | Part # T22165 | Valve Body Kit, A727 (No Yo-Yo) (Transgo) 1962-Up | 2 |
| 167 not on diagram | Part # S22167 | Valve Body Kit, A500 (Gas/Diesel) Superior 1989-98 (Can Use S22167A) | 1 |
| 167 not on diagram | Part # S22167A | Valve Body Kit, A500 (Gas/Diesel) (Superior) 1999-03 | 1 |
| 167 not on diagram | Part # T22167 | Valve Body Kit, A500 Jr. (Gas Only) (Transgo) 1989-Up (For 48RE 2003-Up Use T22165G) | 2 |
| 171 not on diagram | Part # A22171 | Valve Body Kit, A727 (Fairbanks) 1962-Up | 1 |
| 171 not on diagram | Part # A22171B | Valve Body Kit, A500 (Transaction Kit) (Fairbanks) 1989-98 | 1 |
| 420 | Part # 12420 | Solenoid, A500 Overdrive & Lock-Up (3 Pin Case Connector)(With TFT) 1988-95 | 1 |
| 420 | Part # 12420B | Solenoid, A500 Overdrive & Lock-Up (8 Pin Case Connector) (W/4 Pin Oval Governor Sensor Connector) 1996-99 | 1 |
| 420 | Part # 12420C | Solenoid, A500 Overdrive & Lock-Up (8 Pin Case Connector) (With 4 Blade Rectangle Governor Sensor Connector) 2000-Up | 2 |
| 425 not on diagram | Part # 12425 | Solenoid, A904 Lock-Up (1 Wire) L1987-Up | 1 |
| 425 not on diagram | Part # 12425AA | Solenoid, A904 Lock-Up (2 Wire) 1996-Up | — |
| 432 | Part # 12432A | Solenoid, A500 Governor Pressure 1994-Up (Most) | 1 |
| 680 | Part # 12680 | Governor, A904 (Large Valve 1.002:OD) 1960-Up | — |
| 680 | Part # 12680A | Governor, A904 (Large Valve 1.070”OD) 1960-Up | — |
| 680 | Part # 12680B | Governor, A500 (Large Valve Is Steel 1.070”OD)(W/Keyway Slot In Aluminum Body) 1989-95 | — |
| 680 | Part # 12680C | Governor, A500/518 (Large Valve Is Brass 1.070”OD)(W/Keyway Slot In Aluminum Body) 1989-95 | — |
| 681 not on diagram | Part # 12681A-1 | Valve, A500 Governor (Small, Steel) Superior | — |
| 681 not on diagram | Part # S12681A-1 | Valve, A500 Governor (Small, Aluminum) (Sonnax) | — |
| 740 | Part # 12740 | Valve Body, A904 Non Lock-Up 1972-86 | — |
| 740 | Part # 12740-1 | Valve Body, A904 1960-65 | — |
| 740 | Part # 12740A | Valve Body, A904 Lock-Up 1978-86 | — |
| 740 | Part # 12740AA | Valve Body, A904 Lock-Up (W/1 Wire Single Solenoid) 1987-Up | — |
| 740 | Part # 12740B | Valve Body, A904 Lock-Up (W/2 Wire Single Solenoid)(Uses A Screw In Neutral Safety Switch) 1996-Up | — |
| 740 | Part # 12740B-1 | Valve Body, A904 Lock-Up (W/2 Wire Single Solenoid)(Uses A Push In Neutral Safety Switch) 2001-Up | — |
| 740 | Part # 12740BA | Valve Body, A500 (W/1 Single Solenoid) | — |
| 740 | Part # 12740C | Valve Body, A500 (With 2 Solenoids) | — |
| 740 | Part # 12740CA | Valve Body, A500 (With 2 Solenoids & Boost Valve Tube) 1989-93 | — |
| 740 | Part # 12740CB | Valve Body, A500 (With 2 Solenoids & Boost Valve Tube) 1994-Up | — |
| 740 | Part # 12740E | Valve Body, A500 (W/3 Solenoids & 1 Round Sensor) 3 Pin Governor Solenoid 1989-93 | — |
| 740 | Part # 12740EA | Valve Body, A500 (W/3 Solenoids & 1 Round Sensor) 4 Pin Governor Solenoid 1989-93 | — |
| 740 | Part # 12740EB | Valve Body, A500 (W/3 Solenoids & 1 Round Sensor) 3 Pin Governor Solenoid 1994-99 (Can Use 12740EC) | — |
| 740 | Part # 12740EC | Valve Body, A500 (W/3 Solenoids & 1 Round Sensor) 4 Pin Governor Solenoid 1994-99 | — |
| 740 | Part # 12740ED | Valve Body, A500 (W/3 Solenoids & 1 Square Sensor) 4 Pin Governor Solenoid 2000-Up… | — |
| 740 | Part # 12740G | Valve Body, A500 (W/3 Solenoids & 1 Square Sensor) 4 Pin Governor Solenoid 2001-02… | — |
| 740 | Part # 12740GA | Valve Body, A500 (W/3 Solenoids & 1 Square Sensor) 4 Pin Governor Solenoid 2003-04… | — |
| 740 | Part # S12740POS-1 | Valve, A727/A518 Lube Pressure Regulated Valve (Sonnax)(Oversize)(Must Use Tool # T-F-22771A-TL7 & T-VB-Fix)… | — |
| 741 not on diagram | Part # 12741A-1 | Switch Valve, A518/A618/48RE Prevents Lock-Up Shudder | — |
| 741 not on diagram | Part # 12741A-5 | Check Ball, A727/A518/A618/48RE (11/32”) (Torlon) | — |
| 741 not on diagram | Part # S12741AOS-1 | Switch Valve, A500 (Oversize) (Sonnax) Must Use Reamer T-22771A-TL13 | — |
| 741 not on diagram | Part # S12741M-1 | Manual Valve, A727/A518/618/48RE (Allows Converter Charge In Park)(Sonnax) | — |
| 741 not on diagram | Part # S12741P-1 | Valve, A727/A518/A618/48RE Lube Pressure Regulated Valve (Reduces Converter Drain Back)(Sonnax) | — |
| 747 not on diagram | Part # 12747EA | Plate, A500 Valve Body (W/Out Lock-Up Boost Tube) 1988-94 (Transgo) | — |
| 747 not on diagram | Part # 12747EB | Plate, A500 Valve Body 1995-03 (Transgo) | — |
| 925 not on diagram | Part # 12925 | Accumulator Assembly, A904/A500 (Aluminum) 1960-Up | — |
| 991 | Part # 12991A-3 | Rooster Comb, A727 (Has No Plastic Insulator For Neutral Safety Switch) 1965-E70 | — |
| 991 | Part # 12991B-3 | Rooster Comb, A727 (Has A Long Plastic Insulator For The Neutral Safety Switch) L1970-77 | — |
| 991 | Part # 12991C-3 | Rooster Comb, A727 (Has A Long Plastic Insulator For The Neutral Safety Switch) 1978-88 | — |
| 991 | Part # 12991D-3 | Rooster Comb, A727/A518/A618/48RE (Has A Long Plastic Insulator For The Screw In Neutral Safety Switch) 1989-01 | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 410 | Part # 12410 | Neutral Switch, A404/413/470/670 (Long) | 1 |
| 410 | Part # 12410A | Neutral Switch, A404/413/470/670 (Short) | 2 |
| 410 | Part # 12410B | Neutral Switch, A727/A518/A618 (Screw-In)(3 Prong Short) (Clip On Connector) 1996-03 | — |
| 410 | Part # 12410C | Neutral Switch, A500/A518/A618/48RE (Push-In)(5 Prong) 6/2002-Up (Cast # 56045489AC) Square Body(2 Bolt) | 1 |
| 415 | Part # 12415A | Sensor, A500 Governor Pressure (3 Pin) 1989-95 (Transducer) | 1 |
| 415 | Part # 12415B | Sensor, A500 Governor Pressure (4 Pin Round Connector)(Transducer)(With TFT) 1996-99 | 1 |
| 415 | Part # 12415C | Sensor, A500 Governor Pressure (4 Blade Rectangular Connector) (Black Plastic) (Transducer) (With TFT) 2000-Up | 1 |
| 436 | Part # 92436 | Sensor, A500SE (42RE) Output Speed Sensor (.928”OD Threads) | 1 |
| 444 not on diagram | Part # 12444A | Connector, A904 Case (Pass Thru) (1 Wire) L1987-Up | — |
| 444 not on diagram | Part # 12444B | Connector, A904 Case (Pass Thru) (2 Wire) 1996-Up | — |
| 445 not on diagram | Part # 12445A | Wire Harness, A500 External Lock-Up Eliminator | — |
| 774 not on diagram | Part # 12774-436 | Sensor, A727/A518/A618/48RE Speed (Screws Onto The 12774)(With 2 Pin Oval Connector) (Takes Place Of A Cable) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 010 | Part # 12010A | Filter, A727 Small Dacron (2 Hole) 1962-Up | 1 |
| 010 | Part # 12010B | Filter, A727 Small Brass 1962-Up | 1 |
| 010 | Part # 12010C | Filter, A727/A518/A618 Large Dacron 1962-03 | 1 |
| 010 | Part # 12010D | Filter, A727/A518/A618 Large Brass 1962-03 | — |
| 010 | Part # 12010J | Filter, A500 1998-Up (Metal & Plastic) | 1 |
| 014 not on diagram | Part # 12014 | Filter, A904 Governor 1966-Up | 1 |
| 018 not on diagram | Part # 12018 | Screen, A604 Valve Body Regulator Feed | — |
| 484 not on diagram | Part # 12484 | Orifice Screen, A500 For Overdrive Piston Retainer | 1 |
| 765 | Part # 12765 | Pan, A904 1960-Up (14 Holes) | — |
| 765 | Part # 12765A | Pan, A904 (Small Pan) Colt/Arrow Type (14 Holes) | — |
| 765 | Part # 12765B | Pan, A500 (2.420” Deep) With No Step In Bottom | 1 |
| 765 | Part # 12765C | Pan, A500 (2.920” Deep) With Step In Bottom | — |
| 765 | Part # 12765D | Pan, A500 (3.155” Deep) With No Step In Bottom 1998-Up (Uses The Metal/Plastic Filter) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 070 | Part # 12070 | Seal, A404/413/470/670 Front (Without Flange)(.363” Thick) | 1 |
| 070 | Part # 12070A | Seal, 42RLE Front (With Flange) 2003-Up | — |
| 072 not on diagram | Part # 22072 | Seal, A404/413/470/670 Manual Shaft (1/4” Thick) 1966-Up | 1 |
| 072 not on diagram | Part # 22072A | Seal, A727/A518/A618/48RE Manual Shaft (3/8” Thick) 1966-Up | 1 |
| 074 | Part # 12074A | Seal, A904 Rear (1.692”OD) 1960-65 (1.153”ID) | — |
| 074 | Part # 12074B | Seal, A904 Rear W/Boot 1965-72 | 1 |
| 074 | Part # 12074D | Seal, A904/A500 Rear W/Boot 1973-Up | 1 |
| 074 | Part # 12074E | Seal, A904/A500 Rear W/Out Boot 1973-Up | — |
| 074 | Part # 12074EA | Seal, A727/A518/A618 Rear W/O Boot (2.053”OD)(1.422”ID) 1965 Only | — |
| 074 | Part # 12074J | Seal, 42RLE Extension Housing 4x4 (2.568”OD) 2003-Up | 1 |
| 074 | Part # 12074M | Seal, A904 Extension Housing (Mitsubishi, Dodge, D-50) | — |
| 074 | Part # 36074 | Seal, 42RLE (Rear)(2.506”OD)(Without Boot) | 4 |
| 074 | Part # 36074B | Seal, 42RLE (Rear)(2.506”OD)(With Boot) | 1 |
| 078 not on diagram | Part # 44078A | Seal, 250/250C/350/350C Speed-O Shaft (Rubber, W/Spring) 1969-86 | 2 |
| 177 | Part # 12177 | Ring, A904 Input Shaft (Butt Joint) (1.062”OD) (Metal) 1960-67 (1.055”OD) | 1 |
| 177 | Part # 12177A | Ring, A404/413 Input Shaft (1.062”OD) (Metal) 1978-85 | 1 |
| 177 | Part # 12177AT | Ring, A404/413 Input Shaft (1.062”OD) (Teflon) 1978-86 | 1 |
| 178 | Part # 12178A | Ring, A55 Sun Gear | 2 |
| 178 | Part # 12178B | Ring, A904/A500 Rear Clutch Drum (Forward) (1.560”OD) (Metal) 1978-Up | 1 |
| 178 | Part # 12178BT | Ring, A904/A500 Rear Clutch Drum (Forward)(1.560”OD)(Teflon) 1978-Up | — |
| 179 | Part # 12179 | Ring, A500 Stator Support (2.062”OD) (Metal) 1988-Up A904 1960-2003 | 1 |
| 179 | Part # 12179A | Ring, 42RLE Stator (2.062”OD) (Metal) (Seal Plated) 2003-Up | 1 |
| 189 | Part # 12189 | Ring, A727 Governor (2.250”OD) (Butt Joint) (Metal) 1962-94 | 1 |
| 189 | Part # 12189A | Ring, A727 Governor (2.250”OD) (Lock Joint) (Metal) 1962-94 | 1 |
| 189 | Part # 12189B | Ring, A500 Governor (Metal) 1989-Up | — |
| 191 not on diagram | Part # 12191 | Ring, A904 Accumulator Piston (Small) (1.062”OD) 1960-86 (Use 12177A) | 1 |
| 191 not on diagram | Part # 12191A | Ring, A904/A500 Accumulator Piston (Small) (Metal) 1987-Up | 1 |
| 191 not on diagram | Part # 12191C | Ring, A500 3-4 Accumulator Piston (Small, In Valve Body) 1989-Up | — |
| 192 | Part # 12192 | Ring, A404/413/470/670 Accumulator (Large) 2.000”OD (Metal) 1978-Up | 1 |
| 192 | Part # 12192C | Ring, A500 3-4 Accumulator Piston (Large, In Valve Body) 1989-Up | 1 |
| 192 | Part # 12192T | Ring, A404/413/470/670 Accumulator (Large) 2.000”OD (Teflon) 1978-Up | — |
| 194 | Part # 12194 | Ring, A413/470/670 Kickdown Servo (Small) 1.000”OD (Metal) 1981-Up | 1 |
| 194 | Part # 12194A | Ring, A404/413 Kickdown Servo Piston (Small) 1.250”OD (Metal) 1978-80 | 1 |
| 195 | Part # 12195 | Ring, A904 Kickdown Servo Piston & Cover (Large 2.375”OD) (Metal) 1971-Up | 1 |
| 195 | Part # 12195A | Ring, A404/413/470/670 Kickdown Servo (Large) 2.125”OD (Metal) 1981-Up | 1 |
| 195 | Part # 12195B | Ring, A500 Kickdown Servo Piston & Cover (Large 2.560”OD) (Metal) 1989-Up | 1 |
| 300 | Part # 12300 | Gasket, A904/A500 Pan (14 Holes) 1960-Up | 1 |
| 300 | Part # 12300D | Gasket, A904 Pan (Small Pan)(14 Holes)(Colt/Arrow) | 1 |
| 305 | Part # 12305A | Gasket, A727 Extension Housing 1966-94 | 1 |
| 305 | Part # 12305AE | Gasket, A500 Extension Housing 1989 (Also Fits Under Overdrive Piston Retainer) | 1 |
| 305 | Part # 12305AF | Gasket, A500 Extension Housing 1990-Up | 1 |
| 305 | Part # 12305C | Gasket, A500 Overdrive Piston Retainer To Case 1990-Up (Can Use This Gasket & 12305AF Gasket For 1989 Models) | — |
| 305 | Part # 12305J | Gasket, A727/A518/A618/48RE Output Shaft Bearing Cover 1962-Up | 2 |
| 310 | Part # 12310C | Gasket, A904/A500 Front Pump (14 Hole) (Retro Fits Early) 1960-Up | 1 |
| 311 | Part # 12311 | O-Ring, A904/A500 Front Pump 1960-Up | 1 |
| 325 not on diagram | Part # 12325A | Gasket, A500 Lock-Up & Overdrive Solenoid 1988-97 | — |
| 325 not on diagram | Part # 12325B | Gasket, A500 Lock-up & Overdrive Solenoid 1998-Up | — |
| 325 not on diagram | Part # 12325C | Gasket, A500 Governor Pressure Solenoid 1988-Up | — |
| 326 | Part # 12326 | Gasket, A727/A518/A618/48RE Filter 1962-Up | — |
| 330 not on diagram | Part # 12330 | Lip Seal, A500 Overdrive Clutch Piston (Inner) | — |
| 331 | Part # 12331 | Lip Seal, A500 Overdrive Clutch Piston (Outer) | — |
| 334 | Part # 12334 | Lip Seal, A904/A500 Forward Clutch Piston (Inner) 1960-Up (1.955”OD) | 1 |
| 334 | Part # 12334A | Lip Seal, A904 Forward Clutch Piston (Inner) 1960-67 | 1 |
| 335 | Part # 12335 | Lip Seal, A904/A500 Forward Clutch piston (Outer) 1960-Up | 1 |
| 336 | Part # 12336 | Lip Seal, A904/A500 Direct Clutch Piston (Inner) 1972-Up (Short Lip) | 1 |
| 336 | Part # 12336A | Lip Seal, A904 Direct Clutch Piston (Inner) 1960-71 (Long Lip) | 1 |
| 336 | Part # 12336B | Lip Seal, A904/A500 Direct Clutch Piston (Inner) (VAMAC) 1972-Up (Short Lip) | — |
| 337 | Part # 12337 | Lip Seal, A413/470/670 Direct Piston (Outer) 1981-Up | 1 |
| 337 | Part # 12337A | Lip Seal, A904 Forward / Direct Clutch Piston (Outer) 1960-71 (Long Lip) | 1 |
| 337 | Part # 12337B | Lip Seal, A904/A500 Direct Clutch Piston (Outer) 1999-Up (This Seal Sets In The Drum and Rides On the OD Of The Piston) | — |
| 347 not on diagram | Part # 12347 | O-Ring, A500 Electric Connector (15/16” Connector) | — |
| 347 not on diagram | Part # 12347A | O-Ring, A500 Electric Connector (1 1/16” Connector) | — |
| 349 not on diagram | Part # 12349 | Seal, A404/413/470/670 Throttle Lever Shaft | 1 |
| 354 not on diagram | Part # 12354AK | D-Ring Set, A518/A618/48RE Accumulator (2 D-Rings) 1960-Up | — |
| 363 | Part # 12363A | Lip Seal, A904 Reverse Servo Piston Seal 1989-Up (2.580”OD) | 1 |
| 363 | Part # 12363AA | Lip Seal, A500 Reverse Servo 1989-Up A904 1965-2003 (2.580”OD) | — |
| 363 | Part # 12363D | Lip Seal, A904 Reverse Servo Piston Seal (Colt, Arrow) | 1 |
| 368 | Part # 12368 | O-Ring, A727/A518/A618/48RE Speed-O Housing (Red) 1966-Up | 1 |
| 368 | Part # 12368A | O-Ring, 400 Filter Pick-Up Tube 1964-Up | 1 |
| 369 not on diagram | Part # 12369 | Lip Seal, A904 Speed-O Shaft To Housing 1966-76 | — |
| 369 not on diagram | Part # 12369A | Lip Seal, A904 Speed-O Gear Cable (Plastic Housing) 1977-89 | — |
| 371 | Part # 12371 | Boot, A727/A518/A618/48RE Filler Tube 1997-Up | 1 |
| 371 | Part # 44371A | Gasket, 010/087/089/090 Filler Tube | 1 |
| 377 | Part # 12377 | O-Ring, A904 Neutral Switch 1960-65 | 1 |
| 377 | Part # 12377A | Gasket/Washer, A727/A518/A618/48RE Neutral Safety Switch | 1 |
| 487 not on diagram | Part # 22487A | Grommet, A727 Cross Shaft Link (AMC/JEEP) | — |
| 487 not on diagram | Part # 22487B | Grommet, A727 Cross Shaft Link (Chrysler) | 1 |
| 487 not on diagram | Part # 22487C | Grommet, A727 Manual Shaft | 1 |
| 634 | Part # 22634-6BK | Plug/O-Ring Kit, A500 (Fits 12634B) (Contains: 2 Plugs & O-Ring) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 034 | Part # 12034 | Bushing, 42RLE Pump Body (Babbit) 2003-Up | 2 |
| 034 | Part # 12034A | Bushing, A404/413/470/670 Pump Body (Bronze) | 1 |
| 037 | Part # 12037 | Bushing, A404/413/470 Stator 1978-85 | 2 |
| 037 | Part # 12037A | Bushing, A904/A500 Stator 1978-Up | 1 |
| 040 | Part # 12040 | Bushing, A500 Overdrive Sun Gear (Rear) No Flange (1.42”OD) (Also Same As The Front Bushing W/No Flange 88-99) | — |
| 040 | Part # 12040A | Bushing, A500 Overdrive Sun Gear (Front) W/Flange (1.42”OD) 1989-99 | — |
| 040 | Part # 12040B | Bushing, A500 Overdrive Sun Gear (Front) No Flange (1.50”OD) 1999-Up | — |
| 046 | Part # 12046 | Bushing, A904/A500 Direct Drum (Rear) 1968-E92 | 1 |
| 046 | Part # 12046B | Bushing, A904/A500 Direct Drum (Front) L1992-Up | 1 |
| 046 | Part # 12046C | Bushing, A904/A500 Direct Drum (Rear) L1992-Up | 1 |
| 050 | Part # 12050 | Bushing, A904/A500 Front Gear Hub 1976-Up | 1 |
| 052 | Part # 12052 | Bushing, A904/A500 Sun Gear | 1 |
| 062 | Part # 12062 | Bushing, A500 Output Shaft To Overdrive Sprag Race (2.144”ID) 1989-Up | 1 |
| 062 | Part # 12062B | Bushing, A500 Output Shaft To Intermediate Shaft (.605”ID) 1989-Up | 1 |
| 066 not on diagram | Part # 12066 | Bushing, A904 Extension Housing (1.560”ID)(1.380” Long) 1966-Up | 1 |
| 066 not on diagram | Part # 12066A | Bushing, A904 Extension Housing, 1960-65 (1.157”ID)(Bronze) | 1 |
| 066 not on diagram | Part # 36066 | Bushing , A727/A518/A618/48RE Extension Housing (1.690”ID)(Bronze)(Does Not Fit 48RE 03-Up) 1965-Up | 2 |
| 066 not on diagram | Part # 36066T | Bushing , A727/A518/A618 Extension Housing (1.690”ID)(Teflon Coated) 1965-Up | — |
| 211 | Part # 12211 | Washer, A904/A500 Direct Drum (Front & Rear) (Fiber) (.062”) 1971-Up | 1 |
| 211 | Part # 12211A | Washer, A904/A500 Direct Drum (Front & Rear) (Fiber) (.042”) 1960-70 | — |
| 213 | Part # 12213 | Race, A500 Overdrive Piston To Hub (.108”) | 1 |
| 213 | Part # 12213A | Race, A500 Overdrive Piston To Hub (.123”) | 1 |
| 213 | Part # 12213B | Race, A500 Overdrive Piston To Hub (.138”) | 1 |
| 213 | Part # 12213C | Race, A500 Overdrive Piston To Hub (.155”) | 1 |
| 213 | Part # 12213D | Race, A500 Overdrive Piston To Hub (.168”) | 1 |
| 213 | Part # 12213E | Race, A500 Overdrive Piston To Hub (.183”) | 1 |
| 213 | Part # 12213G | Race, A500 Overdrive Piston To Hub (.198”) | 1 |
| 213 | Part # 12213H | Race, A500 Overdrive Piston To Hub (.213”) | 1 |
| 213 | Part # 12213HA | Race, A500 Overdrive Piston To Hub (.228”) | 1 |
| 213 | Part # 12213J | Race, A500 Overdrive Piston To Hub (.243”) | 1 |
| 214 | Part # 12214 | Bearing, A500 Overdrive Piston To Hub | 1 |
| 215 not on diagram | Part # 12215 | Spacer, A500 Intermediate Shaft To Overdrive Planet (.158”) | 1 |
| 215 not on diagram | Part # 12215A | Spacer, A500 Intermediate Shaft To Overdrive Planet (.175”) | 1 |
| 215 not on diagram | Part # 12215B | Spacer, A500 Intermediate Shaft To Overdrive Planet (.193”) | 1 |
| 215 not on diagram | Part # 12215C | Spacer, A500 Intermediate Shaft To Overdrive Planet (.211”) | 1 |
| 219 | Part # 12219 | Race, A500 Overdrive Planet To Hub | 1 |
| 220 | Part # 12220 | Bearing & Race, A500 Overdrive Planet To Hub (Updated) | 1 |
| 221 not on diagram | Part # 12221 | Bearing, A500 Overdrive Planet To Hub (3.210”OD) (Use 12222 or 12220) | 1 |
| 221 not on diagram | Part # 12221A | Bearing, A500 Overdrive Planet To Hub (3.853”OD) (Can Use 12220) | — |
| 222 not on diagram | Part # 12222 | Bearing, A500 Overdrive Inner Sprag Race To Output Shaft (3.210”OD) | 1 |
| 232 | Part # 12232 | Race, A904/A500 Output Shaft Cup 1979-Up | 1 |
| 232 | Part # 12232A | Washer, A904 Output Shaft Plate Cup Race | 1 |
| 232 | Part # 12232D | Washer, 904/A500 Output Shaft .052” (3 Outer Tab) 1990-Up | 1 |
| 232 | Part # 12232DA | Washer, A727/A518/A618/48RE Output Shaft (3 Outer Tabs) (.068”) 1990-Up | 1 |
| 232 | Part # 12232DB | Washer, A727/A518/A618/48RE Output Shaft (3 Outer Tabs) (.083”) 1990-Up | 1 |
| 233 | Part # 12233A | Washer, A904 Output Shaft (.052”) (Fiber) 1960-75 | 1 |
| 233 | Part # 12233AA | Washer, A904 Output Shaft (.068”) (Fiber) 1960-75 | 1 |
| 233 | Part # 12233AB | Washer, A904 Output Shaft (.083”) (Fiber) 1960-76 | 1 |
| 233 | Part # 12233B | Washer, A904 Output Shaft (.052”) 1976-78 | 1 |
| 233 | Part # 12233BA | Washer, A904 Output Shaft (.068”) 1976-78 | 1 |
| 233 | Part # 12233BB | Washer, A904 Output Shaft (.083”) 1976-78 | 1 |
| 233 | Part # 12233C | Washer, A904/A500 Output Shaft (.052”) (2 Inner Tabs) 1979-Up | 1 |
| 233 | Part # 12233CA | Washer, A904/A500 Output Shaft (.068”) (2 Inner Tabs) 1979-Up | 1 |
| 233 | Part # 12233CB | Washer, A904/A500 Output Shaft (.083”) (2 Inner Tabs) 1979-Up | 1 |
| 233 | Part # 12233D | Race, A727/A518/A618/48RE Output Shaft 1990-Up(Used With 12232DA & DB)..........................................… | 1 |
| 234 | Part # 12234 | Washer, A904 Forward Drum To Hub (1 5/8”ID) 1960-72 | 1 |
| 234 | Part # 12234A | Washer, A904/A500 Forward Drum To Hub (1 Tab) 1973-Up | 1 |
| 236 | Part # 12236A | Race, A904/A500 Forward Drum Washer To Hub (2 Tab) | 1 |
| 238 | Part # 12238A | Washer, A904/A500 3 Gear Front & Rear Planet (Both Sides) (3 Outer Tangs) | 1 |
| 238 | Part # 12238B | Washer, A904 4 Gear Front & Rear Planet (4 Outer Tangs) (Tang OD is 2 3/4”) | 1 |
| 238 | Part # 12238C | Washer, A904/A500 4 Gear Large Front Planet (Both Sides) (4 Inner Tangs) | 1 |
| 238 | Part # 12238D | Washer, A904 4 Gear Front & Rear Planet (Aluminum Planet) 1 Side (4 Outer Tangs) (Tang OD Is 3 1/8”) | 1 |
| 243 | Part # 12243 | Race, A904/A500 Driving Shell (2.690”OD)(28 Teeth) | 1 |
| 243 | Part # 12243A | Race, A904/A500 Driving Shell (3.440”OD)(38 Teeth) | 1 |
| 244 | Part # 12244 | Spacer, A904/A500 Sungear Bowl (For Large Planet) | 1 |
| 254 | Part # 12254 | Washer, A904/A500 Rear Drum To Snap Ring (1 Tab) 1988-E92 | 1 |
| 271 | Part # 12271 | Ball Bearing, A500 Output Shaft (Front) (2.750”ID) (W/Snap Ring Groove) | 1 |
| 272 | Part # 12272 | Ball Bearing, A904 Output Shaft (Rear) (1.150”ID) (W/Snap Ring Groove) | 1 |
| 272 | Part # 12272A | Ball Bearing, A904 Output Shaft (Rear) (1.230”ID) (W/Snap Ring Groove) | — |
| 272 | Part # 22272E | Ball Bearing, A500 Output Shaft (Rear) (2.835”OD)(1.375”ID) Has No Snap Ring Groove | — |
| 660 | Part # 12660 | Inner Race, A500 Overdrive Sprag 1990-Up | 1 |
| 664 | Part # 12664 | Inner Race, A904/A500 Rear Sprag (24 Teeth) Slide On Type 1960-89 | 1 |
| 664 | Part # 12664A | Inner Race, A904/A500 Rear Sprag (Press On Type) (Sold W/Type #556) 1989-Up | — |
| 665 | Part # 12665 | Outer Race, A904 Rear Sprag (7 Rivet Holes) 1960-89 | 1 |
| 665 | Part # 12665A | Outer Race, A904/A500 Rear Sprag (12 Bolt Holes, Only 11 Holes Are Threaded) 1988-Up | 1 |
| 665 | Part # 12665B | Outer Race, A904 Rear Sprag (6 Threaded Holes) 1988-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 022 | Part # 12022A | Band, A904 Kickdown Rigid (1.750” Wide) (360 Engine) | 1 |
| 022 | Part # 12022AA | Band, A904 Kickdown Flex (1.375” Wide) 1977-91 | 1 |
| 022 | Part # 12022AAS | Band, A904 Kickdown Flex (1.375” Wide) (Snap) 1977-91 | — |
| 022 | Part # 12022AB | Band, A904 Kickdown Rigid (1.375” Wide) 1960-78 | 1 |
| 022 | Part # 12022AC | Band, A904/A500 Kickdown Flex (1.375” Wide) Kevlar Lining | 1 |
| 022 | Part # 12022AD | Band, A500 Kickdown Semi-Rigid (1.375” Wide) 1989-91 | 1 |
| 022 | Part # 12022B | Band, A904/A500 Kickdown Semi-Rigid (1.610” Wide) 1992-Up | 1 |
| 022 | Part # 12022BA | Band, A904/A500 Kickdown Flex (1.610” Wide) 1992-Up | — |
| 022 | Part # 12022BK | Band, A904/A500 Kickdown Semi-Rigid (1.610” Wide) 1992-Up (Raybestos Pro Series) | — |
| 024 | Part # 12024 | Band, A904 Reverse Rigid 1960 | 1 |
| 024 | Part # 12024A | Band, A904/A500 Reverse Double Wrap 1968-Up | 1 |
| 905 not on diagram | Part # 12905 | Servo Assembly, A904/A500 Front (1.240”OD) (6 Cylinder) | — |
| 905 not on diagram | Part # 12905A | Servo Assembly, A904/A500 Front (.990”OD) (V-8) | — |
| 910 not on diagram | Part # 12910 | Servo Assembly, A904/A500 Rear 1960-65 (.860”OD) | — |
| 916 | Part # 12916-2 | Strut, A904/A500 Front Band 1960-Up (2.750”Long) | 1 |
| 917 | Part # 12917 | Strut Assembly, A904 Rear Band (For Rigid Band) (W/Anchor & Strut) | — |
| 917 | Part # 12917A | Strut Assembly, A904/A500 Rear Band (For Double Wrap Band) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 500 not on diagram | Part # 12500 | Pump, A904 1960-67 | — |
| 500 not on diagram | Part # 12500A | Pump, A904 Non Lock-Up 1968-74 | — |
| 500 not on diagram | Part # 12500AA | Pump, A904 Non Lock-Up (1 Ring On Input Shaft) 1975-89 | — |
| 500 not on diagram | Part # 12500AB | Pump, A904 Non Lock-Up (2 Rings On Input Shaft) 1978-Up | — |
| 500 not on diagram | Part # 12500B | Pump, A904 Non Lock-Up (Colt Type) (1 Ring On Input Shaft) 1974-77 | — |
| 500 not on diagram | Part # 12500BA | Pump, A904/A500 Non Lock-Up (3 1/2” Shaft) (2 Ring On Input Shaft) 1978-Up | 1 |
| 500 not on diagram | Part # 12500C | Pump, A904/A500 Lock-Up (W/2 Lug Inner Gear) (1 Direct Drum Bushing) 1978-Up | — |
| 500 not on diagram | Part # 12500CA | Pump, A904/A500 Lock-Up (W/2 Flats Inner Gear) (1 Direct Drum Bushing) 1990-94 | — |
| 500 not on diagram | Part # 12500CC | Pump, A904/A500 Lock-Up (W/2 Flats Inner Gear) (2 Direct Drum Bushings) 1990-94 | — |
| 500 not on diagram | Part # 12500CE | Pump, A904/A500 Lock-Up (3 1/2” Colt Type) 1978-Up | — |
| 500 not on diagram | Part # 12500CG | Pump, A904/A500 Lock-Up (W/2 Flats Inner Gear) (2 Direct Drum Bushings) 1995-Up | 1 |
| 510 not on diagram | Part # 12510 | Pump Body W/Gears, A904 Non Lock-Up 1960-77 | — |
| 510 not on diagram | Part # 12510A | Pump Body W/Gears, A904/A500 Non Lock-Up & Lock-Up 1978-Up (W/2 Lugs On Inner Pump Gear) | 1 |
| 510 not on diagram | Part # 12510CA | Pump Body W/Gears, A904/A500 Lock-Up 1990-94 (W/2 Flats On Inner Pump Gear) | — |
| 510 not on diagram | Part # 12510CG | Pump Body W/Gears, A904/A500 Lock-Up (14 Hole Pump Gasket) 1995-Up (W/2 Flats On Inner Pump Gear) | 1 |
| 520 | Part # 12520 | Stator, A904 1960-67 | — |
| 520 | Part # 12520A | Stator, A904 Non Lock-Up (1 Ring On Input Shaft) 1968-77 | 1 |
| 520 | Part # 12520AA | Stator, A904 Non Lock-Up W/Bevel (1 Ring On Input Shaft) 1975-77 | — |
| 520 | Part # 12520AB | Stator, A904 Non Lock-Up (2 Rings On Input Shaft) 1978-Up | 1 |
| 520 | Part # 12520B | Stator, A904 Non Lock-Up (Colt Type) (1 Ring On Input Shaft) 1974-77… | — |
| 520 | Part # 12520BA | Stator, A904/A500 Non Lock-Up (904 Colt Type) (2 Ring On Input Shaft) 1978-Up (A500 D-50 1988-Up)… | — |
| 520 | Part # 12520C | Stator, A904/A500 Lock-Up (Fits Direct Drum W/1 Bushing) 1978-94 | 1 |
| 520 | Part # 12520CC | Stator, A904/A500 Lock-Up (Fits Direct Drum W/2 Bushings) (13 Hole Gasket) 1990-94 | — |
| 520 | Part # 12520CE | Stator, A904/A500 Lock-Up (904 Colt Type 1978-Up) (A500 D-50 1988-Up)… | — |
| 520 | Part # 12520CG | Stator, A904/500 Lock-Up (Fits Direct Drum W/2 Bushings) (14 Hole Gasket) 1995-Up | 1 |
| 530 | Part # 12530C | Pump Gears, A904/A500 (W/2 Flats On Inner Gears) 1990-Up | — |
| 530 | Part # A12530 | Pump Gears, A904 Lock-Up (.7460”-.7470”) 1960-77 (With 2 Lugs On Inner) | 1 |
| 530 | Part # A12530A | Pump Gears, A904/A500 (.7476”-.7486”) (W/2 Lugs On Inner Gear) 1978-Up | 1 |
| 530 | Part # A12530B | Pump Gears, A904/A500 (.7487”-.7497”) (W/2 Lugs On Inner Gear) 1978-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 100 | Part # 12100 | Friction, A500 Overdrive Clutch (.087”) (Flat) 1988-Up | 1 |
| 100 | Part # 12100A | Friction, A500 Overdrive Clutch (.087”) (Waved) 1990-Up Hi-Energy (Retro Fits Early) | 1 |
| 102 | Part # 12102 | Friction, A500 Overdrive Direct Clutch (.063”) 1988-Up | 1 |
| 106 | Part # 12106 | Friction, A904/A500 Direct Clutch (.086”) (Waffle) 1960-Up | 1 |
| 106 | Part # 12106A | Friction, A904/A500 Direct Clutch (.086”) (Hi-Energy) Kevlar 1960-Up | — |
| 106 | Part # 12106HP | Friction, A904/A500 Direct Clutch (.086”) (Hi-Performance) 1960-Up | — |
| 108 | Part # 12108 | Friction, A904/A500 Forward Clutch (Rear) (.061”) (Smooth) 1960-Up (1960 Is .068”) (Grooved 3 Times) | 1 |
| 108 | Part # 12108A | Friction, A904/A500 Forward Clutch (Rear) (.061”) (Hi-Energy) | — |
| 108 | Part # 12108HP | Friction, A904/A500 Forward Clutch (Rear) (061”) (Hi-Performance) 1960-Up | — |
| 119 not on diagram | Part # 12119C | Friction Module, A904 1960-Up | — |
| 119 not on diagram | Part # 12119CHP | Friction Module, TF6/A904 Blue Plate Special (Raybestos) 1960-Up | — |
| 119 not on diagram | Part # 12119E | Friction Module, A500 1988-Up | — |
| 120 | Part # 12120 | Steel, A500 Overdrive Clutch (.068”) 1988-Up | 1 |
| 122 | Part # 12122 | Steel, A518/A618/48RE Overdrive Direct Clutch (.069”) 1988-Up | 1 |
| 122 | Part # 12122A | Steel, A500 Overdrive Direct clutch (.054”) 1996-Up | — |
| 126 | Part # 12126 | Steel, A904/A500 Forward / Direct Clutch (.068”) 1960-Up | 1 |
| 126 | Part # 12126A | Steel, A904/A500 Forward / Direct Clutch (.068”) 1960-Up (Kolene) | — |
| 126 | Part # 12126D | Steel, A904/A500 Direct Clutch (.068”) (W/2 V-Notched Teeth) 1999-Up | — |
| 126 | Part # 12126DA | Steel, A904/A500 Direct Clutch (.085”) (W/2 V-Notched Teeth) 1999-Up | — |
| 126 | Part # 12126X | Steel, A904/A500 Forward / Direct Clutch (.088”) (Oversized) 1960-Up | — |
| 139 not on diagram | Part # 12139 | Steel Module, A904 | — |
| 139 not on diagram | Part # 12139E | Steel Module, A500 | — |
| 140 | Part # 12140 | Pressure Plate, A500 Overdrive Clutch (.373”)(Front)(Flat) 1988-92 (For 1993-Up Use 12141) | 1 |
| 141 | Part # 12141 | Pressure Plate, A500 Overdrive Clutch (.216”)(Rear)(Flat) 1988-99 (Also Fits Overdrive Clutch (Front) (#140) 1993-99) | 1 |
| 142 | Part # 12142 | Pressure Plate, A500 Overdrive Direct Clutch (Front) (.212” Thick On Edge)(Stepped) | 1 |
| 142 | Part # 12142A | Pressure Plate, A500 Overdrive Direct Clutch (Front) (.085” Thick On Edge)(Stepped) | — |
| 143 | Part # 12143 | Pressure Plate, A500 Overdrive Direct Clutch (Rear) (.215”) | 1 |
| 146 | Part # 12146 | Pressure Plate, A904/A500 Forward / Direct Clutch (Flat) (.217”Thick) 1960-Up | 1 |
| 146 | Part # 12146D | Pressure Plate, A904/A500 Direct (.216”) (W/2 Missing Teeth) 1999-Up | — |
| 149 | Part # 12149 | Pressure Plate, A604/A500 Forward Clutch (Beveled) 1960-Up | 1 |
| 741 not on diagram | Part # 12741CA-4 | Plate, A500 TCC Boost Valve (Superior) With Retainer To Hold Spring In | — |
| 907 | Part # 12907 | Piston, A904 Front Servo 1960-66 (1.240”OD) | 1 |
| 912 | Part # 12912 | Piston, A904/A500 Rear Servo (2.546”OD) 1966-Up | 1 |
| 927 | Part # 12927 | Piston, A404/413/470/670 Accumulator (Aluminum) | 1 |
| 927 | Part # 12927HD | Piston, A404/A413/A470/A670 Accumulator (Aluminum With 4 Rings) | — |
| 927 | Part # 22927 | Piston, A404/413/470/670 Accumulator (Plastic) | — |
| 960 | Part # 12960 | Piston, A500 Overdrive Direct Clutch 1960-Up | 2 |
| 964 | Part # 12964 | Piston, A904/A500 Forward Clutch 1960-Up | 1 |
| 965 | Part # 12965 | Piston, A904/A500 Direct (Uses The Outer O-Ring Only) 1960-97 | 1 |
| 965 | Part # 12965D | Piston, A904/A500 Direct (Has No O-Rings On Piston) 1998-Up | — |
| 970 | Part # 12970 | Spring, A500 Overdrive Clutch Return | 1 |
| 974 | Part # 12974A | Spring, A404/413/470/670 Forward Clutch Return (4.970”OD) | 1 |
| 975 | Part # 12975 | Spring, A904/A500 Direct Clutch Return 1960-Up | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 551 | Part # 12551A | Drum, A500 Overdrive (6 Clutch) | 1 |
| 554 | Part # 12554 | Drum, A904 Forward (W/Out Input Shaft) (3 Clutch) 1968-77 (1 1/8” Tall Direct Clutch Hub) | — |
| 554 | Part # 12554AAK | Drum, A904 Forward (W/1 Ring, 27 Spline Input Shaft) (3 Clutch) 1968-77 (1 1/4” Tall Direct Clutch Hub)… | — |
| 554 | Part # 12554AK | Drum, A904 Forward (W/1 Ring, 27 Spline Input Shaft) (4 Clutch) 1968-74 (1 1/8” Tall Direct Clutch Hub)… | — |
| 554 | Part # 12554BK | Drum, A904 Forward (W/2 Ring, 27 Spline Input Shaft) (4 Clutch) 1975-77 | — |
| 554 | Part # 12554C | Drum, A904 Forward (W/Out Input Shaft) (4 Clutch) (W/1 Ring On Drum) | — |
| 554 | Part # 12554CA | Drum, A904/A500 Forward (W/Out Input Shaft) (4 Clutch) 1990-Up (W/1 Ring On Drum) Takes A 3 Tab Washer # 232 | — |
| 554 | Part # 12554CAK | Drum, A904/A500 Forward (W/2 Ring, 27 Spline Input Shaft) (4 Clutch) 1990-Up (Non Lock-Up) W/1 Ring On Drum… | — |
| 554 | Part # 12554CK | Drum, A904/A500 Forward (W/2 Ring, 27 Spline Input Shaft) (4 Clutch) 1978-89 (Non Lock-Up) W/1 Ring On Drum | — |
| 554 | Part # 12554DK | Drum, A904/A500 Forward (W/2 Ring, 26 Spline Input Shaft) (4 Clutch) 1978-89 (Lock-Up) W/1 Ring On Drum Can Use A… | — |
| 554 | Part # 12554EK | Drum, A904/A500 Forward (W/2 Ring, 26 Spline Input Shaft) (4 Clutch) 1990-Up (Lock-Up) W/1 Ring On Drum… | — |
| 554 | Part # 12554FK | Drum, A904 (Colt, Arrow) Forward (W/1 Ring, 27 Spline Input Shaft) (3 Clutch) 1974-77 (Non Lock-Up) W/1 Ring On Drum | — |
| 554 | Part # 12554GK | Drum, A904 (Colt, Arrow) Forward (W/2 Ring, 27 Spline Input Shaft) (3 Clutch) 1978-Up (Non Lock-Up) W/1 Ring On Drum | — |
| 554 | Part # 12554HAK | Drum, A904 (Colt, Arrow) Forward (W/2 Ring, 23 Spline Input Shaft) (3 Clutch) (Lock-Up) 1978-Up W/1 Ring On Drum | — |
| 554 | Part # 12554HK | Drum, A904 (Colt, Arrow) Forward (W/2 Ring, 23 Spline Input Shaft) (4 Clutch) (Non Lock-Up) 1978-Up W/1 Ring On Drum | — |
| 554 | Part # 12554JK | Drum, A904/A500 Forward (W/2 Ring, 22 Spline Input Shaft) (3 Clutch) (Lock-Up) 1990-Up W/1 Ring On Drum | — |
| 554 | Part # 12554K | Drum, A904 Forward (W/1 Ring, 27 Spline Input Shaft) (3 Clutch) 1968-77 (1 1/8” Tall Direct Clutch Hub) With 1 Ring On… | — |
| 555 | Part # 12555 | Drum, A904/A500 Direct (4 Clutch) 1 Bushing (6”OD At Lugs) 1971-89 | 1 |
| 555 | Part # 12555A | Drum, A904/A500 Direct (5 Clutch) 1 Bushing (6”OD At Lugs) 1971-89 | 1 |
| 555 | Part # 12555AA | Drum, A904/A500 Direct (5 Clutch) 1 Bushing (6 1/4”OD At Lugs) 1990-Up | — |
| 555 | Part # 12555AB | Drum, A904/A500 Direct (4 Clutch) 1 Bushing (6 1/4”OD At Lugs) 1990-Up | — |
| 555 | Part # 12555B | Drum, A904/A500 Direct (5 Clutch) 2 Bushing (Outer O-Ring #337 Goes On The Piston) 1992-Up (Can Use 12555CAK) | — |
| 555 | Part # 12555C | Drum, A904/A500 Direct (4 Clutch) 2 Bushing (Outer O-Ring #337 Goes On The Piston) 1992-Up | 1 |
| 555 | Part # 12555D | Drum, A904/A500 Direct (4 Clutch) 2 Bushing (Outer O-Ring #337 Goes Inside Of The Drum) 1999-Up… | — |
| 555 | Part # 12555DA | Drum, A904/A500 Direct (5 Clutch) 2 Bushing (Outer O-Ring #337 Goes Inside Of The Drum) 1999-Up… | — |
| 556 | Part # 12556 | Drum, A904/A500 Reverse (Takes A Slide On Inner Race) 1974-87 | 1 |
| 556 | Part # 12556A | Drum, A904/A500 Reverse (W/Pressed On Inner Race) 1988-95 | 1 |
| 556 | Part # 12556B | Drum, A904/A500 Reverse (W/Pressed On Inner Race) 1990-Up (Drum Is Undercut In Front For Washer #254) | — |
| 570 | Part # 12570 | Clutch Hub, A500 Overdrive Clutch (3” Tall) | 1 |
| 570 | Part # 12570A | Clutch Hub, A500 overdrive Clutch (2 3/4” Tall) | — |
| 580 | Part # 12580A | Planet, A500 Overdrive (4 Gear) Uses A Sun Gear With No I.D. Groove (Can Use 12580C) | 1 |
| 580 | Part # 12580AA | Planet, A500 Overdrive (4 Gear) Straight Teeth | — |
| 580 | Part # 12580AB | Planet, A518 Overdrive (4 Gear) (W/15 Degree Teeth) 1995-Up (Uses A Sun Gear W/1 I.D. Groove) Can Use 12580BB | 1 |
| 580 | Part # 12580B | Planet, A500 Overdrive (5 Gear) (W/22 Degree Teeth) 1989-94 (Uses A Sungear With No I.D. Groove) Can Use 12580C | — |
| 580 | Part # 12580BB | Planet, A500 Overdrive (5 Gear) (W/15 Degree Teeth) 1995-Up (Uses A Sun Gear W/1 I.D. Groove) | — |
| 580 | Part # 12580C | Planet, A500 Overdrive (6 Gear) (W/22 Degree Teeth) 1989-94 (Uses A Sun Gear With No I.D. Groove) | — |
| 580 | Part # 12580CA | Planet, A500 Overdrive (6 Gear) (W/15 Degree Teeth) 1995-Up | 1 |
| 582 | Part # 12582 | Planet, A904 Front (4 Gear) Aluminum 1968-Up | — |
| 582 | Part # 12582A | Planet, A904/A500 Front (4 Gear) Steel (Small) 1975-Up (Uses A 4 3/8”OD Ring Gear) | — |
| 582 | Part # 12582B | Planet, A904/A500 Front (4 Gear) Steel (Large) Uses A 5”OD Ring Gear | 1 |
| 582 | Part # 12582C | Planet, A904/A500 Front (3 Gear) Steel 1980-Up | — |
| 582 | Part # 12582CA | Planet, A904 Front (3 Gear) Aluminum 1960-67 | — |
| 584 | Part # 12584 | Planet, A904/A500 Rear (3 Gear) Steel 1960-Up | — |
| 584 | Part # 12584A | Planet, A904/A500 Rear (4 Gear) Aluminum 1968-Up | — |
| 584 | Part # 12584B | Planet, A904/A500 Rear (4 Gear) Steel 1974-Up | 1 |
| 584 | Part # 12584CA | Planet, A904 Rear (3 Gear) Aluminum 1960-Up | — |
| 590 | Part # 12590A | Ring Gear, A500 Overdrive Planet (Angled Teeth) 1989-94 (Has No I.D. Groove Between Park Lugs & Drum Lugs) | 1 |
| 590 | Part # 12590AA | Ring Gear, A500 Overdrive Planet (Straight Teeth) | 1 |
| 590 | Part # 12590AB | Ring Gear, A500 Overdrive (W/15 Degree Angled Teeth) Has 1 I.D. Groove Between Park Lugs & Drum Lugs | 1 |
| 592 | Part # 12592 | Ring Gear W/Hub, A904/A500 Front (4 3/8”OD) 1968-Up (For Small Planet) | — |
| 592 | Part # 12592A | Ring Gear W/Hub, A904/A500 Front (5”OD) For Large Planet (Uses A 1 Tab Washer #234) With No 2 Tab Race Under Washer | — |
| 592 | Part # 12592B | Ring Gear W/Hub, A904/A500 Front (5”OD) For Large Planet (Uses a 2 Tab Race #236 Under Washer #234) | — |
| 594 | Part # 12594 | Ring Gear W/Hub, A904/A500 Rear 1960-Up | — |
| 610 | Part # 12610A | Sun Gear, A500 Overdrive (22 Degree Angled Teeth) 1989-94 | 1 |
| 610 | Part # 12610AA | Sun Gear, A500 Overdrive (Straight Teeth) | 1 |
| 610 | Part # 12610AB | Sun Gear, A500 Overdrive (15 Degree Angled Teeth) 1995-Up | 1 |
| 612 | Part # 12612 | Sun Gear, A904/A500 Forward & Rear Planet (28 Teeth / 28 Teeth) | — |
| 612 | Part # 12612B | Sun Gear, A904/A500 Forward & Rear Planet (38 Teeth / 28 Teeth) | 1 |
| 622 | Part # 12622 | Shell, A904/A500 (For Small Planet) 6 1/8”OD At Lugs 1960-Up | — |
| 622 | Part # 12622A | Shell, A904/A500 (For Large Planet) 6 1/8”OD At Lugs 1978-92 | — |
| 622 | Part # 12622B | Shell, A904/A500 (For Large Planet) 6 3/8”OD At Lugs 1992-Up | 1 |
| 634 | Part # 12634 | Support, A904 Output Shaft (4 Bolt) 1966-89/1960-65 (Has Rear Pump) | 1 |
| 634 | Part # 12634A | Support, A904 Output Shaft (6 Bolt) 1988-Up | 1 |
| 634 | Part # 12634B | Support, A500 Piston Retainer (W/Governor Feed Tubes) 1988-95 (Comes W/2 Plugs) For 12634C Also | 1 |
| 634 | Part # 12634C | Support, A500 Piston Retainer (Has No Feed Tube) 1994-Up | 1 |
| 634 | Part # S12634B-OS | Support, A500 Piston Retainer (Oversize) 1988-Up (Sonnax) Reverse Drum Must Be Bored… | — |
| 650 | Part # 12650 | Sprag, A500 Overrun Clutch (Overdrive) 1990-Up | 1 |
| 654 | Part # 12654 | Sprag, A904 Rear (10 Spring & Roller) 1964-88 | — |
| 654 | Part # 54654A | Sprag, 200/200C/200-4R Low Clutch (Narrow, Early) | 1 |
| 670 | Part # 12670 | Input Shaft, A904 (1 Ring) (27 Spline) | — |
| 670 | Part # 12670B | Input Shaft, A904/A500 (2 Ring) (27 Spline) Non Lock-Up | — |
| 670 | Part # 12670D | Input Shaft, A904/A500 (2 Ring) (26 Spline) Lock-Up | 1 |
| 670 | Part # 12670F | Input Shaft, A904 (Colt, Arrow) (1 Ring) (27 Spline) | — |
| 670 | Part # 12670G | Input Shaft, A904 (Colt, Arrow) (2 Ring) (27 Spline) Non Lock-Up | — |
| 670 | Part # 12670H | Input Shaft, A904 (Colt, Arrow) (1 Ring) (23 Spline) Non Lock-Up | — |
| 670 | Part # 12670HA | Input Shaft, A904 (Colt, Arrow) (2 Ring) (23 Spline) Lock-Up | — |
| 670 | Part # 12670J | Input Shaft, A904/A500 (2 ring) (22 Spline) Lock-Up 1990-Up | — |
| 674 | Part # 12674 | Intermediate Shaft, A500 (Uses Washer #233 W/2 Inner Tabs) 1988-89 | 1 |
| 674 | Part # 12674A | Intermediate Shaft, A500 (Uses Washer #233 W/3 Outer Tabs) 1990-Up | 1 |
| 678 | Part # 12678 | Output Shaft, A904 (21 1/2” Long) (2WD) 1966-77 | — |
| 678 | Part # 12678A | Output Shaft, A904 (21 1/2” Long) (2WD) 1978-89 | — |
| 678 | Part # 12678B | Output Shaft, A904 (21 1/2” Long) (2WD) 1990-Up | — |
| 678 | Part # 12678C | Output Shaft, A904 (12 1/4” Long) (4x4 Eagle Type) | — |
| 678 | Part # 12678D | Output Shaft, A904 (14 3/4” Long) (4x4 Dakota Type) | — |
| 678 | Part # 12678E | Output Shaft, A500 2WD (1 1/16” Long Key Way Slot) | — |
| 678 | Part # 12678EA | Output Shaft, A500 2WD (1 7/16” Long Key Way Slot) | — |
| 678 | Part # 12678EB | Output Shaft, A500 2WD (13 Teeth Speed-O Gear) No Key Way | — |
| 678 | Part # 12678EC | Output Shaft, A500 2WD (No Speed-O Gear) No Key Way | — |
| 678 | Part # 12678F | Output Shaft, A500 4x4 (9 1/4” Long) (1 1/16” Long Key Way Slot) | — |
| 678 | Part # 12678FA | Output Sahft, A500 4x4 (9 1/4” Long) (1 7/16” Long Key Way Slot) | — |
| 678 | Part # 12678G | Output Shaft, A500 4x4 (5 1/4” Long) (1 1/8” Long Slpines) (W/Pilot On Rear Of Shaft) | — |
| 678 | Part # 12678GA | Output Shaft, A500 4x4 (5 1/4” Long) (1 7/8” Long Splines) | — |
| 685 | Part # 12685 | Support, A500 Governor (3 Ring) | 1 |
| 685 | Part # 12685A | Support, A500 Governor (2 Ring) | — |
| 685 | Part # 12685B | Support, A904 Governor (2 Ring) | — |
| 741 not on diagram | Part # S12741-7 | Neutral Safety Back-Up Insulator, A727/A518 (This Replaces The Plastic Piece On The Manual Shaft Lever (Rooster Comb)… | — |
| 760 | Part # 12760 | Case, A904 318/360 Non Lock-Up 1972-86 | — |
| 760 | Part # 12760A | Case, A904 318/360 Lock-Up 1978-86 | — |
| 760 | Part # 12760B | Case, A904 318/360 Lock-Up (4 Bolt Support) 1 Wire Rear Case Connector W/ 1/4” Pipe Thread L1987-Up | — |
| 760 | Part # 12760BA | Case, A904 318/360 Lock-Up (6 Bolt Support) 1 Wire Rear Case Connector W/ 1/4” Pipe Thread L1987-Up… | — |
| 760 | Part # 12760BB | Case, A904 318/360 Lock-Up (6 Bolt Support) 1 Wire Rear Case Connector W/ 1/4” Pipe Thread L1987-Up (With Timming Hole) | — |
| 760 | Part # 12760BC | Case, A904 318/360 Lock-Up (6 Bolt Support) 2 Wire Rear Case Connector W/ 3/8” Pipe Thread L1987-Up (With Timming Hole) | — |
| 760 | Part # 12760BD | Case, A904 225 6 Cylinder Non Lock-Up (4 Bolt Support) 1972-86 | — |
| 760 | Part # 12760BE | Case, A904 225 6 Cylinder Lock-Up (4 Bolt Support) 1978-86 | — |
| 760 | Part # 12760CA | Case, A904 225 6 Cylinder Lock-Up (6 Bolt Support) 1 Wire Rear Case Connector W/ 1/4 Pipe Thread L1987-Up | — |
| 760 | Part # 12760E | Case, A904 AMC Non Lock-Up 1974-86 | — |
| 760 | Part # 12760F | Case, A904 AMC Lock-Up (4 Bolt Rear Support) 1978-86 | — |
| 760 | Part # 12760FA | Case, A904 AMC Lock-Up (6 Bolt Rear Support) 1987-Up (No Rear Electric Connector) | — |
| 760 | Part # 12760FB | Case, A904 AMC Lock-Up (6 Bolt Rear Support) 1987-Up (1 Wire Rear Case Connector W/ 1/4” Pipe Thread) | — |
| 760 | Part # 12760G | Case, A904 3.9L Lock-Up (Dakota W/Extra Boss On Bell) 1988-Up | — |
| 760 | Part # 12760H | Case, A904 Non Lock-Up (With V-8 Chevrolet Bell) 1972-79 | — |
| 760 | Part # 12760J | Case, A904 2.8L V-6 lock-Up (No Rear Electric Connector) W/Square Timming Hole | — |
| 760 | Part # 12760JA | Case, A904 2.8L V-6 Lock-Up (1 Wire Case Connector W/ 1/4” Pipe Thread) (4 Bolt Support) W/Square Timming Hole | — |
| 760 | Part # 12760JB | Case, A904 2.8L V-6 Lock-Up (1 Wire Case Connector W/ 1/4” Pipe Thread) | — |
| 760 | Part # 12760JC | Case, A904 2.8L V-6 Lock-Up (2 Wire Case Connector W/ 3/8” Pipe Thread) | — |
| 760 | Part # 12760K | Case, A904 2.8L V-6 lock-Up (No Rear Electric Connector) W/Out Square Timming Hole | — |
| 760 | Part # 12760L | Case, A500 318/360 3.9L (.900”OD Case Connector) (7 3/4” Top Bolts) 16 Holes Bell To Engine (Round & Square) Driver… | — |
| 760 | Part # 12760LA | Case, A500 (Some 3.9L) (.900”OD Case Connector) (7 3/4” Top Bolts) 17 Holes Bell To Engine (Round & Square) Driver Side… | — |
| 760 | Part # 12760LB | Case, A500 318/360 3.9L (.900”OD Case Connector) (7 3/4” Top Bolts) 16 Holes Bell To Engine (Round & Square) Drivers… | — |
| 760 | Part # 12760LD | Case, A500 318/360 3.9L (1.080”OD Case Connector) (7 3/4” Top Bolts) 16 Holes Bell To Engine (Round & Square) Driver… | — |
| 760 | Part # 12760M | Case, A500 318/360 3.9L (1.080”OD Case Connector) (7 3/4” Top Bolts) 17 Holes Bell To Engine (Round & Square) Driver… | — |
| 760 | Part # 12760MA | Case, A500 318/360 3.9L (1.080”OD Case Connector) (7 3/4” Top Bolts) 17 Holes Bell To Engine (Round & Square) Driver… | — |
| 760 | Part # 12760MB | Case, A500 318/360 3.9L (1.080”OD Case Connector) (7 3/4” Top Bolts) 17 Holes Bell To Engine (Round & Square) Drivers… | — |
| 760 | Part # 12760N | Case, A500 318/360 3.9L (1.080”OD Case Connector) (7 3/4” Top Bolts) 16 Holes Bell To Engine (Round & Square) Passenger… | — |
| 760 | Part # 12760NA | Case, A500 318/360 3.9L (1.080”OD Case Connector) (7 3/4” Top Bolts) 16 Holes Bell To Engine (Round & Square) Passenger… | — |
| 760 | Part # 12760P | Case, A500 (1.080”OD Case Connector) (5 7/8” Top Bolts) Passenger Side Starter… | — |
| 760 | Part # 12760PA | Case, A500 (1.080”OD Case Connector) (5 7/8” Top Bolts) Passenger Side Starter… | — |
| 760 | Part # 12760S | Case, A500 (.900”OD Case Connector) (5 1/8” Top Bolts) | — |
| 760 | Part # 12760Z | Case, A904 225 6 Cylinder (Push Button) 1960-65 | — |
| 760 | Part # 12760ZA | Case, A904 273/318 (Push Button) 1960-65 | — |
| 770 | Part # 12770 | Extension Housing, A904 (14 3/4”) 1966-Up | — |
| 770 | Part # 12770A | Extension Housing, A904 4x4 Eagle 1979-Up (Snap Ring Cover On Bottom) | — |
| 770 | Part # 12770AA | Extension Housing, A904 2WD (14 3/4”) Long Snap Ring Cover On Passenger Side | — |
| 770 | Part # 12770B | Extension Housing, A500 2WD (Speed-O Gear Type) | — |
| 770 | Part # 12770BK | Overdrive Assembly, A500 2WD Governor Type (W/Speed-O) No Sensor (4 Gear Planet) | — |
| 770 | Part # 12770C | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (Uses A Rear Seal) (Uses A 2 Bolt Mount)… | — |
| 770 | Part # 12770CA | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (No Rear Seal) (With .637” Wide Park Pawl) | — |
| 770 | Part # 12770CB | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (Uses A Rear Seal) (Uses A 3 Bolt Mount)… | — |
| 770 | Part # 12770CBK | Overdrive Assembly, A500 4x4 (15 7/8” Long) Governor Type (No Speed-O) No Sensor (Uses A Rear Seal)… | — |
| 770 | Part # 12770CC | Extension Housing, A500 4x4 (15 7/8” Long) (No Speed-O) No Sensor (Uses A Rear Seal) (Uses A 5 Bolt Mount)… | — |
| 770 | Part # 12770CCK | Overdrive Assembly, A500 4x4 (15 7/8” Long) Governor Type (No Speed-O) No Sensor (Uses A Rear Seal)… | — |
| 770 | Part # 12770CK | Overdrive Assembly, A500 4x4 (15 7/8” Long) Governor Type (No Speed-O) No Sensor (Uses A Rear Seal)… | — |
| 770 | Part # 12770D | Extension Housing, A500 2WD (No Governor) (With Speed-O) W/Sensor | — |
| 770 | Part # 12770DA | Extension Housing, A500 2WD (No Governor) (No Speed-O) W/Sensor | — |
| 770 | Part # 12770DAK | Overdrive Assembly, A500 2WD (No Governor) (No Speed-O) W/Sensor (4 Gear Planet) | — |
| 770 | Part # 12770DK | Overdrive Assembly, A500 2WD (No Governor) (W/Speed-O) W/Sensor (4 Gear Planet) | — |
| 770 | Part # 12770E | Extension Housing, A500 4x4 (10 7/8” Long) (No Speed-O) W/Sensor (Can Use 12770EB) | — |
| 770 | Part # 12770EAK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (No Speed-O) W/Sensor (W/ 1/2” Pilot On End Of Shaft) W/Side… | — |
| 770 | Part # 12770EB | Extension Housing, A500 4x4 (10 7/8” Long) No Governor (W/Speed Sensor) (Holds 4 or 6 Overdrive Clutch) W/2 Mounting… | — |
| 770 | Part # 12770EBK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (Holds 4 or 6 Overdrive Clutch) (W/Speed Sensor) W/2 Mounting… | — |
| 770 | Part # 12770EC | Extension Housing, A500 4x4 (10 7/8” Long) No Governor (Holds 4 or 6 Overdrive Clutch) (W/Speed Sensor) W/3 Mounting… | — |
| 770 | Part # 12770ECK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (Holds 4 or 6 Overdrive Clutch) (W/Speed Sensor) W/3 Mounting… | — |
| 770 | Part # 12770EK | Overdrive Assembly, A500 4x4 (10 7/8” Long) No Governor (No Speed-O) W/Sensor (Output Shaft Splined To End… | — |
| 770 | Part # 12770Z | Extension Housing, A904 2WD (Push Button) 1960-65 | — |
| 771 | Part # 12771 | Cover, A727/A518/A618/48RE Output Shaft Snap Ring (With Bolts) 1962-Up | — |
| 774 not on diagram | Part # 12774 | Speed-O Housing, A727/A518/A618/48RE (Aluminum) (Cable Type) 1965-Up | — |
| 774 not on diagram | Part # 12774B | Speed-O Housing, A727/A518/A618/48RE (Plastic) With 3 Round Prong Connectors | — |
| 774 not on diagram | Part # 12774BA | Speed-O Housing, A727/A518/A618/48RE (Plastic) With 3 Flat Blade Connectors | — |
| 848 | Part # 12848 | Gear, A727/A518/A618/48RE Driven Speed-O (24 Teeth) With 3” Long Steel Shaft 1966-94 | — |
| 848 | Part # 12848C | Gear, A727/A518/A618/48RE Driven Speed-O (26 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848D | Gear, A727/A518/A618/48RE Driven Speed-O (27 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848F | Gear, A727/A518/A618/48RE Driven Speed-O (29 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848FA | Gear, A727/A518/A618/48RE Driven Speed-O (29 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848G | Gear, A727/A518/A618/48RE Driven Speed-O (30 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848H | Gear, A727/A518/A618/48RE Driven Speed-O (31 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848HA | Gear, A727/A518/A618/48RE Driven Speed-O (31 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848J | Gear, A727/A518/A618/48RE Driven Speed-O (32 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848JA | Gear, A727/A518/A618/48RE Driven Speed-O (32 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848K | Gear, A727/A518/A618/48RE Driven Speed-O (33 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848KA | Gear, A727/A518/A618/48RE Driven Speed-O (33 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848L | Gear, A727/A518/A618/48RE Driven Speed-O (34 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848LA | Gear, A727/A518/A618/48RE Driven Speed-O (34 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848M | Gear, A727/A518/A618/48RE Driven Speed-O (35 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848MA | Gear, A727/A518/A618/48RE Driven Speed-O (35 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848N | Gear, A727/A518/A618/48RE Driven Speed-O (36 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848NA | Gear, A727/A518/A618/48RE Driven Speed-O (36 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848P | Gear, A727/A518/A618/48RE Driven Speed-O (37 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848Q | Gear, A727/A518/A618/48RE Driven Speed-O (38 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848QA | Gear, A727/A518/A618/48RE Driven Speed-O (38 Teeth) With 1 1/2” Long Steel Shaft | — |
| 848 | Part # 12848S | Gear, A727/A518/A618/48RE Driven Speed-O (40 Teeth) With 3” Long Steel Shaft | — |
| 848 | Part # 12848ZJ | Gear, A727/A518/A618/48RE Driven Speed-O (56 Teeth) With 3 “ Long Steel Shaft | — |
| 848 | Part # 12848ZK | Gear, A727/A518/A618/48RE Driven Speed-O (57 Teeth) With 3” Long Steel Shaft | — |
| 995 | Part # 12995A | Park Pawl Assembly, A500 | — |
| 996 | Part # 12996C-1 | Adapter, A727/A518 (For The S12996CK Kit) | — |
| Position | Part # | Name | Cross numbers |
|---|---|---|---|
| 447 not on diagram | Part # 12447 | Recalibrator, Chrysler Electronic Speedometers | — |
| 447 not on diagram | Part # 12447A | Inverter, A500 Overdrive | — |
| 483 not on diagram | Part # 12483P | Park Reaction Plug, A727 | — |
| 487 not on diagram | Part # 12487D | Hitch Pins, Chrysler | — |
| 487 not on diagram | Part # S22487 | E-Clip, A404/413/470/670 Shift Linkage | — |
| 678 | Part # 12678P | Pin, A904/A500 Pilot (Presses Into End Of Output Shaft) 1978-89 | 1 |
| 688 not on diagram | Part # 12688 | Bracket, A727/A518/A500/A904 Governor Bolt 1962-Up | — |
| 697 | Part # 12697 | Retainer, A500 Governor Support | 1 |
| 741 not on diagram | Part # S12741-4 | Bracket, A500 Holds Transducer (#415 Sensor) To Valve Body (4th Design)(Metal, 3 Bolt Holes) 2000-Up | — |
| 741 not on diagram | Part # S12741C-4 | Retainers, A500 TCC Boost Valve Spring (Sonnax) (5 Pieces) | — |
| 761 not on diagram | Part # 22761-2C | Sleeve, A727/A500 Shift Linkage Shaft (Use With T-56361-TL) | — |
| 761 not on diagram | Part # 22761MB | Bracket, A500 (Holds Push-In Neutral Safety Switch To Case) Screws Into Case W/2 Hole Bracket & Washers… | — |
| 761 not on diagram | Part # 22761S | Sleeve, A500 (Presses Into Case Connector Hole On Late Model Cases With .900”OD Hole) | — |
| 775 not on diagram | Part # 22775 | Bolt, 948TE/ZF9HP48 Converter (5/16 X 24X 1/2”Hex) | — |
| 839 not on diagram | Part # 44839 | Magnet, 250/250C/350/350C Pan (Rectangular) 1969-86 | — |
| 839 not on diagram | Part # 44839A | Magnet, 250/250C/350/350C Pan (Round) 1969-86 | 1 |
| 842 | Part # 12842 | Bracket, A727 Speed-O Hold Down 1966-Up | — |
| 844 | Part # 12844 | Key, A500 Holds Governor Support To Shaft (Half Moon) | — |
| 844 | Part # 12844A | Key, A500 Holds Governor Support To Shaft (Rectangle) | — |
| 860 | Part # 12860 | Snap Ring, A500 Overdrive Clutch (.051” Thick)(6 3/8”OD)(Waved) 1988-Up | 1 |
| 861 | Part # 12861 | Snap Ring, A500 Overdrive Clutch Front | 1 |
| 862 | Part # 12862 | Snap Ring, A500 Overdrive Clutch (Flat) | 1 |
| 863 | Part # 12863 | Snap Ring, A500 Overdrive Direct Drum To Ring Gear | 1 |
| 864 | Part # 12864 | Snap Ring, A500 Overdrive Direct Clutch (Front) (.079” Thick)(5 13/16”OD) 1988-Up | 1 |
| 866 | Part # 12866 | Snap Ring, A500 Overdrive Sun Gear (Round) | 1 |
| 867 | Part # 12867 | Snap Ring, A500 Overdrive Sun Gear (Flat) | 1 |
| 868 | Part # 12868 | Snap Ring, A500 Overdrive Ring Gear To Output Shaft | 1 |
| 877 | Part # 12877 | Snap Ring, A904/A500 Forward Clutch (Bottom, Wavy) (.119”Thick) 1960-65 | 1 |
| 878 | Part # 12878 | Snap Ring, A904/A500 Forward / Direct Clutch (.061”) (Top, Flat) 1960-Up | 1 |
| 878 | Part # 12878A | Snap Ring, A904/A500 Forward & Direct Clutch (Top, Wavy) | 1 |
| 878 | Part # 12878AA | Snap Ring, A904/A500 Rear Clutch (.076”) (Top, Flat) | — |
| 878 | Part # 12878AB | Snap Ring, A904/A500 Rear Clutch (.098”) | — |
| 878 | Part # 12878AC | Snap Ring, A904/A500 Forward Clutch (Rear Clutch) (.085”) (Top, Flat) | — |
| 879 | Part # 12879 | Snap Ring, A904/A500 Holds Retainer To Direct Drum | 1 |
| 880 | Part # 12880 | Snap Ring, A904/A500 Holds Input Shaft To Forward Drum | 1 |
| 881 | Part # 12881 | Snap Ring, A904/A500 Front Planet To Front Ring Gear | — |
| 882 | Part # 12882 | Snap Ring, A904/A500 Front & Rear Ring Gear To Hub (4”OD) Fits All Rear & The Small Front Planet Ring Gear To Hub | — |
| 882 | Part # 12882B | Snap Ring, A904/A500 Front Planet Ring Gear To Hub (4 1/2”OD) Fits The Large Front Planet Ring Gear | 1 |
| 884 | Part # 12884 | Snap Ring, A904/A500 Front Sun Gear | 1 |
| 888 not on diagram | Part # 12888 | Retainer, A904/A500 Governor | — |
| 889 not on diagram | Part # 12889 | Snap Ring, A904 Holds Governor To Output Shaft | — |
| 890 | Part # 12890 | Snap Ring, A904/A500 Rear Support To Rear Hub 1988-E92 | 1 |
| 891 | Part # 12891 | Snap Ring, A500 Holds Bearing #271 On Output Shaft | 1 |
| 892 | Part # 12892 | Snap Ring, A500 Oil Distributor Rear | 1 |
| 893 | Part # 12893 | Snap Ring, A500 Output Bearing To Output Shaft | 1 |
| 894 | Part # 12894 | Snap Ring, A904/A500 Front Planet To Output Shaft (.040”) | 1 |
| 894 | Part # 12894A | Snap Ring, A904/A500 Holds Front Planet To Output Shaft (.062”) | 1 |
| 894 | Part # 12894B | Snap Ring, A904/A500 Holds Front Planet To Output Shaft (.084”) | 1 |
| 895 not on diagram | Part # 12895 | Snap Ring, A904 Holds Rear Bearing To Output Shaft | — |
| 896 | Part # 12896 | Sanp Ring, A904/A500 Holds Front Servo In | — |
| 897 | Part # 12897 | Snap Ring, A904 Holds Output Shaft Bearing To Extension Housing (W/2 Ears) | 1 |
| 897 | Part # 12897A | Snap Ring, A500 Holds Output Shaft Bearing To Extension Housing (W/2 Ears) | 1 |
| 898 | Part # 12898 | Snap Ring, A500 Overdrive Support To Output Shaft | 1 |
| 906 | Part # 12906 | Spring, A904 Front Servo 1960-66 (1.690” Long)(.830”OD) | — |
| 909 | Part # 12909 | Retainer, A904 Front Servo Spring 1960-66 (2.120’”OD) | — |
| 911 | Part # 12911 | Spring, A904/A500 Rear Servo 1960-Up (1.780”OD) | — |
| 913 | Part # S12913K | Pin/Plug, A727/A518/A618/48RE Reverse Servo (Sonnax) (Contains: Pin/Plug, O-Ring & Retaining Ring) | — |
| 914 | Part # 12914 | Retainer, A904/A500 Rear Servo Spring 1960-65 (2.393”OD) | — |
| 917 | Part # 12917-1 | Lever, A904/A500 Rear Band(For Rigid Band) | — |
| 917 | Part # 12917-4 | Reaction Pin, A904/A500 Rear Band (3.132”Long) (No O-Ring Groove) 1960-65 | 1 |
| 917 | Part # 12917A-1 | Lever, A904/A500 Rear Band (For Double Wrap Band) | 1 |
| 919 | Part # 12919 | Adjusting Screw, A904/A500 Front Band 1960-Up (2.875”Long) | 1 |
| 926 | Part # 22926 | Spring, A404/A413/A470/A670 Accumulator Return (1.525” Tall) | 2 |
| 926 | Part # 32926 | Spring, A404/A413/A470/A670 Accumulator Return (1.060” Tall) | — |
| 936 not on diagram | Part # 12936K | Spring, A500 3-4 Accumulator (.060”OD Wire) (2.750” Long) | — |
| 936 not on diagram | Part # 22936 | Spring, A500 3-4 Accumulator (.122”OD Wire) (2.350” Long) | — |
| 974 | Part # 12974 | Spring, A904/A500 Forward Return Spring (5.030:OD) 1960-89 (Can Use 12974A) | 1 |
| 985 | Part # 12985 | Retainer, A904/A500 Direct Clutch Spring 1960-Up | 1 |
| 989 not on diagram | Part # 12989 | Retainer, A904 Sprag (W/4 Bolt Rear Support) 1960-88 | 1 |
| 989 not on diagram | Part # 12989A | Retainer, A904 Sprag (W/6 Bolt Rear Support) 1987-Up | — |
| 994 | Part # 12994 | Park Rod, A904 | — |
| 994 | Part # 12994A | Park Rod, A500 | 1 |
| 996 | Part # 12996 | Fitting, A727 Cooler Line (5/16” Line x 1/8” Pipe) Screw In Flared 62-Up | — |
| 996 | Part # 12996B | Fitting, A727 Cooler Line (90 Degree Elbow) (5/16” Line x 1/8” Pipe) Screw In Flared (Can Use 26996) 62-Up | — |
| 996 | Part # 12996C | Fitting, A727/A518/A618/48RE Cooler Line (3/8” Line x 1/4” Pipe) 1/4” Screw In Flared Male (On Case Side) For Push In… | — |
| 996 | Part # 12996D | Fitting, A500 Cooler Line (3/8” Line x 1/4” Pipe) Push In With Wire Type Clip | — |
| 996 | Part # 22996A | Fitting, A500 Cooler Line (3/8” Line x 1/4” Pipe) Push In (Gas) | 1 |
Before you order
Verify the number before ordering: compare it with the part you have and the transmission model.
Report an error
This feature is in progress and will be available soon.